Bellacide® 355
Innovative Non-Oxidizing Biocide for Industrial Water Systems
Description Usage
Bellacide 355 is a high performance broad Typical Dosage: 250 ppm
spectrum biocide, which is fast acting, long lasting
with superior activity compared to other non- *Please consult with your BWA Water Additives
oxidizing biocides. representative to determine optimal dosage
recommendations for your system.
Application
Bellacide 355 is a concentrated 5% active non- Packaging / Weight
oxidizing biocide containing tributyl tetradecyl Pail 42 lb 19 kg
phosphonium chloride (TTPC): Drum 450 lb 200 kg
Cost effective, broad spectrum of activity IBCs/Totes 2,750 lb 1,000 kg
effective against aerobic bacteria (including *Consult your sales representative for availability.
Legionella pneumophila), anaerobic bacteria,
algae and fungi.
Good cleaning action due to surface active Physical Properties
properties and low foaming properties make it Appearance Clear, colorless liquid
suitable for cleaning cooling systems, which are Odor Slight
heavily fouled with microbiological slimes. Active content 4.9-5.1% w/w
Highly effective against problematic organisms. Specific gravity 0.98-1 at 20/20°C
Compatible and easy to use across a broad pH pH of undiluted 6.0-8.0 at 20°C
range. Bellacide 355 is not affected by the pH of product
the system water (pH 5 to 12) and can be used Viscosity 55-65mm²/s at 25°C
with oxidizing agents such as chlorine. Boiling range 100°C (212°F)
No contribution to TOC loading and filtration aid (760 mm Hg)
in closed loop systems because re-growth is Solubility in:
dramatically reduced and Bellacide 355 does not - Water Ready Soluble
contribute to the total organic carbon (TOC) load. - pH limitations 2-12
** Legionella control is based on an independent third
party lab, and not a guarantee of results in field use. Further details are available in the safety data sheet
Benefits
Bellacide 355 is a high performing
multifunctional surface active biocide for
industrial water systems, which is compatible
with halogens and provides a low cost treatment
for open and closed cooling systems.
Lenntech
[email protected]
[email protected] Tel.
Tel. +31-152-610-900
+31-152-610-900
www.lenntech.com
www.lenntech.com Fax.
Fax.+31-152-616-289
+31-152-616-289
Patents:
BWA Water Additives (BWA) owns or is the licensee of patents and patent applications, which may cover the products and/or use s described in this brochure.
The following are registered trademarks of BWA Belclene, Belcor, Belgard, Belite, Bellacide, Bellasol, Belsperse, BromiCide, Flocon, Geogard and Liquibrom Drop and Swirl logo. ® Registered US
Patent and Trademark Office. © 2016 BWA all rights reserved.
The information contained in this product sheet is based on data available to BWA Water Additives at the time of publication. While BWA has made every effort to ensure this information is correct,
no responsibility can be accepted by BWA for any loss or liability occasioned by any person acting or refraining from acting as a result of the contents of this publication. BWA cannot guarantee that
the results described in this information will be achieved by others if BWA has not participated in the testing pro cess. BWA therefore makes no warranty of merchantability or fitness for a particular
purpose or any express or implied warranty in respect of this information. This information is intended for use by technical ly trained personnel at their discretion and risk and is not a substitute for
specific professional or technical advice. BWA’s liability shall be limited by its standard limitations of liability containe d within its standard terms and conditions of sale if BWA makes any sales to you.
© 2016 all rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means or stored in any retrie val system without the prior written permission of BWA
Water Additives UK Limited. BWA Water Additives UK Limited is a private limi ted company registered in England and Wales at 2 Brightgate Way, Manchester M32 0TB, Registered No. 5657343.
