J&H MOD III HDF Dual Rotor Chain Mill
HDF
Designed for long life and ease of
Quick release, slide-out maintenance
shaft Versatile and customizable to your
Fixed bearings eliminate needs
alignment problems Manufactured utilizing state of the art
Solid welded construction robotic welders and laser cutting equip-
and welded stainless steel ment
liners in non-impact zones The perfect solution for retro-fit appli-
provide exceptional dura- cations where space is of concern
bility and life
Full-width specially
blended rubber impact The J&H HDF Chain Mill is a dual rotor crushing ma-
pads covering the entire chine driven by two electrical motors ranging in power
impact area for easy re- from 25 to 125 hp each. Both rotors are equipped with a
placement and durability series of special hardened steel chain strands that are ro-
Full-width, center hung
tating in opposite directions, such apposing velocities
generate a centergistic crushing zone.
side access doors that can
be handled by one person
HDF Chain mills are designed to reduce the size of falling
Capacity in our largest material by chain and material impact. Built in four differ-
42” can handle up to 120 ent designs with widths ranging in six-inch increments
tph from 24” to 42” according to the models, handling capaci-
Available from 24” to 42” ties up to 120 tph in our largest.
according to capacity re-
quirements Our HDF Chain Mill has a smaller footprint than our HD
Chain Mill to accommodate locations where space is an
The number and configu- issue while maintaining the same capacity and durability
ration of chains are specif- as the HD Chain Mill. Featuring a quick release, slide-out
ically determined to main- shaft and large access doors located on the side of the
tain the balance of the machine provide considerable access to all of the neces-
rotors and to increase sary points that require service. Its motors are also located
chain life by distributing on top of the mill body to maintain full accessibility to all
external and internal parts of the mill.
the material impact over a
larger area of the chain.
Our HDF Chain Mill utilizes a technically proven vibra-
tion absorbing pad which is incorporated into its bottom
flange. This technology combined with high-speed, bal-
anced rotors maintains vibrations to a reduced level. Fixed
bearings eliminate alignment problems.
Incorporating over 40 years of experience, the J&H chain
mills are robust, reliable, and efficient.
J&H Equipment Inc. ●140 Sunshine Way ● Alpharetta, GA 30005 ●
(770) 992-1606 ● Fax (770) 992-1983
Web Site: www.jhequipment.com
