FLANGE HOG 110 ®
Hand Operated
Flange Facing Tool
Recondition RF and FF
flange gasket seat surfaces
with a precise phonograph
finish in minutes!
FLD.005
FLANGE HOG 110® Hand Operated Flange Facer
0.900” I.D. to 14”O.D.
22.86mm I.D. to 355.6mm O.D.
Manually Operated Flange Facing Tool
Delivers Precise Phonographic Finish
On RF and FF Gasket Seats
Key Features
• Manually operated, no electrical, hydraulic, or air lines necessary
• Smooth swing operation produces perfectly precise phonographic finish
• I.D. clamping range of .9” to 10.3” with facing diameter up to 14”
• Accurately mounts to the flange I.D. in seconds
• Feeds available for both smooth and stock finish in accordance with
ASME B16.5 standards Proprietary I.D. clamping components
• Cutting tool has both neutral (straight) and 90 degree tool bit holders ensure quick and accurate fit-up.
• Made of high strength precision machined materials
• Sturdy carry / transport case for managing all components
• Available kits come ready to use
• Strong hardware that is easy to use and makes setup fast
• Saves time and money
• For Sale and Rent
Flange facing made easy with the FLANGE HOG 110® Draw rod wrench and knurled knob give the
The FLANGE HOG 110® is a rugged, compact and ideal for quickly reconditioning tool a comfortable ergonomic feel.
rusty, scarred and worn flange gasket seats to like-new condition in minutes. This
easy to operate flange facing tool is perfect for re-facing RF and FF flanges on
site, in a fabrication/repair shop and it produces a perfectly precise phonographic
finish.
The FLANGE HOG 110® has a clamping range from .9” (22.86mm) to 10.3”
(261.6mm) and can machine flanges with a reach up to 14” (355.6mm) O.D. The
ESCO proprietary clamping system is simple to configure and designed for fast
set-up with accurate alignment.
Cutting bits are double sided, long lasting, and specially formed to cut through
a wide variety of material including carbon steel, stainless steel, alloyed steel, Alignment accuracy is easily achieved by
aluminum and cast iron. ESCOs clamp rib and pad system.
Each tool kit comes ready to use in a sturdy carrying case that keeps everything
conveniently organized and readily accessible.
Whether you are interested in buying or renting, the FLANGE HOG 110® will
provide you with the consistently accurate results and years of trouble free service.
Double sided insert provides long lasting
clean finishes job after job.
esco tool • 75 October Hill Road • Holliston, MA 01746 USA • 1.508.429.4441 • fax 1.508.429.2811 • email: [email protected]
Available for Sale or Rent • www.escotool.com
FLD.005
FLANGE HOG 110® Hand Operated Flange Facer
0.900” I.D. to 14”O.D.
22.86mm I.D. to 355.6mm O.D.
Flange Machining Diameter Range
.9” - 14”
22.9mm - 355.6mm
6.2”
Inside Diameter Clamping Range 157.5mm
.895” - 10.391” 10.7”
271.78mm
22.7mm - 263.9mm 9.3”
236.22mm
Weight Ready-To-Use
15.4 lbs. 1.9”
48.26mm
7 Kg.
12.5”
317.5mm
9.4”
238.8mm
3.1”
78.74mm
5.3”
134.62mm
21.9”
556.26mm
10.9”
276.86mm
N
A
B
C
18.8”
477.5mm M
Clamping Advantage D L
The FLANGE HOG 110® uses one mandrel and two wedges to achieve the full E
clamping range of .9” (22.9mm) to 10.391” (263.9mm). This rugged proprietary F GH
clamping system is simple to set-up and attaches to the flange I.D. with
consistent unmatched accuracy. All components are made of high strength I K
J
precision machined materials for long service.
Large Wedge Small Wedge No Wedge A. Knob H. Insert, 1/4”
Configuration Configuration Configuration
B. Positionnig Knob Handle I. Clamp Pad
C. Housing J. Clamp Rib
D. Feed Shaft K. Actuator
E. Index Nut L. Spring
F. Tool Post Assembly M. Wedge
G. Insert Holder, Straight N. Clamp Release Wrench
esco tool • 75 October Hill Road • Holliston, MA 01746 USA • 1.508.429.4441 • fax 1.508.429.2811 • email:
[email protected] Available for Sale or Rent • www.escotool.com
FLD.005
Precision Pipe and Tube
Beveling, Cutting, and Fabricating Tools
Manufacturer and Market Leader Contact us or your local representative
We Deliver Cutting Edge Innovation to schedule a demo today
ESCO TECHNOLOGIES, INC.
75 October Hill Road • Holliston, MA 01746 USA
1.508.429.4441 • fax 1.508.429.2811
email:
[email protected] Available for Sale or Rent • www.escotool.com
FLD.005
