Scribd
Upload
40 views3 pages

Steel Grade: Material Data Sheet

The document provides information about the steel grade 42MnV7, including its general information, chemical composition, mechanical properties, transformation temperatures, sustainability and environmental impact data, and other typical properties. It also provides contact information for Ovako.

Uploaded by

l.raick
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views3 pages

Steel Grade: Material Data Sheet

The document provides information about the steel grade 42MnV7, including its general information, chemical composition, mechanical properties, transformation temperatures, sustainability and environmental impact data, and other typical properties. It also provides contact information for Ovako.

Uploaded by

l.raick
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Last revised: Mon, 27 Jun 2022 15:15:27 GMT

Material data sheet


Steel grade

All
42MnV7*
General Information

SB42MnV7 is a micro-alloyed steel for general purposes without any specified mechanical properties. Its closest
equivalent is found in W.Nr 1.5223.

* Designation followed by “ * ” is not an official EN standard grade but named according to the rules in EN
10027.”

Similar designations
1.5223, 40Mn7*, S590*

Chemical composition
Variant Cast Weldability C% Si % Mn % P% S% V%
CEV 0.73max Min 0.38 0.15 1.60 - - 0.070
SB42MnV7 CC
Pcm 0.53max Max 0.45 0.35 1.80 0.035 0.035 0.120
Mechanical Properties

Variant Format Dimension [mm] Yield strength min [MPa] Tensile strength [MPa] Elongation A5 [%] Hardness
Condition
Round bar 15 < 70 600** 900-1050 10 270-320 HB
SB42MnV7 +AR Flat bar 5 < 10 570* 850-1050 8 255-320 HB
Flat bar 11 < 30 560* 800-1050 9 240-320 HB
Rp0.2 * Reh, ** Re l

Transformation temperatures
Temperature °C
MS 310
AC1 712
AC3 753
SUSTAINABILITY-ENVIRONMENTAL IMPACT DATA
At Ovako sustainability and reduction of our environmental impact is a major focus in everything we do.
Further information is found here.

In many international comparisons the crude steel Scope 1-2 emission is a key parameter, ie. the CO2 emission
from the steel works itself.
As of 1 January 2022 we carbon offset all our scope 1 and 2 volume shown below.

Steel works Hofors Smedjebacken Imatra


CO2e/kg 120 62 76

To get the full picture of our products environmental impact we have to look at all of our CO2 emission sources.
Not only the steel work Scope 1-2 itself, but all operations downstream in our production, heating and heat
treatment furnaces etc (full scope 1-2) as well as all the emission from input material, eg. alloys, scope 3.

Steel  Scope 1-3 (CO2e kg /1000 Climate compensated Net emission = Scope 3 (CO2e kg /1000 kg steel)
Format
Grade Condition kg steel) Scope 1 - 2 = 0 (compensated)
Flat
SB42MnV7 +AR 558 191
bar

As of 1 January 2022 we use carbon offset for all our scope 1- 2 emissions, so in practice the climate
compensated data is the same as the full Scope 3 level.
All above data are to be seen as typical values for the specified format and condition. Detailed information about
your specific product please contact your sales contact.

Other properties (typical values)


Youngs module (GPa) Poisson´s ratio (-) Shear module (GPa) Density (kg/m3)
210 0.3 80 7800
Average CTE 20-300°C Specific heat Thermal conductivity Ambient Electrical resistivityAmbient
(µm/m°K) capacity 50/100°C (J/kg°K) temperature (W/m°K) temperature (µΩm)
12 460 - 480 40 - 45 0.20 - 0.25

Contact us
Would you like to know more about our offers? Don´t hesitate to contact us:

Via e-mail: [email protected]

Via telephone: +46 8 622 1300

For more detailed information please visit http://www.ovako.com/en/Contact-Ovako/

Disclaimer
The information in this document is for illustrative purposes only. The data and examples are only general recommendations and not a
warranty or a guarantee. The suitability of a product for a specific application can be confirmed only by Ovako once given the actual
conditions.The purchaser of an Ovako product has the responsibility to ascertain and control the applicability of the products before
using them. Continuous development may necessitate changes in technical data without notice. This document is only valid for Ovako
material. Other material, covering the same international specifications, does not necessarily comply with the properties presented in
this document.

You might also like