DD-138HF

Large Asphalt Compactors

Moving the
World Forward
Accelerate your productivity
The Ingersoll Rand DD-138HF is a 13.5-tonnes, 84-inch drum, high-frequency, asphalt compactor.
The high-frequency design allows for faster rolling speeds to keep up with the paver. High frequency
also assists in reaching target densities quicker by compacting in higher temperatures. Designed with
exclusive Ingersoll Rand 8-amplitude technology, the DD-138HF fine-tunes drum energy for
differing materials and changing conditions. Adjusting drum amplitude by only a thousandth of
an inch can mean the difference between achieving required density or fracturing aggregate
particles in the mix. Eight amplitudes are not a luxury when you consider what’s at stake.

MODEL DD-138HF
MACHINE WEIGHTS W/ ROPS / FOPS
Operating Weight (CECE) – lb (kg) 30,325 (13752)
Weight @ Front Drum – lb (kg) 15,880 (7202)
Weight @ Rear Drum – lb (kg) 14,445 (6551)
Shipping Weight – lb (kg) 28,728 (13028)
MACHINE DIMENSIONS
Length – in (mm) 236 (5995)
Width – in (mm) 92 (2337)
Height — Top Of Steering Wheel – in (mm) 93.8 (2382) PERFORMANCE FEATURES
Height — Top Of ROPS / FOPS – in (mm) 125.2 (3179)
Drum Base – in (mm) 139.8 (3550)
■
Constant 3,200 vpm system allows high, predictable
Curb Clearance – in (mm) 20 (509) rolling speeds
Inside Turning Radius (to drum edge) – in (mm) 179.6 (4562) ■
Eccentric rotation automatically matches direction of
DRUM travel, improving smoothness
Width – in (mm) 84 (2135) ■
Excellent visibility with clear line-of-sight to the
Diameter – in (mm) 55.1 (1400)
Shell Thickness (nominal) – in (mm) 0.78 (20) leading drum edge
Finish Machined surface; chamfered & radiused edges ■
Exclusive machined drums with chamfered, radiused
VIBRATION drum edges minimize drum edge marking and facilitate
Frequency – vpm (Hz) 3,200 (53.3) finish rolling
Nominal Amplitude – in (mm) High 0.025 (0.63) ■
Industry-leading centrifugal force of 42,260 lb for
Low 0.013 (0.33)
Centrifugal Force – lb (kN) High 42,260 (188) maximum compaction effort
Low 21,840 (97.1) ■
Patented Impact Spacing Meter provides operator with
PROPULSION a visual reference for speed control to maintain proper
Type Closed-loop hydrostatic, parallel circuit to both drums impact spacing, resulting in consistent smoothness
Drum Drive Heavy-duty radial piston LSHT motors; 2-speed rear motor ■
Premium shock and vibration isolated operator platform
Travel Speed – mph (km/h) High 0 – 6.6 (0 – 10.6)
Low 0 – 5 (0 – 8) and ROPS/FOPS, with 5-position swivel console
ENGINE ■
SMART start drum vibration system — vibration
Make / Model Cummins B5.9-TAA initiates with lead drum, followed by trailing drum for
Engine Type Turbocharged & charge air-cooled 6-cylinder compaction efficiency
Rated Power @ 2,200 rpm – hp (kW) 173 (129)
Electrical 12 V DC, negative ground; 95 A alternator
BRAKES AVAILABLE OPTIONS
Service Dynamic hydrostatic through propulsion system
■
Back-up alarm ■
Ingersoll Rand infrared
Parking / Secondary SAHR on front-drum & rear-drum drive motors ■
Cocoa mats pavement surface
WATER SYSTEM ■
Engine air pre-cleaner temperature sensor
Type Pressure spray drum wetting system with LDPE water tanks ■
Engine grid heater ■
Maintenance package
Pumps Diaphragm water pumps, primary & secondary for each drum Strobe light
■
Front and rear halogen ■

Spray Bars Primary & secondary spray bars for each drum
Nozzles Hand-serviceable fan spray nozzles; 12 per spray bar work lights ■
Urethane wipers
Filtration Sock strainer each tank; primary water filter each pump, fine filter each nozzle ■
Fuel strainer ■
Winterization kit
Drum Wipers Front & rear rubber wipers for each drum ■
High Intensity Discharge
Water Tank Capacity – gal (L) 328 (1241)
(HID) lighting with drum
MISCELLANEOUS edge lighting
Articulation Angle (center pivot steering) + / - 35°
Oscillation Angle + / - 10°
Fuel Tank Capacity – gal (L) 68.4 (259)
Hydraulic Oil Capacity – gal (L) 32 (121.1)
Gradeability (theoretical) 32%
Product improvement is a continuing goal at Ingersoll Rand. Designs and specifications are subject to change
without notice or obligation.

OPERATING COMFORT AND CONTROL

Ergonomic design of switches and controls
promotes smooth and efficient operation.
Lighted instrumentation makes evening
and nighttime work easier.
Swivel console places controls within (877) IR BRAND • ingersollrand.com
optimum reach. As part of the operator
platform, a 5-position swivel console
optimizes operator performance. © 2007 Ingersoll-Rand Company 15-0026