STEREO AMPLIFIER z¿<?

/B Direct Energy MOS VOLUME

POWER Î
CD TUNER PHONO LINE TAPE 1 TAPE 2
/CD-R/MD MONITOR

— OFF _ ON

A SPEAKERS B BASS TREBLE BALANCE INPUT SELECTOR

PHONES

– + – +
LOUDNESS

MIN MAX
DIRECT

L R
TAPE 2
MONITOR
ORDER NO.
RRV2283

STEREO AMPLIFIER

A-209R
A-209
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model The voltage can be converted by
Type Power Requirement
A-209R A-209 the following method.
MYXJ – AC220-230V –––––
MVXJ – AC220-230V –––––
MLXJ – AC220-230V –––––
SBDXJ – AC110V/120-127V/220V/240V With the voltage selector

CONTENTS
1. SAFETY INFORMATION ...................................... 2 7. GENERAL INFORMATION ................................ 28
2. EXPLODED VIEWS AND PARTS LIST ............... 3 7.1 DISASSEMBLY ............................................ 28
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM ..... 6 7.2 IC .................................................................. 29
4. PCB CONNECTION DIAGRAM ......................... 16 8. PANEL FACILITIES AND SPECIFICATIONS ....... 30
5. PCB PARTS LIST ............................................... 24
6. ADJUSTMENT .................................................... 27

PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
c PIONEER CORPORATION 2000
Downloaded from www.Manualslib.com manuals search engine T – ZZK APR. 2000 Printed in Japan
 A-209R, A-209

1. SAFETY INFORMATION
This service manual is intended for qualified service technicians ; it is not meant for the casual do-it-
yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained
to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may
void the warranty. If you are not qualified to perform the repair of this product properly and safely, you
should not risk trying to do so and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to cause
cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 – Proposition 65

NOTICE
(FOR CANADIAN MODEL ONLY)
Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacement parts must
be of identical designation.

REMARQUE
(POUR MODÈLE CANADIEN SEULEMENT)
Les symboles de fusible (fusible de type rapide) et/ou (fusible de type lent) sur CCI indiquent que les pièces
de remplacement doivent avoir la même désignation.

(FOR USA MODEL ONLY)

1. SAFETY PRECAUTIONS ANY MEASUREMENTS NOT WITHIN THE LIMITS

OUTLINED ABOVE ARE INDICATIVE OF A POTENTIAL
The following check should be performed for the
continued protection of the customer and service SHOCK HAZARD AND MUST BE CORRECTED BEFORE
technician. RETURNING THE APPLIANCE TO THE CUSTOMER.

LEAKAGE CURRENT CHECK

Measure leakage current to a known earth ground (water 2. PRODUCT SAFETY NOTICE
pipe, conduit, etc.) by connecting a leakage current tester Many electrical and mechanical parts in the appliance
such as Simpson Model 229-2 or equivalent between the have special safety related characteristics. These are
earth ground and all exposed metal parts of the appliance often not evident from visual inspection nor the protection
(input/output terminals, screwheads, metal overlays, control afforded by them necessarily can be obtained by using
shaft, etc.). Plug the AC line cord of the appliance directly replacement components rated for voltage, wattage, etc.
into a 120V AC 60Hz outlet and turn the AC power switch Replacement parts which have these special safety
on. Any current measured must not exceed 0.5mA. characteristics are identified in this Service Manual.
Electrical components having such features are identified
by marking with a on the schematics and on the parts list
Reading should in this Service Manual.
Leakage not be above The use of a substitute replacement component which does
Device current 0.5mA
tester not have the same safety characteristics as the PIONEER
under
test recommended replacement one, shown in the parts list in
Test all this Service Manual, may create shock, fire, or other hazards.
exposed metal Product Safety is continuously under review and new
surfaces
instructions are issued from time to time. For the latest
information, always consult the current PIONEER Service
Manual. A subscription to, or additional copies of, PIONEER
Also test with
plug reversed Earth Service Manual may be obtained at a nominal charge from
(Using AC adapter ground PIONEER.
plug as required)

AC Leakage Test

2
Downloaded from www.Manualslib.com manuals search engine
 A-209R, A-209

2. EXPLODED VIEWS AND PARTS LIST

NOTES: • Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
• The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
• Screws adjacent to mark on the product are used for disassembly.
2.1 PACKING
MVXJ type Only (1) PACKING PARTS LIST
20 16 (SBDXJ
19 type Only)
17 Except Mark No. Description Part No.
MVXJ type
1 Operating Instructions See Contrast table(2)
18 (English)
2 Operating Instructions See Contrast table(2)
(German)
5 15 3 Operating Instructions See Contrast table(2)
(SBDXJ type (French/Italian/Dutch/Swedish/Spanish/Portugese)
6 Only)
12
7 1 (MYXJ and NSP 4 Warranty Card See Contrast table(2)
5 Remote Control Unit (CU-A019) See Contrast table(2)
MVXJ types 6 Battery Cover See Contrast table(2)
Only) NSP 7 Dry Cell Battery (AA/R6P) See Contrast table(2)
2 (MYXJ type
Only) 8 Side Pad L AHA7205
13 9 Side Pad R AHA7206
3 (MYXJ type
Only) 10 Sub Pad AHA7218
8 4 (MYXJ and 11 Packing Case See Contrast table(2)
FR NSP 12 Literature Bag AHG1180
ON MVXJ types
T Only) 13 Packing Sheet AHG7015
10
14 (MLXJ and
SBDXJ types 14 Operating Instructions See Contrast table(2)
Only) (English/Spanish/Chinese)
15 Caution Label 220V See Contrast table(2)
16 AC Plug Adapter See Contrast table(2)
NSP 17 Air Cap See Contrast table(2)
9
18 Power Cord See Contrast table(2)
19 Power Cord with Fuse See Contrast table(2)
20 Fuse (T5A) See Contrast table(2)

11

(2) CONTRAST TABLE

A-209R/MYXJ, MVXJ, A-209/MLXJ and SBDXJ are constructed the same except for the following :
Part No.
Mark No. Symbol and Description A-209R A-209R A-209 A-209 Remarks
/MYXJ /MVXJ /MLXJ /SBDXJ
1 Operating Instructions (English) ARB7236 ARB7236 Not used Not used
2 Operating Instructions (German) ARC7322 Not used Not used Not used
3 Operating Instructions (French/Italian/ ARC7323 Not used Not used Not used
Dutch/Swedish/Spanish/Portuguese)
NSP 4 Warranty Card ARY7022 ARY7022 Not used Not used

5 Remote Control Unit (CU-A019) AXD7193 AXD7193 Not used Not used
6 Battery Cover AZN2249 AZN2249 Not used Not used
NSP 7 Dry Cell Battery (AA/R6P) VEM-013 VEM-013 Not used Not used
11 Packing Case AHD7869 AHD7869 AHD7870 AHD7891
14 Operating Instructions Not used Not used ARE7269 ARE7269
(English/Spanish/Chinese)

15 Caution Label 220V Not used Not used Not used ARR1003
16 AC Plug Adapter Not used Not used Not used VKX1007
NSP 17 Air Cap Not used AHG1087 Not used Not used
18 Power Cord ADG1154 Not used ADG1154 ADG1154
19 Power Cord with Fuse Not used ADG1156 Not used Not used

20 Fuse (T5A) Not used AEK1046 Not used Not used

3
Downloaded from www.Manualslib.com manuals search engine
 A-209R, A-209

2.2 EXTERIOR

39
26

36 39

39
26
39

39
SBDXJ 43
Type Only 39

15
15
8
6 4
35 3 MYXJ,
MVXJ
Types Only 15
1
34
37 15

39
5 7

28 or 44
25 MYXJ, 2
MVXJ
Types Only
18
41 9 17 13 SBDXJ
42
16 Type Only
38
30 11
41 39
27 39 39
39

27 29 47
19 40
23
19

23
31
12
33
22
31 23
32 39 14
46

46 39 17 45 MLXJ,
48 SBDXJ
46 21
49 14
14 MYXJ,
21 39 MVXJ
39

4
Downloaded from www.Manualslib.com manuals search engine
 A-209R, A-209

(1) EXTERIOR PARTS LIST

Mark No. Description Part No. Mark No. Description Part No.
1 FRONT L Assy See Contrast table(2) 26 Screw (3 × 8) PBA1096
2 FRONT R Assy See Contrast table(2) 27 LED Lens AAK2459
3 OPT Assy See Contrast table(2) 28 IR Filter See Contrast table(2)
4 AC PRIMARY Assy See Contrast table(2) 29 LED Lens A AAK7537
NSP 5 HEADPHONE Assy AWX7114 30 Name Plate PAM1776

6 VOLUME Assy See Contrast table(2) 31 Rotary Knob A AAB7148

7 AF Assy See Contrast table(2) 32 Rotary Knob B AAB7149
8 Fuse (FU1) See Contrast table(2) 33 Volume Knob AAB7150
9 Flexible Cable (19P) ADD7032 34 Speaker Button AAD7435
(AF CN202-FRONT R CN601) 35 Power Joint AAD7439
10 •••••
36 Bonnet Case ANE7183
11 Power Transformer (T1) See Contrast table(2) 37 Panel Base AMB7489
NSP 12 Chassis ANA7064 38 Front Panel See Contrast table(2)
13 Rear Panel See Contrast table(2) 39 Screw BBZ30P080FZK
14 Insulator See Contrast table(2) 40 Screw BCZ30P060FCC
15 Screw (3 × 8) ABA1018
41 Nut NK90FUC
16 Screw (3 × 8) ABA1027 42 Voltage Selector (S2) See Contrast table(2)
17 Screw (4 × 10) ABA7047 43 Fuse (FU2, FU3 : 1.25A) See Contrast table(2)
18 Nut ABN-065 44 PVC Cover See Contrast table(2)
19 PCB Support AEC7006 45 Foot See Contrast table(2)
20 •••••
46 Spacer ABF7004
NSP 21 PCB Holder AEC7057 47 Transformer Plate ANG7312
NSP 22 Cord Clamp F AEC7134 NSP 48 Sub Frame ANG7313
23 PCB Mold AMR2533 49 Screw IBZ30P120FCC
24 •••••
NSP 25 Shield Plate See Contrast table(2)

(2) CONTRAST TABLE

A-209R/MYXJ, MVXJ, A-209/MLXJ and SBDXJ are constructed the same except for the following :
Part No.
Mark No. Symbol and Description A-209R A-209R A-209 A-209 Remarks
/MYXJ /MVXJ /MLXJ /SBDXJ
1 FRONT L Assy AWX7123 AWX7123 AWX7122 AWX7122
2 FRONT R Assy AWX7124 AWX7124 AWX7121 AWX7121
3 OPT Assy AWX7125 AWX7125 Not used Not used
4 AC PRIMARY Assy AWX7113 AWX7113 AWX7113 AWX7670
6 VOLUME Assy AWX7118 AWX7118 AWX7112 AWX7112

7 AF Assy AWX7117 AWX7117 AWX7116 AWX7116

8 Fuse (FU1 : 1.25A) REK1023 REK1023 REK1023 Not used
8 Fuse (FU1 : 6.3A) Not used Not used Not used REK1030
11 Power Transformer (AC220-230V) ATS7190 ATS7190 ATS7190 Not used
11 Power Transformer Not used Not used Not used ATS7191
(AC110V/120-127V/220V/240V)

13 Rear Panel ANC7925 ANC7925 ANC7927 ANC7928

14 Insulator PNW2766 PNW2766 AMR7198 AMR7198
NSP 25 Shield Plate ANK7043 ANK7043 Not used Not used
28 IR Filter AAK7532 AAK7532 Not used Not used
38 Front Panel AMB7710 AMB7710 AMB7711 AMB7711

42 Voltage Selector (S2) Not used Not used Not used AKX-507
43 Fuse (FU2, FU3 : 1.25A) Not used Not used Not used REK1023
44 PVC Cover Not used Not used AAK7541 AAK7541
45 Foot Not used Not used REC1263 REC1263

5
Downloaded from www.Manualslib.com manuals search engine
 1 2 3 4
A-209R, A-209

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM

A 3.1 BLOCK DIAGRAM

CN101 IC151
CN102 RIAA
3 1
D ON/OFF
2.8mV
/50kΩ PHONO AF ASSY
37dB
IC101 Q501
TUNER FUNCTION Q503
26 27
Q101 24 24 19 LOUDNESS
CD 17 CN203 CN501
200mV 25
/50kΩ 24 20 12 12
LINE 18
VOLUME
TAPE1 Q103 M VR501
/CD-R
B /MD CN501 1, 2
200mV
/1kΩ REC
CN203 1, 2
200mV TAPE2
/50kΩ MONITOR

Q337-Q340
200mV
/1kΩ REC UP/DOWN

F
FRONT R ASSY
C D Q331, Q327, Q328
FROM UNUSUAL
TO FUNCTION SW
OUTPUT DETECTION D IC101

38 2, 3, 4

KEY INPUTS DIRECT, LOUDNESS ON/OFF

S602, S603 23, 24, 12, 15 A Q501–Q514
E S702–S704 36, 40,
µ-COM
VOLUME UP/DOWN
42
30, 31 D Q337–Q340
FROM FUNCTION SEL FUNC MUTE ON/OFF
IC601
S601
32, 33 17 D Q303

1 37

G 604
D Q334, Q336
SR INPUT TO PROTECTION RY
D

6
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8
A-209R, A-209

A D
VOLUME ASSY AF ASSY

DIRECT DIRECT ENERGY MOS

ON/OFF
POWER AMP
WRLC
39dB
Q505 PROTECTION RY
CN501 CN203 RY401 401
SP-A
8 8 RY402
IC301 SP-B
Q507 Q509 Q309–Q330 RY403

Q303 J551 1
7 CN502 6 B
UNUSUAL
OUTPUT J551 1
FUNC DETECTION H.P
7 J3 6 MUTE
Q331, Q327, Q328 B JA501

TONE HEADPHONE ASSY

6 7
AND
BALANCE
IC751
E
VR751 FRONT L ASSY
VR752
F VR601

D C

AF ASSY
+BL
TO POWER STAGE
–BL D451

TO µ-COM +6
LED
IC453

TO OP AMP +19
IC451
RY
IC452
–15 C
AC PRIMARY ASSY
Q451 T1 S801 FU1
+BH
TO VOLTAGE STAGE REGULATOR
D
–BH
Q452 D452–D455

7
Downloaded from www.Manualslib.com 5manuals search engine 6 7 8
 1 2 3 4
A-209R, A-209

3.2 OVERALL CONNECTION DIAGRAM

A

B F
HEADPHONE ASSY FRONT R ASSY
AWX7114 AWX7124 (MYXJ, MVXJ)
AWX7121 (MLXJ, SBDXJ)

D
AF ASSY
AWX7117 (MYXJ, MVXJ)
AWX7116 (MLXJ, SBDXJ)

451

A
VOLUME ASSY
AWX7118 (MYXJ, MVXJ)
AWX7112 (MLXJ, SBDXJ)

8
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8
A-209R, A-209

Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST".

E
FRONT L ASSY
AWX7123 (MYXJ, MVXJ)
AWX7122 (MLXJ, SBDXJ)

B
AC POWER CORD

C ADG1154 : MYXJ, MLXJ types

G AC PRIMARY ASSY
AWX7113
OPT ASSY (MYXJ, MVXJ, MLXJ)
ADG1156 : MVXJ type

AWX7125 AWX7670
(MYXJ, MVXJ) (SBDXJ)
ADG1154 (VKX1007) : SBDXJ type

MYXJ, MVXJ,
MLXJ types SBDXJ type

POWER TRANSFORMER
ATS7190 : MYXJ, MVXJ, MLXJ (VKX1007)

A-209/SBDXJ

S2 : AKX-507
VOLTAGE
SELECTOR

POWER TRANSFORMER
ATS7191 : SBDXJ

9
Downloaded from www.Manualslib.com 5manuals search engine 6 7 8
 1 2 3 4
A-209R, A-209

3.3 VOLUME and HEADPHONE ASSYS

A

B
HEADPHONE ASSY
AWX7114
D J551A

: AUDIO SIGNAL ROUTE

A VOLUME ASSY
AWX7118 (MYXJ, MVXJ)
AWX7112 (MLXJ, SBDXJ)

J3
C

ACX7038

VR-501 : ACX7038 (MYXJ, MVXJ)

VR-501 : ACS7035 (MLXJ, SBDXJ)

(MYXJ, MVXJ)

D CN203

10 A B
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 1 2 3 4
A-209R, A-209

3.4 AC PRIMARY ASSY

A
• NOTE FOR FUSE REPLACEMENT
CAUTION - FOR CONTINUED PROTECTION AGAINST RISK OF FIRE.
REPLACE WITH SAME TYPE AND RATINGS ONLY.

C AC PRIMARY ASSY
AWX7113 (MYXJ, MVXJ, MLXJ)
AWX7670 (SBDXJ)

MYXJ, MVXJ, MLXJ types

SBDXJ type SBDXJ type

REK1023 POWER
T1.25AL250V
LIVE
S801
ASG1035 TO B
AC POWER
TO POWER MYXJ, CORD
TRANSFORMER MVXJ,
MLXJ types

NEUTRAL

REK1023
T1.25AL250V

A-209/SBDXJ

TO S2
VOLTAGE
SELECTOR

3
C 11
Downloaded from www.Manualslib.com 1manuals search engine 2 4
 1 2 3 4
A-209R, A-209

3.5 AF ASSY
: AUDIO SIGNAL ROUTE

A
1k

AF ASSY
D AWX7117 (MYXJ, MVXJ)
AWX7116 (MLXJ, SBDXJ)

1k

C313,C337 :

B
IDLE ADJ.
(L CH)

C314,C338 :

IDLE ADJ.
(R CH)

MYXJ, MVXJ ONLY

MYXJ, MVXJ ONLY

A CN501
12 D
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8
A-209R, A-209

CAUTION : FOR CONTINUED PROTECTION AGAINST

RISK OF FIRE. REPLACE ONLY WITH
SAME TYPE NO. 491001 MFD, BY
LITTELFUSE INK. FOR IC454 (AEK7009).

ACH7080
C451
(6800/42)
ACH7081
IRF530(S) C452
(6800/42)

TRANSFORMER
B

TO POWER
IRF9530(S)

R361–R366:
IRF530(S)

IRF9530(S) Q333–Q336:
C321–C324:

B J551
F CN601

7
D 13
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4
A-209R, A-209

3.6 FRON L, FRONT R and OPT ASSYS

A
G E FRONT L ASSY
OPT ASSY AWX7123 (MYXJ, MVXJ)
AWX7125 AWX7122 (MLXJ, SBDXJ)
(MYXJ, MVXJ)
MYXJ, MVXJ ONLY

VSG1009

VSG1009
B

VSG1009

C CN502
A
CN202
D

FRONT L ASSY
S702 : LOUDNESS
S703 : SPEAKER A
S704 : SPEAKER B

14 E F G
1 2 3 4
Downloaded from www.Manualslib.com manuals search engine
 5 6 7 8
A-209R, A-209

F
FRONT R ASSY
AWX7124 (MYXJ, MVXJ)
MYXJ, MVXJ ONLY
AWX7121 (MLXJ, SBDXJ)

MYXJ, MVXJ ONLY

B

VSG1009

VSG1009 INPUT
SELECTOR

MYXJ, MVXJ ONLY

FRONT R ASSY
S601 : INPUT SELECTOR
CD
TUNER
PHONE D
LINE
TAPE1/CD-R/MD
S602 : DIRECT
S603 : TAPE2 MONITOR

7
F 15
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4
A-209R, A-209

4. PCB CONNECTION DIAGRAM

4.1 VOLUME ASSY
NOTE FOR PCB DIAGRAMS :
1. Part numbers in PCB diagrams match those in the schematic 3. The parts mounted on this PCB include all necessary parts for
A
diagrams. several destinations.
2. A comparison between the main parts of PCB and schematic For further information for respective destinations, be sure to
diagrams is shown below. check with the schematic diagram.
Symbol In PCB Symbol In Schematic 4. View point of PCB diagrams.
Part Name
Diagrams Diagrams
B C E B C E
Connector Capacitor
Transistor
B C E

B C E B C E SIDE A
Transistor
B C E with resistor

D G S D G S
Field effect
D G S transistor
P.C.Board Chip Part SIDE B

Resistor array
A VOLUME ASSY
B 3-terminal
regulator

E J3

Q513,Q514

SIDE A
VR501

C
(ANP7232-A)
D CN203
A VOLUME ASSY

Q509,Q510

Q507,Q508

Q505,Q506

Q511
SIDE B
Q503,Q502
D
Q501,Q504

16 A 1
Downloaded from www.Manualslib.com 2
manuals search engine 3
(ANP7232-A)

4
 1 2 3 4
A-209R, A-209

4.2 HEADPHONE and AC PRIMARY ASSYS

A

B HEADPHONE ASSY B HEADPHONE ASSY

(ANP7232-A) (ANP7232-A)
SIDE A D J551A SIDE B

C AC PRIMARY ASSY
POWER B
TRANSFORMER

VOLTAGE
SELECTOR
(SBDXJ Type)

SIDE A
AC POWER
CORD

(ANP7232-A)
C
C AC PRIMARY ASSY

SIDE B

(ANP7232-A)

Downloaded from www.Manualslib.com 1manuals search engine 2 3

B C 4
17
 1 2 3 4
A-209R, A-209

4.3 AF ASSY

D AF ASSY

POWER
TRANSFORMER

18 D 1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8
A-209R, A-209
SIDE A

A
Q153

Q341

IC101

IC451-IC453

F CN601
B

Q333-Q336

Q324,Q326

VR302
Q452

IC301
A CN501
Q451

VR301

Q323,Q325

IC454

B J551

Downloaded from www.Manualslib.com 5manuals search engine

(ANP7232-A)

6 7
D 8
19
 1 2 3 4
A-209R, A-209

D AF ASSY
A

20 D1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8
A-209R, A-209
SIDE B

Q151
IC151 A
Q152
Q338,Q337

Q340,Q339

Q102

Q101

Q104

B
Q103

Q332
Q328,Q327

Q318,Q330

Q322,Q320

Q316,Q314
C
Q312,Q310

Q304,Q303
Q311,Q309
Q315,Q313

Q321,Q319

Q317,Q329

Q331,Q343

Downloaded from www.Manualslib.com 5manuals search engine

(ANP7232-A)
6 7
D8
21
 1 2 3 4
A-209R, A-209

4.4 FRONT L ASSY

A
E FRONT L ASSY
G J603A A CN502 F J602

VR751
VR752

Q707
Q708

(ANP7231-A)
B SIDE A

E FRONT L ASSY

IC751,Q701
Q703,Q702
Q705,Q704

(ANP7231-A)
C
SIDE B

22
E
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 1 2 3 4
A-209R, A-209

4.5 FRONT R and OPT ASSYS

F FRONT R ASSY A

IC601

VR601

E J602A D CN202 (ANP7231-A)

SIDE A
F FRONT R ASSY

Q608-Q613
C
Q614-Q616

Q601-Q606

(ANP7231-A)
SIDE B

G OPT ASSY G OPT ASSY

D

E J603
(ANP7231-A) (ANP7231-A)

SIDE A SIDE B

Downloaded from www.Manualslib.com 1manuals search engine 2 3

F G 4
23
 A-209R, A-209

Mark No. Description Part No. Mark No. Description Part No.

5. PCB PARTS LIST

NOTES: • Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
• The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
• When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω → 56 × 101 → 561 ........................................................ RD1/4PU 5 6 1 J
47k Ω → 47 × 103 → 473 ........................................................ RD1/4PU 4 7 3 J
0.5 Ω → R50 ..................................................................................... RN2H R 5 0 K
1Ω → 1R0 ..................................................................................... RS1P 1 R 0 K
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω → 562 × 101 → 5621 ...................................................... RN1/4PC 5 6 2 1 F

LIST OF WHOLE PCB ASSEMBLIES

Part No.
Mark Symbol and Description A-209R A-209R A-209 A-209 Remarks
/MYXJ /MVXJ /MLXJ /SBDXJ
NSP AF COMPLEX ASSY AWM7357 AWM7357 AWM7355 AWM7511
VOLUME ASSY AWX7118 AWX7118 AWX7112 AWX7112
NSP HEADPHONE ASSY AWX7114 AWX7114 AWX7114 AWX7114
AC PRIMARY ASSY AWX7113 AWX7113 AWX7113 AWX7670
AF ASSY AWX7117 AWX7117 AWX7116 AWX7116

NSP CONTROL ASSY AWG7013 AWG7013 AWG7012 AWG7012

FRONT L ASSY AWX7123 AWX7123 AWX7122 AWX7122
FRONT R ASSY AWX7124 AWX7124 AWX7121 AWX7121
OPT ASSY AWX7125 AWX7125 Not used Not used

Mark No. Description Part No. Mark No. Description Part No.

A VOLUME ASSY OTHERS

CN501 16P SOCKET KP200TA16L
(1) CONTRAST TABLE
CN502 CONNECTOR 7P KPE7
AWX7118 and AWX7112 are constructed the same except PCB BINDER VEF1040
for the following :
Part No.
Mark Symbol and Description

C511
AWX7118 AWX7112
CKSQYF473Z50 Not used
Remarks
B HEADPHONE ASSY
VR501 ACX7038 ACS7035 CAPACITORS
C551,C552 CKSQYB392K50
(2) PARTS LIST FOR AWX7118
SEMICONDUCTORS OTHERS
Q513,Q514 2SK246 3P CABLE HOLDER 51063-0305
Q501-Q510 2SK303 J552 CORD WITH PLUG DE005WE0
Q511 DTC124EK JA501 HEADPHONE JACK RKN1002
D505,D506,D509,D510 1SS352 J551 JUMPER WIRE D15A03-150-2651
D501-D504,D507,D508 1SS355

CAPACITORS
C501,C502 CCSQCH271J50
C AC PRIMARY ASSY
C513,C514 CEAT100M50 (1) CONTRAST TABLE
C516 CEAT330M25 AWX7113 and AWX7670 are constructed the same except
C503,C504 CFTYA473J50 for the following :
C515 CKCYF103Z50
Part No.
Mark Symbol and Description Remarks
C511 CKSQYF473Z50 AWX7113 AWX7670
H3-H6 FUSE CLIP Not used AKR7001
NSP J806 Not used DB616EB0
RESISTORS
R530 RS1/10S100J (2) PARTS LIST FOR AWX7113
VR501 ACX7038
Other Resistors RS1/10S J SWITCH
S801 ASG1035

24
Downloaded from www.Manualslib.com manuals search engine
 A-209R, A-209

Mark No. Description Part No. Mark No. Description Part No.
D461 S5566G(TPB2)
CAPACITORS D311,D312 UDZ15B
C801,C802 (0.01µF/AC250V) ACG7020 D457,D458 UDZ36B
D456 UDZ4.7B
OTHERS D341 UDZS5.1B
CN801 AC INLET AKP7005
H1,H2 FUSE CLIP AKR7001 D462 UDZS5.6B

RELAYS
D AF ASSY RY401-RY403 ASR7014

(1) CONTRAST TABLE CAPACITORS

AWX7117 and AWX7116 are constructed the same except C451 (6800µF/42V) ACH7080
for the following : C452 (6800µF/42V) ACH7081
C313-C316,C337-C340 CCSQCH121J50
Part No. C153,C154 CCSQCH151J50
Mark Symbol and Description Remarks
AWX7117 AWX7116 C303,C304 CCSQCH221J50
Q337, Q338 2SA1162 Not used
Q339, Q340 2SC2712 Not used C334 CEANP100M16
Q341 2SC5174P Not used C471 CEANP1R0M2A
D341 UDZS5.1B Not used C172 CEANP1R0M50
C334 CEANP100M16 Not used C333 CEANP470M10
C155,C156,C167,C168 CEAT100M50
C335, C336 CEAT100M50 Not used
C472 CKSQYF473Z50 Not used C317-C320,C335,C336 CEAT100M50
R385–R388 RS1/10S473J Not used C453-C458,C465,C466,C469 CEAT100M50
R389, R390 RS1/10S471J Not used C461,C462 CEAT101M2A
R391, R392 RS1/10S102J Not used C467,C468 CEAT1R0M50
C470 CEAT3R3M50
R393 RS1/10S153J Not used
R460 RS1/10S2R2J Not used C169,C170 CEAT470M25
JA401REMOTE CONTROL JACK RKN1004 Not used C459,C460,C463,C464 CEAT470M50
C157,C158 CEAT471M6R3
(2) PARTS LIST FOR AWX7117 C301,C302,C305,C306 CEBA100M50
SEMICONDUCTORS C307,C308 CEBA221M25
IC454 (1A) AEK7009
C321-C324 CFTYA224J50
IC453 BA178M06T
C173 CFTYA564J50
IC451 BA178M15T
C165,C166 CKSQYB222K50
IC452 NJM79M15FA
C111-C113,C171,C341 CKSQYF473Z50
IC101 TC9163AN
C472 CKSQYF473Z50
IC301 UPC4570C
C159,C160 CQMA243J50
IC151 UPC4570G2
C161,C162 CQMBA823J50
Q311,Q312,Q329,Q330 2SA1162
Q337,Q338 2SA1162
Q313,Q314,Q321,Q322 2SA1255 RESISTORS
R311,R312 RDR1/4VM152J
Q452 2SA1837 R301,R302 RDR1/4VM240J
Q309,Q310,Q327,Q328 2SC2712 R303,R304 RDR1/4VM561J
Q339,Q340 2SC2712 R143 RS1/10S100J
Q315,Q316,Q319,Q320 2SC3138 R133,R134,R171,R172 RS1/10S101J
Q303,Q304 2SC3326
R351-R354,R452 RS1/10S101J
Q451 2SC4793 R317,R318,R331,R332 RS1/10S122J
Q341 2SC5174P R357-R360 RS1/10S151J
Q101-Q104 2SK303 R377,R378,R453 RS1/10S153J
Q151 DTA124EK R465-R470 RS1/10S161J
Q152 DTC124EK
R361-R366 RS1/10S1R5J
Q153 DTC124ES R339-R346 RS1/10S221J
Q331,Q332,Q343 DTC143EK R454 RS1/10S273J
Q333-Q336 DTC143ES R460 RS1/10S2R2J
Q317,Q318 IMX1 R355,R356 RS1/10S432J
Q323,Q324 IRF530(S)
R459 RS1/10S470J
Q325,Q326 IRF9530(S) R464 RS1/10S4R7J
D101-D104,D151,D301-D310 1SS355 R379,R380 RS1/10S682J
D401-D404 1SS355 R451 RS1LMF270J
D451 D5SBA20 R401,R402 RS1LMF331J
D452-D455,D459,D460 S5566G(TPB2)

25
Downloaded from www.Manualslib.com manuals search engine
 A-209R, A-209

Mark No. Description Part No. Mark No. Description Part No.
R461-R463 RS1LMF390J
R403 RS1LMF821J
OTHERS
R373-R376 RS1LMFR22J 3P CABLE HOLDER 51063-0305
VR301,VR302 (2.2kΩ) VCP1123 7P CABLE HOLDER 51063-0705
Other Resistors RS1/10S J 13P CABLE HOLDER 51063-1305
J603 JUMPER WIRE D15A03-100-2651
J3 JUMPER WIRE D15A07-200-2651
OTHERS
3P CABLE HOLDER 51063-0305
SCREW ABA1007
SCREW
CN101,CN102 8P PIN JACK
ABA1052
AKB7023
F FRONT R ASSY
8P SPEAKER TERMINAL AKE1011
(1) CONTRAST TABLE
AWX7124 and AWX7121 are constructed the same except
HEAT SINK M ANH-813 for the following :
HEAT SINK B ANH1021
CN202 FFC CONNECTOR 19P HLEM19S-1 Part No.
Mark Symbol and Description Remarks
CN203 16P PLUG KM200TA16 AWX7124 AWX7121
JA401 REMOTE CONTROL JACK RKN1004 D614, D616, D621 1SS355 Not used
C611 CKSQYF103Z50 Not used
PCB BINDER VEF1040 R623 RS1/10S102J Not used
KN101,KN201,KN301,KN451 VNF1084
EARTH METAL FITTING (2) PARTS LIST FOR AWX7124
SEMICONDUCTORS
IC601 PD5443A
E FRONT L ASSY Q609
Q610
2SA1162
2SC2712
(1) CONTRAST TABLE Q611-Q613,Q615,Q616 DTA124EK
AWX7123 and AWX7122 are constructed the same except Q601-Q606,Q608,Q614 DTC124EK
for the following : D608-D612,D614-D621 1SS355
Part No. D607 SLP6118C51H
Mark Symbol and Description Remarks D601-D606 SLP9118C51H
AWX7123 AWX7122
Q704 DTC124EK Not used
Q705 2SC2712 Not used SWITCHES
D704 1SS355 Not used S602,S603 VSG1009
R708 RS1/10S472J Not used S601 ASX7008
R709 RS1/10S223J Not used

J603 JUMPER WIRE D15A03-100-2651 Not used CAPACITORS

1603 3P CABLE HOLDER 51063-0305 Not used C602 CEAT102M6R3
C604 CEJA2R2M50
(2) PARTS LIST FOR AWX7123 C603,C611 CKSQYF103Z50
SEMICONDUCTORS C607,C608 CKSQYF104Z25
C605,C606,C610 CKSQYF473Z50
IC751 UPC4570G2
Q707,Q708 2SC1845
Q705 2SC2712 RESISTORS
Q701-Q704 DTC124EK VR601 (500kΩ) ACS7029
D704 1SS355 Other Resistors RS1/10S J

D701,D703,D705 SLP9118C51H OTHERS

X601 CERAMIC RESONATOR VSS1014
SWITCHES (4.19MHz)
S702-S704 VSG1009 13P CABLE HOLDER 51063-1305
CN601 19P FFC CONNECTOR 9607S-19F
CAPACITORS J602 JUMPER WIRE D15A13-125-2651
C753,C754,C761,C762 CCSQCH101J50
C767,C768 CCSQCH221J50
C751,C752,C755,C756
C763,C764
CEAL100M50
CEALR10M50
G OPT ASSY
C759,C760 CEALR47M50 OTHERS
3P CABLE HOLDER 51063-0305
C757,C758 CFTYA153J50 REMOTE RECEIVER UNIT GP1U27X
C701 CKSQYF104Z25

RESISTORS
R751,R752 RS1/10S101J
VR751,VR752 (30kΩ) ACS7028
Other Resistors RS1/10S J

26
Downloaded from www.Manualslib.com manuals search engine
 A-209R, A-209

6. ADJUSTMENT
6.1 IDLE CURRENT ADJUSTMENT
¶ CAUTION : Heatsinks’ (Q323–Q326) DC level is equal to +B or -B.
Don’t touch them or you will be electric shocked.

1. Connect the measuring instrument as shown in Fig.6-1. (R373 or R374)

2. Turn the POWER switch to ON.
3. Adjust VR301 (VR302) so that the voltage between both sides of R373 (R374) becomes 10mV ± 1mV.
4. Ages for 5 minutes.
5. Adjust VR301 (VR302) so that the voltage between both sides of R373 (R374) becomes 11mV ± 1mV.

DC Voltmeter DC Voltmeter

AF ASSY
SIDE A

Heat Sink
R373 R374

R375 R376

Heat Sink
VR301 VR302
Heat Sink

Heat Sink
CN202

Fig.6-1 Adjustment Method

27
Downloaded from www.Manualslib.com manuals search engine
 A-209R, A-209

7. GENERAL INFORMATION
7.1 DISASSEMBLY

1 3
1 ×2 1 1 ×2
1
10

1
2

Front Panel
5

13
5 Diagnose the
AF Assy.
∗ : Be careful not to injure
3 4 ×2 the Front Panel.
5 ×5
11

2
Rear Panel

Chassis
6 6 6

8 Unhook lead wires.

Rear Panel

7
For
Service

7 Chassis
×3 12 Screw for Rear Panel

PCB Support 7 ×2
9
×3
Cutting Pliers

28
Downloaded from www.Manualslib.com manuals search engine
 A-209R, A-209

7.2 IC
7 PD5443A (FRONT R ASSY : IC601) • The information shown in the list is basic information and
¶ REMOTE CONTROL AMP MICROCOMPUTER may not correspond exactly to that shown in the schematic
¶ Pin Assignment (Top view) diagrams.

P53 1 SR T2 42 P52
P17/SRDY 2 STB NC 41 P07
P16/CLK 3 CLK LOUD 40 P06
P15/SOUT 4 DATA M-CTRL 39 P05
P14/SIN 5 CD-IND P-DET 38 P04
P13/T1 6 TU-IND P-CTRL 37 P03
P12/T0 7 PH-IND DIRECT 36 P02
P11 8 LI-IND NC 35 P01
P10 9 T1-IND WAKE UP 34 P00
P27/IN7 10 SPA-IND FUNC2 33 P43
P26/IN6 11 SPB-IND FUNC1 32 P42
P25/IN5 12 LOU-IND V-UP 31 P41
P24/IN4 13 NC V-DOWN 30 P40
P23/IN3 14 NC RSEL2 29 P33/CNTR1
P22/IN2 15 DIR-IND RSEL1 28 P32/CNTR0
P21/IN1 16 T2-IND NC 27 P31/INT1
P20/IN0 17 F-MUTE BACK UP 26 P30/INT0
VREF 18 VREF RST 25 RESET
XIN 19 XIN SPA 24 P51/XCOUT
XOUT 20 XOUT SPB 23 P50/XCIN
VSS 21 VSS VCC 22 VCC

¶ Pin Function
No. Pin name I/O Function No. Pin name I/O Function
1 P53 I Remote control signal input pin. 24 P51/XCOUT I SPEAKER-A KEY input.
2 P17/SRDY O STB for TC9163N. 25 RESET I Reset pin.
3 P16/CLK O CLOCK for TC9163N. 26 P30/INT0 I BACK UP detection pin. interrupt specification.
4 P15/SOUT O DATA for TC9163N. 27 P31/INT1 I Not used.
5 P14/SIN O CD INDICATOR. 28 P32/CNTR0 I REC selector input 1.
6 P13/T1 O TUNER INDICATOR. 29 P33/CNTR1 I REC selector input 2. interrupt specification.
7 P12/T0 O PHONO INDICATOR. 30 P40 O Volume DOWN data output.
8 P11 O LINE INDICATOR. 31 P41 O Volume UP data output.
9 P10 O TAPE1 INDICATOR. 32 P42 I FUNCTION selector input 1.
10 P27/IN7 O SPEAKER-A INDICATOR. 33 P43 I FUNCTION selector input 2.
11 P26/IN6 O SPEAKER-B INDICATOR. WAKE UP input.
34 P00 I
12 P25/IN5 O LOUDNESS INDICATOR. Key on wake up specification.
13 P24/IN4 O Not used. 35 P01 O Not used.
14 P23/IN3 O Not used. DIRECT KEY input.
36 P02 I
15 P22/IN2 O DIRECT INDICATOR. Key on wake up specification.
16 P21/IN1 O TAPE2 INDICATOR. 37 P03 O Protection control pin.
17 P20/IN0 O FUNCTION switch MUTE. 38 P04 I Output error detection pin
18 VREF I Pulls up to 5V. 39 P05 O MUTING control pin.
19 XIN I 4.19MHz . LOUDNESS KEY input.
40 P06 I
20 XOUT O Ceramic vibrating and connecting terminal. Key on wake up specification.
21 VSS - Digatal GND. 41 P07 O Not used.
22 VCC - Power supply +5V. 42 P52 I TAPE2 KEY input.
23 P50/XCIN I SPEAKER-B KEY input.

29
Downloaded from www.Manualslib.com manuals search engine
 A-209R, A-209

8. PANEL FACILITIES AND SPECIFICATIONS

8.1 PANEL FACILITIES
[ FRONT PANEL ]

1 2 3 4 5

STEREO AMPLIFIER z¿<?/B Direct Energy MOS VOLUME

POWER Î
CD TUNER PHONO LINE TAPE 1 TAPE 2
/CD-R/MD MONITOR

— OFF _ ON

A SPEAKERS B BASS TREBLE BALANCE INPUT SELECTOR

PHONES LOUDNESS DIRECT TAPE 2

MONITOR

– + – + MIN MAX L R

~ = - 0 9 8 7 6
The illustration shows the A-209R.

1 POWER (— OFF/_ ON) switch 5 TAPE 2 MONITOR button/indicator

Press to turn power to the unit ON and OFF. Use when there is an adaptor component (graphic equalizer,
This unit cannot be turned ON and OFF using the remote etc.) or cassette deck connected to the TAPE2 MONITOR
control unit. terminals.
On : Indicator lights when using the adaptor component or
2 REMOTE CONTROL SENSOR window listening to the cassette deck.
(on the A-209R only) Off : Indicator goes off when not in use.

3 VOLUME control NOTES:

Use to adjust the volume level. ÷ When no connections are made to the TAPE2 MONITOR
terminals, or when they are not in use, be sure to set this
switch to the off position. (No sound will be heard if it is set
4 INPUT SELECTOR knob/indicators to the on position.)
Turn the knob clockwise or counterclockwise so that the
÷ When the TAPE2 MONITOR indicator is on and the INPUT
indicator lights for your desired input source. Turning the knob
SELECTOR knob is not set to TAPE1/CD-R/MD, the sig-
clockwise causes the lit indicator to right. Turning counter-
nals which are input through TAPE 2 MONITOR are then
clockwise causes it to left.
output at TAPE1/CD-R/MD REC OUT.
CD : For compact disc playback with a CD player.
TUNER : For AM or FM broadcast reception with a tuner.
PHONO : For record playback with a turntable.
6 BALANCE control
LINE : Set to this position when listening to the pro- Should normally be left in the center position. Adjust balance
gram from a component connected to the LINE if the sound is louder from one of the speakers. If the right side
terminals. is louder, turn toward the L (left) position and if the left side is
TAPE 1/CD-R/MD:For playback with a cassette deck,CD recorder louder, turn toward the R (right) position.
or MD recorder connected to TAPE1/CD-R/
MD terminals. NOTE:
This control does not operate when the DIRECT button is in the
on position.

30
Downloaded from www.Manualslib.com manuals search engine
 A-209R, A-209

7 DIRECT button/indicator 0 BASS tone control

Use this button when you do not wish to pass the output from Use to adjust the low-frequency tone. The center position is the
input terminal equipment through the various frequency ad- flat (normal) position. When turned to the right, low-frequency
justing circuits (BASS, TREBLE, BALANCE, LOUDNESS). tones are emphasized; when turned to the left, low-frequency
On : The indicator lights: The signals passing through the tones are de-emphasized.
input terminals are reproduced without passing through
the various frequency adjusting circuits. This results in NOTE:
flat, pure sound which is a more faithful reproduction of This control does not operate when the DIRECT button is in the
the input source. on position.
Off : The indicator goes off: The signal passes through the
various frequency adjusting circuits. - SPEAKERS B (ON/OFF) button/indicator
Use this button to listen to the speaker system connected to
8 LOUDNESS button/indicator SPEAKERS B terminals.
Use when listening at low volume levels. ON : The indicator lights. Sound is heard from the speaker
On : The indicator lights: Boosts low and high frequencies to system.
give added punch to playback even at a low volume OFF : The indicator goes off. No sound is heard from the
level. speaker system. Set to this position when listening with
Off : The indicator goes off: Should normally be left in this headphones.
position.
= PHONES jack
NOTE: When using headphones, insert the plug into this jack.
This button does not operate when the DIRECT button is in the
on position. NOTE:
The speakers continue to output sound even when head-
9 TREBLE tone control phones are plugged into this jack.
Use to adjust the high-frequency tone. The center position is To mute the sound from the speakers, press the SPEAKERS
the flat (normal) position. When turned to the right, high- button to OFF.
frequency tones are emphasized; when turned to the left, high-
frequency tones are de-emphasized. ~ SPEAKERS A (ON/OFF) button/indicator
Use this button to listen to the speaker system connected to
NOTE: SPEAKERS A terminals.
This control does not operate when the DIRECT button is in the ON : The indicator lights. Sound is heard from the speaker
on position. system.
OFF : The indicator goes off. No sound is heard from the
speaker system. Set to this position when listening with
headphones.

31
Downloaded from www.Manualslib.com manuals search engine
 A-209R, A-209

[ REAR PANEL ]

1 23456789 0 -

SPEAKERS

R
B L

SIGNAL PHONO TUNER CD LINE TAPE 1 TAPE 2 MONITOR

GND /CD-R/MD

REC PLAY REC PLAY ª · · ª AC INLET

L L CONTROL

OUT

R R
IN IN IN IN OUT IN OUT IN R A L

= ~ ! @
The illustration shows the A-209R.

1 GND (Turntable ground) terminal 0 SPEAKERS B terminals (Right channel)

2 PHONO terminals - SPEAKERS B terminals (Left channel)

3 TUNER terminals = SPEAKERS A terminals (Right channel)

4 CD terminals ~ SPEAKERS A terminals (Left channel)

5 LINE terminals ! CONTROL OUT jack

This jack is for output of control signals when operating other
6 TAPE 1/CD-R/MD REC (OUT) terminals components bearing the Î mark with the attached remote
control unit. (on the A-209R only)
7 TAPE 1/CD-R/MD PLAY (IN) terminals
@ AC INLET jack
Connect power cord to here and an AC wall socket, or the AC
8 TAPE 2 MONITOR REC (OUT) terminals outlet of an audio timer.
If you are going to be away from home for a long period of time,
9 TAPE 2 MONITOR PLAY (IN) terminals disconnect the unit from the wall socket.

NOTES:
÷ If you use an other power cord than provided, we cannot
assume the liabilities in what may occur as a result of it.
÷ (The provided power cord has a current capacity of 2.5 A.)

32
Downloaded from www.Manualslib.com manuals search engine
 A-209R, A-209

[ REMOTE CONTROL ] (A-209R)

1 7
2 STANDBY/ON

8
CD TUNER TAPE

3 TAPE
SELECT 2 7 3

Ι ΙΙ 1
TAPE
¡ 9
4
DECK DECK

DISC
¢ 7 CD 3
0
-
– +
5
SELECT STATION

TUNER

CD TUNER PHONO +

6 TAPE 1 TAPE 2 LINE

VOLUME
=
–

STEREO AMPLIFIER
REMOTE CONTROL UNIT Î

1 CD POWER button 7 TUNER POWER button

Switches CD player power ON/OFF. Switches TUNER power ON/OFF.

2 TAPE SELECT button 8 TAPE POWER button

Selects the cassette No. (1 to 6) for multi-cassette changer. Switches the cassette deck power ON/OFF.
(Can not turn ON/OFF some cassette decks.)
3 DECK II button
To operate Deck II, press this button before pressing the 9 TAPE operation buttons
operating buttons. Also, when using a single deck, press this 2, 3 : Playback in the direction of the arrows.
button before pressing the operating buttons. 7 : Stop
1, ¡ : Tape fast forward/reverse.
4 DECK I button
To operate Deck I, press this button before pressing the 0 CD player operation buttons
operating buttons. 4 : Returns you to the start of the current track.
(Track search)
5 DISC SELECT button ¢ : Takes you to the start of the next track.
Press this to select discs on a multi or twin tray compact disc (Track search)
player. 7 : Stop
3 : Play
6 Input selector button
Use to select the playback source. - STATION + (up), – (down) buttons
CD : For compact disc playback with a CD player. Calls each station number in sequence.
TUNER : For AM or FM broadcast reception with a tuner.
PHONO : For record playback with a turntable. = VOLUME + (up), – (down) buttons
TAPE 1 : For playback with a cassette deck,CD recorder or + ........................................................ Increases the volume.
MD recorder connected to TAPE1/CD-R/MD ter- – ...................................................... Decreases the volume.
minals.
TAPE 2 : For playback with a cassette deck or adaptor NOTE:
connected to TAPE 2 MONITOR terminals. When the accessory remote control unit is used to operate
LINE : For playback with a component connected to the other Pioneer components with the Î mark, it cannot be used
LINE terminal. to operate functions which do not correspond to the functions
listed on the remote control unit.

33
Downloaded from www.Manualslib.com manuals search engine
 A-209R, A-209

8.2 SPECIFICATIONS Power Supply/Miscellaneous

Power requirements ................... AC 220 – 230 V, 50/60 Hz
Amplifier Section Power consumption
Continuous power output [A-209R] ................................................................ 130 W
(both channels driven at 20 Hz to 20 kHz)** Dimensions (including knobs and other protruding parts)
[A-209R] ...................................... 420 (W) x 114 (H) x 307 (D) mm
T.H.D. 0.1 %, 8 Ω ..................................... 35 W + 35 W* Weight (without package)
T.H.D. 0.15 %, 4 Ω ................................... 45 W + 45 W* [A-209R] ................................................................. 4.7 kg
DIN Continuous power output
(both channels driven at 1 kHz) Accessories
[A-209R] Remote control unit ............................................................ 1
T.H.D. 1.0 %, 8 Ω ...................................... 45 W + 45 W Batteries (AA/R6P) ............................................................. 2
T.H.D. 1.0 %, 4 Ω ...................................... 60 W + 60 W Power cord (Rated current 2.5 A) ...................................... 1
Total harmonic distortion** Operating instructions ........................................................ 1
[A-209R] Warranty card .................................................................... 1
20 Hz to 20 kHz, 17.5 W, 8 Ω ............................. 0.08 %*
÷ Power output specification is for when power supply is NOTE:
230 V.
Specifications and design are subject to possible modifica-
tions without notice, due to improvements.
Input sensitivity/impedance
PHONO (MM) ........................................... 2.8 mV/50 kΩ
* Measured with DIRECT button set to on.
[A-209R]
** Measured by Audio Spectrum Analyzer.
CD, TUNER, LINE, TAPE1/CD-R/MD, TAPE2 MONITOR
.................................................................. 200 mV/50 kΩ
PHONO (MM) overload level
1 kHz, T.H.D. 0.1 % ............................................ 150 mV
Output level/impedance
TAPE1 REC, TAPE2 MONITOR REC ....... 200 mV/1 kΩ
Frequency response
PHONO (MM) ......................... 20 Hz to 20 kHz, ±0.5 dB
[A-209R]
CD, TUNER, LINE, TAPE1/CD-R/MD, TAPE2 MONITOR
.................................................... 5 Hz to 100 kHz, +0 –3
dB*
Tone control
BASS ..................................................... ±8 dB (100 Hz)
TREBLE ................................................... ±8 dB (10 kHz)
Loudness contour (volume control set at –30 dB position)
....................................... +6 dB (100 Hz)/+4 dB (10 kHz)
Signal-to-Noise ratio (IHF short circuit, A network)
PHONO (MM, 5 mV input) ................................... 85 dB*
[A-209R]
CD, TUNER, LINE, TAPE1/CD-R/MD, TAPE2 MONITOR
............................................................................ 106 dB*
Signal-to-Noise ratio (DIN, continuous power/50 mW)
PHONO (MM) ............................................. 71 dB/67 dB*
[A-209R]
CD, TUNER, LINE, TAPE1/CD-R/MD, TAPE2 MONITOR
................................................................... 91 dB/71 dB*

Accessories

Power cord
(MYXJ, MLXJ : ADG1154)
Î
TUNER

VOLUME
TAPE

+
3

–
TAPE

CD

PHONO
TUNER

+
1

LINE

(SBDXJ : ADG1154,
7

STATION

REMOTE CONTROL UNIT

ΙΙ

TAPE 2
TUNER

STEREO AMPLIFIER
¢
DECK
CD

–
STANDBY/ON

VKX1007)
SELECT

SELECT
Ι

TAPE 1
TAPE

DISC
DECK

CD

(MVXJ : ADG1156)
AA size IEC R6P Remote control unit (A-209R)
batteries (x2) CU-A019 (AXD7193)

34
Downloaded from www.Manualslib.com manuals search engine