Irrigation Pump Installation Method Statement
Irrigation Pump Installation Method Statement
This document describes the methodology for the Installation of Irrigation pump for the project building
to ensure that all concerned persons are familiar with the sequence of activities, utilization of resources,
and execution of the works in compliance with applicable Safety and Quality Procedures, and Project
Documents and Specification.
This method statement is intended to outline the activities and the methods used for the Installation of
Irrigation pump.
Documents.
agencies.
Mechanical Installation
equivalent metal structure. If the transmission of vibrations can be disturbing, provide vibration-damping
supports between the pump and foundation.
Remove the plugs covering the ports. Align the pump and piping flanges on both side of the pump. Fasten
Check Also
the piping with bolts to the pump; do not force the piping into place. Anchor the pump securely with bolts
to the concrete foundation or metal structure.
Electrical Installation
http://safeworkmethodofstatement.com/irrigation-pump-installation-method-statement/ 1/3
12/15/2017 Irrigation Pump Installation Method Statement
box. Connect the earth (ground) lead. Make sure that the earth
(ground) lead is longer than the phase leads. Connect the phase
or on the service access or discharge path. The construction team will ensure that any such requirements
are documented. The hazards identified will be controlled under the overall Project Safety Plan which is a
Before commencing any works, all employees will attend a site safety induction training to ensure all safety
measures are understood and implemented and to cover specific procedures in case of emergency. If
necessary, practical training exercises will be conducted on escape routes, signage, evacuation and rescue.
Prior to the commencement of work, arrangements will be made for medical facilities and medical
personnel to be available from prompt attention to the injured person. The contractor’s vehicle assigned to
the job site will be used for transporting the injured person to the first aid station and to the nearest
hospital when required.
Advertisement
Check Also
Delivered by FeedBurner
http://safeworkmethodofstatement.com/irrigation-pump-installation-method-statement/ 2/3
12/15/2017 Irrigation Pump Installation Method Statement
Share
METHOD STATEMENT FOR INSTALLATION OF Floating Floor System Installation Method Procedure for Installation of Chilled Water
WATER SUPPLY PUMP (HOT & COLD) Statement Pumps
In "Plumbing Method Statements" In "Civil Method Statements" In "HVAC Method Statements"
Check Also
http://safeworkmethodofstatement.com/irrigation-pump-installation-method-statement/ 3/3