DI No.

DM / CL / F / 02
Daily Maintenance Check List Rev No. 00
Machine Name : Machine No: Month: Rev. Date 03.06.19
Date
S.No Photo Activity Parameter Method of Checking
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

1 Check the Machine clean Inside Free from Dust, Oil Visual
& Outside.

2 Remove the Burr and chips. Free from Burr Visual

3 Check Emergency Switch Working in Good Condition Press Emergrncy button with
ideal running

Check Lubrication level should

4 be max. And Lubrication Between Min & Max Level Indicator Visual
Pressure.

Check Motor (Spindle,

5 Free from Noise. Hydraulic, Lubrication, Turrent Free from abnormal Noise Listening
& Axis)Running Condition. (Free
from Noise).

Check the Cables and End

6 Terminals, Ground Earth should Free from Dent & Damages. Visual
be Tight

No any Abnormal
7 Noise & working of Check any Abnormal Noise &
AC Unit working Condition
Free from Noise & Working
Condition
Visual
AC Unit

8 Check the Oil Pressure Meter Ensure in Green level Pressure Gauge indicator in
Green Zone/ Visual

9 Check the Oil Level Indicator Ensure Between Low & High Visual

10 Check the Chuck Pressure 6~20Kg/Cm2 Pressure Gauge

Shift Incharge :

Maintence Incharge Sign :

Legend P If condition are ok × - If condition is Not OK / Inform to maintenance incharge & NP - If No Plan
Production Supervisor
Remarks:-
 DI No. DM / CL / F / 02
Daily Maintenance Check List Rev No. 00
Machine Name : Machine No: Month: Rev. Date 03.06.19
Method of Date
S.No Photo Activity Parameter Checking 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Check the Machine

1 clean Inside & Outside. Free from Dust, Oil Visual
(Free from Dust)

2 Hydradulic Oil Between Min & Max Visual

Level Indicator

3 Gear Oil Between Min & Max Visual

Level Indicator

Check Emergency Working in Good Press Emergrncy

4
Switch Condition button with ideal
running

5 Lubrication oil checking 20~40 Kg/Cm2 Pressure Gauge

6
Cutting Blade Tightness Free from loose & Anti Check with Spanner &
& Rotation Direction Clockwise Direction Visual

8
Clamping working Free from Struck up Check with with ideal
Condition running

10 Abnormal Noise Free from Abnormal Listening

Noise

Shift Incharge :

Maintence Incharge sign :

Legend P If condition are ok NP - If No Plan

× - If condition is Not OK / Inform to maintenance incharge & Production Supervisor
Remarks:-
 MONTH : APR'17
Doc.No F/QSP/MT/04
FORMATE Rev.No 1

Rev.Date 02.09.2013
MACHINE NAME : TRAUB MACHINE
DAILY MAINTENANCE CHECK LIST Page 1 of 1
MACHINE CODE : TR- 04

SL.NO CHECK POINT/ ACTION SPECIFICATION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Check the machine clean

1
out side

Check the machine clean

2
inside

1.3 Remove the Burr and

chips.

Check the chain tension

2 condition should be level
mentioned

3 Check the oil leakage

Check the all screw tight

4
condition should be tight

Check the all lubrication

5
parts in moving condition

Check the belt tension

6
condition should be tight

Check the bar feeder

7 working condition should
be working

Check the red mark on the

8 bolt & nuts to ensure the
tightness

Check the coolant oil level

9
condition max level

10 Check the working

condition for Limit Switch

Maintenance Department :

Production Department :

Remarks

Prepared By: Checked By: Approved By:

 Month
Daily Maintenance Check Sheet For LVDT
Page 1 of 1
Sl.No Check Point / Action Specification 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Check the Machine clean

1 Inside & Outside.
(Free from Dust)

Remove the Burr and chips

2 from the machine

Check all Sensors in

3 working condition

Check the cylinder

4 movement and condition
of Cleaning Brush

5 Check all the wiring Cables

Check all air hoses free

6 from damages

Check the Part clamping

7 Pressure

8 Check any Abnormal Noise No any Abnormal Noise

Line Incharge :

Remarks

Prepared By: Approved By:

 Month
Daily Maintenance Check Sheet For Stabilizer
Page 1 of 1

Sl.N Method of
Specification Activity Parameter 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
o Checking

Check the Stablizer

clean Inside & Outside Free from Dust, Oil Visual
1

2 Check oil level Between Min & Max Level Visual

Indicator

3 Check the Ouput voltage 235 - 245 V Ctrl Pannel Display

4 Check cable condition Free from damage Visual

Shift Incharge :

Maintence Incharge sign :

Legend P If condition are ok NP - If No Plan

× - If condition is Not OK / Inform to maintenance incharge & Production Supervisor
Remarks:-