Introduction to the Slot Layout
of the OptiX OSN 1800 V
The OSN 1800 V is a new product in the
OSN 1800 product family and is MS-OTN
equipment. It has more slots than other
OSN 1800 products.
What is the slot layout of the OSN 1800 V?
5U
First 5 U case-shaped
WDM equipment in the
industry
Let's start with the front panel
of the OSN 1800 V.
To meet the requirements of flexible
deployment, the OSN 1800 V supports both
DC and AC power supplies.
7 50 Gbit/s 14 50 Gbit/s
6 50 Gbit/s 13 50 Gbit/s
DC 5 50 Gbit/s 12 50 Gbit/s
4 50 Gbit/s 11 50 Gbit/s
configuration FAN 16 Cross-connect board
(working with 15 Cross-connect board
3 50 Gbit/s 10 50 Gbit/s
the PIU) 2 50 Gbit/s 9 50 Gbit/s
1 50 Gbit/s 8 50 Gbit/s
17 PIU 18 PIU 19
7 50 Gbit/s 14 50 Gbit/s
6 50 Gbit/s 13 50 Gbit/s
AC 5 50 Gbit/s 12 50 Gbit/s
4 50 Gbit/s 11 50 Gbit/s
configuration FAN 16 Cross-connect board
(working with 15 Cross-connect board
3 50 Gbit/s 10 50 Gbit/s
the APIU) 2 50 Gbit/s 9 50 Gbit/s
17 APIU 19 APIU
The OSN 1800 V supports a maximum of 15
service slots. Its capacity reaches 700 Gbit/s
ODUk/PKT, 280 Gbit/s SDH higher order
cross-connections, and 5 Gbit/s SDH lower
order cross-connections.
Next, let's have a look at the main boards
supported by the OSN 1800 V.
System Control, Switching, and
Cross- UXCM Timing Boards-ODUk,PKT,VC4&VC12
connect
Boards System Control, Switching, and
XCH
Timing Boards-ODUk
Enhanced 8 x Multi-rate Ports
ELOM
Wavelength Conversion Board
Optical
LDX 2 x 10 Gbit/s Wavelength Conversion
Transponder
Board
Boards
Double 4 x Multi-rate Ports
LQM2
Wavelength Conversion Board
ND2 2 x 10G Line Service Processing Board
OTN 8 Any-rate Ports Service Processing
Tributary/Line TOA
Board
Boards
TQX 4 x 10G Tributary Service Processing
Board
Universal Universal 4 x 10G Universal Line
HUNQ2
Line Board Service Processing Board
Packet 8 x 10GE+12xGE or 20xGE/FE
EM20
Boards Ethernet Switching Processing Board
SP3D 42 x E1/T1 Electrical Interface Board
PL3T 3 x E3/T3 Electrical Interface Board
SL1Q 4 x STM-1 Optical Interface Board
TDM SL4D 2 x STM-4 Optical Interface Board
Boards
4-Port STM-16/8-Port STM-4/8-Port
SLNO
STM-1 Line Board
SL64D 2 x STM-64 Optical Interface Board
EGS4 4xGE Switching and Processing Board
Boards not listed in the preceding table
are similar to those of traditional WDM
products and therefore are not
described here.
Are there any restrictions on the installation
of different service boards in different slots?
The cross-connect boards, power boards,
and fan boards are installed in fixed slots.
There are some restrictions on the
installation of other service boards.
Let me introduce you the restrictions.
Because slot 19 has no cross-connect service
1 bus, it cannot house a packet board, tributary
board or line board in the case of DC
configuration.
7 14
6 13 No packet board,
5 12
4 11 tributary board,
FAN 16 Cross-connect board or line board
15 Cross-connect board
3 10 allowed in this
2 9 slot.
1 8
17 PIU 18 PIU 19
SL1Q, SL4D, SP3D, and PL3T boards can be
2 installed only in slots 2-3 and slots 9-10.
7 14
6 13
5 12
4 11
FAN 16 Cross-connect board
15 Cross-connect board SL1Q, SL4D,
3 10
2 9
SP3D, and PL3T
1 8
17 PIU 18 PIU 19
3 In consideration of heat dissipation, HUNQ2
boards can be installed only in slots 8-14.
7 14
6 13
5 12
4 11
FAN 16 Cross-connect board
15 Cross-connect board
3 10 HUNQ2
2 9
1 8
17 PIU 18 PIU 19
4 An EM20 board occupies two slots.
=2x
Volume
Board occupying Board occupying
two slots one slot
The slot ID of an EM20 board displayed on the
NMS is the ID of the slot at the lower position.
Visit http://support.huawei.com and
search for “OSN 1800 V Planning Your
Network”to learn more.
Fixed Network Information Dept.
1800 V Product Manuals
[email protected] Introduction to the Slot Layout
of the OptiX OSN 1800 V
The OSN 1800 V is a new product in the
OSN 1800 product family and is MS-OTN
equipment. It has more slots than other
OSN 1800 products.
What is the slot layout of the OSN 1800 V?
5U
First 5 U case-shaped
WDM equipment in the
industry
Let's start with the front panel
of the OSN 1800 V.
To meet the requirements of flexible
deployment, the OSN 1800 V supports both
DC and AC power supplies.
7 50 Gbit/s 14 50 Gbit/s
6 50 Gbit/s 13 50 Gbit/s
DC 5 50 Gbit/s 12 50 Gbit/s
4 50 Gbit/s 11 50 Gbit/s
configuration FAN 16 Cross-connect board
(working with 15 Cross-connect board
3 50 Gbit/s 10 50 Gbit/s
the PIU) 2 50 Gbit/s 9 50 Gbit/s
1 50 Gbit/s 8 50 Gbit/s
17 PIU 18 PIU 19
7 50 Gbit/s 14 50 Gbit/s
6 50 Gbit/s 13 50 Gbit/s
AC 5 50 Gbit/s 12 50 Gbit/s
4 50 Gbit/s 11 50 Gbit/s
configuration FAN 16 Cross-connect board
(working with 15 Cross-connect board
3 50 Gbit/s 10 50 Gbit/s
the APIU) 2 50 Gbit/s 9 50 Gbit/s
17 APIU 19 APIU
The OSN 1800 V supports a maximum of 15
service slots. Its capacity reaches 700 Gbit/s
ODUk/PKT, 280 Gbit/s SDH higher order
cross-connections, and 5 Gbit/s SDH lower
order cross-connections.
Next, let's have a look at the main boards
supported by the OSN 1800 V.
System Control, Switching, and
Cross- UXCM Timing Boards-ODUk,PKT,VC4&VC12
connect
Boards System Control, Switching, and
XCH
Timing Boards-ODUk
Enhanced 8 x Multi-rate Ports
ELOM
Wavelength Conversion Board
Optical
LDX 2 x 10 Gbit/s Wavelength Conversion
Transponder
Board
Boards
Double 4 x Multi-rate Ports
LQM2
Wavelength Conversion Board
ND2 2 x 10G Line Service Processing Board
OTN 8 Any-rate Ports Service Processing
Tributary/Line TOA
Board
Boards
TQX 4 x 10G Tributary Service Processing
Board
Universal Universal 4 x 10G Universal Line
HUNQ2
Line Board Service Processing Board
Packet 8 x 10GE+12xGE or 20xGE/FE
EM20
Boards Ethernet Switching Processing Board
SP3D 42 x E1/T1 Electrical Interface Board
PL3T 3 x E3/T3 Electrical Interface Board
SL1Q 4 x STM-1 Optical Interface Board
TDM SL4D 2 x STM-4 Optical Interface Board
Boards
4-Port STM-16/8-Port STM-4/8-Port
SLNO
STM-1 Line Board
SL64D 2 x STM-64 Optical Interface Board
EGS4 4xGE Switching and Processing Board
Boards not listed in the preceding table
are similar to those of traditional WDM
products and therefore are not
described here.
Are there any restrictions on the installation
of different service boards in different slots?
The cross-connect boards, power boards,
and fan boards are installed in fixed slots.
There are some restrictions on the
installation of other service boards.
Let me introduce you the restrictions.
Because slot 19 has no cross-connect service
1 bus, it cannot house a packet board, tributary
board or line board in the case of DC
configuration.
7 14
6 13 No packet board,
5 12
4 11 tributary board,
FAN 16 Cross-connect board or line board
15 Cross-connect board
3 10 allowed in this
2 9 slot.
1 8
17 PIU 18 PIU 19
SL1Q, SL4D, SP3D, and PL3T boards can be
2 installed only in slots 2-3 and slots 9-10.
7 14
6 13
5 12
4 11
FAN 16 Cross-connect board
15 Cross-connect board SL1Q, SL4D,
3 10
2 9
SP3D, and PL3T
1 8
17 PIU 18 PIU 19
3 In consideration of heat dissipation, HUNQ2
boards can be installed only in slots 8-14.
7 14
6 13
5 12
4 11
FAN 16 Cross-connect board
15 Cross-connect board
3 10 HUNQ2
2 9
1 8
17 PIU 18 PIU 19
4 An EM20 board occupies two slots.
=2x
Volume
Board occupying Board occupying
two slots one slot
The slot ID of an EM20 board displayed on the
NMS is the ID of the slot at the lower position.
Visit http://support.huawei.com and
search for “OSN 1800 V Planning Your
Network”to learn more.
Fixed Network Information Dept.
1800 V Product Manuals
[email protected]
