HDO4000

High Definition
Oscilloscopes
200 MHz – 1 GHz

Key Features Combining Teledyne LeCroy’s HD4096 high definition 12-bit

technology, with long memory, a compact form factor, 12.1” touch
• 12-bit ADC resolution, up to
15-bit with enhanced resolution
screen display and powerful debug tools, the HDO4000 is the
ideal oscilloscope for precise measurements and quick debug.
• 200 MHz, 350 MHz, 500 MHz, Tools such as WaveScan Search and Find, LabNotebook Report
1 GHz bandwidths
Generator, and History Mode help identify and isolate problems
•  ong Memory – up to 50 Mpts
L for faster troubleshooting.

• 12.1” touch screen display HD4096 Technology Large 12.1” Touch Screen
HD4096 high definition technology Navigating complicated user interfaces
• Multi-language User Interface consists of high sample rate 12-bit is a thing of the past thanks to the

• WaveScan – Advanced Search ADCs, high signal-to-noise input large touch screen display of the

and Find amplifiers and a low-noise system HDO4000. The user interface was
architecture. This technology enables designed for touch screens which
• LabNotebook Documentation high definition oscilloscopes to capture makes navigating the it extremely
and Report Generation and display signals of up to 1 GHz with intuitive. Every aspect of the interface
high sample rate and 16 times more is touchable making channel,
• History Mode – Waveform
resolution than other oscilloscopes. timebase and trigger settings only
Playback
one touch away.
• Spectrum Analyzer Mode Long Memory
With up to 50 Mpts of memory Compact Form Factor
• Power Analysis Software the HDO4000 High Definition The HDO4000 builds upon Teledyne

• Serial Data Trigger and Decode Oscilloscopes can capture large LeCroy’s history of “Large Screen,
amounts of data with more precision Small Footprint” with its 12.1” wide
than other oscilloscopes. The 2.5 GS/s, touch screen display and 5” depth.
50 Mpts architecture provides the Additionally, the innovative rotating,
ability to capture a fast transient or a tilting feet enable the HDO4000 to be
long acquisition. placed in 4 different viewing positions
ensuring optimal viewing no matter
where it is being positioned in the lab.

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 HD4096 High Definition Technology

HD4096 high definition technology consists of

high sample rate 12-bit ADCs, high signal-to-noise
ratio amplifiers and a low-noise system architec-
ture. This technology enables high definition
oscilloscopes to capture and display signals of
High Signal High Sample up to 1 GHz with high sample rate and 16 times
to Noise Input Rate 12-bit more resolution than other oscilloscopes.
Amplifiers ADC’s
Oscilloscopes with HD4096 technology have higher resolution
and measurement precision than 8-bit alternatives. The high
sample rate 12-bit ADCs provide high resolution sampling at
up to 2.5 GS/s. The high performance input amplifiers deliver
Low Noise phenomenal signal fidelity with a 55 dB signal-to-noise ratio
System and provide a pristine signal to the ADC to be digitized. The
Architecture low-noise signal architecture ensures that nothing interferes
with the captured signal and the oscilloscope displays a
waveform that accurately represents the signals from the
device under test.

16x Closer to Perfect

8-bit 12-bit

Digitized Waveform

Signal from
Quantization Error
Device Under Test

16x More Resolution

12-bits of vertical resolution provides sixteen times more resolution than 8-bits. The 4096 discrete
levels reduce the quantization error. Signals captured with lower resolution oscilloscopes have a higher
level of quantization error resulting in less accurate waveforms on the display. Signals captured on an
oscilloscope with 12-bit HD4096 technology are accurately displayed with minimal quantization error.

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 Debug in High Definition with hd4096

Oscilloscopes with HD4096 have a variety of benefits that

allow the user to debug in high definition. Waveforms
displayed by high definition oscilloscopes are cleaner and
crisper. More signal details can be seen and measured; these
measurements are made with unmatched precision resulting
in better test results and shorter debug time.

Clean, Crisp Waveforms More Signal Details Unmatched

When compared to waveforms Signal details often lost in the
Measurement Precision
captured and displayed by 8-bit noise are clearly visible and easy to Precise measurements are critical for
oscilloscopes, waveforms captured distinguish when captured on effective debug and analysis. HD4096
with HD4096 technology are oscilloscopes with HD4096. Details enables oscilloscopes to deliver
dramatically crisper and cleaner. which were previously difficult to unmatched measurement precision to
Oscilloscopes with HD4096 acquire even see can now be easily seen and improve testing capabilities and provide
waveforms at high resolution, high measured. Using the oscilloscope better results.
sample rate and low noise to display zoom capabilities gives an even closer
the most accurate waveforms. look at the details for unparalleled
insight to the signals on screen.

8-bit 12-bit
A A

B C B
C

A Clean, Crisp Waveforms | Thin traces show the actual waveform with minimal noise interference

B More Signal Details | Waveform details lost on an 8-bit oscilloscope can now be clearly seen

C Unmatched Measurement Precision | Measurements are more precise and not affected by quantization noise

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 Touch Screen Simplicity

Don’t waste time searching through a complex menu opened. Measurements can be touched to adjust their
structure to find the proper setting. Configuring the settings and cursors can be positioned precisely by touch-
HDO4000 is simple thanks to the intuitive touch screen ing and dragging them to the proper location. A box can be
user interface. Everything on the screen is interactive. To drawn around a portion of a waveform to create a zoom of
adjust channel, timebase, or trigger settings, simply touch that waveform. Even waveform offset and delay can be
the associated descriptor box and the appropriate menu is adjusted simply by touching a dragging the waveform.

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 Tools for Efficient Debug and Validation

Spectrum Analyzer Mode

View the frequency content of
signals with spectrum analyzer style
controls, easily adjust the frequency
span, resolution bandwidth and cen-
ter frequency. A unique peak search
detects spectral components and
presents frequency and level details
in an interactive table. Use the
spectrogram display to see changes
in the spectrum over time.

WaveScan Advanced LabNotebook Documentation and Serial Bus Trigger and Decode
Search and Find Tool Report Generation Tool View decoded protocol information
Quickly search waveforms for Save all results and data with a single on top of physical layer waveforms
runts, glitches or other anomolies button press and create custom and trigger on protocol specific
with WaveScan. reports with LabNotebook. messages.

Sequence Mode Acquisition Advanced Math and Measure History Mode Waveform Playback
Capture many fast pulses in quick Use automatic measurement Scroll back in time to isolate
succession or events separated by parameters with statistics and anomalies that have previously
long periods of time. histicons as well as math functions to been captured to quickly find the
understand every waveform detail. source of the problem.

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 HDO4000 - High Definition Oscilloscope

HDO4000 High Definition Oscilloscopes

combine Teledyne LeCroy’s HD4096
high definition technology with long
memory and powerful debug tools in a
compact form factor with a 12.1” touch 2
screen display.

1. Only 13 cm (5”) Deep – The most

space-efficient oscilloscope for your
bench from 200 MHz to 1 GHz

2. 12.1” Widescreen (16 x 9) high resolution

WXGA color touch screen display. The most
time-efficient user interface is even easier to
use with a built-in stylus

3. Local language user interface – Select from

10 language preferences. Add a front panel
overlay with your local language

4. “Push” Knobs – All knobs have push

functionality that provides shortcuts to
common actions such as Set to Variable, Find
Trigger Level, Zero Offset, and Zero Delay

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 5. Waveform Control Knobs – Control channel,
zoom, math and memory traces with the
multiplexed vertical and horizontal knobs

6. Dedicated Cursor Knob – Select type of cursor,

position them on your signal, and read values
3
without ever opening a menu

7. Dedicated buttons to quickly access popular

debug tools.

8. Easy connectivity with two convenient USB

4
ports on the front, two on the side

9. Rotating and Tilting Feet provide 4 different

viewing positions

10. Auxiliary Output and Reference Clock

5 Input/Output connectors for connecting to
6 other equipment

11. USBTMC (Test and Measurement Class) port

simplifies programming

10 11

9 Document and Share:

• Quickly save all files with LabNotebook
• Create custom reports with LabNotebook
• Save to internal solid state or network drive
• Print to a USB printer
• Save to USB memory stick
• Connect with LAN or GPIB
• View data on a PC with free WaveStudio utility

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 Identify and Isolate Problems Faster

Advanced Waveform Capture

with Sequence Mode
Use Sequence mode to store up to
10,000 triggered events as “segments”
into memory. This can be ideal when
capturing many fast pulses in quick
succession or when capturing events
separated by long time periods.
Sequence mode provides timestamps
for each acquisition and minimizes
dead-time between triggers to less
than 1 μ­s. Combine Sequence mode
with advanced triggers to isolate rare
events over time and analyze afterwards.

WaveScan Advanced Search Advanced Math and Measure

WaveScan provides powerful isolation capabilities that hard- With math functions including
ware triggers can’t provide. WaveScan provides the ability averaging, enhanced resolution and
to locate unusual events in a single capture (i.e., capture and FFT plus a wide variety of measure-
search), or “scan” for an event in many acquisitions over a ment parameters the HDO4000 can
long period of time with more than 20 search modes. measure and analyze every aspect of a
waveform. By utilizing HD4096 technol-
Since the scanning “modes” are not hours or days, enabling faster ogy, the HDO4000 measures 16 times
simply copies of the hardware ­trig­gers, debugging. When used in multiple more precisely than traditional 8-bit
the utility and ­capa­bility is much higher. acquisitions, WaveScan builds on the architectures. Beyond just measuring
For instance, there is no “frequency” ­traditional Teledyne LeCroy strength waveforms, the HDO4000 provides
trigger in any oscilloscope, yet of fast ­processing of data. Quickly scan statistics, histicons and trends to show
­WaveScan allows for “frequency” millions of events looking for unusual how waveforms change over time.
to be quickly “scanned.” This allows occurrences, and do it much faster
the user to accumulate a data set of and more efficiently than other
unusual events that are separated by oscilloscopes can.

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 History Mode Waveform Playback
Scroll back in time using History Mode to view previous waveforms and isolate anomalies. Use cursors and
measurement parameters to quickly find the source of problems. History mode is always available with a
single button press, no need to enable this mode and never miss a waveform.

Go Back in Time to Identify the Source of a Problem

LabNotebook
The LabNotebook feature of HDO4000 provides a report generation tool to save and document all your work. Saving all
displayed waveforms, relevant settings, and screen images is all done through LabNotebook, eliminating the need to navigate
multiple menus to save all these files independently.

One-touch Functionality Save You

ork r Work
ent Your W
m Reca
Docu ll Jo
bs
print
er
Waveform
FLASHBACK
FLASHBACK
FLASHBACK

V/div
Hard Drive T/div
Memory Length
Sample Rate
Measurement
usb Drive Math
oscilloScope Set Up

email

LabNotebook

Screen Dump

Easy report generation helps LabNotebook adds a simple way to Quickly save all the Recall your settings
you share your findings and report your work and save all essential necessary files with from any report
communicate important results. waveforms, settings, and screen images. LabNotebook in a by using the
single button press. Flashback capability.

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 Spectrum Analyzer Mode

Key Features

• Spectrum analyzer style controls

for the oscilloscope

• Select from six vertical scales

• Automatically identify frequency

peaks

• Display up to 20 markers, with

interactive table readout of
frequencies and levels

• Easily make measurements with

reference and delta markers

• Automatically identify and

mark fundamental frequency Simplify Analysis of FFT Power Spectrum
and harmonics
Get better insight to the frequency content of any signal with use of the
• Spectrogram shows how spectra Spectrum Analyzer mode on the HDO4000. This mode provides a spectrum
changes over time in 2D or analyzer style user interface with controls for start/stop frequency or center
3D views frequency and span. The resolution bandwidth is automatically set for best
analysis or can be manually selected. Vertical Scale can be selected as dBm,
dBV, dBmV, dBuV, Vrms or Arms for proper viewing and analysis while the
unique peak search automatically labels spectral components and presents
frequency and level in an interactive table. Utilize up to 20 markers to
automatically identify harmonics and quickly analyze frequency content by
making measurements between reference and delta markers. To monitor
how the spectrum changes over time, view the spectrogram which can
display a 2D or 3D history of the fequency content.

Spectrum analyzer style controls simplify waveform analysis in the frequency domain.

10

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 power Analyzer option

Key Features

• Quickly analyze power conversion

circuits

• Automatic switching device

measurements

• Color coded overlay to identify

power losses

• Control loop and time domain

response analysis

• Line power and harmonics tests

to IEC 61000-3-2

Power Analyzer Automates Switching Device Loss Measurements

Quickly measure and analyze the operating characteristics of power conversion
devices and circuits with the Power Analyzer option. Critical power switching
device measurements, control loop modulation analysis, and line power har-
monic testing are all simplified with a dedicated user interface and automatic
measurements. Areas of turn-on, turn-off, and conduction loss are all identified
Teledyne LeCroy has a variety of
with color-coded waveform overlays for faster analysis. probes and probing accessories such
as high common mode rejection ratio
Power Analyzer provides quick and easy setup of voltage and current inputs
(CMRR) differential amplifiers,
and makes measurements as simple as the push of a button. Tools are differential probes, current probes,
and deskew fixtures.
provided to help reduce sources of measurement errors and the measurement
parameters provide details of single cycle or average device power losses.
Beyond the advanced power loss measurement capabilities,
the Power Analyzer modulation analysis
capabilities provide insight to
understand control loop
response to critical events such
as a power supply’s soft start
performance or step response
to line and load changes. The
Line Power Analysis tool allows
simple and quick pre-compli-
ance testing to EN 61000-3-2.

11

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 Serial Trigger and Decode Options

Debugging serial data busses can Protocol decoding is shown directly Supported Serial Data
be confusing and time consuming. on the waveform with an intuitive, Protocols
The serial data trigger and decode color-coded overlay and presented • I2C, SPI, UART
options for HDO4000 provide time in binary, hex or ASCII. Decoding
• CAN, LIN, FlexRay™, SENT
saving tools for serial bus debug and on the HDO4000 is fast even with
validation. long memory and zooming in to the
• USB 1.0/1.1/2.0, USB 2.0-HSIC
The serial data trigger will quickly waveform shows precise byte by byte • Audio (I2S, LJ, RJ, TDM)
isolate events on a bus eliminating decoding. • MIL-STD-1553, ARINC 429
the need to set manual triggers and To further simplify the debug process • MIPI D-PHY, DigRF 3G, DigRF v4
hoping to catch the right information. all decoded data can be displayed in
Trigger conditions can be entered a table below the waveform grid.
in binary or hexadecimal formats Selecting an entry in the table with
and conditional trigger capabilities the touch screen will display just
even allow triggering on a range of that event. Additionally, built-in
different events. search functionality will find specific
decoded values.

View decoded protocol information on top of physical layer waveforms and trigger on protocol specific messages.

12

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 probes

The right probe is an essential tool for accurate signal capture and Teledyne LeCroy offers an extensive range of
probes to meet virtually every probing need.

ZS Series High Impedance The ZS Series probes provide high impedance and an
Active Probes extensive set of probe tips and ground accessories to
ZS2500, ZS1500, ZS1000, handle a wide range of probing scenarios. The high
ZS2500-QUADPAK, 1 MΩ input resistance and low 0.9 pF input capacitance
ZS1500-QUADPAK, mean this probe is ideal for all frequencies. The ZS Series
ZS1000-QUADPAK
probes provide full system bandwidth for all Teledyne
LeCroy oscilloscopes having bandwidths of 1 GHz
and lower.

Differential Probes High bandwidth, excellent common-mode rejection ratio

(200 MHz – 1.5 GHz) (CMRR) and low noise make these ­active differential
ZD1500, ZD1000, ZD500, probes ideal for applications such as automotive
ZD200 development (e.g. FlexRay) and failure analysis, as well
as wireless and data communication design. The ProBus
interface ­allows sensitivity, offset and common-mode
range to be displayed on the oscilloscope screen.

High Voltage Low cost active differential probes are intended for
Differential Probes measuring higher voltages. The ­differential techniques
ADP305, ADP300, AP031 employed permit measurements to be taken at two
points in a circuit without reference to the ground,
allowing the oscilloscope to be safely grounded without
the use of opto-isolators or isolating transformers.

High Voltage The PPE Series includes five fixed-attenuation probes

Passive Probes covering a range from 2 kV to 20 kV, and one switchable
PPE1.2KV, PPE20KV, probe providing ÷10/÷100 attenuation for voltage inputs
PPE2KV, PPE4KV, PPE5KV, up to 1.2 kV. All fixed-attenuation, standard probes
PPE6KV automatically rescale compatible Teledyne LeCroy
oscilloscopes for the ­appropriate attenuation of the probe.

Current Probes Available current probes reach bandwidths of 100 MHz,

CP031, CP030, AP015, peak currents of 700 A and ­sensitivities of 10 mA/div. Use
CP150, CP500, DCS015 multiple current probes to make measurements on three-
phase systems or a single current probe with a voltage
probe to make instantaneous power measurements.
Teledyne LeCroy current probes enable the design and
testing of switching power supplies, motor drives, electric
vehicles, and uninterruptible power supplies.

13

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 specifications

HDO4022 HDO4024 HDO4032 HDO4034 HDO4054 HDO4104

Vertical
Bandwidth (@ 50Ω) 200 MHz 350 MHz 500 MHz 1 GHz
Rise time 1.75 ns typical 1 ns typical 700ps typical 350 ps typical
Input Channels 2 4 2 4 4 4
Vertical Resolution 12-bits; up to 15-bits with enhanced resolution (ERES)
Sensitivity 50 Ω: 1mV/div - 1 V/div; 1 MΩ: 1 mV/div - 10 V/div
DC Gain Accuracy ±(0.5%) Full Scale, offset at 0 V
BW Limit 20 MHz, 200 MHz
Maximum Input Voltage 50 Ω: 5 Vrms; 1 MΩ: 400 V max (DC + Peak AC ≤ 10 kHz)
Input Coupling 50 Ω: DC, GND; 1 MΩ: AC, DC, GND
Input Impedance 50 Ω ±2.0%, 1 MΩ ±2.0% || 15 pF
Offset Range 50 Ω: 1 mV - 4.95 mV: ±1.6 V, 5 mV - 9.9 mV: ±4 V, 10 mV - 19.8 mV: ±8 V, 20 mV - 1 V: ±10 V
1 MΩ: 1 mV - 4.95 mV: ±1.6 V, 5 mV - 9.9 mV: ±4 V, 10 mV - 19.8 mV: ±8 V, 20 mV - 100 mV: ±16 V,
  102 mV - 198 mV: ±80V, 200 mV - 1 V: ±160 V, 1.02 V -10 V: ±400 V
Offset Accuracy ±(1.0% of offset value + 0.5%FS + 0.02% of max offset + 1 mV)

Acquisition
Sample Rate (Single-shot) 2.5 GS/s
Sample Rate (Repetitive) 125 GS/s
Record Length Standard -STD: 12.5 Mpts/ch (all channels) 25 Mpts (interleaved)
Optional -L: 25 Mpts/ch (all channels), 50 Mpts (interleaved)
Acquisition Modes Real Time, Roll, RIS (Random Interleaved Sampling),
Sequence (Segmented Memory up to 10,000 segments with 1μs intersegment time)
Timebase Range 20 ps/div–10000 s/div; RIS available at ≤ 10 ns/div; Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s
Timebase Accuracy ±2.5 ppm for 5 to 40C + 1.0 ppm/year from calibration

Trigger System
Modes Auto, Normal, Single, Stop
Sources Any input channel, External, Ext/10, or line; slope and level unique to each source (except for line trigger)
Coupling DC, AC, HFREJ, LFREJ
Pre-trigger Delay 0-100% of full scale
Post-trigger Delay 0-10,000 Divisions
Hold-off 2ns up to 20s or 1 to 1,000,000,000 events
Internal Trigger Level Range ±4.1 Divisions
External Trigger Level Range Ext: ±400mV, Ext/10: ±4V
Trigger Types Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV–720p, 1080i, 1080p), Runt, Slew Rate,
Interval (signal or Pattern), Dropout, Qualified (State or Edge)

Measure, Zoom and Math Tools

Measurement Parameters Up to 8 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base (Low),
Delay, Delta Period @ Level, Delta Time @ Level, Duty, Duty @ Level, Edge @ Level, Fall Time (90%–10%),
Fall Time (80%–20%), Frequency, Frequency @ level, Maximum, Mean, Minimum, Overshoot+, Overshoot-,
Peak-Peak, Period, Period @ Level, Phase, Rise Time (10%–90%), Rise Time (20%–80%), RMS, Skew,
Standard Deviation, Time @ Level, Top (High), Width+, Width-. Statistics and Histicons can be added to any
measurement and all measurements can be gated.
Zooming Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area.
Math Functions Functions include Sum, Difference, Product, Ratio, Absolute Value, Averaging (summed and continuous), Derivative,
Envelope, Enhanced Resolution (to 15-bits), Floor, Integral, Invert, Reciprocal, Rescale (change scale and units), Roof,
Square, Square Root, Trend, Zoom and FFT (up to 1 Mpts with power spectrum output and rectangular, VonHann, and
FlatTop windows). 2 dual operator math functions may be defined at a time.

14

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 specifications

HDO4022 HDO4024 HDO4032 HDO4034 HDO4054 HDO4104

Probes
Standard Probes One PP017 (5mm) per channel One PP018(5mm) per channel
Probing System BNC and Teledyne LeCroy ProBus for Active voltage, current and differential probes

Display System
Display Size 12.1” Wide TFT-LCD Touch-Screen
Display Resolution 1280 x 800

Connectivity
Ethernet Port (2) 10/100/1000Base-T Ethernet interface (RJ-45 connector)
USB Host Ports (6) USB Ports Total – (2) Front USB Ports
USB Device Port (1) USBTMC
GPIB Port (Optional) Supports IEEE – 488.2
External Monitor Port Standard 15-pin D-Type SVGA-compatible DB-15 connector, DVI connector and HDMI connector
Remote Control Via Windows Automation, or via Teledyne LeCroy Remote Command Set

Processor/CPU
Type Intel B810 Celeron processor 1.6 GHz or better
Processor Memory 2 GB Standard
Operating System Windows Embedded Standard 7 64-Bit
Disk Type Solid State Drive 64 GB or greater

Power Requirements
Voltage 100-240 VAC + 10% at 45-440 Hz; Automatic AC Voltage Selection
Power Consumption (Nominal) 200 W / 200 VA
Max Power Consumption Max Power Consumption 320 W / 320 VA (with all PC peripherals and active probes connected to 4 channels)

Environmental
Temperature Operating: 5 °C to 40 °C; Non-Operating: -20 °C to 60 °C
Humidity Operating: 5% to 90% relative humidity (non-condensing) up to +31 °C, Upper limit derates to 50% relative humidity
(non-condensing) at +40 °C; Non-Operating: 5% to 95% relative humidity (non-condensing) as tested per
MIL-PRF-28800F
Altitude Operating: 3,048 m (10,000 ft) max at ≤ 30C; Non-Operating: Up to 12,192 meters (40,000 ft)

Physical
Dimensions (HWD) 11.48”H x 15.72”W x 5.17“D (291.7 mm x 399.4 mm x 131.31 mm)
Weight 5.86 kg (12.9 lbs)

Regulatory
CE Certification Low Voltage Directive 2006/95/EC
EN 61010-1:2010, EN 61010-2-030:2010

EMC Directive 2004/108/EC

EN 61326-1:2006, EN61326-2-1:2006
UL and cUL Listing UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition)
CAN/CSA C22.2 No.61010-1-12

15

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]

 ordering information
Product Description Product Code Product Description Product Code
HDO 4000 Oscilloscopes Serial Data Options (cont’d)
200 MHz, 2.5 GS/s, 2 Ch, 12.5 Mpts/Ch 12-bit HD HDO4022 FlexRay Trigger and Decode Option HDO4K-FlexRaybus TD
Oscilloscope with 12.1" WXGA Touch Display SENT Decode Option HDO4K-SENTbus D
200 MHz, 2.5 GS/s, 4 Ch, 12.5 Mpts/Ch 12-bit HD HDO4024 MIL-STD-1553 Trigger and Decode Option HDO4K-1553 TD
Oscilloscope with 12.1" WXGA Touch Display ARINC 429 Symbolic Decode Option HDO4K-ARINC429bus DSymbolic
350 MHz, 2.5 GS/s, 2 Ch, 12.5 Mpts/Ch 12-bit HD HDO4032 USB 2.0 Trigger and Decode Option HDO4K-USB2bus TD
Oscilloscope with 12.1" WXGA Touch Display USB2-HSIC Decode Option HDO4K-USB2-HSICbus D
350 MHz, 2.5 GS/s, 4 Ch, 12.5 Mpts/Ch 12-bit HD HDO4034 D-PHY Decode Option HDO4K-DPHYbus D
Oscilloscope with 12.1" WXGA Touch Display DigRF 3G Decode Option HDO4K-DigRF3Gbus D
500 MHz, 2.5 GS/s, 4 Ch, 12.5 Mpts/Ch 12-bit HD HDO4054 DigRF v4 Decode Option HDO4K-DigRFv4bus D
Oscilloscope with 12.1" WXGA Touch Display Audiobus Trigger and Decode Option for HDO4K-Audiobus TD
1 GHz, 2.5 GS/s, 4 Ch, 12.5 Mpts/Ch 12-bit HD HDO4104 I2S, LJ, RJ, and TDM
Oscilloscope with 12.1" WXGA Touch Display

Included with Standard Configuration Probes and Amplifiers

250 MHz Passive Probe for HDO4000 and PP017
÷10 Passive Probe (Total of 1 Per Channel), Getting Started Guide,
HDO6000, 10:1, 10 MOhm
Anti-virus Software (Trial Version), Microsoft Windows Embedded Standard
7 P 64-Bit License, Commercial NIST Traceable Calibration with 500 MHz Passive Probe for HDO4000 and PP018
Certificate, Power Cable for the Destination Country, 3-year Warranty HDO6000, 10:1, 10 MOhm
Set of 4 ZS1500, 1.5 GHz, 0.9 pF, 1 MΩ ZS1500-QUADPAK
Memory Option High Impedance Active Probe
25 Mpts/CH (50 Mpts interleaved) memory HDO4K-L Set of 4 ZS1000, 1 GHz, 0.9 pF, 1 MΩ ZS1000-QUADPAK
High Impedance Active Probe
Hardware Options 200 MHz, 3.5 pF, 1 MΩ Active Differential Probe ZD200
Removable Solid State Drive Package (includes HDO4K-RSSD 500 MHz, 1.0 pF, 1 MΩ Active Differential Probe ZD500
removable solid state drive kit and two hard drives 1 GHz, 1.0 pF, 1 MΩ Active Differential Probe ZD1000
Additional Removable Solid State Drive HDO4K-RSSD-02 1.5 GHz, 1.0 pF, 1 MΩ Active Differential Probe ZD1500
1,400 V, 100 MHz High-Voltage Differential Probe ADP305
General Accessories 1,400 V, 20 MHz High-Voltage Differential Probe ADP300
External GPIB Accessory USB2-GPIB 1 Ch, 100 MHz Differential Amplifier DA1855A
Soft Carrying Case HDO4K-SOFTCASE with Precision Voltage Source
Rack Mount Accessory HDO4K-RACK 30 A; 100 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse CP031
Accessory Pouch HDO4K-POUCH 30 A; 50 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse CP030
30 A; 50 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse AP015
Local Language Overlays 150 A; 10 MHz Current Probe – AC/DC; 150 Arms; 500 Apeak Pulse CP150
German Front Panel Overlay HDO4K-A-FP-GERMAN
500 A; 2 MHz Current Probe – AC/DC; 500 Arms; 700 Apeak Pulse CP500
French Front Panel Overlay HDO4K-A-FP-FRENCH
10:1/100:1 200/300 MHz, 50 MΩ High-voltage Probe PPE1.2KV
Italian Front Panel Overlay HDO4K-A-FP-ITALIAN 600 V/1,2 kV Max. Volt. DC
Spanish Front Panel Overlay HDO4K-A-FP-SPANISH 100:1 400 MHz 50 MΩ 2 kV High-voltage Probe PPE2KV
Japanese Front Panel Overlay HDO4K-A-FP-JAPANESE 100:1 400 MHz 50 MΩ 4 kV High-voltage Probe PPE4KV
Korean Front Panel Overlay HDO4K-A-FP-KOREAN 1000:1 400 MHz 50 MΩ 5 kV High-voltage Probe PPE5KV
Chinese (Tr) Front Panel Overlay HDO4K-A-FP-CHNES-TR 1000:1 400 MHz 50 MΩ 6 kV High-voltage Probe PPE6KV
Chinese (Simp) Front Panel Overlay HDO4K-A-FP-CHNES-SI 1000:1 100 MHz 50 MΩ 6 kV High-voltage Probe PPE20KV
Russian Front Panel Overlay HDO4K-A-FP-RUSSIAN 20 kV Max. Volt DC + 40 kVPeak AC

Software Options Customer Service

Electrical Telecom Mask Test Package HDO4K-ET-PMT Teledyne LeCroy oscilloscopes and probes are designed, built, and
Spectrum Analysis Option HDO4K-SPECTRUM tested to ensure high reliability. In the unlikely event you experience
Power Analysis Option HDO4K-PWR difficulties, our digital oscilloscopes are fully warranted for three years
and our probes are warranted for one year. This warranty includes:
Serial Data Options
• No charge for return shipping
I2C, SPI and UART Trigger and Decode Option HDO4K-EMB
I2C Bus Trigger and Decode Option HDO4K-I2Cbus TD • Long-term 7-year support
SPI Bus Trigger and Decode Option HDO4K-SPIbus TD • Upgrade to latest software at no charge
UART and RS-232 Trigger and Decode Option HDO4K-UART-RS232bus TD
CAN, LIN and FlexRay Trigger and Decode Option HDO4K-AUTO
LIN Trigger and Decode Option HDO4K-LINbus TD
CAN TD Trigger and Decode Option HDO4K-CANbus TD

1-800-5-LeCroy Local sales offices are located throughout the world.

teledynelecroy.com Visit our website to find the most convenient location.
© 2012 Teledyne LeCroy. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice. hdo4k-ds-23oct12
Product or brand names are trademarks or requested trademarks of their respective holders.

Quality Teledyne Lecroy Products Online at: www. GlobalTestSupply.com [email protected]