Photoelectric Sensors
BOS 5K-PS-ID10-S75
Order Code: BOS0124
1) Optical axis receiver, 2) Optical axis emitter, 3) Sn, 4) Output function, 5) stability
Basic features Electrical connection
Approval/Conformity cULus Connection Connector, M8x1-Male, 4-pin
CE Polarity reversal protected yes
WEEE Short-circuit protection yes
UKCA
Basic standard IEC 60947-5-2
Principle of operation Photoelectric sensor
Electrical data
Series 5K No-load current Io max. at Ue 30 mA
Style Square Operating voltage Ub 10...30 VDC
Connection 90° Rated operating current Ie 100 mA
Trademark Global Rated operating voltage Ue DC 24 V
Ready delay tv max. 100 ms
Display/Operation Ripple max. (% of Ue) 10 %
Switching frequency 500 Hz
Adjuster Potentiometer 270°
Turn-off delay toff max. 1 ms
Display Output function- LED yellow
Turn-on delay ton max. 1 ms
Stability - LED green
Voltage drop Ud max. at Ie 2V
Setting Rated switching distance (Sn)
1/3
Internet www.balluff.com eCl@ss 9.1: 27-27-09-03
Subject to change without notice: 229605 ETIM 6.0: EC001821
BOS0124_0.88_2024-02-08
Photoelectric Sensors
BOS 5K-PS-ID10-S75
Order Code: BOS0124
Environmental conditions Mechanical data
Ambient temperature -25...55 °C Dimension 10.8 x 43.5 x 19.5 mm
EN 60068-2-27, Shock Half-sinus, 50 gn, 11 ms, 3x10 Mounting part Screw M3
EN 60068-2-6, Vibration 10…55 Hz, amplitude 0.75 mm,
3x20 min
Optical features
IP rating IP67
Ambient light max. 5000 Lux
Beam characteristic Divergent
Functional safety
Light spot size Ø 50 mm at 500 mm
MTTF (40 °C) 38 a Light type Infrared
Principle of optical operation Diffuse sensor, energetic
Interface Switching function, optical Light-on
Wave length 880 nm
Switching output PNP normally open (NO) Pin 4
Range/Distance
Material
Range 0...900 mm
Housing material PC
Rated operating distance Sn 900 mm Adjustable
PBT
Material sensing surface PMMA
Remarks
Order accessories separately.
For additional information, refer to user's guide.
Only for applications per NFPA 79 (machines with a supply voltage of maximum 600 V). Use an R/C (CYJV2) cable with suitable properties for attaching the
device.
Reference object (target): gray card, 200 x 200, 90 % remission, axial approach.
The sensor is functional again after the overload has been eliminated.
For more information about MTTF and B10d see MTTF / B10d Certificate
Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no
warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way.
Connector Drawings
Wiring Diagrams
2/3
Internet www.balluff.com eCl@ss 9.1: 27-27-09-03
Subject to change without notice: 229605 ETIM 6.0: EC001821
BOS0124_0.88_2024-02-08
Photoelectric Sensors
BOS 5K-PS-ID10-S75
Order Code: BOS0124
Opto Symbols
3/3
Internet www.balluff.com eCl@ss 9.1: 27-27-09-03
Subject to change without notice: 229605 ETIM 6.0: EC001821
BOS0124_0.88_2024-02-08
