Network Decoder
Impulse 300D
The Impulse 300D is a dynamic approach to the single channel decoder concept. At its core, the 300D is a versatile
broadcast video processor, capable of receiving content over traditional facility multicast as well as OTT “internet”
sources. The decoder itself offers a large range output ports including SDI, HDMI, and even analog video with RCA
stereo for legacy applications. Offering a solid foundation of broadcast-tier features with support up to 4K/UHD via
HDMI, the 300D is one of our most cross-compatible appliances in the Sencore portfolio. Use as a stand-alone DIY
content delivery or rack-mountable up to three units in 1RU in traditional head-ends.
Key Features
• Support H.265(HEVC), H.264 (MPEG-4), MPEG2 decoding
• Decode signals into 3G-SDI, 2.0 HDMI and CVBS outputs
• Decoding up to UHD/4k resolution on HDMI output and up to FHD resolution on SDI output
• Support of 1 audio PID decoding for MPEG1L2,AAC, AC3 and E-AC3
• Support for all of today’s most common internet delivery protocols, including HLS, SRT, RTMP and Zixi
• Simple and intuitive webUI for configuration and monitoring
• Small form factor - 1/3rd RU wide and 1RU tall
Applications
DECODE & MONITORING
INTERNET DELIVERY
SDI/HDMI/CVBS
Internet
Impulse 300D
UDP/RTP TURNAROUND TO IP
www.sencore.com • +1.605.978.4600
SPECIFICATIONS
OUTPUT INTERFACES MANAGEMENT
SD/HD-SDI/3G-SDI: 1x 75Ω BNC SDI Connector: 1x RJ-45 10/100/1000 Auto Negotiating
SMPTE 259M Protocols: HTTP(S), SNMP
SMPTE 292M User Interfaces: Full control via web GUI
SMPTE 424M Full control via intuitive front panel
Digital Video: 1x HDMI Type A Connector with Automation Interfaces: Full status and control via SNMP*
positive screw retention Configurable SNMP traps *
Supported Version: 2.0 Syslog message logging
Composite Video Output: 1x 75Ω BNC Firmware Updates: Via Web GUI
NTSC, PAL Other I/O: 1 x USB 2.0
Analog Audio: 2x RCA (L/R) 1 x SD Card Standard Interface
LCD x 1, Front button x 6
IP
Physical Interface: 1x RJ45, 10/100/1000 auto-negotiating DIMENSIONS/POWER
Output Format: UDP or RTP Height: 1 RU, 1.72” (44mm)
Width: 1/3 RU, 5.69” (144.5mm)
Constant Bitrate Depth: 7.5” (190.5mm)
IP Encapsulation: 1 to 7 TS Packets per IP Packet Weight: 1.3 lbs (0.6kg)
Protocols: Unicast & Multicast Power: 100-240 VAC 50/60 Hz
IGMP compatibility: Version 1, 2 & 3 Power Consumption: Max. 9W
TS Bitrate: 250 Kbps to 30 Mbps Supplies: 1x AC Internal
Connector: IEC 320 C14
INPUT INTERFACES
IP ENVIRONMENTAL CONDITIONS
Physical Interface: 1x RJ45, 10/100/1000 auto-negotiate Operating Temperature: 32° to 122° F (0° to 50° C)
Output Format: UDP or RTP Cooling: Software regulated fan
Constant Bitrate Storage Temperature: -40° to 149° F (-40° to 65° C)
IP Encapsulation: 1 to 7 TS Packets per IP Packet Relative Operating Humidity: <95% (non-condensing)
Protocols: Unicast & Multicast
HLS ORDERING INFORMATION
SRT IMPULSE-300D Impulse Decoder HDMI/CVBSoutput,
Zixi UDP/RTMP/HLS/SRT inputs, Mpeg2/
RTMP H.264/H.265 video and MPEG1L2/ AAC
IGMP compatibility: Version 1, 2 & 3 audio decoding
TS Bitrate: 250 Kbps to 30 Mbps IMPULSE 30100 SDI output license
Descrambling: AES 128/256 IMPULSE 30200 IP output License
IMPULSE 30300 AC3 License
VIDEO PROCESSING IMPULSE 30500 ZIXI license
Codec/Profile: MPEG-2 up to MP@HL IMPULSE 30600 UHD decoding license
H.264 up to [email protected] (downconversion & HDMI output)
HEVC up to [email protected]
AVS-P16 (AVS+),
AVS2 Main-10bit Profile@ L 8.2.6
Resolutions: [email protected], 24, 25, 29.97, 30, 50, 60
[email protected],24,25, 29.97, 30, 50, 59.94, 60
1080i@25, 29.97, 30
720p@ 50, 59.94, 60
576i@25
480i@ 29.97
Aspect Ratio: Automatic or manual (4:3 or 16:9)
Bitrate: up to 30 Mbps
AUDIO PROCESSING
Codec/Profile: Dolby Digital (AC-3)
Dolby Digital Plus (E-AC-3)
AAC
HE-AAC
MPEG-1 L2
Audio Output Formats: Linear PCM
PCM (down mixed for 5.1 Sources)
Analog (down mixed for 5.1 Sources)
Audio Pass-Through (HDMI output)
Audio Sampling Rate: 48KHz
Number of Services: 1x audio service/PID
Ancillary Data Pass-through: Closed Captions (EIA-608, EIA-708)
www.sencore.com • +1.605.978.4600
