11/3/17, 10(52 pm
AUDIO / VIDEO RADIO ANTENNA CORD INSTALLATION
CAUTION / NOTICE / HINT
HINT:
· Use the same procedure for RHD and LHD vehicles.
· The procedure listed below is for LHD vehicles.
PROCEDURE
1.INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY 86101J
a. w/ Digital Audio Broadcasting Antenna
i. Attach the clamps to install the No. 2 antenna cord sub-
assembly.
ii. Connect the connectors.
iii. Attach the guide and install the bolt.
Torque:
8.4 N*m (86 kgf*cm, 74 in.*lbf)
b. w/o Digital Audio Broadcasting Antenna
i. Attach the clamps to install the No. 2 antenna cord sub-
assembly.
ii. Connect the connectors.
2.INSTALL ROOF HEADLINING ASSEMBLY 63310
a. for Single Cab:
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000LJHR.html Page 1 of 4
11/3/17, 10(52 pm
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING(for Single Cab)>INSTALLATION
b. for Smart Cab:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING(for Smart Cab)>INSTALLATION
c. for Double Cab:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING(for Double Cab)>INSTALLATION
3.INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD) 86101
a. w/ Navigation System:
i. Install the antenna cord sub-assembly with the bolt.
Torque:
8.4 N*m (86 kgf*cm, 74 in.*lbf)
ii. Attach the clamps shown in the illustration.
iii. Connect the connector.
b. w/o Navigation System:
i. Install the antenna cord sub-assembly with the bolt.
Torque:
8.4 N*m (86 kgf*cm, 74 in.*lbf)
ii. Attach the clamps shown in the illustration.
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000LJHR.html Page 2 of 4
11/3/17, 10(52 pm
iii. Connect the connector.
4.INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD) 86101
a. w/ Navigation System:
i. Install the antenna cord sub-assembly with the bolt.
Torque:
8.4 N*m (86 kgf*cm, 74 in.*lbf)
ii. Attach the clamps shown in the illustration.
iii. Connect the connector.
b. w/o Navigation System:
i. Install the antenna cord sub-assembly with the bolt.
Torque:
8.4 N*m (86 kgf*cm, 74 in.*lbf)
ii. Attach the clamps shown in the illustration.
iii. Connect the connector.
5.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY 55302A
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000LJHR.html Page 3 of 4
11/3/17, 10(52 pm
Click hereVehicle Interior>INTERIOR PANELS / TRIM>UPPER INSTRUMENT PANEL>INSTALLATION
6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page
General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
7.CHECK SRS WARNING LIGHT
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(for Type B)>DIAGNOSIS SYSTEM
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000LJHR.html Page 4 of 4
