1Home Server Datasheet
1Home Server is the
modern brain of a KNX
smart home system.
Visualization Local first Remote access*
Server enables a fully 1Home Server is For a remote
local integration with configured completely configuration, the
Apple Home, Google locally via an 1Home Server can be
Home, Samsung embedded web paired with 1Home
SmartThings, Home interface (with an Remote Dashboard
Assistant and other exception of ETS auto (remote.1home.io)
smart home apps and detection). The device where the customer or
voice control runs local first and will the integrator can
interfaces via the run uninterrupted even access the device
industry standard if the internet remotely.
protocol Matter. connection is lost.
Automatic ETS device detection*
Automatic ETS device detection saves time importing your KNX configuration, without
the need to type hundreds of group addresses and devices by hand.
Automatic issue Logic module IoT integrations
detection
Runs simple or Integrates 100s of IoT
Detects configuration complex automations devices via Matter as if
issues and saves you through an easy to use they would be one with
time troubleshooting. interface (coming in Q1 KNX (coming in Q1
2024). 2024).
*This feature requires an active internet connection
Installation instructions
To get started or learn more about the device, visit 1Home Server documentation.
Documentation: https://www.1home.io/docs
Technical specifications
Hardware Mechanical data Power supply
- Processor: Broadcom - Housing - External power supply:
BCM2711 quad-core ▪ Material: Plastic (PPO) 12...30 VDC / alternative;
Cortex-A72 (ARM v8) ▪ UL94 class: V0 DC barrel power supply
64-bit, up to 1.5 GHz - Mounting: DIN (EN 60715) (12 VDC, 1 A)
- Memory: 1 GB LPDDR4 rail, width: 4M (72 mm) - Power consumption
- Storage: on-board 8 GB - Weight: approx. 150 g ▪ Typical: 2-3 W @30 VDC
eMMC (4 GB usable for ▪ Max: 5 W @30 VDC
user storage)
Controls and indicators KNX Environmental
requirements
- RGB multi-color status LED - Medium: Twisted Pair
- Multifunctional mono-color (KNX TP1−256) - Ambient temp. operating:
red LED - Interface protocol: cEMI -5...+45°C
- Multifunctional button - Rel. humidity
- Reset button (non-condensing): 5...93%
Network Connectivity Connectors CE marking according to
- Gigabit Ethernet LAN - KNX TP Bus connector - EMC directive 2014 / 30 /
(1 Gbit/s) (Red / Black) EU
- IEEE 802.3: 1000BASE-T, - Power - RoHS directive 2011 / 65 /
100BASE-TX, 10BASE-T ▪ AUX connector (Yellow EU
- IPv4 & IPv6 support / White) for external - EN 55014-1:2017
- Supported network power supply , or; - EN 61000-4-2:2009
protocols ARP, ICMP, ▪ DC barrel socket - EN 61000-4-3:2006 +
ICMPv6, IGMP, UDP/IP, - Ethernet LAN RJ45 socket A1:2008 + A2:2010
TCP/IP, DHCP, NTP, mDNS, - EN 61000-4-4:2012
DNS-SD, HTTP - EN 61000-4-5:2014
- Up to 4 KNXnet/IP - EN 61000-4-6:2014
Tunneling connections
simultaneously
Packaging specifications
EAN: 3830073770107 WEEE number: DE48929946
Packaging dimensions: Included in the box:
- Product: 12.5 × 13 × 7 cm - 1Home Server
- Transport: 13 × 13.5 × 7.5 cm - Welcome card
- Device label (serial No., default credentials, Matter pairing code)
- Power supply and network cable not included!
