SCHEDULE OF RATES FOR THE YEAR 2020-21

FOR MEERUT MANDAL W.E.F. 02.06.2020

(FOR CONSTRUCTION WORKS)
SANCTIONED BY S.E. 18TH CIRCLE VIDE LETTER NO. 257/VIVIDH-13/30 DATED 02.06.2020

EXECUTIVE ENGINEER
IST C.D.U.P. JAL NIGAM
GHAZIABAD
 OFFICE OF THE EXECUTIVE ENGINEER, IST. C.D. U.P. JAL NIGAM, GHAZIABAD
RATES OF LABOUR & MATERIAL FOR THE YEAR 2020-21 (FOR CONSTRUCTION WORKS)
DISTT. GHAZIABAD/MEERUT/BULANDSHAHR/GAUTAM BUDDH NAGAR/BAGHPAT/HAPUR
Labour & Material rates sanctioned by S.E. 18th Circle, Gzb vide letter no. 257/vividh -13/30 dt. 02-06-2020
CODE DESCRIPTION RATE IN RS. UNIT
1 2 3 4
(A) LABOUR
101 MISTRY 580 DAY
102 MASON/STONE MASON 510 DAY
103 BELDAR/MAZDOOR/DIGGER/DRESSER 360 DAY
104 COOLIE 360 DAY
105 BLACK SMITH 390 DAY
106 BHISTI 390 DAY
107 CARPENTER 510 DAY
108 HAMMER MAN 360 DAY
109 PAINTER 480 DAY
110 WHITE WASHER 390 DAY
111 MECHANIC 425 DAY
112 HELPER 360 DAY
113 WATCHMAN 360 DAY
114 FITTER/PLUMBER 460 DAY
115 JUNIOR FITTER 390 DAY
116 SPECIAL LABOUR FOR ROCK CUTTING 360 DAY
117 CHISELLERS 360 DAY
118 SPECIAL MAZDOOR/COOLIE (FOR RUBBING & POLISHING) 360 DAY
119 MATE 460 DAY
120 PESHRAJ 580 DAY
121 TILE LAYER 580 DAY
122 THATCHER 360 DAY
123 MASON (JUNIOR) 390 DAY
124 WOMEN COOLIE 360 DAY
125 CHOWKIDAR 360 DAY
126 WORK AGENT 460 DAY
127 DRIVER FOR CONCRETE MIXER 460 DAY
128 CLEANER 350 DAY
129 BOILERMAN 360 DAY
130 WELL SINKER 425 DAY
131 WORK MISTRY 580 DAY
132 TAR BOILER MAN/FIREMAN 360 DAY
133 STONE DRESSER 510 DAY
134 BORER (BORING MECHANIC) 350 DAY
135 BHAINSA-BUGGI WITH DRIVER 940 DAY
136 DRIVER 460 DAY
137 ASSISTANT BORER 340 DAY
138 150 mm G.I. bolt 210 10 Nos.
139 Road roller 5060 DAY
140 Scrap value of angle iron and M.S. sheet 1660 qtl
 (B) MATERIAL:
235 BRICKS IST.CLASS (M-150) 5600 1000 NOS.
236 BRICKS TILES IST.CLASS 5650 1000 NOS.
237 BRICKS IIND. CLASS 4600 1000 NOS.
238 BRICKS TILES IIND. CLASS 4650 1000 NOS.
239 BRICKS IIIRD. CLASS 3450 1000 NOS.
240 BRICKS OVER BURNT 4300 1000 NOS.
241 BRICK SUN DRIED 4800 1000 NOS.
242 BRICK IST. CLASS SPECIAL MOULDED 5850 1000 NOS.
243 DIF. IN RATES OF IST. CLASS & SPECIALLY MOULDED BRICKS 250 1000 NOS.
244 BRICK BALLAST 40 MM GAUGE 1050 CUM
245 STONE BALLAST 40 MM GAUGE 2300 CUM
246 STONE BALLAST 20 MM GAUGE 2500 CUM
247 STONE GRIT 10-12 MM 2550 CUM
248 PEBBLES OR FINE GRAVEL 1720 CUM
249 COARSE SAND ( BADARPUR ) 2550 CUM
250 LOCAL SAND 450 CUM
251 CEMENT 385 BAG
252 WHITE CEMENT 1310 BAG
253 WHITE LIME (SLAKED) 18630 CUM
254 WHITE LIME (UNSLAKED) 1000 QTL
255 KANKAR LIME 18200 CUM
256 SURKHI 1060 CUM
257 SHINGLE 1750 CUM
258 EARTH 440 CUM
259 STONE 50 MM THICK 1800 SQM
260 STONE 40 MM THICK 1490 SQM
261 MARBLE DUST 5880 CUM
262 MARBLE CHIPS 5010 CUM
263 WHITE MARBLE 20 KG BAG 69 BAG
264 FLAT TILES 1030 100 NOS.
265 HALF ROUND TILES 1420 100 NOS.
266 FLAT RIDGE 1410 100 NOS.
267 LARGE COUNTRY TILES 1360 100 NOS.
268 SEGMENTAL TILES 1360 100 NOS.
269 SMALL SIZE COUNTRY TILES 1030 100 NOS.
270 SMALL SIZESEGMENTAL TILES 1520 100 NOS.
271 TILES 15 x 15 CM GLAZED 19 NOS.
272 STONE SLAB STANDARD 40 MM THICK 960 SQM
273 STONE SLAB NON STANDARD 40 MM THICK 760 SQM
274 SPUN YARN 190 KG
275 PIG LEAD 220 KG
276 FUEL WOOD 820 QTL
277 GUR 42 KG
278 WATER PROOFING COMPOUND 135 KG
279 STEEL 49 KG
280 COAL TARRING 105 SQM
281 LINSEED OIL 270 LTR.
282 COLOUR 140 KG
283 PRIMER 230 LTR.
284 VARNISH 210 LTR.
285 PAINT ENAMEL HIGH GRADE 280 LTR.
286 WHITING 10 KG
287 DISTEMPER OIL 114 KG
288 COAL TAR 100 LTR.
289 SOLIGNUM 250 LTR.
290 CASTIC SODA 85 KG
291 WAX POLISH 375 KG
292 ENAMEL SYNTHETIC SUPERIOR QUALITY 280 LTR.
293 COLOURING MATERIAL 140 KG
294 DRY DISTEMPER 150 KG
295 MUSTARD OIL 170 LTR.
296 COTTON CHORD 125 KG
297 SAL BALLIES(EUKLIPTIS) 100 MM 200 RM
298 SAL BALLIES(EUKLIPTIS) 125 MM 210 RM
299 SAL BALLIES(EUKLIPTIS) 150 MM 220 RM
300 SAL WOOD WALLERS 52000 CUM
301 TEAK WOOD (C.P.) 75600 CUM
302 SHISHAM WOOD 72000 CUM
303 SAL WOOD 51500 CUM
304 DEODAR WOOD 51550 CUM
305 KAIL WOOD 27600 CUM
306 COUNTRY WOOD 26200 CUM
307 CHIR WOOD 31750 CUM
308 PLY WOOD 9 MM 960 SQM
309 PLANKS (COUNTRY WOOD) 38200 CUM
310 C.P.TEAK WOOD CLEAT 60 NOS.
311 TEAK WOOD BLOCK 75X75X120 MM 190 NOS.
312 TEAK WOOD PLATE 100X100X10 MM 90 NOS.
313 C.P. TEAK WOOD PEG RACK 105 NOS.
314 BAMBOOS 25 MM DIA 75 NOS.
315 CHATAI 145 SQM
316 BAN 90 NOS.
317 BASKETS 185 NOS.
318 EMPTY BAGS 6 NOS.
319 M.S.SHEETS 7400 QTL
320 ANGLE IRON 5000 QTL
321 SHEET IRON 1 MM THICK 120 KG
322 G.C.SHEET 0.63 MM 8560 QTL
323 G.I.PLAIN SHEET 2.50X1.00 MM 7960 QTL
324 MASONITE OR CALOTAX 6 MM THICK 360 SQM
325 EXPANDED METAL 295 SQM
326 M.S.BARS 16 MM DIA 4900 QTL
327 M.S. CLAMP 100 mm 110 NOS.
328 NAILS 120 KG
329 IRON CLEAT 75 NOS.
330 SCREW 30/40 MM 190 100 NOS.
331 IRON SCREW 25X 6 MM 920 100 NOS.
332 G.I.BOLT 25X 6 MM 95 10 NOS
333 G.I. BOLT 15X 6 MM 90 10 NOS
334 NUT WITH BOLT 16X65 MM 110 KG
335 NUT WITH BOLT 20X65 MM 110 KG
336 NUT WITH BOLT 20X75 MM 110 KG
337 NUT WITH BOLT 20X90 MM 110 KG
338 NUT WITH BOLT 24X90 MM 110 KG
339 NUT WITH BOLT 27X100 MM 110 KG
340 NUT WITH BOLT 27X110 MM 110 KG
341 NUT WITH BOLT 30X110 MM 110 KG
342 NUT WITH BOLT 33X120 MM 110 KG
343 G.I.WIRE GAUGE 2.5.2,1.50 MM MESH 310 SQM
344 BRASS CLEAT 100 NOS.
345 BRASS SCREW 320 100 NOS.
346 BRASS HINGE 50 MM 215 NOS.
347 BRASS HAT PEG 140 NOS.
348 C.I.FOOT STEPS 270 NOS.
349 GLASS PANES 24X36 CM(2.5 MM TH.) 55 NOS.
350 GLASS PANES 18X36 CM(2.5 MM TH.) 55 NOS.
351 GLASS PANE 2.50 MM TH. 430 SQM
352 C.I.DOWN PIPE 100 MM DIA 2 M LONG 810 RM
353 A.C.DOWN PIPE 100 MM DIA 2 M LONG 90 RM
354 LUMPET WASHER 7.5 10 NOS
355 BITUMEN WASHER 6.5 10 NOS
356 A.C. SHEET 6 MM TH. 320 SQM
357 STEAM COAL 1290 QTL
358 3 MM TH. RUBBER INSERTION 195 KG
359 ROSE BOWL 200 NOS.
360 HEAD 200 NOS.
361 SHOE SPLASH PROOF 110 NOS.
362 BEND WITH EYE HOLE 105 NOS.
363 HIRING OF ROAD ROLLER 5060 DAY
364 DIFF. IN RATES OF IST. CLASS & IIND. CLASS BRICK 1000 1000 NOS.
365 DIFF IN RATES OF SHINGLE & STONE GRIT -750 CUM
366 DIFF. IN RATES OF IST. CLASS & IIIRD. CLASS BRICK 2150 1000 NOS.
367 CARTAGE OF C.I. PIPE 80-300 MM DIA 50.69 QTL
368 CARTAGE OF C.I. PIPE 350-750 MM DIA 54.40 QTL
369 CARTAGE OF C.I. PIPE 800-1000 MM DIA 80.05 QTL
370 CARTAGE OF C.I. PIPE 1100-1200 MM DIA 82.97 QTL
371 CARTAGE OF A.C.I & II CLASS PIPE 50-300 MM DIA 50.78 QTL
372 CARTAGE OF A.C.I & II CLASS PIPE 350-600 MM DIA 76.37 QTL
373 CARTAGE OF M.S.SCREWED / SOCKETED PIPE 15-150 MM DIA 48.63 QTL
374 CARTAGE OF STONEWARE GLAZED PIPE 40-400 MM DIA 57.57 QTL
375 CARTAGE OF R.C.C.P1 QUALITY PIPE 80-300 MM DIA 51.11 QTL
376 CARTAGE OF R.C.C.P2 QUALITY PIPE 80-300 MM DIA 50.03 QTL
377 CARTAGE OF R.C.C.P2 QUALITY PIPE 350-600 MM DIA 68.44 QTL
378 CARTAGE OF R.C.C.P3 QUALITY PIPE 200-300 MM DIA 50.03 QTL
379 CARTAGE OF R.C.C.P3 QUALITY PIPE 350-700 MM DIA 63.64 QTL
380 CARTAGE OF R.C.C.P3 QUALITY PIPE 900-1200 MM DIA 68.30 QTL
381 CARTAGE OF R.C.C.NP2 QUALITY PIPE 100-300 MM DIA 50.42 QTL
382 CARTAGE OF R.C.C.NP2 QUALITY PIPE 350-700 MM DIA 88.26 QTL
383 CARTAGE OF R.C.C.NP2 QUALITY PIPE 800-1800 MM DIA 165.09 QTL
384 CARTAGE OF R.C.C.NP2 QUALITY PIPE 350-700 MM DIA 88.26 QTL
385 CARTAGE OF R.C.C.NP2 QUALITY PIPE 800-1200 MM DIA 165.09 QTL
386 BITUMEN 55000 TON
387 BRICK BALLAST 25 MM GAUGE 1000 CUM
388 100 MM DIA A.C. BEND 105 NOS.
389 HOLDER FOR A.C. DOWN PIPE 100 MM DIA 88 NOS.
390 BLEACHING POWER 35 KG
391 C.C. TILE 80 MM TH.(M-30) 540 SQM
392 M.S. CLAMP 80 MM 90 NOS.
393 M.S. CLAMP 150 MM 135 NOS.
394 BRICK BALLAST 25 MM GAUGE 1100 cum
395 APEX PAINT(MED. QUALITY) 350 LTR.
396 FIRST CLASS BRICKS (M-100) 4600 1000 NOS.
397 M.S. GIRDER 5300 QTL
398 P.V.C. PIPE 6 KG/CM2 99.5 M
2
399 P.V.C. BEND 8 KG/CM 110 NOS.
400 P.V.C. SOCKET 8KG/CM2 25 NOS.
400 ENAMEL SYNTHETIC MEDIUM QUALITY 260 LTR.
 OFFICE OF THE EXECUTIVE ENGINEER, IST. C.D. U.P. JAL NIGAM, GHAZIABAD
SCHEDULE OF RATES FOR THE YEAR 2020-21 (FOR CONSTRUCTION WORKS)
DISTT. GHAZIABAD/MEERUT/BULANDSHAHR/GAUTAM BUDDH NAGAR/BAGHPAT/HAPUR
S O R INCL. OF ALL TAXES VIDE C E (R), LUCKNOW LETTER NO.1195/2042-0024 STA/18 DATED 03.08.2018
Labour & Material rates sanctioned by S.E. 18th Circle, Gzb vide letter no. 257/vividh -13/30 dt. 02-06-2020
CODE DESCRIPTION RATE IN RS. UNIT
1 2 3 4
( A ) BUILDING WORK :-
1. EARTH WORK:-
1001 EXCAVATION 0-1.50 M DEEP IN ORDINARY SOIL 197.12 CUM
1002 EXCAVATION 0-1.50 M DEEP IN SOIL MIXED WITH MOORUM, SINGLE AND KANKAR 230.34 CUM
1003 BANKING WITH EXCAVATED EARTH 70.02 CUM
1004 SAND FILLING IN PLINTH 692.16 CUM
1005 FILLING, DRESSING AND RAMMING EARTH OR SAND OR BAJRI OR BALLAST OR
KANKAR OR SHINGLE 129.38 CUM
1006 EXTRA OVER ITEM NO. 1001 TO 1005 FOR ADDITIONAL LEAD & LIFT 33.60 CUM
2. CONCRETE WORK:-
1007 CONCRETE WITH 40 MM BRICK BALLAST, WHITE LIME & SAND MORTAR (1:2) IN
FOUNDATION AND FLOORS 6176.11 CUM
1008 CONCRETE WITH 40 MM BRICK BALLAST, WHITE LIME & SURKHI IN FOUNDATION
AND FLOORS (100:16:32) 6403.82 CUM
1009 CONCRETE WITH 40 MM BRICK BALLAST, LOCAL SAND & CEMENT IN
FOUNDATION AND FLOORS (12:6:1) 3879.53 CUM
1010 SAME AS ITEM NO.1009 BUT FOR 10:5:1 4097.51 CUM
1011 SAME AS ITEM NO.1009 BUT FOR 8:4:1 4425.67 CUM
1012 CONCRETE WITH 40 MM BRICK BALLAST, WHITE LIME & SAND MORTAR (1:2) IN
HAUNCH FILLING 6993.05 CUM
1013 CONCRETE WITH 40 MM BRICK BALLAST, KANKAR LIME IN ROOF TERRACING 12573.78 CUM
1014 CONCRETE WITH 40 MM BRICK BALLAST, WHITE LIME & SURKHI IN ROOF
TERRACING (100:16:32) 7771.66 CUM
1015(A) CEMENT CONCRETE WITH 40 MM STONE BALLAST, COARSE SAND AND CEMENT
4:2:1 9027.67 CUM
1015(B) CEMENT CONCRETE WITH 20 MM STONE BALLAST, COARSE SAND AND CEMENT
4:2:1 9251.65 CUM
1015(C) CEMENT CONCRETE WITH 20 MM STONE BALLAST, COARSE SAND AND CEMENT
3:1.50:1 10269.66 CUM
1016 SAME AS ITEM NO.1015 BUT FOR 6:3:1 7989.50 CUM
1017 SAME AS ITEM NO.1015 BUT FOR 8:4:1 7645.76 CUM
1018 R.C.C. DOOR SILLS, CHAUKHATS ETC. WITH CEMENT, COARSE SAND AND 20 MM
STONE BALLAST 1:2:4 10813.61 CUM
1019 R.C.C. WITH CEMENT, COARSE SAND AND 20 MM STONE BALLAST 1:2:4 IN LINTEL
OF DOORS AND WINDOWS 10911.67 CUM
1020 SAME AS ITEM NO. 1019 BUT FOR SLAVES 12002.84 CUM
1021 SAME AS ITEM NO. 1019 BUT FOR LIGHTER BEAMS 13032.21 CUM
1022 SAME AS ITEM NO. 1019 BUT FOR HEAVIER BEAMS 14092.47 CUM
1023 R.C.C. WITH CEMENT, COARSE SAND AND 40 MM STONE BALLAST 1:2:4 IN RAFT
FOUNDATION & FOOTING 10231.27 CUM
1024 R.C.C. WITH CEMENT, COARSE SAND AND 20 MM STONE BALLAST 1:2:4 IN BEAMS,
SLAVES AND FOUNDATION & FOOTING 13032.21 CUM
1025 SAME AS ITEM NO. 1024 BUT IN R.C.C. COLUMN IN 1:1.5:3 13662.46 CUM
1026 SAME AS ITEM NO. 1018 TO 1024 BUT WITH SHINGLES (DEDUCT FROM ITEM NO
1018 TO 1024) -380.82 CUM
3. BRICK WORK:-
1027
IST. CLASS BRICK WORK (M-150) IN KANKAR LIME IN FOUNDATION AND PLINTH
11686.20 CUM
1028 IST. CLASS BRICK WORK (M-150) IN WHITE LIME AND SURKHI 1:2 IN FOUNDATION
AND PLINTH 8001.47 CUM
1029 IST. CLASS BRICK WORK (M-150) IN 1:6 CEMENT AND LOCAL SAND MORTAR IN
FOUNDATION AND PLINTH 5678.47 CUM
1030 SAME AS ITEM 1029 BUT IN 1:5 CEMENT AND LOCAL SAND MORTAR IN PLINTH
AND FOUNDATION 5739.13 CUM
1031 SAME AS ITEM 1029 BUT IN 1:4 CEMENT AND LOCAL SAND MORTAR IN PLINTH
AND FOUNDATION 5877.25 CUM
1032 SAME AS ITEM 1029 BUT IN 1:3 CEMENT AND LOCAL SAND MORTAR IN PLINTH
AND FOUNDATION 6084.43 CUM
1033 SAME AS ITEM 1029 BUT IN 1:3 CEMENT AND COARSE SAND MORTAR IN PLINTH
AND FOUNDATION 6650.81 CUM
1034(A)
IST. CLASS BRICK WORK (M-100) IN MUD MORTAR IN FOUNDATION AND PLINTH
4433.59 CUM
1034(B)
IST. CLASS BRICK WORK (M-100) DRY SOLING IN FOUNDATION AND PLINTH
3550.44 CUM
1035 SAME AS ITEM NO. 1027 TO 1034 BUT IN SUPER STRUCTURE 1.5 BRICK TH. WALL (
EXTRA ON ITEM 1027 TO 1034) 381.99 CUM
1036 SAME AS ITEM NO. 1027 TO 1034 BUT IN SUPER STRUCTURE 1 BRICK TH. WALL (
EXTRA ON ITEM 1027 TO 1034) 381.99 CUM
1037 SAME AS ITEM NO. 1027 TO 1034 BUT IN SUPER STRUCTURE 1/2 BRICK TH. WALL (
EXTRA ON ITEM 1027 TO 1034) 381.99 CUM
1038 FOR II CLASS BRICK WORK ( DEDUCT FROM ITEMS 1027 TO 1036) 622.16 CUM
1039 FOR III CLASS BRICK WORK ( DEDUCT FROM ITEMS 1034 TO 1036) 1337.64 CUM
1040 SUN DRIED BRICK WORK IN MUD MORTAR IN FOUNDATION AND PLINTH 4350.85 CUM
1041 IST. CLASS BRICK WORK IN ARCHES ( EXTRA ON ITEM 1027 TO 1036) 918.53 CUM
1042
SAME AS ITEM NO. 1041 BUT INJACK- ARCHES ( EXTRA ON ITEM 1027 TO 1033)
1008.23 CUM
1043 SAME AS ITEM NO. 1041 BUT IN WELL STEINING WITH ORDINARY BRICKS ( EXTRA
ON ITEM 1027 TO 1033) 1202.29 CUM
1044 SAME AS ITEM NO. 1043 BUT WITH SPECIALLY MOULDED BRICKS ( EXTRA ON ITEM
1043) 596.03 CUM
1045 11.5 CM STRING OR DRIP COURSE OF I CLASS BRICK IN KANKAR LIME 785.27 RM
1046 SAME AS ITEM NO. 1045 BUT 1:6 CEMENT AND LOCAL SAND MORTAR 395.87 RM
1047 SAME AS ITEM NO. 1045 BUT 23 CM CORNICE IN KANKAR LIME WITH LIME
PLASTER 626.92 RM
1048 SAME AS ITEM NO. 1047 BUT 1:6 CEMENT AND LOCAL SAND MORTAR WITH 1:6
PLASTERING 316.29 RM
1049 EXTRA FOR CUTTING FOR BRICK MOULDING 129.41 RM
1050 MAKING OPENING THROUGH WALLS IN LIME OR CEMENT MORTAR 2703.75 CUM
1051 R.B.WORK IN SUNSHADE IN I CLASS BRICK IN 1:3 CEMENT AND COARSE SAND
MORTAR 9992.73 CUM
1052 SAME AS ITEM NO. 1051 BUT IN LINTEL 9084.30 CUM
1053 ENCASING ROLLED STEEL SECTIONS IN 1:3 BRICK WORK IN CEMENT AND COARSE
SAND 1683.94 RM

4. DAMP PROOF COURSE WORK:-

1054 20 MM TH. D.P.C. IN 1:2 CEMENT AND COURSE SAND MORTAR 362.33 SQM
1055 SAME AS ITEM NO. 1054 BUT 25 MM TH.WITH CEMENT, COARSE SAND AND
STONE GRIT 12 MM IN 1:1.5:3 446.58 SQM
5. STONE WORK WORK:-
1056 SUPPLY AND FIX FINE DRESSED STONE IN DOOR SILLS IN CEMENT AND LOCAL SAND
IN 1:6 74860.40 CUM
1057 SUPPLY AND FIX 40 MM TH. STONE SLAB IN STEPS AND SELVES CEMENT AND
LOCAL SAND IN 1:6 2758.17 SQM
1058 SUPPLY AND FIX 40 MM TH. STONE CHAJJAS WITH CEMENT AND LOCAL SAND IN
1:6 2754.35 SQM
1059 SUPPLY AND FIX 40 MM TH. STONE SUNSHADE OVER DOORS AND WINDOWS
WITH CEMENT AND LOCAL SAND IN 1:6 2533.27 SQM
1060 SUPPLY AND FIX 50 MM TO 60 MM TH. STONE WITH CEMENT AND LOCAL SAND
IN 1:3 8661.06 CUM

6. WOODEN WORK:-
1061 C.P. TEAK WOOD WROUGHT, FRAMED & FIXED IN CHAUKHATS 122439.79 CUM
1062 SAME AS ITEM 1061 BUT WITH SHISHAM WOOD 117556.83 CUM
1063 SAME AS ITEM 1061 BUT WITH SAL WOOD 89787.19 CUM
1064 SAME AS ITEM 1061 BUT WITH DEODAR WOOD 89854.92 CUM
1065 SAME AS ITEM 1061 BUT WITH KAIL WOOD 57411.86 CUM
1066 SAME AS ITEM 1061 BUT WITHCOUNTARY WOOD 55515.39 CUM
1067
SAME AS ITEM 1061 TO 1066 BUT FOR CURVED WORK (EXTRA ON 1061 TO 1066)
25 % EXTRA CUM
1068 WOOD WROUGHT, FRAMED & FIXED IN ROOF TRUSSES, PURLINS, CEILINGS,
JOINTS ( DEDUCT FROM 1061 TO 1066) 317.30 CUM
1069 SUPPLY & FIX 40 MM TH. C.P. TEAK WOOD PART PANELLED &PARTLY GLAZED IN
DOOR AND WINDOW SHUTTERS 4982.39 SQM
1070
ADDITIONAL COST FOR FIXING GLASS PANES WITH C.P.TEAK WOOD 620.83 SQM
1071
SAME AS ITEM 1069 BUT FOR C.P. TEAK WOOD FULLY PANELLED(40 MM TH.) 6018.58 SQM
1072 SAME AS ITEM 1069 BUT FOR C.P. TEAK WOOD FULLY GLAZED (40 MM TH.) 4481.79 SQM
1073 SAME AS ITEM NO 1069 BUT FOR C.P. TEAK WOOD 35 MM THICK 4551.86 SQM
1074 SAME AS ITEM NO 1071 BUT FOR C.P. TEAK WOOD 35 MM THICK 5583.47 SQM
1075 SAME AS ITEM NO 1072 BUT FOR C.P. TEAK WOOD 35 MM THICK 4230.94 SQM
1076 SAME AS ITEM NO 1069 BUT FOR C.P. TEAK WOOD 35 MM THICK 3835.20 SQM
1077 SAME AS ITEM NO 1071 BUT FOR C.P. TEAK WOOD 35 MM THICK 4408.67 SQM
1078 SAME AS ITEM NO 1072 BUT FOR C.P. TEAK WOOD 35 MM THICK 3666.51 SQM
1079 SAME AS ITEM NO 1069 BUT FOR SHISHAM WOOD 40 MM THICK 4837.35 SQM
1080 SAME AS ITEM NO 1071 BUT FOR SHISHAM WOOD 40 MM THICK 5811.38 SQM
1081 SAME AS ITEM NO 1072 BUT FOR SHISHAM WOOD 40 MM THICK 4377.27 SQM
1082 SAME AS ITEM NO 1079 BUT FOR SHISHAM WOOD 35 MM THICK 4427.54 SQM
1083 SAME AS ITEM NO 1080 BUT FOR SHISHAM WOOD 35 MM THICK 5396.99 SQM
1084 SAME AS ITEM NO 1081 BUT FOR SHISHAM WOOD 35 MM THICK 4138.36 SQM
1085 SAME AS ITEM NO 1069 BUT FOR SAL WOOD 40 MM THICK 4011.45 SQM
1086 SAME AS ITEM NO 1071 BUT FOR SAL WOOD 40 MM THICK 4631.52 SQM
1087 SAME AS ITEM NO 1072 BUT FOR SAL WOOD 40 MM THICK 3782.07 SQM
1088 SAME AS ITEM NO 1085 BUT FOR SAL WOOD 35 MM THICK 3719.62 SQM
1089 SAME AS ITEM NO 1076 BUT FOR SAL WOOD 35 MM THICK 4335.12 SQM
1090 SAME AS ITEM NO 1087 BUT FOR SAL WOOD 35 MM THICK 3611.18 SQM
1091 SAME AS ITEM NO 1069 BUT FOR DEODAR WOOD 40 MM THICK 4013.47 SQM
1092 SAME AS ITEM NO 1071 BUT FOR DEODAR WOOD 40 MM THICK 4634.40 SQM
1093 SAME AS ITEM NO 1072 BUT FOR DEODAR WOOD 40 MM THICK 3783.52 SQM
1094 SAME AS ITEM NO 1091 BUT FOR DEODAR WOOD 35 MM THICK 3721.35 SQM
1095 SAME AS ITEM NO 1092 BUT FOR DEODAR WOOD 35 MM THICK 4337.71 SQM
1096 SAME AS ITEM NO 1093 BUT FOR DEODAR WOOD 35 MM THICK 3612.47 SQM
1097 SAME AS ITEM NO 1091 BUT FOR DEODAR WOOD 25 MM THICK 3226.17 SQM
1098 SAME AS ITEM NO 1092 BUT FOR DEODAR WOOD 25 MM THICK 3536.64 SQM
1099 SAME AS ITEM NO 1093 BUT FOR DEODAR WOOD 25 MM THICK 3227.60 SQM
1100 SAME AS ITEM NO 1069 BUT FOR CHIR WOOD 40 MM THICK 3215.77 SQM
1101 SAME AS ITEM NO 1071 BUT FOR CHIR WOOD 40 MM THICK 3494.83 SQM
1102 SAME AS ITEM NO 1072 BUT FOR CHIR WOOD 40 MM THICK 3208.64 SQM
1103 SAME AS ITEM NO 1100 BUT FOR CHIR WOOD 35 MM THICK 3037.61 SQM
1104 SAME AS ITEM NO 1101 BUT FOR CHIR WOOD 35 MM THICK 3312.10 SQM
1105 SAME AS ITEM NO 1102 BUT FOR CHIR WOOD 35 MM THICK 3103.29 SQM
1106 SAME AS ITEM NO 1100 BUT FOR CHIR WOOD 25 MM THICK 2901.42 SQM
1107 SAME AS ITEM NO 1101 BUT FOR CHIR WOOD 25 MM THICK 2818.71 SQM
1108 SAME AS ITEM NO 1102 BUT FOR CHIR WOOD 25 MM THICK 2866.25 SQM
1109 SAME AS ITEM NO 1069 BUT FOR KAIL WOOD 40 MM THICK 4011.45 SQM
1110 SAME AS ITEM NO 1071 BUT FOR KAIL WOOD 40 MM THICK 3255.98 SQM
1111 SAME AS ITEM NO 1072 BUT FOR KAIL WOOD 40 MM THICK 3088.15 SQM
1112 SAME AS ITEM NO 1109 BUT FOR KAIL WOOD 35 MM THICK 2894.30 SQM
1113 SAME AS ITEM NO 1110 BUT FOR KAIL WOOD 35 MM THICK 3097.13 SQM
1114 SAME AS ITEM NO 1111 BUT FOR KAIL WOOD 35 MM THICK 2996.57 SQM
1115 SAME AS ITEM NO 1109 BUT FOR KAIL WOOD 25 MM THICK 2619.66 SQM
1116 SAME AS ITEM NO 1110 BUT FOR KAIL WOOD 25 MM THICK 2668.24 SQM
1117 SAME AS ITEM NO 1111 BUT FOR KAIL WOOD 25 MM THICK 2790.51 SQM
1118 SUPPLY OF 1MM TH. SHEET IRON PANELLED DOOR AND WINDOW SHUTTERS IN 40
MM TH. SAL WOOD FRAME 3853.59 SQM
1119 SUPPLY & FIXING 40 MM TH. TEAK WOOD DOOR AND WINDOW SHUTTERS IN 40
MM TH. SAL WOOD FRAME 4252.39 SQM
1120 SAME AS ITEM NO. 1119 BUT IN SHEESHAM WOOD 40 MM TH. 4121.85 SQM
1121 SAME AS ITEM NO. 1119 BUT IN SHEESHAM WOOD 40 MM TH. 3378.54 SQM
1122 SAME AS ITEM NO. 1119 BUT IN SHEESHAM WOOD 40 MM TH. 3380.35 SQM
1123 SAME AS ITEM NO. 1119 BUT IN SHEESHAM WOOD 40 MM TH. 2662.42 SQM
1124 SAME AS ITEM NO. 1119 BUT IN SHEESHAM WOOD 40 MM TH. 2511.95 SQM
1125 SUPPLY OF G.I.WIRE OVER WINDOWS AND C.P. TEAK WOOD BATTENS 50 MM X 12
MM 1054.39 SQM
1126
SAME AS ITEM NO. 1125 BUT WITH SHEESHAM WOOD BATTENS 50 MM X 12 MM
1041.25 SQM
1127
SAME AS ITEM NO. 1125 BUT WITH DEODAR WOOD BATTENS 50 MM X 12 MM
966.61 SQM
1128 SAME AS ITEM NO. 1125 BUT WITH SAL WOOD BATTENS 50 MM X 12 MM 966.42 SQM
1129 SAME AS ITEM NO. 1069 BUT BRACED AND BATTENED 40 MM TH. SHEESHAM
WOOD DOORS AND WINDOWS 7739.54 SQM
1130 SAME AS ITEM NO. 1129 BUT IN SAL WOOD 40 MM THICK 5961.67 SQM
1131 SAME AS ITEM NO. 1129 BUT IN COUNTARY WOOD 40 MM THICK 3767.52 SQM
1132 SAME AS ITEM NO. 1129 BUT IN DEODAR WOOD 40 MM THICK 5966.00 SQM
1133 SAME AS ITEM NO. 1129 BUT IN KAIL WOOD 40 MM THICK 3888.93 SQM
1134 SAME AS ITEM NO. 1129 BUT IN CHIR WOOD 40 MM THICK 4248.84 SQM
1135 SUPPLY OF 40 MM TH. C.P. TEAK WOOD DOOR AND WINDOW SHUTTERS WITH 9
MM TH. PLYWOOD OR PRESSED WOOD PANELS AND FIXING C.P.TEAK WOOD
CLEATS , STOPS, HINGES, LOCKS, BOLTS , HANDLES, SPRINGS AND OTHER
FITTINGS(EXCLUDING SUPPLY OF FITTINGS) 4277.75 SQM
1136 SAME AS ITEM NO. 1135 BUT IN DEODAR WOOD 40 MM TH. 3405.72 SQM
1137 SAME AS ITEM NO. 1135 BUT IN SHEESHAM WOOD 40 MM TH. 4147.22 SQM
1138 SAME AS ITEM NO. 1135 BUT IN SAL WOOD 40 MM TH. 3403.91 SQM
1139 SAME AS ITEM NO. 1135 BUT IN KAIL WOOD 40 MM TH. 2537.32 SQM
 1140 SAME AS ITEM NO. 1135 BUT IN CHIR WOOD 40 MM TH. 2687.79 SQM
1141 SAME AS ITEM NO. 1135 BUT IN COUNTARY WOOD 40 MM TH. 2486.55 SQM
1142 APPROXIMATE COST OF IRON FITTINGS FOR DOORS AND WINDOWS LS SQM
1143
APPROXIMATE COST OF OXIDISED FITTINGS FOR DOORS AND WINDOWS
LS SQM
1144 APPROXIMATE COST OF BRASS FITTINGS FOR DOORS AND WINDOWS LS SQM
1145 APPROXIMATE COST OF OXIDISED BRASS FITTINGS FOR DOORS AND WINDOWS LS SQM
7. MILD STEEL WORK:
1146
ROLLED STEEL JOISTS LIGHT SECTION 0 - 7.5 M HIGH (EXCLUDING COST OF JOIST) 1549.91 QTL
1147
ROLLED STEEL JOISTS HEAVY SECTION 0 - 7.5 M HIGH (EXCLUDING COST OF JOIST) 3071.29 QTL
1148 EXTRA ON ITEM NO. 1146 & 1147 FOR MORE THAN 7.50 M HEIGHT 955.64 QTL
1149 MILD STEEL OR IRON WORK OF SMALL SIZE SECTIONS 9219.17 QTL
1150 MILD STEEL OR IRON WORK OF HEAVY SIZE SECTIONS 10324.12 QTL
1151 MILD STEEL OR IRON WORK IN PLAIN WORK 8316.06 QTL
1152 CUTTING ROLLED STEEL JOIST UP TO 225 MM X 100 MM 266.64 CUT
1153 CUTTING ROLLED STEEL JOIST ABOVE 225 MM X 100 MM 533.28 CUT
1154 CUTING OF PLATES & ANGLES UPTO 20 MM TH. 116.66 SQM
1155 CUTING OF ROUNDS UPTO 15 MM DIA. 6.63 CUT
1156
BORING HOLES IN MILD STEEL OR IRON UPTO 10 MM DIA & UPTO 6 MM TH. PLATE
36.25 HOLE
1157 SAME AS ITEM 1156 BUT HOLES 10 - 20 MM DIA & 6 - 13 MM TH. PLATE 43.50 HOLE
1158 PROVIDE AND FIX 100 MM DIA C.I. DOWN PIPE 1275.65 RM
1159 FIX BARBED IRON WIRE FENCING TO POST 66.05 RM
8. ROOF WORK:-
1160 SUPPLY AND FIX SINGLE ALLAHABAD TILES FOR ROOF WORK. 1037.65 SQM
1161
SAME AS ITEM 1160 BUT FOR DOUBLE ALLAHABAD TILES FOR ROOF WORK.
1660.23 SQM
1162
SUPPLY AND FIX LARGE COUNTRY TILES ROOFING ON BAMBOO FRAMES
1606.91 SQM
1163 SAME AS ITEM 1162 BUT SMALL SIZE COUNTRY TILES 2787.28 SQM
1164 LAYING OF R.B. SLAB WITH IST. CLASS BRICKS LAID IN CEMENT MORTAR WITH
APPROVED COARSE SAND(1:3) 11921.86 CUM
1165 SUPPLY AND FIX G.C. IRON ROOFING 0.63 MM TH. 1046.01 SQM
1166 SUPPLY AND FIX 0.63 MM TH. RIDGES, VALLEY AND GUTTERS FOR G.C. IRON
ROOFING 1154.82 SQM
1167 SUPPLY & LAY 40 MM TH. INSULATION LAYER OF SAND & CLAY OVER ROOF. 53.61 SQM
9. CEILING WORK:-
1168 SUPPLY & LAY 25 MM TH. DEODAR WOOD PLANK CEILING. 2737.10 SQM
1169 SAME AS ITEM 1168 BUT FOR C.P. TEAK WOOD 3864.31 SQM
1170 SAME AS ITEM 1168 BUT FOR KAIL WOOD 1614.58 SQM
1171 SUPPLY & FIX 6 MM TH. A.C. PLAIN SHEETS CEILING WITH 25 MM X 40 MM
DEODAR WOOD BEADINGS. 760.90 SQM
1172 SAME AS ITEM 1171 BUT WITH C.P. TEAK WOOD BEADING 820.75 SQM
1173
SAME AS ITEM 1171 BUT OF MASONITR OR CELOTAX WITH DEODAR BEADING
810.67 SQM
1174 SAME AS ITEM 1171 BUT WITH C.P.TEAK WOOD BEADING 870.53 SQM
10. PLASTERING AND POINTING WORK:-
1175 STRUCK POINTING WITH KANKAR LIME ON BRICK WORK. 328.18 SQM
1176 SAME AS ITEM 1175 BUT FOR FLUSH POINTING. 265.57 SQM
1177 RUBBING WITH KANKAR LIME OR WITH WHITE LIME & SURKHI ON BRICK-WORK 279.46 SQM
1178 SAME AS ITEM 1175 BUT CEMENT AND LOCAL SAND MORTAR (1:2) 241.74 SQM
1179 SAME AS ITEM 1178 BUT FLUSH POINTING (DEDUCT FROM ITEM 1178) 35.72 SQM
1180 SAME AS ITEM 1178 AND 1179 BUT IN FLOORS (DEDUCT FROM ITEM 1178) 43.54 SQM
1181 RAISED POINTING WITH CEMENT AND LOCAL SAND MORTAR (1:2) ON BRICK-
WORK 272.26 SQM
1182 STRUSK CEMENT POINTING WITH CEMENT AND LOCAL SAND MORTAR (1:2) ON
BRICK-WORK WITH COLOURING MATERIAL 250.25 SQM
1183 12 MM TH. PLASTER WITH KANKAR LIME OVER BRICK-WORK 504.43 SQM
1184 SAME AS ITEM 1183 BUT WITH CEMENT AND LOCAL SAND (1:2) 232.44 SQM
1185 SAME AS ITEM 1183 BUT WITH CEMENT AND COARSE SAND (1:2) 282.18 SQM
1186 SAME AS ITEM 1183 BUT WITH CEMENT AND LOCAL SAND (1:3) 208.08 SQM
1187 SAME AS ITEM 1183 BUT WITH CEMENT AND COARSE SAND (1:3) 247.28 SQM
1188 SAME AS ITEM 1183 BUT WITH CEMENT AND LOCAL SAND (1:4) 196.10 SQM
1189 SAME AS ITEM 1183 BUT WITH CEMENT AND LOCAL SAND (1:5) 191.16 SQM
1190 SAME AS ITEM 1183 BUT WITH CEMENT AND LOCAL SAND (1:6) 183.41 SQM
1191 EXTRA ON ALL ITEMS OF PLASTER IF DONE ON CEILING 28.56 SQM
1192
SAME AS ITEM 1183 BUT WITH CEMENT, WHITE LIME AND LOCAL SAND (1:1:6)
199.31 SQM
1193 MUD PLASTER OVER BRICK WALL 88.49 SQM
1194 20 MM TH. STUCCO PLASTER RESEMBLING MARBLE FINISH 1116.89 SQM
1195 20 MM TH. PLASTER ON WALLS, STEPS ETC. FINISHED WITH 5 MM TH.CEMENT &
MARBLE CHIPS (1:2) 1034.06 SQM
1196 SAME AS ITEM 1196 BUT WITH 5 MM TH. WHITE CEMENT & MARBLE CHIPS (1:2) 1209.75 SQM
1197 SAME AS ITEM 1196 BUT WITH 5 MM TH. TOP COAT COLOURED 1269.14 SQM
1198 20 MM TH. PEBBLE DASH PLASTER. 488.78 SQM
1199 ROUGH CAST FINISH TO PLASTER OF DIFFERENT MORTARS ( EXTRA TO PLASTER
ITEMS ) 101.90 SQM
1200
PLASTER OVER ROUGH FACE OF ONE BRICK WALL ( EXTRA TO PLASTER ITEMS)
34.53 SQM
1201 20 MM TH. CEMENT PLASTER IN DADO OR SKIRTING 611.74 SQM
11. FLOORING WORK:-
1202 25 MM TH. P.C.C. 1:2:4 FLOOR WITH CEMENT, COARSE SAND AND 20 MM GAUGE
STONE BALLAST WITH BASE CONCRETE(75 MM TH.)1:4:8 CEMENT, LOCAL SAND
AND BRICK BALLAST OF 40 MM GAUGE. 666.21 SQM
1203 SAME AS ITEM 1202BUT WITH BASE CONCRETE CONSISTING OF BRICK BALLAST
CEMENT, WHITE LIME AND SURKHI 100:16:32 814.57 SQM
1204 SAME AS ITEM 1202BUT WITH BASE CONCRETE CONSISTING OF BRICK BALLAST
CEMENT, WHITE LIME AND SAND MORTAR (1:2) 797.49 SQM
1205 SAME AS ITEM 1202BUT WITH 50 MM TH.1:1.5:3 P.C.C. FLOOR 1019.86 SQM
1206
SAME AS ITEM 1202BUT WITH 40 MM TH. FLOOR & WITHOUT BASE CONCRETE.
498.17 SQM
1207 EXTRA ON ITEM NO. 1202,1205 & 1206 WHEN FLOORS ARE POLISHED. 393.66 SQM
1208 EXTRA ON ITEM NO. 1202,1205 & 1206 WHENCOLOURED, POLISHED FLOORS ARE
LAID. 453.18 SQM
1209 STONE FLOORS 40 MM TH.OF MIRZAPUR OR OTHER APPROVED STONE FLAGS, SET
IN WHITE LIME & SAND. 2451.20 SQM
1210 SAME AS ITEM 1209 BUT STONE FLAGS LAID IN 1:4 CEMENT & LOCAL SAND
MORTAR 2092.26 SQM
 1211 SAME AS ITEM 1209 BUT STONE FLAGS LAID INWHITE LIME & SURKHI 1:2 & BASE

CONCRETE WITH BRICK BALLAST, WHITE LIME & SURKHI MORTAR 2355.76 SQM
1212 SAME AS ITEM 1209, 1210, 1211 BUT UPPER SURFACE & SDGES CHISEL DRESSED &
JOINT UPTO 6 MM TH. IN WHITE LIME & SAND. 2545.25 SQM
1213 SAME AS ITEM 1212 BUT IN CEMENT & SAND. 1885.58 SQM
1214 SAME AS ITEM 1212 BUT BASE CONCRETE IN WHITE LIME & SURKHI. 2249.37 SQM
1215 IST. CLASS BRICK FLOOR LAID IN CEMENT & LOCAL SAND MORTAR (1:6) & POINTED
WITH (1:2) CEMENT MORTAR OVER 75 MM TH.BASE CONCRETE WITH KANKAR
LIME. 1255.75 SQM
1216 SAME AS ITEM 1215 BUT WITH 75 MM TH.BASE CONCRETE WITH 1:2 WHITE LIME
AND SURKHI. 1375.41 SQM
1217 SAME AS ITEM 1215 BUT WITH 75 MM TH.BASE CONCRETE WITH 1:4:8 CEMENT,
LOCAL SAND & BRICK BALLAST. 1004.80 SQM
1218(A) IST. CLASS BRICK FLOOR LAID DRY, JOINTS SAND FILLED.
457.72 SQM
1218(B) IST. CLASS BRICK ON EDGE LAID DRY, JOINTS SAND FILLED.
543.58 SQM
1218(C)
IST. CLASS BRICK ON EDGE LAID DRY, JOINTS SAND FILLED( LABOUR ONLY)
153.05 SQM
1219 GRANOLYTHIC MARBLE FLOORSING 25 MM TH. WITH 20 MM TH. LAYER OF
CEMENT AND COARSE SAND & 12 MM GAUGE STONE CHIPS WITH SURFACE COAT
OF ORDINARY CEMENT INCLUDING 75 MM TH. BASE CONCRETE WITH WHITE &
SAND. 1654.93 SQM
1220 SAME AS ITEM 1219 BUT WITH WHITE CEMENT IN TOP LAYER. 1770.03 SQM
1221 SAME AS ITEM 1219 BUT WITH COLOURED FLOOR. 1718.28 SQM
1222 SAME AS ITEM 1219 BUT WITH BASE CONCRETE IN (1:4:8) CEMENT, LOCAL SAND
AND BRICK BALLAST. 1523.65 SQM
1223 SAME AS ITEM 1220 BUT WITH BASE CONCRETE IN (1:4:8) CEMENT, LOCAL SAND
AND BRICK BALLAST. 1638.75 SQM
1224 SAME AS ITEM 1221 BUT WITH BASE CONCRETE IN (1:4:8) CEMENT, LOCAL SAND
AND BRICK BALLAST. 1507.47 SQM
1225 SAME AS ITEM 1219 BUT WITH BASE CONCRETE IN WHITE LIME &SURKHI (1:2)
(EXTRA ON 1219). 1506.57 SQM
1226 SAME AS ITEM 1220 BUT WITH BASE CONCRETE IN WHITE LIME &SURKHI (1:2)
(EXTRA ON 1219). 1621.67 SQM
1227 SAME AS ITEM 1221 BUT WITH BASE CONCRETE IN WHITE LIME &SURKHI (1:2)
(EXTRA ON 1219). 1375.29 SQM
1228 GRANOLYTHIC MARBLE DADO 20 MM TH. WITH 14 MM TH. LAYER OF CEMENT
AND COARSE SAND (1:2) WITH 6 MM TH. SURFACE COAT OF ORDINARY CEMENT. 1278.86 SQM
1229 SAME AS ITEM 1228 BUT WITH WHITE CEMENT IN TOP COAT. 1393.96 SQM
1230 SAME AS ITEM 1228 BUT WITH COLOURED DADO. 1348.54 SQM
1231 SUPPLY AND FIXING OF 15X15 CM CHINA WHITE GLAZED TILES 6 MM TH. IN
FLOORIMG OR IN SKIRTING OR DADO LAID WITH (1:3) CEMENT AND COARSE 1665.88 SQM
12. PAINTING AND DISTEMPERING WORK:-
1232 PAINTING OR VARNISHING ON NEW IRON WORK IN SMALL AREAS OR NEW WOOD
WORK WITH ONE COAT PRIMING AND ONE COAT PAINT OR VARNISH 117.99 SQM
1233 SAME AS ITEM 1232 BUT FOR EVERY COAT AFTER FIRST COAT. 64.12 SQM
1234 SAME AS ITEM 1233 BUT FOR EVERY COAT ON PREVIOUSLY PAINTED SURFACE. 69.35 SQM
1235 PAINTING ROOF OR OTHER WORK IN LARGE AREA WITH ONE COAT PRIMING AND
ONE COAT PAINT OR VARNISH 124.29 SQM
1236 SAME AS ITEM 1235 BUT FOR EVERY COAT AFTER FIRST COAT. 70.36 SQM
1237
SAME AS ITEM 1236 BUT FOR EVERY COAT ON PREVIOUSLY PAINTED SURFACE.
70.00 SQM
 1238 PAINTING OR VARNISHING WITH VALSPER OR HIGH GRADE ENAMEL OR VARNISH
ONE COAT OVER PREVIOUSLY PAINTED SURFACE. 100.23 SQM
1239 SAME AS ITEM 1238 BUT FOR EVERY SUBSEQUENT COAT ON PREVIOUSLY
TREATED SURFACE WITH ENAMEL OR VARNISH. 85.18 SQM
1240 ONE PRIMING & ONE COAT OF OIL DISTEMPER ON NEW WORK. 87.10 SQM
1241 SAME AS ITEM 1240 BUT FOR EVERY COAT AFTER FIRST COAT. 51.50 SQM
1242 SAME AS ITEM 1241 BUT FOR EVERY COAT ON PREVIOUSLY DISTEMPERED
SURFACE. 54.69 SQM
1242-A ONE PRIMING & ONE COAT OF APEX PAINT ON NEW WORK. 99.12 SQM
1242-B SAME AS ITEM 1242-A BUT FOR EVERY COAT AFTER FIRST COAT. 70.15 SQM
1242-C SAME AS ITEM 1242-B BUT FOR EVERY COAT ON PREVIOUSLY DISTEMPERED
SURFACE. 76.97 SQM
1243 ONE COAT OF HOT COAL TAR ON NEW SURFACE. 34.97 SQM
1244 SAME AS ITEM 1243 BUT FOR EVERY COAT AFTER FIRST COAT. 22.21 SQM
1245
ONE COAT SOLIGNUM OR OTHER PRESERVATIVES ON NEW WOOD WORK.
49.21 SQM
1246
SAME AS ITEM 1251 BUT FOR EVERY COAT ON PREVIOUSLY TREATED SURFACE.
30.98 SQM
1247 OILING WOOD WORK WITH DOUBLE BOILED LINSEED OIL 23.70 SQM
1248 REMOVING PAINT OR VARNISH WITH PAINT REMOVER OR CAUSTIC SODA. 37.29 SQM
1249 WAX POLISHING OVER NEW WOOD WORK WITH READY MADE POLISH AFTER
RUBBING DOWN WITH SAND PAPER. 56.18 SQM
1250 SAME AS ITEM 1249 BUT REPOLISHING WOOD WORK ALREADY WAXPOLISHED
WITH READY MADE WAX POLISH. 34.06 SQM
13. WHITE WASHING AND COLOUR WASHING WORK:-
1251 WHITE WASHING ONE COAT 10.26 SQM
1252 SAME AS ITEM NO. 1251 BUT IN TWO COAT 16.01 SQM
1253 SAME AS ITEM NO. 1251 BUT IN THREE COAT 24.92 SQM
1254 COLOUR WASHING ONE COAT USING COLOURING MATERIAL OF BUFF BLUE,
BROWN SHADE. 14.62 SQM
1255 SAME AS ITEM 1254 BUT IN TWO COAT. 24.72 SQM
1256 SAME AS ITEM 1254 BUT USING COLOUR MATERIAL OF PINK, GREEN OR YELLOW
SHADE. 16.36 SQM
1257 SAME AS ITEM 1256 BUT IN TWO COAT. 28.21 SQM
1258 COLOUR WASHING ONE COAT USING COPPER OR IRON SULPHATE. 18.00 SQM
1259 SAME AS ITEM 1258 BUT IN TWO COAT. 31.31 SQM
1260 CEMENT WASHING. 15.03 SQM
1261 ONE PRIMING & ONE COAT OF DRY DISTEMPER ON NEW WORK. 54.42 SQM
1262
SAME AS ITEM 1261 BUT BUT FOR EACH COAT OF DISTEMPER AFTER FIRST COAT.
32.85 SQM
14. DEMOLITION AND DISMENTALLING WORK:-
1263 DISMENTALLING SUNDRIED BRICK WORK. 134.39 CUM
1264
DISMENTALLING BRICK WORK OR STONE WORK IN LIME OR CEMENT MORTAR.
627.14 CUM
1265 SAME AS ITEM 1264 BUT FOR MUD MORTAR. 358.36 CUM
1266 DISMENTALLING R.C.C. OR R.B. WORK. 1415.87 CUM
1267 DISMENTALLING JACH ARCHED OR WOODEN BEAMS & BARJA ROOFS INCLUDING
BEAMS & ROOF CONCRETE. 627.14 CUM
1268 SAME AS 1269 BUT ONLY ROOF CONCRETE. 447.96 CUM
1269 DISMENTALLING CEMENT CONCRETE OR BRICKS OR GRANOLYTHIC FLOORS
INCLUDING BASE CONCRETE. 89.59 SQM
1270 SAME AS ITEM 1269 BUT STONE FLAG OR TILED FLOOR. 89.59 SQM
1271 DISMENTALLING SINGLE TILED ROOF INCLUDING PURLINS & BATTENS. 96.81 SQM
 1272 SAME AS ITEM 1271 BUT DOUBLE TILED ROOF. 164.00 SQM
1273 DISMENTALLING G.I. ROOFS, WALLS OR PARTITIONS INCLUDING PURLINS,
BATTENS & VERTICAL SUPPORTS. 69.99 SQM
1274 DISMENTALLING OF GIRDERS, TRUSSES & OTHER STEEL WORK. 2148.53 QTL
1275
DISMENTALLING DOORS & WINDOWS INCLUDING CHAUKHATS WITH HOLD FASTS.
82.87 SQM
1276 DISMENTALLING DOORS & WINDOWS LEAVES. 42.87 SQM
1277
DISMENTALLING DOORS & WINDOWS EXCLUDING CHAUKHATS WITH HOLD FASTS.
71.65 SQM
1278 DISMENTALLING EXISTING PLASTER. 89.59 SQM
1279 RACKING OUT JOINTS OF BRICK WORKIN CEMENT OR LIME MORTAR TO A DEPTH
OF 10 MM. 44.80 SQM
1280 SCRAPING OLD WHITE OR COLOUR WASHING. 22.40 SQM
15. MISCELLANEOUS WORK:-
1281 S/F BLOCK OF C.P. TEAK WOOD 75X75X120 MM IN WALL WITH 1:3 CEMENT AND
COARSE SAND MORTAR. 295.28 NO.
1282 S/F BRASS CLEATS FOR CLERESTORY WINDOW CORDS OF TEAK WOOD PLATE
100X100X10 MM OVER BLOCKS OF C.P. TEAK WOOD. 285.68 NO.
1283 SAME AS ITEM 1282 BUT WITH OXIDISED IRON CLEATS. 252.28 NO.
1284 SUPPLY AND FIX COTTON CORD FOR CLERESTORY WINDOW. 174.98 KG.
1285 S/F C.P. TEAK WOOD CLEATS 10X75X50 MM TO C.P.TEAK WOOD DOORS AND
WINDOW WITH BRASS HINGES 50 MM. 363.34 NO.
1286 SUPPLY AND FIX 100 MM DIA A.C. DOWN PIPES COMPLETE WITH ROSE, HEADS,
BENDS & GRATINGS WITH M.S. CLAMPS 25 X 3 MM FIXED TO WALLS & SUPPLY OF
150 MM LONG, 6 MM DIA NAILS, REPAIRS OF PLASTER, PAINTINGS ETC. 473.20 RM
COMPLETE.
1286-A SUPPLY AND FIX 100 MM DIA P.V..C. DOWN PIPES COMPLETE WITH SOCKETS,
BENDS & GRATINGS WITH M.S. CLAMPS 25 X 3 MM FIXED TO WALLS & SUPPLY OF
150 MM LONG, 6 MM DIA NAILS, REPAIRS OF PLASTER, PAINTINGS ETC. 389.20 RM
1287 S/F C.P. TEAK WOOD PEG RACK 900X75X25 MM WITH THREE BRASS PEGS ON 75X
75X 120 MM TEAK WOOD BLOCK. 1176.50 NO.
1288 SUPPLY AND FIX 40 MM THICK C.P. TEAK WOOD PANELLED PARTITION WITH TEAK
WOOD FRAMES 100X80 MM TOP, BOTTOM AND SIDE VERTICALS AT 1.50 M
APART. 6415.44 SQM
1289 SUPPLY AND FIX PLAIN ASBESTOS SHEET PARTITION WITH 50X10 MM DEODAR OR
SHEESHAM WOOD BEADING, ERECTION & FIXING. 2200.72 SQM
1290 SAME AS ITEM 1289 BUT WITH MASONITE PARTITIONS. 2259.02 SQM
16. ROAD WORK:-
1291 CONSOLIDATION OF 30 TO 40 MM GAUGE KANKAR BY HAND RAMMER, SORTING
KANKAR INTO THREE SIZES REPAIRING PATCHES IN EXISTING ROAD SURFACE WITH
KANKAR, PICKING UP OLD SURFACE, SPREADING KANKAR, MAKING MEDIS TO
RETAIN WATER & RAMMING WITH CARRIAGE OF MATERIAL & WATER AND
MAINTENANCE OF BARRIERS, CAUTION POSTS, LIGHTS ETC.(EXCLUDING COST OF
KANKAR). 671.05 CUM
1292 SAME AS ITEM 1291 BUT FOR CONSOLIDATION BY ROAD ROLLER. 803.98 CUM
1293 SAME AS ITEM 1291 BUT FOR 120 MM THICK COAT OF BRICK BALLAST. 671.05 CUM
1294 SAME AS ITEM 1292 BUT FOR 80 MM THICK COAT OF BRICK BALLAST. 803.98 CUM
1295 SAME AS ITEM 1292 BUT FOR 120 MM THICK COAT OF BRICK BALLAST. 875.65 CUM
1296 SAME AS ITEM 1292 BUT FOR 80 MM THICK COAT OF STONE BALLAST OVER
EXISTING KANKAR ROAD SURFACE. 1049.77 CUM
1297 WATER ALLOWANCE ON ITEM 1291 TO 1296. 111.99 CUM
1298 DIGGING KANKAR INCLUDING BREAKING, CLEANING & ROLLING AND THE COST OF
BORING TO FIND KANKAR STRATA. 1460.00 CUM
1299
MAKING MUD TREE GUARDS ONE METRE I.D. AND ONE METRE HIGH ABOVE G.L.
918.63 NO.
 1300
DUG BELLING 150 MM DEEP IN ONE LINE ALIGNED WITH FALGS AND JHANDIES.
2973.92 KM
1301 PAINTING WHITE TRAFFIC LINES 75 MM WIDE IN THREE COATS WITH WHITE
APPROVED PAINT. 564.85 SQM
1302 BRICK SOLING WITH STRAIGHT OVER BURNT BRICKS AND DRY WITH BRICK
EDGING LAID VERTICAL ON EITHER SIDE, FILLING THE JOINTS WITH LOCAL EARTH 398.00 SQM
1303 RENEWING PATRIES 3 M WIDE, DRESSING SURFACE , FILLING UPTO THE 8 CM
DEPTH AND MAKING PROFILES OF EVERY 15 M APART. 68.29 RM
1304
BRICK EDGING OF IST. CLASS BRICKS LAID VERTICAL WITH MUD MORTAR.
194.98 RM
1305 STACKING OF ROAD METAL TO THE REQUIRED TEMPLETE AFTER SCREENING AT
ROAD SIDE. 161.68 CUM
1306 BITUMEN PAINTING (LABOUR ONLY) OVER WATER BOUND SURFACE (IST.COAT)
EXCLUDING SUPPLY OF PAINT & GRIT. 49.84 SQM
1307 SAME AS ITEM 1306 BUT SUBSEQUENT COATS OF PAINTING OVER PREVIOUSLY
PAINTED SURFACE. 24.92 SQM
1308 SAME AS ITEM 1306 BUT COLD EMULSION IN IIND. COAT. 41.53 SQM
1309 SAME AS ITEM 1306 BUT WITH TAR IN I COAT. 43.69 SQM
1310 SAME AS ITEM 1306 BUT WITH TAR IN II COAT OR OTHER SUBSEQUENT COATS OF
PAINTING OVER PREVIOUSLY PAINTED SURFACE. 21.85 SQM
1311 SCRAPING OLD PAINTED SURFACE (ROAD SURFACE). 97.65 SQM
1312 LAYING C.C. ROAD SLAB 100 MM TH.IN (1:2:4) CEMENT, COARSE SAND AND STONE
BALLAST OVER PREPARED SURFACE. 13499.72 CUM
1313 SAME AS ITEM 1312 BUT EXCLUDING SUPPLY OF CEMENT, COARSE SAND AND
STONE BALLAST. 6188.46 CUM
1314 BLENDING OF WATER BOUND STONE OR KANKAR ROAD SURFACE WITH LOCAL
EARTH OR SAND IN 15 MM DEEP LAYERS. 15.52 RM
1315 EARTH WORK IN EDGING OF THE PAINTED OR C.C.ROAD IN A WIDTH OF 0.50 M ON
EITHER SIDE & 100 MM DEEP. 29.57 RM
1316 JOINT FILLING IN C.C. ROADS & REMOVING THE OLD TAR OR OTHER MATERIAL
(LABOUR ONLY). 2.47 RM
1317 CONSOLIDATION OF KANKAR BY HAND RAMMER IN PATCH REPAIRING, PICKKING
UP OLD SURFACE UPTO 100 MM DEPTH IN A RECTANGULAR FORM MAKING 50
MM WIDE DRAINS AROUND THE PATCH. 1478.44 CUM
1318 PATCH REPAIR OF SURFACE PAINTED WITH BITUMEN INCLUDING HEATING THE
PAINT OR OTHER MATERIAL (LABOUR ONLY). 5195.04 CUM
1319 CLEANING OF THE EXISTING PAINTED SURFACE & LAYING PREMIX 20 MM THICK
OVER A TACK COAT WITH GRADED GRIT OR BITUMEN (LABOUR ONLY). 62.04 SQM
1320 SAME AS ITEM 1319 BUT IN PATCHES. 2514.18 CUM
1321 CLEANING THE PREMIX SURFACE & LAYING SEAL COAT 6 MM THICK GRADED GRIT
OR BITUMEN INCLUDING HEATING THE PAINT (LABOUR ONLY). 18.49 SQM
1322 SAME AS ITEM 1319 BUT ON WATER BOUND SURFACE. 75.00 SQM
1323 PROVIDE ALL MATERIAL AND CONSTRUCT 100 MM THICK (1:2:4) ROAD FOR
REINSTATEMENT OF PATCH & TRENCH CUTS IN CEMENT CONCRETE ROAD. 2134.35 SQM
1324 SAME AS ITEM NO. 1323 BUT TWO COATS OF BITUMEN PAINTING INSTEAD OF 100
MM THICK CEMENT CONCRETE ROAD. 1427.22 SQM
1325
SAME AS ITEM NO. 1323 BUT EXCLUDING THE CEMENT CONCRETE SLAB.
936.28 SQM
17. ANNUAL REPAIRING WORK:-
1326 MAINTENANCE OF TERRACED ROOF, FILLING OF CRACKS BEFORE RAINS WITH
BITUMENOUS FILTERS. 103.48 SQM
1327 REPAIR OF PLASTER OR POINTING IN PATCHES INCLUDING REMOVAL OF OLD
PLASTER. Extra 25%
1328 REPAIR OF FLOORING IN PATCHES INCLUDING DIGGING UPTO EXISTING THICKNESS
OF FLOORS ,RENEWING THE SAME. Extra 25%
1329 CLEANING THE WELL & THROWING OUT THE SILT TO THE PLACE AS DIRECTED BY
THE ENGINEER IN CHARGE. 1608.28 RM
1330 BLINDING PANES OF GLASS. 155.36 SQM
1331 RENEWING PANES OF GLASS 2.50 MM THICK WITH PUTTY & BEADS. 754.43 SQM
1332 CLEANING DOORS AND WINDOWS WITH ORDINARY OIL OR WATER. 16.32 SQM
1333 FIXING PANES & GLASS INCLUDING PUTTY AND BEADS (EXCLUDING COST OF
GLASS). 324.27 SQM
1334 CLEANING PANES OF GLASS WITH SPRIT OR CAUSTIC SODA. 109.14 SQM
1335 LABOUR FOR FIXING DOORS BOLTS OR HINGES OR TOWER BOLTS OR HASPS OR
HANDLES ETC. TO DOORS & WINDOWS. 24.89 Each
1336
OPENING & REFIXING 100 MM DIA RAIN WATER DOWN PIPE AFTER CLEANING.
91.31 RM
1337 VARNISHING OR POLISHING FURNITURE WITH HIGH GRADE VARNISH OR POLISH
AFTER SAND PAPERING. 223.14 NO.
1338 P C C 1:2:4 ROAD 100 MM THICK OVER 100 MM TH.BASE CONCRETE 1:4:8 1792.54 SQM
 OFFICE OF THE EXECUTIVE ENGINEER, IST. C.D. U.P. JAL NIGAM, GHAZIABAD
SCHEDULE OF RATES FOR THE YEAR 2020-21 (FOR CONSTRUCTION WORKS)
DISTT. GHAZIABAD/MEERUT/BULANDSHAHR/GAUTAM BUDDH NAGAR/BAGHPAT/HAPUR
S O R INCL. OF ALL TAXES VIDE C E (R), LUCKNOW LETTER NO.1195/2042-0024 STA/18 DATED 03.08.2018
Labour & Material rates sanctioned by S.E. 18th Circle, Gzb vide letter no. 257/vividh -13/30 dt. 02-06-2020
CODE DESCRIPTION RATE IN RS. UNIT
1 2 3 4
( B) PIPE LINE WORK :
1. TRENCHING WORK:
2001 EXCAVATION FOR PIPE LINE 0-1.50 M DEEP IN ORDINARY SOIL (LOAM,CLAY,
SAND ) 243.74 CUM
2002 SAME AS ITEM NO. 2001 BUT IN SOIL MIXED WITH
MOORUM/SHINGLE/KANKAR 283.24 CUM
2003 EXTRA ON ITEM NO. 2001 AND 2002 ADDITIONAL LEAD AND LIFT 59.13 CUM
2. LAYING AND JOINTING OF PIPES AND SPECIALS:
2004 CARTING FROM STORE, LAYING, JOINTING, FIXING & TESTING OF 15 MM
DIA.(NOMINAL) M.S.GALVANIZED SCREWED & SOCKETTED PIPES (LIGHT &
MEDIUM), SPECIALS AND FITTINGS (INSIDE HOUSES) 102.69 RM
2005 SAME AS ITEM NO. 2004 BUT FOR 20 MM DIA. 114.07 RM
2006 SAME AS ITEM NO. 2004 BUT FOR 25 MM DIA. 149.27 RM
2007 SAME AS ITEM NO. 2004 BUT FOR 32 MM DIA. 174.32 RM
2008 SAME AS ITEM NO. 2004 BUT FOR 40 MM DIA. 211.19 RM
2009 CARTING FROM STORE, LAYING, JOINTING, FIXING & TESTING OF 15 MM
DIA.(NOMINAL) M.S.GALVANIZED SCREWED & SOCKETTED PIPES ( LIGHT &
MEDIUM), SPECIALS AND FITTINGS (IN TRENCHES OUTSIDE HOUSES) 26.55 RM
2010 SAME AS ITEM NO. 2009 BUT FOR 20 MM DIA. 38.40 RM
2011 SAME AS ITEM NO. 2009 BUT FOR 25 MM DIA. 52.93 RM
2012 SAME AS ITEM NO. 2009 BUT FOR 32 MM DIA. 64.15 RM
2013 SAME AS ITEM NO. 2009 BUT FOR 40 MM DIA. 70.96 RM
2014 SAME AS ITEM NO. 2009 BUT FOR 50 MM DIA. 82.70 RM
2015 SAME AS ITEM NO. 2009 BUT FOR 65 MM DIA. 87.63 RM
2016 SAME AS ITEM NO. 2009 BUT FOR 80 MM DIA. 126.64 RM
2017 SAME AS ITEM NO. 2009 BUT FOR 100 MM DIA. 142.56 RM
2018 SAME AS ITEM NO. 2009 BUT FOR 125 MM DIA. 157.12 RM
2019 SAME AS ITEM NO. 2009 BUT FOR 150 MM DIA. 177.63 RM
2020 CARTING FROM STORE, LAYING, JOINTING, FIXING & TESTING OF 50 MM DIA
CLASS-I & II A.C. PIPES WITH FITTINGS ETC. 27.53 RM
2021 SAME AS ITEM NO. 2020 BUT FOR 65 MM DIA. 34.13 RM
2022 SAME AS ITEM NO. 2020 BUT FOR 80 MM DIA. 36.51 RM
2023 SAME AS ITEM NO. 2020 BUT FOR 100 MM DIA. 43.28 RM
2024 SAME AS ITEM NO. 2020 BUT FOR 125 MM DIA. 54.57 RM
2025 SAME AS ITEM NO. 2020 BUT FOR 150 MM DIA. 62.79 RM
2026 SAME AS ITEM NO. 2020 BUT FOR 200 MM DIA. 76.52 RM
2027 SAME AS ITEM NO. 2020 BUT FOR 250 MM DIA. 94.75 RM
2028 SAME AS ITEM NO. 2020 BUT FOR 300 MM DIA. 109.25 RM
2029 SAME AS ITEM NO. 2020 BUT FOR 350 MM DIA. 160.28 RM
2030 SAME AS ITEM NO. 2020 BUT FOR 400 MM DIA. 220.16 RM
2031 SAME AS ITEM NO. 2020 BUT FOR 450 MM DIA. 271.73 RM
2032 SAME AS ITEM NO. 2020 BUT FOR 500 MM DIA. 335.92 RM
2033 SAME AS ITEM NO. 2020 BUT FOR 600 MM DIA. 465.45 RM
2034 SAME AS ITEM NO. 2020 TO 2033 BUT FOR CLASS III A.C. PIPES (EXTRA ON
ITEM 2020 TO 2033). EXTRA 5% RM
2035 CARTING FROM STORE, LAYING, JOINTING, FIXING & TESTING OF 15 MM
DIA.(I.D.)P.V.C. PIPES & SPECIALS. 8.08 RM
2036 SAME AS ITEM NO. 2033 BUT FOR 20 MM DIA. 9.80 RM
2037 SAME AS ITEM NO. 2033 BUT FOR 25 MM DIA. 10.72 RM
2038 SAME AS ITEM NO. 2033 BUT FOR 32 MM DIA. 12.98 RM
2039 SAME AS ITEM NO. 2033 BUT FOR 40 MM DIA. 14.75 RM
2040 SAME AS ITEM NO. 2033 BUT FOR 50 MM DIA. 22.22 RM
2041 SAME AS ITEM NO. 2033 BUT FOR 65 MM DIA. 30.13 RM
2042 SAME AS ITEM NO. 2033 BUT FOR 80 MM DIA. 37.20 RM
2043 SAME AS ITEM NO. 2033 BUT FOR 100 MM DIA. 41.30 RM
2044 SAME AS ITEM NO. 2033 BUT FOR 125 MM DIA. 45.03 RM
2045 SAME AS ITEM NO. 2033 BUT FOR 150 MM DIA. 57.92 RM
2046 SAME AS ITEM NO. 2033 BUT FOR 180 MM DIA. 64.69 RM
2047 SAME AS ITEM NO. 2033 BUT FOR 200 MM DIA. 72.62 RM
2048 CARTING FROM STORE, LAYING, JOINTING, FIXING & TESTING OFP1 QUALITY
R.C.C. PRESSURE PIPES OF 80 MM DIA.WITH 1:1.50 CEMENT AND SAND 137.29 RM
2049 SAME AS ITEM NO. 2048 BUT FOR 100 MM DIA. 165.38 RM
2050 SAME AS ITEM NO. 2048 BUT FOR 150 MM DIA. 201.90 RM
2051 SAME AS ITEM NO. 2048 BUT FOR 250 MM DIA. 255.11 RM
2052 SAME AS ITEM NO. 2048 BUT FOR 300 MM DIA. 289.68 RM
2053 SAME AS ITEM NO. 2048 BUT P2 QUALITY FOR 80 MM DIA. PIPES 137.29 RM
2054 SAME AS ITEM NO. 2049 BUT P2 QUALITY FOR 100 MM DIA. PIPES 165.38 RM
2055 SAME AS ITEM NO. 2050 BUT P2 QUALITY FOR 150 MM DIA. PIPES 201.90 RM
2056
SAME AS ITEM NO. 2055 BUT FOR P2 QUALITY OF 250 MM DIA. PIPES 265.31 RM
2057
SAME AS ITEM NO. 2055 BUT FOR P2 QUALITY OF 300 MM DIA. PIPES 315.10 RM
2058
SAME AS ITEM NO. 2055 BUT FOR P2 QUALITY OF 350 MM DIA. PIPES 450.49 RM
2059
SAME AS ITEM NO. 2055 BUT FOR P2 QUALITY OF 400 MM DIA. PIPES 540.25 RM
2060
SAME AS ITEM NO. 2055 BUT FOR P2 QUALITY OF 450 MM DIA. PIPES 596.17 RM
2061
SAME AS ITEM NO. 2055 BUT FOR P2 QUALITY OF 500 MM DIA. PIPES 703.06 RM
2062
SAME AS ITEM NO. 2055 BUT FOR P2 QUALITY OF 600 MM DIA. PIPES 883.95 RM
2063
SAME AS ITEM NO. 2048 BUT FOR P3 QUALITY OF 80 MM DIA. PIPES 137.29 RM
2064
SAME AS ITEM NO. 2049 BUT FOR P3 QUALITY OF 100 MM DIA. PIPES 165.38 RM
2065
SAME AS ITEM NO. 2050 BUT FOR P3 QUALITY OF 150 MM DIA. PIPES 201.90 RM
2066 SAME AS ITEM NO. 2065 BUT FOR 250 MM DIA. PIPES 277.43 RM
2067 SAME AS ITEM NO. 2065 BUT FOR 300 MM DIA. PIPES 329.02 RM
2068 SAME AS ITEM NO. 2065 BUT FOR 350 MM DIA. PIPES 455.86 RM
2069 SAME AS ITEM NO. 2065 BUT FOR 400 MM DIA. PIPES 539.19 RM
2070 CARTING FROM STORE, LAYING, JOINTING, FIXING & TESTING OF C.I. S & S
AND FLANGED (CLASS 'LA' AND 'A') PIPES & SPECIALS OF 80 MM DIA. 38.40 RM
2071 SAME AS ITEM NO. 2070 BUT FOR 100 MM DIA. PIPES 49.20 RM
2072 SAME AS ITEM NO. 2070 BUT FOR 125 MM DIA. PIPES 63.59 RM
2073 SAME AS ITEM NO. 2070 BUT FOR 150 MM DIA. PIPES 79.19 RM
2074 SAME AS ITEM NO. 2070 BUT FOR 200 MM DIA. PIPES 115.79 RM
2075 SAME AS ITEM NO. 2070 BUT FOR 250 MM DIA. PIPES 155.99 RM
2076 SAME AS ITEM NO. 2070 BUT FOR 300 MM DIA. PIPES 201.58 RM
2077 SAME AS ITEM NO. 2070 BUT FOR C.I. SCREWED FLANGED PIPES (CLASS
'A')80 MM DIA. PIPES 43.80 RM
2078 SAME AS ITEM NO. 2077 BUT FOR 100 MM DIA. PIPES 55.20 RM
2079 SAME AS ITEM NO. 2077 BUT FOR 125 MM DIA. PIPES 71.39 RM
2080 SAME AS ITEM NO. 2077 BUT FOR 150 MM DIA. PIPES 89.39 RM
2081 SAME AS ITEM NO. 2077 BUT FOR 200 MM DIA. PIPES 128.99 RM
2082 SAME AS ITEM NO. 2077 BUT FOR 250 MM DIA. PIPES 173.39 RM
2083 SAME AS ITEM NO. 2077 BUT FOR 300 MM DIA. PIPES 223.18 RM
2084 C.I. FLANGED PIPES VERTICALLY CAST CLASS 'A'- RATE SAME AS FOR ITEM Same as
2077 TO 2083 2077 to 2083 RM
2085 SAME AS ITEM NO. 2070 BUT FOR 350 MM DIA. PIPES 271.40 RM
2086 SAME AS ITEM NO. 2070 BUT FOR 400 MM DIA. PIPES 329.79 RM
2087 SAME AS ITEM NO. 2070 BUT FOR 450 MM DIA. PIPES 397.80 RM
2088 SAME AS ITEM NO. 2070 BUT FOR 500 MM DIA. PIPES 466.46 RM
2089 SAME AS ITEM NO. 2070 BUT FOR 600 MM DIA. PIPES 621.09 RM
2090 SAME AS ITEM NO. 2070 BUT FOR 700 MM DIA. PIPES 802.02 RM
2091 SAME AS ITEM NO. 2070 BUT FOR 750 MM DIA. PIPES 898.26 RM
2092 C.I. FLANGED PIPES VERTICALLY CAST CLASS 'A'- RATE SAME AS FOR 350 MM.
RATE SAME AS ITEM NO. 2085 271.40 RM
2093 SAME AS ITEM NO. 2085 BUT FOR 400 MM DIA. PIPES 370.43 RM
2094 SAME AS ITEM NO. 2085 BUT FOR 450 MM DIA. PIPES 445.71 RM
2095 SAME AS ITEM NO. 2085 BUT FOR 500 MM DIA. PIPES 519.28 RM
2096 SAME AS ITEM NO. 2085 BUT FOR 600 MM DIA. PIPES 694.66 RM
2097 SAME AS ITEM NO. 2085 BUT FOR 700 MM DIA. PIPES 901.69 RM
2098 SAME AS ITEM NO. 2085 BUT FOR 750 MM DIA. PIPES 1014.61 RM
2099 SAME AS ITEM 2070 BUT C.I. S&S PIPES (VERTICALLY CAST CLASS-'A')800 MM
DIA. 1012.18 RM
2100 SAME AS ITEM 2070 BUT C.I. S&S PIPES (VERTICALLY CAST CLASS-'A') 900
MM DIA. 1235.13 RM
2101 SAME AS ITEM 2070 BUT C.I. S&S PIPES (VERTICALLY CAST CLASS-'A') 1000
MM DIA. 1485.63 RM
2102 SAME AS ITEM 2099 BUT C.I. S&S PIPES (VERTICALLY CAST CLASS-'A') 800
MM DIA. 1071.18 RM
2103 SAME AS ITEM 2099 BUT C.I. S&S PIPES (VERTICALLY CAST CLASS-'A') 900
MM DIA. 1299.28 RM
2104 SAME AS ITEM 2099 BUT C.I. S&S PIPES (VERTICALLY CAST CLASS-'A') 1000
MM DIA. 1571.72 RM
2105 SAME AS ITEM 2070 BUT C.I. S&S PIPES (VERTICALLY CAST CLASS-'A') 1100
MM DIA. 1646.27 RM
2106 SAME AS ITEM 2070 BUT C.I. S&S PIPES (VERTICALLY CAST CLASS-'A') 1200
MM DIA. 1918.98 RM
2107 CARTING FROM STORE, LAYING, JOINTING, FIXING & TESTING OF C.I.
SCREWED FLANGED SPUN PIPES (CLASS 'A') VERTICALLY CAST PIPES &
SPECIALS HOISTING AND ERECTING IN VERTICAL POSITION (UP TO 8 M 140.20 RM
2108 SAME AS ITEM NO. 2107 BUT 100 MM DIA. 174.77 RM
2109 SAME AS ITEM NO. 2107 BUT 125 MM DIA. 228.54 RM
2110 SAME AS ITEM NO. 2107 BUT 150 MM DIA. 286.16 RM
2111 SAME AS ITEM NO. 2107 BUT 200 MM DIA. 412.92 RM
2112 SAME AS ITEM NO. 2107 BUT 250 MM DIA. 555.04 RM
2113 SAME AS ITEM NO. 2107 BUT 300 MM DIA. 716.36 RM
2114 SAME AS ITEM NO. 2107 BUT 8.0 - 16.0 HIGH 80 MM DIA. 232.15 RM
2115 SAME AS ITEM NO. 2107 BUT 8.0 - 16.0 HIGH 100 MM DIA. 289.39 RM
2116 SAME AS ITEM NO. 2107 BUT 8.0 - 16.0 HIGH 125 MM DIA. 378.43 RM
2117 SAME AS ITEM NO. 2107 BUT 8.0 - 16.0 HIGH 150 MM DIA. 473.83 RM
2118 SAME AS ITEM NO. 2107 BUT 8.0 - 16.0 HIGH 200 MM DIA. 683.72 RM
2119 SAME AS ITEM NO. 2107 BUT 8.0 - 16.0 HIGH 250 MM DIA. 919.04 RM
2120 SAME AS ITEM NO. 2107 BUT 8.0 - 16.0 HIGH 300 MM DIA. 1186.17 RM
2121 SAME AS ITEM NO. 2107 BUT 16.0 - 24.0 HIGH 80 MM DIA. 365.32 RM
2122 SAME AS ITEM NO. 2107 BUT 16.0 - 24.0 HIGH 100 MM DIA. 455.40 RM
2123 SAME AS ITEM NO. 2107 BUT 16.0 - 24.0 HIGH 125 MM DIA. 595.52 RM
2124 SAME AS ITEM NO. 2107 BUT 16.0 - 24.0 HIGH 150 MM DIA. 745.65 RM
2125 SAME AS ITEM NO. 2107 BUT 16.0 - 24.0 HIGH 200 MM DIA. 1075.93 RM
2126 SAME AS ITEM NO. 2107 BUT 16.0 - 24.0 HIGH 250 MM DIA. 1446.26 RM
2127 SAME AS ITEM NO. 2107 BUT 16.0 - 24.0 HIGH 300 MM DIA. 1866.62 RM
2128 SAME AS ITEM NO. 2107 BUT VERTICALLY CAST PIPES 350 MM DIA. 927.70 RM
2129 SAME AS ITEM NO. 2107 BUT VERTICALLY CAST PIPES 400 MM DIA. 1137.94 RM
2130 SAME AS ITEM NO. 2107 BUT VERTICALLY CAST PIPES 450 MM DIA. 1369.21 RM
2131 SAME AS ITEM NO. 2107 BUT VERTICALLY CAST PIPES 500 MM DIA. 1595.22 RM
2132 SAME AS ITEM NO. 2107 BUT VERTICALLY CAST PIPES 600 MM DIA. 2133.97 RM
2133 SAME AS ITEM NO. 2107 BUT VERTICALLY CAST PIPES 700 MM DIA. 2769.95 RM
2134 SAME AS ITEM NO. 2107 BUT VERTICALLY CAST PIPES 750 MM DIA. 3116.85 RM
2135 SAME AS ITEM NO. 2128 BUT 8.0 - 16.0 HIGH 350 MM DIA. 1232.21 RM
2136 SAME AS ITEM NO. 2128 BUT 8.0 - 16.0 HIGH 400 MM DIA. 1511.47 RM
2137 SAME AS ITEM NO. 2128 BUT 8.0 - 16.0 HIGH 450 MM DIA. 1818.65 RM
2138 SAME AS ITEM NO. 2128 BUT 8.0 - 16.0 HIGH 500 MM DIA. 2118.84 RM
2139 SAME AS ITEM NO. 2128 BUT 8.0 - 16.0 HIGH 600 MM DIA. 2834.43 RM
2140 SAME AS ITEM NO. 2128 BUT 8.0 - 16.0 HIGH 700 MM DIA. 3679.18 RM
2141 SAME AS ITEM NO. 2128 BUT 8.0 - 16.0 HIGH 7500 MM DIA. 4139.95 RM
2142 SAME AS ITEM NO. 2128 BUT 16.0 - 24.0 HIGH 350 MM DIA. 1724.06 RM
2143 SAME AS ITEM NO. 2128 BUT 16.0 - 24.0 HIGH 400 MM DIA. 2114.79 RM
2144 SAME AS ITEM NO. 2128 BUT 16.0 - 24.0 HIGH 450 MM DIA. 2544.58 RM
2145 SAME AS ITEM NO. 2128 BUT 16.0 - 24.0 HIGH 500 MM DIA. 2964.61 RM
2146 SAME AS ITEM NO. 2128 BUT 16.0 - 24.0 HIGH 600 MM DIA. 3965.83 RM
2147 SAME AS ITEM NO. 2128 BUT 16.0 - 24.0 HIGH 700 MM DIA. 5147.77 RM
2148 SAME AS ITEM NO. 2128 BUT 16.0 - 24.0 HIGH 750 MM DIA. 5792.46 RM
2149 CARTING FROM STORE, LAYING & TESTING OF STEEL CYLINDER REINFORCED
PIPES (CLASS '3') & SPECIALS OF 200 MM DIA. 168.33 RM
2150 SAME AS ITEM NO. 2149 BUT FOR 250 MM DIA. 218.54 RM
2151 SAME AS ITEM NO. 2149 BUT FOR 300 MM DIA. 250.16 RM
2152 SAME AS ITEM NO. 2149 BUT FOR 350 MM DIA. 313.84 RM
2153 SAME AS ITEM NO. 2149 BUT FOR 400 MM DIA. 363.66 RM
2154 SAME AS ITEM NO. 2149 BUT FOR 450 MM DIA. 452.51 RM
2155 SAME AS ITEM NO. 2149 BUT FOR 500 MM DIA. 516.76 RM
2156 SAME AS ITEM NO. 2149 BUT FOR 600 MM DIA. 629.64 RM
2157 SAME AS ITEM NO. 2149 BUT FOR 700 MM DIA. 771.97 RM
2158 SAME AS ITEM NO. 2149 BUT FOR 900 MM DIA. 1006.35 RM
2159 SAME AS ITEM NO. 2149 BUT FOR 1100 MM DIA. 1307.79 RM
2160 SAME AS ITEM NO. 2149 BUT FOR 1200 MM DIA. 1560.60 RM
2161 MAKING LEAD & SPUN YARN JOINTS OF C.I. S & S PIPES & SPECIALS 80 MM
DIA. 773.40 JNT
2162 SAME AS ITEM NO. 2161 BUT 100 MM DIA. 974.51 JNT
2163 SAME AS ITEM NO. 2161 BUT 125 MM DIA. 1139.99 JNT
2164 SAME AS ITEM NO. 2161 BUT 150 MM DIA. 1436.44 JNT
2165 SAME AS ITEM NO. 2161 BUT 200 MM DIA. 2072.36 JNT
2166 SAME AS ITEM NO. 2161 BUT 250 MM DIA. 2520.09 JNT
2167 SAME AS ITEM NO. 2161 BUT 300 MM DIA. 2885.90 JNT
2168 SAME AS ITEM NO. 2161 BUT 400 MM DIA. 3399.83 JNT
2169 SAME AS ITEM NO. 2161 BUT 450 MM DIA. 3994.19 JNT
2170 SAME AS ITEM NO. 2161 BUT 400 MM DIA. 5473.19 JNT
2171 SAME AS ITEM NO. 2161 BUT 500 MM DIA. 5914.47 JNT
2172 SAME AS ITEM NO. 2161 BUT 600 MM DIA. 7500.22 JNT
2173 SAME AS ITEM NO. 2161 BUT 700 MM DIA. 8752.08 JNT
2174 SAME AS ITEM NO. 2161 BUT 750 MM DIA. 10042.72 JNT
2175 SAME AS ITEM NO. 2161 BUT 800 MM DIA. 12424.28 JNT
2176 SAME AS ITEM NO. 2161 BUT 900 MM DIA. 13977.32 JNT
2177 SAME AS ITEM NO. 2161 BUT 1000 MM DIA. 16101.99 JNT
2178 SAME AS ITEM NO. 2161 BUT 1100 MM DIA. 18111.30 JNT
2179 SAME AS ITEM NO. 2161 BUT 1200 MM DIA. 19768.35 JNT
2180 MAKING JOINTS OF FLANGED PIPES & SPECIALS 80 MM DIA. 318.07 JNT
2181 SAME AS ITEM NO. 2180 BUT 100 MM DIA. 470.36 JNT
2182 SAME AS ITEM NO. 2180 BUT 125 MM DIA. 536.35 JNT
2183 SAME AS ITEM NO. 2180 BUT 150 MM DIA. 721.12 JNT
2184 SAME AS ITEM NO. 2180 BUT 200 MM DIA. 817.24 JNT
2185 SAME AS ITEM NO. 2180 BUT 250 MM DIA. 1141.14 JNT
2186 SAME AS ITEM NO. 2180 BUT 300 MM DIA. 1255.83 JNT
2187 SAME AS ITEM NO. 2180 BUT 350 MM DIA. 1665.37 JNT
2188 SAME AS ITEM NO. 2180 BUT 400 MM DIA. 2235.66 JNT
2189 SAME AS ITEM NO. 2180 BUT 450 MM DIA. 2778.26 JNT
2190 SAME AS ITEM NO. 2180 BUT 500 MM DIA. 3007.72 JNT
2191 SAME AS ITEM NO. 2180 BUT 600 MM DIA. 3879.04 JNT
2192 SAME AS ITEM NO. 2180 BUT 700 MM DIA. 4730.26 JNT
2193 SAME AS ITEM NO. 2180 BUT 750 MM DIA. 4912.86 JNT
2194 SAME AS ITEM NO. 2180 BUT 800 MM DIA. 6300.23 JNT
2195 SAME AS ITEM NO. 2180 BUT 900 MM DIA. 7969.13 JNT
2196 SAME AS ITEM NO. 2180 BUT 1000 MM DIA. 10197.62 JNT
2197 CARTING, LAYING & TESTING OF C.I. S & S CLASS 'LA' TYTON JOINTS & LEAD
JOINT & PIPES & SPECIALS 80 MM DIA. 31.18 RM
2198 SAME AS ITEM NO. 2197 BUT FOR 100 MM DIA. 39.95 RM
2199 SAME AS ITEM NO. 2197 BUT FOR 125 MM DIA. 51.65 RM
2200 SAME AS ITEM NO. 2197 BUT FOR 150 MM DIA. 64.31 RM
2201 SAME AS ITEM NO. 2197 BUT FOR 200 MM DIA. 94.04 RM
2202 SAME AS ITEM NO. 2197 BUT FOR 250 MM DIA. 126.68 RM
2203 SAME AS ITEM NO. 2197 BUT FOR 300 MM DIA. 163.71 RM
2204 SAME AS ITEM NO. 2197 BUT FOR 350 MM DIA. 196.20 RM
2205 SAME AS ITEM NO. 2197 BUT FOR 400 MM DIA. 238.41 RM
2206 SAME AS ITEM NO. 2197 BUT FOR 450 MM DIA. 287.57 RM
2207 SAME AS ITEM NO. 2197 BUT FOR 500 MM DIA. 337.20 RM
2208 SAME AS ITEM NO. 2197 BUT FOR 600 MM DIA. 448.98 RM
2209 SAME AS ITEM NO. 2197 BUT FOR 700 MM DIA. 579.78 RM
2210 SAME AS ITEM NO. 2197 BUT FOR 750 MM DIA. 649.36 RM
2211 MAKE SPECIAL RUBBER GASKET TYTON JOINT C.I. S & S PIPES & SPECIALS ALL
CLASSES 80 MM OR 100 MM DIA. 36.15 JNT
2212 SAME AS ITEM NO. 2211 BUT FOR 125 OR 150 MM DIA. 50.44 JNT
2213 SAME AS ITEM NO. 2211 BUT FOR 200 MM DIA. 61.22 JNT
2214 SAME AS ITEM NO. 2211 BUT FOR 250 MM DIA. 77.23 JNT
2215 SAME AS ITEM NO. 2211 BUT FOR 300 MM DIA. 103.59 JNT
2216 SAME AS ITEM NO. 2211 BUT FOR 350 MM DIA. 130.31 JNT
2217 SAME AS ITEM NO. 2211 BUT FOR 400 MM DIA. 156.58 JNT
2218 SAME AS ITEM NO. 2211 BUT FOR 450 MM DIA. 177.55 JNT
2219 SAME AS ITEM NO. 2211 BUT FOR 500 MM DIA. 205.53 JNT
2220 SAME AS ITEM NO. 2211 BUT FOR 600 MM DIA. 224.63 JNT
2221 SAME AS ITEM NO. 2211 BUT FOR 700 MM DIA. 273.37 JNT
2222 SAME AS ITEM
MAKING RUBBERNO.RING
2211 BUT FOR 750
FLANGED MM DIA. C.I. DETACHABLE JOINTS)
JOINTS(USING 321.93 JNT
2223 A.C. PRESSURE PIPES & C.I. PLAIN ENDED SPECIALS ALL CLASSES 50, 80 OR
100 MM DIA. 36.15 JNT
2224 SAME AS ITEM NO. 2223 BUT 125 MM OR 150 MM DIA. 50.44 JNT
2225 SAME AS ITEM NO. 2223 BUT 200 MM DIA. 61.22 JNT
2226 SAME AS ITEM NO. 2223 BUT 250 MM DIA. 77.23 JNT
2227 SAME AS ITEM NO. 2223 BUT 300 MM DIA. 103.59 JNT
2228 MAKING JOINTS OF STEEL CYLINDER REINFORCED CONCRETE PIPES &
SPECIALS ALL CLASSES 200 MM DIA. 1951.07 JNT
2229 SAME AS ITEM NO. 2228 BUT 250 MM DIA. 2599.44 JNT
2230 SAME AS ITEM NO. 2228 BUT 300 MM DIA. 3205.85 JNT
2231 SAME AS ITEM NO. 2228 BUT 350 MM DIA. 3823.86 JNT
2232 SAME AS ITEM NO. 2228 BUT 400 MM DIA. 4441.44 JNT
2233 SAME AS ITEM NO. 2228 BUT 450 MM DIA. 5410.77 JNT
2234 SAME AS ITEM NO. 2228 BUT 500 MM DIA. 6053.99 JNT
2235 SAME AS ITEM NO. 2228 BUT 600 MM DIA. 7157.91 JNT
2236 SAME AS ITEM NO. 2228 BUT 700 MM DIA. 8768.55 JNT
2237 SAME AS ITEM NO. 2228 BUT 900 MM DIA. 11814.74 JNT
2238 SAME AS ITEM NO. 2228 BUT 1100 MM DIA. 13142.46 JNT
2239 SAME AS ITEM NO. 2228 BUT 1200 MM DIA. 16005.00 JNT
2240 RATE TO REGULATE PAYMENT OF EXCESS NO. OF 1: 1.5 CEMENT MORTAR
JOINTS IN 80 SIZE P1 QUALITY R.C.C. PRESSURE PIPE. 164.99 JNT
2241 SAME AS ITEM NO. 2240 BUT FOR 100 MM DIA. 196.09 JNT
2242 SAME AS ITEM NO. 2240 BUT FOR 150 MM DIA. 221.46 JNT
2243 SAME AS ITEM NO. 2240 BUT FOR 250 MM DIA. 254.87 JNT
2244 SAME AS ITEM NO. 2240 BUT FOR 300 MM DIA. 347.29 JNT
2245 SAME AS ITEM NO. 2240 BUT FOR P2 QUALITY PIPES 80 MM DIA. 164.99 JNT
2246 SAME AS ITEM NO. 2240 BUT FOR P2 QUALITY PIPES 100 MM DIA. 196.09 JNT
2247 SAME AS ITEM NO. 2240 BUT FOR P2 QUALITY PIPES 150 MM DIA. 221.46 JNT
2248 SAME AS ITEM NO. 2247 BUT FOR 250 MM DIA. 260.96 JNT
2249 SAME AS ITEM NO. 2247 BUT FOR 300 MM DIA. 368.99 JNT
2250 SAME AS ITEM NO. 2247 BUT FOR 350 MM DIA. 423.39 JNT
2251 SAME AS ITEM NO. 2247 BUT FOR 400 MM DIA. 472.60 JNT
2252 SAME AS ITEM NO. 2247 BUT FOR 450 MM DIA. 570.49 JNT
2253 SAME AS ITEM NO. 2247 BUT FOR 500 MM DIA. 628.10 JNT
2254 SAME AS ITEM NO. 2247 BUT FOR 600 MM DIA. 751.35 JNT
2255 SAME AS ITEM NO. 2240 BUT FOR P3 QUALITY PIPES 80 MM DIA. 164.99 JNT
 2256 SAME AS ITEM NO. 2241 BUT FOR P3 QUALITY PIPES 100 MM DIA. 196.09 JNT
2257 SAME AS ITEM NO. 2242 BUT FOR P3 QUALITY PIPES 150 MM DIA. 221.46 JNT
2258 SAME AS ITEM NO. 2257 BUT FOR 250 MM DIA. 267.50 JNT
2259 SAME AS ITEM NO. 2257 BUT FOR 300 MM DIA. 375.42 JNT
2260 SAME AS ITEM NO. 2257 BUT FOR 350 MM DIA. 445.85 JNT
2261 SAME AS ITEM NO. 2257 BUT FOR 400 MM DIA. 504.92 JNT
2262 RATE TO REGULATE PAYMENT FOR MAKING LEAD AND SPUN YARN JOINTS
IN R.C.C. P1 QUALITY PIPES 80 MM DIA. 1005.42 JNT
2263 SAME AS ITEM NO. 2262 BUT FOR 100 MM DIA. 1218.14 JNT
2264 SAME AS ITEM NO. 2262 BUT FOR 150 MM DIA. 1680.64 JNT
2265 SAME AS ITEM NO. 2262 BUT FOR 250 MM DIA. 2822.50 JNT
2266 SAME AS ITEM NO. 2262 BUT FOR 300 MM DIA. 3174.49 JNT
2267 SAME AS ITEM NO. 2262 BUT FOR P2 QUALITY PIPES 80 MM DIA. 1005.42 JNT
2268 SAME AS ITEM NO. 2263 BUT FOR 100 MM DIA. 1218.14 JNT
2269 SAME AS ITEM NO. 2264 BUT FOR 150 MM DIA. 1680.64 JNT
2270 SAME AS ITEM NO. 2264 BUT FOR 250 MM DIA. 2847.70 JNT
2271 SAME AS ITEM NO. 2264 BUT FOR 300 MM DIA. 3347.64 JNT
2272 SAME AS ITEM NO. 2264 BUT FOR 350 MM DIA. 3909.80 JNT
2273 SAME AS ITEM NO. 2264 BUT FOR 400 MM DIA. 4633.26 JNT
2274 SAME AS ITEM NO. 2264 BUT FOR 450 MM DIA. 6239.43 JNT
2275 SAME AS ITEM NO. 2264 BUT FOR 500 MM DIA. 6742.49 JNT
2276 SAME AS ITEM NO. 2264 BUT FOR 600 MM DIA. 8625.26 JNT
2277 SAME AS ITEM NO. 2262 BUT FOR P3 QUALITY PIPES 80 MM DIA. 1005.42 JNT
2278 SAME AS ITEM NO. 2263 BUT FOR 100 MM DIA. 1218.14 JNT
2279 SAME AS ITEM NO. 2263 BUT FOR 150 MM DIA. 1680.64 JNT
2280 SAME AS ITEM NO. 2263 BUT FOR 250 MM DIA. 2923.30 JNT
2281 SAME AS ITEM NO. 2263 BUT FOR 300 MM DIA. 3463.08 JNT
2282 SAME AS ITEM NO. 2263 BUT FOR 350 MM DIA. 4113.79 JNT
2283 SAME AS ITEM NO. 2263 BUT FOR 400 MM DIA. 4912.85 JNT

3.CUTTING AND CONNECTIONS OF PIPES AND SPECIALS:

2284 CUTTING 15-25 MM DIA M.S.GALVANIZED PIPES INCLUDING THREADING,
SHAPING AND FINISHING THE ENDS. 24.81 CUT
2285 SAME AS ITEM NO. 2284 BUT FOR 32 TO 50 MM DIA. 37.26 CUT
2286 SAME AS ITEM NO. 2284 BUT FOR 65 TO 80 MM DIA. 49.33 CUT
2287 SAME AS ITEM NO. 2284 BUT FOR 100 TO 150 MM DIA. 99.99 CUT
2288 CUTTING 50 - 100 MM DIAA.C. PIPES INCLUDING THREADING, SHAPING AND
FINISHING THE ENDS. 82.82 CUT
2289 SAME AS ITEM NO. 2288 BUT FOR 125 OR 150 MM DIA. 108.84 CUT
2290 SAME AS ITEM NO. 2288 BUT FOR 200 OR 250 MM DIA. 163.25 CUT
2291 SAME AS ITEM NO. 2288 BUT FOR 300 MM DIA. 217.67 CUT
2292 CUTTING C.I. (SPUN) PIPES (CLASS 'LA' AND 'A') OR SPECIALS INCLUDING
THREADING, SHAPING AND FINISHING THE ENDS. 272.09 CUT
2293 SAME AS ITEM NO. 2292 BUT FOR 350 TO 750 MM DIA. 880.98 CUT
2294 SAME AS ITEM NO. 2292 BUT FOR 800 TO 1000 MM DIA. 2038.20 CUT
2295 SAME AS ITEM NO. 2292 BUT FOR 1100 TO 1200 MM DIA. 3294.72 CUT
2296 CUTTING 200 TO 400 MM DIA STEEL CYLINDER R.C.C. PIPES AND SPECIAL
INCLUDING THREADING, SHAPING AND FINISHING THE ENDS. 748.25 CUT
2297 SAME AS ITEM NO. 2296 BUT FOR 450 MM TO 600 MM DIA. 1564.53 CUT
2298 SAME AS ITEM NO. 2296 BUT FOR 700 MM TO 900 MM DIA. 3197.07 CUT
2299 SAME AS ITEM NO. 2296 BUT FOR 1000 MM TO 1200 MM DIA. 4761.60 CUT
 2300 MAKING CONNECTION WITH EXISTING M.S. GALVANIZED MAINS UPTO 25
MM DIA. 816.27 CONN.
2301 SAME AS ITEM NO. 2300 BUT FOR 32 MM TO 40 MM DIA. 1089.33 CONN.
2302 SAME AS ITEM NO. 2300 BUT FOR 50 MM TO 80 MM DIA. 1428.48 CONN.
2303 SAME AS ITEM NO. 2300 BUT FOR 100 MM TO 150 MM DIA. 2652.89 CONN.
2304 CUTTING OF EXISTING A.C. MAINS OF 50 MM TO 125 MM DIA. MAKING
CONNECTION, BAILING OUT OF WATER ETC. 2223.04 CONN.
2305 SAME AS ITEM NO. 2304 BUT FOR 150 MM TO 300 MM DIA. 3640.47 CONN.
2306 CUTTING OF EXISTING C.I. S & S OR FLANGED MAINS 80 MM TO 150 MM
DIA. MAKING CONNECTION, BAILING OUT OF WATER ETC. 1806.75 CONN.
2307 SAME AS ITEM NO. 2306 BUT FOR 200 MM TO 300 MM DIA. 4181.30 CONN.
2308 SAME AS ITEM NO. 2306 BUT FOR 350 MM TO 450 MM DIA. 7189.49 CONN.
2309 SAME AS ITEM NO. 2306 BUT FOR 500 MM TO 600 MM DIA. 9026.98 CONN.
2310 SAME AS ITEM NO. 2306 BUT FOR 700 MM TO 750 MM DIA. 12064.36 CONN.
2311 SAME AS ITEM NO. 2306 BUT FOR 800 MM TO 1000 MM DIA. 17792.42 CONN.
2312 SAME AS ITEM NO. 2306 BUT FOR 1100 MM TO 1200 MM DIA. 21178.98 CONN.

4.DISMENTALLING WORK:
2313 DISMENTALLING OF 15 MM DIA. SCREWED AND SOCKETTED M.S.
GALVANIZED PIPES, SPECIALS AND FITTINGS INCLUDING TAKEN OUT FROM
INTERNAL WORKS. 56.43 RM
2314 SAME AS ITEM NO. 2313 BUT FOR 20 MM DIA. 79.49 RM
2315 SAME AS ITEM NO. 2313 BUT FOR 25 MM DIA. 119.23 RM
2316 SAME AS ITEM NO. 2313 BUT FOR 32 MM DIA. 150.96 RM
2317 SAME AS ITEM NO. 2313 BUT FOR 40 MM DIA. 166.99 RM
2318
SAME AS ITEM NO. 2313 BUT TAKEN OUT FROM TRENCHES 15 MM DIA. 20.55 RM
2319 SAME AS ITEM NO. 2318 BUT FOR 20 MM DIA. 28.52 RM
2320 SAME AS ITEM NO. 2318 BUT FOR 25 MM DIA. 40.21 RM
2321 SAME AS ITEM NO. 2318 BUT FOR 32 MM DIA. 52.29 RM
2322 SAME AS ITEM NO. 2318 BUT FOR 40 MM DIA. 56.35 RM
2323 SAME AS ITEM NO. 2318 BUT FOR 50 MM DIA. 75.46 RM
2324 SAME AS ITEM NO. 2318 BUT FOR 65 MM DIA. 96.93 RM
2325 SAME AS ITEM NO. 2318 BUT FOR 80 MM DIA. 120.01 RM
2326 SAME AS ITEM NO. 2318 BUT FOR 100 MM DIA. 159.22 RM
2327 SAME AS ITEM NO. 2318 BUT FOR 125 MM DIA. 198.49 RM
2328 SAME
TAKING ASOUT
ITEM50NO.
MM 2318
TOBUT FOR 150
80 MM DIA.MM
A.C.DIA.
PRESSURE PIPES, SPECIALS AND 236.50 RM
2329 PIPES & FITTINGS (EXCLUDING DISMENTALLING AND REMOVAL OF D-
JOINTS) 21.35 RM
2330 SAME AS ITEM NO. 2329 BUT FOR 100 MM DIA. 26.06 RM
2331 SAME AS ITEM NO. 2329 BUT FOR 125 MM DIA. 30.77 RM
2332 SAME AS ITEM NO. 2329 BUT FOR 150 MM DIA. 36.05 RM
2333 SAME AS ITEM NO. 2329 BUT FOR 200 MM DIA. 41.54 RM
2334 SAME AS ITEM NO. 2329 BUT FOR 250 MM DIA. 51.80 RM
2335 SAME AS ITEM NO. 2329 BUT FOR 300 MM DIA. 62.35 RM
2336 DISMENTALLING OF LEAD CAULKED JOINTS OF 80 MM TO 300 MM DIA.C.I.
PIPES, SPECIALS AND FITTINGS. 558.57 JNT
2337 SAME AS ITEM NO. 2336 BUT FOR 350 MM TO 600 MM DIA. 1296.77 JNT
2338 SAME AS ITEM NO. 2336 BUT FOR 700 MM TO 900 MM DIA. 2399.83 JNT
2339 SAME AS ITEM NO. 2336 BUT FOR 1000 MM TO 1200 MM DIA. 4092.02 JNT
2340 DISMENTALLING FLANGED JOINTS OF 80 MM DIA.C.I. PIPES, SPECIALS AND
FITTINGS. 160.35 JNT
2341 SAME AS ITEM NO. 2340 BUT FOR 100 MM - 200 MM DIA. 314.54 JNT
2342 SAME AS ITEM NO. 2340 BUT FOR 250 MM - 300 MM DIA. 462.56 JNT
2343 SAME AS ITEM NO. 2340 BUT FOR 350 MM - 400 MM DIA. 610.58 JNT
2344 SAME AS ITEM NO. 2340 BUT FOR 450 MM - 600 MM DIA. 764.77 JNT
2345 SAME AS ITEM NO. 2340 BUT FOR 700 MM - 800 MM DIA. 918.96 JNT
2346 SAME AS ITEM NO. 2340 BUT FOR 900 MM - 1000 MM DIA. 1079.31 JNT
2347 DISMENTALLING OF CEMENT AND LEAD CAULKED JOINTS OF 200 MM
DIA.STEEL CYLINDER R.C.C. PIPES AND SPECIALS. 574.09 JNT
2348 SAME AS ITEM NO. 2347 BUT FOR 250 MM DIA. 696.14 JNT
2349 SAME AS ITEM NO. 2347 BUT FOR 300 MM DIA. 776.02 JNT
2350 SAME AS ITEM NO. 2347 BUT FOR 350 MM DIA. 960.95 JNT
2351 SAME AS ITEM NO. 2347 BUT FOR 400 MM DIA. 1009.59 JNT
2352 SAME AS ITEM NO. 2347 BUT FOR 450 MM DIA. 1263.74 JNT
2353 SAME AS ITEM NO. 2347 BUT FOR 500 MM DIA. 1450.91 JNT
2354 SAME AS ITEM NO. 2347 BUT FOR 600 MM DIA. 1708.88 JNT
2355 SAME AS ITEM NO. 2347 BUT FOR 700 MM DIA. 2132.82 JNT
2356 SAME AS ITEM NO. 2347 BUT FOR 900 MM DIA. 2839.61 JNT
2357 SAME AS ITEM NO. 2347 BUT FOR 1100 MM DIA. 3496.41 JNT
2358 SAME AS ITEM NO. 2347 BUT FOR 1200 MM DIA. 4037.36 JNT
2359 TAKING OUT 80 MM DIA. C.I. S & S PRESSURE PIPES ( SPUN CLASS 'LA' LEAD
& SPUN YARN JOINTED OR RUBBER RING GASKET TYTON JOINTED) 26.17 RM
2360 SAME AS ITEM NO. 2359 BUT FOR 100 MM DIA. 33.53 RM
2361 SAME AS ITEM NO. 2359 BUT FOR 125 MM DIA. 43.34 RM
2362 SAME AS ITEM NO. 2359 BUT FOR 150 MM DIA. 53.97 RM
2363 SAME AS ITEM NO. 2359 BUT FOR 200 MM DIA. 78.91 RM
2364 SAME AS ITEM NO. 2359 BUT FOR 250 MM DIA. 106.31 RM
2365 SAME AS ITEM NO. 2359 BUT FOR 300 MM DIA. 137.39 RM
2366
SAME AS ITEM NO. 2359 BUT C.I. FLANGED PIPES(CLASS 'A') 80 MM DIA. 29.85 RM
2367 SAME AS ITEM NO. 2366 BUT FOR 100 MM DIA. 37.62 RM
2368 SAME AS ITEM NO. 2366 BUT FOR 125 MM DIA. 48.66 RM
2369 SAME AS ITEM NO. 2366 BUT FOR 150 MM DIA. 60.92 RM
2370 SAME AS ITEM NO. 2366 BUT FOR 200 MM DIA. 88.32 RM
2371 SAME AS ITEM NO. 2366 BUT FOR 250 MM DIA. 117.76 RM
2372 SAME AS ITEM NO. 2366 BUT FOR 300 MM DIA. 152.51 RM
2373 SAME AS ITEM NO. 2359 BUT FOR STEEL CYLINDER R.C.C. (CLASS-III) 200 MM
DIA. 125.94 RM
2374 SAME AS ITEM NO. 2373 BUT FOR 250 MM DIA. 191.36 RM
2375 SAME AS ITEM NO. 2373 BUT FOR 300 MM DIA. 224.07 RM
2376 SAME AS ITEM NO. 2359 BUT C.I. S & S PRESSURE PIPES ( SPUN CLASS 'LA'
LEAD & SPUN YARN JOINTED OR RUBBER RING GASKET TYTON JOINTED) 350 178.40 RM
2377 SAME AS ITEM NO. 2376 BUT FOR 400 MM DIA. 216.77 RM
2378 SAME AS ITEM NO. 2376 BUT FOR 450 MM DIA. 261.48 RM
2379 SAME AS ITEM NO. 2376 BUT FOR 500 MM DIA. 306.60 RM
2380 SAME AS ITEM NO. 2376 BUT FOR 600 MM DIA. 408.24 RM
2381 SAME AS ITEM NO. 2376 BUT FOR 700 MM DIA. 527.17 RM
2382 SAME AS ITEM NO. 2376 BUT FOR 750 MM DIA. 590.43 RM
2383 SAME AS ITEM NO. 2376 BUT FOR C.I. FLANGED PIPE (VERTICALLY CAST
CLASS A) 350 MM DIA. 198.50 RM
2384 SAME AS ITEM NO. 2383 BUT FOR 400 MM DIA. 243.48 RM
2385 SAME AS ITEM NO. 2383 BUT FOR 450 MM DIA. 292.97 RM
2386 SAME AS ITEM NO. 2383 BUT FOR 500 MM DIA. 341.33 RM
 2387 SAME AS ITEM NO. 2383 BUT FOR 600 MM DIA. 456.60 RM
2388 SAME AS ITEM NO. 2383 BUT FOR 700 MM DIA. 592.68 RM
2389 SAME AS ITEM NO. 2383 BUT FOR 750 MM DIA. 666.91 RM
2390 SAME AS ITEM NO. 2376 BUT FOR STEEL CYLINDER REINFORCED PIPE( CLASS-
III) 350 MM DIA. 264.85 RM
2391 SAME AS ITEM NO. 2390 BUT FOR 400 MM DIA. 298.59 RM
2392 SAME AS ITEM NO. 2390 BUT FOR 450 MM DIA. 399.81 RM
2393 SAME AS ITEM NO. 2390 BUT FOR 500 MM DIA. 477.41 RM
2394 SAME AS ITEM NO. 2390 BUT FOR 600 MM DIA. 561.75 RM
2395 SAME AS ITEM NO. 2390 BUT FOR 700 MM DIA. 646.10 RM
2396 SAME AS ITEM NO. 2376 BUT FOR 800 MM DIA. 735.91 RM
2397 SAME AS ITEM NO. 2376 BUT FOR 900 MM DIA. 898.00 RM
2398 SAME AS ITEM NO. 2376 BUT FOR 1000 MM DIA. 1080.13 RM
2399 SAME AS ITEM NO. 2383 BUT FOR 800 MM DIA. 778.22 RM
2400 SAME AS ITEM NO. 2383 BUT FOR 900 MM DIA. 944.64 RM
2401 SAME AS ITEM NO. 2383 BUT FOR 1000 MM DIA. 1142.71 RM
2402 SAME AS ITEM NO. 2390 BUT FOR 900 MM DIA. 856.16 RM
2403 SAME AS ITEM NO. 2376 BUT FOR 1100 MM DIA. 1347.67 RM
2404 SAME AS ITEM NO. 2376 BUT FOR 1200 MM DIA. 1570.92 RM
2405 SAME AS ITEM NO. 2390 BUT FOR 900 MM DIA. 1300.12 RM
2406 SAME AS ITEM NO. 2390 BUT FOR 900 MM DIA. 1671.58 RM
2407 DISMENTALLING OF SPECIAL RUBBER GASKET TYTON JOINTS OF C.I. S & S ALL
CLASSES OF PIPES, SPECIALS & FITTINGS 80 MM - 100 MMDIA. 36.21 JNT
2408 SAME AS ITEM NO. 2407 BUT FOR 125 MM - 150 MM DIA. 55.62 JNT
2409 SAME AS ITEM NO. 2407 BUT FOR 200 MM DIA. 68.59 JNT
2410 SAME AS ITEM NO. 2407 BUT FOR 250 MM DIA. 80.20 JNT
2411 SAME AS ITEM NO. 2407 BUT FOR 300 MM DIA. 96.97 JNT
2412 SAME AS ITEM NO. 2407 BUT FOR 350 MM DIA. 118.13 JNT
2413 SAME AS ITEM NO. 2407 BUT FOR 400 MM DIA. 139.12 JNT
2414 SAME AS ITEM NO. 2407 BUT FOR 450 MM DIA. 152.01 JNT
2415 SAME AS ITEM NO. 2407 BUT FOR 500 MM DIA. 176.19 JNT
2416 SAME AS ITEM NO. 2407 BUT FOR 600 MM DIA. 195.69 JNT
2417 SAME AS ITEM NO. 2407 BUT FOR 700 MM DIA. 217.29 JNT
2418 SAME AS ITEM NO. 2407 BUT FOR 750 MM DIA. 236.27 JNT
2419 DISMENTALLING OF C.I. DETACHABLE JOINTS OF A.C. PRESSURE MAIN OF 50
MM - 100 MM DIA. 36.21 JNT
2420 SAME AS ITEM NO. 2419 BUT FOR 125 MM - 150 MM DIA. 55.62 JNT
2421 SAME AS ITEM NO. 2419 BUT FOR 200 MM DIA. 68.59 JNT
2422 SAME AS ITEM NO. 2419 BUT FOR 250 MM DIA. 80.20 JNT
2423 SAME AS ITEM NO. 2419 BUT FOR 300 MM DIA. 96.97 JNT
2424 DISMENTALLING OF C.I. M.H. COVER WITH FRAMES 455 MM - 610
MMCLEAR SIZE. 1154.73 NO.
2425 DISMENTALLING OF C.I. SURFACE BOX 200 MM - 350 MM SIZE. 396.94 NO.
2426 SAME AS ITEM NO. 2425 BUT UPTO 150 MM SIZE. 202.08 NO.
2427 DISMENTALLING SCREWED TYPE AIR VALVE 599.94 NO.
5.MISCELLANEOUS ITEMS:
2428 MAKING FERRULE CONNECTION WITH 10 MM OR 15 MM SIZE FERRULE IN
EXISTING A.C.MAINS OF 50 MM - 300 MM DIA. 954.39 CONN.
2429 INSERTING & FIXING WATER METER OR FITTING SUCH AS STOP COCKS,
WHEEL VALVE ETC. UPTO 25 MM DIA. IN EXISTING M.S. GALVANIZED PIPES. 666.62 CONN.
2430 SAME AS ITEM NO. 2429 BUT 32 MM - 40 MM DIA. 978.66 CONN.
 2431 SAME AS ITEM NO. 2429 BUT 50 MM - 80 MM DIA. 1360.46 CONN.
2432 SAME AS ITEM NO. 2429 BUT 100 MM - 150 MM DIA. 2448.82 CONN.
2433 MAKING BRASS FERRULE CONNECTION WITH 10 MM OR 15 MM SIZE
FERRULE IN EXISTING C.I. OR M.S. GALVANIZED MAINS OF 50 MM OR 816.27 CONN.
2434 SAME AS ITEM NO. 2433 BUT 20 MM -25 MM SIZE FERRULE 1155.36 CONN.
2435 SAME AS ITEM NO. 2433 BUT 32 MM -50 MM SIZE FERRULE 1496.50 CONN.
2436 CARTING & PLACING OF C.I. M.H. COVER HEAVY DUTY 500 MM - 560 MM
CLEAR OPENING SIZE. 970.57 NO.
2437
SAME AS ITEM NO. 2436 BUT FOR MEDIUM DUTY 610 MM X 445 MM SIZE 658.12 NO.
2438 SAME AS ITEM NO. 2436 BUT FOR LIGHT DUTY RECTANGULAR. 407.57 NO.
2439 SAME AS ITEM NO. 2436 BUT FOR MEDIUM DUTY OR LIGHT DUTY 250 MM X
455 MM STANDARD SIZE. 344.44 NO.
2440
CARTING & FIXING OF C.I. OR M.S. SURFACE BOX UPTO 200 MM DIA. 257.68 NO.
2441
MAKING I.S.S. THREADS IN 15 MM - 25 MM DIA GALVANIZED M.S. PIPES. 37.26 END
2442 SAME AS ITEM NO. 2441 BUT 32 MM - 50 MM DIA. 62.73 END
2443 SAME AS ITEM NO. 2441 BUT 65 MM - 80 MM DIA. 99.99 END
2444 SAME AS ITEM NO. 2441 BUT 10 MM - 150 MM DIA. 195.98 END
2445 CARTAGE AND FIXING OF SLUICE VALVE OR REFLUX VALVE 50 MM - 125 MM
DIA. 443.33 NO.
2446 SAME AS ITEM NO. 2445 BUT 150 MM -200 MM DIA. 721.04 NO.
2447 SAME AS ITEM NO. 2445 BUT 250 MM -300 MM DIA. 1394.88 NO.
2448 SAME AS ITEM NO. 2445 BUT 350 MM -400 MM DIA. 1908.79 NO.
2449 SAME AS ITEM NO. 2445 BUT 450 MM -600 MM DIA. 2716.35 NO.
2450 CARTAGE AND FIXING OF SCREWED DOWN AIR VALVE OF 20 MM - 25 MM
DIA IN C.I. MAINS. 748.25 NO.
2451 SAME AS ITEM NO. 2450 BUT 65 MM -80 MM DIA. FLANGED AIR VALVE OR
FIRE HYDRANT OVER EXISTING FLANGED TEE. 392.96 RM

6. INDIA MARK-II HAND PUMP WORKS:

2452 BORING OF 150 MM DIA. BY CASING METHOD 0-30 M DEEP INCLUDING
EXTRACTION OF CASING PIPE. 799.62 RM
2453 SAME AS ITEM NO. 2452 BUT 31-60 M DEEP. 882.27 RM
2454 INSTALLATION OF 32 MM DIA G.I. PIPE HAND PUMP ASSEMBLY AND
DEVELOPMENT OF BORE. 2986.37 NO.
2455
FILLING COARSE SAND ROUND THE BORE EXCLUDING THE COST OF SAND. 298.64 CUM
Letter no.912/Gramin-1/hand pump dated 03-10-2001 ref.764/765/766 (E/R) dt. 27-08-2001
Analysis of rates for H.P. wide letter no. 1296/PPRD/HP/50 dated 30-09-99(skeltan) MD U P Jal
Nigam,LKO
2456 Transportation of H.P.material, T & P etc.to site of loading, unloading
complete 1561.62 PER H.P.
2457 Hiring charges of necessary T & P and casing equipments, cutter,
wire,ropeclam, wooden planks etc. such as loading unloading 1460.87 PER H.P.
2458-A
CONSTRUCTION OF BORING 150 MM DIA BY CASING METHOD (0-15)M 678.00 PER M
2458-B
CONSTRUCTION OF BORING 150 MM DIA BY CASING METHOD (15-30)M 744.52 PER M
2458-C
CONSTRUCTION OF BORING 150 MM DIA BY CASING METHOD (30-45)M 893.42 PER M
 2459-a CONSTRUCTION OF BORING 150 MM DIA BY PALM & PRESSURE METHOD (0-
15)M 605.57 PER M
2459-b
CONSTRUCTION OF BORING 150 MM DIA BY CASING METHOD (15-30)M 681.27 PER M
2459-c
CONSTRUCTION OF BORING 150 MM DIA BY CASING METHOD (30-45)M 832.66 PER M
2459-d
CONSTRUCTION OF BORING 150 MM DIA BY CASING METHOD (45-60)M 1059.75 PER M
2460 Provide necessary T & P its Cartage to the site of work, lowering the P.V.C.
pipe110 mm dia in 150 mm dia bore hole complete 21.80 PER M
2461 Extraction of casing pipe 150 mm. dia after completion of lowering of pipe
assembly including all labour, T & P etc. complete. 76.44 PER M
2462 Shrouding of packing graded coarse sand between the bore hole and the
strainer upto from the bottom of the strainer including supply of the coarse
sand, labour, T & P etc. complete. 565.54 PER H.P.
2463 Installation of India Mark-II hand pump over the bore hole as per instruction
of the Engineer in charge or his agent excluding components but including all
labour, T & P etc. complete. 1406.08 PER H.P.
2464 Development of bore over pumping and back washing till the discharge is
free from turbidity after 20 minutes of starting the pump including hiring
charge of equipments , labour T & P etc. complete. 953.15 PER H.P.
2465 Disinfection of hand pump using powdered chlorine including through
cleaning of all parts of hand pump. 125.05 PER H.P.
7. BORING WORK FOR RECHARGING UNITS:
2466 Transportation of H.P.material, T & P etc.to site of loading, unloading
complete 1561.62 PER H.P.
2467 Hiring charges of necessary T & P and casing equipments, cutter,
wire,ropeclam, wooden planks etc. such as loading unloading
arrangements required for proper completion of work. 1460.87 PER H.P.
2468(A) Construction of 300 mm dia boring in alluvioul soil by casing method. (0-
15)m 931.70 PER M
2468(B) Construction of 300 mm dia boring in alluvioul soil by casing method. (15-
30)m 1048.13 PER M
2469 Provide necessary T & P its Cartage to the site of work, lowering the P.V.C.
pipe 200 mm dia in 300 mm dia bore hole complete 34.70 PER M
2470 Extraction of casing pipe 300 mm. dia after completion of lowering of pipe
assembly including all labour, T & P etc. complete. 96.24 PER M
2471 Shrouding of packing graded coarse sand between the bore hole and the
strainer upto from the bottom of the strainer including supply of the coarse
sand, labour, T & P etc. complete. 1078.83 PER M
 OFFICE OF THE EXECUTIVE ENGINEER, IST. C.D. U.P. JAL NIGAM, GHAZIABAD
SCHEDULE OF RATES FOR THE YEAR 2020-21 (FOR CONSTRUCTION WORKS)
DISTT. GHAZIABAD/MEERUT/BULANDSHAHR/GAUTAM BUDDH NAGAR/BAGHPAT/HAPUR
S O R INCL. OF ALL TAXES VIDE C E (R), LUCKNOW LETTER NO.1195/2042-0024 STA/18 DATED 03.08.2018
Labour & Material rates sanctioned by S.E. 18th Circle, Gzb vide letter no. 257/vividh -13/30 dt. 02-06-2020
CODE DESCRIPTION RATE IN RS. UNIT
1 2 3 4
( C) SEWERAGE AND DRAINAGE WORK :
1. TRENCHING WORK:-
3001 EXCAVATION FOR SEWER LINE 0-1.50 M DEEP IN ORDINARY SOIL 257.13 CUM
3002 EXCAVATION FOR SEWER LINE 1.50-3.00 M DEEP IN ORDINARY SOIL 323.18 CUM
3003 EXCAVATION FOR SEWER LINE 3.00-4.50 M DEEP IN ORDINARY SOIL 406.58 CUM
3004 EXCAVATION FOR SEWER LINE 4.50-6.00 M DEEP IN ORDINARY SOIL 477.12 CUM
3005 EXCAVATION FOR SEWER LINE 6.00-7.50 M DEEP IN ORDINARY SOIL 623.12 CUM
3006 EXCAVATION FOR SEWER LINE 7.50-9.00 M DEEP IN ORDINARY SOIL 819.66 CUM
3007 EXCAVATION FOR SEWER LINE 0-1.50 M DEEP IN SOIL MIXED WITH MOORAM,
SHINGLE KANKAT ETC.(EXTRA OVER ITEM NO. 3001) 38.01 CUM
3008 EXCAVATION FOR SEWER LINE 1.50-3.00 M DEEP IN SOIL MIXED WITH
MOORAM, SHINGLE KANKAT ETC.(EXTRA OVER ITEM NO. 3002) 62.22 CUM
3009 EXCAVATION FOR SEWER LINE 3.00-4.50 M DEEP IN SOIL MIXED WITH
MOORAM, SHINGLE KANKAT ETC.(EXTRA OVER ITEM NO. 3003) 87.02 CUM
3010 EXCAVATION FOR SEWER LINE 4.50-6.00 M DEEP IN SOIL MIXED WITH
MOORAM, SHINGLE KANKAT ETC.(EXTRA OVER ITEM NO. 3004) 111.04 CUM
3011 EXCAVATION FOR SEWER LINE 6.00-7.50 M DEEP IN SOIL MIXED WITH
MOORAM, SHINGLE KANKAT ETC.(EXTRA OVER ITEM NO. 3005) 135.10 CUM
3012 EXCAVATION FOR SEWER LINE 7.50-9.00 M DEEP IN SOIL MIXED WITH
MOORAM, SHINGLE KANKAT ETC.(EXTRA OVER ITEM NO. 3006) 167.22 CUM
3013
EXCAVATION FOR SEWER LINE 0.0-1.5 M DEEP IN HARD ROCK BY CHISELLING
1484.23 CUM
3014 EXCAVATION FOR SEWER LINE 1.50-3.00 M DEEP IN HARD ROCK BY
CHISELLING 1606.50 CUM
3015 EXCAVATION FOR SEWER LINE 3.00-4.50 M DEEP IN HARD ROCK BY
CHISELLING 1763.25 CUM
3016 EXCAVATION FOR SEWER LINE 4.50-6.00 M DEEP IN HARD ROCK BY
CHISELLING 1944.69 CUM
3017 EXCAVATION FOR SEWER LINE 6.00-7.50 M DEEP IN HARD ROCK BY
CHISELLING 2200.49 CUM
3018 EXCAVATION FOR SEWER LINE 7.50-9.00 M DEEP IN HARD ROCK BY
2470.86 CUM
CHISELLING
3019 EXCAVATION FOR SEWER LINE 0.0-1.5 M DEEP IN MEDIUM ROCK BY
CHISELLING OR MILD BLASTING 1213.77 CUM
3020 EXCAVATION FOR SEWER LINE 1.50-3.00 M DEEP IN MEDIUM ROCK BY
CHISELLING OR MILD BLASTING 1314.39 CUM
3021 EXCAVATION FOR SEWER LINE 3.00-4.50 M DEEP IN MEDIUM ROCK BY
CHISELLING OR MILD BLASTING 1443.90 CUM
3022 EXCAVATION FOR SEWER LINE 4.50-6.00 M DEEP IN MEDIUM ROCK BY
CHISELLING OR MILD BLASTING 1593.85 CUM
3023 EXCAVATION FOR SEWER LINE 6.00-7.50 M DEEP IN MEDIUM ROCK BY
CHISELLING OR MILD BLASTING 1737.99 CUM
3024 EXCAVATION FOR SEWER LINE 7.50-9.00 M DEEP IN MEDIUM ROCK BY
CHISELLING OR MILD BLASTING 1937.00 CUM
3025 EXCAVATION FOR SEWER LINE 0.00-3.00 M DEEP IN DECOMPOSED OR SOFT
ROCK BY CHISELLING OR MILD BLASTING 1109.46 CUM
3026 EXCAVATION FOR SEWER LINE 1.50-3.00 M DEEP IN DECOMPOSED OR SOFT
ROCK BY CHISELLING OR MILD BLASTING 1273.88 CUM
 3027 EXCAVATION FOR SEWER LINE 3.00-4.50 M DEEP IN DECOMPOSED OR SOFT
ROCK BY CHISELLING OR MILD BLASTING 1460.38 CUM
3028 EXCAVATION FOR SEWER LINE 4.50-6.00 M DEEP IN DECOMPOSED OR SOFT
ROCK BY CHISELLING OR MILD BLASTING 1690.69 CUM
3029 EXCAVATION FOR SEWER LINE 6.00-7.50 M DEEP IN DECOMPOSED OR SOFT
ROCK BY CHISELLING OR MILD BLASTING 2048.01 CUM
3030 EXCAVATION FOR SEWER LINE 7.50-9.00 M DEEP IN DECOMPOSED OR SOFT
ROCK BY CHISELLING OR MILD BLASTING 2523.02 CUM
3031 BAILING OUT OR PUMPING OUT OF SUB SOIL WATER(ADD EXTRA ON 3001 TO
3030) 117.50 CUM
2. SHUTTERING WORK:-
3032 CLOSE TIMBERING IN TRENCHES 0.00 - 3.00 M 919.24 SQM
3033 CLOSE TIMBERING IN TRENCHES 3.00 - 6.00 M 1170.20 SQM
3034 CLOSE TIMBERING IN TRENCHES 6.00 - 9.00 M 1314.21 SQM
3035
CLOSE TIMBERING LEFT IN TRENCHES(UNUSED TIMBERING) 0.00 - 3.00 M
5309.93 SQM
3036
CLOSE TIMBERING LEFT IN TRENCHES(UNUSED TIMBERING) 3.00 - 6.00 M
6557.65 SQM
3037
CLOSE TIMBERING LEFT IN TRENCHES(UNUSED TIMBERING) 6.00 - 9.00 M
7100.50 SQM
3038
CLOSE TIMBERING LEFT IN TRENCHES(UNUSED TIMBERING) 0.00 - 3.00 M
2179.89 SQM
3039
CLOSE TIMBERING LEFT IN TRENCHES(UNUSED TIMBERING) 3.00 - 6.00 M
2706.73 SQM
3040
CLOSE TIMBERING LEFT IN TRENCHES(UNUSED TIMBERING) 6.00 - 9.00 M
2952.44 SQM
3041
OPEN TIMBERING IN TRENCHES 0.00 - 3.00 M
514.07 SQM
3042
OPEN TIMBERING IN TRENCHES 3.00 - 6.00 M
652.36 SQM
3043
OPEN TIMBERING IN TRENCHES 6.00 - 9.00 M
780.21 SQM
3044
OPEN TIMBERING LEFT IN TRENCHES(UNUSED TIMBERING) 0.00 - 3.00 M
2773.83 SQM
3045
OPEN TIMBERING LEFT IN TRENCHES(UNUSED TIMBERING) 3.00 - 6.00 M
3358.17 SQM
3046
OPEN TIMBERING LEFT IN TRENCHES(UNUSED TIMBERING) 6.00 - 9.00 M
3889.12 SQM
3047
OPEN TIMBERING LEFT IN TRENCHES(UNUSED TIMBERING) 0.00 - 3.00 M
1152.90 SQM
3048
OPEN TIMBERING LEFT IN TRENCHES(UNUSED TIMBERING) 3.00 - 6.00 M
1408.57 SQM
3049
OPEN TIMBERING LEFT IN TRENCHES(UNUSED TIMBERING) 6.00 - 9.00 M
1642.38 SQM
3050 SHEET PILING IN TRENCHES 0.00- 3.00 M DEEP(SCRAP VALUE OF SHEET &
ANGLE IRON SALVAGE VALUE OR TIMBER VALUE WILL BE DEDUCTED) 2665.08 SQM
3051 SHEET PILING IN TRENCHES 3.00- 6.00 M DEEP(SCRAP VALUE OF SHEET &
ANGLE IRON SALVAGE VALUE OR TIMBER VALUE WILL BE DEDUCTED) 3538.24 SQM
3052 SHEET PILING IN TRENCHES 6.00- 9.00 M DEEP(SCRAP VALUE OF SHEET &
ANGLE IRON SALVAGE VALUE OR TIMBER VALUE WILL BE DEDUCTED) 4681.72 SQM
3. LAYING, JOINTING OF SEWERS:-
3053
LAYING JOINTING OF 100 MM DIA S.W.GLAZED PIPE 0.00- 1.50 M DEEP
367.03 RM
3054
LAYING JOINTING OF 150 MM DIA S.W.GLAZED PIPE 0.00- 1.50 M DEEP
507.27 RM
3055
LAYING JOINTING OF 200 MM DIA S.W.GLAZED PIPE 0.00- 1.50 M DEEP
604.89 RM
3056
LAYING JOINTING OF 250 MM DIA S.W.GLAZED PIPE 0.00- 1.50 M DEEP
736.11 RM
3057
LAYING JOINTING OF 300 MM DIA S.W.GLAZED PIPE 0.00- 1.50 M DEEP
920.94 RM
3058
LAYING JOINTING OF 350 MM DIA S.W.GLAZED PIPE 0.00- 1.50 M DEEP
1053.44 RM
3059
LAYING JOINTING OF 400 MM DIA S.W.GLAZED PIPE 0.00- 1.50 M DEEP
1186.98 RM
3060 LAYING JOINTING OF 200 MM DIA 75 CM LONG S.W.GLAZED PIPE 0.00- 1.50
M DEEP 509.01 RM
3061 LAYING JOINTING OF 250 MM DIA 75 CM LONG S.W.GLAZED PIPE 0.00- 1.50
M DEEP 618.55 RM
3062 LAYING JOINTING OF 300 MM DIA 75 CM LONG S.W.GLAZED PIPE 0.00- 1.50
M DEEP 762.69 RM
3063 LAYING JOINTING OF S.W.GLAZED PIPE 1.50- 3.00 M DEEP(EXTRA OVER ITEM
3053 TO 3062) 7.31 %
3064 LAYING JOINTING OF S.W.GLAZED PIPE 3.00- 4.500 M DEEP(EXTRA OVER ITEM
3053 TO 3062) 16.42 %
3065 LAYING JOINTING OF S.W.GLAZED PIPE 4.50- 6.00 M DEEP(EXTRA OVER ITEM
3053 TO 3062) 26.87 %
3066 LAYING JOINTING OF S.W.GLAZED PIPE 6.00- 7.500 M DEEP(EXTRA OVER ITEM
3053 TO 3062) 38.06 %
3067 LAYING JOINTING OF S.W.GLAZED PIPE 7.50- 9.00 M DEEP(EXTRA OVER ITEM
3053 TO 3062) 51.36 %
3068 LAYING JOINTING OF 100 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 277.32 RM
3069 LAYING JOINTING OF 150 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 349.42 RM
3070 LAYING JOINTING OF 250 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 472.27 RM
3071 LAYING JOINTING OF 300 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 581.50 RM
3072 LAYING JOINTING OF 350 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 696.83 RM
3073 LAYING JOINTING OF 400 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 763.59 RM
3074 LAYING JOINTING OF 450 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 910.56 RM
3075 LAYING JOINTING OF 500 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 1022.01 RM
3076 LAYING JOINTING OF 600 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 1179.95 RM
3077 LAYING JOINTING OF 700 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 1325.53 RM
3078 LAYING JOINTING OF 800 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 1976.76 RM
3079 LAYING JOINTING OF 900 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 2266.96 RM
3080 LAYING JOINTING OF 1000 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 2596.05 RM
3081 LAYING JOINTING OF 1100 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 3030.45 RM
3082 LAYING JOINTING OF 1200 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 3489.85 RM
3083 LAYING JOINTING OF 1400 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 4370.83 RM
3084 LAYING JOINTING OF 1600 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 5388.34 RM
3085 LAYING JOINTING OF 1800 MM DIA R.C.C.NP2 PIPE 0.00- 1.50 M DEEP 6675.59 RM
3086 LAYING JOINTING OF R.C.C.NP2 PIPE 1.50- 3.00 M DEEP(EXTRA OVER ITEM
(3068 TO 3085) 7.02 %
3087 LAYING JOINTING OF R.C.C.NP2 PIPE 3.00- 4.50 M DEEP(EXTRA OVER ITEM
(3068 TO 3085) 14.19 %
3088 LAYING JOINTING OF R.C.C.NP2 PIPE 4.50- 6.00 M DEEP(EXTRA OVER ITEM
(3068 TO 3085) 22.67 %
3089 LAYING JOINTING OF R.C.C.NP2 PIPE 6.00- 7.50 M DEEP(EXTRA OVER ITEM
(3068 TO 3085) 34.70 %
3090 LAYING JOINTING OF R.C.C.NP2 PIPE 7.50- 9.00 M DEEP(EXTRA OVER ITEM
(3068 TO 3085) 50.90 %
3091
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 100 MM DIA HUME PIPE 153.64 EACH
 3092
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 150 MM DIA HUME PIPE 236.02 EACH
3093
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 250 MM DIA HUME PIPE 365.70 EACH
3094
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 300 MM DIA HUME PIPE 535.03 EACH
3095
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 350 MM DIA HUME PIPE 578.08 EACH
3096
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 400 MM DIA HUME PIPE 672.62 EACH
3097
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 450 MM DIA HUME PIPE 746.67 EACH
3098
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 500 MM DIA HUME PIPE 965.03 EACH
3099
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 600 MM DIA HUME PIPE 1144.98 EACH
3100
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 700 MM DIA HUME PIPE 1297.06 EACH
3101
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 800 MM DIA HUME PIPE 1920.78 EACH
3102
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 900 MM DIA HUME PIPE 2356.58 EACH
3103
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 1000 MM DIA HUME PIPE 2827.06 EACH
3104
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 1100 MM DIA HUME PIPE 3689.34 EACH
3105
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 1200 MM DIA HUME PIPE 4523.33 EACH
3106
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 1400 MM DIA HUME PIPE 5342.79 EACH
3107
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 1600 MM DIA HUME PIPE 6221.94 EACH
3108
PRECAST CEMENT CONCRETE(1:3:6)SADDLE FOR 1800 MM DIA HUME PIPE 7139.89 EACH

4. DISMENTALLING OF SEWERS:-
3109 DISMENTALLING 100 MM DIA OLD S.W. PIPE SEWERS 79.59 RM
3110 DISMENTALLING 150 MM DIA OLD S.W. PIPE SEWERS 108.16 RM
3111 DISMENTALLING 200 MM DIA OLD S.W. PIPE SEWERS 148.69 RM
3112 DISMENTALLING 250 MM DIA OLD S.W. PIPE SEWERS 190.80 RM
3113 DISMENTALLING 300 MM DIA OLD S.W. PIPE SEWERS 221.92 RM
3114 DISMENTALLING 400 MM DIA OLD S.W. PIPE SEWERS 285.70 RM
3115 DISMENTALLING 100 MM DIA R.C.C.HUME NP2 PIPE SEWERS 89.28 RM
3116 DISMENTALLING 150 MM DIA R.C.C.HUME NP2 PIPE SEWERS 133.92 RM
3117 DISMENTALLING 250 MM DIA R.C.C.HUME NP2 PIPE SEWERS 223.20 RM
3118 DISMENTALLING 300 MM DIA R.C.C.HUME NP2 PIPE SEWERS 267.84 RM
3119 DISMENTALLING 400 MM DIA R.C.C.HUME NP2 PIPE SEWERS 306.00 RM
3120 DISMENTALLING 450 MM DIA R.C.C.HUME NP2 PIPE SEWERS 344.25 RM
3121 DISMENTALLING 500 MM DIA R.C.C.HUME NP2 PIPE SEWERS 382.50 RM
3122 DISMENTALLING 600 MM DIA R.C.C.HUME NP2 PIPE SEWERS 459.00 RM
3123 DISMENTALLING 700 MM DIA R.C.C.HUME NP2 PIPE SEWERS 918.01 RM
3124 DISMENTALLING 800 MM DIA R.C.C.HUME NP2 PIPE SEWERS 1049.15 RM
 3125 DISMENTALLING 900 MM DIA R.C.C.HUME NP2 PIPE SEWERS 1180.30 RM
3126 DISMENTALLING 1000 MM DIA R.C.C.HUME NP2 PIPE SEWERS 1147.51 RM
3127 DISMENTALLING 1100 MM DIA R.C.C.HUME NP2 PIPE SEWERS 1262.26 RM
3128 DISMENTALLING 1200 MM DIA R.C.C.HUME NP2 PIPE SEWERS 1377.01 RM
5.SANITARY FITTINGS:-
3129
FIXING INDIAN TYPE WHITE GLAZED EARTHEN WARE W.CLOSET & FOOT REST 1567.00 EACH
3130 FIXING EUROPEAN TYPE WHITE GLAZED EARTHEN WARE W.CLOSET & FOOT
REST 1340.00 EACH
3131 FIXING OF 15 LTR. C.I. FLUSHING CISTERN 2775.70 EACH
3132 FIXING OF 10 LTR. C.I. FLUSHING CISTERN 2564.20 EACH
3133 FIXING OF 5 LTR. C.I. FLUSHING CISTERN 2279.90 EACH
3134 FIXING OF LOW LEVEL FLUSHING CISTERN 1721.20 EACH
3135 FIXING WHITE GLAZED EARTHENWARE URINALS & WASTE PIPE 1227.50 EACH
3136
FIXING INDIAN TYPE URINAL SQUATTING OF WHITE GLAZED FIRE CLAY 2979.20 EACH
3137
FIXING 400X400 MM SIZE WASH BASIN OF WHITE GLAZED EARTHENWARE 925.30 EACH
3138
FIXING 450X300 MM SIZE WASH BASIN OF WHITE GLAZED EARTHENWARE 1142.90 EACH
3139 FIXING 600X480 MM OR 630X450 MM SIZE WASH BASIN OF WHITE GLAZED
EARTHENWARE 1334.60 EACH
3140 FIXING 600X400X150 MM OR 600X400X200 MM OR 600X450X250 MM OR
750X450X250 MM SIZE SINK 1226.69 EACH
3141 FIXING 400X250X150 MM OR 450X300X150 MM OR 500X350X150 MM SIZE
SINK 995.37 EACH
3142 FIXING TEAKWOOD, PLASTIC OR ANY OTHER TYPE OF SEAT IN EUROPEAN
TYPE WATER CLOSET 303.40 EACH
3143 MAKING 15 MM DIA LEAD CONNECTION 154.40 EACH
3144 FIXING G.I. CHAIN WITH G.I. PLUG 56.15 EACH
3145
FIXING BRASS CHAIN AND RUBBER PLUG FOR SINK OR LAVORATORY BASIN 56.15 EACH
3146 FIXING 750X450X40 MM THICK WOOD DRAINING BOARD WITH SKIRTING AND
HEADING 268.55 EACH
3147 FIXING 550X450 MM OR 450X300 MM SIZE BEVELLED ON PLAIN EDGE
MIRROR 865.55 EACH
3148
FIXING GLASS SHELF WITH C.P. BRASS BRACKETS AND GUARD RAIL 440.75 EACH
3149
FIXING 750X00 MM OR 600X20 MM OR 450X20 MM SIZE BRASS TOWEL RAIL 384.10 EACH
3150 FIXING C.P. BRASS WOODEN OR GLAZED OR VITROUS CHINA "TOILET PAPER
HOLDER" 399.15 EACH
3151 FIXING 80 MM DIA. H.C.I. SOIL OR VENT PIPE AND SPECIALS 315.84 RM
3152 FIXING 100 MM DIA. H.C.I. SOIL OR VENT PIPE AND SPECIALS 394.01 RM
3153 FIXING 150 MM DIA. H.C.I. SOIL OR VENT PIPE AND SPECIALS 527.66 RM
3154 MAKING LEAD JOINTS OF 80 MM DIA H.C.I. PIPES AND SPECIALS 411.76 RM
3155 MAKING LEAD JOINTS OF 100 MM DIA H.C.I. PIPES AND SPECIALS 552.31 RM
3156 MAKING LEAD JOINTS OF 150 MM DIA H.C.I. PIPES AND SPECIALS 814.75 RM
3157 FIXING OF 50 MM DIA A.C. SOIL OR VENT PIPE WITH SPECIALS 259.96 RM
3158 FIXING OF 80 MM DIA A.C. SOIL OR VENT PIPE WITH SPECIALS 321.56 RM
3159 FIXING OF 100 MM DIA A.C. SOIL OR VENT PIPE WITH SPECIALS 379.31 RM
 3160 MAKING 1:1 CEMENT AND COARSE SAND JOINT OF 50 MM DIA A.C. SOIL OR
VENT PIPE WITH SPECIALS 174.90 JNT
3161 MAKING 1:1 CEMENT AND COARSE SAND JOINT OF 80 MM DIA A.C. SOIL OR
VENT PIPE WITH SPECIALS 246.71 JNT
3162 MAKING 1:1 CEMENT AND COARSE SAND JOINT OF 100 MM DIA A.C. SOIL OR
VENT PIPE WITH SPECIALS 320.53 JNT

6. SINKING OF WELL:-
3163 SINKING OF WELL 2.50 M DIA (EXTERNAL) IN ORDINARY SOIL 0.0 - 1.50 M
DEEP 8434.73 RM
3164 SINKING OF WELL 2.50 M DIA (EXTERNAL) IN ORDINARY SOIL 1.50 - 3.0 M
DEEP 12086.34 RM
3165 SINKING OF WELL 2.50 M DIA (EXTERNAL) IN ORDINARY SOIL 3.0 - 6.00 M
DEEP 15755.11 RM
3166 SINKING OF WELL 2.50 M DIA (EXTERNAL) IN ORDINARY SOIL 6.0 - 9.00 M
DEEP 23315.50 RM
3167 SINKING OF WELL 2.50 M DIA (EXTERNAL) IN ORDINARY SOIL 9.0 - 12.0 M
DEEP 29830.13 RM
3168 SINKING OF WELL 2.50 M DIA (EXTERNAL) IN ORDINARY SOIL 12.0-15.0 M
DEEP 39430.63 RM
3169 SAME AS ITEM NO. 3163 TO 3168 BUT FOR OTHER DIAMETERS (THE RATES PROPORT.
SHALL BE PROPORTIONAL TO THEIR AREAS) TO AREAS RM
3170 SAME AS ITEM NO. 3163 TO 3168 BUT FOR SOFT CLAY (EXTRA OVER ITEMS
3163 TO 3169) 25 % RM
3171 SAME AS ITEM NO. 3163 TO 3168 BUT FOR HARD CLAY (EXTRA OVER ITEMS
3163 TO 3169) 50 % RM
3172 SAME AS ITEM NO. 3163 TO 3168 BUT FOR KANKAR, SHINGLES AND
DECOMPOSED ROCK (EXTRA OVER ITEMS 3163 TO 3169) 75 % RM

7. MISCELLANEOUS ITEMS:-
3173 KERB & CHANNEL (K&C) DRAINS (ORDINARY) NO. I 472.79 RM
3174 KERB & CHANNEL (K&C) DRAINS (ORDINARY) NO. II 553.30 RM
3175 KERB & CHANNEL (K&C) DRAINS (ORDINARY) NO. III 622.59 RM
3176 KERB & CHANNEL (K&C) DRAINS (ORDINARY) NO. IV 794.45 RM
3177 100 MM DIA C.C. SEMI CIRCULAR DRAIN 1053.58 RM
3178 150 MM DIA C.C. SEMI CIRCULAR DRAIN 1187.28 RM
3179 250 MM DIA C.C. SEMI CIRCULAR DRAIN 1456.64 RM
3180 300 MM DIA C.C. SEMI CIRCULAR DRAIN 1589.85 RM
3181 400 MM DIA C.C. SEMI CIRCULAR DRAIN 1860.32 RM
3182 450 MM DIA C.C. SEMI CIRCULAR DRAIN 2224.36 RM
3183 DISMENTALLING AND MAKING CONNECTION OF 100 & 150 MM DIA DRAIN EACH
PIPE WITH C.C. 1:2:4 573.61 CONNECTIO
EACH
3184 DISMENTALLING AND MAKING CONNECTION OF 200, 250 & 300 MM DIA CONNECTIO
DRAIN PIPE WITH C.C. 1:2:5 946.36 N
EACH
3185 DISMENTALLING AND MAKING CONNECTION OF 350, 400 & 450 MM DIA CONNECTIO
DRAIN PIPE WITH C.C. 1:2:6 1472.48 N
3186
FIXING R.C.C. SPUN VENTILATING COLUMN 9.00 M LONG 10673.00 EACH
3187
FIXING C.I. FOOT STEPS IN THE WALL 499.00 EACH
3188
FIXING 375X175X40 MM (SECTION) R.C.C.FOOT STEPS WITH 16 MM DIA BAR 415.80 EACH
3189 Extra over items of concrete, brick work, plaster, flooring, demolition

and dismentalling work if executed below 1.50 To 3.00 m from G.L. 3% EACH
3190 Extra over items of concrete, brick work, plaster, flooring, demolition

and dismentalling work if executed below 3.0 to 4.50 m from G.L. 7% EACH
3191 Extra over items of concrete, brick work, plaster, flooring, demolition

and dismentalling work if executed below 4.50 to 6.00 m from G.L. 12 % EACH
3192 Extra over items of concrete, brick work, plaster, flooring, demolition

and dismentalling work if executed below 6.00 to 7.50 m from G.L. 20 % EACH
3193 Extra over items of concrete, brick work, plaster, flooring, demolition

and dismentalling work if executed below 7.50 to 9.00m from G.L. 30 % EACH
3194
LAYING, JOINTING 350 MM DIA R.C.C. NP3 HUME PIPE 0.0-1.50 M DEEP 1195.77 RM
3195
LAYING, JOINTING 400 MM DIA R.C.C. NP3 HUME PIPE 0.0-1.50 M DEEP 1310.33 RM
3196
LAYING, JOINTING 450 MM DIA R.C.C. NP3 HUME PIPE 0.0-1.50 M DEEP 1562.52 RM
3197
LAYING, JOINTING 500 MM DIA R.C.C. NP3 HUME PIPE 0.0-1.50 M DEEP 1753.76 RM
3198
LAYING, JOINTING 600 MM DIA R.C.C. NP3 HUME PIPE 0.0-1.50 M DEEP 2024.79 RM
3199
LAYING, JOINTING 700 MM DIA R.C.C. NP3 HUME PIPE 0.0-1.50 M DEEP 2274.61 RM
3200
LAYING, JOINTING 800 MM DIA R.C.C. NP3 HUME PIPE 0.0-1.50 M DEEP 3392.12 RM
3201
LAYING, JOINTING 900 MM DIA R.C.C. NP3 HUME PIPE 0.0-1.50 M DEEP 3890.11 RM
3202
LAYING, JOINTING 1000 MM DIA R.C.C. NP3 HUME PIPE 0.0-1.50 M DEEP 4454.82 RM
3203
LAYING, JOINTING 1100 MM DIA R.C.C. NP3 HUME PIPE 0.0-1.50 M DEEP 5200.25 RM
3204
LAYING, JOINTING 1200 MM DIA R.C.C. NP3 HUME PIPE 0.0-1.50 M DEEP 5988.59 RM
3205 LAYING, JOINTING R.C.C. NP3 HUME PIPE 1.50 - 3.00 M DEEP (EXTRA OVER
ITEMS 3194 TO 3204) 6.45 % RM
3206 LAYING, JOINTING R.C.C. NP3 HUME PIPE 3.00 - 4.50 M DEEP (EXTRA OVER
ITEMS 3194 TO 3204) 13.05 % RM
3207 LAYING, JOINTING R.C.C. NP3 HUME PIPE 4.50 - 6.00 M DEEP (EXTRA OVER
ITEMS 3194 TO 3204) 20.75 % RM
3208 LAYING, JOINTING R.C.C. NP3 HUME PIPE 6.00 - 7.50 M DEEP (EXTRA OVER
ITEMS 3194 TO 3204) 31.55 % RM
3209 LAYING, JOINTING R.C.C. NP3 HUME PIPE 7.50 - 9.00 M DEEP (EXTRA OVER
ITEMS 3194 TO 3204) 46.15 % RM