PowerTech ™
6068TF250 Diesel Engine
Generator Drive Engine Specifications
Engine dimensions
6068TF250 shown
Certifications
CARB
EPA Tier 1
Dimensions may vary according to options selected. Call your
distributor for more information.
General data
Model 6068TF250 Length - mm (in) to rear of block 1117 (44.0)
Number of cylinders 6 Width - mm (in) 598 (23.5)
Displacement - L (cu in) 6.8 (415) Height-- mm (in) 984 (38.7)
Bore and Stroke-- mm (in) 106 x 127 (4.17 x 5.00) Weight, dry-- kg (lb) 533 (1175)
Compression Ratio 17.0:1
Engine Type In-line, 4-Cycle
Aspiration Turbocharged
Performance data range
Engine power Rated fan power Calculated generator set output
Rated Generator Power
speed Prime Standby efficiency Prime Standby
factor
Hz(rpm) kW hp kW hp % kW hp kWe* kVA kWe kVA
60(1800) 112-128 150-172 124-142 166-190 88-92 6.3-7.1 8-10 0.8 93-111 116-139 103-124 129-155
Prime power is the nominal power an engine is capable of Standby power is the maximum engine power available at
delivering with a variable load for an unlimited number of hours varying load factors for up to 200 hours per year when applied
per year. This rating conforms to ISO3046 and SAE J1995. to conform with ISO 8528-1. This rating conforms to ISO 3046
and SAE J1995. Calculated generator set rating range for
standby applications is based on minimum engine power
(nominal -5 percent) to provide 100 percent meet-or-exceed
performance for assembled standby generator sets.
*Electrical power is calculated from the typical generator
efficiency and fan power percentages shown. Applications may
vary.
Photographs may show non-standard equipment.
Features and benefits
Dynamically Balanced Crankshaft Compact Size
- Induction-hardened journals for long hours of reliable service - High mount or low mount turbocharger position to meet packaging
requirements
- Robust design to drive machinery from the front of the crankshaft
- Supported by five main bearings World-class Performance
Forged-steel Connecting Rods - Excellent fuel economy and low oil consumption
- 45-degree connecting rod/cap-joint design allows the use of large Fuel System Controls
connecting rod bearings for increased durability - Proven and Reliable Mechanical Governor
Replaceable Wet-type Cylinder Liners - 3-5% Droop Governing
- Provide excellent heat dissipation - 12V or 24V Electric Shutoff
- Precision machined for long life Emissions
- Rebuild to original specifications - CARB & EPA Certified
Easy to A pply, Easy to Install
- Front and rear engine mounting pads on the side of the block facilitates
installation
- Auxiliary drive rated to 50 HP (37 kW) intermittent for powering ancillary
equipment
- Either side service for filters and service points facilitates packaging
- All connection points in common locations make it easy to install or package
John Deere Power Systems John Deere Power Systems All values at rated speed and power with standard options unless otherwise noted.
3801 W. Ridgeway Ave. Usine de Saran Specifications and design subject to change without notice.
PO Box 5100 La Foulonnerie - B.P. 11.13
Waterloo, IA 50704-5100 45401 Fleury les Aubrais Cedex
Phone: 1-800-533-6446 France
Fax: 319.292.5075 Phone: 33.2.38.82.61.19 Litho in U.S.A. (15-12) © 2015 JOHN DEERE
Fax: 33.2.38.82.60.00
