100% found this document useful (2 votes)
189 views3 pages

Electric Guitar Flying V 01 FHGZKC

dxf pdf

Uploaded by

Felipe Barros
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (2 votes)
189 views3 pages

Electric Guitar Flying V 01 FHGZKC

dxf pdf

Uploaded by

Felipe Barros
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Guitar Specifications:

Scale Length: 628.65mm (24.75”).


Fingerboard Radius: 304.8mm (12”).
Number Of Frets: 22.
Neck Profile: Modern C-Shaped.
Nut Width: 43.05mm (1.695").
End Of Board Width: 57.4mm (2.26").
Headstock Thickness: 14.6mm (0.575").
Neck Thickness:
- 1st Fret: 20.32mm (0.8").
- 12th Fret: 21.59mm (0.85").
Neck Joint: Glued In / Set Neck.
Truss Rod: Gibson Style.
Headstock Angle: 17°.
Joint Angle: 4°.
Inlays: Dots, Trapezoids.

NOTES:
Printing Instructions:
- Dimensions in millimeters (inches).
- Go into the plotter properties and change the paper size to
- Hardware used in this drawing: "ISO A0".
- Tune-O-Matic Bridge (Post Spacing: 73.99mm - 2.913"). - Uncheck where the page scaling shows "fit to printer margins".

- Stop Tailpiece (Post Spacing: 82.55mm - 3.25"). - Set page scaling to "none". Scale: Custom 1:1

- Humbucker (Mounting screw spacing: 3.063" - 77.8mm).


- 3+3 Tuning Machines (Mounting Screw Spacing: 0.945" - 24mm).
@LonelyStarGuitars
- If you are using different hardware check the dimensions before make any perforation or @LonelyStarGuitars
cavity, they can vary from different manufacturers.

LonelyStarGuitars.com

The content of this drawing is protected under international copyright and trademark laws. You may not copy,
reproduce, publish, transmit or distribute any information from this drawing without express written permission.

@LonelyStarGuitars
@LonelyStarGuitars

LonelyStarGuitars.com

The content of this drawing is protected under international copyright and trademark laws. You may not copy,
reproduce, publish, transmit or distribute any information from this drawing without express written permission.
FRET SPACING
Units In mm
Nut to Fret 1 1.39 35.28
Nut to Fret 2 2.70 68.59
Nut to Fret 3 3.94 100.02
Nut to Fret 4 5.11 129.69
Nut to Fret 5 6.21 157.69
Nut to Fret 6 7.25 184.13
Nut to Fret 7 8.23 209.08
Nut to Fret 8 9.16 232.63
Nut to Fret 9 10.03 254.85
Nut to Fret 10 10.86 275.83
Nut to Fret 11 11.64 295.63
Nut to Fret 12 12.38 314.33
Nut to Fret 13 13.07 331.97
Nut to Fret 14 13.73 348.62
Nut to Fret 15 14.34 364.34
Nut to Fret 16 14.93 379.17
Nut to Fret 17 15.48 393.17
Nut to Fret 18 16.00 406.39
Nut to Fret 19 16.49 418.86
Nut to Fret 20 16.95 430.64
Nut to Fret 21 17.39 441.75
Nut to Fret 22 17.80 452.24

@LonelyStarGuitars
@LonelyStarGuitars

LonelyStarGuitars.com

The content of this drawing is protected under international copyright and trademark laws. You may not copy,
reproduce, publish, transmit or distribute any information from this drawing without express written permission.

You might also like