2024

Bihar Combined Entrance Competitive Exam.-2024

(B. C. E. C. E. – 2024)

2024–2025






 BCECE-2024

1. 1 3
2. 2 4
3. 3 4
4. 4 4
5. 5 5-7
6. 6 7
7. 7 7-9
8. 8 9-12
9. 9 12
10. 10 13
11. 11 14
12. 12 14
13. 13 14-16

14. 14 16

15. 15 16-17

16. 1 3 18-30
17. 31.45
18. (i) (ii) 46-54
19. (iii) 55
20. 56-58
21. EWS 59
22. 60
23. Certificate of Disability 61
24. 7 62
*******
 1

LIST OF ENCLOSURES (CHECK LIST)

Sl.N. Particulars of Enclosures Persons/ organisations from

Where it should be obtained

1. (i) Marks Sheet and Admit Card of I.Sc. or equivalent examination (only Relevant University / Council / Board or
Admit Card in the case of candidates appearing in qualifying examination.) its equivalent
(Admit Card)
(Qualifying)
(*ii) In case of appearing candidates in the qualifying Examination, a Principal of the Institution concerned
certificate clearly mentioning the subjects and stating that the result
of such examination has not been published.
(Qualifying)

2. Matric/ equivalent certificate and Admit Card as proof of age and Identity Board / Equivalent.

3. *Caste certificate Issued by the Concerned C.O./ Revenue

Officer of Permanent residence.
*

4. Income & Assest Certificate to be produced by Economically Weaker Section Issued by concerned DM / SDM / C.O./
Revenue Officer of permanent resident in
prescribed proforma.

5. Character certificate
Head of Institution last attended.

6. *Income certificate (If needed, to be submitted at the time of Counselling) Issued by the Concerned C.O./ Revenue
Officer of Permanent residence.
*

7. Application Form (Part-A) Duly filled in by the candidate and photo

A pasted on specified place on it.

8. Photograph (As per para 8.2 of the prospectus) Self attested by the candidate.
[
Issued by the Concerned C.O./ Revenue
9. *(i) Certificate for native of Bihar
Officer of Permanent residence.

* NOTE : To be furnished, wherever applicable.

 2

Sl.N. Particulars of Enclosures Persons/ organisations from

Where it should be obtained

*(ii) Refugee Registration certificate DM/ Refugee Registration Officer

*(iii) Certificate showing that the applicant's parent is an employee of Employer Concerned.
the Govt. of Bihar.
(Employee)

*(iv) Certificate showing that the applicant's parent is an employee of Employer Concerned.
Govt of India and posted in Bihar or an employee of any Public
Sector Undertaking of the Govt. of India and posted in Bihar.
(Employee)
(Employee)

*(v) Certificate showing that the applicant's parent is an employee of Employer Concerned.
the United Nations Organisation and that he/ she is at present posted
in Bihar.

(Employee)
*(vi) Such candidates who have not studied in Bihar but claim eligibility Principal of the Institution concerned.
on ground of permanent/ 10 years or more of continuous residence
in Bihar in respect of their parents, must also furnish a certificate
from the Institution where he/ she is studying for the qualifying
examination indicating the permanent address as recorded in the
Admission Register of that Institution.

(Eligibility) (Qualifying)

*(vii) Certificate for Servicemen's Quota (SMQ), clearly mentioning the As per para 5.7 of this prospectus.
relationship of the candidate.
(SMQ)

*(viii) Certificate for Disabled Quota (DQ) As per Para 5.6 of this prospectus.
(DQ)

* Note : To be furnished wherever applicable.

 3

2024

(Bihar Combined Entrance

Competitive Exam.-2024)

B.Tech. (Dairy Technology) JEE (Main)

2024 PCM Group

Dr. APJ Abdul Kalam Womens Institute of
Technology, Navodaya Complex, Kameshwar Nagar, Darbhanga

1.
(i)
(ii)
(iii)
1.1
(i)
ii)
iii)
iv)
v)
vi) (Clause 4 of Bihar Reorganisation
Act-2000)
(vii)

(viii)

(ix)
 4

2.

3.

JEE (Main)
Online Counselling
2024 PCM Group Online
Counselling
4.
4.1
(I.Sc/ +2 / I.Sc. Ag. /
4.2 I.Sc.

(PCM)

4.2.1 I.Sc.

(PCB)

4.2.2 I.Sc. Agriculture

4.2.3 I.Sc.

(PCMB)

4.3
4.3.1
-----------------------------------------------------------------------------------------------------------------------------------------------

(i) 1½
(ii) 1½
(iii) 1½
(iv) 1½
(v) 1½
------------------------------------------------------------------------------------------------------------------------------------------------

100
 5

4.3.2 PCM
PCB

50%

50%
5.
5.1
submit

5.2 (Permanent resident)

Online [
]

– 20%
(Scheduled Caste : SC)

– 02%
(Scheduled Tribe : ST)

– 25%
(Extremely Backward
Class : EBC)

– 18%
(Backward Class : BC)

* – 10 %

(Reserved for Economically

Weaker Sections : EWS)

25 % (Unreserved Category : UR)

5.3
 6

5.4 i.

ii.

5.5 i. submit
SC/ST/EBC/BC (Category)
ii.

iii.

5.6 (Disabled Quota i.e. DQ)

5.6.1

5.6.2

Permanent loss of limbs Cerebral palsy

5.6.3

[
I II ]

Documents Verification

5.7 (Service Men’s Quota, i.e., SMQ)

5.7.1 (Service Men’s
Quota)

III
 7

5.7.2 SMQ
SMQ 2024
SMQ

SMQ
SMQ
SMQ
•
mandatory
I.

II.

5.7.3 (Ex.-Service Men)

As per the Extract of “A Guide To Resettlement of Ex-Service Men-1984” Ministry of Defence, Directorate General
Resettlement :
(i) An Ex-Service Man is a person who has served in any rank (whether as a combatant or as a non-combatant)
in the Armed Forces of the Union including the Armed Forces of the former Indian States (but excluding the
Assam Rifles, Defence Security Corps, General Reserve Engineering Force, Lok Sahayak and Territorial
Army) for a continuous period of not less than six months after attestation and has been recessed otherwise
than at his own request or by way of dismissal or discharge on account of misconduct or inefficiency or has
been transferred to the reserve pending such release or has to serve for not more than six months for
completing the period of service requisite for becoming entitled to be released or transferred to the reserve
or has been released at his own request after completing five years service in the Armed Forces of the Union.
(ii) Former Personnel of the Jammu & Kashmir Millitia are also now treated as “Ex-Service Men”.
(iii) Four Categories of Territorial Army personnel are now being treated as “Ex-Service Men” by the Ministry of
Defence.The Categories are :
(a) Pension Holders of the continuous embodied service.
(b) Disabled Territorial Army personnel with disability attributed to Military Service.
(c) Family Pension Holders.
(d) Gallantry Award Winners.
6.
6.1

13.5
14
15
6.2
7.
(Prospectus) Website : bceceboard.bihar.gov.in
Download Online "Online Application Portal of
BCECE-2024" Link Click "Apply Online" button click (Instruction)

i. Step-One (Registration) :
Registration Information Step-1
Registration email ID Mobile No.
Registration email ID Mobile No. Mobile No.
email ID (Verification Code)
Registration (Verification Code) Mobile No. email ID
Registration Mobile No. email ID
 8

Registration Registered Mobile No. email ID Registration

Online Account login
Registered email ID Regisration Password "Sign In" click
Registration Password
email ID User Name
ii. Step-Two (Personal Information) :
Registration Account Login Personal Information
required entries Submit & Continue Click
iii. Step-Three (Upload Photo & Signature) :
Personal Information
Scan Upload Placard
Upload Submit &
Continue Click
iv. Step-Four (Educational Information) :
Scan Upload Educational Information
Submit & Continue Click
v. Step-Five (Preview your Application) :
Educational Information Step-Two, Step-
Three Step-Four Back to Edit Click
Information Submit & Continue Click Update
Preview Declaration Confirm & Submit
Click Step-Six
vi. Step-Six (Payment of Examination Fee) :
Preview Submit Proceed to Payment Click
Payment
a. Online Payment : Online
UPI Payment Mode Online Option Select
UPI (Processing Charge)

b.
PCM (Physics,
Chemistry & Mathematics) PCB (Physics, Chemistry & Biology)
(CBA) (PCA)
(MBA) (MCA)
1000
DQ) Subject Group 500

PCMB
(Physics, Chemistry, Mathematics & Biology) Subject Group 1100

DQ) PCMB (Physics, Chemistry, Mathematics & Biology)

550
Examination / Counselling Fee
Examination / Counselling Fee
Examination / Counselling

Refund
Examination / Counselling Fee
Online application portal email ID : [email protected] email
Helpdesk phone no. 0612-2220230
 9

vii. Step-Seven (Download Part-A & Part-B) :

Hard Copy (Part-A Part-B) Download Print
Registration No.

(a) Download Hard Copy (Part-A Part-B)

(b) Online Application Form Submit Application

Form
(c) Application Form Submission Withdraw
Refund / Chargeback
(d)

viii. (i) Online Application Form Upload

Edit 23.05.2024 25.05.2024
(ii) Online Application Form Edit Online
Application Form
(iii) Online Application Form Edit Application Home Page Sign In button
Click email ID Password Submit Click Account Login
Submit & Continue Click Edit Entries Update Edited
Hard Copy Part-A Part-B) Download Print
ix. 2024
(i) Online Registration Starting Date : 19.04.2024
(ii) Online Registration Closing Date : 19.05.2024
(iii) Last date of payment through Net Banking / Debit Card / : 21.05.2024
Credit Card / UPI and submission of the Online Application
Form of Registered Candidate .
(iv) Online Editing of Application Form : 23.05.2024 to 25.05.2024
(v) Uploading of Online Admit Card : 28.06.2024
(vi) Proposed Date of Examination : 13.07.2024 14.07.2024
x. Online
8.
8.1 (CAPITAL LETTERS)
(CAPITAL LETTERS)
8.2
3.5 x
4.5 (Snap)
(Placard)

Rajendra Kumar
Date : .................
 10

Downloaded

8.3

(Spelling)
8.4

8.5 (Category)

(code)
(Category) (Code)
(i) Unreserved) UR
SC/ ST/ EBC/ BC/ EWS

(ii) Scheduled Caste SC

(iii) Scheduled Tribe ST
(iv) Extremely Backward Caste EBC
(v) Backward Caste BC
(vI) Economical Weacker Section EWS
(Disabled Quota i.e. DQ) (Service Men's Quota i.e. SMQ)

8.6 (category)

[Unreserved (UR)]
A B
A
8.6.1

8.7

8.8
 11

8.9 (Sex) :

i. Male
ii. Female
iii. Third gender

8.10

[ ]
8.11

(CAPITAL
LETTERS)
(Declaration)

8.12

(i)
(ii)

8.13

8.14
 12

8.15
(Eligible) (Admit Card) bceceboard.bihar.gov.in

8.16

(School / College Leaving Certificate)

9.
9.1
Website:
bceceboard.bihar.gov.in (valid)

Admit Card
Website : bceceboard.bihar.gov.in Download Admit Card of BCECE-2024,
Link Click Portal Registration No.
Submit Button Click Admit Card Download

Email Id Password Sign In Button Click Login Download Admit Card

Click Download
(Admit Card)

5 11.00 3.00

(Admit Card)

9.2 (OMR Answer Sheet)

9.3

9.4
9.4.1
9.5

9.6

9.7
9.7.(i)
PCM PCB
 13

%
9.8 (Re-evaluation) (Retotalling)

9.9

50%

(PCB)
(PCM)
(PCB)
(PCM)

9.10.1

1981

9.10.2

9.11

10.
10.1 (i)

"bceceboard.bihar.gov.in"

(ii)
(i)

(iii) (Identity)

(iv)

10.2
 14

11.
11.1

11.2

11.3

11.4 (College Leaving Certificate)

11.5
i. (PCM)
ii. (PCB)
iii. (PCMB)
iv. (CBA)
v. (PCA)
vi. (MBA)
vii. (MCA)
i ii iii iv v vi vii
11.6

11.7

11.8

11.9
11.10

11.11

11.12

11.13

11.14

11.15

11.16

12.

I.Sc.

13.
13.1(i)

B.Tech. (Dairy Technology) JEE (Main)

 15

2024 PCM Group

Dr. APJ Abdul Kalam Womens Institute of
Technology, Navodaya Complex, Kameshwar Nagar, Darbhanga
13.1(ii) 1C

13.2

submit

13.3
13.4 (SMQ)
13.5

I.
Passed 10+2 examination with Physics/ Mathematics/ Chemistry/ Computer Science/ Electronics/ Information
Technology/ Biology/ Informatics practices/ Biotechnology/ Technical Vocational Subject/ Agriculture /
Engineering Graphics / Business Studies / Entrepreneurship as per Annexure-7.
Agriculture stream (for Agriculture Engineering)
Obtained at least 45% marks (40% marks in case of candidates belonging to reserved category) in the above
subjects taken together.
OR
Passed min.3 years diploma examination with at least 45% marks (40% marks in case of candidates belonging
to reserved category) subject to vacancies in the first year, in case the vacancies at lateral entry are exhausted.
(The Universities will offer suitable bridge course such as mathematics physics engineering drawing, etc. for the
student coming from diverse backgrounds to prepare level playing field and desired learning outcomes of the
programme).
(II) Dr. APJ Abdul Kalam Women's Institute of Technology, Darbhanga
(a) Information Technology

(b) Computer Sc. & Engg.

III.
10 + 2 /
IV.
10 + 2 /

I.

II.

III.

IV.

V.
(Public Sector Undertaking of Govt. of India)

VI.
 16

13.6 (AICTE)
(Pharmacy Council of India)
14.
14.1

14.2
submit

ii)

14.3

14.4

(i) 10 + 2

(ii) 10 + 2 45%

(iii)

13.5 (i) (v)

31 17
15.

15.1
Paid
(Self Finance) NRI -3

B.Tech. (D.T.) (COF), B.F.Sc.

Self Finance NRI website

15.2
15
 17

50

I.Sc. (Agriculture)

15.3

15.4

(i)

(a) 50%

(b) 50%

(c) 50%

(d)
50%

(ii)

(a)

(b)

(iii)

13.5 (i) (vI)

16
 Page no.1/6
18

1A

Institute
Sl.no. INSTITUTION BRANCH Total no. of Seats
Type

B.C.E. BHAGALPUR GOVT. CIVIL ENGG. 120

B.C.E. BHAGALPUR GOVT. MECHANICAL ENGG. 60
B.C.E. BHAGALPUR GOVT. ELECTRICAL ENGG. 60
B.C.E. BHAGALPUR GOVT. ELECTRO & COMMUNICATION, ENGG. 60
B.C.E. BHAGALPUR GOVT. COMPUTER Sc. & Engg. 60
1 B.C.E. BHAGALPUR Total 360
M.I.T. MUZAFFARPUR GOVT. CIVIL ENGG. 60
M.I.T. MUZAFFARPUR GOVT. MECHANICAL ENGG. 60
M.I.T. MUZAFFARPUR GOVT. ELECTRICAL ENGG. 60
M.I.T. MUZAFFARPUR GOVT. ELECTRO & COMMUNICATION, ENGG. 40
M.I.T. MUZAFFARPUR GOVT. I.T. 60
M.I.T. MUZAFFARPUR GOVT. LEATHER TECH. 15
M.I.T. MUZAFFARPUR GOVT. BIOMEDICAL & ROBOTIC ENGG. 60
2 M.I.T. MUZAFFARPUR Total 355
G.C.E. GAYA GOVT. COMPUTER Sc. & Engg. 120
G.C.E. GAYA GOVT. ELECTRICAL & ELECTRONICS ENGG. 90
G.C.E. GAYA GOVT. MECHANICAL ENGG. 60
G.C.E. GAYA GOVT. CIVIL ENGG. 90
3 G.C.E.GAYA Total. 360
M..C.E. MOTIHARI GOVT. COMPUTER Sc. & Engg. 60
M..C.E. MOTIHARI GOVT. ELECTRICAL & ELECTRONICS ENGG. 60
M..C.E. MOTIHARI GOVT. MECHANICAL ENGG. 60
M..C.E. MOTIHARI GOVT. CIVIL ENGG. 60
M..C.E. MOTIHARI GOVT. CIVIL ENGG. WITH COMPUTER APPLICATION 60
M..C.E. MOTIHARI GOVT. COMPUTER Sc. & Engg. (AI) 60
4 M.C.E. MOTIHARI Total 360
D.C.E. DARBHANGA GOVT. COMPUTER Sc. & Engg. 60
D.C.E. DARBHANGA GOVT. ELECTRICAL & ELECTRONICS ENGG. 60
D.C.E. DARBHANGA GOVT. MECHANICAL ENGG. 60
D.C.E. DARBHANGA GOVT. CIVIL ENGG. 90
D.C.E. DARBHANGA GOVT. FIRE TECHNOLOGY & SAFETY 30
D.C.E. DARBHANGA GOVT. COMPUTER Sc. & Engg. (Cyber Security) 60
5 D.C.E, DARBHANGA Total 360
NALANDA COLLEGE. OF ENGG,CHANDI GOVT. ARTIFICIAL INTELLIGENCE & MACHINE LEARNING 60
NALANDA COLLEGE. OF ENGG,CHANDI GOVT. ELECTRICAL & ELECTRONICS ENGG. 60
NALANDA COLLEGE. OF ENGG,CHANDI GOVT. MECHANICAL ENGG. 60
NALANDA COLLEGE. OF ENGG,CHANDI GOVT. CIVIL ENGG. 60
NALANDA COLLEGE. OF ENGG,CHANDI GOVT. COMPUTER Sc. & Engg. 60
NALANDA COLLEGE. OF ENGG,CHANDI GOVT. AERONAUTICAL ENGG. 60
6 NALANDA COLLEGE OF ENGG, CHANDI, NALANDA 360
L.N.J.P.I.T. TECHNOLOGY. CHAPRA GOVT. COMPUTER Sc. & Engg. 120
L.N.J.P.I.T. TECHNOLOGY. CHAPRA GOVT. ELECTRICAL & ELECTRONICS ENGG. 60
L.N.J.P.I.T. TECHNOLOGY. CHAPRA GOVT. MECHANICAL ENGG. 60
L.N.J.P.I.T. TECHNOLOGY. CHAPRA GOVT. CIVIL ENGG. 60
L.N.J.P.I.T. TECHNOLOGY. CHAPRA GOVT. FOOD PROCESSING & PRESERVATION 60
7 L.N.J.P.I.T CHAPRA TOTAL 360
B.C.E. BAKHTIYARPUR GOVT. CIVIL ENGG. 90
B.C.E. BAKHTIYARPUR GOVT. COMPUTER Sc. & Engg. 60
B.C.E. BAKHTIYARPUR GOVT. ELECTRICAL & ELECTRONICS ENGG. 60
B.C.E. BAKHTIYARPUR GOVT. MECHANICAL ENGG. 60
 Page no.2/6

Institute
Sl.no. INSTITUTION BRANCH Total no. of Seats
Type

B.C.E. BAKHTIYARPUR GOVT. COMPUTER Sc. & Engg. (IOT) 60

B.C.E. BAKHTIYARPUR GOVT. FIRE TECHNOLOGY & SAFETY 30
8 B.C.E. BAKHTIYARPUR Total 360
S.I.T. SITAMARHI GOVT. CIVIL ENGG. 60
S.I.T. SITAMARHI GOVT. COMPUTER Sc. & Engg. 60
S.I.T. SITAMARHI GOVT. ELECTRICAL ENGG. 60
S.I.T. SITAMARHI GOVT. MECHANICAL ENGG. 60
S.I.T. SITAMARHI GOVT. CIVIL ENGG. WITH COMPUTER APPLICATION 60
S.I.T. SITAMARHI GOVT. COMPUTER Sc. & Engg.(AI & ML) 60
9 S.I.T. SITAMARHI Total 360
R.R.D.C.E. BEGUSARAI GOVT. CIVIL ENGG. 60
R.R.D.C.E. BEGUSARAI GOVT. COMPUTER Sc. & Engg. 60
R.R.D.C.E. BEGUSARAI GOVT. ELECTRICAL & ELECTRONICS ENGG. 60
R.R.D.C.E. BEGUSARAI GOVT. MECHANICAL ENGG. 60
R.R.D.C.E. BEGUSARAI GOVT. CHEMICAL ENGG. 60
R.R.D.C.E. BEGUSARAI GOVT. COMPUTER Sc. & Engg.(Data Science) 60
10 R.R.D.C.E. BEGUSARAI Total 360
S.C.E SASARAM GOVT. CIVIL ENGG. 60
S.C.E SASARAM GOVT. COMPUTER Sc. & Engg. 90
S.C.E SASARAM GOVT. ELECTRICAL & ELECTRONICS ENGG. 60
S.C.E SASARAM GOVT. MECHANICAL ENGG. 60
S.C.E SASARAM GOVT. ELECTRONICS ENGG. (VLSI DESIGN & TECHNOLOGY ) 30
S.C.E SASARAM GOVT. MINING ENGG. 60
11 S.C.E SASARAM Total 360
B.P.M.C.E. MADHEPURA GOVT. CIVIL ENGG. 60
B.P.M.C.E. MADHEPURA GOVT. COMPUTER Sc. & Engg. 60
B.P.M.C.E. MADHEPURA GOVT. ELECTRICAL & ELECTRONICS ENGG. 60
B.P.M.C.E. MADHEPURA GOVT. MECHANICAL ENGG. 60
B.P.M.C.E. MADHEPURA GOVT. 3-D ANIMATION & GRAPHICS 30
B.P.M.C.E. MADHEPURA GOVT. COMPUTER Sc. & Engg.(AI & ML) 60
B.P.M.C.E. MADHEPURA GOVT. CIVIL ENGG. WITH COMPUTER APPLICATION 30
12 B.P.M.C.E. MADHEPURA Total 360
K.C.E., KATIHAR GOVT. CIVIL ENGG. 60
K.C.E., KATIHAR GOVT. COMPUTER Sc. & Engg. 120
K.C.E., KATIHAR GOVT. ELECTRICAL & ELECTRONICS ENGG. 60
K.C.E., KATIHAR GOVT. MECHANICAL ENGG. 30
K.C.E., KATIHAR GOVT. FOOD PROCESSING & PRESERVATION 30
K.C.E., KATIHAR GOVT. MECHANICAL & SMART MANUFACTURING 30
K.C.E., KATIHAR GOVT. ELECTRONICS ENGG. (VLSI DESIGN & TECHNOLOGY ) 30
13 K.C.E., KATIHAR Total 360
PURNEA COLLEGE OF ENGG. GOVT. CIVIL ENGG. 60
PURNEA COLLEGE OF ENGG. GOVT. ELECTRICAL ENGG. 60
PURNEA COLLEGE OF ENGG. GOVT. MECHANICAL ENGG. 30
PURNEA COLLEGE OF ENGG. GOVT. ELECTRO & COMMUNICATION, ENGG. 60
PURNEA COLLEGE OF ENGG. GOVT. COMPUTER Sc. & Engg. 60
PURNEA COLLEGE OF ENGG. GOVT. COMPUTER Sc. & Engg. (AI) 60
PURNEA COLLEGE OF ENGG. GOVT. MECHATRONICS ENGG. 30
14 PURNEA COLLEGE Total 360
SAHARSA COLLEGE OF ENGG. GOVT. CIVIL ENGG. 60
SAHARSA COLLEGE OF ENGG. GOVT. ELECTRICAL ENGG. 60
SAHARSA COLLEGE OF ENGG. GOVT. MECHANICAL ENGG. 60
SAHARSA COLLEGE OF ENGG. GOVT. ELECTRO & COMMUNICATION, ENGG. 60
 Page no.3/6

Institute
Sl.no. INSTITUTION BRANCH Total no. of Seats
Type

SAHARSA COLLEGE OF ENGG. GOVT. COMPUTER Sc. & Engg. 60

SAHARSA COLLEGE OF ENGG. GOVT. COMPUTER Sc. & Engg.(Data Science) 60
15 SAHARSA COLLEGE Total 360
SUPAUL COLLEGE OF ENGG. GOVT. CIVIL ENGG. 90
SUPAUL COLLEGE OF ENGG. GOVT. ELECTRICAL ENGG. 60
SUPAUL COLLEGE OF ENGG. GOVT. MECHANICAL ENGG. 60
SUPAUL COLLEGE OF ENGG. GOVT. ELECTRO & COMMUNICATION, ENGG. 60
SUPAUL COLLEGE OF ENGG. GOVT. COMPUTER Sc. & Engg. (AI) 60
SUPAUL COLLEGE OF ENGG. GOVT. COMPUTER Sc. & Engg. 30
16 SUPAUL COLLEGE Total 360
GOVT. ENGG. COLLEGE, BANKA GOVT. CIVIL ENGG. 60
GOVT. ENGG. COLLEGE, BANKA GOVT. ELECTRICAL ENGG. 60
GOVT. ENGG. COLLEGE, BANKA GOVT. MECHANICAL ENGG. 60
GOVT. ENGG. COLLEGE, BANKA GOVT. ELECTRO & COMMUNICATION, ENGG. 60
GOVT. ENGG. COLLEGE, BANKA GOVT. COMPUTER Sc. & Engg. 60
GOVT. ENGG. COLLEGE, BANKA GOVT. COMPUTER Sc. & Engg. (IOT) 60
17 GOVT. ENGG. COLLEGE, BANKA Total 360
GOVT. ENGG. COLLEGE, VAISHALI GOVT. CIVIL ENGG. 60
GOVT. ENGG. COLLEGE, VAISHALI GOVT. ELECTRICAL ENGG. 60
GOVT. ENGG. COLLEGE, VAISHALI GOVT. MECHANICAL ENGG. 60
GOVT. ENGG. COLLEGE, VAISHALI GOVT. ELECTRO & COMMUNICATION, ENGG. 60
GOVT. ENGG. COLLEGE, VAISHALI GOVT. COMPUTER Sc. & Engg. 60
GOVT. ENGG. COLLEGE, VAISHALI GOVT. COMPUTER Sc. & Engg. (IOT) 60
18 GOVT. ENGG. COLLEGE, Vaishali Total 360
GOVT. ENGG. COLLEGE, JAMUI GOVT. CIVIL ENGG. 60
GOVT. ENGG. COLLEGE, JAMUI GOVT. ELECTRICAL ENGG. 60
GOVT. ENGG. COLLEGE, JAMUI GOVT. MECHANICAL ENGG. 60
GOVT. ENGG. COLLEGE, JAMUI GOVT. ELECTRO & COMMUNICATION, ENGG. 60
GOVT. ENGG. COLLEGE, JAMUI GOVT. COMPUTER Sc. & Engg. (IOT) 30
GOVT. ENGG. COLLEGE, JAMUI GOVT. COMPUTER Sc. & Engg.(Data Science) 30
GOVT. ENGG. COLLEGE, JAMUI GOVT. COMPUTER Sc. & Engg.(AI & ML) 60
19 GOVT. ENGG. COLLEGE, Jamui Total 360
GOVT. ENGG. COLLEGE, NAWADA GOVT. CIVIL ENGG. 120
GOVT. ENGG. COLLEGE, NAWADA GOVT. ELECTRICAL ENGG. 60
GOVT. ENGG. COLLEGE, NAWADA GOVT. ELECTRO & COMMUNICATION, ENGG. 60
GOVT. ENGG. COLLEGE, NAWADA GOVT. COMPUTER Sc. & Engg. 60
GOVT. ENGG. COLLEGE, NAWADA GOVT. MECHANICAL ENGG. 60
20 GOVT. ENGG. COLLEGE, NAWADA Total 360
GOVT.ENGG. COLLEGE KISHANGANJ GOVT. CIVIL ENGG. 60
GOVT.ENGG. COLLEGE KISHANGANJ GOVT. MECHANICAL ENGG. 60
GOVT.ENGG. COLLEGE KISHANGANJ GOVT. ELECTRICAL ENGG. 60
GOVT.ENGG. COLLEGE KISHANGANJ GOVT. ELECTRO & COMMUNICATION, ENGG. 60
GOVT.ENGG. COLLEGE KISHANGANJ GOVT. COMPUTER Sc. & Engg.(AI & ML) 60
GOVT.ENGG. COLLEGE KISHANGANJ GOVT. COMPUTER Sc. & Engg. 60
21 GOVT. ENGG. COLLEGE, KISHANGANJ Total 360
SHRI PHANISHWAR NATH RENU ENGG COLLEGE,
GOVT. ARARIA
CIVIL ENGG. 60
SHRI PHANISHWAR NATH RENU ENGG COLLEGE,
GOVT. ARARIA
MECHANICAL ENGG. 30
SHRI PHANISHWAR NATH RENU ENGG COLLEGE,
GOVT. ARARIA
ELECTRICAL ENGG. 60
SHRI PHANISHWAR NATH RENU ENGG COLLEGE,
GOVT. ARARIA
COMPUTER Sc. & Engg. 120
SHRI PHANISHWAR NATH RENU ENGG COLLEGE,
GOVT. ARARIA
MECHATRONICS ENGG. 30
SHRI PHANISHWAR NATH RENU ENGG COLLEGE,
GOVT. ARARIA
ELECTRO & COMMUNICATION, ENGG. 60
22 SHRI PHANISHWAR NATH RENU ENGGCOLLEGE, ARARIA TOTAL 360
 Page no.4/6

Institute
Sl.no. INSTITUTION BRANCH Total no. of Seats
Type

GOVT. ENGG.COLLEGE MUNGER GOVT. CIVIL ENGG. 120

GOVT. ENGG.COLLEGE MUNGER GOVT. MECHANICAL ENGG. 60
GOVT. ENGG.COLLEGE MUNGER GOVT. ELECTRICAL ENGG. 60
GOVT. ENGG.COLLEGE MUNGER GOVT. COMPUTER Sc. & Engg.(Data Science) 60
GOVT. ENGG.COLLEGE MUNGER GOVT. COMPUTER Sc. & Engg. (AI) 60
23 GOVT. ENGG. COLLEGE, MUNGERTotal 360
GOVT ENGG. COLLEGE SHEOHAR GOVT. CIVIL ENGG. 60
GOVT ENGG. COLLEGE SHEOHAR GOVT. MECHANICAL ENGG. 60
GOVT ENGG. COLLEGE SHEOHAR GOVT. ELECTRICAL ENGG. 60
GOVT ENGG. COLLEGE SHEOHAR GOVT. ELECTRO & COMMUNICATION, ENGG. 60
GOVT ENGG. COLLEGE SHEOHAR GOVT. CIVIL ENGG. WITH COMPUTER APPLICATION 60
GOVT ENGG. COLLEGE SHEOHAR GOVT. COMPUTER Sc. & Engg.(Data Science) 60
24 GOVT. ENGG. COLLEGE, SHEOHAR Total 360
GOVT ENGG COLLEGE W. CHAMPARAN GOVT. CIVIL ENGG. 60
GOVT ENGG COLLEGE W. CHAMPARAN GOVT. MECHANICAL ENGG. 60
GOVT ENGG COLLEGE W. CHAMPARAN GOVT. ELECTRICAL ENGG. 60
GOVT ENGG COLLEGE W. CHAMPARAN GOVT. ELECTRO & COMMUNICATION, ENGG. 60
GOVT ENGG COLLEGE W. CHAMPARAN GOVT. ELECTRONICS ENGG. (VLSI DESIGN & TECHNOLOGY ) 30
GOVT ENGG COLLEGE W. CHAMPARAN GOVT. COMPUTER Sc. & Engg. 30
GOVT ENGG COLLEGE W. CHAMPARAN GOVT. COMPUTER Sc. & Engg. (Cyber Security) 60
25 GOVT. ENGG. COLLEGE, W. CHAMPARAN Total 360
GOVT. ENGG. COLLEGE, AURANGABAD GOVT. CIVIL ENGG. 60
GOVT. ENGG. COLLEGE, AURANGABAD GOVT. MECHANICAL ENGG. 60
GOVT. ENGG. COLLEGE, AURANGABAD GOVT. ELECTRICAL ENGG. 60
GOVT. ENGG. COLLEGE, AURANGABAD GOVT. ELECTRO & COMMUNICATION, ENGG. 60
GOVT. ENGG. COLLEGE, AURANGABAD GOVT. COMPUTER Sc. & Engg.(Data Science) 60
GOVT. ENGG. COLLEGE, AURANGABAD GOVT. ARTIFICIAL INTELLIGENCE & MACHINE LEARNING 60
26 GOVT. ENGG. COLLEGE, AURANGABAD Total 360
GOVT. ENGG. COLLEGE, KAIMUR GOVT. CIVIL ENGG. 90
GOVT. ENGG. COLLEGE, KAIMUR GOVT. MECHANICAL ENGG. 60
GOVT. ENGG. COLLEGE, KAIMUR GOVT. ELECTRICAL ENGG. 60
GOVT. ENGG. COLLEGE, KAIMUR GOVT. ELECTRO & COMMUNICATION, ENGG. 60
GOVT. ENGG. COLLEGE, KAIMUR GOVT. COMPUTER Sc. & Engg. (Networks) 60
GOVT. ENGG. COLLEGE, KAIMUR GOVT. COMPUTER Sc. & Engg. (Cyber Security) 30
27 GOVT. ENGG. COLLEGE, KAIMUR Total 360
GOVT. ENGG. COLLEGE, GOPALGANJ GOVT. CIVIL ENGG. 60
GOVT. ENGG. COLLEGE, GOPALGANJ GOVT. MECHANICAL ENGG. 30
GOVT. ENGG. COLLEGE, GOPALGANJ GOVT. ELECTRICAL ENGG. 60
COMPUTER Sc. & Engg. (IOT & Cyber Security
GOVT. ENGG. COLLEGE, GOPALGANJ GOVT. including Block Chain Technology) 60
GOVT. ENGG. COLLEGE, GOPALGANJ GOVT. AERONAUTICAL ENGG. 30
GOVT. ENGG. COLLEGE, GOPALGANJ GOVT. ELECTRONICS ENGG. (VLSI DESIGN & TECHNOLOGY ) 60
GOVT. ENGG. COLLEGE, GOPALGANJ GOVT. COMPUTER Sc. & Engg. (AI) 60
28 GOVT. ENGG. COLLEGE, GOPALGANJ Total 360
GOVT. ENGG. COLLEGE, MADHUBANI GOVT. CIVIL ENGG. 120
GOVT. ENGG. COLLEGE, MADHUBANI GOVT. MECHANICAL ENGG. 60
GOVT. ENGG. COLLEGE, MADHUBANI GOVT. ELECTRICAL ENGG. 60
GOVT. ENGG. COLLEGE, MADHUBANI GOVT. COMPUTER Sc. & Engg. 60
GOVT. ENGG. COLLEGE, MADHUBANI GOVT. COMPUTER Sc. & Engg. (IOT) 60
29 GOVT. ENGG. COLLEGE, MADHUBANI 360
GOVT. ENGG. COLLEGE, SIWAN GOVT. CIVIL ENGG. 60
GOVT. ENGG. COLLEGE, SIWAN GOVT. MECHANICAL ENGG. 60
GOVT. ENGG. COLLEGE, SIWAN GOVT. ELECTRICAL ENGG. 60
 Page no.5/6

Institute
Sl.no. INSTITUTION BRANCH Total no. of Seats
Type

GOVT. ENGG. COLLEGE, SIWAN GOVT. COMPUTER Sc. & Engg. (IOT) 60
GOVT. ENGG. COLLEGE, SIWAN GOVT. COMPUTER Sc. & Engg. 60
GOVT. ENGG. COLLEGE, SIWAN GOVT. ELECTRONICS ENGG. (VLSI DESIGN & TECHNOLOGY ) 60
30 GOVT. ENGG. COLLEGE, SIWAN TOTAL 360
GOVT. ENGG. COLLEGE, JEHANABAD GOVT. CIVIL ENGG. 120
GOVT. ENGG. COLLEGE, JEHANABAD GOVT. MECHANICAL ENGG. 60
GOVT. ENGG. COLLEGE, JEHANABAD GOVT. ELECTRO & COMMUNICATION, ENGG. 60
GOVT. ENGG. COLLEGE, JEHANABAD GOVT. COMPUTER Sc. & Engg. (Cyber Security) 60
GOVT. ENGG. COLLEGE, JEHANABAD GOVT. ELECTRICAL ENGG. 60
31 GOVT. ENGG. COLLEGE, JEHANABAD TOTAL 360
GOVT. ENGG. COLLEGE, ARWAL GOVT. CIVIL ENGG. 60
GOVT. ENGG. COLLEGE, ARWAL GOVT. MECHANICAL ENGG. 30
GOVT. ENGG. COLLEGE, ARWAL GOVT. ELECTRICAL ENGG. 120
GOVT. ENGG. COLLEGE, ARWAL GOVT. COMPUTER Sc. & Engg.(Data Science) 60
GOVT. ENGG. COLLEGE, ARWAL GOVT. COMPUTER Sc. & Engg. 60
GOVT. ENGG. COLLEGE, ARWAL GOVT. ROBOTICS AND AUTOMATION 30
32 GOVT. ENGG. COLLEGE, ARWAL TOTAL 360
GOVT. ENGG. COLLEGE, KHAGARIA GOVT. CIVIL ENGG. 120
GOVT. ENGG. COLLEGE, KHAGARIA GOVT. MECHANICAL ENGG. 60
GOVT. ENGG. COLLEGE, KHAGARIA GOVT. ELECTRICAL ENGG. 60
GOVT. ENGG. COLLEGE, KHAGARIA GOVT. COMPUTER Sc. & Engg.(AI & ML) 60
GOVT. ENGG. COLLEGE, KHAGARIA GOVT. COMPUTER Sc. & Engg. (IOT) 60
33 GOVT. ENGG. COLLEGE, KHAGARIA Total 360
GOVT. ENGG. COLLEGE, BUXAR GOVT. CIVIL ENGG. 60
GOVT. ENGG. COLLEGE, BUXAR GOVT. MECHANICAL ENGG. 60
GOVT. ENGG. COLLEGE, BUXAR GOVT. ELECTRICAL ENGG. 60
GOVT. ENGG. COLLEGE, BUXAR GOVT. COMPUTER Sc. & Engg. 120
GOVT. ENGG. COLLEGE, BUXAR GOVT. ELECTRO & COMMUNICATION, ENGG. 60
34 GOVT. ENGG. COLLEGE, BUXAR Total 360
GOVT. ENGG. COLLEGE, BHOJPUR GOVT. CIVIL ENGG. 60
GOVT. ENGG. COLLEGE, BHOJPUR GOVT. MECHANICAL ENGG. 60
GOVT. ENGG. COLLEGE, BHOJPUR GOVT. ELECTRICAL ENGG. 60
GOVT. ENGG. COLLEGE, BHOJPUR GOVT. ELECTRO & COMMUNICATION, ENGG. 60
GOVT. ENGG. COLLEGE, BHOJPUR GOVT. COMPUTER Sc. & Engg. 90
GOVT. ENGG. COLLEGE, BHOJPUR GOVT. INSTRUMENTATION ENGG. 30
35 GOVT. ENGG. COLLEGE, BUXAR Total 360
GOVT. ENGG. COLLEGE, SHEIKHPURA GOVT. CIVIL ENGG. 60
GOVT. ENGG. COLLEGE, SHEIKHPURA GOVT. MECHANICAL ENGG. 30
GOVT. ENGG. COLLEGE, SHEIKHPURA GOVT. ELECTRICAL ENGG. 60
GOVT. ENGG. COLLEGE, SHEIKHPURA GOVT. ELECTRO & COMMUNICATION, ENGG. 60
GOVT. ENGG. COLLEGE, SHEIKHPURA GOVT. COMPUTER Sc. & Engg. 120
GOVT. ENGG. COLLEGE, SHEIKHPURA GOVT. MECHATRONICS ENGG. 30
36 GOVT. ENGG. COLLEGE, SHEIKHPURA Total 360
GOVT. ENGG. COLLEGE OF LAKHISARAI GOVT. CIVIL ENGG. 120
GOVT. ENGG. COLLEGE OF LAKHISARAI GOVT. MECHANICAL ENGG. 60
GOVT. ENGG. COLLEGE OF LAKHISARAI GOVT. ELECTRICAL ENGG. 60
GOVT. ENGG. COLLEGE OF LAKHISARAI GOVT. COMPUTER Sc. & Engg. (AI) 60
GOVT. ENGG. COLLEGE OF LAKHISARAI GOVT. COMPUTER Sc. & Engg.(Data Science) 60
37 GOVT. ENGG. COLLEGE OF LAKHISARAI Total 360
GOVT. ENGG. COLLEGE OF SAMASTIPUR GOVT. CIVIL ENGG. 60
GOVT. ENGG. COLLEGE OF SAMASTIPUR GOVT. MECHANICAL ENGG. 60
GOVT. ENGG. COLLEGE OF SAMASTIPUR GOVT. ELECTRICAL ENGG. 60
 Page no.6/6

Institute
Sl.no. INSTITUTION BRANCH Total no. of Seats
Type

GOVT. ENGG. COLLEGE OF SAMASTIPUR GOVT. COMPUTER Sc. & Engg. (Cyber Security) 60
GOVT. ENGG. COLLEGE OF SAMASTIPUR GOVT. ELECTRO & COMMUNICATION, ENGG. 60
GOVT. ENGG. COLLEGE OF SAMASTIPUR GOVT. COMPUTER Sc. & Engg.(AI & ML) 60
38 GOVT. ENGG. COLLEGE OF SAMASTIPUR Total 360
Total 13675

i. JEE(Main) Website: bceceboard.bihar.gov.in

ii.

iii.

iv.
v.
 Page no.1/1

24

1B

Institution Branch Total

Dr. APJ Abdul Kalam Women's Inst. Of Tech. COMPUTER Sc. & Engg. 60
INFORMATION TECHNOLOGY (IT) 30
Bio Informatics (BI) 30
TOTAL 120

i. JEE(Main)
Website: bceceboard.bihar.gov.in
ii.

iii.

iv.
v.
 Page no. 1/1

25

—1C

Statement of total available seats in different Colleges in Pharmacy for the session 2024

Distribution of Seats
DQ
INSTITUTION BRANCH UR F_UR EWS F_EWS SC F_SC ST F_ST EBC F_EBC BC F_BC RCG Total

G.P.I. GULZARBAGH, Patna-7B.Pharma 27 13 7 3 11 5 1 0 12 6 8 4 3 100 5

M.I.T.MUZAFFARPUR B.Pharma 27 13 7 3 11 5 1 0 12 6 8 4 3 100 5

Pharmacy Total 54 26 14 6 22 10 2 0 24 12 16 8 6 200 10

* (i) Any change in Institutions / number of seats will be made known at the time of Counselling / Interview.
(ii) Total Seats in each Institution are inclusive of Disable Quota Seats.
(iii) Total Seats are inclusive of SMQ Quota seats in MIT, Muzaffarpur.
 Page no. 1/1
26
—2
Schedule-A
Statement of total available seats in different Colleges in Medical stream* for the session 2024
Note : BCECE Board/ State Govt. reserves their right to add new Institutions and seats in this statement at any time for which
information will be provided at the time of counselling.
Distribution of Seats DQ
INSTITUTION BRANCH UR F_UR EWS F_EWS SC F_SC ST F_ST EBC F_EBC BC F_BC RCG Total
B.C.P.O. PATNA B.Ph.T. 5 3 1 1 2 1 0 0 3 1 1 1 1 20 1
B.C.P.O. PATNA B.Th.O. 5 3 1 1 2 1 0 0 3 1 1 1 1 20 1
Physio & Occupational, Total 10 6 2 2 4 2 0 0 6 2 2 2 2 40 2

Schedule-B
INSTITUTION BRANCH Distribution of Seats
UR F_UR EWS F_EWS SC F_SC ST F_ST EBC F_EBC BC F_BC RCG Total DQ
P.H.I., PATNA B.M. LAB TECH 5 3 1 1 2 1 1 0 2 1 2 1 0 20 1
P.H.I., PATNA B. O.T. TECH. 5 3 2 0 2 1 0 0 3 1 1 1 1 20 1
P.H.I., PATNA B.R.I.TECH. 6 2 1 1 2 1 0 0 2 2 2 0 1 20 1
P.H.I., PATNA B.OPTOMETRY 5 3 1 1 3 1 0 0 2 1 2 1 0 20 1
Total 21 11 5 3 9 4 1 0 9 5 7 3 2 80 4

Schedule-C
Distribution of Seats DQ
INSTITUTION BRANCH UR F_UR EWS F_EWS SC F_SC ST F_ST EBC F_EBC BC F_BC RCG Total
B.Sc. Nursing College, N.M.C.H, B.Sc. Nursing 16 8 4 2 7 3 0 0 7 3 5 3 2 60 3
Patna
B.Sc. Nursing College, BMIMS, B.Sc. Nursing 16 8 4 2 6 3 1 0 7 4 5 2 2 60 3
Pawapuri Nalanda
B.Sc. Nursing College JLNMCH., B.Sc. Nursing 16 8 4 2 7 3 1 0 7 4 5 2 1 60 3
Bhagalpur
B.Sc. Nursing College DMCH., B.Sc. Nursing 16 8 4 2 6 3 0 1 8 3 5 2 2 60 3
Darbhanga
B.Sc. Nursing College B.Sc. Nursing 16 8 4 2 7 3 0 0 7 4 5 2 2 60 3
ANMMCH.,Gaya
B.Sc. Nursing College, GMCH, B.Sc. Nursing 16 8 4 2 6 3 1 0 7 4 5 2 2 60 3
Purnea
B.Sc. Nursing College, B.Sc. Nursing 16 8 4 2 7 3 1 0 7 4 5 2 1 60 3
GMCH, Bettiah
B.Sc. Nursing College B.Sc. Nursing 16 8 4 2 6 3 0 1 8 3 5 2 2 60 3
GMCH, Saran (Chapra)
B.Sc. Nursing College B.Sc. Nursing 16 8 4 2 7 3 0 0 7 4 5 2 2 60 3
SKMCH, Muzaffarpur
B.Sc. Total 144 72 36 18 59 27 4 2 65 33 45 19 16 540 27

* (i) Any change in Institutions / Number of seats will be made known at the time of Counselling / Interview.
(ii) Total Seats in each Institution are inclusive of Disable Quota Seats.
 Page no. 1/2

27
Schedule-D

Statement of Seats Distribution for PCB Group Colleges for Session 2024-2025 (Private. B.Sc. Nursing
Institutions)

INSTITUTION Name BRANCH Total

Sl. No.
1 National Institute of Health Education and Research, I.D.H. Colony, Gulzarbagh, Patna B.Sc. Nursing 60
2 College of Nursing, Kurji Holy Family Hospital, Sadakat Ashram, Patna B.Sc. Nursing 60
3 Shyamlal Chandrashekhar Nursing College, NH-31 Parmanandpur, Khagaria B.Sc. Nursing 80
4 Himalaya Institute of Higher Education, Khemnichak, New by pass road Patna B.Sc. Nursing 100
5 Patna institute of Nursing and paramedical Science, Brahmpur, New Jaganpura, Patna B.Sc. Nursing 100
6 Himalaya College of Nursing Chksi, Paliganj, Patna B.Sc. Nursing 100
7 Patliputra College of Nursing Khemnichak, Subhas Nagar, Patna B.Sc. Nursing 100
8 Dhanarua School of Nursing and paramedical Awdhara, Pabheri, Dhanarua, Patna B.Sc. Nursing 100
9 Yamuna Institute of Nursing, B.S. Hospital Campus, Vishnupur, Begusarai B.Sc. Nursing 60
10 Krishna Institute of Nursing and Paramedical Sciences, Sindhiya Khurd, Samastipur B.Sc. Nursing 100
11 Prameela Adhar Nursing School (B.Sc. Nursing College) Satanpur, Samastipur B.Sc. Nursing 100
12 S.N.S. Institute of Nursing Science, Motihari, East Champaran B.Sc. Nursing 100
13 Aahe Professional Institute, Jamsaut, R.K. Puram Road, Mathiyapur, Danapur, Patna B.Sc. Nursing 100
14 Ambedkar Institute of Higher Education, Chitnawan, Danapur, patna B.Sc. Nursing 100
15 Ambedkar Institute of Educational, Dalmiyanagar, Dehri, Rohtas B.Sc. Nursing 80
16 Shershah Medical Reaserch and Training Sansthan College of Nursing, Takiya Sasaram, B.Sc. Nursing 100
Rohtas
17 Maa Kanti College of Nursing, Mohammadpur, Fatuha, Patna B.Sc. Nursing 100
18 Shivam College of Higher Studies (Nursing) Phulwariya, Baikathpur, Patna B.Sc. Nursing 100
19 Raj Aaryan Nursing and Paramedical College, Mohadipur, Ramghat, Nalanda B.Sc. Nursing 100
20 Ashoka Nursing and Paramedical College, Lachubigha, Nagarnausa, Nalanda B.Sc. Nursing 100
21 R.R.P. School of Nursing, Khairee Babhngawan, Sasaram, Rohtas B.Sc. Nursing 100
22 Mona School of Nursing and Paramedical College, Trilok Nagar, Agamkuan, Patna B.Sc. Nursing 100
23 Verma College of Nursing and Paramedical Science, Anaith Ara, Bhojpur B.Sc. Nursing 100
24 Gautam Institute of Nursing, Saiyad Bahree, Chandi, Hilsa Road, Chandi, Nalanda B.Sc. Nursing 100
25 D.P. Singh Institute of Education, Gautam Nagar, Shahpur, Rahue, Nalanda B.Sc. Nursing 100
26 Magadh Paramedical and Nursing Institute, Hardaspur Mokari, Magadh University, Gaya B.Sc. Nursing 100
27 Taluka Institute of Nursing Shaurath Niyar Sabhagachi Wd no. 11, Madhubani B.Sc. Nursing 100
28 Nutan College of Nursing, Dhanhara, Post Manik Chouk, Runni Saidpur, Samastipur B.Sc. Nursing 100
29 Shubhvanti Institute of Education, Pachoura, Siwan B.Sc. Nursing 100
30 Vivekanand Paramedical and Nursing College, Hardaspur Mokri, Magadh University, Gaya B.Sc. Nursing 100

31 Baba Rajaram College of Education, K.D. Nagar, Matasi Halsi, Lakhisarai B.Sc. Nursing 100
32 M.K. Global School of Health Science, N.H.-28 Harishankar Maniyari, Muzaffarpur B.Sc. Nursing 100
33 Priyadarshini Nursing Institute, Gyankhand, Vill-Ladha, Kevati, Darbhanga B.Sc. Nursing 100
34 MGM College of Nursing and Paramedical School, Azad Nagar, Patna B.Sc. Nursing 100
35 Gautam Institute of Nursing and Paramedical, Bhagnbigha, Biharsharif, Nalanda B.Sc. Nursing 100
36 Mata Sushila Institute of Education Sayad Bahri, Hilsa, Nalanda B.Sc. Nursing 100
37 Katihar B.Sc. Nursing College, Near K.M.C.H. Bheriya Rahika, Wd no. 04 Daln, Katihar B.Sc. Nursing 100
38 Shri Bhagwat Prasad Singh Memorial College of Nursing, Dev More, G.T. Road, Aurangabad B.Sc. Nursing 100

39 Chanakya College of Education, Vill Raksiya, Lala Bhadsara, Dulhin Bazar, Patna B.Sc. Nursing 100
40 Doon Educational Foundation Society, Kajal Kunj, Near R.M.S. Office, Pankha Toli, B.Sc. Nursing 60
Muzaffarpur
41 Aaryaman College Higher Studies, Bhagwanpur Vaishali B.Sc. Nursing 100
42 AHS Nursing College, Jail Chouck Tajpur road Samastipur B.Sc. Nursing 60
43 B.P. Memorial School of Nursing and Paramedical Sciences, Nautan, West champaran B.Sc. Nursing 60
44 Bhavyashree Institute of Nursing Bhagwat Nagar, Patna B.Sc. Nursing 60
45 Trisha Nursing Shool, Punpun Patna B.Sc. Nursing 60
46 Arjun College of Nursing, Naugachiya, Bhagalpur B.Sc. Nursing 60
47 RBSRDR College Raghopur, Vaishali B.Sc. Nursing 60
48 SKM College of Nursing and Paramedical, Shambhuganj, Banka B.Sc. Nursing 60
49 Panasiya Medical Educational Institutions, Warisnagar, Samastipur B.Sc. Nursing 60
50 St. Merry Nursing School, Sheikhpura, Aurangabad B.Sc. Nursing 60
 Page no. 2/2

51 DPS School of Nursing, Chand Chaura, Gaya B.Sc. Nursing 60

52 Sri Raj Nursing Training School, Mithapur Bus Stand Road, Patna B.Sc. Nursing 60
53 Mahavir Nursing School and College, Kanti , Muzaffarpur B.Sc. Nursing 60
54 Yogendra Institute of Nursing training, Anaith, Nawada, Bhojpur B.Sc. Nursing 60
55 M.R. Insitute of Higher Education, Dhanarua, Patna B.Sc. Nursing 60
56 Lord Budha Koshi, Nursing School, Baijnathpur, Saharsa B.Sc. Nursing 60
57 Vaidehi Institute of Nursing and Higher Education, Pupri, Sitamarhi B.Sc. Nursing 60
58 Shivam Higher Education Foundation, Shanti Nagar, Wd. No. 3, Madhubani, Purnea B.Sc. Nursing 60
59 Krishna Institute of Higher Education, Murliganj, Madhepura B.Sc. Nursing 60
60 Dasrath Prasad Singh Institute of Health Education, Prahladpur, Muzaffarpur B.Sc. Nursing 60
61 Bhagalpur Institute of Nursing, Amarpur Road, Bhagalpur B.Sc. Nursing 60
62 Shahid Pramod Nursing School, Madhopur Susta, Muzaffarpur B.Sc. Nursing 60
63 Leader Institute of Higher Education, Po- Harpur Aloth, Samastipur B.Sc. Nursing 60
64 Patel Nursing College, K. Nagar, Purnea B.Sc. Nursing 60
65 Mata Tara Institute of Technical Education, Beldari Chak, Patna B.Sc. Nursing 60
66 Shyam School of Nursing, Karauna, Jehanabad B.Sc. Nursing 60
67 Alai Fatima Hai College of Nursing, Rajabazar,(Paras Hospital Campus) Patna B.Sc. Nursing 60
68 Tarun Pranay Institute of Nursing, Bhagwatipur, Madhubani B.Sc. Nursing 60
69 B.L.D. Institute of Nursing, Rahika, Madhubani B.Sc. Nursing 60
70 Maa Tara Chandi Institute, Sasaram, Rohtas B.Sc. Nursing 60
71 Maa Savitri Institute of Nursing and Paramedical Sciences, Sabour, Bhagalpur B.Sc. Nursing 60
72 Chanchal Suman Nursing College, Mahua, Vaishali B.Sc. Nursing 60
73 Kingway Technical Institute, Durgawati, Kaimur B.Sc. Nursing 60
74 Vishundev Narayan Institute of Higher Education, Rajgir, Nalanda B.Sc. Nursing 60
75 Saran Institute of Medical Sciences Nursing College, Maker, Saran B.Sc. Nursing 60
76 Raj Nursing Institute, Bhabhua, Kaimur B.Sc. Nursing 60
77 Savitri Nursing and Paramedical Training Institute, Mohammadpur, Gopalganj B.Sc. Nursing 60
78 Best Nursing Institute, Near Baba Dharamkata, Buxar B.Sc. Nursing 60
79 Ramsharan Rai College, Jandaha, Vaishali B.Sc. Nursing 60
80 ST. College of Health Education, Phulwarisharif, Patna B.Sc. Nursing 60
81 Mamta Institute of Education, Daraunda, Siwan B.Sc. Nursing 60
82 Guro Binda College, Chatar, Nawada B.Sc. Nursing 60
Total 6360

* (i) Any change in Institutions / Number of seats will be made known at the time of Counselling / Interview.
(ii) Total Seats in each Institution are inclusive of Disable Quota Seats.
 29

Note:- BCECE Board / State Govt. reserves their right to add / substract Institutions and seats in this statement at any time for which
information will be provided at the time of counselling.

Distribution of Seats Distribution of Seats

INSTITUTION BRANCH 50 % joint merit seats (PCMB) 50% CBA/PCA/MBA/MCA Seats

UR SC ST EBC BC EWS Total UR SC ST EBC BC EWS Total

B.A.C. SABOUR Agri Sc. 11 8 1 11 7 5 43 10 9 1 10 8 4 42

M.B.A.C. SAHARSA Agri Sc. 11 8 1 11 7 5 43 10 9 1 10 8 4 42
V. K. S., College of Agri. Dumrao, Agri Sc. 11 8 1 11 7 5 43 10 9 1 10 8 4 42
Buxar
B.P.S. Agri.College, Purnea Agri Sc. 11 8 1 11 7 5 43 10 9 1 10 8 4 42
D.K.A.C., ARRABARI, Agri Sc. 11 8 1 11 7 5 43 10 9 1 10 8 4 42
KISHANGANJ
Agriculture Sc. Total 55 40 5 55 35 25 215 50 45 5 50 40 20 210
N.C.O.H. NOORSARAI,NALANDA B.SC 5 4 0 6 4 2 21 5 4 1 5 4 2 21
(Horticulture)
Horticulture Total 5 4 0 6 4 2 21 5 4 1 5 4 2 21
COLLEGE OF FORESTRY AND Forestry & 6 5 0 7 5 2 25 6 5 1 6 4 3 25
ENVIRONMENTAL SCIENCES, Environmental
MUNGER sciences.
Forestry & Environmental Science Total 6 5 0 7 5 2 25 6 5 1 6 4 3 25

Distribution of Seats Distribution of Seats

PCB Seats 50% CBA/PCA Seats
INSTITUTION BRANCH UR SC ST EBC BC EWS Total UR SC ST EBC BC EWS Total
College of Agriculture Bio Bio-Tech 8 6 0 7 6 3 30 7 6 1 8 5 3 30
Technology, Sabour, Bhagalpur
Bio-Tech 8 6 0 7 6 3 30 7 6 1 8 5 3 30

Distribution of Seats Distribution of Seats

PCM Seats 50% MBA/MCA Seats
INSTITUTION BRANCH UR SC ST EBC BC EWS Total UR SC ST EBC BC EWS Total
College of Agricultural Agri Engg. 8 6 0 7 6 3 30 7 6 1 8 5 3 30
Engineering, Ara, Bhojpur
Agri Engg. Total 8 6 0 7 6 3 30 7 6 1 8 5 3 30

Note: (i) Any change in Institutions / number of seats will be made known at the time of Counselling / Interview.
(ii) Total Seats in each Institution are inclusive of Disable Quota Seats.
 30

Sl. Lukrd dqy lhV **ICAR dksVk ds 100 % (85% lhV jkT; dksVk $ 15 % lhV ICAR dksVk½ 40 lhVksa dk cWVokjk
ikB~;Øe @ rgr 15% NRI 40 lhVksa dk cWVokjk vkj{k.k jksLVjksa ds vUnj
egkfo|ky;
Quota vukjf{kr vuq- vuq- vR;Ur fiNM+k vkfFkZd :Ik
5% tkfr tutkfr fiNM+k oxZ oxZ ls detksj
oxZ
11 8 1 9 7 4
ekfRL;dh
1 egkfo|ky;] 50 & 2 Paid (Self-financed) dksVk ds 10 % vFkkZr 08 lhVksa dk c¡Vokjk vkj{k.k
fd'kuxat jksLVjksa ds vUnj
3 1 & 2 1 1

Sl. Lukrd dqy lhV **ICAR dksVk ds ¼85 % lhV jkT; dksVk $ 15 % lhV ICAR dksVk½ 34 lhVksa dk cWVokjk
ikB~;Øe @ rgr 15% NRI 34 lhVksa dk cWVokjk vkj{k.k jksLVjksa ds vUnj
egkfo|ky;
Quota
vukjf{kr vuq- vuq- vR;Ur fiNM+k vkfFkZd :Ik
5%
tkfr tutkfr fiNM+k oxZ oxZ ls detksj
oxZ
9 7 1 8 6 3
# lat; xk¡/kh
Paid (Self-financed) dksVk ds 10 % vFkkZr 04 lhVksa dk c¡Vokjk vkj{k.k
1 xO; izkS|ksfxdh 40 & 2
jksLVjksa ds vUnj
laLFkku] iVuk
2 1 & 1 & &
* fnO;kax mEehnokj ds (5%) {kSfrt vkj{k.k ds 02 lhVsa fnO;kax mEehnokj ftl oxZ ls lacaf/kr gksaxs mudh fxurh mlh oxZ fo'ks"k (UR / R) esa dh
tk;sxhA ;ksX; fnO;kax mEehnokj dh vuqiyC/krk fLFkfr esa Physically Fit mEehnokj ls Hkjk tk ldsxkA
uksV% (i) The available seats as mentioned above are provisional. Any Change in number of seats
will be made known at the time of Counselling / Interview.
(ii) Total Seats in each institution are inclusive of Disable Quota Seats.
# JEE(Main)
Website: bceceboard.bihar.gov.in
 31

1
2024

PHYSICS
Physical world and measurement
Physics : scope and excitement, nature of physical laws; Physics, technology and society.
Need for measurement : Units of measurement, systems of units. S.I. units, fundamental and derived units, length,
mass and time measurements, accuracy and precision of measuring instruments, errors in measurement, significant
figures, regular and irregular errors.
Dimensions of physical quantities, dimensional analysis and its applications.
Kinematics
Frame of reference, Motion in straight line, position time graph, speed and velocity. Uniform and non-uniform
motion, average speed and instantaneous velocity.
Uniformly accelerated motion, velocity time and position time graphs, relations for uniformly accelerated motion
(graphical treatment).
Elementary concepts of differentiation and integration for describing motion.
Scalar and vector quantities : Position and displacement vectors, general vectors and notation, equality of vectors,
multiplication of vectors by a real number, addition and subtraction of vectors, relative velocity.
Unit vector, Resolution of a vector in a plane-rectangular components.
Motion in a plane, Cases of uniform velocity and uniform acceleration - projectile motion, uniform circular motion.
Laws of Motion
Intutive concept of force, Inertia, Newton's first law of motion, momentum and Newton's Second law of motion,
impulse, Newton's third law of motion, Law of conservation of linear momentum and its applications.
Equilibrium of concurrent forces, static and kinetic friction, laws of friction, rolling friction, lubrication, dynamics of
uniform circular motion : centripetal force examples of circular motion (vehical on level circular road, vehical on
banked road).
Work, Energy and Power
Scalar product of Vector work done by a constant force and a variable force, kinetic energy, work-energy theorem,
power.
Notion of potential energy, potential energy of a spring, conservative forces; conservation of mechanical energy
(Kinetic and potential energies), non conservative forces, elastic and inelastic collissions in one and two dimension.
Motion of System of Particles and Rigid body.
Centre of mass of two-particle system, momentum, conservation and centre of mass motion, centre of mass of a
rigid body, centre of mass of circular ring, disc, rod and sphere.
Vector product of vectors; momentum of a force, torque angular momentum, conservation of angular momentum
with some examples.
Equilibrium of rigid bodies, rigid body rotation and equations of rotational motion, comparison of linear and rotational
motion, moment of inertia, radius of gyration. Values of M.I. for simple gemoetrical objects (no derivation), statement
of parallel and perpendicular axes theorems and their applications.
Gravitation
Keplar's laws of planetary motion, The universal law of gravitation, Acceleration due to gravity and its variation with
altitude and depth.
Gravitational potential energy, gravitational potential, escape velocity, orbital velocity of satellite, Geo-stationary
satellites.
Properties of Bulk Matter
Elastic behaviour, stress-strain relationship, Hooke's law, Young's modulus, Bulk modulus, Deformation, Shear
modulus of rigidity.
Pressure due to fluid column, pascal's law and its applications / hydraulic lift and hydraulic brakes).
Effect of gravity on fluid pressure.
Viscocity, stoke's law terminal velocity, Reynold's number, Streamline and turbulent flow, Bernoulli's theorem and
its applications.
 32

Surface energy and surface tension, angle of contact, application of surface tension, ideas to drop bubbles and
capillary rise.
Heat and Thermodynamics
Heat, temperature, thermal expansion, specific heat capacity, Calorimetry, change of state, latent heat.
Heat transfer - conduction, convection and radiation, thermal conductivity, Newton's law of cooling.
Thermal equilibrium and definition of temperature (Zeroth law of thermodynamics). Heat, work and internal energy.
First law of thermodynamics.
Second law of thermodynamics, Reversible and irreversible processes. Heat engines and refrigerator.
Behaviour of Perfect Gas and Kinetic Theory
Equation of state of a perfect gas, work done on compressing a gas.
Kinetic theory of gases : Assumptions, concept of pressure, Kinetic energy and temperature, rms speed of gas
molecules, degrees of freedom, law of equipartition of energy (statement only) and application to specific heat
capacities of gases, concept of mean free path, Avogadro's number.
Oscillations and Waves.
Periodic motion - period, frequency, displacement as a function of time, periodic functions, simple harmonic motion
(SHM) and its equation, phase, oscillation of a spring - restoring force and force constant energy in SHM - Kinetic
and potential energies, simple pendulum - derivation of expression for its time period) free, forced and damped
oscillations (qualitative ideas only), resonance.
Wave motion, Longitudinal and transverse waves, speed of wave motion, Displacement relation for progressive
waves, principle of superposition of waves, reflection of waves, standing waves in strings and organ pipes,
fundamental mode and harmonics, Beats, Doppler effect.
* Electrostatics
Electric Charge; Conservation of charge, Coulomb's law-force between two point charges, forces between multiple
charges; superposition principle and continuous charge distribution.
Electric field; electric field due to a point charge, electric field lines; electric dipole, electric field due to a dipole;
torque on a dipole in uniform electric field.
Electric flux, statement of Gauss's theorem and its applications to find field due to infinitely long straight wire,
uniformly charged infinite plane sheet and uniformly charged thin spherical shell (field inside and outside).
Electric potential, potential difference, electric potential due to a point charge, a dipole and system of charges;
equipotential surfaces, electrical potential energy of a system of two point charges and of electric dipole in an
electrostatic field.
Conductors and insulators, free charges and bound charges inside a conductor. Dielectrics and electric polarisation,
capacitors and capacitance, combination of capacitors in series and in parallel, capacitance of a parallel plate
capacitor with and without dielectric medium between the plates, energy stored in a capacitor. Van de Graaff
generator.
Current Electricity
Electric current, flow of electric charges in a metallic conductor, drift velocity, mobility and their relation with electric
current; Ohm's law, electrical resistance, V-I characteristics (linear and non-linear), electrical energy and power,
electrical resistivity and conductivity. Carbon resistors, colour code for carbon resistors; series and parallel
combinations of resistors; temperature dependence of resistance.
Internal resistance of a cell, potential difference and emf of a cell, combination of cells in series and in parallel.
Kirchhoff's laws and simple applications. Wheatstone bridge, metre bridge.
Potentiometer - principle and its applications to measure potential difference and for comparing emf of two cells;
measurement of internal resistance of a cell.
Magnetic effects of current & Magnetism
Concept of magnetic field, Oersted's experiment.
Biot - Savart law and its application to current carrying circular loop.
Ampere's law and its applications to infinitely long straight wire, straight and toroidal solenoids.
Force on a moving charge in uniform magnetic and electric fields. Cyclotron.
Force on a current-carrying conductor in a uniform magnetic field. Force between two parallel current-carrying
conductors-definition of ampere. Torque experienced by a current loop in uniform magnetic field, moving coil
galvanometer-its current sensitivity and conversion to ammeter and voltmeter.
Current loop as a magnetic dipole and its magnetic dipole moment. Magnetic dipole moment of a revolving electron.
Magnetic field intensity due to a magnetic dipole (bar magnet) along its axis and perpendicular to its axis. Torque on
 33

a magnetic dipole (bar magnet) in an uniform magnetic field; bar magnet as an equivalent solenoid, magnetic field
lines; Earth's magnetic field and magnetic elements. Para-, dia- and ferro- magnetic substances, with examples.
Electromagnets and factors affecting their strengths. Permanent magnets.
Electromagnetic Induction and Alternating currents
Electromagnetic induction; Faraday's law, induced emf and current; Lenz's Law, Eddy currents. Self and mutual
inductance.
Need for displacement current.
Alternating currents, peak and rms value of alternating current/ voltage; reactance and impedance; LC oscillations
(qualitative treatment only), LCR series circuit, resonance; power in AC circuits, wattless current.
AC generator and transformer.
Electromagnetic Waves
Electromagnetic waves and their characteristics (qualitative ideas only). Transverse nature of electromagnetic
waves.
Electromagnetic spectrum (radio waves, microwaves, infrared, visible, ultraviolet, X-rays gamma rays) including
elementary facts about their uses.
Optics
Reflection of light, spherical mirrors, mirror formula, Refraction of light, total internal reflection and its applications,
optical fibres, refraction at spherical surfaces, lenses, thin lens formula, lens-maker's formula. Magnification, power
of a lens, combination of thin lenses in contact, Refraction and dispersion of light through a prism.
Scattering of light-blue colour of the sky and reddish appearance of the sun at sunrise and sunset.
Optical instruments; Human eye, image formation and accommodation, correction of eye defects (myopia,
hypermetropia, presbyopia and astigmatism) using lenses. Microscopes and astronomical telescopes (reflecting
and refracting) and their magnifying powers.
Wave optics: wave front and Huygens' principle, reflection and refraction of plane wave at a plane surface using
wave fronts. Proof of laws of reflection and refraction using Huygens' principle. Interference, Young's double slit
experiment and expression for fringe width, coherent sources and sustained interference of light. Diffraction due to
a single slit, width of central maximum. Resolving power of microscopes and astronomical telescopes. Polarisation,
plane polarised light; Brewster's law, uses of plane polarised light and Polaroids.
Dual Nature of Matter and Radiation
Photoelectric effect, Hertz and Lenard's observations; Einstein's photoelectric equation-particle nature of light.
Matter waves-wave nature of particles, de Broglie relation. Davission-Germer experiment.
Atoms and Nuclei
Alpha-particle scattering experiment; Rutherford's model of atom; Bohr model, energy levels, hydrogen spectrum.
Composition and size of nucleus, atomic masses, isotopes, isobars; isotones, Radioactivity-alpha, beta and gamma
particles/rays and their properties; radioactive decay law. Mass-energy relation, mass defect; binding energy per
nucleon and its variation with mass number; nuclear fission and fusion.
Electronic Devices
Semiconductors; semiconductor diode - I-V characterstics in forward and reverse bias, diode as a rectifier; I-V
characteristics of LED, photodiode, solar cell, and Zener diode; Zener diode as a voltage regulator. Junction
transistor, transistor action, characterstics of a transistor; transistor as an amplifier (common emitter configuration)
and oscillator. Logic gates (OR, AND, NOT, NAND and NOR). Transistor as a switch.
Communication Systems
Elements of a communication system (block diagram onbly); bandwidth of signals (speech, TV and digital data);
bandwidth of transmission medium. Propagation of electromagnetic waves in the atmosphere, sky and space wave
propagation. Need for modulation. Production and detection of an amplitude-modulated wave.
---------
 34

CHEMISTRY

Some basic concepts of Chemistry :

General Introduction : Importance and scope of chemistry. Historical approach to particulate nature of matter, laws
of chemical combination, Dalton's atomic theory; concept of elements, atoms and molecules, Atomic and molecular
masses. Mole concept and molar mass; percentage composition, empirical and molecular formula; chemical
reactions, stoichiometry and calculations based on stoichiometry.
Structure of Atom :
Discovery of electron, proton and neutron and their characteristics; atomic number, Isotopes & Isobars, Thomson's
model and its limitation, Rutherford's model and its limitations, Bohr's model and its limitations, concept of shells
and subshells, dual nature of matter and light, De Broglic's relationship, Heisenberg uncertainty principle, concept
of orbitals, Quantum numbers, shapes of S.P. and D orbitals, rules, for filling electrons in orbitals Aufbau principle,
Pauli exclusion principle and Hund's rule, electronic configuration of atoms, stability of half filled and completely
filled orbitals.
Classification of Elements and Periodicity in Properties:
Significance of classification, brief history of the development of periodic table, modern periodic law and the present
form of periodic table, periodic trends in properties of elements - atomic radii, ionic radii, ionization enthalpy,
electron gain enthalpy, electro negativity, valence.
Chemical Bonding and Molecular Structure :
Valence electrons, ionic bond, covalent bond, bond parameters, Lewis structure, polar character of covalent bond,
Covalent characters of Ionic bond, valence bond theory, resonance, geometry of covalent molecules, VSEPR
theory, concept of hybridization involving s, p and d orbitals and shapes of some simple molecules, molecular
orbital, theory of homonuclear diatomic molecules (qualitative idea only). Hydrogen bonding.
States of Matter : gases and liquids :
Three states of matter, Intermolecular interactions, type of bonding, melting and boiling points. Role of gas laws in
elucidating the concept of the molecule, Boyle's law, Charle's law, Gay Lussac's law Avogadro's law, Ideal behaviour,
empirical derivation of gas equation. Avogadro's number. Ideal gas equation. Derivation from ideal behaviour,
liquification of gases, critical temperature.
Liquid State - Vapour pressure, viscosity and surface tension (qualitative idea only, no mathematical derivations).
Thermodynamics :
Concepts of system, types of systems, surroundings, work, heat, energy, extensive and intensive properties, state
functions, First law of thermodynamics - internal energy and enthalpy, heat capacity and specific heat, measurement
of ?U and ?H, Hess's law of constant heat summation enthalpy of : bond dissociation, combustion, formation,
atomization, Sublimation, phase transformation, ionization and solution.
Introduction of entropy as a state function, free energy change for spontaneous and non-sponteneous process,
criteria for equilibrium.
Equilibrium :
Equilibrium in physical and chemical processes dynamic nature of equilibrium, law of mass action, equilibrium
constant, factors affecting equilibrium - Le Chatelier's principle; ionic equilibrium - ionization of acids and bases,
strong and weak electrolytes, degree of ionization, concept of pH. Hydrolysis of salts (elementary idea), buffer
solutions, solubility product, common ion effect (with illustrative examples).
Redox Reactions :
Concept of oxidation and reduction, redox reactions, oxidation number, balancing redox reactions, applications of
redox reactions.
Hydrogen :
Position of hydrogen in periodic table, occurrence, isotopes, preparation, properties and uses of hydrogen; hydrides
- ionic, covalent and interstitial; physical and chemical properties of water, heavy water; hydrogen peroxide -
preparation, reactions and structure; hydrogen as a fuel.
s-Block Elements (Alkali and Alkaline earth metals):
Group 1 and Group 2 elements :
General introduction, electronic configuration, occurrence, anomalous properties of the first element of each group,
diagonal relationship, trends in the variation of properties (such as ionization enthalpy, atomic and ionic radii)
trends in chemical reactivity with oxygen, water, hydrogen and halogens; uses.
Preparation and properties of some important compounds :
Sodium carbonate, sodium chloride, sodium hydroxide and sodium hydrogen carbonate, biological importance of
 35

sodium and potassium.

CaO, CaCO3 and industrial use, lime and limestone. Biological importance of Mg and Ca.
Some p-Block Elements
General Introduction p-Block Elements
Group 3 elements : General introduction, electronic configuration, occurrence, Variation of properties, oxidation
states, trends in chemical reactivity, anomalous properties of first element of the group; Boron-physical and chemical
properties, some important compounds : borax, boric acids, boron hydrides. Aluminium : uses, reactions with acids
and alkalies.
Group 4 elements : General introduction, electronic configuration, occurrence, variation of properties, oxidation
states, trends in chemical reactivity, anomalous behaviour of first element, Carbon - catenation, allotropic forms,
physical and chemical properties; uses of some important compounds : oxides. Important compounds of Silicon
and a few uses: Silicon tetrachloride, silicons, silicates and zeolite. (Part-I)
Organic Chemistry - Some Basic Principles and Techniques :
General introduction, methods of qualitative and quantitative analysis, classification and IUPAC nomenclature of
organic compounds.
Electronic displacements in a covalent bond; inductive effect, electromeric effect, resonance and hyper conjugation.
Hemolytic and heterolytic fission of a covalent bond: free radicals, carbocations, carboanions; electrophiles and
nucleophiles, types of organic reactions.
Hydrocarbons :
Classification of hydrocarbons :
Alkanes - Nomenclature, isomerism, conformations (ethane only), methods of preparation, physical properties,
chemical reactions including halogenation, free radical mechanism, combustion and pyrolysis.
Alkenes - Nomenclature, structure of double bond (ethane), geometrical isomerism, methods of preparation, physical
properties, chemical reaction : addition of hydrogen, halogen, water, hydrogen halides (Markovnikov's addition and
peroxide effect), ozonolysis, oxidation, mechanism of electrophyllic addition.
Alkynes - Nomenclature, structure of triple bond (ethyne), methods of preparation, physical properties, chemical
reactions; acidic character of alkynes, addition reactions of hydrogen, halogenes, hydrogen halides and water.
Aromatic hydrocarbons - Introduction, IUPAC nomenclature, Benzene : resonance, aromaticity : methods of
preparation, chemical properties.
Mechanism of electrophilec substitution - nitration, sulphonation, halogenation, Friedal Craft's alkylation and
acylation; directive influence of functional group in mono-substituted benzene; carcinogenicity and toxicity.
Environmental Chemistry :
Environmental pollution - Air, water and soil pollution, chemical reactions in atmosphere smogs, major atmospheric
pollutants : acid rain, ozone and its reactions, effects of depletion of ozone layer, greenhouse effect and global
warming - pollution due to industrial wastes, green chemistry as an alternative tool for reducing pollution, strategy
for control of environmental pollution.
* Solid State
Classification of solids based on different binding forces : molecular, ionic covalent and metallic solids, amorphous
and crystalline solids (elementary idea), unit cell in two dimensional and three dimensional lattices, calculation of
density of unit cell, packing in solids, voids, number of atoms per unit cell in a cubic unit cell, point defects, electrical
and magnetic properties.
Solutions
Types of solutions, expression of concentration of solutions of solids in liquids, solubility of gases in liquids, solid
solutions, colligative properties--relative lowering of vapour pressure, elevation of Boiling Point, depression of
freezing point, osmotic pressure, determination of molecular masses using colligative properties, abnormal molecular
mass.
Electrochemistry
Redox reactions, conductance in electrolytic solutions, specific and molar conductivity variations of conductivity
with concentration, Kohlrausch's law, electrolysis and laws of electrolysis (elementary idea), dry cell-electrolytic
cells and Galvanic cells; lead accumulator, EMF of a cell, standard electrode potential, Nernst equation and its
application to chemical cells, fuel cells; corrosion.
Chemical Kinetics
Rate of a reaction (average and instantaneous), factors affecting rates of reaction; concentration, temperature,
calatyst; order and molecularity of a reaction; rate law and specific rate constant, integrated rate equations and half
life (only for zero and first order reactions); concept of collision theory (elementary idea, no mathematical treatment)
 36

Surface Chemistry
Adsorption - physisorption and chemisorption; factors affecting adsorption of gases on solids; catalysis: homogenous
and heterogeneous, activity and selectivity: enzyme catalysis; colloidal state: distinction between true solutions,
colloids and suspensions; lyophilic, lyophobic, multimolecular and macromolecular colloids: properties of colloids;
Tyndall effect, Brownian movement, electrophoresis, coagulation; emulsion - types of emulsions.
General Principles and Processes of Isolation of Elements
Principles and methods of extraction - concentration, oxidation, reduction electrolytic method and refining; occurrence
and principles of extraction of aluminium, copper, zinc and Iron.
p-Block Elements
Group - 5 elements : General introduction, electronic configuration, occurrence, oxidation states, trends in physical
and chemical properties; nitrogen - preparation, properties and uses; compounds of nitrogen: preparation, properties
and uses; compounds of nitrogen: preparation and properties of ammonia and nitric acid, oxides of nitrogen (structure
only); Phosphorous-allotropic forms; compounds of phosphorous: preparation and properties of phosphine, halides
(PCl3, PCl5) and oxoacids (elementary idea only).
Group - 6 elements : General introduction, electronic configuration, oxidation states, occurrence, trends in physical
and chemical properties; dioxygen: preparation, properties and uses; simple oxdides; Ozone, Sulphur-allotropic
forms; compounds of sulphur: preparation, properties and uses of sulphur dioxide; sulphuric acid: industrial process
of manufacture, properties and uses, oxoacids of sulphur (structures only).
Group - 7 elements : General introduction, electronic configuration, oxidation states, occurrence, trends in physical
and chemical properties; compounds of halogens; preparation, properties and uses of chlorine and hydrochloric
acid, interhalogen compounds, oxoacids of halogens (structures only).
Group - 8 elements : General introduction, electronic configuration. Occurrence, trends in physical and chemical
properties, uses. (Part-II)
d- and f- Block Elements
General introduction, electronic configuration, occurrence and characteristics of transition metals, general trends
in properties of the first row transition metals - metallic character, ionization enthalpy, oxidation states, ionic radii,
colour, catalytic property, magnetic properties, interstitial compounds, alloy formation. Preparation and properties
of K2Cr2O7 and KMnO4.
Lanthanoids - electronic configuration, oxidation states, chemical reactivity and lanthanoid contraction.
Actinoids - Electronic configuration, oxidation states.
Coordination Compounds
Coordination Compounds - Introduction, ligands, coordination number, colour, magnetic properties and shapes,
IUPAC nomenclature of mononuclear coordination compounds, bonding; isomerism, importance of coordination
compounds (in qualitative analysis, extraction of metals and biological systems).
Haloalkanes and Haloarenes
Haloalkanes: Nomenclature, nature of C-X bond, physical and chemical properties, mechanism of substitution
reactions.
Haloarenes: Nature of C-X bond, substitution reactions (directive influence of halogen for monosubstituted
compounds only)
Uses and environmental effects of - dichloromethane, trichloromethane, tetrachloromethane, iodoform, freons,
DDT.
Alcohols, Phenols and Ethers
Alcohols : Nomenclature, methods of preparation, physical and chemical properties (of primary alcohols only);
identification of primary, secondary and tertiary alcohols; mechanism of dehydration, uses of methanol and ethanol.
Phenols : Nomenclature, methods of preparation, physical and chemical properties, acidic nature of phenol,
electrophillic substitution reactions, uses of phenols.
Ethers : Nomenclature, methods of preparation, physical and chemical properties, uses.
Aldehydes, Ketones and Carboxylic acids
Aldehydes and Ketones : Nomenclature, nature of carbonyl group, methods of preparation, physical and chemical
properties mechanism of nucleophilic addition, reactivity of alpha hydrogen in aldehydes; uses.
Carboxylic Acids : Nomenclature, acidic nature, methods of preparation, physical and chemical properties; uses.
Organic compounds containing Nitrogen
Amines : Nomenclature, classification, structure, methods of preparation, physical and chemical properties, uses,
identification of primary, secondary and tertiary amines.
Cyanides and Isocyanides - will be mentioned at relevant places in context.
 37

Diazonium salts : Preparation, chemical reactions and importance in synthetic organic chemistry.
Biomolecules
Carbohydrates - Classification (aldoses and ketoses), monosaccahrides (glucose and fructose), oligosaccharides
(sucrose, lactose, maltose), polysaccharides (starch, cellulose, glycogen); importance.
Proteins - Elementary idea of a - amino acids, peptide bond, polypeptides proteins, primary structure, secondary
structure, tertiary structure and quaternary structure (qualitative idea only), denaturation of proteins; enzymes.
Vitamins - Classification and functions.
Nucleic Acids: DNA & RNA.
Polymers
Classification - natural and synthetic, methods of polymerization (addition and condensation), copolymerization.
Some important polymers: natural and synthetic like polythene, nylon, polyesters, bakelite, rubber.
Chemistry in Everyday life:
1. Chemicals in medicines - analgesics, tranquilizers, antiseptics, disinfectants, antimicrobials, antifertility drugs,
antibiotics, antacids, antihistamines.
2. Chemicals in food - preservatives, artificial sweetening agents.
3. Cleansing agents - soaps and detergents, cleansing action.
--------------
 38

MATHEMATICS
SETS AND FUNCTIONS
1. Sets:
Sets and their representations, Empty set, Finite & Infinite sets. Equal sets, Subsets, Subsets of the set of real
number especially intervals (with notations). Power set, Universal set, Venn diagrams, Union and Intersection of
sets, Difference of sets, Complement of a set.
2. Relation & Functions:
Ordered pairs, Cartesian product of sets, Number of elements in the Cartesian product of two finite sets. Cartesian
product of the reals with itself (upto R X R X R). Definition of relation, pictorial diagrams, domain, condomain and
range of a relation. Function as a special kind of relation from one set to another. Pictorial representation of a
function, domain, co-domain & range of a function. Real valued function of the real variable, domain and range of
these functions, constant, identity, polynomial, rational, modulus, signum and greatest integer functions with their
graphs, Sum, difference, product and quotients of functions.
3. Trigonometric Functions:
positive and negative angles. Measuring angles in radians & in degrees and conversion from one measure to
another. Definition of trigonometric functions with the help of unit circle. Truth of the identify sin2x + cos2 x = 1, for
all x. Signs of trigonometric functions and sketch of their graphs. Expressing sin (x + y) and cos (x + y) in terms of
sin x, sin y, cos x, & cos y.
Identities related to sin2x, cos2x, tan2x, sin3x, cos3x and tan3x. General solution of trigonometric equations of the
type sin? = sina, cos? = cosa and tan? = tana. Proof and simple application of sine and cosine formula.
ALGEBRA (I)
1. Principle of Mathematical Induction :
Processes of the proof by induction, motivating the application of the method by looking at natural numbers as the
least inductive subset of real numbers. The principle of mathematical induction and simple applications.
2. Complex Numbers and Quadratic Equations:
Need for complex numbers, especially v-1, to be motivated by inability to solve every quadratic equations. Brief
description of algebraic properties of complex numbers. Argand plane and polar representation of complex numbers.
Statement of Fundamental Theorem of Algebra, solution of quadratic equations in the complex number system.
3. Linear Inequalities:
Linear inequalities. Algebraic solutions of linear inequalities in one variable and their representation on the number
line. Graphical solution of linear, inequalities in two variables. Solution of system of linear inequalities in two variables
- graphically.
4. Permutation & Combination :
Fundamental principle of counting. Factorial n. (n!) Permutation and combinations, derivation of formulae and their
connections, simple applications.
5. Binomial Theorem:
History, statement and proof of the binomial theorem for positive integral indices. Pascal's triangle, General and
middle term in binomial expansion, simple applications.
6. Sequence & Series:
Sequence and Series. Arithmetic progression (A.P.) arithmetic mean (A.M.) Geometric progression (G.P.), general
term of a G.P. Sum of n terms of a G.P., geometric mean (G.M.), relation between A.M. and G. M. Sum to n terms of
the special series , ?n and ?n2 and ?n3.
CO-ORDINATE GEOMETRY (I)
1. Straight Lines :
Brief recall of 2D from earlier classes. Slope of a line and angle between two lines. Various forms of equations of a
line : parallel to axes, point-slope form, slope-intercept form, two-point form, intercepts form and normal form.
General equation of a line, Distance of a point from a line.
2. Conic Section :
Sections of a cone : circle, ellipse, parabola, hyperbola, a point, a straight line and pair of intersecting lines as a
degenerated case of a conic section. Standard equations and simple properties of parabola, ellipse and hyperbola.
Standard equation of a circle.
 39

3. Introduction to Three Dimensional Geometry :

Coordinate axes and coordinate planes in three dimensions, Coordinates of a point. Distance between two points
and section formula.
CALCULUS (I)
1. Limits and Derivatives :
Derivative introduced as rate of change both as that of distance function and geometrically, intuitive idea of limit.
Definition of derivative, relate it to slope of tangent of the curve, derivative of sum, difference, product and quotient
of functions. Derivatives of polynomial and trigonometric functions.
MATHEMATICAL REASONING
1. Mathematical Reasoning
Mathematically acceptable statements. Connecting words / phrases - consolidating the understanding of "if and
only if (necessary and sufficient) condition", "implies", "and / or", "implied by", "and", "or", "there exists" and their
use through variety of examples related to real life and Mathematics. Validating the statements involving the
connecting words - difference between contradiction, converse and contrapositive.
STATISTICS & PROBABILITY (I)
1. Statistics :
Measure of dispersion; mean deviation, variance and standard deviation of ungrouped / grouped data. Analysis of
frequency distributions with equal means but different variances.
2. Probability :
Random experiments: outcomes, sample spaces (set representation). Events: occurrence of events, 'not', 'and' 'or'
events, exhaustive events, mutually exclusive events Axiomatic (set theoretic) probability, connections with the
theories of earlier classes. Probability of an event, probability of 'not' 'and' & 'or' events.
* RELATIONS AND FUNCTIONS.
1. Relations and Functions :
Types of relations : reflexive, symmetric, transitive and equivalence relations, One to one and onto functions,
composite functions inverse of a function, Binary operations.
2. Inverse Trigonometric Functions :
Definition, range, domain principal value branches. Graphs of inverse trigonometric functions Elementary properties
of inverse trigonometric functions.
ALGEBRA (II)
1. Matrices :
Concept, notation, order, equality types of matrices zero matrix transpose of a matrix, symmetric and skew symmetric
matrices, Addition, multiplication and scalar multiplication of matrices, simple properties of addition, multiplication
and scalar multiplication. Non-commutativity of multiplication of matrices and existence of non-zero matrices whose
product is the zero matrix (restrict to square matrices of order 2). Concept of elementary row and column operations,
Invertible matrices and proof of the uniqueness of inverse, if it exists; (Here all matrices will have real entries).
2. Determinants :
Determinant of a square matrix (up to 3 x 3 matrices), properties of determinants, minors, cofactors and applications
of determinants in finding the area of a triangle. Adjoint and inverse of a square matrix. Consistency, inconsistency
and number of solutions of system of linear equations by examples, solving system of linear equations in two or
three variables (having unique solution) using inverse of a matrix.
CALCULUS (II)
1. Continuity and Differentiability :
Continuity and differentiability, derivative of composite functions, chain rule, derivatives of inverse trigonometric
functions, derivative of implicit function. Concept of exponential and logarithmic functions and their derivatives.
Logarithmic differentiation. Derivative of functions expressed in parametric forms. Second order derivatives, Rolle's
and Lagrange's Mean Value Theorems (without proof) and their geometric interpretations.
2. Applications of Derivatives :
Applications of derivatives : rate of change, increasing/decreasing functions, tangents & normals, approximation,
maxima and minima (first derivative test motivated geometrically and second derivative test given as a provable
tool). Simple problems (that illustrate basic principle and understanding of the subject as well as real-life situations).
 40

3. Integrals :
Integration as inverse process of differentiation. Integration of a variety of functions by substitution by partial fractions
and by parts, only simple integrals. Definite integrals as a limit of a sum, Fundamental Theorem of Calculus (without
proof). Basic properties of definite integrals and evaluation of definite integrals.
4. Applications of the Integrals :
Applications in finding the area under simple curves, especially lines, areas of circles / parabolas / ellipses (in
standard form only), area between the two above said curves (the region should be clearly identifiable).
5. Differential Equations :
Definition, order and degree, general and particular solutions of a differential equation. Formation of differential
equation whose general solution is given. Solution of differential equations by method of separation of variables,
homogeneous differential equations of first order and first degree. Solutions of linear differential equation of the
type:

dy
____ + py = q, where p and q are functions of x.
dx

VECTORS AND THREE DIMENSIONAL GEOMETRY (II)

1. Vectors :
Vectors and scalars, magnitude and direction of a vector. Direction cosines / ratios of vectors. Types of vectors
(equal unit zero parallel and collinear vectors), position vector of a point, negative of a vector, components of a
vector, addition of vectors, multiplication of a vector by a scalar, position vector of a point dividing a line segment in
a given ratio. Scalar (dot) product of vectors, projection of a vector on a line. Vector (cross) product of vectors.
2. Three - dimensional Geometry :
Direction cosines / ratios of a line joining two points. Cartesian and vector equation of a line, coplanar and skew
lines, shortest distance between two lines. Cartesian and vector equation of a plane. Angle between (i) two lines,
(ii) two planes, (iii) a line and a plane. Distance of a point from a plane.
LINEAR PROGRAMMING
1. Linear Programming :
Introduction, definition of related terminology such as constraints, objective function, optimization, different types
of linear programming (L.P.) problems, mathematical formulation of L.P. problems, graphical method of solution for
problems in two variables, feasible and infeasible regions, feasible and infeasible solutions, optimal feasible solutions
(up to three non-trivial constaints).
PROBABILITY (II)
1. Probability :
Multiplication therorem on probability. Conditional probability, independent events, total probability, Baye's theorem,
Random variable and its probability distribution, mean and variance of haphazard variable. Repeated independent
(Bernoulli)trials and Binomial distribution.

----------
 41

BIOLOGY

DIVERSITY IN LIVING WORLD

- Diversity of living organism.
- Classification of the living organisms (five kingdom classification, major groups principles of classification within
each kingdom).
- Systematics and binomial system of nomentlature.
- Salient features of animal (non chlordates up to phylum level, and chlordates up to class level) and plant (major
groups; Angiosperms up to subclass) classification.
- Botanical garden, herbaria, zoological parks museums.
STRUCTURAL ORGANISATION IN ANIMALS AND PLANTS
Tissues in animals and plants.
Morphology, anatomy and functions of different parts of flowering plants : Root, stem, leaf, inflorensence, flower,
fruit and seed.
Morphology, anatomy and functions of different systems of an annelid (earthworm), an insect (cockroach) and an
amphibian (frog.)
CELL : STRUCTURE AND FUNCTION
Cell : Cell wall, cell membrane and cell organelles (plastids, mitochondria, endoplasmic reticulum, Golgi bodies/
dictyosomes, ribosomes, lysosomes, vacuoles, centrioles) and nuclear organisation.
Mitosis, meiosis, cell cycle.
Basis chemical constituents of living bodies.
Structure and functions of carbohydrates, proteins, lipids and nucleic acids.
Enzymes : Types, properties and function.
PLANT PHYSIOLOGY
Movement of water, food, nutrients and gases.
Plants and Water : Mineral nutrition
Respiration
Photosynthesis
Plant growth and development
HUMAN PHYSIOLOGY
Digestion and absorption.
Breathing and respiration
Body fluids and circulation
Excretory products and elimination
Locomotion and movement
Control and coordination
* SEXUAL REPRODUCTION
- Pollination and fertilization in flowering plants.
- Development of seeds and fruits.
- Human reproduction : reproductive system in male and female, menstrual cycle. Production of gametes, fertilization,
implantation, embryo development,, pregnancy and parturation.
- Reproductive health-birth control, contraception and sexually transmitted diseases.
GENETICS AND EVOLUTION
- Mendelian inheritance.
- Chromosome theory of inheritance, deviations from Mendelian ratio (gene interaction-Incomplete dominance, co-
dominance, complementary genes, multiple alleles.)
- Sex determination in human beings: XX, XY.
- Linkage and crossing over.
- Inheritance pattern of haemophilia and blood groups in human beings.
 42

- DNA : replication, transcription, translation.

- Gene expression and regulation.
- Genome and Human Genome Project.
- DNA fingerprinting.
Evolution : Theories and evidences.
BIOLOGY AND HUMAN WELFARE
- Animal husbandry.
- Basic concepts of immunology, vaccines.
- Pathogens, Parasites.
- Plant breeding, tissue culture, food production.
- Microbes in household food processing, industrial production, sewage treatment and energy generation.
- Cancer and AIDS.
- Adolescene and drug/alcohol abuse.
BIOTECHNOLOGY AND ITS APPLIATIONS
- Recombinant DNA technology.
- Applications in Health, Agriculture and Industry.
- Genetically modified (GM) organism; biosafety issues.
- Insulin and Bt cotton.
ECOLOGY & ENVIRONMENT
Ecosytems: components, types and energy flow.
Species, population and community.
Ecological adaptations.
Centres of diversity and conservation of biodiversity, national parks and sanctuaries.
Environmental issues.

----------
 43

AGRICULTURE
I. Introductory Agriculture and Agro meteorology
- Definition of Agriculture, Brief history of Agriculture.
- Disciplines of Agriculture: Agronomy, Soil Science, Plant breeding and genetics, Horticulture, Entomology, Plant pathology,
Extension education, Agricultural economics, Agricultural engineering, Agricultural statistics ( One paragraph description on
each discipline)
- National and International agricultural institutes in India.
- Agro climatic Zones of India and Bihar.
- Elements of Weather-rainfall, temperature, humidity, wind velocity, sunshine, weather forecasting' Climate change in
relation to crop production.
- Tillage: Definition, Objective and types of tillage.
- Tillage implements (primary, secondary and inter tillage).
- Soil tilth, its importance and effect on soil properties.
- Tillage practices (conventional) Vs. conservation and zero tillage).
- Methods of sowing / planting, Depth of sowing, transplanting and harvesting.

II. Soil as a medium of plant growth

- Soil as a natural three dimensional resource.
- Soil classification, major soils of India/ Bihar.
- Soil profile, soil texture and structure, Soil Organism, Soil reaction / pH.
- Soil water.
- Soil fertility & productivity and their indicators.
- Essential plant nutrients, their functions and deficiency symptoms.
- Sufficiency and toxic levels of nutrients.
- Fertilizers, manures, bio-=fertilizers, integrated nutrient management.
- Fertilizer placement, top dressing ad foliar application.

III. Plant breeding and genetics.

- Mendle's Laws of inheritance and its exception and significance.
- Qualitative and quantitative traits and their inheritance.
- Plant Breeding: Definition, history, objective and its achievements.
- Hetrosis, its basis and exploitation.
- Breeding methods for crop improvement:- Introduction, selection, hybridization, mutation, polyploidy, population improve-
ment.
- Recent method of crop improvement, plant biotechnology and genetic engineering.
- Plant Genetic Resources: their collection, conservation and utilization.
- Seed: Formation, classification and multiplication.
- Intellectual Property Right: Definition, Classification and its importance.

IV. Agricultural Engineering

- Agricultural Implements:- cultivators, M.B. plough, Disc, Zero till seed drill, Rotavator, Power tiller, Tractor, Harvester
- Engine- I.C. Engine: parts of engine and their work. Working of I.C. Engine, Working of 2 and 4 stroke engines. Difference
between 2 stroke and 4 stroke engine, Difference between diesel and petrol engine, problems and troubleshooting of engine,
Maintenance of engine, Maintenance after 100 hours and Maintenance after 500 hours.
- Electric motor: D.C. and A.C. 3 phase induction motor, Single phase induction motor, Types of motor, Capacitor, Selection
of electric motor.
- Sowing: Method of seeding or sowing, Seed-cum-fertilizer drill, Calibration of seed drill machine, thresher- its working and
maintenance, winnower.
- Harvesting Equipment, working principle of mower, Problems and maintenance of harvesting equipments.

V. Crop protection
- Importance of crop insect-pests, diseases, nematodes, rodents.
- Important insect-pest and diseases of field crops, vegetables, fruits and stored grain pests and their management.
- Methods of control of insect-pest and disease:- Physical, Mechanical, Cultural, biological, chemical, antocidal, legal method
and integrated pest management.
- Pesticides and their classification, symptoms of poisoning, First aids and antidotes.
- Harmful effects of insecticides.
- Effect of environment (temperature, moisture, wind, light, soil pH) on pest development.
 44

Animal Husbandry, Dairy and Fish Production

- Importance of livestock in agriculture & industry
- Important developmental programmes by Central or State Government for improvement of livestock ( Operation Flood)
- Important indigenous and exotic breeds of Cattle, buffalo, sheep, goat & poultry.
- System of housing in cattle & poultry.
- Principles of feeding.
- Management of cattles at the time of (i) calving (ii) new born calf (iii) heifers (iv) milch animals (v) pregnant animals and
poultry (vi) Bullocks (Chicks pullets, Layers, Broilers)
- Principles of feeding of different classes of animals, calves, pregnant animals, lactating animals, Bullocks and Poultry
(Chicks, Pullets, Layers & Broilers)
- Methods of conservation of green fodder (hay making & silage making)
- Sign of sick & healthy animals, etiology symptoms, prevention and control of common diseases in cattle & poultry.
(i) Rinderpest (ii) Foot & mouth disease (iii) Rabies (iv) Haemorrahagicsepticaemia (v) Black quarter (vi) Mastitis (Vii)
Trypanosoniasis (viii) Basesiosis (ix) Coccidiosis (x) Ranikhat disease (xi) Fowl pox (xii) I.B.D. or Gumboro disease.
- Artificial insemination (Definition, Benefits, Drawbacks).
- Principle and methods of milking, clean milk production.
- Modern methods of fish production.

Crop Production

Cultivation of crops:
Economic importance, origin, distribution, soil and climatic requirement, varieties, cultural practices (Seed bed preparation,
seed treatment, time and method of sowing/ planting, seed rate; dose, method and time of fertilizer application, irrigation, inter culture
and weed control; common pests and diseases caused by bacteria, fungi, virus and nematode, integrated pest management, harvesting,
threshing, post harvest technology, storage, processing and marketing and major production constraints) of following crops:
- Cereals: Paddy, Wheat, maize.
- Pulses: pigeon pea, gram, lentil, pea mung bean, urd bean.
- Oilseeds: Groundnut, rapeseed and mustard, Linseed, sunflower.
- Cash crops: Sugarcane, jute.
- Fooder and forage crops: Sorghum, maize, oat, napier grass berseem

Cropping system
- Crop rotation, sequential cropping, mixed cropping, inter cropping, parallel cropping multi-storied cropping, multiple
cropping, cropping system / cropping pattern, cropping intensity.
- Important cropping system for rainfed and irrigated ecosystem of Bihar.

Soil and water management

- Water requirement, Irrigation requirement, concept of irrigation scheduling.
- Field capacity, permanent wilting point, plant available water.
- Method of irrigation.
- Importance of drainage, drainage methods.
- Problem soils and its management-saline alkaline, acid soil and water logged (Diara and Tal)

Weed management
1. Definition of weeds, Characteristics of weeds, Harmful and beneficial effects of weeds.
2. Crop-weed competition,
3. Weed management : Principles, mechanical, cultural, chemical, biological, Integrated weed management.
4. Herbicides.

Recent trends in agriculture

Organic farming, Integrated farming system, recycling of plant nutrients, precision farming, watershed management, ground
water recharge, targeted yield concept.

Agricultural economics
- Major economic problems in agriculture.
- Role and share of agriculture in state economy.
- Land use classification.
- Land distribution and size of holding.
 45

- Area, production, and productivity of major crops in the state with reference to country.
- Marketing of agricultural produce, cooperative farming, corporate farming, contract farming, integrated value chain

I. Basic Horticulture
- Importance of fruits and vegetables in human diet.
- Area & production of horticultural crops and its future prospect.
- Classification of horticultural crops according to climatic adaption and economic use.
- Planting system, high density orchard, training, pruning, intercropping and rejuvenation of fruit trees.
- Protection from frost and sunburn
- Plant propagation and nursery management.

II. Fruit Production

- Establishment of new orchards and its layout.
- Coltivation of major fruit crops :
Mango, Papaya, Banana, Guava, Citrus, Litchi, Strawberry, Coconut, Aonla, Ber, Jack fruit.

III. Vegetable production

- Cultivation practices of major vegetables -
Radish, Carrot, Sugar beet, Potato, Onion, Garlic, Chillies, Cauliflower, Brinjal, Tomato, Spinach, Cabbage, Elephant foot
yam, Colocasia, Corriender, Pointed gourd, Bottle gourd, Bitter gourd, Sponge gourd and Cucumber, Bhindi, Cowpea, French
bean, Pea.
- Nutritional kitchen gardening.

IV. Flowers, medicinal and aromatic plants

- Cultivation of Chrysanthemums, Roses, Dahlia, Marigold, Tube rose, Gladiolus.
- Cultivation of ornamental shrubs, avenue trees, and climbers.
- Cultivation of Mentha, Lemon grass, Citronella.
- Introduction of medicinal plants.

V. Presevation of fruits and vegetables

- Principles and methods of fruit and vegetable preservation.
- Preparation of fruit squash, jellies, jams, ketchup, chips, pickles and their packing.

VI. Extension education

- Extension education : Definition, Scope, Objective, Importance.
- Extension methods and tools.

------------
2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]

प
रिश ट–ज-1

आधुिनक िच कसा पित म एमबीबीएस पाम

पाम म दािखले के संबध
ं म ‘िवकलांग यिय
यिय के अिधकार अिधिनयम,
अिधिनयम,

2016’ के अंतगत “िविश ट िवकलांगता"” वाले छा$ के दािखले से संबि

2016’ ं धत दशािनद'श

टपणी:
णी:

1. “िवकलांगता का माणप6 ”, 15 जून, 2017 को सामािजक Aया य एवं अिधका रता मं6ालय , [िवकलांग Cयि
+दCयां
( गजन) सशकरण ारा िवभाग] भारत के राजप6 म$ अिधसूिचत Cयिय
िवकलांग के अिधकार

+कया
िनयमावली, 2017 के अनुसार जारी जाएगा।

2. +कसी Cयि म$ िविशDट “ क िवकलांगता” Aया अिधका रता मं6ा

सीमा, 4 जनवरी, 2018 को सामािजक य एवं लय,

[िवकलांग Cयि +दCयां सशकरण

( गजन) ारा राजप6 म$
िवभाग] भारत के Cयिय अिधसूिचत “िवकलांग के

अिधकार अिधिनयम, 2016 (2016 का 49) के अंतग(त +कए +कसी Cयि म$ िविशDट
शािमल गए क िवकलांगता

सीमा आंकने के उGेHय +दशािनद?श

के िलए आंक ” के अनुसार जाएगी।

3. िविशDट Cयिय
िवकलांगता वाले आर.ण ाIत क दृि:
के िलए का लाभ क Aयू िडJी
करने से िवकलांगता नतम

40% ( बKचमाक( िवकलांगता) होनी चािहए।

4. “शारी रक Lप शMद
से िवकलांग” (शा.िव.) Cयि Cय शMद इते +कए
के बजाए ‘िवकलांग ’ (िव. .) का माल जाएगा।

.सं. िवकलांगता िवकलांगता का कार िविनदट क रज

िवकलांगता

कार िवकलांगता मेिडकल पा
म के िलए

मेिडकल मेि डकल

पा
म के िलए पा, िवकलांग यि

यि कोटा पा
म
पा, िवकलांग के िलए पा के िलए

यि
यि कोटा के पा नह#
िलए पा नह#
1. शारीरक क. िविन द ट िवकलांगता क. कु ठ रोग से मुत 40% से कम 40-80%िवकलांगता: 80% से
िवकलांगता सिहत गितक िवकलांगता यि* िवकलांगता 80% से अिधक िवकलांगता अिधक
(क से च) ख. :मि-त क%य िवकलांगता
वाले यिय को भी
प(ाघात** मामला दर मामला आधार
ग. बौनापन पर अनुमित दी जा सकती
घ. मांसपेशीय है और उनक% काया&'मक
िड-=ाफ% स(मता, सहायक उपकरण,
ङ. तेजाब के :हार से य+द इनका इ-तेमाल +कया
पीिडत जा रहा है, क% सहायता से,
च. अAय***जैसे यह देखने के िलए, िनधा&रत
अंगिवBछेदन, क% जाएगी +क या इसे
पोिलयोDयेलाइटस 80% से नीचे लाया गया है
आ+द और या उनके पास ऐसी
पया&2 चालक यो4यता है, जो
यह पाठय5म जारी रखने
और संतोषजनक ढंग से पूरा
करने के िलए आव7यक है।

* ऊं गिलय, हाथ मG संवेदन क% (ित, अंगिवBछेद और आंख क% अंतH&-तता पर Iयान

+दया जाना चािहए तथा तदनुJपी अनुशंसाएं देखी जानी चािहए।
**दृिL, Mवण क% संNाना'मक काय& क% (ित पर Iयान +दया जाना चािहए और तOनुJपी
अनुशंसाएं देखी जानी चािहए।
***िच+क'सा पाP5म के िलए पाQ माने जाने के िलए दोन हाथ का, अ(ुRण
संवेदना, पया&Sत शि और गित के रGज के साथ अ(ुRण होना आव7यक है।
ख. दृिL (ित क. नेQहीनता 40% से कम 40% के
(*) ख. िनDन दृिL िवकलांगता बराबर या
¹Hkkx IIIµ[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 3

.सं. िवकलांगता िवकलांगता का कार िविनदट क रज

िवकलांगता

कार िवकलांगता मेिडकल पा
म के िलए

मेिडकल मेि डकल

पा
म के िलए पा, िवकलांग यि

यि कोटा पा
म
पा, िवकलांग के िलए पा के िलए

यि
यि कोटा के पा नह#
िलए पा नह#
इससे
अिधक
-
िवकलांगता
ग. Mवण (ित@ क. बहरा 40% से कम 40% के
ख. कम सुनाई देना िवकलांगता - बराबर या
इससे कम
िवकलांगता

(*)40% से अिधक क% दृिL (ित/ दृिL िवकलांगता वाले यिय को एमबीबीएस

िच+क'सा िश(ा मG पढ़ने के िलए पाQ बनाया जा सकता है और इस शत& के अधीन
आर(ण +दया जा सकता है +क दृिL िवकलांगता को आधुिनक िनV दृिLसहायक उपकरण
जैसे+क टेली-कोप/ मैWीफायर इ'या+द क% सहायता से 40% के बXचमाक& से कम के -तर
तक लाया जाए।

@ 40% से अिधक क% Mवण िवकलांगता वाले यिय को एमबीबीएस िच+क'सा

िश(ा मG पढ़ने के िलए पाQ बनाया जा सकता है और इस शत& के अधीन आर(ण +दया जा
सकता है +क Mवण िवकलांगता को सहायक उपकरण क% सहायता से 40% के बXचमाक&
से कम के -तर तक लाया जाए।
इसके अलावा, यि के पास 60%से अिधक का वाक् िववेक -कोर होना चािहए।
घ.वाक् एवं भाषा आग&िनक/तंQीय कारण 40% से कम - 40% के
िवकलांगताएं$ िवकलांगता बराबर या
इससे कम
िवकलांगता

$वाक्बुिZमता :भािवत (एसआईए) वाले \ि एमबीबीएस पाP5ममG पढ़ने के िलए पाQ हगे, बशत] वाक् बुिZमता
:भािवत (एसआईए) -कोर 3 (तीन) से अिधक न हो, जो+क 40% या उससे कम हो।
वाचाघात वाले \ि एमबीबीएस पाP5ममG पढ़ने के िलए पाQ हगे, बशत] +क वाचाघात लि`ध (एयू) 40%या उससे
कम हो।

2. बौिZक क. िविश टNानाज&न # वत&मान मG एसपीएलडी क% गंभीरता आंकने के िलए कोई

िवकलांगता िवकलांगताएं
(बोधा'मक माQाकरण पैमाना नहe है, इसिलए 40% का कट ऑफ,
िवकलांगताएं, मनमाना है और इसके िलए अिधक साfय क% आव7यकता है।
िड-लेिसया, 40% से कम 40% के बराबर या 80% से
िवकलांगता इससे अिधक िवकलांगता अिधक या
िड-के लकु िलया, और 80% के बराबर या
िड--:ािसया और गंभीर -वJप
इससे कम िवकलांगता। या पया&Sत
िवकासा'मक
एफािसया)# परंतु चयन, रमेिडएशन सं Nाना'म क/
सहायता :ाSत बौिZक
:ौgोिगक%/उपकरण/ िवकलांगता
िवशेषN पैनल iारा +कए
गए अवसंरचना'मक
परवत&न क% सहायता
से मूjयांकन क% गई
Nानाज&न स(मता पर
आधारत होगा।
4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]

.सं. िवकलांगता िवकलांगता का कार िविनदट क रज

िवकलांगता

कार िवकलांगता मेिडकल पा
म के िलए

मेिडकल मेि डकल

पा
म के िलए पा, िवकलांग यि

यि कोटा पा
म
पा, िवकलांग के िलए पा के िलए

यि
यि कोटा के पा नह#
िलए पा नह#
ख. आ'म-िवमोह िवकलांगता का मानिसक बीमारी क% 60% से
-पैक=म िवकृ ित अभाव या मौजूदगी या सीमा अिधक
मामूली -थािपत करने क% उmे7य िवकलांगता या
िवकलांगता परक पZित के अभाव के संNाना'मक/
अ-परजर kसlोम कारण सं-तुत नहe +कया बौिZक
(आईएसएए के गया। तथािप, िवकलांगता
अनुसार 40%- आर(ण/कोटे के लाभ और/ या य+द
60% तक क% पर, िवकलांगता आंकने यि,
िवकलांगता) क% बेहतर पZितयां िवशेषN पैनल
जहां यि को िवकिसत कर िलए जाने iारा
+कसी िवशेषN के प7चात िवचार +कया एमबीबीएस
पैनल iारा जा सकता है। पाP5म जारी
एमबीबीएस के रखने के िलए
िलए उपयुत अनुपयुत
माना जाता है। बताया गया है।

3. मानिसक मानिसक रोग िवकलांगता का मानिसक बीमारी क% 40% के

यवहार अभाव या मौजूदगी या सीमा बराबर या
मामूली -थािपत करने क% उmे7य इससे अिधक
िवकलांगता: परक पZित के अभाव के िवकलांगता या
40% से कम कारण सं-तुत नहe +कया य+द यि को
(आईडीईएएस के गया। तथािप, अपनी nूटयां
अंतग&त) आर(ण/कोटे के लाभ करने के िलए
पर, िवकलांगता आंकने अनुपयुत
क% बेहतर पZितयां माना जाता है।
िवकिसत कर िलए जाने “मेिडिसन मG
के प7चात िवचार +कया :ैिटस करने
जा सकता है। के िलए
+फटनेस” क%
परभाषा के
िलए मानक
तैयार +कए
जाए िजनका
जैसे +क भारत
के अलावा
अAय देश के
अनेक सं-थान
iारा इ-तेमाल
+कए जाते हX।
4. आगेउjलेिखत क. िचरकािलक तंिQका i. बoलऊतकदृढ़न 40% से कम 40%-80% 80%
के कारण संबंधी ि-थितयां िवकलांगता िवकलांगता से अिधक
ii. पा कनसोिनpम
िवकलांगता िवकलांगता
ख. रत िवकृ ितयां i. हीमोफ%िलया 40% से कम 40%-80% 80%
ii. थैिलसीिमया िवकलांगता िवकलांगता से अिधक
िवकलांगता
iii. िसकल सैल रोग
¹Hkkx IIIµ[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 5

.सं. िवकलांगता िवकलांगता का कार िविनदट क रज

िवकलांगता

कार िवकलांगता मेिडकल पा
म के िलए

मेिडकल मेि डकल

पा
म के िलए पा, िवकलांग यि

यि कोटा पा
म
पा, िवकलांग के िलए पा के िलए

यि
यि कोटा के पा नह#
िलए पा नह#
5. मूक बिधरता उपयु&त मG से एक से उपयु&त मG +कसी क% मौजूदगी के संबधं मG अलग अलग मामल
सिहत बoल अिधक िविन द ट क% अनुशंसा मG िनण&य लेते समय उपयु&त सभी नामत: बoल
िवकलांगताएं िवकलांगताएं िवकलांगता के एक घटक के Jप मG दृिL, Mवण, वाक् और भाषा
िवकलांगता, बौिZक िवकलांगता और मानिसक रोग िवकलांगता
पर िवचार +कया जाना चािहए जब +कसी यि मG एक से
अिधक असमथ&कारी ि-थित मौजूद है, उ'पAन होने वाली
िवकलांगता क% संगणना करने के िलए, भारत सरकार iारा
जारी क% गई संबंिधत राजपQ अिधसूचना iारा अिधसूिचत
संयोजनकारी फामू&ले क% अनुशंसा क% जाती है:
क+ ख (90-क )
90
(जहां क = िवकलांगता के % का उBच मूjय और ख =
िवकलांगता के % का िनDन मूjय जो िभAन-िभAन िवकलांगता
के िलए परकिलत +कया गया हो। इस फामू&ले का इ-तेमाल बoल
िवकलांगता वाले मामल मG +कया जाए और यि िवशेष के
मामले मG मौजूद िविश ट िवकलांगता के अनुसार दािखले
और/या आर(ण के संबंध मG अनुशसं ा क% जाए।

BOARD OF GOVERNORS IN SUPER-SESSION

OF MEDICAL COUNCIL OF INDIA

AMENDMENT NOTIFICATION

New Delhi, the 13th May, 2019

No.MCI-34(41)/2019-Med./112862 — In exercise of the powers conferred by Section 33 of the Indian Medical

Council Act, 1956 (102 of 1956), the Board of Governors in super-session of Medical Council of India with the previous
sanction of the Central Government, hereby makes the following Regulations to further amend the “Graduate Medical
Education Regulation, 1997”, namely: —

1. (i) These Regulations may be called the “Graduate Medical Education Regulations, (Amendment), 2019".

(ii) They shall come into force from the date of their publication in the Official Gazette.

2. In the “Regulations on Graduate Medical Education, 1997”, in Appendix “H” - Guidelines regarding
admission of students with “Specified Disabilities” under the Rights of persons with Disabilities Act, 2016 with respect
to admission in MBBS –shall be substituted with Appendix “H-1”.

DR. R. K. VATS Secy General

[Advt.-III/4/Exty./45/19]

Foot Note: The Principal Regulations namely, “Graduate Medical Education Regulations, 1997”were published in
Part – III, Section (4)of the Gazette of India vide Medical Council of India notification dated 4th March,
1997, and amended vide MCI notifications dated 29/05/1999, 02/07/2002, 30/09/2003, 16/10/2003,
01/03/2004, 20/10/2008, 15/12/2008, 22/12/2008, 25/03/2009, 19/04/2010, 07/10/2010, 21/12/2010,
15/02/2012, 29/12/2015, 05/08/2016, 21/09/2016, 10/03/2017, 04/07/2017, 23/01/2018, 06/02/2018,
21/05/2018 & 05/02/2019.
6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]

Appendix “H - 1”

Guidelines regarding admission of students with “Specified Disabilities” under the Rights of Persons with
Disabilities Act, 2016 with respect to admission in MBBS Course.

Note : 1. The “Certificate of Disability” shall be issued in accordance with the Rights of Persons with Disabilities
Rules, 2017 notified in the Gazette of India by the Ministry of Social Justice and Empowerment [Department
of Empowerment of Persons with Disabilities (Divyangjan)] on 15th June 2017.

2. The extent of “specified disability” in a person shall be assessed in accordance with the “Guidelines for
the purpose of assessing the extent of specified disability in a person included under the Rights of
Persons with Disabilities Act, 2016 (49 of 2016)” notified in the Gazette of India by the Ministry of
Social Justice and Empowerment [Department of Empowerment of Persons with Disabilities (Divyangjan)]
on 4th January 2018.

3. The minimum degree of disability should be 40% (Benchmark Disability) in order to be eligible for availing
reservation for persons with specified disability.

4. The term ‘Persons with Disabilities’ (PwD) is to be used instead of the term ‘Physically Handicapped’
(PH).

Disability Range
Disability Type

S. Type of Specified Disability Eligible for Eligible for Medical Course, Not Eligible for
No. Disabilities Medical Eligible for PwD Quota Medical Course
Course, Not
Eligible for
PwD Quota

1. A. a. Leprosy cured person* Less than 40-80% disability More than 80%
Locomotor 40% disability Persons with more than 80%
Disability, b. Cerebral Palsy** disability may also be
including allowed on case to case basis
Specified c. Dwarfism and their functional
Disabilities competency will be
(a to f). d. Muscular Dystrophy determined with the aid of
assistive devices, if it is being
e. Acid attack victims used, to see if it is brought
below 80% and whether they
f. Others*** such as possess sufficient motor
Amputation, Poliomyelitis, ability as required to pursue
etc. and complete the course
satisfactorily.
Physical Disability

* Attention should be paid to loss of sensations in fingers and hands, amputation, as well as
involvement of eyes and corresponding recommendations be looked at.

** Attention should be paid to impairment of vision, hearing, cognitive function etc. and
corresponding recommendations be looked at.

*** Both hands intact, with intact sensations, sufficient strength and range of motion are essential to
be considered eligible for medical course.

B. Visual a. Blindness Less than Equal to or More

Impairment 40% disability than 40% Disability
(*) b. Low vision -
C. Hearing a. Deaf Less than Equal to or more
impairment@ 40% - than 40% Disability
Disability
b. Hard of hearing

(*) Persons with Visual impairment / visual disability of more than 40% may be made eligible to
pursue MBBS Course and may be given reservation, subject to the condition that the visual
disability is brought to a level of less than the benchmark of 40% with advanced low vision aids
¹Hkkx IIIµ[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 7

Disability Range

Disability Type
S. Type of Specified Disability Eligible for Eligible for Medical Course, Not Eligible for
No. Disabilities Medical Eligible for PwD Quota Medical Course
Course, Not
Eligible for
PwD Quota

such as telescopes / magnifier etc.

@ Persons with hearing disabilityof more than 40% may be made eligible to pursue MBBS
Courseand may be given reservation, subject to the condition that the hearing disability is brought to
a level of less than the benchmark of 40% with the aid of assistive devices.
In addition to this, the individual should have a speech discrimination score of more than 60%.

D. Speech Organic/ neurological Less than - Equal to or more

& language causes 40% than 40%
disability$ Disability Disability

$ Persons with Speech Intelligibility Affected (SIA) shall be eligible to pursue MBBS Courses, provided Speech
Intelligibility Affected (SIA) score shall not exceed 3 (three), which is 40% or below.

Persons with Aphasia shall be eligible to pursue MBBS Courses, provided Aphasia Quotient (AQ) is 40% or below.

2. a. Specific learning # currently there is no Quantification scale available to assess the

Intellectual disability

disabilities (Perceptual severity of SpLD, therefore the cut-off of 40% is arbitrary and more
disabilities, Dyslexia, evidence is needed.
Dyscalculia, Dyspraxia & Less than Equal to or more than 40% More than 80% or
Developmental aphasia)# 40% disability and equal to or less severe nature or
Disability than 80%. significant
But selection will be based cognitive/
on the learning competency intellectual
evaluated with the help of disability.
the remediation/ assisted
technology/ aids/
infrastructural changes by
the Expert Panel.
b. Autism spectrum Absence or Currently not recommended More than 60%
disorders Mild due to lack of objective disability or
Disability, method to establish presence presence of
Asperger and extent of mental illness. cognitive/intellectual
syndrome However, the benefit of disability and/or if
(disability of reservation/quota may be the person is unfit
upto 60% as considered in future after for pursuing MBBS
per ISAA) developing better methods of course by an expert
where the disability assessment. panel.
individual is
fit for MBBS
course by an
expert panel.
3. Mental illness Absence or Currently not recommended Equal to or more
Mental behaviour

mild due to lack of objective than 40% disability

Disability: method to establish presence or if the person is
less than 40% and extent of mental illness. unfit to perform
(under However, the benefit of his/her duties.
IDEAS) reservation/quota may be Standards may be
considered in future after drafted for the
developing better methods of definition of
disability assessment. “fitness to practice
medicine”, as are
used by several
institutions of
countries other than
India.
8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]

Disability Range

Disability Type
S. Type of Specified Disability Eligible for Eligible for Medical Course, Not Eligible for
No. Disabilities Medical Eligible for PwD Quota Medical Course
Course, Not
Eligible for
PwD Quota

4. a. Chronic i. Multiple Sclerosis Less than 40-80% disability More than 80%
Disability caused due
to

Neurological 40%
Conditions ii. Parkinsonism Disability
b. Blood i. Haemophilia Less than 40-80% disability More than 80%
Disorders 40%
ii. Thalassemia Disability

iii. Sickle cell disease

5. More than one of the above Must consider all above while deciding in individual cases
Multiple disabilities including deaf blindness

specified disabilities recommendations with respect to presence any of the above, namely,
Visual, Hearing, Speech & Language disability, Intellectual
Disability, and Mental Illness as a component of Multiple Disability.
Combining Formula as notified by the related Gazette Notification
issued by the Govt. of India

a + b(90-a)
90
(where a= higher value of disability % and b=lower value of
disability % as calculated for different disabilities)
is recommended for computing the disability arising when more than
one disabling condition is present in a given individual. This formula
may be used in cases with multiple disabilities, and recommendations
regarding admission and/or reservation made as per the specific
disabilities present in a given individual.

Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054. Digitally signed
ALOK by ALOK KUMAR
Date: 2019.05.16
KUMAR 15:37:29 +05'30'
 54

2 (II)

11

V
 55

2(iii)

II

(i)

(ii)

(iii)

(iv)

(i)

(ii)

(iii)

(iv)

(v)
56

3
C.1
57

C.2

C.2
58

C.3
59

4
 60

S.No. Name of Medical Colleges / Speciality for Disability

Institutions
----- ---------------------------------------- ---------------------------------------------------------
PMCH, Patna Visual Impairment / Locomotor Disability
2. NMCH, Patna Visual Impairment / Locomotor Disability
3. IGIMS, Patna Visual Impairment / Hearing and Speach Disability
4. DMCH, Darbhanga Visual Impairment / Locomotor Disability
5. JLNMCH, Bhagalpur Visual Impairment / Locomotor Disability
6. ANMMC, Gaya Visual Impairment / Locomotor Disability
7. SKMCH, Muzaffarpur Visual Impairment / Locomotor Disability
8. GMCH, BETTIAH Locomotor Disability
9. BMIMS, PAWAPURI Locomotor Disability
10. JKTMC & H. MADHEPURA Locomotor Disability

_______
 61

6
CERTIFICATE OF DISABILITY FOR ADMISSION IN MEDICAL / ENGINEERING / AYUSH /
AGRICULTURE COURSES

Certificate No.: ................................. Dated: ................................. Same photo as given in

Online Application
Name of the Designated Centre : ........................................................................... Form duly attested by
the issuing authority
This is to certify that Mr. / Ms. ............................................................................................
Aged: ..................... years Son / Daughter of Mr. .................................................................
Residential Address : ............................................................................................................
...............................................................................................................................................
BCECE 2024 Roll No. : ............................................. DQ Rank ................................................... has the following
disability (name of the specified disability) ............................................................................................................ in
(percentage) of ......................................... (in words) ........................................................................, (In figure).

* Please tick on the “Specified Disability”

SN. Disability Type Type of Disability Specified Disability

1. Physical Disability A. Locomotor Disability* a. Leprosy cured person, b. Cerebral Palsy, c. Dwarfism, d. Muscular
Dystrophy, e. Acid attack Victims, f. other such as amputation,
pollomyelitis
B. Visual Impairment* a. Blindness
b. Low Vision
C. Hearing Impairment* a. Deaf
b. Hard of hearing
D. Speech & Language Disability a. Organic / Neurological causes

2. Intellectual Disability a. Specific Learning Disabilities (Perceptual disabilities,

Dyslexia, Dysgraphia, Dyscalculia, dysprexia & Development
Aphasia
b. Autism Spectrum Disorders

3. Mental Behaviour a. Mental illness

4. Disability caused due to a. Chronic Neutological conditions i. Multiple Scierosis

ii. Parkinson’s disease

b. Blood Disorders i. Heamophilia, ii. Thalassemia, iii. Sickle Cell Disease

5. Multiple Disability including More than one of the above-specified disabilities

Deaf Blindness

* Conclusion: He / She is Eligible / Not Eligible for admission in Medical / Engg. / Agriculture Courses as per the
Notification(s) subject to his being otherwise medically fit.
# Functional competency with the aid of Assistive devices in case of Locomotor* / Visual* / Hearing* Impairment,
if any .....................
Sign. & Name ........................ Sign. & Name ........................ Sign. & Name ........................
(Concerned Specialist) (Concerned Specialist) (Concerned Specialist)

(Signature of Principal)
Name : .....................................
Name of Institution
 62
Annexure-7
Diploma / Under Graduate Engineering Entry Level qualification 10+2 Level
Sl. Major Disciplines Mandatory Course at 10+2 level Other relevant course(S) for this discipline
--- ------------------------------- ----------------------------------------- ------------------------------------------------------
1. Aeronautical Engineering Phy, Chem, Maths NA
2. Agriculture Engineering** Phy, Chem Math / Biology / Biotechnology / Agriculture /
or Agriculture Stream
Agriculture Stream
3. Architecture As per Norms of Council of Architecture (CoA)
4. Planning Maths For remaining two courses select any courses
out of 14*
5. Biotechnology** Phy, Chem Select any one from Bio/ Biotechnology / Maths
6. Ceramic Engineering Phy, Chem, Math NA
7. Civil Engineering Phy, Chem, Math NA
8. Computer Science and Phy, Maths For remaining single course select any courses
Engineering out of 14*
9. Chemical Engineering Phy, Chem, Math NA
10. Dairy Engineering Phy, Chem, Math NA
11. Electrical Engineering Phy, Maths For remaining single course select any courses
out of 14*
12. Energy Engineering Phy, Chem, Math NA
13. Electronics Engineering Phy, Maths For remaining single course select any courses
out of 14*
14. Mechanical Engineering Phy, Chem, Math NA
15. Fire and Safety Phy, Chem, Math NA
Engineering
16. Food Engineering Chem For remaining two courses select any courses
out of 14*
17. Leather Technology Chem For remaining two courses select any courses
out of 14*
18. Marine Engineering Phy, Chem, Math NA
19. Metallurgy Engineering Phy, Chem, Math NA
20. Military Engineering Phy, Chem, Math NA
21. Mining Engineering Phy, Chem, Math NA
22. Nano Technology Phy, Chem, Math NA
23. Nuclear Science and Phy, Chem, Math NA
Technology
24. Packaging Technology Nil Select any courses out of 14*
25. Pharmaceutical Phy, Chem Select any one from Bio / Biotechnology /
Engineering** Maths
26. Printing Engineering** Phy, Chem For remaining single course select any courses
out of 14*
27. Textile Engineering Phy, Chem, Maths NA
28. Fashion Technology Nil Select any courses out of 14*
29. Textile Chemistry Chem For remaining two courses select any courses
out of 14*
------------------------------------------------------------------------------------------------------------------------------------------------
** First one or two Semesters may be so designed that students with Biology / Biotechnology Background have
adequate courses on Maths and Vice Versa and then the class is at level studying field for the rest of the semesters.
* Physics / Mathematics / Chemistry / Computer Science / Electronics / Information Technology / Biology / Informatics
Practices / Biotechnology / Technical Vocational Subject / Agriculture / Engineering Graphics / Business Studies /
Entrepreneurship.
 2024

1. 2024
(i) Online Registration Starting Date : 19.04.2024
(ii) Online Registration Closing Date : 19.05.2024
(iii) Last date of payment through Net Banking / Debit Card / : 21.05.2024
Credit Card / UPI and submission of the Online Application
Form of Registered Candidate .
(iv) Online Editing of Application Form : 23.05.2024 to 25.05.2024
(v) Uploading of Online Admit Card : 28.06.2024
(vi) Proposed Date of Examination : 13.07.2024 14.07.2024

3. bceceboard.bihar.gov.in
4. 0612-2220230