Oracle 1z0-539

1z0-539 Oracle GoldenGate 10 Essentials

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ

/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
QUESTION NO: 1

Which statements are true of goldenGate password encryption?

A password can be encrypted and pasted into a parameter file.

An encrypted password can be generated using the default key.
An encrypted password can be generated using a user defined-key.

A. 1 only
B. 2 only
C. 3 only
D. 1 and 3
E. 1, 2 and 3

Answer: E

Explanation:
One of the encryption options that GoldenGate provides is to use Passwords in the extract and
replicate parameter file. Also, the encrypted password can be generated using user defined key up
to 128-bit or using the default key.

Reference:
http://gavinsoorma.com/2010/07/goldengate-encrypting-data-and-passwords/

QUESTION NO: 2

You want to configure replication of CREATE TABLE statements from oracle to Teradata, so that
only new table created in your mapped source schema is Replicated. Which should be the part of
solution?

A. This feature is not supported in oracle goldenGate 10.

B. DDL INCLUDE MAPPED in extra parameter file.
C. DDL INCLUDE UNMAPPED in extra parameter file.
D. DDL EXCLUDE MAPPED in extra parameter file.

Answer: B

Explanation:
DDL INCLUDE MAPPED in extra parameter file. This means that DDL support is now enabled for
all tables which have been mapped

Reference :
`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
http://gjilevski.wordpress.com/2010/02/19/configuring-ddl-synchronization-with-oracle-goldengate/
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
2
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
QUESTION NO: 3

Which translations are captured if you ADD EXTRACT BEGIN now 1:00 p.m., but START
EXTRACT at 2:00 p.m.?

A. Transactions started on or after 1:00 p.m.

B. Transactions started on or after 2:00 p.m.
C. Transactions started before 1:00 p.m and committed after 1:00 p.m.
D. Transactions started before 1:00 p.m and committed after 2:00 p.m.

Answer: D

Explanation:
The START EXTRACT starts the Extract and Data Pump processes.
Reference:
http://www.pythian.com/news/7959/oracle-goldengate-installation-part-1/

QUESTION NO: 4

You want encrypt message sent or over TCP/IP to server usserver1, where the goldenGate
manage process is running on port 7809. Your requirements include using a custom encryption
key and advanced encryption standard (AES), and you have created an ENCKEYS file
What parameters should you use?

A. This feature is not supported in oracle goldenGate 10.

B. RMTHOST usserval, MGRPORT 7809, ENCRYPT AES, ENCRYPT KEY
C. RMTHOST usserval, MGRPORT AES, ENCRYPTKEY MYKWY, MBRPORT 7809
D. RMTHOST usserval, MGRPORT 7809, ENCRYPT BLOWFISH ENCRYPTKEY MYKEY

Answer: D

Explanation:
Reference :
http://gavinsoorma.com/2010/07/goldengate-encrypting-data-and-passwords/

QUESTION NO: 5

Which three describe a valid OGG Event Action?

A. Stop the process

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
3
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
B. Write a checkpoint before and/or after writing the record to the trail.
C. Run a shell command
D. Purge old trail files

Answer: A,B,C

Explanation:
References :
http://gavinsoorma.com/2010/07/useful-goldengate-commands-shell-obey-help-historyversions/

QUESTION NO: 6 CORRECT TEXT

By default, which option is evaluated first, SQLEXEC or filter statement?

A) SQLEXEC
B) FILTER
C) There is no default; it is set with the after filter I before filter.
D) It depends on their position in the parameter file; the first encountered is executed first.

Answer: B)

QUESTION NO: 7

Which argument is used to set the maximum size of the EXTTRAIL or RMTTRAL.

A. MAXSIZE
B. TRAILSIZE
C. HAXTRAILSI2E
D. TRAILMAXSIZE F
E. MEGABYTES

Answer: E

Explanation:
http://jianmingli.com/wp/?p=1534

QUESTION NO: 8

Which Manager Parameter sets will report current lag every hour and write a critical message for
any Extract/Replicate with a lag over 60 minutes?

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
4
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
A. LAGBEPOBTHOURS 1, LAGINFO 1 and LAGCRITICAL 60
B. LAGREPORTMINUTES 60, LAGINFOHOURS 1
C. LAGREPOBT 1, I.AGCRITICALHOURS 1
D. LAGREPOBTHOURS 1, LAGINFOMINUTES 30, LAGCR JTTCAI-M I

Answer: B

Explanation:
Reference :
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 9

What parameter provides options for compression and encryption?

A. RMTHOST
B. TARGET
C. TCPIP
D. TARGET DB

Answer: A

Explanation:
Reference :
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 10

What GoldenGate process is responsible for capturing changes in the source database?

A. Manager
B. Replicate
C. Extract
D. Server Collector

Answer: C

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
5
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
QUESTION NO: 11

You have configured and added the extract and Replicate tasks using the direct load method what
do you need to do to get the processes up and running?

A. Start the Extract task.

B. Start the Extract task and then start the Replicat task.
C. Start the Extract task; wait for it to stop and than start the Replicate task.
D. Start the Replicate task

Answer: B

Explanation:
Reference:
http://gavinsoorma.com/2010/02/oracle-goldengate-tutorial-6-configuring-data-pump-process/

QUESTION NO: 12

You are configuring replication between two Oracle tables with the same number of columns,
column table names, and data types, but in different orders. For replication purpose can you treat
these as identical tables?

A. No
B. Yes, if the source and target Oracle versions and character sets are the same.
C. Yes
D. Yes, as long as the source table has a primary key define

Answer: D

QUESTION NO: 13

What us expected behavior of CHEKPARMS parameter?

A. The process checks the parameter syntax and then starts running.
B. The process checks the parameter syntax and then stops.
C. A report file is created listing all missing parameters.
D. A report file is created listing all default values not specified in the parameter file.

Answer: A

Explanation:
Reference:
http://jianmingli.com/wp/?p=1537
`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
6
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
QUESTION NO: 14

What GoldenGate facility allows for custom processing in response to a data value?

A. DDLGEN
B. GGSExec
C. User Exits
D. User Tokens

Answer: C

Explanation:
Reference :
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 15

How do you control the size of the buffer that contains data extracted from an ASM instance?

A. TRANLOGOPTIONS ASMBUFSIZ
B. DBOPTIONS ASMBUFSIZE
C. TRANLOGOPTIONS BUFSIZE
D. DBOPTIONS BUFSIZE

Answer: A

Explanation:
Reference :
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 16

How do you control the size of the buffer that contains data extracted from?

A. TRANLOGOPTIONS ASMBUFSIZE
B. DBOPTIONS ASMBUFSIZE
C. TRANLOGOPTIONS BUFSIZE
D. DBOPTIONS BUFSIZE

Answer: C

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
7
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
Explanation:
Reference :
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 17

What three are valid responsibilities of the OGG Manager?

A. Cleaning up GoldenGate trails.

B. Starting dynamic processes, such as Server Collectors, extracts, replicates.
C. Error and lag reporting.
D. Communicating with other GoldenGate Manager processes

Answer: A,B,C

Explanation:
Reference:
http://gavinsoorma.com/2010/02/goldengate-tutorial-3-configuring-the-manager-process/
http://space.itpub.net/10248702/viewspace-624577

QUESTION NO: 18

You have implemented multi-master Oracle/Oracle replication without a provision to exclude

transactions committed by a Replicat process. What errors are likely to occur?

A. Inserts will generate a primary key uniqueness violation; deletes will generate a 'no matching
row' not found error; updates will continue forever.
B. None: loop detection is on by default in Oracle.
C. New inserts will be processed without issue; updates and deletes will generate a "row not
found" error.
D. Updates and deletes will be replicated without issue new inserts will generate a primary key
uniqueness violation.

Answer: B

QUESTION NO: 19

What three types of information are reported in discard file?

A. The details of the discarded records

B. The database error message
`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
8
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
C. The trial file sequence number
D. Runtime statistics

Answer: A,B,C

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_troubleshooting_v104.pdf

QUESTION NO: 20

Which command forces a running Extract to close the current trial and start writing to the next trial
sequence number?

A. ALTER EXTTRAIL <trail name>, NEXTSEQNO

B. ALTER EXTTRAIL <trail name>, ROLLOVER
C. SEND EXTRACT <group>, ETROLLOVER
D. SEND EXTRACT <group>, ROLLOVER

Answer: D

Explanation:
Reference :
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 21

To meet a business requirement for latency, Carlos wants to break long-running source
transactions into shorter commits on the target database with the replicate parameter
MAXTRANSOPS what is the most important thing Carlos should consider before using
MAXTRANSOPS

A. Will business logic be lost if transaction boundaries are changed?

B. Will a large number of small commits perform better than a smaller number of large commits?
C. Will redo buffer size on the target database be adequate for the commit size?
D. Will the sequence of operations be affected by changing transaction boundaries?

Answer: B

Explanation:
Reference :
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
9
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
QUESTION NO: 22

In GoldenGate terms, what is the definition of Extract lag?

A. The difference in time between when a change is made to source data and when that change is
reflected in the target data.
B. The difference in time between the current times at the target system.
C. The difference in time between when a change record is received at the target system and
when the change is reflected in the target data.
D. The difference in time between when a change record is processed by the extract and the
timestamp of the record in the data source.

Answer: D

Explanation:
Reference :
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 23

Which OGG process (es) can change data in database?

A. Replicat only
B. Extract only
C. Extract and Replicat
D. Extract, Replicat and Manager

Answer: C

Explanation:
Reference :
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 24

You have a source installation of OGG l0 that includes an initial extract and datapump to provide a
remote trail formatted for a GoldenGate 9.5 Replicat process to consume, which process should
be use to convert the data to the earlier format?

A. From the first Extract process

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
10
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
B. From the Data Pump process
C. From replicate process
D. This feature is not supported in GoldenGate 10.

Answer: A

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_upgrade_v104.pdf

QUESTION NO: 25

You are responsible for replication between your central office and twelve regional nodes. What is
the best product for you to use to actively monitor thirteen GoldenGate TDM instances and
configure email alerts based on process status?

A. Oracle GoldenGate Director

B. Oracle GoldenGate Transactional Data Management
C. Oracle GoldenGate veridata
D. Oracle GoldenGate Monitor

Answer: A

Explanation:
http://surveycenter.tsainc.com/pdfs/GGateDirector_DataSheet.pdf

QUESTION NO: 26

Which GGSCI command(s) show all available information on both read and write checkpoint for an
Extract?

Example: 1 INFO EXTRACT <group name>

Example: 2 INFO EXTRACT <group name>, DETAIL
Example: 3 INFO EXTRACT <group name>, SHOWCH

A. Example 2 only
B. Example 3 only
C. Examples 1 and 3
D. Examples 1 and 2

Answer: B

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
11
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
Explanation:
Reference :
http://jianmingli.com/wp/?p=1532

QUESTION NO: 27

How would you specify the data source for a secondary Extract functioning as a data pump?

A. EXTTRAILSOURCE
B. SOURCEISTABLE
C. SOURCEISTRAIL
D. LOCTRAILSOURC

Answer: C

QUESTION NO: 28

In order to add delete Replicat processes without specifying a checkpoint table, Gerald has edited
the GLOBALS parameter file. To get the change to take effect, Gerald exits from the GGSCI
command line, but GGSCI fails to restart. Which solution Is most likely to solve Gerald's problem

A. Use a text editor to check the GLOBALS file for syntax errors and fix them
B. Use the cleanup replicat command
C. Verify that Oracle environment variables are set correctly
D. Add the Oracle GoldenGate Installation directory to the system PATH

Answer: A

QUESTION NO: 29

Where can you find a list of the parameters being used by a Replicat process?

A. System logs
B. Discard file
C. Event log
D. Process report

Answer: D

Explanation:
http://gjilevski.wordpress.com/2010/02/27/monitoring-processes-and-processing-status-in-oracle-
goldengate/ `ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
12
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
QUESTION NO: 30

Which process (es) maintain a checkpoint file?

A. Extract only
B. Replicat only
C. Both Extract and Replicat
D. Server collector

Answer: C

Explanation:
Reference:
http://dbmentors.blogspot.com/2010/12/oracle-goldengate-tutorial-part-1.html

QUESTION NO: 31

In addition to using the parameter comment to enter remarks in parameter file(s) can be used?

A. - -
B. //
C. \\
D. /*

Answer: A

QUESTION NO: 32

Which three can GoldenGate encrypt?

A. Extract to Server messages

B. Trails
C. Passwords
D. Redo logs

Answer: A,B,C

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
13
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
QUESTION NO: 33

Which parameter tells Extract the tables for which to capture changes?

A. Table
B. LOGTABLE
C. MAP C
D. LOG

Answer: A

Explanation:
Reference:
http://jianmingli.com/wp/?p=1532

QUESTION NO: 34

Where are GoldenGate macros defined?

A. Macros can be defined in the parameter file or included in a macro file

B. Macros are defined in the GLOBALS parameter file
C. Macros are placed in a file and referenced using an environment variable.
D. Macros are declared, compiled and referenced via Golden Gate's user exits.

Answer: A

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_nsk_admin_v10.pdf

QUESTION NO: 35

If your system has a firewall controlling port access which parameter can be used to control ports
used for GoldenGate processes?

A. CHILDPORTS
B. ALLOWEDPORTS
C. DYNAMICPORTLIST
D. GETPORTINFO

Answer: C

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
14
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
QUESTION NO: 36

Which statement best describes the record Image that an Extract process stores in the
GoldenGate trail by default?

A. The new value for updated fields; the primary key for deleted rows; the after-Image for inserts
B. An image of the contents of the record after the insert, update or delete operation
C. An after image for inserts and a before image for updates and deletes
D. An after image for Inserts and updates and a before image for deletes

Answer: C

QUESTION NO: 37

When GoldenGate is configured for Archived Only Mode (ALO), what must be considered
configuring the middle-tier server for Capture?

A. The middle-tier capture server has the same endian order and bit width
B. The middle-tier server must have a database installed on it
C. GoldenGate only supports Windows or Linux on the middle-tier server
D. GoldenGate only supports UNIX on the middle-tier server

Answer: B

QUESTION NO: 38

You are configuring a multi-master DDL replication environment. To prevent looping of DDL
statement like CREATE TABLE (....), the best solution is______.

A. Include the tranlogoptions (exclude user) parameter in each Extract parameter file
B. Use the add FILTERTABLE command at the GGSCI prompt
C. Use DDL exclude OPTYPE (create table. . . ) in one Extract to prevent looping
D. This feature is not supported in GoldenGate 10.

Answer: C

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 39
`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
15
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
You have source table with PRODUCT-ID column and target table with
PRODUCT_DESCRIPTION. On the target database is a lookup table containing product codes
and corresponding description. What is good way for you to lookup the product description for
each transaction?

A. SQLEXEC ( )
B. DBLOOKUP ( )
C. DBLOGIN ()
D. SQLLOOKUP ( )

Answer: A

QUESTION NO: 40

How many Extracts can write to the same GoldGate trail?

A. Only one
B. Up to 10
C. Up to 50
D. Unlimited

Answer: A

Explanation:
http://jianmingli.com/wp/?p=1534

QUESTION NO: 41

Which utility is responsible for generating source data definitions files?

A. EMSCLNT
B. COBGEN
C. DDLGEN
D. DEFGEN

Answer: D

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
16
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
QUESTION NO: 42

Which statement correctly describes GoldenGate Extract and Replicat process reports?

A. By default process reports are named for the Extract or Replicat group and up to 99 old reports
can be saved depending on the REPORTUM parameter.
B. By default process reports are named for the Extract or Replicat group and up to 10 old reports
are kept.
C. Process reports take the name set by the optional report parameter of the ADD extract replicat
command and up to 99 old reports can be saved depending on the REPORTNUM parameter.
D. Process reports take the name set by the required report file parameters and up to 10 old
reports will be saved.

Answer: D

Explanation:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 43

Which statements are true for a two-node, active-active OGG replication configuration?
Both databases may be live and processing transactions.The two databases must be
homogeneous.Low latency reduces the risk of conflicts.

A. 1 and 2
B. 2 and 3
C. 1 and 3
D. I, 2, and 3

Answer: B

Explanation:
Reference:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:2812197300346109609

QUESTION NO: 44

What is GGSCI an acronym for?

A. GoldenGate secure command interface

B. GoldenGate software command interface
C. GoldenGate software connection interface

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
17
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
D. GoldenGate secure connection interface

Answer: B

Explanation:
Reference:
http://gavinsoorma.com/tag/ggsci/

QUESTION NO: 45

You have a requirement to extract changes from an oracle 10g database without installing or
running any GoldenGate processes on the host server. To accomplish this, which GoldenGate
process parameter is most likely to be part of your solution?

A. TRANLOGOPTIONS ARCHIVEDLOGONLY
B. WILDCARDRESOLVE DYNAMIC
C. This configuration is not supported in GoldenGate 10.
D. ASSUMETARGETDEFS

Answer: A

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 46

Where is user token data stored?

A. Trail file
B. Parameter file
C. Discord file
D. Report file

Answer: A

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 47
`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
18
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
What command is issued to alter Replicat to start processing trail number 10 at relative byte
address 100345?

A. Alter <group>, extseqno 10, extrba 100345

B. Alter Replicat *, exttrail <trail prefix>, extseqno 10, extrba 100345
C. Alter Replicat <group>, sequence lO, rba 100345
D. Alter <group>, sequence 10, rba 100345

Answer: A

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 48

Neither your source, nor your target table has a primary key, and you have not designated
KEYCOLS. How will the Replicat proceed to identify matching target rows to update or delete?

A. The first unique key alpha-numerically, excluding virtual columns and nullable columns, will be
treated as the primary key.
B. This configuration is not supported by GoldenGate; Replicat will abend on updates or deletes.
C. The first column, excluding virtual columns and nullable columns, will be treated as the pr key.
D. The combination of all fields up to the first thirty-two will be treated as a compound primary key

Answer: A

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_syb_inst_v104.pdf

QUESTION NO: 49

Which best describes the function of OGG user tokens?

A. User-defined variables
B. Security tokens
C. User privileges
D. User-defined functions

Answer: A

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
19
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
QUESTION NO: 50

What could you use to formal 123456789 to format of social security number 123-456-789?

A. @STRCAT ()
B. @STEXT ()
C. @strext () and @strcat ()
D. @STRFIND ( )

Answer: C

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 51

Replicat is responsible for which three options?

A. Reading data out of the GoldenGate trails.

B. Performing data flow filtering.
C. Performing data transformations.
D. Check pointing the oldest uncommitted transaction.

Answer: A,B,C

QUESTION NO: 52

What GoldenGate process writes to RMTTRAILS?

A. Server/Collector
B. Extract
C. Pump
D. Replicat
E. All of the above

Answer: B

Explanation:
Reference:
http://hi.baidu.com/nich4/blog/item/19a3e81cad1ff7bb4bedbc50.html

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
20
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
QUESTION NO: 53

How does Replicat know the structure of the source tables when the target has a different layout?

A. GoldenGate trail file contains the metadata of incoming data

B. Replicat uses an ODBC connection to connect to the source system tables
C. Parameter file contains table layouts
D. Discard file contains table layouts
E. Source Definitions file contains table layouts

Answer: E

Explanation:
Reference:
http://gavinsoorma.com/2010/02/oracle-goldengate-tutorial-8-filtering-and-mapping-data/

QUESTION NO: 54

What is the default threshold for message compression in OGG?

A. 1000
B. 100
C. O
D. By default, messages are not compressed.

Answer: A

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 55

What is the name and the location of the file that lists the key values used by extract for
encryptions and Server Collector for decryption?

A. KEYGEN file in the GoldenGate data location

B. COBGEN file in the GoldenGate installation location
C. GGSKEY file in the GoldenGate data location
D. GGSKEY file in the GoldenGate installation location
E. ENCKEYS file in the GoldenGate installation location

Answer: E
`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
21
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 56

By default which type of operations are captured by extract?

A. Inserts, updates, deletes, and table operations such as CREATE TABLE

B. Inserts, compresses, and updates
C. Inserts, updates, deletes, and table operations such as ADD COLUMN
D. Inserts only
E. Inserts, updates, and deletes

Answer: E

Explanation:
Reference:
http://www.labo-oracle.com/Presentation-of-Oracle-GoldenGate

QUESTION NO: 57

Which three are types of encryption supported by OGG?

A. Parameter file encryption

B. Password
C. Trial file encryption
D. Message encryption

Answer: A,B,C

QUESTION NO: 58

Which three are required to correctly configure an OGG?

A. A maximum file size

B. An extract process
C. A trailfile identifier
D. Designation as local or remote

Answer: B,C,D
`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
22
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
Explanation:
Reference:
http://www.biblogs.com/2010/03/22/configuring-odi-10136-to-use-oracle-golden-gate-for-changed-
data-capture/
http://www.pythian.com/news/7959/oracle-goldengate-installation-part-1/

QUESTION NO: 59

What process is the recommended method to purge old GoldenGate trials?

A. Extract r
B. Replicat
C. Manager
D. Manager and Replica

Answer: C

Explanation:
Reference:
http://forums.oracle.com/forums/thread.jspa?messageID=9297810

QUESTION NO: 60

Which statement correctly explains when you would use ASSUMETARGETDEFS?

A. The target tables are already created.

B. Only the fields in the target tables are mapped.
C. The source and target tables have identical data structure.
D. You have specified wildcards in either the TABLE or MAP parameters

Answer: C

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 61

If multiple GoldenGate processes are accessing a set of trial files which of the processes should
include the PURGEOLDEXTRACTS parameter to trigger trail file clean up?

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
23
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
A. Manager
B. Extract
C. Replicat
D. Both Extract and Replicat

Answer: D

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 62

Which parameter could you use to start an Extract when Manager starts?

A. START
B. BEGIN
C. AUTOSTART
D. PROCESS

Answer: C

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 63

Which could be used to map a value stored in a user token to a target column?

A. @GETENV
B. GGHEADER
C. GGENVIRONMENT
D. ©TOKEN

Answer: D

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
24
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
QUESTION NO: 64

Ideally which process should be configured purge old trial files?

A. Manager
B. Extract
C. Replicat
D. Pump

Answer: A

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 65

When would you use the PASSTHRU parameter?

A. When using a data pump to distribute all of the trail data "as is" to a remote system.
B. When Extract is processing database transaction logs where you have a remote database
connection.
C. For a SPECIALRUN one-time processing task that is doing an initial load.
D. When Extract is processing database transaction logs and writing to a local trial that will be
read by a local Replicat.

Answer: A

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 66

Which three types of information are stored in the GoldenGate trial header?

A. Before or after image indicator

B. Data type (e.g. integer, alphanumeric)
C. Relative byte address of the commit record
D. Time of the transaction

Answer: A,B,C

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
25
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 67

What Oracle GoldenGate feature provides recoverability without loss of transactions?

A. Checkpointing
B. Sub-second latency
C. Two-phase commits
D. Transactional integrity

Answer: A

QUESTION NO: 68

Nicole is preparing initial data load Extract task EINI_HR using the parameter DBOPTIONS
FECHBATCHSIZE 2000. What is likely to happen if one of her source tables includes LOB data?

A. The Extract will revert to single-row fetch mode, and then resume array fetches afterwards.
B. The Extract will revert to single-row fetch mode for all tables.
C. The Extract will abend unless LOBMEMORY is increased.
D. The Extract will perform poorly due to paging unless LOBMEMORY is increased.

Answer: A

QUESTION NO: 69

What file must be configured in order to use custom encryption keys?

A. ENCKEYS
B. ENCRYPT
C. GLOBALS
D. CUSTKEYS

Answer: A

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf
`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
26
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
QUESTION NO: 70

Which parameters) would be used for one-time initial replicat?

A. PASSTHRU
B. SOURCEISFILE
C. CHECKMINUTES
D. SOURCEISTABLE
E. SPECIALRUN

Answer: E

Explanation:
Reference:
http://download.oracle.com/docs/cd/E15881_01/doc.104/gg_wux_ref_v104.pdf

QUESTION NO: 71

What is the default format for a GoldenGate trail?

A. ASCII:ASCII format
B. INPUT ASCII: from 1to 127 representing ASCII characters
C. SQL: SQL statements
D. CDF: Canonical Data format
E. XML: XML statement

Answer: A

QUESTION NO: 72

You have discovered that an OGG checkpoint table has become corrupted. What is you best
strategy to recover From this?

A. Use the CONVCHK utility on the target to restore the checkpoint table from checkpoint files.
B. Restore the target DB from backup, reposition the Extract to a point prior to the corruption, Turn
to HANDLECOLLISIONS in the Replicat.
C. Use NODECHECKPONT to cause Replicat to use the checkpoint files as backup and
regenerate the checkpoint table.
D. Use the GENCHK utility on the source to restore the checkpoint table from checkpoint files.

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
27
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓
Answer: A

Explanation:
Reference:
http://www.outofboundstechnology.com/files/oracle/oraclegg_part3_trouble.pdf

`ˆÌi`ÊÜˆÌ ÊÌ iÊ`i“œÊÛiÀȜ˜ÊœvÊ
˜vˆÝÊ*ÀœÊ* Ê `ˆÌœÀÊ
28
/œÊÀi“œÛiÊÌ ˆÃʘœÌˆVi]ÊۈÈÌ\Ê
ÜÜÜ°ˆVi˜ˆ°Vœ“É՘œVŽ° ̓