Valves Program

CL-RS-0001GB-04.02/GP

CENTERLINE
Butterfly Valves Series VIA/RS

Valves Program

CENTERLINE Butterfly Valves Series VIA/RS

The preferred Industrial Valves for Critical Applications and Processes
Areas of application: CENTERLINE Butterfly Valves Series VIA/RS are reliable, maintenance-free shutoff and control valves with permanently gas-tight seal. This valve has proved itself as a leakage-free and corrosion-resistant valve in various applications under most difficult operating conditions. The safety and reliability of a valve is especially important when used for aggressive media all components within the CENTERLINE Butterfly Valves Series VIA/RS have been designed accordingly. Product features: s Concentric design s Soft seat design s No pins needed to attach the disc to the shaft, only 2 parts in contact with the medium s Replaceable body lining with firm back-up ring s Permanently tight closure s Optimum operation under vacuum conditions s Standardized head flange for actuator adaption s Materials for almost all media s Short face-to-face dimension s Maintenance-free version s Blow-out proof shaft s Direct mounting of actuators without any additional brackets Over 70,000 Butterfly Valves Series VIA/RS are installed in 60 power generation sites and many sugar refineries worldwide. Used on the most arduous conditions, this is proof of the Series VIA/RS durability and reliability when in operation.
Main areas of application: q q q q q q q q q q Paper industry Sugar industry Power generation plants Chemical and petrochemical industry Steel industry Automotive industry Energy supply Shipbuilding industry Breweries Cement plants Applications: q q q q q q q q q Hot and cooling water Air-conditioning systems Drinking water systems Flue-gas desulphurisation Compressed air systems Vacuum systems Purification plants Sewage treatment plants Gas systems

Valves Program

Technical data: s DN 40 1200 s PN 6, 10, 16, ANSI 150 s Temperature range from -34C (-29F) to +150C (+302F) s Tightness in accordance with DIN 3230-T3, leakage rate 1 s Face-to-face dimension in accordance with EN 558-1, series 20 s Mounting flange in accordance with ISO 5211 s Shaft end DN 50 300 with square in accordance with DIN 3337 s Insulation in accordance with heating system regulation possible s DVGW gas approval s Quality assurance in accordance with ISO 9001

Valves Program

Design features
Corrosion resistance With CENTERLINE Butterfly Valves Series VIA/RS only 2 parts of the valve come into contact with the medium. This means that neither the body nor mechanical parts such as the shaft are subject to the danger of corrosion. The only two parts in contact with the medium are the body lining and the disc. These are available in a selection of materials so that a suitable corrosion resistant combination can be chosen for almost any application. Permanently tight closure CENTERLINE Butterfly Valves seal absolutely liquid and gas-tight in both flow directions due to their centric design. The disc presses with a defined, uniform compression into the elastic body lining over the entire circumference of 360. The power transmission between shaft and disc is accomplished by a square and enables axial movement and automatic centering of the disc. Excess stress and wear of the elastomer are avoided. Elastic body lining The replaceable body lining consists of a reinforced back-up ring, on which the elastic seat material is vulcanized. When mounting the valve between the pipe flanges this stable seat cannot be displaced or pushed out. When the valve closes a stretching and bulging of the elastomer in front of the closing disc is avoided. The fixed connection between elastomer and back-up ring enables the application of the valve even under vacuum or high flow velocities. The slightly protruding sealing lip of the body lining constitutes at the same time the flange seal.

Valves Program

1 2
Shaft lock

All CENTERLINE Butterfly Valves Series VIA/RS feature a lock at the valve neck avoiding a blowing-out of the shaft during the valves operations life. Actuator mounting All CENTERLINE Butterfly Valves Series VIA/RS feature a mounting in accordance with ISO 5211 for the mounting of hand lever, gear, pneumatic REVO or other automatic actuators. A conversion even during operation from manual to automatic actuator and reverse is possible without any difficulties. Actuator adaptation CENTERLINE Butterfly Valves Series VIA/RS are available for 3 closing pressures (operating pressures) 3.5 bar (51 psi), 10 bar (145 psi) and 16 bar (232 psi). The actuator size can be selected individually against the pipeline pressure available, so that with lower pipeline pressures even smaller actuators can be utilised due to the lower torques.

4 5 2 6
Maintenance-free operation The shafts of the CENTERLINE Butterfly Valves Series VIA/RS are mounted in self-lubricating DU bearing bushes so that there is no need for maintenance even after a long operating period.

7
1 2 3 4 5 6 7 8 9

Shaft Bearing bush Body Shaft lock Citclip Body lining (with vulcanized back-up ring) Disc Dowelling Lower Stem

Valves Program

Versions available
With the proven modular system, CENTERLINE Butterfly Valves Series VIA/RS can be directly equipped with a variety of actuators. Available ex stock, various manual actuators together with those from the REVO pneumatic range can be fitted and assembled quickly to meet your needs. A number of accessories including three way version and shaft extensions are also available. Contact your local stockist for more information.

Wafer body with centering lugs DN 50 - 300 PN 6, 10, 16 ANSI 150

Wafer body

Lug-type body

DN 50 - 600 PN 6, 10, 16 ANSI 150

DN 50 - 600 PN 6, 10, 16 ANSI 150

Valves Program

Standards considered
Design: Face-to-face dimension: EN 593 EN 558-1, Series 20 (previously DIN 3202-K1) ISO 5752-short ISO 5211 DIN 3337-square (only for DN 40-300) EN 1092-1, EN 1759-1, ANSI B16.5, Class 150 MSS-SP 44 DIN 3230-T3, leakage rate 1

Head flange: Shaft end:

Flange connection:

Testing:

Identification: EN 19 MSS SP-25 CE in accordance with PED 97/23 EG Quality assurance: Approvals: ISO 9001

DVGW Lloyds Register Det Norske Veritas American Bureau of Shipping Leybold Systems Vakuumtest

Lug-type body Flange body DN 700 - 1200 PN 10, 16 MSS-SP44

Valves Program

Crane Process Flow Technologies GmbH

P.O.-Box 11 12 40 D-40512 Dsseldorf Heerdter Lohweg 63-71 D-40549 Dsseldorf Phone +49 211 5956-0 Fax +49 211 5956-111
We reserve the right for all technical modifications

Valves Program

CENTERLINE-Butterfly Valves Series VIA/RS

Model Numbers DN 40-1200
A
1

M
2

G
3

D
4

1
5

E
6

1
7

0
8

0
9

H
10

1. Series:
A = Series VIA/RS

5. Body Design / Material:

1= 2= 5= 7= 8= Wafer body GGG40 Wafer body GG25 *5) Lug body GGG40 Lug body GS-C25 Flanged body GGG40 (only DN40-600) (only DN40-300) (only DN40-600) (only DN700-1200)

2. Size:
G H K L M N P R S T = = = = = = = = = = 040 050 065 080 100 125 150 200 250 300 (1,5) (2) (2,5) (3) (4) (5) (6) (8) (10) (12) U V W X Y Z 2 3 4 7 = 350 = 400 = 450 = 500 = 600 = 700 = 800 = 900 = 1000 = 1200 (14) (16) (18) (20) (24) (28) (32) (36) (40) (48)

6. Body Liner Material:

B C E F H V = = = = = = NBR (Buna-N 4)) HNBR (only DN40-600) EPDM EPDM-H with KTW-approval CSM (Hypalon 4)) FPM (Viton 4))

3. Disc Material and Shutoff Pressure:

B G S C H T A F R K L P N M = = = = = = = = = = = = = = Stainless steel ) 3,5 bar Stainless steel 10 bar Stainless steel 16 bar Ductile iron, nickel-plated 2) 6) 3,5 bar Ductile iron, nickel-plated 2) 10 bar Ductile iron, nickel-plated 2) 16 bar Aluminium bronze 6) 3,5 bar Aluminium bronze 10 bar Aluminium bronze 16 bar ECTFE, coated 10 bar Rilsan, coated 2) 10 bar Hostalen-GUR 3) 10 bar Duplex 10 bar Hastelloy 10 bar
6

7. Shaft Material:
1 2 = = Cr steel (standard) CrNi steel

8. + 9. Design 1):
00 = UD = Standard Pressure and leak test BA/BN acc. to DIN 3230-T3 as well as material certification for body approved acc. to EN 10204- 3.1B Pressure and leak test BA/BN acc. to DIN 3230-T3 as well as material certification for body approved acc. to EN 10204- 3.1B as well as separate KKS head flange tag

UG =

4. Pressure Class:
Body Design DN PN 40150 A D N D N 200450 A D N B C N 500600 B C N B C N 7001200 B C S

10. Actuation 1):

F = bare shaft G = Gear operator with hand wheel H = 10 pos. hand lever (only up to DN200)

Wafer body PN 6* PN 10 PN 16 PN 10/16 ANSI 150** MSS-SP 44 Lug-type PN10 body/ PN16 Flanged PN 10/16 body ANSI 150** MSS-SP 44

Each CENTERLINE Butterfly Valve Series VIA/RS has a name plate with the model number stamped on. This number is complete to such an extent that it specifies each detail of the valve. It can be taken from the model numbering system above. Ordering example: CENTERLINE Butterfly Valve Series VIA/RS, DN 100, PN10/16, shutoff pressure of 10 bar, wafer body GGG40, shaft made of Cr steel, stainless steel disc, body liner EPDM, with 10 pos. hand lever Modell Number: AMGD1E100H

* DN50-300 only GG ** not DN40 1 ) further versions available on request 2 ) not DN40-150 3 ) only DN50-800 4 ) Registered trademark or trade name 5 ) with centering lugs, not DN40 6 ) not DN50-80

RS/DB-0002-GB/09.01/GP

Valves Program

Model Numbers for Gear Operators

The model number of the gear operator is composed of a basic number and a specification number. The basic number is to be taken from the table below. The specification number is based on the following code:

Basic number GH2 0200A

see below: Design/Equipment: A = bare shaft H = hand wheel J = hand wheel, lockable K = chain wheel Version: 1 = weatherproof (standard) 2 = waterproof

Specification number H10A

Attachments: A = without C = limit switch IP65, open position D = limit switch IP65, closed position E = limit switch IP65, open/closed position Body finish: 0 = primer coat

Basic numbers for gear operators

CENTERLINE Valve Series VIA/RS DN Shutoff pressure 40-100 125-200 250-300 350-400 450-500 600 700 3,5 bar, 10 bar, 16 bar 3,5 bar, 10 bar, 16 bar 16 bar 3,5 bar, 10 bar, 3,5 bar, 10 bar, 16 bar 16 bar 3,5 bar, 10 bar 16 bar 3,5 bar, 10 bar 16 bar Gear Operator Basic number GH2-0100AGH2-0200AGH2-0300AGH2-0300BGH2-0500BGH2-0500AGH2-0500BGH2-0600AGH2-0600BGH2-0700ACENTERLINE Valve Series VIA/RS DN Shutoff pressure 700 800 3,5 bar, 10 bar 16 bar 10 bar 3,5 bar 16 bar 10 bar 3,5 bar 3,5 bar, 10 bar 3,5 bar, 10 bar Gear Operator Basic number GH2-0700BGH2-0800AGH2-0800BGH2-0800CGH2-0900AGH2-0900BGH2-0900CGH2-1000AGH2-1200B-

900

1000 1200

Selection table hand lever/gear operator

The following table is a recommendation Shutoff pressure 16 bar 10 bar 3,5 bar 40-125 150 Hand lever DN 200 250 Gear Operator 300-1200

Hand lever up to DN200, gear operator available from DN40 on

We reserve the right for changes to all technical data.

Valves Program

CENTERLINE-Butterfly Valves Series RS

Possible Combinations
RS/DB-0003-GB/07.04/GP
DN 10001200
MSS-SP44 PN 10/16

Component Actuation

Version Hand lever, 10 positions Hand lever, infinitely adjustable Gear operator Pneumatic Revo actuator Hydraulic actuator Electric actuator -

DN 40-200 40-200 40-1200 40-1200 40-1200 40-1200 40-1200 40-1200

Material Chromium steel Stainless steel NBR HNBR EPDM FPM CSM EPDM-H Ductile iron, nickel-plated Stainless steel Aluminium bronze GGG-Rilsan coated 1) GGG-ECTFE coated 1) Hastelloy-C 1) 2) Hastelloy-C22C 1) 2) Super Duplex 1) Hostalen GUR lined 1) Chromium steel Stainless steel
DN 700-900

Shaft

Body liner

Disc

40-1200 40-1200 40-1200 40-1200 40-600 40-1200 200-600 40-1200 40-700 200-1200 40-1200 40-600 700-1200 40-1200 50-1200 40-1200 40-700

Lower stem

Body

Version

Material

DN 40-300

DN 350-600

Wafer body Lug body

GGG-40

PN 10/16/ANSI 150

PN 10/16/ANSI 150

4)

GGG-40 GS-C25

PN 10/16/ANSI 150 PN 10/16/ANSI 150 PN 16/MSS-SP44 PN 10/16/ANSI 150 PN 10/16/ANSI 150 -

Wafer body with GG 25 centering lugs Flanged body

3)

PN 6/10/16

GGG 40

PN 10

1)

only for shutoff pressure of 10 bar or equivalent 3) DN 40 only wafer body, not PN 6 4) Through hole thread
2)

We reserve the right for changes to all technical data.

Valves Program

CENTERLINE-Butterfly Valves Series VIA/RS

Material Selection DN 40-600
RS/DB-0004-GB/10.01/GP
1 6 5

7 8 4

8 7 12 7 8 10 4 3 8 7 1 5 1 6 2 2 3 12

DN 40-300

11

DN 350-600

Component Parts not in contact with the medium Body (1)

Material specification EN-GJL-250 EN-GJS-400-15 GP 240 GH Chromium steel X20Cr13 Stainless steel X5CrNiMo 18/10 Spring steel, galvanized DU/ plastics 2) Spring steel, galvanized Steel Bronze Galvanized steel
2)

Material no. JL-1040 JS-1030 1.0619 1.4021 1.4401

1)

Shaft (4) and Pin (5) Roll pin (6) Bushing (7) Retaining ring (8) Key (10) Bushing (11) Screw (12)
1)

only wafer body with centering lugs (DN50-300)

according to the manufacturers choice

Valves Program

Component Material specification

Material no.
JS-1030 JS-1030 JS-1030 UHMWPE 2.0975.01

Temperature range
-10 C, top temperature limited

Parts in contact with the medium

Ductile iron, nickel-plated GGG-40-gal Ni1) Ductile iron, VIADURcoated1) Ductile iron, ECTFEcoated Ductile iron, Hostalen Gur lined Aluminium bronze G-CuAl 10Ni Stainless steel, according to manufacturers choice G-X5CrNiMo 19-11-2 G-X5CrNiMoNb 18/10 Duplex steel G-X2CrNiMoCuN 27 77 43 Hastelloy C* G-NiMo16Cr Body liner (3) EPDM

Disc (2)

by body liner
-10 C bis +80 C -10 C, top temperature limited

by body liner
-10 C bis +70 C

limited by body liner limited by body liner

1.4408 1.4581 9.4517 2.4883

limited by body liner limited by body liner

-34 C to +120 C

(ethylene-propyleneterpolymer)
EPDM-H -34 C to +140 C

(ethylene-propyleneterpolymer) NBR (perbunane) (copolymer of acrylonitrilebutadiene rubber)

HNBR

(with KTW-approval)
-20 C to +80 C

(up to 100C with intermittend operation)

-20 C to +120 C

(hydrogenated acrylonitrilebutadiene rubber)

FPM (Viton)* -5 C to +150 C

(copolymer of vinyl fluoride)

CSM (Hypalon) -20 C to +80 C

(chlorine-sulfonated polyethylene)
* or equivalent 1) only DN 200-600

(up to 100C with intermittend operation)

We reserve the right for changes to all technical data.

Valves Program

CENTERLINE-Butterfly Valves Series VIA/RS

Dimensions/ Weights DN 40-600
Wafer body Shaft end DN 40-300 Shaft end DN 350-600 Lug body

O=number of bores

Dimensions in mm, bare shaft

Measure- Pressure ment class A1)
A2) B C1) C2) D4) E4) H4) L4) M M M N N N O O O P R S4) T U V W X

403) 11/2
202 202 72 130 130

50 2"
202 202 72 130 130

65 21/2
225 225 79 146 146 65 14 16

80 3"
240 251 86 154 165

100 4"
268 286 101 167 185

125 5"
292 314 112 180 202

Size 150 200 6" 8"

320 342 125 195 217 90 15 19 386 401 156 230 245

250 10"

300 12"

350 14"
627 277 350 -

400 16"

450 18"

500 20"

600 24"
934 424 510 210 25 80 154 725 770 749,3 M 27 M 33 11/4"-7 UNC

PN 10 PN 16 ANSI 150 PN 10 PN 16 ANSI 150 PN 10 PN 16 ANSI 150

43 110 110 -

43 125 125 120,7

4 4 -

46 52 145 160 180 145 160 180 139,7 152,4 190,5 M 16 M 16 5/8"-11 UNC 8 8 4

56 60 210 240 295 210 240 295 215,9 241,3 298,5 M 20 M 20 3/4"-10 UNC 8 12 8 55 17-0,1

462 542 462 542 192 242 270 300 270 300 125 18 24 68 78 350 400 355 410 362 431,3 M 20 M 24 7/8"-9 UNC 12 12 12 70 22-0,1

677 743 793 302 341 366 375 402 427 175 23 65 78 102 114 127 460 515 565 620 470 525 585 650 476,3 539,8 577,9 635 M 24 M 27 M 30 1"-8 UNC 11/8"-7 UNC 16 16 16 14 100 5 327 129 371 423 472 141 162 181 45 140/4 x 18 F14 20 20

20 20 130 7 575 221 70 165/4 x 22 F16

35 14-0,1 3,5 39 7 39 7 56 13 71 19 93 27 50/4 x 7 F05 117 37

144 49

191 70

240 90

291 111

70/4 x 9 F07
4)

102/4 x 11 F10

1)

Body made of GGG/GS-C

2)

Body made of GG 3)Inner parts DN 50

Dimensions in accordance with DIN/ISO

Weights in kg
Bare shaft valve
Wafer body* Lug body

40
2,2 3,4

50
2,2 3,4

65
2,8 4,0

80
3,4 4,8

100
4,7 6,9

125
6,8 10,6

150
7,6 11,4

Size 200
11,5 15,9

250
19,6 26,0

300
31,2 38,2

350
50 60

400
72 92

450
92 108

500
111 151

600
195 245

* version with centering lugs made of GG25 up to DN300

RS/DB-0006-GB/10.01/GP

Valves Program

Valve with hand lever

Valve with gear operator

Valve with Revo actuator

Dimensions in mm*, with actuations

Measurement 40 A1) A2) B C1) C2) D1) D2) E F G H1) H2) L1 L2 M 181 181 200 206 206 172 172 230 200 65 216 216 38 33 175 50 181 181 200 206 206 172 172 230 200 65 216 216 38 33 175 65 197 197 200 222 222 188 188 230 200 65 232 232 38 33 175 80 205 216 200 230 241 196 207 230 200 65 266,5 277,5 52,5 41 205 100 218 236 200 243 261 209 227 230 200 65 308 326 67 55 214 125 231 253 240 256 278 222 244 230 250 65 321 343 67 55 214 150 246 268 240 271 293 237 259 230 250 65 361 383 79 67 267 Size 200 281 296 240 306 321 272 287 230 250 65 396 411 79 67 267 250 346 346 312 312 230 250 65 456 456 94 78 355 300 376 376 342 342 230 250 65 486 486 94 78 355 350 437 402 285 400 96 652 135 119 388 400 462 427 285 400 96 677 135 119 388 450 489 454 285 400 96 704 135 119 510 500 514 479 285 400 96 729 135 119 510 600 616 560 366 610 123 962 211 211 533

* Dimensions apply to valves PN 10/16 p 10 bar, Revo actuator, double-acting at 5 bar air supply 1) Body made of GGG/GS-C 2) Body made of GG

Weights in kg**
Valve with 40 Hand lever Gear operator Revo actuator 3,8 10,2 4,3 50 3,8 10,2 4,3 65 4,4 10,8 4,9 80 4,6 11,0 5,6 100 5,9 12,3 8,1 125 8,5 14,8 10,6 150 9,5 15,8 11,4 Size 200 13,6 19,9 19,4 250 24,5 27,6 31,2 300 35,9 39,0 43,2 350 400 450 500 600

66,8 88,8 108,8 127,8 230,0 76,0 104,0 129,0 148,0 318,0

** Weights apply to valves with wafer body

We reserve the right for changes to all technical data.

Valves Program

CENTERLINE-Butterfly Valves Series VIA/RS

Dimensions/ Weights DN 700-1200
RS/DB-0007-GB/10.01/GP

G =keyway

Section A-B Flanged body

Section A-B Lug body

off-set drawn

Dimensions in mm, bare shaft end

Measurement
A B C D 3) E F G H J L 3) M N O1) O2) R 3) T U V X Y P Q
1) 2) 3)

Pressureclass

1065 515 550 70 20 x 115 PN10 PN16 PN10 PN16 PN10 PN16 PN16 PN10 PN16 910 910 165 840 840 2x4xM27x35 deep 2x4xM33x40 deep 2 x 20 x M33 2 x 20 x 30 2 x 20 x 30 669 262 686 45 155

700 28

1200 580 620 300 25 75 20 x 115 110 1025 1025 190 950 950 2x4xM30x43 deep 2x4xM36x43 deep 2 x 20 x M36 2 x 20 x 33 2 x 20 x 33 200 766 300 786 50 180

800 32

1330 640 690 85 22 x 115 1125 1125 203 1050 1050 2x4xM30x43 deep 2x4xM36x43 deep 2 x 24 x M36 2 x 24 x 33 2 x 24 x 33

Size 900 36

1000 40
1540 750 790

1200 48
1765 855 910

130 1230 1455 1255 1485 216 254 1160 1380 1170 1390 2x4xM33x48 deep 2x4xM36x48 deep 2x4xM39x48 deep 2x4xM45x48 deep 2 x 24 x 36 2 x 24 x 42 2 x 28 x 39 2 x 28 x 48

90 25 x 130

350 35

95 25 x 130

5 865 343 254/8 x 17,5 (F25) 885 50 190

230

965 1160 387 467 298/8 x 22(F30) 986 1186 50 55 206 244

Lug body Flanged body Dimensions in accordance with DIN/ISO

Valves Program

Dimensions in mm, (valve with gear operator *)

Measurement
A B C D E
* for valves p 10 bar

700 28
678 616 497 610 138

800 32
748 686 497 610 138

Size 900 36
849 754 529 610 181

1000 40
954 860 551 610 237

1200 48
1074 980 551 610 237

Weights in kg
Measurement
flanged/lug body bare shaft flanged/ lug body with gear operator

700 28
450 515

800 32
550 615

Size 900 36
700 808

1000 40
900 1069

1200 48
1350 1519

We reserve the right for changes to all technical data.

Valves Program

CENTERLINE-Butterfly Valves Series VIA/RS

Gear Operators for Butterfly Valves DN 40-1200
RS/DB-0008-GB/02.03/GP

Model Numbers and Weights

Valve Shutoff pressure bar 3,5-16 3,5-16 3,5-10 16 3,5-16 3,5-10 Gear operator with handwheel Model GH2-0100A-H10A GH2-0200A-H10A GH2-0300B-H10A GH2-0300A-H10A GH2-0500B-H10A GH2-0500B-H10A Weight kg 7,8 8,0 10,8 19,6 16,8 16,8 Gear operator with lockable handwheel Model GH2-0100A-J10A GH2-0200A-J10A GH2-0300B-J10A GH2-0300A-J10A GH2-0500B-J10A GH2-0100B-J10A Weight kg 8,0 8,2 10,4 19,8 17,4 17,4 Gear operator with chainwheel Model GH2-0100A-K10A GH2-0200A-K10A GH2-0300B-K10A GH2-0300A-K10A GH2-0500B-K10A GH2-0500B-K10A Weight kg 7,7 7,7 7,7 16,6 21,2 21,2

DN 40-100 125-200 250-300 250-300 350-400 450-500

Article number for chain: 6104010. When ordering specify length.

Flange drilled only for configuration lockable Handwheel Chainwheel

Dimensions
Gear operator Handwheel model turns for 90 GH2-0100A GH2-0200A GH2-0300B GH2-0300A GH2-0500B 10 10 10 19 19 A 42 42 42 52 52 B 76 76 76 87 87 C 64 64 64 100 100 D 92 92 92 134 134 E Dimensions in mm F G 200 250 250 400 400 265 265 265 365 365 H 184 184 184 212 212 K 184 184 184 242 242 L 65 65 65 96 96 M 45 45 45 64 64 230 230 230 282 282

Valves Program

Model Numbers and Weights

Valve Shutoff pressure bar 16 3,5-10 16 3,5-10 16 3,5 10 Gear operator with handwheel Model GH2-0500A-H10A GH2-0600B-H10A GH2-0600A-H10A GH2-0700B-H10A GH2-0700A-H10A GH2-0800C-H10A GH2-0800B-H10A Weight Kg 32 32 65 65 108 65 65 DN 800 900 Valve Shutoff pressure bar 16 3,5 10 16 3,5-16 3,5-10 16 Gear operator with handwheel Model GH2-0800A-H10A GH2-0900C-H10A GH2-0900B-H10A GH2-0900A-H10A GH2-1000A-H10A GH2-1200B-H10A GH2-1200A-H10A Weight kg 169 65 108 169 169 169 262

DN 450/500 600 700 800

1000 1200

Gear operator without spur gear

Gear operator with spur gear

Gear operator with spur gear

Dimensions
Gear operator Model GH2-0500A/0600B GH2-0600A GH2-0700B GH2-0700A GH2-0800C GH2-0800B GH2-0800A GH2-0900C GH2-0900B GH2-0900A GH2-1000A GH2-1200B GH2-1200A Handwheel turns for 90 A 17 50 43 66 43 66 63 63,5 43 66 45 66 75 70 45 66 63 63,5 75 70 75 70 75 70 188 83 Dimensions in mm B 106 128 128 159 128 128 164 128 159 164 164 164 175 C 114 155 155 140 175 155 175 155 140 175 175 175 178 D 178 195 195 251 195 195 326 195 251 326 326 326 400 E 252 310 310 356 310 310 463 310 356 463 463 463 565 F 366 497 497 529 497 497 551 497 529 551 551 551 655 G 123 138 138 181 138 138 237 138 181 237 237 237 292 H 610 610 610 610 610 610 610 610 610 610 610 610 610 J 210 210 210 210 210 210 210 210 210 210 210 K 171 171 171 171 171 171 171 171 171 171 171 L 78 78 84 78 84 84 84 84 84 84 84 M 284 N 94 O 188

We reserve the right for changes to all technical specifications.

Valves Program

CENTERLINE-Butterfly Valves Series RS

Spare parts DN 40-1200 Replaceble Seat Ring
Body liner
Material EPDM EPDM-H NBR HNBR FPM CSM Identity code 9E-000B *1) 8L 8N 8H 8F 8C RS/DB-0009-GB/07.04/GP

Size 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1,5 2 2,5 3 4 5 6 8 10 12 14 16 18 20 24 28 32 36 40 48

Article number KS1A0040-XX-0000 KS1A0050-XX-0000 KS1A0065-XX-0000 KS1A0080-XX-0000 KS1A0100-XX-0000 KS1A0125-XX-0000 KS1A0150-XX-0000 KS1A0200-XX-0000 KS1A0250-XX-0000 KS1A0300-XX-0000 KS1A0350-XX-0000 KS1A0400-XX-0000 KS1A0450-XX-0000 KS1A0500-XX-0000 KS1A0600-XX-0000 KS1A0700-XX-0000 KS1A0800-XX-0000 KS1A0900-XX-0000 KS1A1000-XX-0000 KS1A1200-XX-0000

"XX in the article number is to be replaced by the identity code listed for the material. Example: Body liner DN 200 made of NBR: KS1A0200-8N-0000 *1) only DN 40250, for DN 3001200 8L is to be specified Inner part DN 40 equal DN 50

We reserve the right for changes to all technical data.

Valves Program

CENTERLINE-Butterfly Valves Series VIA /RS

Spare Parts DN 40-1200
Discs
Material
DN Shutoff Pressure bar 16 10 65 16 10 80 16 10 100 16 10 3,5 125 16 10 3,5 150 16 10 3,5 200 16 10 3,5 250 16 10 3,5 300 16 10 3,5 KD1A0200 1BP03N KD1A0200 1BN03N KD1A0200 1BM03N KD1A0250 1BP03N KD1A0250 1BN03N KD1A0250 1BM03N KD1A0300 1BP03N KD1A0300 1BN03N KD1A0300 1BM03N GGG ni. pltd. Stainless Steel KD1B0050 3HW000 KD1B0050 3HW000 KD1B0065 3HW000 KD1B0065 3HW000 KD1B0080 3HW000 KD1B0080 3HW000 KD1B0100 3HP000 KD1B0100 3HN000 KD1B0100 3HM000 KD1B0125 3HP000 KD1B0125 3HN000 KD1B0125 3HM000 KD1B0150 3HP000 KD1B0150 3HN000 KD1B0150 3HM000 KD1A0200 3AP000 KD1A0200 3AN000 KD1A0200 3AM000 KD1A0250 3AP000 KD1A0250 3AN000 KD1A0250 3AM000 KD1A0300 3AP000 KD1A0300 3AN000 KD1A0300 3AM000 Alu-Bronze HastelloyC KD1B0050 4CP000 KD1B0050 4CN000 KD1B0065 4CP000 KD1B0065 4CN000 KD1B0080 4CP000 KD1B0080 4CN000 KD1B0100 4CP000 KD1B0100 4CN000 HastelloyC22C Duplex ECTFE coated VIADUR coated Hostalen GUR lined

50

KD1B0050 4AN000

KD1B0050 4DN000

KD1B0050 1BS03E

KD1B0050 1BNB3B

KD1B0065 4AN000

KD1B0065 4DN000

KD1B0065 1BS03E

KD1B0065 1BNB3B

KD1B0080 4AN000

KD1B0080 4DN000

KD1B0080 1BS03E

KD1B0080 1BNB3B

KD1B0100 4AN000

KD1B0100 4DN000

KD1B0100 1BS03E

KD1B0100 1BNB3B

KD1B0125 4CP000 KD1B0125 4CN000

KD1B0125 4AN000

KD1B0125 4DN000

KD1B0125 1BS03E

KD1B0125 1BNB3B

KD1B0150 4CP000 KD1B0150 4CN000

KD1B0150 4AN000

KD1B0150 4DN000

KD1B0150 1BS03E

KD1B0150 1BNB3B

KD1A0200 4CP000 KD1A0200 4CN000

KD1A0200 4AN000

KD1A0200 4DN000

KD1A0200 1BS03E

KD1A0200 1BS03M

KD1A0200 1BNB3B

KD1A0250 4CP000 KD1A0250 4CN000

KD1A0250 4AN000

KD1A0250 4DN000

KD1A0250 1BS03E

KD1A0250 1BS03M

KD1A0250 1BNB3B

KD1A0300 4CP000 KD1A0300 4CN000

KD1A0300 4AN000

KD1A0300 4DN000

KD1A0300 1BS03E

KD1A0300 1BS03M

KD1A0300 1BNB3B

DN 40 discs as DN 50

Other sizes see back page

RS/DB-0010-GB/02.03/GP

Valves Program
Material
Shutoff GGG Pressure ni. pltd. bar 350 16 KD1A0350 1BP03N 10 KD1A0350 1BN03N 3,5 KD1A0350 1BM03N 400 16 KD1A0400 1BP03N 10 KD1A0400 1BN03N 3,5 KD1A0400 1BM03N 450 16 KD1A0450 1BP03N 10 KD1A0450 1BN03N 3,5 KD1A0450 1BM03N 500 16 KD1A0500 1BP03N 10 KD1A0500 1BN03N 3,5 KD1A0500 1BM03N 600 16 KD1A0600 1BP03N 10 KD1A0600 1BN03N 3,5 KD1A0600 1BM03N 700 10 KD1A0700 1BN03N 800 10 KD1A0800 1BN03N 900 10 KD1A0900 1BN03N 1000 10 KD1A1000 1BN03N 1200 10 KD1A1200 1BN03N DN Stainless Steel KD1A0350 3AP000 KD1A0350 3AN000 KD1A0350 3AM000 KD1A0400 3AP000 KD1A0400 3AN000 KD1A0400 3AM000 KD1A0450 3AP000 KD1A0450 3AN000 KD1A0450 3AM000 KD1A0500 3AP000 KD1A0500 3AN000 KD1A0500 3AM000 KD1A0600 3AP000 KD1A0600 3AN000 KD1A0600 3AM000 KD1A0700 3AN000 KD1A0800 3AN000 KD1A0900 3AN000 KD1A1000 3AN000 KD1A1200 3AN000 Alu-Bronze HastelloyC KD1A0350 4CP000 KD1A0350 4CN000 HastelloyC22C Duplex ECTFE coated VIADUR coated Hostalen GUR lined

KD1A0350 4AN000

KD1A0350 4DN000

KD1A0350 1BS03E

KD1A0350 KD1A02350 1BS03M 1BNB3B

KD1A0400 4CP000 KD1A0400 4CN000

KD1A0400 4AN000

KD1A0400 4DN000

KD1A0400 1BS03E

KD1A0400 1BS03M

KD1A0400 1BNB3B

KD1A0450 4CP000 KD1A0450 4CN000

KD1A0450 4AN000

KD1A0450 4DN000

KD1A0450 1BS03E

KD1A0450 1BS03M

KD1A0450 1BNB3B

KD1A0500 4CP000 KD1A0500 4CN000

KD1A0500 4AN000

KD1A0500 4DN000

KD1A0500 1BS03E

KD1A0500 1BS03M

KD1A0500 1BNB3B

KD1A0600 4CP000 KD1A0600 4CN000

KD1A0600 4AN000

KD1A0600 4DN000

KD1A0600 1BS03E

KD1A0600 1BS03M

KD1A0600 1BNB3B

KD1A0700 4HN000 KD1A0800 4HN000 KD1A0900 4HN000 KD1A1000 4HN000 KD1A1200 4HN000

KD1A0700 4DN000 KD1A0800 4DN000 KD1A0900 4DN000 KD1A1000 4DN000 KD1A1200 4DN000

KD1A0700 1BS03E KD1A0800 1BS03E KD1A0900 1BS03E KD1A1000 1BS03E KD1A1200 1BS03E

KD1A0700 1BS03M KD1A0800 1BS03M KD1A0900 1BS03M KD1A1000 1BS03M KD1A1200 1BS03M

KD1A0700 1BNB3B KD1A0800 1BNB3B KD1A0900 1BNB3B

We reserve the right for changes to all technical specifications.

Valves Program

CENTERLINE-Butterfly Valves Series VIA/RS

Chemical Resistance of the Seat
RS/DB-0011-GB/02.03/GP The following Seat Material/Fluid combinations are based on practical experience. The materials quoted may not be suitable for all line media over the entire temperature range. Chemical resistance of the seat can be affected by fluid concentration, temperature, Valve seat material NBR (Perbunan)* Acrylonitrile Butadiene Rubber HNBR (Therban)* Hydrogenated Acrylonitrile Butadiene Rubber EPDM Ethylene Propylene Terpolymer pressure, flow rate and ventilation. Therefore the suitability of any seat material/fluid combination cannot be guaranteed. If in doubt, the suitability should be checked by testing under the required operating conditions. Temperature range -20 C to +80 C or up to +110C for intermittent operation -20 C up to +120 C

Resistant against Petroleum, grease, alcohol, glycol, propane, butane, diesel fuels, compressed air, latex and many other media.

Petroleum, grease, alcohol, glycol, propane, butane, diesel fuels, alkalis, salts, amines, ammonia, many other media. Highly polluted media with high velocity, abrasive media. Ozone, phosphate, ester, ketones, alcohols, glycols, dilutesulphuric acid, alkaline solutions in general, treated water (with caustic soda, sodium sulphite, chlorine), hot water and steam (it is attacked by hydrocarbonaceous solutions and oils, chlorinated hydrocarbons, turpentine and all other petroleum based oils). As EPDM including drinking water approval (KTW/DVGW). Sodium chloride, chromic acid, nitric and hydrofluoric acid, sulphuric acid, hydrocarbon oils, salts, chlorine bleaches and others. Strong and weak mineral acids, aliphatic hydrocarbons, aromatic phenolic and halogenated hydrocarbons, ester of aromatic acids, aliphatic acids, phosphoric acids, phosphoric ester, aromatic ethers, aliphatic ethers, ozone, chlorine and hypochlorite. (Viton* is not suitable for dry heat, hot water and steam).

-34 C up to +120 C

EPDM-H CSM (Hypalon)* Chlorosulphonated Polyethylene Fluorelastomer FPM (Viton)* Fluorelastomer

-34 C up to+140 C -20 C up to +80 C or up to+100C for intermittent operation -20 C up to+150 C

* Trademark or Tradename

We reserve the right for changes to all technical specifications.