®

Masoneilan Specification Data

™
30000 Series Varimax CN3002

Rotary Control Valve 6/03

Rotary Globe Valve

with Lo-dB Trim,
Adjustable Cv,
and Adjustable
Torque Actuator
 Table of Contents

Foreword..............................................................................2 Percent Rated CV Versus Percentage

A Major Advance in Control Valve Technology....................3 Plug Rotation Std. Plug ..............................................14
Numbering System ..............................................................4 Critical Flow Factor FL Versus
Connections .........................................................................4 Percentage Plug Rotation ..........................................14
Actuator Positions ................................................................5 Rated Flow Coefficient CV Lo-dB Trim...............................15
General Data ....................................................................6-8 Critical Flow Factor FL Lo-dB Trim.....................................15
Emission Free Seal..............................................................9 Percent Rated CV, Versus Percentage
Leak Detection or Purge Connection ...................................9 Plug Rotation Lo-dB Trim...........................................15
Materials of Construction ..............................................10-11 Flashing Service ................................................................16
Lo-dB Valve Body Subassembly Materials ........................12 Adjustable Travel/Torque Actuator ....................................16
Materials Versus Temperature...........................................13 Temperature Range/Seat Leakage....................................16
Rated Flow Coefficient CV Std. Plug ..................................14 Dimensions and Weights ..............................................17-19

Foreword

The new Varimax represents a major advance in the Varimax is the only control valve in today’s market with these
evolution of automatic throttling control valves. Its application unique design features.
envelope extends into the realm of globe valves.
Varimax Lo-dB® valves provide control of high pressure
The Varimax combines globe valve performance with the compressible fluids without the erosion, vibration and high
cost efficiency and compactness of a rotary design. A noise levels associated with conventionally designed rotary
patented seating concept permits rotation of the valve plug valves. Because of relatively large flow passages, Varimax
with zero break away torque. The result is globe valve Lo-dB valves are particularly well suited for applications
performance previously unavailable in a rotary valve design. involving gases. For high pressure ratios, Lo-dB cartridges in
the globe adaptor are recommended.
The new ATA (Adjustable Torque Actuator) incorporates a
new concept in control valve design which leads to improved
dynamic control characteristics.

2 Specification Data CN3002 5/03

Model 30000
 A Major Advance in Control Valve Technology

Valve Body Actuator Subassembly

Subassembly The ATA (Adjustable Torque Actuator) is the first rotary
actuator offering variable CV through adjustment of the output
travel while amplifying the output torque.
Rotary Globe
The Rotary Globe Body is
designed in accordance
with the I.E.C. 534-3-2
Standard.
This body will fit in place
of any conventional rotary
valve meeting this standard.

ATA Features
• The dynamic control characteristics are improved as
input travel remains constant regardless of the output
travel adjustments. In this way the sensitivity of the
positioner remains constant for any CV adjustment.
• Engineering modifications and changing process
Trim dynamics are handled simply through actuator
adjustment without changing control valve trim.

A New Seating Concept

Higher Pressure Drop Capabilities with Smaller Actuators
The trim (aerodynamically tested and patented) has been
designed to reduce the unbalanced forces to a minimum; • About 80% of all applications are handled with the
requiring lower actuator torque. Standard actuator size. However, a High Torque model is
available for very high pressure drop applications.

Convenient Yoke Design

• Allows actuator servicing, removal and remounting with
valve under line pressure.
• High Torque actuator will mount without modification.
• CV adjustment is possible without removing the valve
from the line.
Seat Ring Soft Seat Ring
Detail of the Section
Rugged Handwheel Design
• Field mountable, requiring no modification or additional parts.
• Install or remove “in-line” without disassembling valve.

Standard Adjustable Torque Limiter

• Automatic over torque limitation in seated position.
Standard Plug Lo-dB® Plug
Optional Adjustable Travel Limit stop

• Limits travel in both directions.

Specification Data CN3002 5/03

Model 30000
3
 Numbering System

Actuator Assembly Digits Body Assembly Digits

1st 2nd 1st 2nd 3rd 4th 5th

3 0

Actuator Body Actuator Trim Design

Type Series Mounting Type Series
20 Manual Actuator 30 1 Parallel to pipeline, 1 Undefined 2 Rotary
30 Spring-opposed valve closes on stem extension 2 Metal seat IV Globe
rolling-diaphragm 2 Parallel to pipeline, 3 Soft seat VI +1 Standard
valve opens on stem extension 4 Lo-dB STD Globe
3 Perpendicular to pipeline, Metal Seat +3 Flangeless
valve closes on stem extension 5 Lo-dB Hi-CAP
4 Perpendicular to pipeline, Metal Seat
valve opens on stem extension 6 Lo-dB STD
5 Parallel to pipeline, Soft Seat
valve closes on stem extension 7 Lo-dB Hi-CAP
6 Parallel to pipeline, Soft Seat
valve opens on stem extension
7 Perpendicular to pipeline,
valve closes on stem extension
8 Perpendicular to pipeline, Standard Configuration
Optional
valve opens on stem extension

Connections

Connections and Face-to-Face

Standard Configuration Optional Configuration

Rotary Globe Body Standard Globe Body Flangeless Body
Valve Size
Face-to-face IEC-534-3-2 Face-to-face IEC-534-3 Face-to-face ➀
EN558-1&2 EN558-1&2 (ANSI B16.10)
Flanged Flanged Flangeless

For ANSI Class RF Flanges For ANSI Class RF Flanges For ANSI Class RF Flanges ➁
inches mm 150-300 600
150-300 600 150-300 600

3 to 80 to ❏ ❏ ❏ ❏ ❏ ❏
16 400

❏ Available
➀ Refer to pages 17 & 19 for dimensions.
➁ Clamps between Flanges.

4 Specification Data CN3002 5/03

Model 30000
 Actuator Positions

Notes:
1. Recommended actuator mounting positions are shaded.
2. Recommended flow directions are shown by the black arrows. } When no specific position is indicated on the specification sheet,
the Varimax will be delivered: Air-to-Open, Position 2
3. Plug positions are shown in the initial position without air on actuator.
4. All available configurations are shown in order to meet requirements of all field situations.
5. Action and orientation field reversible without additional parts.
6. To minimize the overall dimensions of a Std. Globe configuration with face-to-face dimensions corresponding to the IEC 534-3
(ANSI B16.10) standard, the globe adapter will be mounted on the same side as the ATA cylinder.

Specification Data CN3002 5/03

Model 30000
5
 General Data

Body
type: Rotary Globe
face-to-face conforms to
I.E.C. 534-3-2*
size: 3” to 16” (80mm to 400mm)
rating: ANSI Class 150, 300, 600
(per B 16.34) standard
3” to 16” (80mm to 400mm)
flow direction: flow to open or flow to close
materials: Carbon Steel ASTM A216 Gr. WCC
Stainless Steel ASTM A351 Gr. CF8M Rotary Globe
packing: PTFE/Kevlar ® (285 K - asbestos I.E.C. 534-3-2 face-to-face*
free); flexible graphite (optional) (Standard Plug)
*EN Standard: EN558-1 & 2
end connections: flanged ANSI 150, 300 or 600
temperature range: -20 to 650°F (-29 to 343°C)
(carbon steel bodies)
-320 to 750°F (-196 to 399°C)
(stainless steel bodies)
yoke: Carbon Steel
body option: in addition to its standard Rotary Globe
body, Varimax offers the additional
advantage of two supplementary body
options for specific application:
• The Standard Globe which conforms to I.E.C. 534-3
(ANSI B16.10) face-to-face, can be
supplied with a built-in downstream Optional Standard Globe Flangeless Body
Lo-dB® cartridge which conforms to Body with a Lo-dB® Trim and (Standard Plug)
I.E.C. 534-3 (ANSI B16.10) face-to- a Built-in Downstream
face. The Lo-dB cartridge is mounted Lo-dB® cartridge I.E.C 534-3
directly in the globe adaptor. With this (ANSI B16. 10) face-to-face*
combination, a noise reduction of up to
20 dBA can be economically achieved.
The Standard Globe body with a
built-in Lo-dB cartridge can replace a
conventional globe valve that generates
excessive noise levels due to changes
in service conditions. The globe adaptor
can also be supplied with an oversized
outlet connection which includes an
oversized Lo-dB cartridge.
• The Flangeless option is light weight with short body
face-to-face, thus avoiding tie rod
thermal extension problems on high
temperature service. Lo-dB® option
not available.

Standard Globe Body

with an Oversized Outlet Connection
*EN Standard: EN558-1 & 2

6 Specification Data CN3002 5/03

Model 30000
 General Data

Standard Trim Reduced One Size Trim Lo-dB® Trim

(Flashing Service)

Trim
standard plug type: eccentrically rotating, materials (cont.): metal seat ring
aerodynamically shaped to • 316 stainless steel or
reduce unbalanced forces and
to increase flow coefficient. • Solid stellite #6 or
seat type: solid clamped • 316 stainless steel with hard
surfaced seat
Lo-dB: The Lo-dB Trim is designed for
®

severe service application on soft seat ring

compressible fluids • 316 stainless steel with
Two basic trim designs: PTFE-Ni insert (to 232°C)
types 4 & 6: Lo-dB® standard spacing washer (Lo-dB only)
positioning washer and
types 5 & 7: Lo-dB HI-CAP
®
seat ring retainer
capacity: • seven different rated CV • 316 stainless steel
values are available for each flow characteristic: linear
valve size, (see page 10). (equal percentage and linear
• reduced trim/one size reduction split range are available
(optional) for flashing service, depending on the selection of
(ex. 100mmx80mmx100mm) the positioner cam)
denotes a 80mm trim in a CV ratio: 100: 1 for all 7 rated CV
100mm body).
seat leakage: class IV as per ANSI/FCI
soft seat: 80mm to 400mm (See detail page 2) 70-2/IEC 534-4
materials: plug (with metal seat ring)
• 316 stainless steel or class VI as per ANSI/FCI
70-2/IEC 534-4
• solid stellite #6 or (with soft seat ring)
• 316 stainless steel with hard
surfaced seat
shaft (blow-out proof)
• splined type
• for carbon steel bodies:
—17-4 PH
• for stainless steel bodies:
—for chemical applications:
316 St. St. (Nitronic 50®
optional)
—for saturated steam
applications:
17-4 PH

Specification Data CN3002 5/03

Model 30000
7
 General Data

Actuator
type ATA®: Adjustable Torque Actuator
allows simultaneous CV and
torque adjustments. Spring
opposed/Rolling Diaphragm
type
sizes: Nos 5, 7, 9 and 13
The Adjustable
spring range: 7-25 psi (w/ Standard or Torque Actuator
Hi-torque ATA)
limit stop: limitation of torque in closed
position avoids shaft damage
for any CV adjustment
material: • die cast aluminum limit stop: optional, adjustable between
(bracket, spring-barrel, 70 and 100% in open position;
diaphragm case and piston), 0 and 30% in closed position.
• Buna-N diaphragm with
dacron fabric,
• carbon steel levers
action: air to close or air to open
air connection: 1/4” NPT (1/2” for ATA 13)
handwheel: optional Direct Handwheel
• separate subassembly
model 20: ATA with direct
unit,
handwheel (without
• may be easily mounted pneumatic cylinder)
during installation or while
valve is in service,
• low rim force,
• Type No 5, 7, 9

Model 20
Direct Handwheel

Handwheel

8 Specification Data CN3002 5/03

Model 30000
 EF Seal ® (Emission Free)

EF Seal
Double O-Ring Seal Packing Follower
Fugitive Emission Containment Packing for low emissions

To prevent fugitive emissions, Masoneilan offers a double O-ring sealed

packing box.
This economical solution to fugitive emissions will not compromise control
performance as it is used in environmentally sensitive applications.

Leak Detection or Purge Connection

Double Packing with Leak Detection or Purge Connection

Double packing design offers a monitoring port or purge connection.

Specification Data CN3002 5/03

Model 30000
9
Materials of Construction

Detail of the limit-stop

in open position

Detail of the two torsion

pins (33) located 45 degrees
apart from body studs (17)
(on 100mm to 400mm valve sizes)

10 Specification Data CN3002 5/03

Model 30000
 Materials of Construction

Standard Valve Body Subassembly Materials Standard Actuator Subassembly Materials

❶ Standard Configuration.
❷ Optional.
❸ Included in Optional Standard Globe (Not Shown).

Note: Available with NACE Certified Materials.

Specification Data CN3002 5/03

Model 30000
11
 Lo-dB Valve Body Subassembly Materials

Seat Ring Seat Lo-dB Body (1) Yoke (10) Valve Upper Spacing Lo-dB Valve Lower Spacing
Retainer (5) Ring (3) Plug (2) Shaft (8) Washer (30) Plug (2) Body (1) Washer (31)

Upper Guide Lower Guide

Bushing (7) Bushing (6)

Note : The plug and the spacing washers are the

only parts which make the difference between
a Lo-dB and a Standard Varimax.

Ref.
Part Carbon Steel Construction Stainless Steel Construction
No
1 Body A216 Gr. WCC A351 Gr. CF8M
10 Yoke Carbon Steel Carbon Steel
Seat Ring
5 A351 Gr. CF8M A351 Gr. CF8M
Retainer
8 Shaft 17-4 PH (H1075) St. St. 316 St. St. (Nitronic 50 optional)
Guide ➀
6&7 440 C Stellite #6
Bushings
Spacing
30 & 31 316 St. St. 316 St. St.
Washers
Trim Set T1 ❷ T2 ❷ T3 ❸ T4 ❹ T1 ❷ T2 ❷ T3 ❸ T4 ❹
2 Lo-dB Plug 316 St. St. 316 St. St. Stellite ➀ 316 St. St. 316 St. St. 316 St. St. Stellite ➀ 316 St. St.
3 Seat Ring 316 St. St. Stellite ➀ Stellite ➀ 316 St. St.+PTFE-Ni 316 St. St. Stellite ➀ Stellite ➀ 316 St. St.+PTFE-Ni

① Stellite denotes either Solid Stellite or 316 St. St. with Stellite Hardfacing (as per following table).

➁ T2 is mandatory when ∆P shut-off exceeds:

Size
3 4 6 8 10 12 16
(in.) 180 psi/12 bar for 3” to 6” (80mm to 150mm) valves.
Seat Ring S S S S HF HF HF
120 psi/8 bar for 8” to 16” (200mm to 400mm) valves.
➂ T3 is available in std. plug configuration only.
S denotes:
Solid Stellite No 6 ➃ T4 corresponds to class VI seat leakage.
HFdenotes: (T1 thru T3 are all class IV seat leakage.)
316 St. St. with Hardfaced (s
s tellite No 6)
s eating s urface.

12 Specification Data CN3002 5/03

Model 30000
 Materials Versus Temperature

Specification Data CN3002 5/03

Model 30000
13
 Rated Flow Coefficient CV
Standard Plug Configuration

inches mm

80

100

150

200

250

300

400

Percent Rated CV, Versus Percentage Plug Rotation

Standard Plug Configuration

Critical Flow Factor FL Versus Percentage Plug Rotation

Actuator Adjustment
Percent of
A B C D E F G
Rotation
FTO FTC FTO FTC FTO FTC FTO FTC FTO FTC FTO FTC FTO FTC
100 0.77 0.79 0.80 0.81 0.80 0.81 0.81 0.81 0.83 0.82 0.86 0.84 0.89 0.85
90 0.80 0.81 0.80 0.81 0.82 0.81 0.83 0.82 0.85 0.83 0.87 0.85 0.89 0.85
80 0.80 0.81 0.81 0.82 0.83 0.82 0.86 0.84 0.87 0.83 0.89 0.85 0.90 0.86
70 0.81 0.81 0.83 0.82 0.85 0.83 0.86 0.84 0.89 0.85 0.89 0.86 0.90 0.86
60 0.83 0.82 0.86 0.84 0.87 0.84 0.89 0.85 0.89 0.86 0.90 0.86 0.91 0.87
50 0.86 0.84 0.89 0.85 0.89 0.85 0.90 0.86 0.90 0.87 0.90 0.87 0.91 0.88
40 0.89 0.85 0.90 0.86 0.90 0.86 0.90 0.86 0.90 0.87 0.91 0.88 0.92 0.89
30 0.90 0.86 0.90 0.87 0.90 0.88 0.91 0.88 0.91 0.88 0.92 0.89 0.93 0.90
20 0.91 0.88 0.91 0.89 0.91 0.90 0.92 0.90 0.92 0.91 0.93 0.90 0.93 0.91
10 0.93 0.90 0.93 0.90 0.93 0.91 0.94 0.92 0.94 0.92 0.95 0.93 0.95 0.93
FTO : Flow-To-Open FTC : Flow-to Close

14 Specification Data CN3002 5/03

Model 30000
 Rated Flow Coefficient CV
Lo-dB Trim Configuration

Actuator Adjustment
Valve Size
A B C D① E F G
STAND. HIGH STAND. HIGH STAND. HIGH STAND. HIGH STAND. HIGH STAND. HIGH STAND. HIGH
inches mm CAP. CAP. CAP. CAP. CAP. CAP. CAP. CAP. CAP. CAP. CAP. CAP. CAP. CAP.

3 80 55 — 50 — 44 — 39 — 33 — 28 — 22 —

4 100 90 — 80 — 72 — 63 — 54 — 45 — 36 —

6 150 210 260 190 220 170 185 145 125 105 85

8 200 360 435 325 370 290 310 250 215 180 145

10 250 620 745 560 645 495 535 435 370 310 250

12 300 1000 1200 900 1035 800 865 700 600 500 400

16 400 1750 2100 1575 1810 1400 1510 1225 1050 875 700

➀ When no specific adjustment is indicated on the specification sheet, the Varimax will be delivered:
Set at mid band setting or “D” adjustment and Flow-to-Close

Critical Flow Factor FL

Lo-dB Trim - Nominal Travel

Actuator Adjustment
Lo-dB Plug
A B C D E F G
STANDARD .85 .83 .82 .81 .81 .81 .81
CAPACITY
HIGH
CAPACITY .80 .80 .80 .81 .81 .81 .81

Percent Rated CV, Versus Percentage Plug Rotation

Lo-dB Trim

Flow Lo-dB Actuator Percent Nominal Opening

Direction Trim Adjustment
Type 10 20 30 40 50 60 70 80 90 100
HIGH A 8.3 16.7 25.0 33.3 41.7 50.0 58.3 72.2 86.1 100.0
CAPACITY
B 8.7 17.4 26.1 34.8 43.5 52.3 61.0 71.0 85.5 100.0
Types
Flow to 5&7 C 9.2 18.5 27.7 36.9 46.2 55.4 64.6 73.8 84.6 100.0
Open STANDARD
and CAPACITY D
Flow to Types
4&6 E
Close 10.0 20.0 30.0 40.0 50.0 60.0 70.0 80.0 90.0 100.0
& HIGH F
CAPACITY
Types G
5&7

Specification Data CN3002 5/03

Model 30000
15
 Flashing Service
ATA No. and Rated CV

inches mm
100 x 80 x 100

150 x 100 x 150

200 x 150 x 200

250 x 200 x 250

300 x 250 x 300

400 x 300 x 400

Adjustable Travel /Torque Actuator

(Characteristics and Travel Times)

ATA No Travel Time (sec.)

Valve Diaphragm Actuator 4700A 4800A
Size High Effective Stroke
Standard Torque ATA Area
in. mm No. Increasing Decreasing Increasing Decreasing
Instrument Instrument Instrument Instrument
3 80 5 sq. in. cm 2 in. mm Signal Signal Signal Signal

4 100 5 5 17.7 114 5.1 132 2.9 3.6 1.1 1

6 150 5 7 7 34.8 225 5.9 152 5.6 8.9 1.6 1.5

8 200 5 7 9 74.7 482 7.6 195 17 24 4.5 3.7

10 250 7 9 13 149 962 7.6 195 10 8

Measured with direct positioner at 40psi (2.8 bar).
12 300 7 9 4700A positioner with tubing size 1/4 in. (4 x 6mm).
4800A positioner with tubing size 3/8 in. (6 x 8mm).
16 400 9 13*

* Only in positions A, B, and C.

Temperature Range/Seat Leakage

Temperature Gradient Across Bonnet

Valve Temperature Range Seat Leakage
Seat 750°F 400°C
Size Minimum Maximum ANSI/FCI 70-2
Type 650°F 340°C

in. mm US Metric US Metric Class 550°F 300°C

3 80 Metal - 320°F * - 196°C + 750°F + 399°C IV 450°F 230°C

350°F 180°C
to to
250°F 120°C
16 400 Soft Seat - 260°F * - 162°C + 450°F + 232°C VI
150°F 70°C

* Stainless Steel Bodies Only

The technology of the Varimax valve significantly reduces

the required plug torque.
This advantage allows a smaller shaft diameter and a
smaller external diameter of the integrally cast bonnet neck.
The resulting accelerated thermal gradient reduces the
temperature at the packing.

16 Specification Data CN3002 5/03

Model 30000
 Dimensions and Weights/Metric

Dimensions in mm
❹
Valve A* H* ❷ ❸ Valve Weight ❺ (kg)
Size ATA ANSI B C D E F G J K L M N1
mm No Class Standard Rotary Flange- Standard Rotary Flange- N 2 Standard Rotary Flange- H/W
Globe Globe less ❶ Globe Globe less Globe Globe less
150 298,5 205 145 216 38 28
80 min. max. 0
5 300 317,5 165 54 295 420 205 240 165 55 235 83 35,5 314 86 231,5 255 49 32 22 4
min. 18
600 336,5 max. min. 254 55 35
150 352,5 205 145 256 56 37
100 min. max. 0
5 300 368,5 194 64 295 420 205 240 165 272 97 43 356 110 273,5 255 71 44 24 4
55 min. 18
600 393,5 max. min. 297 92 52
150 451 205 145 337 87 56
13
5 300 473 229 78 min. 420 205 240 165 max. 359 114 55 472 150 389,5 317 121 71 35 4
295 55 min. 25
150 600 508 max. min. 394 174 92
150 451 245 210 337 105 74
min. max. 13
7 300 473 229 78 353 510 245 240 216 102 359 114 55 494 150 386,0 317 139 89 53 5
min. 25
600 508 max. min. 394 192 110
150 543 205 145 422 109 70
mini 23
max.
5 300 568,5 243 102 295 420 205 240 165 55 447 121 69 513 170 430,5 317 161 95 46 4
min. 68
200 600 609,5 max. min. 488 277 147
150 543 245 210 422 127 88
min. 23
7 300 568,5 243 102 510 245 240 216 max. 447 121 69 535 170 427,0 317 179 113 64 5
353 102 min. 68
600 609,5 max. min. 488 295 165
150 673 245 210 525 201 130
min. max. 23
7 300 708 297 117 510 245 240 216 560 148 75 660 220 552,0 370 282 166 99 5
353 102 min. 68
250 600 752,5 max. min. 604 468 248
150 673 340 257 525 247 176
min. 23
9 300 708 297 117 670 330 400 305 max. 560 148 75 692 220 539,5 370 328 212 145 9
475 122 min. 68
600 752,5 max. min. 604 514 294
150 737 245 210 568 269 174
min. max. 35
7 300 775 338 140 353 510 245 240 216 606 169 83,5 690 270 582,0 370 375 221 128 5
102 min. 75
300 600 819 max. min. 650 590 313
150 737 340 257 568 315 220
35
300 775 338 140 min. 670 330 400 305 max. 606 169 83,5 722 270 569,5 370 421 267 174 9
9
475 122 min. 75
600 819 max. min. 650 636 359
150 1016 340 257 816 619 400
400
9 300 1057 400 197 min. 670 330 400 305 max. 857 200 109 829 295 676,5 370 58 815 480 300 9
475 122 min. 107
600 1108 max. min. 908 1225 648
150 1016 340 257 816 694 474
400 min.
13 300 1057 400 197 904 450 max. 857 200 109 829 295 500 370 58 890 554 375
475 122 min. 107
600 1108 max. min. 908 1300 723

* Standard Globe (IEC 534-3 — ANSI B16-10) ❶ Not available with Lo-dB plug. ❹ Only on flangeless valves when the plug is open.
* Rotary Globe (IEC 534-3-2) ❷ Only on flangeless valves. ❺ Shipping weights are approximately 10% higher.
❸ ATA Adjusting clearance.

Specification Data CN3002 5/03

Model 30000
17
Dimensions and Weights/US

❶ Not available with Lo-dB plug ❹ Only on flangeless valves when the plug is open
❷ Only on flangeless valves ➎ Shipping weights are approximately 10% higher
❸ ATA Adjusting clearance

18 Specification Data CN3002 5/03

Model 30000
 Dimensions and Weights

Rotary Globe (Standard Configuration)

Standard Globe

Flangeless

Specification Data CN3002 5/03

Model 30000
19
 SALES OFFICE LOCATIONS
Americas International
BRAZIL BELGIUM ITALY SINGAPORE
Dresser Industria E Comercio Ltda Dresser Valves Europe Dresser Italia S.r.l. Dresser Sinagpore PTE Ltd.
Divisao Masoneilan 281-283 Chaussée de Bruxelles, Masoneilan Operations 16 Tuas Avenue 8
Rua Senador Vergueiro, 433 1190 Brussels, Belgium Via Cassano, 77 Singapore 639231
09521-320 Sao Caetano Do Sul Phone: +32-2-344-0970 80020 Casavatore, Napoli Italy Phone: +65-6-861-6100
Sao Paolo, Brazil Fax: +32-2-344-1123 Phone: +39-081-7892-111 Fax: +65-6-861-7197
Phone: 55-11-453-5511 Fax: +39-081-7892-208
Fax: 55-11-453-5565 CHINA South Africa
Dresser Flow Control, Beijing Rep. Office JAPAN Dresser Limited
CANADA Suite 2403, Capital Mansion Niigata Masoneilan Co. Ltd. (NIMCO) P.O. Box 2234
Alberta 6 Xinyuannan Rd. Chaoyang District 20th Floor, Marive East Tower 16 Edendale Road
Dresser - Masoneilan Beijing 100004, China WBG 2-6 Nakase, Mihama-ku, Chiba-shi Eastleigh, Edenvale 1610
DI Canada, Inc. Phone: +86-10-8486-5272 Chiba 261-7120 Japan Republic of South Africa
Suite 1300, 311-6th Ave., S.W. Fax: +86-10-8486-5305 Phone: +81-43-297-9222 Phone: +27-11-452-1550
Calgary, Alberta T2P 3H2, Canada Fax: +81-43-299-1115 Fax: +27-11-452-6542
Phone: 403-290-0001 FRANCE
Fax: 403-290-1526 Dresser Produits Industriels S.A.S. KOREA SPAIN
Ontario 4, place de Saverne Dresser Korea Inc. Masoneilan S.A.
Dresser - Masoneilan 92971 Paris La Défense Cedex, France 2015 Kuk Dong Building 60-1 C/Murcia 39 C
DI Canada, Inc. Phone: +33-1-4904-9000 3-Ka, Choongmu-ro Chung-Ku 08830 Sant Boi de Llobregat
5010 North Service Road Fax: +33-1-4904-9020 Seoul, Korea Barcelona, Spain
Burlington, Ontario L7L 5R5, Canada Phone: +82-2-2274-0792 Phone: +34-93-652-6430
Phone: 905-335-3529 Dresser Produits Industriels S.A.S., Ma- Fax: +82-2-2274-0794 Fax: +34-93-661-3450
Fax: 905-336-7628 soneilan Customer Service Centre
55 rue de la Mouche, Zone Industrielle KUWAIT Masoneilan S.A.
MEXICO 69540 Irigny, Lyon 69540, France Dresser Flow Control Calle Mayor, 16 B, 1°E
Dresser Valve de Mexico, S.A. de C.V. Phone: +33-4-72-39-06-29 Middle East Operations 48930 Las Arenas
Henry Ford No. 114, Esq. Fulton Fax: +33-4-72-39-21-93 10th Floor, Al Rashed Complex Vizcaya, Spain
Fraccionamiento Industrial San Nicolas Fahad Salem Street, P.O. Box 242 Phone: +34-94-463-9600
54030 Tlalnepantla Estado de Mexico GERMANY Safat, 13003, Kuwait Fax: +34-94-463-9453
Phone: 52-5-310-9863 Dresser Valves Europe GmbH Phone: +965-9061157
Fax: 52-5-310-5584 Heiligenstrasse 75 Fax: +965-3718590 UNITED ARAB EMIRATES
Viersen D-41751, Germany Dresser Flow Control
UNITED STATES Phone: +49-2162-8170-0 MALAYSIA Middle East Operations
Northern Region Fax: +49-2162-8170-280 Dresser Flow Control P.O. Box 61302
Dresser -Masoneilan Business Suite, 19A-9-1, Level 9 Roundabout 8
85 Bodwell Street Dresser Valves Europe GmbH UOA Centre, No. 19, Jalan Pinang Units JA01 & JA02
Avon, MA 02322-1190 Uhlandstrasse 58 50450 Kuala Lumpur, West Malaysia Jebel Ali Free Zone
Phone: 508-586-4600 60314 Frankfurt, Germany Phone: +60-3-2163-2322 Dubai, U. A. E.
Fax: 508-427-8971 Phone: +49-69-439350 Fax: +60-3-2161-1362 Phone: +971-4-8838-752
Fax: +49-69-4970802 Fax: +971-4-8838-038
Southern Region THE NETHERLANDS
Dresser - Masoneilan Dresser Valves Europe GmbH Dresser Valves Europe Dresser Flow Control
2135 Highway 6 South Rudolf -Breitscheid-Str.18 Steenhouwerstraat 11 Abu Dhabi Office
Houston, TX 77077 06237 Leuna, Germany 3194 AG Hoogvliet, The Netherlands 12th Floor, Bin Hamoodah Bldg.
Phone: 281-496-8100 Phone: +49-3461-434443 Phone: +31-10-438-4122 Khalifa Street, P.O. Box 203
Toll Free: 800-847-1099 Fax: +49-3461-434446 Fax: +31-10-438-4443 Abu Dhabi, U. A. E.
Fax: 281-596-4222 Phone: +971-2-6265-734
INDIA NIGERIA Fax: +971-2-6265-735
South Texas Operations Dresser Valve India Pvt. Ltd. Dresser Flow Control
Dresser - Masoneilan 305/306, "Midas", Sahar Plaza Plot 293, Akin Olugbade Street UNITED KINGDOM
4841 Leopard Street Mathurdas Vasanji Road Victoria Island, Lagos, Nigeria DI U.K. Ltd.
Corpus Christi, TX 78408-2621 J.B. Nagar, Andheri East Phone: +234-1-555-4229 East Gillibrands
Phone: 361-877-2414 Mumbai, 400059, India Fax: +234-1-555-7969 Skelmersdale, Lancashire WN8
Fax: 361-584-1196 Phone: +91-22- 8381134 9TU, England
Fax: +91-22-8354791 RUSSIA Phone: +44-1695-52600
Elliott Valve Operations DS Controls Fax: +44-1695-50569
5436 Clay Street Dresser Valve India Pvt. Ltd. Nekhinskaya Street, 61
Houston, TX 77023 205, Mohta Building Veliky Novgorod DI U.K. Ltd.
Phone: 713-926-8318 4 Bhikaiji Cama Place Russia, 173021 Unit 4, Suite 1.1, Nobel House
Fax: 713-926-1430 New Delhi, 110 066, India Phone: +7-8162-11-3099 Grand Union Office Park
Phone: +91-11-6164175 Fax: +7-8162-11-2981 Packet Boat Lane
Masoneilan Aftermarket Fax: +91-11-6165074 Uxbridge, Middlesex UB8 2GH
Sales & Service Center SAUDI ARABIA Phone: +44-1895-454-900
16030 Bear Bayou Drive Dresser Valve India Pvt. Ltd. Dresser Flow Control Fax: +44-1895-454-917
Channelview, TX 77530 Flat No. A/1, Uma Apartments 13, c/o Al-Rushaid Trading Co.
Phone: 281-862-1500 4th Main Road, P.O. Box 31684
Fax: 281-862-1550 United India Colony, Kodambakkam Al-Khobar 31952, Saudi Arabia
Chennai, 600 024, India Phone: +966-3-893-3333 (xt 237)
Western Region Phone: +91-44-480-2393 Fax: +966-3-864-7064
Dresser - Masoneilan Fax: +91-44-484-8827
Masoneilan Dresser AL Rushaid
2950 East Birch Street Valve & Instrument Co., Ltd. (Darvico)
Brea, CA 92821 P.O. Box 10145
Phone: 714-572-1528 Jubail Industrial City 31961, Saudi Arabia
Fax: 714-572-1463 Phone: +966-3-341-0278
Fax: +966-3-341-7624
Specification Data CN3002 5/03
Copyright 2003 Dresser, Inc. All rights reserved. Model 30000
LaVigne Inc. Job#22121, 5/03 5M