E90X TELESCOPIC SNOWPLOUGH FOR
MOTORWAYS AND AIRPORTS
E90X-40/59 E90X-40/66
MOD. E90X - I - Rev.0 03/08 The technical data are informative and not binding.
ASSALONI.COM S.p.A. 40042 Lizzano in Belvedere (BO) - Italy - Via Luigi Assaloni, 4
Tel. +39-0534 51353 - Fax +39-0534 51583 [email protected] www.assaloni.com www.assaloni.com
OSCILLATION ROTATION
A central oscillation system Rotation angle from +32 ° to –
(patented) allows the blade to
follow the road profile.
32°.
E90X TELESCOPIC SNOWPLOUGH FOR
MOTORWAYS AND AIRPORTS
E90X-40/59 E90X-40/66
Telescopic snow plough, suitable for clearing snow at high speed. It is made up of a fixed joint-free structure and two extending
64°
elements, one on the left-hand side and one on the right - hand side, to vary the working width depending on different types of
road surfaces. Equipped with hydraulic lifting-lowering, right-left steering and mobile elements. It can be used for clearing snow
from airports and motorways.
POLYURETHANE INSERT
Fitted between the steel scraping edge and the blade it offers the
elimination of any vibrations and the rotations of scraping edge when
obstacles are encountered with automatic return to the working
position once these have been exceeded. ADJUSTABLE CENTRAL OSCILLATION SYSTEM - PATENTED LED SIDE CLEARANCE
OSCILLATION It locks the blade in the horizontal position with blade LIGHTS SHEAR CURVATURE
It offsets weight differences raised and frees it completely to follow the road profile On request, they are resistant to The special profile, complete with
between right side and left with blade lowered in working position. Thanks to this vibrations and damp. bolted extension in sheet metal,
side. device the scraping edge wears evenly. perfectly discharges even large
amount of snow.
BY-PASS VALVE
In the shock-absorbing system of
the hydraulic rotation circuit it
contributes in further absorbing
impact.
RUBBER SPLASH GUARD
Installed on request, it limits
snow splashes on the vehicle
CLOSED PLOUGH windscreen.
H
RAPID ATTACHMENT
PLATE TO VEHICLE
Available not only in the
ASSALONI version
(patented) but also in the
DIN 76060 or SETRA
G
version.
TELESCOPIC ELEMENTS
Hydraulically controlled, they
SUPPORTING FEET allow to work in the closed,
With mechanic height extended and in-all between
OPEN PLOUGH adjustment on the ground. positions, both on left and right
side.
ADJUSTABLE SUPPORT
WHEELS - PATENTED -
On request, preloaded with
automatic working field, they run
smoothly over the ground and are SIDE BUMPERS
ELECTRO-HYDRAULIC suitable when working at high STEEL SCRAPING EDGE These prevent the blade from
TECHNICAL DATA E90X 40/59 E90X 40/66 CONTROL UNIT speed or when rubber or plastic Available on request also in sticking into obstacles at the
scraping edges are used. POLYURETHANE or KOMBI. side of the road.
Length of scraping edge (variable) A 4000-5900 4000-6600 mm This can be installed on
Working width B 3390-4700 3390-5400 mm
request on the attachment
panel of the actuator blade.
Minimum width for narrow passages C 3560 3560 mm
Maximum protrusion (closed position) D 2560 2560 mm
Protrusion with blade up-right E 1760 1760 mm QUICK ATTACHMENT OF AUXILIARY SPOTLIGHT LATERAL EDGES
Blade height (left side) G 1100 1100 mm SCRAPING EDGES KIT Available on request, in
- PATENTED - Available on request, in plastic material, they are
Blade height (right side) F 1340 1340 mm HYDRAULIC ideal for clearing near new-
Available on request they make compliance with current
Maximum height from the ground 400 400 mm SUPPORT FEET traffic regulations they back- jersey barriers and help
On request. it easier and quicker to fit the
Center of gravity H 1000 1000 mm
up the vehicle lights. discharge of the snow.
scraping edges on the blade.
Weight of standard version 1550 1660 Kg
