AUXILIARY SPOTLIGHT KIT QUICK ATTACHMENT OF
Available on request, in SCRAPING EDGES - PATENTED-
compliance with current traffic Available on request they make it
regulations they back-up the easier and quicker to fit the
vehicle lights and they are scraping edges on the blade.
adjustable.
ADJUSTABLE SUPPORT
WHEELS
On request, they run smoothly
SIDE SUPPORT WHEEL over the ground and are suitable
On request it can also be supplied when working at high speed or
in the roller version. It acts as an when rubber or plastic scraping
ideal safety end-of-stroke support edges are used.
when working near new-jersey
(wheel) or guardrails (roller).
RUBBER SPLASH GUARD
Installed on request, it limits snow
splashes on the vehicle
windscreen.
FORCED RELEASE
COUPLINGS
LATERAL EDGES
Available on request, in plastic
material, they are ideal for clearing
3GS SNOWPLOUGH WITH 3 SECTIONS
Available on request, adjustable, 3GS.30 3GS.33 3GS.36
they renforce the blade elements near new-jersey barriers and help
for a more aggressive job. discharge of the snow.
MOD. 3GS- I - Rev.0 03/08 The technical data are informative and not binding.
ASSALONI.COM S.p.A. 40042 Lizzano in Belvedere (BO) - Italy - Via Luigi Assaloni, 4
Tel. +39-0534 51353 - Fax +39-0534 51583 [email protected] www.assaloni.com www.assaloni.com
OSCILLATION ROTATION
3GS
A central oscillation system Rotation angle from +36 ° to –
(patented) allows the blade to 36°.
follow the road profile.
SNOWPLOUGH WITH 3 SECTIONS
3GS.30 3GS.33 3GS.36
Multiple sector snow clearing blade for medium and high snowfalls equipped with hydraulic controls that rotate it to the left and right and that lift
72°
and lower it. It is siutable for clearing town and main roads and also motorways even when irregular surfaces and many obstacles are involved.
Thanks to the extreme flexibility of the blade, allowing it to surmount obstacles higher than 10 cm without kicking back, the operator can work in
utmost safety.
POLYURETHANE INSERT
Fitted between the steel scraping edge and the blade it offers the
CENTRAL OSCILLATION SYSTEM BY-PASS VALVE
elimination of any vibrations and the rotations of scraping edge when
- PATENTED - In the shock-absorbing
obstacles are encountered with automatic return to the working
position once these have been exceeded. It locks the blade in the horizontal position system of the hydraulic LED SIDE CLEARANCE SPLASH GUARD CLOTH SHEAR CURVATURE
with blade raised and frees it completely rotation circuit it contributes LIGHTS The special profile, complete with
Available on request, adjustable
to follow the road profile with blade in further absorbing impact. On request, they are resistant bolted extension in sheet metal,
according to the working speed
lowered in working position. Thanks to this to vibrations and damp. and to the amount of snow to be perfectly discharges even large
device the scraping edge wears evenly. cleared, it prevents the snow amount of snow.
from splashing up on the
windscreen when working at
high speed.
RAPID ATTACHMENT
OBSTACLE SURPASSING SYSTEM PLATE TO VEHICLE
Available not only in the
ASSALONI version
(patented) but also in the
DIN 76060 or SETRA
version.
140 mm
CENTRAL BEAM
Load-bearing structure that
bears the blade elements and
CONFIGURATION EXAMPLES the shock-absorbing systems.
3GS.30
3GS.33
SHOCK ABSORBING
SYSTEM
SUPPORTING FEET Independent on each element, it
With mechanic height allows tha blade to surmount any
3GS.36 adjustment on the ground. obstacles possibly encountered
and to adapt the latter to uneven
road surfaces.
SAFETY LOCKING DEVICES
In compliance with safety norms
(CE mark).
SIDE BUMPERS
These prevent the blade from
TECHNICAL DATA 3GS.30 3GS.33 3GS.36 sticking into obstacles at the side
Length of scraping edge 3000 3300 3600 mm
ELECT R O - HY DR A U L I C of the road.
Working width (32° max. inclination) 2550 2800 3060 mm
CONTROL UNIT
This can be installed on request SLIDING SHOES
Working width (36° max. inclination) 2430 2680 2900 mm
on the attachment panel of the In SELENE, (KOMBI on request)
STEEL SCRAPING EDGE
Blade height ( without extension) 1150 1150 1150 mm Available on request also in
actuator blade. absorb some of the blade’s weight.
Minimum width for narrow passages at 32° 2770 3010 3270 mm POLYURETHANE, SELENE or KOMBI.
Minimum width for narrow passages at 36° 2690 2900 3150 mm
Number of blade scraping edges 3 3 3 qnt
Height of obtacle that can be surmounted 140 140 140 mm H Y D R A U L I C
Weight of standard version 960 1000 1060 kg SUPPORT FEET
On request.
