Supplied Calibration
with
certificate
DBM610
Airflow meter
KEY POINTS
●
Measuring range from 40 to 3500 m3/h
● Quick and simple hood changes
● Software for data processing on computer (datalogger 10)
● Sturdy, lightweight and easy to handle
● Removable measuring unit
● Interchangeable hoods
AVAILABLE HOODS
DBM610 airflow meter comes in standard with a 610 x 610 mm hood.
4 others hoods are available as options :
● 1020 x 1020 mm
● 720 x 720 mm
● 720 x 1320 mm
FUNCTIONS
● 420 x 1520 mm ● Simultaneous display of airflow
and temperature
Hoods are airtight and have a transparent part on each side allowing the user to see
● Automatic airflow direction
through the vent and ensure that the hood is in a good position.
The rods, made of fiberglass, provides a good hoods sturdiness. (extraction or air blast)
● Automatic averaging or point by
point averaging
FLOW AREA ● HOLD function
● Removable measuring unit
The flow area is attached to the base and allows the measurement on 48 points, all over the
surface of the flow area. (micromanometer function)
● Data processing on computer with
Measurement is performed using a differential pressure sensor, calibrated and compensated
USB port
in atmospheric pressure and in temperature.
● Different languages available
AUTONOMOUS MICROMANOMETER
Once removed, the measuring unit can be used as a micromanometer :
● With a Pitot tube, it allows measurement of airflow in a duct
● With two silicone tubes, it allows to check filters fouling.
Rugghölzli 2 Tel. +41 (0)56 222 38 18 [email protected]
Produkte, Support und Service CH - 5453 Busslingen Fax +41 (0)56 222 10 12 www.sentronic.com
TECHNICAL FEATURES SUPPLIED WITH
●
AIRFLOW DBM610 airflow meter is supplied with
calibration certificate, hood of 610 x 610
Measuring range From 40 to 3500 m3/h mm sizes and transport case.
Accuracy* 3% of the measurement ±10 m3/h
Resolution 1 m3/h
●
TEMPERATURE (on the base)
Measuring range From 0 to 50°C
Accuracy* 2% of the measurement ±0.1 °C
Resolution 0.1°C
FTang – DBM610 – 20/09/11 – RCS (24) Périgueux 349 282 095 Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice.
●
THERMOCOUPLE TEMPERATURE (on the micromanometer) WARRANTY
Thermocouple type K, J, T, S Instruments have 1-year guarantee for
any manufacturing defect (return to our
Measuring range K : from -200 to 1300°C After-Sales Service required for
J : from -100 to 750°C appraisal).
T : from -200 to 400°C
S : from 0 to 1760°C
Accuracy* K : ±1,1°C or ±0.4% of reading value
J : ±0,8°C or ±0.4% of reading value
T : ±0,5°C or ±0.4% of reading value
S : ±1°C or 0.4% of reading value
Resolution 0.1°C
●
PRESSURE
Measuring range From -2500 to +2500 Pa
Accuracy* ±0.2% of reading ±2Pa
Resolution From 0.001 to 0.1 Pa
*All accuracies indicated in this document were stated in laboratory conditions and can be guaranteed for measurements carried out in the same conditions, or
carried out with required compensation.
GENERAL TECHNICAL FEATURES
Display Large graphic back-lighted LCD
Sizes : 86 x 51 mm
Connectors ABS connectors, Ø 7 x 4 mm
Housing Shock-proof made of ABS, IP54 protection
Keypad 12 keys
Conformity Electromagnetical compatibility (NF EN 61326-1 guideline)
Power supply 4 alkaline batteries LR6
Rechargeable battery Li-ion 3.7 V 4400 mhA (optional)
Environment Neutral gases
Operating temperature From 0 to +60 °C
Storage temperature From -20 to +70 °C
Auto-shut-off Adjustable from 0 to 120 min
Weight 3600 g
Languages French, English
Rugghölzli 2 Tel. +41 (0)56 222 38 18 [email protected]
Produkte, Support und Service CH - 5453 Busslingen Fax +41 (0)56 222 10 12 www.sentronic.com
