MOTION CONNECT 500
MLFB-Ordering data 6FX5002-2CF02-1DA0
Figure similar
Client order no. : Item no. :
Order no. : Consignment no. :
Offer no. : Project :
Remarks :
Electrical data
Design of the sensor Resolver 2-pole
Test voltage, rms Signal conductors 500 V
Rated voltage U0/U in accordance with EN 50395 Power conductors 30 V
Mechanical data
Type of connection cable engine side M23 full thread
Type of connection cable converter side SUB-D
Maximum cable outer diameter 9.2 mm
Smallest bending radius (fixed installation) 60 mm
Smallest bending radius (flexible installation) 100 mm
Number of bends, max. 2,000,000
Maximum traversing velocity 180 m/min
Acceleration horizontal, max 5 m/s²
Tensile stress, max. Fixed installation 50 N/mm²
Tensile stress, max. Flexible installation 20 N/mm²
Torsional stress Absolute 30°/m
Length 30.0 m
Technical data are subject to change! There may be discrepancies between calculated and rating plate values.
Page 1 of 2 Generated Tue Apr 16 13:11:39 CEST 2024
MLFB-Ordering data 6FX5002-2CF02-1DA0
Figure similar
Technical data
Ambient temperature
Operation with permanently installed cable -20 ... 80 °C
Operation with moving cable 0 ... 60 °C
Storage -20 ... 80 °C
Kind of connection cable Basis cable
Material of the cable sheath PVC DESINA-Color green RAL 6018
Type of insulation Without CFC and silicone
Standard for behavior in fire: flame resistance EN 60332-1-1 to 1-3
Oil resistance EN 60811-2-1 (mineral oil only)
Verification of suitability as authorisation for USA UL758, cURus with AWM-Style
Verification of suitability as authorisation for Canada CSA-C22.2-N.210.2-M90
Technical data are subject to change! There may be discrepancies between calculated and rating plate values.
Page 2 of 2 Generated Tue Apr 16 13:11:39 CEST 2024