OS 1100

MAPPER®
Color Graphics
Operations
Reference Card

Copyright © 1988 Unisys Corporation

All Rights Reserved
Unisys is a trademark of Unisys Corporation
MAPPER is a registered trademark
of Unisys Corporation

Relative to Release June 1988

Level 34R1
Printed in U S America
Priced Item UP-13020
Creating Charts
CHART run Displays the CHART menu.
CHART [,selection] run Bypasses the CHART menu.
Selection: BARG TEXT
LINEG BAR3D
MIXED TIMEL
PARETO C (Displays chart on screen.)
PIEG E (Displays example charts.)
RADAR G (Loads graphics code.)
SCAT H (Displays help information.)
TARGET P (Sends code to plotter.)

Creating Charts from Existing Reports

GR run Creates chart from existing column-
formatted report.
Options: I Vertical line chart (default)
b Vertical comparative bar chart
h Horizontal line chart
bh Horizontal comparative bar
chart
s Stacked bar chart
f Filled line chart
m Mixed bar and line chart
c Scatter chart
x Pareto chart
P Pie chart
GRID run Creates chart input report from existing
column-formatted report.

Options: blank Line chart (default)

b Comparative bar chart
c Scatter chart
P Pie chart

Managing Charts
MULTI run Arranges 2, 3, or 4 charts on one screen or
plot.

PLOTIT run Plots a chart at a remote terminal.

DISPLAY[selection] run

Selection: NEW Creates index list report

ADD Adds to the list
RUN Displays charts manually
CYC Displays charts automatically
GS (Graphics Scaler) Changes chart size.
Rotates and offsets charts on page or
screen.
Converts expanded syntax into primitive
graphics code.

Displaying Graphics
g - or CHART,C With primitive graphics code displayed.
CHART,C,rid Without primitive graphics code displayed.
g or CHART,C Without a RID displayed.
DSG statement With a run.

Creating Signs
SIGN run
Chart Colors and Patterns

Color Number* Pen Stall**

Black 0 1
Red 1 3
Green 2 4
Yellow 3 5
Blue 4 2
Magenta 5 7
Cyan 6 2
White 7 1
Gray 8 1
Tan 9 5
Aqua 10 8
Lime 11 6
Violet 12 7
Hot pink 13 3
Turquoise 14 8
Pink 15 3

* Use for TEXT chart and graphics code only. To specify a color for
a chart other than a text chart, spell out the color name. For
example, type RED to specify the color red.
**
Actual color plotted.

Pie and Bar Chart Patterns Line Chart Patterns

Patterns Codes Patterns Codes

None (border only) Solid 1

Solid 0 Short dashes 2
45-degree left (\\\\) 1 Dots 3
45-degree right (////) 2 Dashes and dots 4
Vertical 3 Very short dashes 5
Horizontal 4 Medium dashes 6
Vertical and horizontal 5 Long dashes 7
crosshatch Dash and two dots 8
45-degree crosshatch 6 Widely spaced dots 9
Varies by device >6

Scatter Chart Marker Symbols Time Line Milestone Markers

Symbols Codes Markers Codes

Dot (period) 1 MARK 1 Triangle

Plus (+) 2 MARK 2 Square
Asterisk (*) 3 MARK 3 Circle
Circle (0) 4 MARK 4 Diamond
X 5
Varies by device >5
Creating Organization Charts
GOC (Generate Organization Chart) function

Global Parameters

BACKGROUND Sets chart background color.

COLOR Sets screen color (Default = Black).
COLUMNS Displays lowest level as two vertical
columns.
CONFIDENTIAL Adds "CONFIDENTIAL" to upper right
corner.
FONT Sets character font.
HORIZONTAL Displays lowest level horizontally.
IGNORE Ignores $DATA command errors.
LEVEL Defines new level.
PAGE Adds page number to chart.
PLOTTER Outputs result on graphics plotter.
SCOPE Displays result on graphics terminal.
STAGGER Displays lowest level as two horizontal rows.
SUB-LEVEL Defines sublevel.
VERTICAL Displays lowest level vertically.

Data Commands

$APPROVED Adds approval lines in specified position.

$BLANK Adds blank line in data.
$BOX Draws a box around each item.
$BOX-COLOR Draws colored boxes around each item.
$CONFIDENTIAL Adds message regarding confidentiality of
chart.
$DASHED Draws dashed lines for each item.
$DATE Adds date in format M DD, YYYY.
$DATE0 Adds date in format YMMDD.
$DATE1 Adds date in format YYMMDD.
$DATE2 Adds date in format DD MMM
$DATE3 Adds date in format YDDD.
$DATE4 Adds date in format YYDDD.
$DATE5 Adds date in format DDMMYY.
$DATE6 Adds date in format MM/DD/YY.
$DATE7 Adds date in format MONTH DD, YYYY.
$DATE8 Adds date in format MMDDYY.
$DUTIES Adds duties lines to top of chart.
$END Marks end of GOC commands.
$JUSTIFY Justifies text within boxes.
$LEVEL Begins level for following data lines.
$LINE-COLOR Draws colored lines to connect items.
$LOWERCASE Preserves uppercase or lowercase of text.
$MISSION Adds mission lines to top of chart.
$NO-BOX Omits boxes for each item.
$OBJECTIVE Adds objective lines to top of chart.
$PAGE Adds page identifier.
$RESPONSIBILITY Adds responsibilities lines to top of chart.
$SIGNATURE Adds signature lines to specified position.
$SOLID Draws solid lines for each item.
$SUB-LEVEL Begins sublevel for following data lines.
$TITLE Specifies title of chart.
$UPPERCASE Converts all characters to uppercase.

Global Commands

$COMMENT ($COM) Adds comment to GOC command report.

$FILLER ($FILL) Sets character for leading or trailing spaces.
$1NCLUDE ($1NC) Starts logic sequence ($1NCLUDE/$END1).
$ENDI Ends logic sequence of $INCLUDE.
$SET Assigns TRUE or FALSE value for logic
sequence of MISSING text.
Expanded Syntax Commands

ICMn[,qty,rvtrv2,... rvl 0]/ Call macro

10Crl ,r2[,sa,ea]/ Closed ellipse
/.comment string/ Comment
/CA/ Complement rotation angle
/DM [nn][command]V Define macro

/DMKnO,n1,...,n9/ Draw to mark

/ET/ End of text
/GRz,cl,c2,c3/ Generate grid
/0Fri ,r2[,sa,ea]/ Filled ellipse
/PMKnO,n1,...,n91 Generate polygon to mark

10Vrtr2[,sa,ea]/ Hollow ellipse

/ICBx/ Increment background color
/ICFx/ Increment fill color
/ICU/ Increment line color
/ICMx/ Increment marker color

/1Ax.x/ Increment rotation angle

/ISx.x/ Increment scale factor
/ICTx/ Increment text color
/LF[D]/ Line feed down
/LFU/ Line feed up

/MKn/ Mark current position

/AOVx,y,rl,r2,ang/e/ Move to absolute point
/BOVx,y,r1,r2,angle/ Move to relative point
/XSx.x/ Multiply scale factor
/NAx.x/ New rotation angle

/NSx.x/ New scale factor

/PMn/ Position to mark
/RC/ Reset color index
/ST/ Start of text
/TCoxl,nx1[,ox2,nx2,...,oxn,nxn]/ Translate color index
/UL/ Underline text
Primitive Graphics Code Commands

Ax,y Move absolute

Bx,y Move relative
Cx1,y1[,x2,y2,...,xn,yn] Polyline absolute
CFx Set font
CJx,y Set character justification

CP Set character path

CSx Set character space
CTx Set character type
CZx,y Set character size
Dx1,y1[,x2,y2,...,xn,yn] Polyline relative

Exi,Y Polymarker absolute

Fx1,y1 [,x2,y2,...,xn,yn] Polymarker relative
evityi Polygon absolute
Polygon relative
lxy Rectangle

Jx,y Rectangle relative

Kr,sa,ea Sector
LBx Background color
LFx Fill color
LLx Line color

LSx Set line style

LTx Text color
Mr,sa,ea Arc
Or Circle
PEx Set polygon edge style

PHx Set fill area style

Plx Set fill area interior
Pen speed
R Paper size
Sx Set marker type

Slx Set marker color

Wx1,x2,y1,y2 Set viewport
ZAK Activate workstation
ZCx Close workstation
ZDx Deactivate workstation

Zlx Initialize graphics

ZNx Redraw all segments
ZOx Open workstation
ZSx Set deferral state
ZT Terminate graphics