Simhadri Super Thermal Power

Ref:40073513 Date:22.05.2017

BID SUBMISSION DATE:07.06.2017 : 1500 Hrs.

BID OPENING DATE:07.06.2017 : 1530 Hrs.

Attn.:
Dear Sir/Madam,

1.0 Please submit your most competitive offer online only for the subject package as per scope of work and terms & conditions given in bidding documents.
Bidding Documents for the subject package are attached in C folder.

2.0 These documents are meant for the exclusive purpose of bidding against this package and shall not be transferred, reproduced or otherwise used for purposes
other than that for which these are specifically issued.

3.0 The bidder may note that during the period the bids are under consideration, the bidder and/or their representative or other interested parties are advised to
refrain from contacting, by any means, the Employer and/or his employees/representatives, on matters related to the bids under consideration and that if necessary to
assist in the examination, evaluation and comparison of bids, the Employer may at its discretion obtain from bidder, clarification on its bid by requesting for such
clarifications and response in writing.

4.0 It may please be noted that issuance of bidding documents to a prospective bidder does not construe that such bidder is considered qualified.

5.0 Bids may be submitted before closing date & time mentioned above.

Thanking you,
Yours faithfully,
For and on behalf of NTPC Ltd.

P.O. SIMHADRI VISAKHAPATNAM 01 531020

Ref:40073513 Date:22.05.2017

(R V PRABHAKARA RAO)

Encl.: as above
Ref:40073513 Date:22.05.2017

Item No Item Text Qty Unit Conditions

1 Civil works for 4th raising of Lagoon-I 0.000
1 STRIPPING/EXCAVATION for foundation
Stripping/Excavation and grading for foundation of dyke in all types of
soils and ash including clearing and grubbing for removal of vegetation
with all labour, materials and equipment, lifting, hauling and stock
piling of useful excavated material 50M away from the Excavation of
foundation and disposal of unsuitable material to the area identified by
the Engineer, cost of lowering water level to at least 1 m below final
excavation level by any approved method as required including
construction of cofferdams wherever required, removal of slush and
organic materials, if any, for all leads and lifts complete as per
specifications, drawings and as directed by the Engineer.
2 FOUNDATION PREPARATION
Preparation of foundation including compaction of foundation to achieve
dry density not less than 95 percent of Maximum Dry Density (Standard
Proctor) with vibratory rollers including cost of labour equipment and
material etc. Complete as per specifications drawings and as directed by
Engineer.
3 EXCAVATION for slope drains..
Earthwork in excavation for slope drains, panel walls, dowel banks,
pipe trenches etc in all type of soils/ash, whenever required, including
all incidental charges, cost of labour, materials, equipment for
excavation, lifting, hauling and stockpiling of useful excavated
material, lowering of ground water level by any approved method
including construction of cofferdams wherever required, and draining the
water as specified, removal of slush, if any, including all leads and
lifts, complete as per specifications, drawings, and instructions of the
Engineer.
In Soil/ash
4 FILLING/BACKFILLING
Backfilling around the foundations, pits, pipe trenches etc with useful
portion of excavated earth/ash including cost of labour, collection,
placing in layers, watering, compaction including all leads and lifts
complete as per specification and as directed by the Engineer.
5 DYKE EMBANKMENT
Formation of dyke using approved materials including the preparation
of borrow area, stripping, watering of borrow area, excavation of
approved quality of material from borrow area, using poclains or any
Ref:40073513 Date:22.05.2017

Item No Item Text Qty Unit Conditions

other mechanical means, loading, unloading, transporting by dumpers,
trucks etc., surface watering/ dewatering, lowering of water level to at
least 1.0 m below the bottom of the working level including construction
of cofferdams wherever required, depositing the fill material on the
dyke, spreading by dozers in layers not exceeding 30 cm in compacted
thickness for forming the embankment with all leads, lifts, breaking
clods, watering, compaction with approved rollers to achieve a dry
density not less than 95% of maximum dry density (Standard Proctor)
forming extra width on edges, trimming of slopes and slope compaction
with dozers or slope compactors to obtain the section as per
construction drawings, with all incidental charges, cost of labour,
equipment, materials, royalties etc. complete as per specifications,
drawings and as directed by the Engineer.
a) With earth supplied by the Contractor
b) With ash borrowed from existing ash lagoons with an average lead of
500m.
c) With available ash from the stock piles with an average lead of 50M.
6 DISMANTLING OF EXISTING ROCK TOE
Dismantling the Rock toe and transporting the stone boulders away from
the dyke raising area as directed by the Engineer and stacking the same
for measurement for re-using in the Rock toe work after dyke raising is
completed etc
7 DIMANTLING OF EXISTING AGGREGATE FILTER
Dismantling the filter work and transporting the aggregate away from
the dyke raising area as directed by the Engineer and stacking the same
etc
8 SAND FILTER works
Providing and laying graded coarse sand satisfying filter criteria for
laying filters, blanket, chimney etc.. including, all leads and lifts,
incidentals, loading, weighing, transporting, handling, re-handling if
required lowering water table, construction of coffer dams, where ever
required, laying of sand in position, in layers not exceeding 300 mm in
compacted thickness, watering, rolling and tested for relative density
not less than 80%, including excavation for chimney, with all labour,
equipment, leads and lifts all testing charges all incidentals etc..
Complete as per specifications, drawings and as directed by engineer-in
-charge. Rate includes all the above operations and any other item not
specifically mentioned but required for completion of work.
Ref:40073513 Date:22.05.2017

Item No Item Text Qty Unit Conditions

9 AGGREGATE FILTER
Providing and forming graded aggregate filters of size ranging from 10
mm to 75 mm, satisfying the filter criteria with sand filter, including
lowering of water table including construction of cofferdams wherever
required, conveyance of materials from quarries, placing filter in
position, compaction, cost of labour, equipment, all leads and lifts
etc. complete as per specifications, drawings and as directed by
Engineer.
With stone aggregate arranged by agency
10 ROCKFILL /STONE PITCHING WITH AVAILABLE MATERIAL
Forming dry stone pitching/ rock fill wherever required with available
broken rock of specified quality stacked at the dyke area, hand packing
it in position over coarse graded aggregate, clearing and disposal of
brush, roots and other perishable materials from rock fill, including
conveyance of materials from stacks placed at the dyke area, with all
leads, lifts, labour, material, equipment, cofferdams, dewatering etc.
complete as per specification, drawings and as directed by the Engineer.
11 ROCKFILL /STONE PITCHING
Providing and forming dry stone pitching/ rock fill wherever required
with broken rock of specified quality and slope and ranging in weight as
specified including cost and conveyance of materials from quarries, hand
packing it in position over coarse graded aggregate, clearing and
disposal of brush, roots and other perishable materials from rock fill,
with all leads, lifts, labour, material, equipment, royalties,
cofferdams, dewatering etc. complete as per specification, drawings and
as directed by the Engineer.
With stones arranged by agency
12 BRICK WORK
Providing, laying in position brick masonry for brick masonry panel
walls on the slopes of ash dyke, slope drains, dowel bank etc., in
cement: sand mortar (1:6) including all lifts, cost of labour,
materials, equipment, mixing, laying, raking joints, curing including
transportation and preparation of surface etc. complete as per
specifications, drawings and as directed by Engineer.
With ash bricks (class 75)
13 SLOPE PROTECTION WORKS WITH BRICKS
Providing and packing bricks laid flat, for protection of dyke slopes
with brick packing within the panel walls and pointing surface joint
Ref:40073513 Date:22.05.2017

Item No Item Text Qty Unit Conditions

with cement mortar (1:6) (1 cement: 6 coarse sand) (cost of panel walls
shall be paid under relevant items) including the cost of labour,
materials, transportation all leads and lifts, equipment, etc. including
trimming the surface to accommodate the brick in flat etc. complete as
per drawings and as directed by the Engineer.
With ash bricks (class 75)
14 SLOPE PROTECTION WORKS WITH TURF SODS
Slope protection with turf sods including collection, conveyance and
providing 50 mm thick grass turf sods, ramming and watering for three
months or till the grass establishes itself uniformly whichever is
later, with all leads, lifts, watering charges, etc. complete as per
specifications, drawings and as directed by the Engineer.
15 DISMANTLING OF EXISTING WBM ROAD WORK
Dismantling the WBM road and transporting the aggregate away from the
dyke raising area as directed by the Engineer and stacking the same for
measurements for re-use in the road work after dyke raising is completed
etc
16 ROAD WORKS
a) Laying of water bound macadam base course with available aggregate
stacked at dyke area each true to camber and slope including all lifts
and leads, preparation of sub-grade, spreading, rolling, watering and
grouting including all labour, tools, equipments, and incidentals
necessary to complete the work as per drawing, specifications and the
direction of engineer.
b) Providing and laying of base course (water bound macadam) of 75mm
finished thickness each with 63-45mm and 53-22.40mm graded stone
aggregate, true to camber and slope including full compensation for
furnishing all materials to be incorporated in the work including all
leads and lifts, preparation of sub-base course, spreading, rolling,
providing and applying screening, sprinkling and grouting, application
of binding material, setting, and drying, all labour, tools, equipments
royalties, and incidentals necessary to complete the work as per
drawings, specifications and directions of the Engineer.
d)Providing and Laying of Moorum in specified thickness true to camber
and slope including all lifts and leads, preparation of sub-grade,
spreading, rolling, watering and including all labour, tools,
equipments, royalties and incidentals necessary to complete the work as
per drawing, specifications and the direction of engineer.
Ref:40073513 Date:22.05.2017

Item No Item Text Qty Unit Conditions

17 PCC
Providing and laying nominal mix, Plain Cement Concrete 1:4:8 (with 40
mm nominal size graded aggregate) using graded aggregate at all levels
for all kinds of work including labour, materials, equipment, handling,
transporting, batching, curing, testing, all leads and lifts etc., all
complete as per specifications, drawings and instructions of the
Engineer but excluding shuttering work.
18 RCC 1:1:2
Providing and laying nominal mix, cement concrete for reinforced
concrete work at all levels for all kinds of work, including labour,
materials, equipment, handling, transporting, batching, mixing, placing,
levelling, compacting, curing, dewatering, testing and rendering or
cleaning etc., for all leads and lifts complete as per specification,
drawings and instructions of the Engineer, but excluding staging,
shuttering and reinforcement work.
a) RCC 1:1:2 (with 20 mm nominal size graded stone aggregates)
19 RCC 1:2:4
Providing and laying Reinforced cement concrete 1:2:4 in walls at all
levels for all kinds of work, including labour, materials, equipment,
handling, transporting, batching, mixing, placing, levelling,
compacting, curing, dewatering, testing and rendering or cleaning etc.,
for all leads and lifts complete as per specification, drawings and
instructions of the Engineer, but excluding staging, shuttering and
reinforcement work.
a) 1:2:4 (with 20 mm nominal size graded stone aggregates)
20 REINFORCEMENT
Providing and placing reinforcement, in reinforced concrete work, at all
levels, for all kinds of work, including transportation, cleaning,
straightening, cutting, bending, binding in position with annealed wire
and/or welding, providing concrete cover blocks, pins, separators,
chairs, supports for reinforcement etc. with all materials, labour,
equipment, handling, transporting, testing etc. preparation of bar
bending schedules, all complete as per specifications, drawings and
instructions of the Engineer.
a) High strength deformed bars
21 FORMWORK
Providing and fixing formwork of approved quality for cast-in-situ,
plain or reinforced concrete works of any type and section (including
Ref:40073513 Date:22.05.2017

Item No Item Text Qty Unit Conditions

curved surfaces), including labour, materials, equipment, wastage for
forms, shoring, strutting, scaffolding, staging, tieing, nailing,
caulking, bolting, etc. and removal of formwork and staging, etc., all
complete as per specifications, drawings and instructions of the
Engineer.
22 PLASTERING
12mm thick cement plaster with 1:6 cement mortar (1 cement: 6 coarse
sand)
23 INSTRUMENTATION
a. Providing and installing in position porous tube piezometers at
specified locations including drilling cased bore holes of 100 mm
diameter, cleaning them assembling porous tube and PVC pipe of about
12.0 metre length with couplings, cleaning and driving out air from the
pores of porous tube, pouring clean saturated coarse sand around the
porous tube, backfilling with cement sand grout (1cement : 4sand) around
the PVC pipe, providing removable cover for the PVC pipe and casing, and
fabricating and installing of brass bottom plug, brass adapter, cost of
the portion of steel casing pipe to be left in the bore hole, including
the cost of all labour, equipment, materials, transportation to site
etc. all leads & lifts complete as per specification, drawings and
as directed by the Engineer.
b. Providing and installing in position the surface settlement points of
1.0 metre depth at specified locations, including drilling holes and
backfilling with with 1:2:4 cement concrete and cost of all labour,
equipment, materials, transportation to site all leads & lifts
etc. complete as per specifications and drawing
24 STRUCTURAL STEEL WORK
Providing, fabricating, transporting, erecting and installing, at all
elevations miscellaneous Mild Steel parts including any rolled sections,
lugs, insert plates, hand railings etc to be embedded in concrete for
all kind of works including the cost of all labour, material and
equipment, setting material in concrete, layout, scaffolding, handling
at site, cutting, forming, grinding, drilling, bolting, welding,
testing, application of primer coat on exposed surfaces, etc., all
complete as per drawings and specifications and instructions of the
Engineer.
i) Structural steel sections/plates/pipes
25 DISMANTLING WORKS
Ref:40073513 Date:22.05.2017

Item No Item Text Qty Unit Conditions

Dismantling of the following works and stacking the serviceable
materials.
a concrete 1:3:6 or richer
b Brick work
c Turf sods
26 Providing and Laying NP2 RCC pipes 300mm Dia..
Providing and laying NP2 class RCC pipes of 300 diameter with collars
including positioning the pipes, jointing with cement mortar 1:2 (1,
cement : 2 fine sand) including back filling with available earth,
watering, rolling etc.. Complete
27 Providing water tanker in running condition with 6 trips per day
(average), having minimum capacity of 6KL along with water filling
arrangement and engaging 5 manpower for sprinkling water including
discharge pipe & its handling upto minimum 200M length, including
cost of all type of maintenance, spares, lubricant, operator/driver,
road taxes etc. required for the same and any other cost for running of
vehicle and 5 hp pump etc. including the fuel(diesel),oil etc. complete.
28. Providing and laying bottom ash satisfying filter criteria on slope
of dyke embankment for filter including preparation of borrow area,
stripping, watering of borrow area, excavation of approved quality of
material from borrow area, using poclains or any other mechanical
means, loading, unloading, transporting by dumpers, trucks etc.,
surface watering/ dewatering, lowering of water level to at least 0.5
m below the bottom of the working level, including construction of
cofferdams wherever required, depositing the fill material on the area
to be filled, spreading by dozers or grader in layers not exceeding 30
cm in compacted thickness with all leads and lifts etc., complete as per
specifications & drawings and as directed by the Engineer.
Scope work:
2.1 The scope of work under this contract for #CIVIL WORKS FOR FOURTH
RAISING OF ASH DYKE (LAGOON-I) UPTO 32.00MTR, SIMHADRI SUPER THERMAL
POWER STATION STAGE-I (2X500MW)# shall envisage the works as mentioned
in the schedule of quantities and special conditions of contract and as
per the instructions of Engineer-In-Charge.
2 Stripping/Excavation 171,000 M3 Basic Price,Service Ta
Stripping/Excavation and grading for foundation of dyke in all types of soils and ash including clearing and grubbing for removal of
vegetation with all labour, materials and equipment,lifting,hauling and stock piling of useful excavated material 50M away from the
Excavation of foundation and disposal of unsuitable material to the area identified by the Engineer, cost of lowering water level t
Ref:40073513 Date:22.05.2017

Item No Item Text Qty Unit Conditions

o at least 1 m below final excavation level by any approved method as required including construction of cofferdams wherever require
d, removal of slush and organic materials, if any, for all leads and lifts complete as per specifications, drawings and as directed
by the Engineer.
3 Preparation of foundation 83,500 M2 Basic Price,Service Ta
Preparation of foundation including compaction of foundation to achieve dry density not less than 95 percent of Maximum Dry Density
(Standard Proctor) with vibratory rollers including cost of labour equipment and material etc. Complete as per specifications drawi
ngs and as directed by Engineer.
4 Excavation for slope drains 4,500 M3 Basic Price,Service Ta
Earthwork in excavation for slope drains, panel walls, dowel banks, pipe trenches etc in all type of soils/ash, whenever required, i
ncluding all incidental charges, cost of labour, materials, equipment for excavation, lifting, hauling and stockpiling of useful exc
avated material, lowering of ground water level by any approved method including construction of cofferdams wherever required, and d
raining the water as specified, removal of slush, if any, including all leads and lifts, complete as per specifications, drawings, a
nd instructions of the Engineer.#In Soil/ash
5 Filling/Back filling 200 M3 Basic Price,Service Ta
Backfilling around the foundations, pits, pipe trenches etc with useful portion of excavated earth/ash including cost of labour, col
lection, placing in layers, watering, compaction including all leads and lifts complete as per specification and as directed by the
Engineer.
6 Formation of dyke with earth 150,000 M3 Basic Price,Service Ta
Formation of dyke using approved materials including the preparation of borrow area, stripping, watering of borrow area, excavation
of approved quality of material from borrow area, using poclains or any other mechanical means, loading, unloading, transporting by
dumpers, trucks etc., surface watering/ dewatering, lowering of water level to at least 1.0 m below the bottom of the working level
including construction of cofferdams wherever required, depositing the fill material on the dyke, spreading by dozers in layers not
exceeding 30 cm in compacted thickness for forming the embankment with all leads, lifts, breaking clods, watering, compaction with
approved rollers to achieve a dry density not less than 95% of maximum dry density (Standard Proctor) forming extra width on edges,
trimming of slopes and slope compaction with dozers or slope compactors to obtain the section as per construction drawings, with al
l incidental charges, cost of labour, equipment, materials, royalties etc. complete as per specifications, drawings and as directed
by the Engineer.#With earth supplied by the Contractor
7 Formation of dyke with ash avg 500m lead 800,000 M3 Basic Price,Service Ta
Formation of dyke using approved materials including the preparation of borrow area, stripping, watering of borrow area, excavation
of approved quality of material from borrow area, using poclains or any other mechanical means, loading, unloading, transporting by
dumpers, trucks etc., surface watering/ dewatering, lowering of water level to at least 1.0 m below the bottom of the working level
including construction of cofferdams wherever required, depositing the fill material on the dyke, spreading by dozers in layers not
exceeding 30 cm in compacted thickness for forming the embankment with all leads, lifts, breaking clods, watering, compaction with
approved rollers to achieve a dry density not less than 95% of maximum dry density (Standard Proctor) forming extra width on edges,
trimming of slopes and slope compaction with dozers or slope compactors to obtain the section as per construction drawings, with al
l incidental charges, cost of labour, equipment, materials, royalties etc. complete as per specifications, drawings and as directed
Ref:40073513 Date:22.05.2017

Item No Item Text Qty Unit Conditions

by the Engineer.#With ash borrowed from existing ash lagoons with an average lead of 500m.#
8 Formation of dyke with available ash 171,000 M3 Basic Price,Service Ta
Formation of dyke using approved materials including the preparation of borrow area, stripping, watering of borrow area, excavatio
n of approved quality of material from borrow area, using poclains or any other mechanical means, loading, unloading, transporting b
y dumpers, trucks etc., surface watering/ dewatering, lowering of water level to at least 1.0 m below the bottom of the working leve
l including construction of cofferdams wherever required, depositing the fill material on the dyke, spreading by dozers in layers no
t exceeding 30 cm in compacted thickness for forming the embankment with all leads, lifts, breaking clods, watering, compaction with
approved rollers to achieve a dry density not less than 95% of maximum dry density (Standard Proctor) forming extra width on edges,
trimming of slopes and slope compaction with dozers or slope compactors to obtain the section as per construction drawings, with al
l incidental charges, cost of labour, equipment, materials, royalties etc. complete as per specifications, drawings and as directed
by the Engineer.#With available ash from the stock piles with an average lead of 50M.#
9 Dismantling the Rock toe & transporting 1,350 M3 Basic Price,Service Ta
Dismantling the Rock toe and transporting the stone boulders away from the dyke raising area as directed by the Engineer and stackin
g the same for measurement for re-using in the Rock toe work after dyke raising is completed etc
10 Dismantling the agg filter &transporting 1,350 M3 Basic Price,Service Ta
Dismantling the filter work and transporting the aggregate away from the dyke raising area as directed by the Engineer and stacking
the same etc
11 Providing and laying coarse sand 60,000 M3 Basic Price,Service Ta
Providing and laying graded coarse sand satisfying filter criteria for laying filters, blanket, chimney etc.. including, all leads
and lifts, incidentals, loading, weighing, transporting ,handling, re-handling if required lowering water table, construction of
coffer dams, where ever required, laying of sand in position, in layers not exceeding 300 mm in compacted thickness, watering, roll
ing and tested for relative density not less than 80%, including excavation for chimney, with all labour, equipment, leads and lifts
all testing charges all incidentals etc.. complete as per specifications , drawings and as directed by engineer-in -charge. Rate
includes all the above operations and any other item not specifically mentioned but required for completion of work.
12 Providing and forming graded agg filters 1,900 M3 Basic Price,Service Ta
Providing and forming graded aggregate filters of size ranging from 10 mm to 75 mm, satisfying the filter criteria with sand filter,
including lowering of water table including construction of cofferdams wherever required, conveyance of materials from quarries, pl
acing filter in position, compaction, cost of labour, equipment, all leads and lifts etc. complete as per specifications, drawings a
nd as directed by Engineer.#With stone aggregate arranged by agency#
13 Forming drystone pitching with available 1,000 M3 Basic Price,Service Ta
Forming dry stone pitching/ rockfill wherever required with available broken rock of specified quality stacked at the dyke area, h
and packing it in position over coarse graded aggregate, clearing and disposal of brush, roots and other perishable materials from r
ock fill, including conveyance of materials from stacks placed at the dyke area, with all leads, lifts, labour, material, equipment
, cofferdams, dewatering etc. complete as per specification, drawings and as directed by the Engineer.#
14 Providing and forming dry stone pitching 1,700 M3 Basic Price,Service Ta
Ref:40073513 Date:22.05.2017

Item No Item Text Qty Unit Conditions

Providing and forming dry stone pitching/ rockfill wherever required with broken rock of specified quality and slope and ranging in
weight as specified including cost and conveyance of materials from quarries, hand packing it in position over coarse graded aggreg
ate, clearing and disposal of brush, roots and other perishable materials from rock fill, with all leads, lifts, labour, material, e
quipment, royalties, cofferdams, dewatering etc. complete as per specification, drawings and as directed by the Engineer.#With stone
s arranged by agency#
15 Providing & laying brick masonry 4,500 M3 Basic Price,Service Ta
Providing, laying in position brick masonry for brick masonry panel walls on the slopes of ash dyke, slope drains, dowel bank etc.,
in cement: sand mortar (1:6) including all lifts, cost of labour, materials, equipment, mixing, laying, raking joints, curing inclu
ding transportation and preparation of surface etc. complete as per specifications, drawings and as directed by Engineer.# With ash
bricks (class 75)#
16 Providing and packing bricks laid flat 63,000 M2 Basic Price,Service Ta
Providing and packing bricks laid flat, for protection of dyke slopes with brick packing within the panel walls and pointing surface
joint with cement mortar (1:6) (1 cement: 6 coarse sand)(cost of panel walls shall be paid under relevant items) including the cost
of labour, materials, transportation all leads and lifts, equipment, etc. including trimming the surface to accommodate the brick i
n flat etc. complete as per drawings and as directed by the Engineer.#With ash bricks (class 75)
17 Slope protection with turf sods 180,000 M2 Basic Price,Service Ta
Slope protection with turf sods including collection, conveyance and providing 50 mm thick grass turf sods, ramming and watering for
three months or till the grass establishes itself uniformly whichever is later, with all leads, lifts, watering charges, etc. compl
ete as per specifications, drawings and as directed by the Engineer.
18 Dismantling WBM road and transporting 4,000 M3 Basic Price,Service Ta
Dismantling the WBM road and transporting the aggregate away from the dyke raising area as directed by the Engineer and stacking the
same for measurements for re-use in the road work after dyke raising is completed etc
19 Laying WBM subbase & base with available 3,000 M3 Basic Price,Service Ta
Laying of water bound macadam base course with available aggregate stacked at dyke area each true to camber and slope including al
l lifts and leads, preparation of sub-grade, spreading, rolling, watering and grouting including all labour, tools, equipments, and
incidentals necessary to complete the work as per drawing, specifications and the direction of engineer.
20 Providing and laying of base course WBM 1,200 M3 Basic Price,Service Ta
Providing and laying of base course (water bound macadam) of 75mm finished thickness each with 63-45mm and 53-22.40mm graded stone a
ggregate, true to camber and slope including full compensation for furnishing all materials to be incorporated in the work including
all leads and lifts, preparation of sub-base course, spreading, rolling, providing and applying screening, sprinkling and grouting,
application of binding material, setting, and drying, all labour, tools, equipments royalties, and incidentals necessary to complet
e the work as per drawings, specifications and directions of the Engineer.
21 Providing and Laying of Moorrum 600 M3 Basic Price,Service Ta
Providing and Laying of Moorum in specified thickness true to camber and slope including all lifts and leads, preparation of sub-g
rade, spreading, rolling, watering and including all labour, tools, equipments, royalties and incidentals necessary to complete the
Ref:40073513 Date:22.05.2017

Item No Item Text Qty Unit Conditions

work as per drawing, specifications and the direction of engineer
22 Providing & laying CC 1:4:8 200 M3 Basic Price,Service Ta
Providing and laying nominal mix, Plain Cement Concrete 1:4:8 (with 40 mm nominal size graded aggregate) using graded aggregate at a
ll levels for all kinds of work including labour, materials, equipment, handling, transporting, batching, curing, testing, all leads
and lifts etc., all complete as per specifications, drawings and instructions of the Engineer but excluding shuttering work.
23 Providing and laying RCC 1:1:2 80 M3 Basic Price,Service Ta
Providing and laying nominal mix, cement concrete for reinforced concrete work at all levels for all kinds of work, including labour
, materials, equipment, handling, transporting, batching, mixing, placing, levelling, compacting, curing, dewatering, testing and re
ndering or cleaning etc., for all leads and lifts complete as per specification, drawings and instructions of the Engineer, but excl
uding staging, shuttering and reinforcement work.#a) RCC 1:1:2 (with 20 mm nominal size graded stone aggregates)#
24 Providing and laying RCC 1:2:4 in walls 7 M3 Basic Price,Service Ta
Providing and laying Reinforced cement concrete 1:2:4 in walls at all levels for all kinds of work, including labour, materials, equ
ipment, handling, transporting, batching, mixing, placing, levelling, compacting, curing, dewatering, testing and rendering or clean
ing etc., for all leads and lifts complete as per specification, drawings and instructions of the Engineer, but excluding staging, s
huttering and reinforcement work.#a) 1:2:4 (with 20 mm nominal size graded stone aggregates)#
25 Proiding & placing reinforcement in RCC 8.000 MT Basic Price,Service Ta
Providing and placing reinforcement, in reinforced concrete work, at all levels, for all kinds of work, including transportation, cl
eaning, straightening, cutting, bending, binding in position with annealed wire and/or welding, providing concrete cover blocks, pin
s, separators, chairs, supports for reinforcement etc. with all materials, labour, equipment, handling, transporting, testing etc. p
reparation of bar bending schedules, all complete as per specifications, drawings and instructions of the Engineer.#a) High strength
deformed bars#
26 Providing and fixing formwork 350 M2 Basic Price,Service Ta
Providing and fixing formwork of approved quality for cast-in-situ, plain or reinforced concrete works of any type and section (incl
uding curved surfaces), including labour, materials, equipment, wastage for forms, shoring, strutting, scaffolding, staging, tieing,
nailing, caulking, bolting, etc. and removal of formwork and staging, etc., all complete as per specifications, drawings and instru
ctions of the Engineer.#
27 12mm thick cement plaster 1:6 3,500 M2 Basic Price,Service Ta
12mm thick cement plaster with 1:6 cement mortar (1 cement: 6 coarse sand)
28 Providing and installing piezometers 8 EA Basic Price,Service Ta
Providing and installing in position porous tube piezometers at specified locations including drilling cased bore holes of 100 mm di
ameter, cleaning them assembling porous tube and PVC pipe of about 12.0 metre length with couplings, cleaning and driving out air fr
om the pores of porous tube, pouring clean saturated coarse sand around the porous tube, backfilling with cement sand grout (1cement
: 4sand) around the PVC pipe, providing removable cover for the PVC pipe and casing, and fabricating and installing of brass botto
m plug, brass adapter, cost of the portion of steel casing pipe to be left in the bore hole, including the cost of all labour, equip
ment, materials, transportation to site etc. all leads & lifts complete as per specification, drawings and as directed by the Engine
Ref:40073513 Date:22.05.2017

Item No Item Text Qty Unit Conditions

er.
29 Prov & installing settlement recorders 8 EA Basic Price,Service Ta
Providing and installing in position the surface settlement points of 1.0 metre depth at specified locations, including drilling hol
es and backfilling with with 1:2:4 cement concrete and cost of all labour, equipment, materials, transportation to site all leads &
lifts etc. complete as per specifications and drawing
30 Providing & fabricating structural steel 1.000 MT Basic Price,Service Ta
Providing, fabricating, transporting, erecting and installing, at all elevations miscellaneous Mild Steel parts including any rolled
sections, lugs, insert plates, hand railings etc to be embedded in concrete for all kind of works including the cost of all labour,
material and equipment, setting material in concrete, layout, scaffolding, handling at site, cutting, forming, grinding, drilling,
bolting, welding, testing, application of primer coat on exposed surfaces, etc., all complete as per drawings and specifications an
d instructions of the Engineer.#i) Structural steel sections/plates/pipes#
31 Dismantling of CC 1:3:6 or richer 8 M3 Basic Price,Service Ta
Dismantling of the following works and stacking the serviceable materials.#concrete 1:3:6 or richer#
32 Dismantling Brick work 2,000 M3 Basic Price,Service Ta
Dismantling of the following works and stacking the serviceable materials.#Brick work
33 Dismantling Turf sods 150,000 M2 Basic Price,Service Ta
Dismantling of the following works and stacking the serviceable materials.#Turf sods#
34 Prov & laying NP2class 300 dia RCC pipes 200 RMT Basic Price,Service Ta
Providing and laying NP2 class RCC pipes of 300 diameter with collars including positioning the pipes, jointing with cement mortar 1
:2 (1, cement : 2 fine sand) including back filling with available earth, watering, rolling etc.. Complete
35 Providing 6KL capacity watertankers 1,620 D Basic Price,Service Ta
Providing water tanker in running condition with 6 trips per day (average), having minimum capacity of 6KL along with water filling
arrangement and engaging 5 manpower for sprinkling water including discharge pipe & its handling upto minimum 200M length, includin
g cost of all type of maintenance, spares, lubricant, operator/driver, road taxes etc. required for the same and any other cost for
running of vehicle and 5 hp pump etc. including the fuel(diesel),oil etc. complete.
36 Providing and laying bottom ash 75,000 M3 Basic Price,Service Ta
Providing and laying bottom ash satisfying filter criteria on slope of dyke embankment for filter including preparation of borrow a
rea, stripping, watering of borrow area, excavation of approved quality of material from borrow area, using poclains or any oth
er mechanical means, loading, unloading, transporting by dumpers, trucks etc., surface watering/ dewatering, lowering of water
level to at least 0.5 m below the bottom of the working level, including construction of cofferdams wherever required, depositin
g the fill material on the area to be filled, spreading by dozers or grader in layers not exceeding 30 cm in compacted thickness w
ith all leads and lifts etc., complete as per specifications & drawings and as directed by the Engineer.