0% found this document useful (0 votes)
21 views5 pages

LC1D32BD

The document describes a TeSys D IEC contactor that is 32A, 3-pole, and rated for 20HP at 480VAC. It provides technical specifications for the contactor such as voltage and current ratings, motor power ratings, standards compliance, terminal connections, and more.

Uploaded by

ha.tapia10
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
21 views5 pages

LC1D32BD

The document describes a TeSys D IEC contactor that is 32A, 3-pole, and rated for 20HP at 480VAC. It provides technical specifications for the contactor such as voltage and current ratings, motor power ratings, standards compliance, terminal connections, and more.

Uploaded by

ha.tapia10
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Product data sheet LC1D32BD

Characteristics TeSys D IEC contactor, 32 A, 3 P, 20 HP at 480


VAC, nonreversing, 24 VDC coil
Product availability : Stock - Normally stocked in distribution facility

Price* : 215.00 USD

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Main
Range TeSys
Product name TeSys D
Product or component type Contactor
Device short name LC1D
Contactor application Resistive load
Motor control
Utilisation category AC-3
AC-1
AC-4
Poles description 3P
Power pole contact composition 3 NO
[Ue] rated operational voltage Power circuit: <= 690 V AC 25...400 Hz
Power circuit: <= 300 V DC
[Ie] rated operational current 32 A 140 °F (60 °C)) <= 440 V AC AC-3 power circuit
50 A (at <60 °C) at <= 440 V AC AC-1 for power circuit
Motor power kW 7.5 kW 220...230 V AC 50/60 Hz AC-3)
15 kW 380...400 V AC 50/60 Hz AC-3)
15 kW 415...440 V AC 50/60 Hz AC-3)
18.5 kW at 500 V AC 50/60 Hz (AC-3)
18.5 kW at 660...690 V AC 50/60 Hz (AC-3)
7.5 kW at 400 V AC 50/60 Hz (AC-4)
Motor power HP (UL / CSA) 2 hp 115 V AC 50/60 Hz 1 phase
5 hp 230/240 V AC 50/60 Hz 1 phase
7.5 hp 200/208 V AC 50/60 Hz 3 phase
10 hp at 230/240 V AC 50/60 Hz for 3 phases motors
20 hp 460/480 V AC 50/60 Hz 3 phase
30 hp 575/600 V AC 50/60 Hz 3 phase
Control circuit type DC standard
[Uc] control circuit voltage 24 V DC
Auxiliary contact composition 1 NO + 1 NC
* Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.

Jan 4, 2021
1
[Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947
Overvoltage category III
[Ith] conventional free air thermal 10 A (at 60 °C) for signalling circuit
current 50 A 140 °F (60 °C) power circuit
Irms rated making capacity 140 A AC for signalling circuit conforming to IEC 60947-5-1
250 A DC for signalling circuit conforming to IEC 60947-5-1
550 A 440 V power circuit IEC 60947
Rated breaking capacity 550 A 440 V power circuit IEC 60947
[Icw] rated short-time withstand current 260 A 104 °F (40 °C) - 10 s power circuit
430 A 104 °F (40 °C) - 1 s power circuit
60 A 104 °F (40 °C) - 10 min power circuit
138 A 104 °F (40 °C) - 1 min power circuit
100 A - 1 s for signalling circuit
120 A - 500 ms for signalling circuit
140 A - 100 ms for signalling circuit
Associated fuse rating 10 A gG for signalling circuit conforming to IEC 60947-5-1
63 A gG <= 690 V type 1 power circuit
63 A gG <= 690 V type 2 power circuit
Average impedance 2 mOhm - Ith 50 A 50 Hz power circuit
[Ui] rated insulation voltage Power circuit: 690 V conforming to IEC 60947-4-1
Power circuit 600 V CSA
Power circuit 600 V UL
Signalling circuit: 690 V conforming to IEC 60947-1
Signalling circuit 600 V CSA
Signalling circuit 600 V UL
Electrical durability 1.65 Mcycles 32 A AC-3 <= 440 V
1.4 Mcycles 50 A AC-1 at Ue <= 440 V
Power dissipation per pole 2 W AC-3
5 W AC-1
Front cover With
Mounting support Rail
Plate
Standards CSA C22.2 No 14
EN 60947-4-1
EN 60947-5-1
IEC 60947-4-1
IEC 60947-5-1
UL 508
Product certifications DNV
GL
CCC
UL
GOST
BV
LROS (Lloyds register of shipping)
RINA
CSA
Connections - terminals Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end
Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)solid without cable end
Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)solid without cable end
Power circuit screw clamp terminals 1 0.00…0.02 in² (2.5…10 mm²)flexible without cable end
Power circuit screw clamp terminals 2 0.00…0.02 in² (2.5…10 mm²)flexible without cable end
Power circuit screw clamp terminals 1 0.00…0.02 in² (1…10 mm²)flexible with cable end
Power circuit screw clamp terminals 2 0.00…0.01 in² (1.5…6 mm²)flexible with cable end
Power circuit: screw clamp terminals 1 cable(s) 1.5…10 mm²solid without cable end
Power circuit: screw clamp terminals 2 cable(s) 2.5…10 mm²solid without cable end
Tightening torque Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2
Power circuit 22.13 lbf.in (2.5 N.m) screw clamp terminals flat Ø 6 mm
Power circuit 22.13 lbf.in (2.5 N.m) screw clamp terminals Philips No 2
Operating time 53.55...72.45 ms closing
16...24 ms opening
Safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1

2
Mechanical durability 30 Mcycles
Maximum operating rate 3600 cyc/h 60 °C

Complementary
Coil technology Built-in bidirectional peak limiting diode suppressor
Control circuit voltage limits 0.1...0.25 Uc (-40…70 °C):drop-out DC
0.7...1.25 Uc (-40…60 °C):operational DC
1...1.25 Uc 140…158 °F (60…70 °C) operational DC
Time constant 28 ms
Inrush power in W 5.4 W (at 20 °C)
Hold-in power consumption in W 5.4 W at 20 °C
Auxiliary contacts type type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1
type mirror contact 1 NC conforming to IEC 60947-4-1
Signalling circuit frequency 25...400 Hz
Minimum switching current 5 mA for signalling circuit
Minimum switching voltage 17 V for signalling circuit
Non-overlap time 1.5 ms on de-energisation between NC and NO contact
1.5 ms on energisation between NC and NO contact
Insulation resistance > 10 MOhm for signalling circuit
Contact compatibility M4
Compatibility code LC1D
Motor power range 7…11 kW at 200…240 V 3 phases
15…25 kW at 380…440 V 3 phases
15…25 kW at 480…500 V 3 phases
Motor starter type Direct on-line contactor
Contactor coil voltage 24 V DC standard

Environment
IP degree of protection IP20 front face conforming to IEC 60529
Protective treatment TH conforming to IEC 60068-2-30
Pollution degree 3
Ambient air temperature for operation -40…60 °C
60…70 °C with derating
Ambient air temperature for storage -76…176 °F (-60…80 °C)
Operating altitude 0...3000 m
Fire resistance 850 °C conforming to IEC 60695-2-1
Flame retardance V1 conforming to UL 94
Mechanical robustness Vibrations contactor open: 2 Gn, 5...300 Hz
Vibrations contactor closed: 4 Gn, 5...300 Hz
Shocks contactor closed: 15 Gn for 11 ms
Shocks contactor open8 Gn for 11 ms
Height 3.35 in (85 mm)
Width 1.77 in (45 mm)
Depth 3.98 in (101 mm)
Net Weight 1.18 lb(US) (0.535 kg)

Ordering and shipping details


Category 22355 - CTR,TESYS D,OPEN,9-38A DC
Discount Schedule I12
GTIN 00785901207313
Nbr. of units in pkg. 1
Package weight(Lbs) 1.29 lb(US) (0.59 kg)
Returnability Yes
Country of origin ID

3
Packing Units
Unit Type of Package 1 PCE
Package 1 Height 1.97 in (5 cm)
Package 1 width 3.62 in (9.2 cm)
Package 1 Length 4.41 in (11.2 cm)
Unit Type of Package 2 S02
Number of Units in Package 2 15
Package 2 Weight 20.45 lb(US) (9.275 kg)
Package 2 Height 5.91 in (15 cm)
Package 2 width 11.81 in (30 cm)
Package 2 Length 15.75 in (40 cm)
Unit Type of Package 3 P06
Number of Units in Package 3 240
Package 3 Weight 342.20 lb(US) (155.22 kg)
Package 3 Height 31.50 in (80 cm)
Package 3 width 31.50 in (80 cm)
Package 3 Length 23.62 in (60 cm)

Offer Sustainability
Sustainable offer status Green Premium product
California proposition 65 WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony
trioxide, which is known to the State of California to cause cancer. For more information go to
www.P65Warnings.ca.gov
REACh Regulation REACh Declaration
REACh free of SVHC Yes
EU RoHS Directive Compliant
EU RoHS Declaration
Toxic heavy metal free Yes
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
Pro-active China RoHS declaration (out of China RoHS legal scope)
Environmental Disclosure Product Environmental Profile
Circularity Profile End of Life Information
WEEE The product must be disposed on European Union markets following specific waste collection and
never end up in rubbish bins.
PVC free Yes

Contractual warranty
Warranty 18 months

4
Product data sheet LC1D32BD
Dimensions Drawings

Approximate Dimensions

You might also like