HD Synthetic Gear Oil 80W-140
HD Synthetic Gear Oil 80W-140 is specially formulated for heavy duty manual
transmissions, differentials, and transfer cases operating in severe service applications
(temperature extremes, extended drain intervals, etc.) and requiring an extreme pressure
API GL-5 gear lubricant. It is engineered from premium synthetic base stocks with additive
chemistry to provide extended protection from wear, rust, corrosion, heat and oxidation. It
meets a broad range of OEM specifications/requirements.
HD Synthetic Gear Oil 80W-140 contains extreme pressure additives, as well as rust,
oxidation and corrosion inhibitors to protect gears and bearings operated under a wide
variety of load conditions. The high and low temperature performance of this product
exceeds those of conventional SAE 140 & SAE 85W-140 hypoid gear lubricants.
Specifications and Approvals Applications
HD Synthetic Gear Oil 80W-140 is
HD Synthetic Gear Oil 80W-140*
specially formulated for heavy duty
API GL-5 manual transmissions, differentials and
API MT-1 transfer cases operating under sever
DANA SHAES-256 Rev C service applications (extreme
DANA SHEAS-429 Rev A temperatures, extended drain intervals
Eaton Axle Div. PS-037/163/109 etc.) and requiring an extreme pressure
Eaton Extended Warranty Coverage API GL-5 gear lubricant.
GE D50E9C
International TMS 6816
Mack GO-H/S, GO-J
Meritor 0-76-E&N, 0-76-B & O-80
MIL-PRF-2105E
SAE J2360
*Check owners’ manual before use.
Features and Benefits
Superior Protection excellent performance over broad
These extreme pressure (EP) lubricants temperature range. Further, since it
result in longer gear life by providing resists oxidation, it will last significantly
extremely high film strength and superior longer than conventional gear oils.
low temperature performance. They also
have anti-rust and anti-corrosion Reduced Maintenance
properties to further promote extended HD Synthetic Gear Oil 80W-140 Synthetic
gear and bearing life. Gear Oil translate directly into reduced
maintenance and less downtime. The
Long Drain Capable advanced Extreme Pressure additives
Extended drain, all-season lubrication – ensures excellent wear protection and
with extremely low channel points high enhances component life
viscosity indices, this lubricant provides
Keeping the world moving since 1866™
Serving more than 100 countries around the globe, Valvoline is a leading marketer, distributor and producer
of quality branded automotive and industrial products and services. Products include automotive lubricants
including MaxLife™, the first motor oil specifically formulated for higher-mileage vehicles; transmission
fluids; gear oils; hydraulic lubricants; automotive chemicals; specialty products; greases, and cooling system
products.
For more information on Valvoline products, programs and services please visit www.valvoline.com.au or
contact the Technical Hotline on 1800 804 658 for product recommendations.
Typical Properties
Typical property characteristics are based on current production. Whilst future production will conform to
Valvoline™ specifications, variations in these characteristics may occur.
HD Synthetic Gear Oil 80W-140 Typical
SAE Viscosity Grade 80W-140
Viscosity @ 100 °C, mm2/s, ASTM D445 30.6
Viscosity @ 40 °C, mm2/s, ASTM D445 284
Viscosity Index, ASTM D2270 146
Density @ 15°C, kg/L, ASTM D4052 0.902
Pour Point, °C, ASTM D5950 -33
Note: HD Synthetic Gear Oil 80W-140 may be unsuitable for use in some applications, always consult owners’ manual if in doubt.
This information only applies to products manufactured in the following location(s): Australia
Part Number Pack Size
1270.20 20L
1270.51 205L
Health and Safety
This product is not likely to present any significant health or safety hazards when used correctly in the right
application. Safety Data Sheet (SDS) is available on request via your local sales office or 1800 804 658 or
through our website www.valvoline.com.au
Protect the Environment
Take used oil to an authorized collection point. Do not discharge into drains, soil or water.
Storage
Storage We recommend to store all packages under cover. In case outside storage is unavoidable, drums
should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products
should never be stored above 60°C, exposed to hot sun or freezing conditions.
Author:
FM – Effective 03-07-2017
Replaces – 1270/02
