Gearmotors &

Speed Reducers
 Any product is only as good as its individual components.
Starting with careful attention to detail in the engineering stage Worm Gear Reducers
and continuing through the selection
of materials and manufacturing
processes, each component is
designed to stand up in rugged
industrial applications.

Die cast housings are produced

in our own facility. Machined on
Standard finish

precision CNC machining centers Washdown poxy

and checked on state-of-the-art

measuring equipment, these
housing provide rigid support and
accurate alignment of the gears.

Washdown stainless steel

Inline Helical
All motors are ball bearing
type, rated for industrial
duty. These motors, both
AC and DC, are constructed
from precision machined
components and are
dynamically balanced for
Universal Series
smooth quiet operation.

Outside surfaces are

protected by a durable heat
cured dry powder coating
which is FDA approved for
food processing applications.

Ratio Multipliers
Continuing education and
training helps our people
maintain the highest standards
of quality. From initial design
through final test, our employees
are dedicated to building the
best product possible.

Over 300 stock ratings are

available from Baldor district Gearmotors
offices and distributors across
the country. Thousands of
custom combinations can be
assembled from a wide range
of standard ratios, motors,
and mountings. Baldor sales
and engineering personnel are
available to help solve your
application problems.
b www.baldor.com
 Right Angle Gearmotors Features and Benefits
Dynamically balanced
Custom designed seals with armature/rotor for
a bi-directional helix for vibration free
Induction hardened and positive oil retention and long life smooth operation
ground worm significantly
increases both the operating life
and load capacity
Heavy duty
industrial
ball bearings
Internal
expansion
bladder
removes the
possibility of oil
contaminations
and allows
multi-position
mounting

Inverter resistant insulation system

with moisture resistant
varnish for long life
Castings are
designed to
minimize the
possibility of
porosity leaks
Synthetic oil lubrication for maximum efficiency
and long maintenance free operation

* Vertical motor below gearhead not recommended.

TYPICAL RIGHT ANGLE GEARMOTOR RATINGS

Gear
SPEED RANGE* Style
29 - 350 H 600

29 - 350 J 550

6.2 - 29 G 400

29 - 350 K 320

0.8 - 35 E 175

29 - 350 B 80

0.7 - 63 D 75

19 - 350 C 75

1.0 - 20 GNA 15

35 - 350 FTA 15

10 100 1000
*Based on 1750 RPM motor speed Torque (in-lbs.)

www.baldor.com 1
 Single Reduction Worm Gearmotors
• Hardened and ground steel worm provides quiet operation and long life
• Factory lubricated for life, no routine maintenance is required
• Double 5/16” output shafts provides mounting flexibility
• AC & DC ratings up to 1/20 hp
• Torque ratings to 15 in-lbs
Style FTA • Available in 90 VDC, 115 or 230/460 VAC, and 230 VAC Inverter Duty

• Hardened and ground steel worm provides quiet operation and long life
• Factory lubricated for life with synthetic oil
• Baldor’s exclusive internal oil expansion bladder. Keeps lubrication in and
contamination out
• Double 1/2” output shafts provides mounting flexibility
• AC & DC ratings up to 1/6 hp
• Torque ratings to 80 in-lbs
Style B • Available in 90 or 180 VDC, 115 or 230/460 VAC, and 230 VAC Inverter Duty

• Hardened and ground steel worm provides quiet operation and long life
• Factory lubricated for life with synthetic oil
• Baldor’s exclusive internal oil expansion bladder. Keeps lubrication in and
contamination out
• Double 1/2” output shafts provides mounting flexibility
• AC & DC ratings up to 1/4 hp
• Torque ratings to 75 in-lbs
• Available in 90 or 180 VDC and 115 or 230/460 VAC
Style C

• Hardened and ground steel worm provides quiet operation and long life
• Factory lubricated for life with synthetic oil
• Baldor’s exclusive internal oil expansion bladder. Keeps lubrication in and
contamination out
• Single 5/8” output shaft has both keyway and flat
• AC & DC ratings up to 1/2 hp
• Torque ratings to 320 in-lbs
• Available in 90 or 180 VDC, 115 or 230/460 VAC, and 230 VAC Inverter Duty

Style K

• Hardened and ground steel worm provides quiet operation and long life
• Factory lubricated for life with synthetic oil
• Baldor’s exclusive internal oil expansion bladder. Keeps lubrication in and
contamination out
• Double 3/4” output shafts provides mounting flexibility
• AC & DC ratings up to 1/2 hp
• Torque ratings to 550 in-lbs
• Available in 90 or 180 VDC, 115 or 230/460 VAC, and 230 VAC Inverter Duty
Style J
NOTE: Vertical motor below gearhead not recommended. Avoiding those positions where the high speed oil seal is immersed in oil, will provide greater security against
high speed input seal wear.
2 www.baldor.com
 • Hardened and ground steel worm provides quiet operation and long life
• Ratios from 5:1 to 60:1
• Factory lubricated for life with Klubersynth UH1-6-460 USDA food
grade oil
• Baldor’s exclusive internal oil expansion bladder, keeps oil in and
contamination out
• Symmetrical, 1.00" hollow through-bore design
• AC & DC ratings up to 1 hp
Style H • Torque ratings to 600 in-lbs

Double Reduction Worm Gearmotors

• Hardened and ground steel worms provides quiet operation and long life
• Ratios from 88:1 to 1600:1
• Double 5/16” output shafts provides mounting flexibility
• AC & DC ratings up to 1/97 hp
• Torque ratings to 15 in-lbs
Style GNA • Available in 90 VDC

• Hardened and ground steel worms provides quiet operation and long life
• Ratios from 27.4:1 to 2500:1
• Factory lubricated for life with Mobil SHC 634 synthetic oil
• Baldor’s exclusive internal oil expansion bladder. Keeps lubrication in and
contamination out
• Double 1/2” output shafts provides mounting flexibility
• AC & DC ratings up to 120 hp
• Torque ratings to 75 in-lbs
Style D
• Available in 90 or 180 VDC, 115 VAC and 230 VAC Inverter Duty

• Hardened and ground steel worms provides quiet operation and long life
• Ratios from 50:1 to 2000:1
• Factory lubricated for life with Mobil SHC 634 synthetic oil
• Baldor’s exclusive internal oil expansion bladder. Keeps lubrication in and
contamination out
• Double 5/8” output shafts provides mounting flexibility
• AC & DC ratings up to 1/4 hp
• Torque ratings to 175 in-lbs
Style E
• Available in 90 or 180 VDC, 115 or 230/460 VAC, and 230 VAC Inverter Duty

• Hardened and ground steel worm with bronze gear for strength and long life
• Hardened helical output gear provides quiet, high-torque transmission
• Ratios from 60:1 to 280:1
• Factory lubricated for life with synthetic oil
• Single 3/4" output shaft with keyway
• AC & DC ratings up to 1/8 hp
Style G • Available in 90 or 180 VDC, 115 or 230/460 VAC, and 230 VAC Inverter Duty

NOTE: Vertical motor below gearhead not recommended. Avoiding those positions where the high speed oil seal is immersed in oil, will provide greater security against high
speed input seal wear.

www.baldor.com 3
 Parallel Shaft Gearmotors
Heavy duty
Dynamically balanced armature/rotor
industrial
for vibration free smooth operation
ball bearings
Custom designed seals with a
bi-directional helix for positive
oil rentention and long life

Synthetic oil
lubrication Inverter resistant insulation system
maximum for with moisture resistant
efficiency varnish for long life
and long
maintenance free
operation Load balanced hardened
helical and spur gearing
for increased torque
Castings are designed to minimize and overhung load capabilities
the possibility of porosity leaks

4 www.baldor.com
 Parallel Shaft Gearmotors
• Induction hardened helical and spur gears for extra strength
• Ball and needle bearing construction for improved torque capacity
• Factory lubricated for life with synthetic oil
• Output shaft is 1/2” diameter
• Industry standard mounting dimensions
• AC & DC ratings up to 1/4 hp
• Ratios from 5:1 to 3125:1
• Torque ratings to 140 in-lbs
• Available in 90 or 180 VDC, 115 VAC and 230 VAC Inverter Duty
Style PSSH • Additional bases for greater mounting flexibility available

• Induction hardened helical and spur gears for extra strength

• Ball and needle bearing construction for improved torque capacity
• Factory lubricated for life with synthetic oil
• Output shaft is 5/8” diameter
• Industry standard mounting dimensions
• AC & DC ratings up to 1/8 hp
• Ratios from 5:1 to 625:1
• Torque ratings to 235 in-lbs
• Available in 90 or 180 VDC, 115 VAC and 230 VAC Inverter Duty
• Additional bases for greater mounting flexibility available
Style PSM

• Induction hardened helical gears for extra strength

• Ball and needle bearing construction for improved torque capacity
• Factory lubricated for life with synthetic oil
• Output shaft is 3/4” diameter
• Industry standard mounting dimensions
• AC & DC ratings up to 1/2 hp
• Ratios from 5:1 to 625:1
• Torque ratings to 620 in-lbs
• Available in 90 or 180 VDC, 115 VAC or 230/460 VAC, and 230 VAC
Inverter Duty
• Additional bases for greater mounting flexibility available
Style PSL

Style PSLH

NOTE: Vertical motor below gearhead not recommended. Avoiding those positions where the high speed oil seal is immersed in oil, will provide greater security against high
speed input seal wear.

www.baldor.com 5
 900 Series Universal Series
Speed Reducers Speed Reducers
Over 350 models in stock, Baldor's Universal Series
a 24-hour Quick Ship Reducers boast a robust
program on most popular cast iron construction with
non-stock items, and 36 integrated mounting feet
warehouses throughout eliminating the need for bolt
North America – Baldor on bases.
gives you the features
you want, where and
when you want them.
Specifications Specifications
• Nine center distances • Ten center distances
• Fractional through 15 horsepower • Fraction through 28.5 Hp
• Output torque ratings up to 3200 inch pounds • Output torque ratings:
– single reduction Up to 30,000 inch pound - single reduction
• Solid and hollow output shaft designs Up to 22,500 inch pound - double reduction
• Single reduction ratios from 5:1 to 60:1 • Solid output shaft design only
Double reduction from 75:1 to 3600:1 • Single reduction ratios from 5:1 to 60:1
• Standard NEMA C-face quill or coupled input as well Double reduction from 75:1 to 3600:1
as solid worm type input • Standard NEMA C-face quill or coupled input as well as
• Adapter kits available to convert two stock single stage solid worm type input
units into a double reduction unit • Adapter kits available to convert two stock single stage
Features units into a double reduction unit.
• Dimensionally interchangeable with major U.S.
manufacturers Features
• Chill cast precision hobbed tin bronze gear provides • Integral cast mounting feet
superior wear characteristics • Chill cast precision hobbed tin bronze gear provides
• Carburized and ground worm provides optimum superior wear characteristics
efficiency and cool quiet operation • Carburized and ground worm provides optimum
• Plunge ground seal journals for optimum seal life efficiency and cool quiet operation
• Completely sealed and lubricated for life with USDA H1 • Plunge ground seal journals for optimum seal life
food grade oil providing years of trouble-free operation • Completely sealed and lubricated for life with USDA H1
food grade synthetic oil which ensures years of trouble-
free operation

Inline Helical Features

• Dimensionally interchangeable with other major
Baldor's ILH Gearboxes
are engineered for flexibility, manufacturers
greater torque density • Standard NEMA c-face input accepts standard motors
in compact housing • Accessible oil seals for easy routine maintenance
configuration, and increased • All sizes can be double sealed on the high speed shaft for
horsepower capability severe applications
• Oversized bearings for high overhung load ratings
Specifications • Rugged high quality cast iron housings
• Fractional through 75 horsepower
• Output torque range 116 in-lbs – 123914 in-lbs
• Ratio range 1.41:1 – 359:1
• Foot mount and output flange models
• Standard NEMA C-face and projecting input shaft
models
• NEMA 56C – 360TC
IEC 71D – 250D

6 www.baldor.com
900 Series
All Stainless Steel
Speed Reducers Ratio Multipliers
Baldor's all stainless steel speed reducers are easy to Single stage parallel shaft reducers (or speed increasers)
clean and sanitize, minimizing bacterial contamination are available from stock with NEMA C-face input and
for food processing equipment. Stainless steel provides output. They increase output torque, double reduction
the highest protection for pharmaceutical and chemical capacity and offer greater flexibility of inventory.
processing applications where harsh chemicals and
cleaning solutions can be extremely corrosive to aluminum, • Increases torque and efficiency
cast iron and other materials. • Ratings up to 10 horsepower
• Pre-Fill at the factory
Specifications • Accept NEMA 56C or 140TC input
• Bolts to any NEMA 56C or 140TC Reducer
• Three center distances: 1.75, 2.06, 2.62 and 3.25 • 4 Ratios Available
• Fractional through 5 Hp
• Solid and hollow output with torque ratings up to 2255 Output RPM Output
Input
inch pounds Ratio Size @ Torque
Hp
1750 RPM In In. Lbs.
• Single and double reduction ratios available
• Standard NEMA C-Face Quill input 2 1 875 2.00 141
3 1 583 1.65 175
Features 4 1 438 1.38 195
• Smooth 316 stainless steel finish minimizes the chance 5 1 350 1.10 194
for bacteria growth. Excellent corrosion resistance,
especially where bleach solutions may be used 2 2 875 12.42 877

• 300 Series Stainless Steel output shaft and stainless 3 2 583 8.68 911
hardware provides superior corrosion resistance 4 2 438 6.36 885
• O-ring sealed housing insures that all entry points are 5 2 350 5.40 431
completely sealed prevention ingress of water or other
5 2 350 5.40 431
contaminants, extending service life
• Completely sealed and lubricated for life with USDA H1
food grade oil. Providing years of trouble-free operation.

www.baldor.com 7
 Stainless Steel
Style SSHF
Hollow Output Shaft

Size c.d. a b c d e f h j k m n O p
56c 56C
180TC 180TC
140tc 140TC
918 1.75 5.62 3.69 4.19 2.75 2.09 1.38 2.06 4.69 — 5.75 5.70 2.85 7.12 — 3.81
921 2.06 6.13 3.83 5.00 2.88 2.50 1.44 2.28 5.06 — 6.38 6.44 3.22 7.65 — 4.34
926 2.62 7.45 4.44 6.38 3.38 3.19 1.69 2.94 5.75 6.19 8.00 6.88 3.44 8.87 10.19 5.56
932 3.25 9.00 5.88 7.50 4.00 3.75 2.00 3.50 6.57 7.00 9.38 8.50 4.25 10.06 11.38 6.75
Q Output Shaft Approximate Approximate
T W-Key
56C Bore Weight Oil Capacity
Size 180TC R V
140TC Tap Size Depth Std. Max. Sq. Length Lbs. oz.
918 7.85 — 0.312-18 0.59 1.42 1.000 1.125 .60 0.250 1.625 31 14.0
921 8.63 — 0.375-16 0.69 1.73 1.250 1.250 .63 0.250 1.625 36 17.5
926 9.90 10.34 0.375-16 0.69 2.56 1.438 2.000 .63 0.375 1.500 59 32.0
932 13.42 13.85 0.438-14 0.938 2.76 1.938 2.125 1.312 0.500 2.250 100 67.0

Stainless Steel
Style SSF
Basic

j O
Size c.d. a b c d e f h 56c k m n 56C p
180TC 180TC
140tc 140TC
918 1.75 5.56 3.69 4.19 2.75 2.09 1.38 2.06 4.69 — 5.75 6.78 4.31 7.12 — 3.81
921 2.06 6.06 3.81 5.00 2.88 2.50 1.44 2.28 5.07 — 6.38 7.22 4.69 7.65 — 4.34
926 2.62 7.38 4.44 6.38 3.38 3.19 1.69 2.94 5.75 6.19 8.00 8.50 5.62 8.87 10.19 5.56
932 3.25 9.00 5.88 7.50 4.00 3.75 2.00 3.50 6.57 7.00 9.38 10.69 7.06 10.06 11.38 6.75

Q T Output Shaft W-Key Approximate Approximate

56C Tap u Weight Oil Capacity
Size 180TC Depth +0.000 v Sq. Length
140TC Size -0.001 Lbs. oz.

918 7.85 — 0.312-18 0.59 0.875 2.06 0.188 1.00 30 14.0

921 8.63 — 0.375-16 0.59 1.000 2.38 0.250 1.25 36 17.5
926 9.90 10.34 0.375-16 0.69 1.125 2.78 0.250 2.00 56 32.0
932 13.42 13.85 0.438-14 0.938 1.375 3.44 0.313 2.500 100 67.0

8 www.baldor.com
 Size 1

Size 2

Gearmotor Accessories

BKP2400 Conduit Box B92 Base

BKP2400 is an optional combination conduit/ B92 is a formed steel-mounting base that bolts
capacitor mounting kit. This box may be use with to the bottom of the PSM gearbox casting.
stock 24 frame AC motors and Gearmotors. Provides secure foot mounting and drop-in
interchangeability with other manufacturers.
2.95
1.51 2.95
.39
1.51 .39

1.00 8 x .281 HOLES, THRU

1.00 8 x .281 HOLES, THRU
1.45
1.45
2.01
3.98 2.01 4.78
3.98 4.78
1.45
2.00 1.45
2.00

4 x .281
4 x .281
1.50 .47
1.50 .47
1.50
1.50

www.baldor.com 9
 Gearmotor Accessories

LB73
LB73GR
LB74

LB75
LB73 & LB73GR are “L” type mounting brackets used with the PSSH gearmotor. Securely mounts to gear face in a 90
degree locations for floor, wall or ceiling mount. LB73 is painted black to match stock DC motor while LB74GR is painted
gray to match our AC line.

LB74 “L” type mounting brackets used with the PSL and PSLH gearmotor. Securely mounts to gear face in a 90 degree
locations for floor, wall or ceiling mount. LB74 is not recommended for units weighing over 20 lbs.

LB75 “L” type mounting brackets used with the PSL and PSLH gearmotor. Securely mounts to gear face in a 90 degree
locations for floor, wall or ceiling mount. LB75 is recommended for units weighing over 20 lbs.

A B C D E F H BA W X Y
LB73 3.75 4.50 3.94 3.03 3.75 1.88 2.25 1.50 3.40 2.65 0.93
LB74 4.50 6.00 5.45 4.00 5.00 2.50 3.10 1.50 4.63 3.62 1.28
LB75 6.00 6.00 6.00 4.00 5.00 2.50 3.10 1.50 6.00 3.62 1.28

H Gearbox Accessories
Baldor offers optional base and shaft kits for
H style gearmotors. Adding a base and shaft
kit allows them to be used in applications
requiring a right-angle shaft extension. The
shaft can be used for either right or left hand
output applications.
Catalog List Mult. Ap’x.
Description
Number Price Sym. Shpg. Wgt.
B19H71 Horiz Base Kit 67 A8 1
SH10HS Output Shaft Kit 21 A8 2

10 www.baldor.com
 NEMA Enclosed DC Controls
FOR PERMANENT MAGNET OR SHUNT WOUND MOTORS

Features common to enclosed and chassis mount controls:

• Full wave SCR control with free wheeling diode (NEMA type K) except regen controls.
• Field power supply allows use with shunt wound DC motors as well as permanent magnet motors.
• Adjustable accel, decel, current limit, IR comp, min. and max. speed. Current limit indicating LED.
• 5K speed pot for speed control (remote on chassis mount).
• Kit available for forward/brake/reverse switching (BC140, BC154, BC254 only).
• Horsepower resistor and armature fuse selectable to match control and motor for each application.
(Included in price of control).
• Customer selectable armature or tach feedback (except BC138, BC139, BC140, BC140-FBR).
BC140 Enclosed • Anti-demag circuit protects PM motors and helps protect the SCR power bridge against direct shorts.
(NEMA 1) • Noise rejection circuit eliminates false starts and blown SCR’s.
• US and Canadian UL component recognition.

Additional features are standard only on enclosed control:

• On-off switch • Terminal strip connections
• 115/230 voltage selection switch or jumper • Built in armature and line fusing
• Pilot light (BC140, BC140-FBR, BC200, BC201, BC202, • BC140-FBR includes Forward-Brake-Reverse switch
BC203, BC204, BC254 and BC354 only)

A Plug-in Horsepower Resistor® and armature fuse must be ordered and installed in BC138, BC139, BC140, BC140-FBR,
BC141 and BC142. Spare resistor kits are also available. Resistor should be selected based on the motor’s rated current.

Approximate
Hp Catalog Shipping Weight Input
Range Number (Lbs) Voltage
1/100-1/3 BC138 1 115 VAC
1/50-3/4 BC139 1 230 VAC
1/100-2* BC140 3 115/230 VAC
1/100-2* BC140-FBR 3 115/230 VAC
NOTE: *1 Hp at 115V and 2 Hp at 230V requires BC143 heatsink kit.
FBR = Forward/Brake/Reverse.

DC Control Accessories
Approximate
Catalog Shipping Weight
Number Description (Lbs)
BC24-LF Ac Line Filter for use with CE Applications 0.5
BC143 External Heatsink Kit (BC140, BC140-FBR, BC141, BC142) 2.0
BC144 Forward-Brake-Reverse Switch Kit for BC140 0.4
BC145 Signal Isolator Board 0.5
BC146 Current Sensing Relay/Overload Protector 0.4
BC147 Barrier Terminal Board (BC141 & BC142) 0.3
BC148 Replacement Potentiometer Kit (5K ohm) 0.1
BC149 Knob and Dial Kit 0.1
BC151 Electronic Speed Potentiometer 0.5
BC152 Barrier Terminal Board With Signal Isolator (BC141 AND BC142) 1.0
BC218 DIN-rail mounting kit for BC141, BC142 or BC204 0.5
NOTE: BC24-LF is an AC line filter required for applications where CE is required if the control is not filtered elsewhere in the application.
This filter is used on most 115 or 230 VAC, single phase applications where CE is required.

www.baldor.com 11
 Chassis Mount DC Controls

BC141 / BC142 BC155

Approximate Input
Hp Catalog Shipping Weight Voltage
Range Number (Lbs) (1Ph,50/60 Hz)
1/100-1.5** BC141 1 115 VAC
1/50-3** BC142 2 230 VAC
5 BC155 5 230 VAC
NOTE: Above controls include 5k speed potentiometer.
**1-1.5 Hp at 115 Volts and 2-3 Hp at 230 Volts, requires BC143 Heatsink kit. BC155 Includes integral heatsink.

Plug-In Horsepower Resistor & Fuse Kit

A Plug-in Horsepower Resistor® and armature fuse must be ordered and installed in BC138, BC139, BC140, BC140-FBR, BC141 and
BC142. These should be selected based on the motor’s rated current.

Motor Hp Plug-In Hp
Armature Resistor Baldor Approximate DC Fuse
Voltage Resistance Catalog Motor Current Rating
90-130 VDC 180 VDC Value (Ohms) Number (DC Amps) (AC Amps)
1/100 1/50 1.00 BR1000 0.20 0.50
1/50 1/25 0.51 BR0510 0.30 0.50
1/30 1/15 0.35 BR0350 0.33 0.50
1/20 1/10 0.25 BR0250 0.50 0.75
1/15 1/8 0.25 BR0251 0.80 1.00
1/12 1/6 0.18 BR0180 0.85 1.25
1/8 1/4 0.10 BR0100 1.30 2.00
1/6 1/3 0.10 BR0101 2.00 2.50
1/4 1/2 0.05 BR0050 2.50 4.00
1/3 3/4 0.035 BR0035 3.30 5.00
1/2 1 0.025 BR0025 5.00 8.00
3/4 1 1/2 0.015 BR0015 7.50 12.00
1* 2* 0.01 BR0010 10.00 15.00
1 1/2* 3* 0.006 BR0006 15.00 25.00**
NOTE: * External Heatsink required. ** Also used with AC Line Fuse. For AC line fuse rating see manual.

12 www.baldor.com
Reducer Accessories
and Modifications
• Base kits
• Hollow shaft bushings
• Torque arm kits
• Cast iron and steel output flanges
• Tack on double reduction adapters
• Wash-down units

Inverter Duty Gearmotors

Baldor's Inverter Duty Gearmotor line is rated 3/8 Hp at
230 Volt, 60 Hz, 3-Phase, with an operating range from
10-90 Hz. Available in a broad range of ratios meeting
your demanding application needs.

PT Components
• Fixed Bore, Bush Type, Fractional Fixed Bore, and Step
Pulleys
• "QD" Bushings and Weld-on Hubs, Taper-Lock
Bushings, XT Bushings and Hubs
• Maska Starflex, Maska 4-Flex and Maskaflex couplings
• Timing Pulleys and HTD Sprockets
• Synchronous & V-Belts

www.baldor.com 13
 For more information about our products and where to buy them,
please visit our website at www.baldor.com

UNITED STATES ILLINOIS KANSAS CITY PITTSBURGH TORONTO

CHICAGO 9810 Industrial Blvd. 159 PROMINENCE DRIVE OAKVILLE, ONTARIO
ARIZONA 340 remington blvd. Lenexa, KS 66215 NEW KENSINGTON, PA 15068 2910 Brighton Road
PHOENIX BOLINGBROOK, IL 60440 PHONE: 816-587-0272 PHONE: 724-889-0092 Oakville, Ontario, Canada L6H 5S3
4211 S 43RD PLACE PHONE: 630-296-1400 FAX: 816-587-3735 FAX: 724-889-0094 PHONE: 905-829-3301
PHOENIX, AZ 85040 FAX: 630-226-9420 FAX: 905-829-3302
PHONE: 602-470-0407 NEW YORK TENNESSEE
FAX: 602-470-0464 INDIANA AUBURN MEMPHIS MONTREAL, QUEBEC
INDIANAPOLIS ONE ELLIS DRIVE 4000 WINCHESTER ROAD 5155 J-ARMAND Bombardier
ARKANSAS 5525 W. MINNESOTA STREET AUBURN, NY 13021 MEMPHIS, TN 38118 SAINT-Hubert, Québec
CLARKSVILLE INDIANAPOLIS, IN 46241 PHONE: 315-255-3403 PHONE: 901-365-2020 Canada J3Z 1G4
706 West Main Street PHONE: 317-246-5100 FAX: 315-253-9923 FAX: 901-365-3914 PHONE: 514-933-2711
CLARKSVILLE, AR 72830 FAX: 317-246-5110 FAX: 514-933-8639
PHONE: 479-754-9108 NORTH CAROLINA TEXAS
FAX: 479-754-9205 IOWA GREENSBORO DALLAS VANCOUVER,
DES MOINES 1220 ROTHERWOOD ROAD 2920 114th Street Suite 100 BRITISH COLUMBIA
CALIFORNIA 1943 Hull Avenue GREENSBORO, NC 27406 Grand Prairie, TX 75050 1538 KEBET WAY
LOS ANGELES DES MOINES, IA 50313 PHONE: 336-272-6104 PHONE: 214-634-7271 PORT COQUITLAM,
6480 FLOTILLA STREET PHONE: 515-263-6929 FAX: 336-273-6628 FAX: 214-634-8874 BRITISH COLUMBIA V3C 5M5
COMMERCE, CA 90040 FAX: 515-263-6515 PHONE 604-421-2822
PHONE: 323-724-6771 OHIO HOUSTON FAX: 604-421-3113
FAX: 323-721-5859 MARYLAND CINCINNATI 10355 W. Little York ROAD
BALTIMORE 2929 CRESCENTVILLE ROAD Suite 300 WINNIPEG, MANITOBA
HAYWARD 7071A Dorsey Run Rd WEST CHESTER, OH 45069 Houston, TX 77041 54 PRINCESS STREET
21056 FORBES STREET ELKRIDGE, MD 21075 PHONE: 513-771-2600 PHONE: 281-977-6500 WINNIPEG, MANITOBA R3B 1K2
HAYWARD, CA 94545 PHONE: 410-579-2135 FAX: 513-772-2219 FAX: 281-977-6510 PHONE: 204-942-5205
PHONE: 510-785-9900 FAX: 410-579-2677 FAX: 204-956-4251
FAX: 510-785-9910 CLEVELAND UTAH
MASSACHUSETTS 8929 FREEWAY DRIVE SALT LAKE CITY MEXICO
COLORADO BOSTON MACEDONIA, OH 44056 2230 SOUTH MAIN STREET LEON, guanajuato
DENVER 6 PULLMAN STREET PHONE: 330-468-4777 SALT LAKE CITY, UT 84115 KM. 2.0 Blvd. Aeropuerto
3855 Forest Street WORCESTER, MA 01606 FAX: 330-468-4778 PHONE: 801-832-0127 Leon, Guanajuato, CP37545
Denver, CO 80207 PHONE: 508-854-0708 FAX: 801-832-8911 Mexico
PHONE: 303-623-0127 FAX: 508-854-0291 OKLAHOMA PHONE: +52 477 761 2030
FAX: 303-595-3772 TULSA WISCONSIN FAX: +52 477 761 2010
MICHIGAN 5555 E. 71st St., Suite 9100 MILWAUKEE
CONNECTICUT DETROIT Tulsa, OK 74136 1960 SOUTH Calhoun Road
WALLINGFORD 5993 Progress Drive PHONE: 918-366-9320 NEW BERLIN, WI 53151
65 SOUTH TURNPIKE ROAD STERLING HEIGHTS, MI 48312 FAX: 918-366-9338 PHONE: 262-784-5940
WALLINGFORD, CT 06492 PHONE: 586-978-9800 FAX: 262-784-1215
PHONE: 203-269-1354 FAX: 586-978-9969 OREGON
FAX: 203-269-5485 PORTLAND INTERNATIONAL SALES
MINNESOTA 12651 SE Capps Road FORT SMITH, AR
FLORIDA MINNEAPOLIS Clackamas, OR 97015 P.O. BOX 2400
TAMPA/PUERTO RICO/ 13098 George Weber Dr, Suite 400 PHONE: 503-691-9010 FORT SMITH, AR 72902
VIRGIN ISLANDS ROGERS, MN 55374 FAX: 503-691-9012 PHONE: 479-646-4711
3906 EAST 11TH AVENUE PHONE: 763-428-3633 FAX: 479-648-5895
TAMPA, FL 33605 FAX: 763-428-4551 PENNSYLVANIA
PHONE: 813-248-5078 PHILADELPHIA CANADA
FAX: 813-241-9514 MISSOURI 1035 THOMAS BUSCH EDMONTON, ALBERTA
ST LOUIS MEMORIAL HIGHWAY 4053-92 STREET
GEORGIA 13678 Lakefront Drive PENNSAUKEN, NJ 08110 EDMONTON, ALBERTA T6E 6R8
ATLANTA Earth City, MO 63045 PHONE: 856-661-1442 PHONE: 780-434-4900
62 TECHNOLOGY DRIVE PHONE: 314-373-3032 FAX: 856-663-6363 FAX: 780-438-2600
ALPHARETTA, GA 30005 FAX: 314-373-3038
PHONE: 770-772-7000
FAX: 770-772-7200

Baldor Electric Company

P.O. Box 2400
Fort Smith, AR 72902-2400 U.S.A.
Ph (479) 646-4711 • Fax (479) 648-5792
© Baldor Electric Company International Fax (479) 648-5895 Printed in U.S.A.
BR1502 www.baldor.com 3/14 Litho 10000