1-22-08 0 / Exp lo s io n/flame p ro o f s ignals
BExH120 'Belltronic' Explosion
Proof Bell
The flameproof BExH120 Belltronic Signalling Bell is suitable for Zone 1, 2, 21
& 22 applications. Approved to IECEx, ATEX, Ex EAC and INMETRO standards. .
The BExH120 authentically reproduces the traditional sound of a electro-
mechanical bell whilst providing a significantly higher level of performance
and reliability.
The digitally sto red bell reco rding is o utput via a class D amplifier achieving so und levels
exceeding the perfo rmance o f a mechanical bell whilst o ffering a co ntinuo usly rated signal. The
radial ho rn design no t o nly physically emulates the traditio nal bell it also replicates the
distributio n o f the audible signal.
Features
Marine grade, corrosion proof, LM6 aluminium enclosure.
Ingress protection IP66/67
Stainless steel fixings
Dual M20 cable entries – adaptors available.
Stopping plug included.
Reverse polarity diode fitted.
Digitally stored mechanical bell sound.
Continuously rated.
Maintenance free.
Very large termination area.
Ratchet adjustable stainless steel ‘U’ bracket.
Ap p ro vals
IECEx KEM 10.0003X
ATEX KEMA 99ATEX6312X
TR-CU Ex EAC certificate: RU С-GB.НА65.В.01252_21
INMETRO certificate: 10-IEx-0009
C o d ing
II 2G Ex db IIB T4 Ta -50° to +70°C
II 2G Ex db IIC T4 Ta -50° to +55°C
II 2D Ex tb IIIC T100°C Db Ta -50°C to +55°C
II 2D Ex tb IIIC T115°C Db Ta -50°C to +70°C
S p ecif icatio n Part C o d es
Nominal output: 106dB(A) @ 1m +/- 3dB [97dB(A) @ 10ft/3m] Ver si on : P ar t c od e:
Volume control: Yes Product type: BExH120 Explosion proof Belltronic
Voltages DC: 24vdc Type: DR Ex d, Radial omni-directional horn
Voltages AC: 115vac; 230vac Voltage: DC024 24V dc
AC115 115V ac
Stage switching: Negative AC230 240V ac
Ingress protection: IP66/67 Cable Entry Type: A 2 x M20x1.5mm
Enclosure matl: Marine grade copper free LM6 Aluminium [e] B 2 × 1/2" NPT – adaptors
C 2 × 3/4" NPT – adaptors
Enclosure finish: Chromate & powder coated finish – anti-corrosion. D 2 x M25x1.5mm – adaptors
Colour: RAL3000 Red E 1 × 1/2" NPT – adaptor
Grey RAL7038 F 1 × 3/4" NPT – adaptor
Special – available on request G 1 x M25x1.5mm – adaptor
BExH120 horn: High impact UL94 V0 & 5VA FR ABS Adaptor/Stopping B Brass
plug material: [m] N Nickel Plated
Cable entries: Dual M20 ISO (one stopping plug inc) S Stainless Steel
Terminals: 0.5 – 2.5mm² (20-14 AWG) Bracket matl & tag: 1 A2 304 Stainless Steel
Enclosure volume: <2 litres [s] 2 A4 316 Stainless Steel
3 A2 304 St/St with Equip. Tag
Line monitoring: Blocking diode included 4 A4 316 St/St with Equip. Tag (304)
EOL Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor
or diode (DC versions) can be fitted Product version: [v]A1 Default – IECEx, ATEX, Ex EAC & INMETRO
Relative humidity: 95% – Additional tropicalisation is recommended Enclosure colour: R Red RAL3000
for applications where both high relative humidity [x] G Grey RAL7038
and high ambient temperatures exist S Special – contact E2S
Weight : DC: 3.20kg/7.04Ibs AC: 3.40kg/7.48Ibs Accessories: SP65-0001-A2 Pole Mount Bracket Kit 2" St/St A2 (304)
SP65-0001-A4 Pole Mount Bracket Kit 2" St/St A4 (316)
SP65-0003-A2 Sunshade – St/St A2 (304)
SP65-0003-A4 Sunshade – St/St A4 (316)
C urrent C o nsump tio n
Vol tage: Cu r r en t:
24V dc 400mA
115V ac 50/60Hz 130mA
230V ac 50/60Hz 65mA
T o ne tab le
S 1 D e s c ri p t i o n S 2 S 3
T 1 Industrial Hooter T3 T5
T2 High Frequency Mechanical Siren T1 T5
T3 Medium Frequency Mechanical Siren T1 T5
T4 Electro Mechanical Buzzer T2 T5
T5 Mechanical Bell T1 T2
E2 S Warning S ignals s ales @ e2 s .com www.e2 s .com 10 Dec 2021
No liability is accepted for any consequence of the use of this document. The technical specification of this unit is subject to chang e without notice due to our policy of continual product development. All dimensions are approximate. This unit is sold subject to our standard
conditions of sale, a copy of which is available on request.
