HMC719LP4 / 719LP4E

v04.0610
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz

7 Typical Applications Features

The HMC719LP4(E) is ideal for: Noise Figure: 1.0 dB
Amplifiers - Low Noise - SMT

• Cellular/3G and LTE/WiMAX/4G Gain: 34 dB

• BTS & Infrastructure Output IP3: +39 dBm
• Repeaters and Femtocells Single Supply: +3V to +5V
• Access Points 50 Ohm Matched Input/Output
• Test Equipment & Military

TE
24 Lead 4x4 mm SMT Package: 16 mm2

Functional Diagram General Description

The HMC719LP4(E) is a GaAs PHEMT MMIC
Low Noise Amplifier that is ideal for Cellular/3G and
LTE/WiMAX/4G basestation front-end receivers
LE operating between 1.3 and 2.9 GHz. The amplifier
has been optimized to provide 1.0 dB noise figure,
34 dB gain and +39 dBm output IP3 from a single
supply of +5V. Input and output return losses are
excellent and the LNA requires minimal external
matching and bias decoupling components. The
HMC719LP4(E) shares the same package and pinout
SO
with the HMC718LP3(E) 600 - 1400 MHz LNA. The
HMC719LP4(E) can be biased with +3V to +5V and
features an externally adjustable supply current
which allows the designer to tailor the linearity
performance of the LNA for each application.
B

Electrical Specifications, TA = +25°C, Rbias = 1.5k Ohms*

Vdd = +3V Vdd = +5V
O

Parameter Units
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max.
Frequency Range 1.3 - 2.2 2.2 - 2.9 1.3 - 2.2 2.2 - 2.9 GHz
Gain 27 32 22 26.5 29 35 24 28 dB
Gain Variation Over Temperature 0.02 0.02 0.02 0.02 dB/ °C
Noise Figure 1.0 1.3 1.3 1.6 0.95 1.2 1.25 1.6 dB
Input Return Loss 16 13.5 17.5 16.5 dB
Output Return Loss 10.5 9.5 13.5 11.5 dB
Output Power for 1 dB
12.5 15.5 12.5 15.5 18 21.5 18 21.5 dBm
Compression (P1dB)
Saturated Output Power (Psat) 18 18.5 23 23 dBm
Output Third Order Intercept (IP3) 32 31 39 39 dBm
Total Supply Current (Idd) 187 220 187 220 272 315 272 315 mA

* Rbias resistor sets current, see application circuit herein, Vdd = Vdd1 = Vdd2

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery,
20 Alpha andRoad,
to placeChelmsford,
orders: AnalogMA
Devices,
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayPhone:
result from 978-250-3343 Fax: 978-250-3373 Phone:
its use. Specifications subject to change without notice. No Order781-329-4700
On-line at www.hittite.com
7-1 license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks areApplication
• Order online at www.analog.com
Support:
the property of their Phone: 978-250-3343
respective owners. or [email protected]
Application Support: Phone: 1-800-ANALOG-D
 HMC719LP4 / 719LP4E
v04.0610
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz

Broadband Gain & Return Loss [1] [2] Gain vs. Temperature [1]
7
40 40
S21

Amplifiers - Low Noise - SMT

30

20 35
RESPONSE (dB)

10 Vdd=5V

GAIN (dB)
Vdd=3V
S11
0 30

-10

TE
+25C
-20 25 +85C
-40C
S22
-30

-40 20
0.5 0.8 1.1 1.4 1.7 2 2.3 2.6 2.9 3.2 3.5 1.2 1.5 1.8 2.1 2.4 2.7 3
FREQUENCY (GHz) FREQUENCY (GHz)

Gain vs. Temperature [2]

40
LE Input Return Loss vs. Temperature [1]
0

-5
35
RETURN LOSS (dB)

+25C
-10 +85C
-40C
GAIN (dB)

SO
30 -15

-20
+25C
25 +85C
-40C
-25

20 -30
1.2 1.5 1.8 2.1 2.4 2.7 3 1.2 1.5 1.8 2.1 2.4 2.7 3
FREQUENCY (GHz) FREQUENCY (GHz)
B

Output Return Loss vs. Temperature [1] Reverse Isolation vs. Temperature [1]
O

0 0

+25C +25C
-5 +85C -20 +85C
RETURN LOSS (dB)

-40C -40C
ISOLATION (dB)

-10 -40

-15 -60

-20 -80
1.2 1.5 1.8 2.1 2.4 2.7 3 1.2 1.5 1.8 2.1 2.4 2.7 3
FREQUENCY (GHz) FREQUENCY (GHz)

[1] Vdd = 5V, Rbias = 1.5K [2] Vdd = 3V, Rbias = 1.5K

For price,
Information furnisheddelivery and tois place
by Analog Devices believed orders:
to be accurateHittite Microwave
and reliable. However, Corporation,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
no 20 Alpha
For price, delivery, andRoad, Chelmsford,
to place MA
orders: Analog 01824Inc.,
Devices,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 978-250-3343
rights of third parties that may result from its use. Specifications Fax: 978-250-3373 Phone:
subject to change without notice. No Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com 7-2
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. or [email protected]
Application Support: Phone: 1-800-ANALOG-D
 HMC719LP4 / 719LP4E
v04.0610
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz

7 Noise Figure vs. Temperature [1] [2] P1dB vs. Temperature [1] [2]
2 26
Amplifiers - Low Noise - SMT

1.8 +85C
24
Vdd=5V
Vdd=3V Vdd=5V
1.6
NOISE FIGURE (dB)

22
1.4

P1dB (dBm)
20
+25C
1.2 +85C
18 -40C
1
Vdd=3V
16

TE
0.8
+25C 14
0.6
-40C
0.4 12
1.2 1.5 1.8 2.1 2.4 2.7 3 1.2 1.5 1.8 2.1 2.4 2.7 3
FREQUENCY (GHz) FREQUENCY (GHz)

Psat vs. Temperature [1] [2]

26

24
LE Output IP3 vs. Temperature [1] [2]
50

45
+25C
+85C
Vdd=5V -40C
22
P1dB (dBm)

Vdd=5V 40
IP3 (dBm)

20
SO
18 Vdd=3V
35
Vdd=3V
16
+25C
+85C 30
14 -40C

12 25
1.2 1.5 1.8 2.1 2.4 2.7 3 1.2 1.5 1.8 2.1 2.4 2.7 3
FREQUENCY (GHz) FREQUENCY (GHz)
B

Output IP3 and Idd vs. Output IP3 and Idd vs.
Supply Voltage @ 1700 MHz [3] Supply Voltage @ 2200 MHz [3]
O

45 300 45 300

40 IP3 250 40 IP3 250

35 200 35 200
IP3 (dBm)

IP3 (dBm)
Idd (mA)

Idd (mA)

30 150 30 150

25 100 25 100

20 Idd1 50 20 Idd1 50
Idd2 Idd2

15 0 15 0
2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5 2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5
VOLTAGE SUPPLY (V) VOLTAGE SUPPLY (V)

[1] Vdd = 5V, Rbias = 1.5K [2] Vdd = 3V, Rbias = 1.5K [3] Rbias = 1.5K

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery For price, delivery, andRoad,
to place orders: AnalogMA
Devices,
01824Inc.,
responsibility is assumed by Analogand to for
Devices place
its use, orders: Hittite Microwave
nor for any infringements Corporation,
of patents or other 20 Alpha Chelmsford,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayPhone:
result from 978-250-3343
its use. Specifications subjectFax: 978-250-3373 Phone:
to change without notice. No Order781-329-4700
On-line at www.hittite.com
7-3 license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks areApplication Application
• Order online at www.analog.com
Support: Phone: 1-800-ANALOG-D
Support:
the property of their Phone: 978-250-3343
respective owners. or [email protected]
 HMC719LP4 / 719LP4E
v04.0610
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz

Power Compression @ 1700 MHz [1] Power Compression @ 1700 MHz [2]
7
40 40

Amplifiers - Low Noise - SMT

35 35
Pout (dBm), Gain (dB), PAE (%)

Pout (dBm), Gain (dB), PAE (%)

30 Pout
30
Gain
25 PAE 25 Pout
Gain
20 20 PAE

15 15

10 10

TE
5 5

0 0

-5 -5
-29 -26 -23 -20 -17 -14 -11 -8 -30 -27 -24 -21 -18 -15 -12
INPUT POWER (dBm) INPUT POWER (dBm)

Power Compression @ 2200 MHz [1]

35

30
LE Power Compression @ 2200 MHz [2]
35

30
Pout (dBm), Gain (dB), PAE (%)

Pout (dBm), Gain (dB), PAE (%)

25 25
Pout
Gain
20 PAE 20 Pout
SO
Gain
15 15 PAE

10 10

5 5

0 0

-5 -5
-30 -27 -24 -21 -18 -15 -12 -9 -6 -3 -30 -27 -24 -21 -18 -15 -12 -9
INPUT POWER (dBm) INPUT POWER (dBm)
B

Gain, Power & Noise Figure Gain, Power & Noise Figure
vs. Supply Voltage @ 1700 MHz [3] vs. Supply Voltage @ 2200 MHz [3]
O

45 1.5 45 1.5

40 P1dB NF
1.4 40 P1dB NF
1.4
Gain Gain
Gain (dB) & P1dB (dBm)

Gain (dB) & P1dB (dBm)

35 1.3 35 1.3
NOISE FIGURE (dB)

NOISE FIGURE (dB)

30 1.2 30 1.2

25 1.1 25 1.1

20 1 20 1

15 0.9 15 0.9

10 0.8 10 0.8
2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5 2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5
VOLTAGE SUPPLY (V) VOLTAGE SUPPLY (V)

[1] Vdd = 5V, Rbias = 1.5K [2] Vdd = 3V, Rbias = 1.5K [3] Rbias = 1.5K

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery For price, delivery, andRoad,
to placeChelmsford,
orders: AnalogMA
Devices,
01824Inc.,
responsibility is assumed by Analogand toforplace
Devices orders:
its use, nor Hittite Microwave
for any infringements Corporation,
of patents or other 20 Alpha
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone:
license is granted by implication 978-250-3343
or otherwise Fax:rights
under any patent or patent 978-250-3373
of Analog Devices. Order781-329-4700
Phone: On-line at www.hittite.com
• Order online at www.analog.com 7-4
Trademarks and registered trademarks areApplication Support:
the property of their Phone: 978-250-3343
respective owners. Application Support: Phone: 1-800-ANALOG-D
or [email protected]
 HMC719LP4 / 719LP4E
v04.0610
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz

7 Output IP3 vs. Rbias @ 1900 MHz Gain, Noise Figure & Rbias @ 1900 MHz
40 35 1.8
Amplifiers - Low Noise - SMT

38 33 1.6

NOISE FIGURE (dB)

36 1.4
IP3 (dBm)

31

GAIN (dB)
34 29 Vdd=3V 1.2
Vdd=5V

TE
Vdd=3V
32 Vdd=5V 27 1

30 25 0.8
1 10 100 1000 10000 100 1000 10000
Rbias (Ohms) Rbias (Ohms)

LE
SO
B
O

For price,
Information furnisheddelivery and tois place
by Analog Devices believed orders:
to be accurateHittite Microwave
and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
Corporation, 20 Alpha
For price, delivery, andRoad, Chelmsford,
to place orders: AnalogMA 01824Inc.,
Devices,
rights of third parties that mayPhone:
result from 978-250-3343
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Fax: 978-250-3373 Phone:
its use. Specifications subject to change without notice. No Order781-329-4700
On-line at www.hittite.com
7-5 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. • Order online at www.analog.com
Trademarks and registered trademarks areApplication Support:
the property of their Phone: 978-250-3343
respective owners. or [email protected]
Application Support: Phone: 1-800-ANALOG-D
 HMC719LP4 / 719LP4E
v04.0610
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz

Absolute Bias Resistor

Range & Recommended Bias Resistor Values for Idd
7
Rbias Ω

Amplifiers - Low Noise - SMT

Vdd (V) Idd1 (mA) Idd2 (mA)
Min Max Recommended
1k 27 154
3V 1K [1] Open Circuit 1.5k 33 154
10k 46 154
120 70 168
5V 0 Open Circuit 470 88 168

TE
1.5k 104 168
[1] Operation with Vdd= 3V and Rbias < 1K Ohm may result in the part becoming conditionally stable which is not recommended.

Typical Supply
Absolute Maximum Ratings
Drain Bias Voltage (Vdd)
RF Input Power (RFIN)
(Vdd = +5 Vdc)
5.5 V

-5 dBm
LE Current vs. Vdd (Rbias = 1.5k)
Vdd (V)
2.7
Idd1 (mA)
22
Idd2 (mA)
150
3.0 33 154
Channel Temperature 175 °C
3.3 44 155
Continuous Pdiss (T= 85 °C)
SO
1.9 W 4.5 87 163
(derate 21.2 mW/°C above 85 °C)
5.0 104 168
Thermal Resistance
47.3 °C/W
(channel to ground paddle) 5.5 121 169
Storage Temperature -65 to +150 °C Note: Amplifier will operate over full voltage ranges shown above.
Operating Temperature -40 to +85 °C

ELECTROSTATIC SENSITIVE DEVICE

B

OBSERVE HANDLING PRECAUTIONS

O

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery,
20 Alpha andRoad,
to place orders: Analog
Chelmsford, MADevices,
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 978-250-3343
rights of third parties that may result from its use. Specifications Fax: 978-250-3373 Phone:
subject to change without notice.
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
No Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com 7-6
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. or [email protected]
Application Support: Phone: 1-800-ANALOG-D
 HMC719LP4 / 719LP4E
v04.0610
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz

7 Outline Drawing
Amplifiers - Low Noise - SMT

TE
LE
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
SO
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE
MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR
SUGGESTED LAND PATTERN.
B
O

Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
[1] H719
HMC719LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1
XXXX
[2] H719
HMC719LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery,
20 Alpha andRoad,
to place orders: Analog
Chelmsford, MADevices,
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 978-250-3343
rights of third parties that may result from its use. Specifications Fax: 978-250-3373
subject to change without notice. No Order On-line at www.hittite.com
7-7 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: 781-329-4700 • Order online at www.analog.com
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. or [email protected]
Application Support: Phone: 1-800-ANALOG-D
 HMC719LP4 / 719LP4E
v04.0610
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz

Pin Descriptions
7
Pin Number Function Description Interface Schematic

Amplifiers - Low Noise - SMT

1, 3 - 5, 7 - 16, No connection necessary. These pins may be connected to
N/C
18, 20, 22 RF/DC ground without affecting performance.

This pin is DC coupled

2 RFIN
and matched to 50 Ohms.

TE
This pin is used to set the DC current of the amplifier by
6 RES
selection of external bias resistor. See application circuit.

RF Output and DC BIAS for the second amplifier.

17 RFOUT
See Application Circuit for off-chip components.

19 RFIN2
LE
This pin is DC coupled. An off-chip DC
blocking capacitor is required.
SO
21 RFOUT1 This pin is matched to 50 Ohms.

Power Supply Voltage for the first amplifier. External bypass

23, 24 Vdd1, 2
capacitors are required. See application circuit.
B
O

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to for
place For price, delivery, andRoad,
to place orders: Analog Devices,
01824Inc.,
responsibility is assumed by Analog Devices its use, orders: Hittite Microwave
nor for any infringements Corporation,
of patents or other 20 Alpha Chelmsford, MA
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 978-250-3343
rights of third parties that may result from its use. Specifications Fax: 978-250-3373 Phone:
subject to change without notice.
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
No Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com 7-8
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. Application Support: Phone: 1-800-ANALOG-D
or [email protected]
 HMC719LP4 / 719LP4E
v04.0610
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz

7 Application Circuit
Amplifiers - Low Noise - SMT

TE
LE
SO
B
O

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery,
20 Alpha andRoad,
to place orders: Analog
Chelmsford, MADevices,
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 978-250-3343
rights of third parties that may result from its use. Specifications Fax: 978-250-3373
subject to change without notice. No Order On-line at www.hittite.com
7-9 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: 781-329-4700 • Order online at www.analog.com
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. or [email protected]
Application Support: Phone: 1-800-ANALOG-D
 HMC719LP4 / 719LP4E
v04.0610
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz

Evaluation PCB
7

Amplifiers - Low Noise - SMT

TE
LE
SO

List of Materials for Evaluation PCB 121242 [1]

B

Item Description The circuit board used in this application should use
J1 - J3 PCB Mount SMA Connector RF circuit design techniques. Signal lines should
J4 - J5 2mm Vertical Molex Connector have 50 Ohm impedance while the package ground
O

C1, C8, C12 220 pF Capacitor, 0402 Pkg. leads and exposed paddle should be connected
C3 10 nF Capacitor, 0402 Pkg. directly to the ground plane similar to that shown.
C4, C7, C11 10 nF Capacitor, 0603 Pkg.
A sufficient number of via holes should be used to
C5, C6, C13 1000 pF Capacitor, 0603 Pkg.
connect the top and bottom ground planes. The
C10 4.7 uF Capacitor, 0805 Pkg.
evaluation board should be mounted to an appro-
L2 22 nH Inductor, 0402 Pkg.
priate heat sink. The evaluation circuit board shown
L3 6.8 nH Inductor, 0603 Pkg.
is available from Hittite upon request.
L4 47 nH Inductor, 0603 Pkg.
R1 1.5 kOhm Rbias Resistor, 0402 Pkg.
R2, R3 0 Ohm Resistor, 0402 Pkg.
U1 HMC719LP4(E) Amplifier
PCB [2] 121126 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25RF

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: Hittite Microwave Corporation, For price, 20
delivery,
Alpha and to place
Road, orders: Analog
Chelmsford, MADevices,
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 978-250-3343
rights of third parties that may result from its use. Specifications Fax: 978-250-3373
subject to change without notice.
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
No Order On-line at www.hittite.com
Phone: 781-329-4700 • Order online at www.analog.com 7 - 10
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. or [email protected]
Application Support: Phone: 1-800-ANALOG-D