L90 SINGLE-SECTION SNOWPLOUGH
L90.26 L90.28 L90.30
MOD. L90 - GB - Rev.0 03/09 The technical data are informative and not binding.
ASSALONI.COM S.p.A. 40042 Lizzano in Belvedere (BO) - Italy - Via Luigi Assaloni, 4
Tel. +39-0534 51353 - Fax +39-0534 51583 [email protected] www.assaloni.com www.assaloni.com
OSCILLATION ROTATION
A central oscillation system Rotation angle from +36 ° to –
(patented) allows the blade to 36°.
follow the road profile.
L90 SINGLE-SECTION SNOWPLOUGH
L90.26 L90.28 L90.30
Light snow plough for medium snow, with monolithic blade. Equipped with hydraulic controls that allow not only right-left rotation, lifting-
+36°
lowering operations, but also to adjust the blade angle of incidence on the road, in relation to snow quantity and type.
OBSTACLE SURPASSING SYSTEM It is perfectly suitable for snow removal both in urban and in extra-urban roads, also with hairpin bend , crossroads, square, emergency
A B C
positions, etc.
LED SIDE CLEARANCE BY-PASS VALVE CENTRAL OSCILLATION SYSTEM -
LIGHTS In the shock-absorbing system of the PATENTED
On request, they are resistant hydraulic rotation circuit it contributes It locks the blade in the horizontal position
to vibrations and damp. in further absorbing impacts. with blade raised and frees it completely
to follow the road profile with blade
SAFETY LOCKING DEVICES lowered in working position. Thanks to this
In compliance with safety norms (CE device the scraping edge wears evenly.
A ) Working position. mark).
B ) Nitrogen accumulator allowing the rotation of the blade.
C ) Automatic return in the working position.
RUBBER SPLASH GUARD
HYDRAULIC ADJUSTMENT OF THE ANGLE On request, installed on request,
It allows to rotate the shear in all positions, also in intermediate it limits snow splashes on the
positions, between A and B points and usually for: vehicle windscreen.
A RAPID ATTACHMENT PLATE
TO VEHICLE
Available not only in the ASSALONI
version (patented) but also in the
DIN 76060 or SETRA version.
35°
16°
SHEAR CURVATURE
The special profile perfectly
discharges even large amounts
B of snow.
°
24 11°
POSITION A: (+16° / +35°) heavy and wet snow or a lot of snow. STEEL SCRAPING EDGE
Available on request also in
POSITION B: (-24° / -11°) powdery snow or to scrape. POLIURETANO, SELENE or
KOMBI.
SUPPORTING FEET
With mechanic height adjustment
on the ground.
LATERAL EDGES
On request, in plastic material, they
ELECTRO-HYDRAULIC
are ideal for clearing near new-jersey
barriers and help discharge of the CONTROL UNIT
snow. This can be installed on request SLIDING SHOES
on the attachment panel of the On request, absorb some of the
actuator blade. blade’s weight.
TECHNICAL DATA L90.26 L90.28 L90.30
Length of scraping edge 2600 2800 3000 mm
Working width (36° max. inclination) 2100 2260 2450 mm
Blade height 1000 1000 1000 mm HYDRAULIC AUXILIARY SPOTLIGHT KIT HYDROMECHANIC ACCUMULATOR SIDE BUMPERS
SUPPORT FEET On request, in compliance with In the lifting circuit, it allows to adjust the On request, these prevent
Minimum width for narrow passages 2240 2400 2560 mm
On request. current traffic regulations they pressure on the road surface in order to the blade from sticking into
Number of blade scraping edges 1 1 1 qnt back-up the vehicle lights and avoid polyurethane scraping edge wear. obstacles at the side of the
Weight 490 510 530 kg they are adjustable. road.
