We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 4
ST
mmace a.
Calculation of Elongation (15.2mm HT Strand) for 80 T locking load
Theoretical elongation Of HT Strands, E = Px L
AKE
Where
E = Elongation
P = Force / Load
Free Length of Strand
A= Cross Section Area of Strand
M = Modulus of Elasticity of Strands
Here
P = .8X 1000KN = 800000N.
= 11000 mm (Free Length) = 11000 mm
A= 140 mm2= 140 mmz
M = 195000 N/mmz= 195000 N/ mma
Properties of HT Strand (IS: 14268 ~ 1995)
‘Class of | Nominal | Toerance | Nominal | Nominal | Breaking | 02% | Minimom | Modulus
ar |[pisam| india | area | Mess | Strength | Proot | Temte | of
strana mm cern |) | Load | strength | Elasticey
(KN) (mm?) | (Nimm*)
T [95 [sa] sé | ows [a0 | won| tee0 | 195000
rr
ay [sa [me | om | aor amet
2 | sa | wea | ius [202 | aie?
| 9s saee7 | Sa] aaa} a023 | 921} 1800 | 105000
ois
mi | =e) | ma | ose are | na
os
a
| “oss
12) aes? | a0) tae | a7 | mae
ois Note : Value of A & M is Considered as per IS 14268 - 1995
Therefore,
Elongation (E) = 800000 X 11000 /140 X 7 X 195000
= 8800000000/191100000
= 63.31
Therefore, The Elongation Of HT Strand = 46.04 mm
So as per the IS: 10270 - 1982, 16 % variation is allowed compared to theoretical
elongation in range of 39 mm to 53 mm
Pressure calculation for 80 T
Pressure = Load / Area
Load 80T
Area of ram 318.5 cm2
P = 80 T X1000(kg) / 318.5 (cm2)
Pressure = 251.17 kg/cm2 = 255 kg/cm2 Calculation of Elongation (15.2mm HT Strand) for 80 T locking load
Theoretical elongation Of HT Strands, E = Px L
AXE
Where
E = Elongation
P= Force / Load
L= Free Length of Strand
A= Cross Section Area of Strand
M = Modulus of Elasticity of Strands
Here
P = .8X 1000KN = 800000N.
L= 11000 mm (Free Length) = 11000 mm
A= 140 mma= 140 mm2
M = 195000 N/mm2= 195000 N/ mmz
Properties of HT Strand (IS: 14268 — 1995)
Class of | Nominal | Tolerance | Nominal | Nominal | Breaking | 02% | Minimum | Modulus
Hr |Diamm| impin | Arex | Mass | Strength | Proof | Tensile | of
Strand am | cm) | Kan | KH | Load | Strength | Elasticity
a | evmm!) | vim’)
T 95 204 ste | 040s | 990 | sot 860 | 195000
ry =a 7 | oss | azo1 | oar
By 208 x9 | om | tor | tsa
152 04 | 1394 | Lose [202 | 2162
7 os | 7066 sas | 0432 [tors | 921 1860 | 195000
01s
|
ni | 0667 [742 | osez | asz9 [ar
| 01s
|
By | +066 97 | ome | iss? | 1653
015
|
152 | 066 vo | 1102 | 2607 | 2386
1s |
I J Note : Value of A & M Is Considered as per IS 14268 - 1995
Therefore,
Elongation (E) = 800000 X 11000 /140 X 7 x 195000
= 8800000000/191100000
= 63.31
Therefore, The Elongation Of HT Strand = 46.04 mm
So as per the IS: 10270 - 1982, 16 % variation is allowed compared to theoretical
elongation in range of 39 mm to 53 mm
Pressure calculation for 80 T
Pressure = Load / Area
Load 80T
Area of ram 318.5 cm2
P = 80 T X1000(kg) / 318.5 (cm2)
Pressure = 251.17 kg/cm2 = 255 kg/cm2
