Bosch Rexroth AG
Spare parts list Service Hydraulics
Bgm.-Dr.-Nebel-Str. 8
Material number: R901085992 97816 Lohr
Germany
Drawing: R961003074
Designation: CHECK VALVE SANDWICH PLATE
Z1S6E05-4X/V
Status of version: 05/2018 Date: 31.05.2018
Page: 1
Pos. Material number Designation Quantity
999 R961000838 SEAL KIT 1 UNIT L
SEALKIT06A-VR/RN5FACH
L = Assembly group D = Sealing element
Security notice:
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.
Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192
Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
Bosch Rexroth AG
Spare parts list Service Hydraulics
Bgm.-Dr.-Nebel-Str. 8
Material number: R901085992 97816 Lohr
Germany
Drawing: R961003074
Designation: CHECK VALVE SANDWICH PLATE
Z1S6E05-4X/V
Status of version: 05/2018 Date: 31.05.2018
Page: 2
L = Assembly group D = Sealing element
Security notice:
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.
Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192
Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
Bosch Rexroth AG
Spare parts list Service Hydraulics
Bgm.-Dr.-Nebel-Str. 8
Material number: R961000838 97816 Lohr
Germany
Drawing: RA51645935
Designation: SEAL KIT
SEALKIT06A-VR/RN5FACH
Status of version: 05/2018 Date: 31.05.2018
Page: 3
Pos. Material number Designation Quantity
10 R-RING 20 UNIT
L = Assembly group D = Sealing element
Security notice:
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.
Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192
Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
Bosch Rexroth AG
Spare parts list Service Hydraulics
Bgm.-Dr.-Nebel-Str. 8
Material number: R961000838 97816 Lohr
Germany
Drawing: RA51645935
Designation: SEAL KIT
SEALKIT06A-VR/RN5FACH
Status of version: 05/2018 Date: 31.05.2018
Page: 4
L = Assembly group D = Sealing element
Security notice:
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.
Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192
Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
