PUMPS FOR

WASTEWATER TREATMENT
SUBMERSIBLE SE WAGE PUMP S

M(X), MXS, V(X), K(X) series | Discharge connector DN 80 - DN 150

HOMA: QUALITY PRODUCTS FOR WASTE WATER SYSTEMS
HIGH EFFICIENCY AND ECONOMIC VIABILITY HIGHER FUNCTIONAL RELIABILITY,
LOWER ENERGY CONSUMPTION
Submersible pumps from HOMA have been in use
around the world for decades. Requirements for the With HOMA you are always in good hands – our pump
waste water sector are constantly increasing. HOMA stations are controlled and monitored fully automatically,
products go beyond state of the art – through the and faults are registered automatically, too. The pumps
continual optimisation of their hydraulic components and run with the lowest possible energy consumption,
motors, they ensure economic operation and an which is also ensured by optimally matched water level
affordable purchase price. All of the company’s expertise control devices, such as floats, pneumatics, ultrasound
and creative potential have been incorporated into its and hydrostatic level sensors (ENS sensors).
products and services – for maximum customer benefit.
In many cases, both the pump and control system have
INDIVIDUAL POSSIBILITIES, OPTIMUM to meet the relevant requirements and regulations on
SOLUTIONS explosion protection. All HOMA pumps are therefore
HOMA unites safety, economic viability, high quality and also available as explosion-proof versions.
robust system technology with customisation options:
the product spectrum ranges from complete pump
stations with pumps, valves, pipework, pre-assembled
concrete or plastic sumps, through to electronic control
systems. The focus is on optimum design with cost
effective workflows on site for all installation types.

2 | HOMA - PUMP TECHNOLOGY

 Each unit is tested in the modern test center before delivery. This is how we
guarantee HOMA´s renowned quality standards.

For chemically aggressive liquids: Stainless steel submersible pumps of HOMA.

PROVEN TECHNOLOGY FOR A BROAD RANGE OF APPLICATIONS

MULTIPLE DEMANDS – INDIVIDUAL SOLUTIONS MORE POWER FOR EVERY REQUIREMENT
Submersible waste water pumps from HOMA convey HOMA pumps are used in all manner of applications:
domestic, public and industrial waste water, sewage to supply water to power stations, as seepage pumps
(containing faeces), and sludge (which may contain high in coal mines, drainage pumps in infrastructure
levels of solid and fibrous matter), as well as domestic projects, waste water pumps for industrial waste
waste water of any kind. Thanks to the use of a broad water, or as ballast pumps in the shipbuilding and
range of materials (stainless steel in different grades, marine sector. Customers benefit from proven features
bronze, Viton, etc.), HOMA submersible pumps are tried and tested in real life applications, such as:
suitable for a wide variety of industrial applications.
• A range of different impellers, depending on the
• Industrial waste water medium being conveyed, e.g. special symmetries,
• Sewage treatment plants hardened materials and ceramic coatings
• Large scale pump stations • Motors suitable for continuous operation, with or
without cooling jackets
• Industrial applications
• High grade materials
• Oil and gas
• Robust construction
• Power station construction
• Mining
• Chemical processes
• Shipbuilding/offshore sector

HOMA - PUMP TECHNOLOGY | 3

FOR GREATER SAFETY AND DURABILITY
MORE BENEFITS IN ALL OPERATING MODES TOP MATERIAL QUALITY –
LOWER SUSCEPTIBILITY TO FAILURE
For operating mode S1 (continuous operation), the
motors are designed with a maximum switching Quality is a measurable value – fully floodable pump
frequency of 15 operating cycles per hour. In addition blocks from HOMA impress through their generous
to the standard version for operation with a submerged sizing of all important components, with outstanding
motor, a special version with cooling jacket is also material quality and solid mechanical workmanship. This
available for use with a surface motor or dry installed guarantees a long service life
motor.

Hydraulics with single-channel impellers are suitable for

intermittent operation (i.e. generally for level-controlled
automatic sump operation) and continuous operation.
Vortex or multi-channel impellers are the right choice
for continuous operation in particular, e.g. for industrial
service water supply.

4 | HOMA - PUMP TECHNOLOGY

 In-house motor production allows various voltages and frequencies

By machining all needed components in our own workshop on modern precision

equipment we are able to assure efficiency and flexibility.

DIFFERENT INSTALLATION TYPES ALLOW GREATER EASE OF SERVICE

STATIONARY WET WELL INSTALLATION
The pump is connected to the pressure pipe and is made
pressure-tight by means of a coupling base attached to
the bottom of the sump. For maintenance or repair, it
can be removed from its operating position from above
through the sump opening via a permanently installed
double pipe feed. The pump is attached and detached
automatically; it is not necessary to enter the sump.
With its flexible rubber gasket, the HOMA coupling
system thereby ensures a secure, permanent, leak-free
seal between the pump and the pressure pipe.
Permanent wet well installation Transportable wet well installation

MOBILE WET WELL INSTALLATION

Universal installation for immersion in trenches and
sumps, for use over a limited period, emergency
operation or service operation. Can be used with a
pressure hose or pressure pipe.

STATIONARY DRY INSTALLATION –

VERTICAL OR HORIZONTAL
Flood-proof installation for pump stations with a
separate collection sump. Flange connection for suction
pipe and pressure pipe.

Permanent dry well installation

HOMA - PUMP TECHNOLOGY | 5

EFFTEC MOTORS AND MXS HYDRAULICS
MXS: IMMUNITY TO CLOGGING EFFTEC: INNOVATIVE TECHNOLOGY
Conveyed media have changed greatly in recent years, In order to achieve the highest possible overall efficien-
displaying an increasing solids content. In order to ensure cy with consequently low energy consumption we de-
reliable operation in such cases, our new MXS hydraulics veloped the new EffTec series at our HOMA R&D
rely on closed single-vane impellers with large free center. In combination with the new MXS hydraulics, the
passages. new pump generation is setting a trend in economic effi-
ciency and operational safety.
Our impellers and pump housings have been redesigned
at the HOMA R&D center and optimized with the latest The newly developed PermaCool system is future-
flow-simulation software. The result: clearly improved oriented. This permanent motor cooling now gives you
hydraulic efficiencies of up to 81 percent, with a simulta- the option of fitting the units for submerged or drywell
neously low risk of blockage and quiet running. In combi- installation. The new design - registered for a patent -
nation with HOMA‘s proven submersible-motors, the simultaneously ensures that the cooling jacket cannot be
new MXS hydraulics are setting a trend in economic clogged with solids.
efficiency and operational safety.
Together with the low winding temperature of the EffTec
motors, the PermaCool system puts a low thermal load
on all components, thus ensuring their long useful
lifetime.

6 | HOMA - PUMP TECHNOLOGY

 Reliable Monitoring - the integrated pump vibration diagnostic system HOMA VICON

Optionally available with connection for automatic HOMA FV flush valve.

THE HIGH PRESSURE CLEANING DEVICE FOR THE PUMP SUMP

VICON: ENSURING A LONG PUMP SERVICE LIFE FLUSH VALVES: KEEPING IT CLEAN
Status monitoring of electrical machines is of Pump stations require frequent cleaning as solids settle
considerable importance where quality, reliability, at the bottom or a layer of floating matter gathers on the
energy savings and targeted repair play a significant surface of the water. Expensive cleaning and
role. Submersible pumps are a special case since they maintenance measures as well as high costs due to
are immersed in the medium being handled. Carrying downtimes can arise. HOMA has the answer: the new
out repair and maintenance is often extremely difficult. HOMA FV 25 and FV 50 flush valves reliably prevent
Furthermore, high reliability without pump downtimes deposits in pump sumps. At the beginning of the
is essential. With HOMA VICON, the pump and system pumping process, part of the medium being handled is
are constantly and reliably monitored, and any faults or channelled back to the pump sump through the open
damage are detected at an early stage. flush valve. As the medium is flushed through the sump,
it stirs up deposited solids so that they can be removed.
For example, HOMA VICON registers any blockage or
damage to the hydraulics, unfavourable or defective The flushing nozzle can either be directed towards the
operating points, and bearing damage or pipework bottom of the pump sump to remove deposits, or
problems, and indicates these issues or, if necessary, alternatively, towards the surface of the waste water to
switches the pump off. By optimising the system and prevent the formation of a layer of floating matter,
detecting adverse operating conditions in good time, especially in the case of waste water with a high fat
HOMA VICON helps to save energy and reduce lifecycle content.
costs.

HOMA - PUMP TECHNOLOGY | 7

RANGES AND PUMP TYPES
MOTOR SELECTION
Speed: Dry well variant:
For the standard hydraulic range, the motors are Besides the version for submerged operation, all pumps
designed with the following speeds. are also available with cooling jacket for dry well or
non-submerged operation.
• 2900 rpm = 2-pole
• 1450 rpm = 4-pole Motor monitoring:
• 960 rpm = 6-pole All motors are supplied with temperature sensors in
the winding, bi-metallic sensors (standard) or PTC
Voltages: sensors (on request).
All specified data relate to an operating voltage of
400V/3 Ph,50 Hz. Different voltages are available on Additional monitoring devices (bearing temperature,
request. stator room moisture) on request.

Type of starting:
The motors are supplied as standard:

• up to 3,5 kW (P2) for DOL starting

• above 3,5 kW (P2) for DOL and star-delta starting

On request all motors are available for operating with

frequency converter or soft starter device.

Explosion protection:
In addition to the standard version, selected motors are
also available explosion proof according to
ATEX EX II 2 G Ex c d II B T4,(T3).

8 | HOMA - PUMP TECHNOLOGY

PUMP TYPE CODE
Range Impeller Discharge Spherical Impeller Motor frame Jacket Motor Speed Monitoring Explosion
clearance diameter size cooled power protection
(coded)

Pump Motor

MXS 2 4 48- T (U) 6 4 (C)+(S) (EX)

MX(S) 1 = 80 mm ( mm : 25 ) ( mm : 5 ) C, D, T, P, Motor with 2 = 2pole C = Oil chamber
Enclosed single F, G cooling jacket (2900 rpm) seal condition
channel impeller 2 = 100 mm 3 = 80 mm e.g. monitoring
ET: EffTec- U= open circuit 4 = 4pole probe
V(X) 3 = 150 mm 4 = 100 mm 48 = 240 mm Motor with pumped liquid (1450 rpm)
Vortex-Impeller PermaCool- cooling S = moisture
System for 6 = 6pole sensor in stator
K(X) wet- and (960 rpm) chamber
Enclosed multi dry well
channel installation

RANGES AND HYDRAULICS

HYDRAULIC SELECTION MX(S)
Enclosed single channel
Discharge and suction flange
impeller

• DN 80 For liquids containing impurities

• DN 100 and sludge with solid particles
• DN 150 or long fibers. New generation
of non clogging impellers with
Reducing adapters for different auto-coupling system hydraulic efficiency over 80%.
and valve dimensions are available.

Impeller: K(X)
Enclosed Multi Channel
A range of different impeller designs are available
Impeller
to provide optimum performance and reliability with
various liquids and operating conditions. For liquids containing impurities
and sludge with solid particles.
Impeller spherical clearance:
The pumps are available with impeller spherical clear-
ances from 80 mm to 100 mm according to pump range. V(X)
Vortex impeller
For liquids containing a high level
of impurities or fibrous matter
and containing gas.

HOMA - PUMP TECHNOLOGY | 9

DESIGN – WELL THOUGHT OUT AT EVERY STAGE

L
M
J
I

6
5

H
D I
J
D
D C

B
A
Illustration: PU-Motor with MX hydraulics

10 | HOMA - PUMP TECHNOLOGY

SUPERIOR MATERIAL QUALITY – LOWER SUSCEPTIBILITY TO FAILURE
Quality can be measured – HOMA submersible waste water pumps are characterized by the robust design,
generous dimensioning and high quality materials of all components.

A DISCHARGE G THERMAL SENSOR (BI-METAL)

With DIN/ANSI flange DN 80, DN 100 or DN 150 (PN 10) Embedded in the motor winding. PTC sensors available
on request.
B NON-CLOGGING IMPELLERS
H MOISTURE MONITORING IN STATOR CHAMBER
• Enclosed single channel impeller
(MODEL „S“)
with replaceable wear ring
Available on request.
• Enclosed multi channel impeller
with replaceable wear ring I SHAFT BEARING
• Vortex impeller
Maintenance-free, pre-lubricated ball bearings.

C SHAFT SEALS J TEMPERATURE MONITORING OF THE

Two independently working silicon-carbide mechanical SHAFT BEARINGS
seals in tandem-arrangement. On request.

D OIL CHAMBER (MODEL „C“) K CABLE JUNCTION CHAMBER

Separate large oil chamber, lubricating and cooling the- Separate junction chamber standard from 22 kW 4-pole,
mechanical seals, forming an extra safety and inspecti- below on request.
on element.
L ELECTRONIC MOISTURE SENSOR IN JUNCTION
E MOTOR CHAMBER
Three phase electric motor with 2-, 4- or 6-pole winding. Available on request.
Insulation class H (180º C), Protection IP 68.
M HOMA VICON - PUMP VIBRATION DIAGNOSTIC
EXPLOSION PROTECTION SYSTEMS
In addition to the standard version, selected mo- HOMA VICON can detect an obstruction or damage to
tors are also available explosion proof according to the hydraulics, unfavorable or defective operation
ATEX EX II 2 G Ex c d II B T4,(T3). points, bearing damages or conduit problems, it
displays these or stops the pump in the case of
F MOTOR COOLING emergency.
Motors for submerged operation are cooled by the sur-
rounding liquid. For dry well or non-submerged operati- N PRESSURE SEALED, STRAIN RELIEF CABLE
on, motors are available with a cooling jacket, providing ENTRY
a cooling circulation of water from the pump volute (mo-
del U).

MATERIALS
Motor housing Cast iron EN-GJL-250 1)
Pump housing Cast iron EN-GJL-250 1)
Impeller Cast iron EN-GJL-250 1) 2)
Wear rings Bronze 1)
Motor shaft Stainless steel
Mechanical seals Silicon-carbide / Silicon-carbide
Motor cooling jacket (model U and L) Stainless steel
Seals and O-rings NBR (Perbonane) 3)
Cable H07RN-F (Plus) 4)

1) also available in stanless steel 3) also available from FPM (vitone)

2) also available in bronze 4) screened cable on request

HOMA - PUMP TECHNOLOGY | 11

NEW EFFTEC-MOTORS: INNOVATIVE TECHNOLOGY - GREAT EFFICIENCY


J
C
D

B A

Illustration: ET-Motor with MXS-Hydraulics

12 | HOMA - PUMP TECHNOLOGY

PERMANENT MOTOR COOLING: PERMACOOL®
All models in the EffTec series are equipped with the newly developed PermaCool system. This permanent motor cooling
now gives you the option of fitting the units for submerged or drywell installation. The new design - registered for a patent
- simultaneously ensures that the cooling jacket cannot be clogged with solids. In combination with our new MXS-hydraulics,
the new EffTec series of pumps sets a trend for economic efficiency and reliability.

A DISCHARGE Together with the low winding temperature of the

EffTec motors, the PermaCool system puts a low
With DIN/ANSI flange DN 80, DN 100 or DN 150 (PN 10).
thermal load on all components, thus ensuring their
long useful lifetime.
B NON-CLOGGING IMPELLERS
• Enclosed single channel impeller with large G THERMAL SENSOR (BI-METAL)
spherical clearance. Replaceable wear ring.
• Vortex impeller. Embedded in the motor winding.
PTC sensors available on request.
C SHAFT SEALS H MOISTURE MONITORING IN STATOR
Two independently working silicon-carbide mechani- CHAMBER
cal seals in tandem-arrangement. On request.

I SHAFT BEARING
D OIL CHAMBER
Maintenance-free, prelubricated ball bearings.
Oil-filled seal chamber with possibility of control by
the inspection screw. J TEMPERATURE MONITORING OF THE
SHAFT BEARINGS
E MOTOR On request.
Three phase electric motor with 2-, 4-, or 6-pole
winding. Insulation class H (180 C), Protection IP 68. K HOMA VICON - PUMP VIBRATION DIAGNO-
STIC SYSTEMS
EXPLOSION PROTECTION HOMA VICON can detect an obstruction or damage
In addition to the standard version, selected motors to the hydraulics, unfavorable or defective operation
are also available explosion proof according to points, bearing damages or conduit problems, it dis-
ATEX EX II 2 G Ex c d II B T4,(T3). plays these or stops the pump in the case of emer-
gecy.
F MOTOR COOLING PERMACOOL

This permanent motor cooling now gives you the L PRESSURE SEALED, STRAIN RELIEF CABLE
option of fitting the units for submerged or drywell ENTRY
installation.

MATERIALS

Motor housing Cast Iron EN-GJL-250 1)

Pump housing Cast Iron EN-GJL-250 1)
Impeller Cast Iron EN-GJL-250 1) 2)
Wear ring Bronze 1)
Motor shaft Stainless Steel
Mechanical seals Siliziumkarbide / Siliziumkarbide
Cooling jacket Stainless Steel
Seals / O-Rings NBR (Perbunan) 3)
Cable H07RN-F PLUS 4)
1)
also available in stainless steel 2) also available in bronze
3) 4)
also from FPM (vitone) screened cable on request
The new innovative PermaCool motor cooling

HOMA - PUMP TECHNOLOGY | 13

DN 80 - PUMP RANGES SELECTION CHART
MXS13... -2 pole MXS13.. -4 pole
DN 80 70
60
50
DN 80 70
60
50
40
Enclosed single
40
30
Enclosed single 30

channel impeller (m)

20
channel impeller (m)
20

80 mm Ø 80 mm Ø
10
Spherical clearance 10
Spherical clearance
2900 rpm 5 1450 rpm 5
4 4

3 3

2 2

0 0
3 4 5 10 20 30 40 50 (l/s) 100
PAGE 18 3 4 5 10 20 30 40 50 (l/s) 100
PAGE 19 (m3/h)
20 50 100 (m3/h) 250 20 50 100 250

MXS13... -6 pole
DN 80 70
60
50
Enclosed single 40

channel impeller 30
(m)
20
80 mm Ø
Spherical clearance 10

960 rpm
5
4
3

PAGE 20 0
3 4 5 10 20 30 40 50 (l/s) 100

20 50 100 (m3/h) 250

V13... -2 pole V(X) 13... -4 pole

DN 80 70
60
DN 80 70
60
50 50
Vortex impeller 40 Vortex impeller 40
30 30
80 mm Ø (m) 80 mm Ø (m)
20 20
Spherical clearance Spherical clearance
2900 rpm 10 1450 rpm 10

5 5
4 4

3 3

2 2

PAGE 21 0
(l/s) 100
PAGE 22 0
3 4 5 10 20 30 40 50 (l/s) 100
3 4 5 10 20 30 40 50

20 50 100 (m /h) 250

3 20 50 100 (m3/h) 250

14 | HOMA - PUMP TECHNOLOGY

DN 100 - PUMP RANGES SELECTION CHART
MXS 23... -2 pole MXS 23... -4 pole
DN 100 DN 100
70 70
60 60
50 50
40 40
Enclosed single 30
Enclosed single 30
channel impeller (m)
20
channel impeller (m)
20

80 mm Ø 80 mm Ø
Spherical clearance 10 Spherical clearance 10

2900 rpm 5
1450 rpm
5
4 4
3 3

2 2

0 0
5 10 20 30 40 50 (l/s) 100
PAGE 23 PAGE 24 5 10 20 30 40 50 (l/s) 100

20 50 100 (m3/h) 250 20 50 100 (m3/h) 250

V 23... -2 pole V(X) 23... -4 pole

DN 100 70
60
DN 100 70
60
50 50
Vortex impeller 40 Vortex impeller 40

30 30
80 mm Ø (m) 80 mm Ø (m)
20 20
Spherical clearance Spherical clearance
2900 rpm 10 1450 rpm 10

5 5

4 4

3 3

2
2

0
0
PAGE 25 5 10 20 30 40 50 (l/s) 100 PAGE 26 5 10 20 30 40 50 (l/s) 100

20 50 100 (m3/h) 250

20 50 100 (m3/h) 250

KX 23... -4 polig MX(S) 24... -4 pole

DN 100 70
60
DN 100 70
60
50 50
Enclosed two 40 Enclosed single 40

channel impeller 30
(m)
channel impeller 30
(m)
20 20
80 mm Ø 100 mm Ø
Spherical clearance 10
Spherical clearance
10

1450 rpm 1450 rpm

5 5
4 4
3 3

2 2

PAGE 27 0 PAGE 28 0
5 10 20 30 40 50 (l/s) 100 (l/s) 100
5 10 20 30 40 50
20 50 100 (m3/h) 250
20 50 100 (m3/h) 250

MX(S) 24... -6 pole VX 24... -4 pole

DN 100 70
60
DN 100 70
60
50
Enclosed single 40 Vortex impeller 50
40
channel impeller 30
(m) 100 mm Ø 30
(m)
20
100 mm Ø Spherical clearance 20

Spherical clearance 1450 rpm

10
10
960 rpm
5
5
4
4
3
3
2
2

PAGE 29 0 PAGE 30
5 10 20 30 40 50 (l/s) 100 0
5 10 20 30 40 50 (l/s) 100
20 50 100 (m3/h) 250
20 50 100 (m3/h) 250

HOMA - PUMP TECHNOLOGY | 15

DN 150 - PUMP RANGES SELECTION CHART
MX34... -4 pole MX34... -6 pole
DN 150 70
60 DN 150 70
60
50 50
Enclosed single
Enclosed single 40 40

30 channel impeller 30
channel impeller (m) (m)

100 mm Ø
20
100 mm Ø 20

Spherical clearance Spherical clearance

10 10

1450 rpm 960 rpm

5 5
4 4
3 3

2 2

PAGE 31 0 PAGE 32 0
10 20 30 40 50 100 (l/s) 200 10 20 30 40 50 100 (l/s) 200
50 100 250 (m /h) 500
3
50 100 250 (m3/h) 500

K33... -4 pole K33... -6 pole

DN 150 70
60
DN 150 70
60
50
50
Enclosed two 40 Enclosed two 40

channel impeller 30 channel impeller 30

(m)
(m)
20
80 mm Ø 20
80 mm Ø
Spherical clearance Spherical clearance
10 10

1450 rpm 960 rpm

5 5
4 4
3 3

2 2

PAGE 33 0
PAGE 34
0
10 20 30 40 50 100 (l/s) 200
10 20 30 40 50 100 (l/s) 200
50 100 250 (m3/h) 500
50 100 250 (m3/h) 500

VX 34... -4 pole VX 34... -6 pole

DN 150 70
60
DN 150 70
60

Vortex impeller
50 Vortex impeller 50
40 40

100 mm Ø
30 100 mm Ø 30
(m) (m)
Spherical clearance 20 Spherical clearance 20

1450 rpm 960 rpm

10
10

5
5
4
4
3
3
2
2
PAGE 35 PAGE 36
0
5 10 20 30 40 50 (l/s) 100 0
5 10 20 30 40 50 (l/s) 100
20 50 100 (m3/h) 250
20 50 100 (m3/h) 250

Unlimited applications: Stanless steel submer-

sible pumps for chemically aggressive liquids
(please see separate brochure)

16 | HOMA - PUMP TECHNOLOGY

HOMA - PUMP TECHNOLOGY | 17
 DN 80 - MXS 13...-2 POLE

Enclosed single channel impeller

80 mm Ø Spherical clearance
2900 rpm

HYDRAULIC PERFORMANCE
64
H(m) Technical data WET WELL INSTALLATION
56 Curve Pump type Motor Rated Weight Weight
64
No. P1 P2 current normal Ex
H(m) (kW) (kW) (A) (kg) (kg)
48
56 a MXS 1328-T72 (C)(Ex) 11,0 9,5 18,8 120 120
b MXS 1330-T82 (C)(Ex) 13,0 11,5 22,2 123 123
40 c MXS 1332-T82 (C)(Ex) 13,0 11,5 22,2 123 123
48
d MXS 1332-P92 (C)(Ex) 16,0 14,4 27,0 178 190
e MXS 1334-P92 (C)(Ex) 16,0 14,4 27,0 178 190
32
40 f MXS 1334-P102 (C)(Ex) 22,0 19,6 36,9 178 190
g MXS 1336-P92 (C)(Ex) 16,0 14,4 27,0 180 192
24
32 h MXS 1336-P102 (C)(Ex) 22,0 19,6 36,9 180 192
i MXS 1338-P102 (C)(Ex) 22,0 19,6 36,9 180 192
16 j MXS 1338-P122 (C)(Ex) 28,0 25,4 46,3 198 210
24

8
16

0
8 0 8 16 24 32 40 48 56 (l/s)
Q
0 20 40 60 80 100 120 140 160 180 200 (m3/h)
0
0 8 16 24 32 40 48 56 (l/s)
Q
P2(KW)
0 20 40 60 80 100 120 140 160 180 200 (m3/h)

20 MOTOR OUTPUT
P2(KW)
Technical data DRY WELL INSTALLATION
16 Curve Pump type Motor Rated Weight Weight
20
No. P1 P2 current normal Ex
(kW) (kW) (A) (kg) (kg)
12
a MXS 1328-ET72 (Ex) 10,5 9,5 20,1 146 146
16
b MXS 1330-ET82 (Ex) 12,7 11,5 22,7 146 146
8 c MXS 1332-ET82 (Ex) 12,7 11,5 22,7 146 146
12 d MXS 1332-PU92 (Ex) 16,0 14,4 27,0 189 201
e MXS 1334-PU92 (Ex) 16,0 14,4 27,0 189 201
4
f MXS 1334-PU102 (Ex) 22,0 19,6 36,9 189 201
8
g MXS 1336-PU92 (Ex) 16,0 14,4 27,0 191 203
0 h MXS 1336-PU102 (Ex) 22,0 19,6 36,9 191 203
0 8 16 24 32 40 48 56 (l/s)
4 i MXS 1338-PU102 (Ex) 22,0 19,6 36,9 191 203
Q
0 20 40 60 80 100 120 140 160 180 200 (m3/h) j MXS 1338-PU122 (Ex) 28,0 25,4 46,3 211 223

0
0 8 16 24 32 40 48 56 (l/s)
Q
0 20 40 60 80 100 120 140 160 180 200 (m3/h)

18 | HOMA - PUMP TECHNOLOGY

 DN 80 - MXS13...-4 POLE

Enclosed single channel impeller

80 mm Ø Spherical clearance
1450 rpm

HYDRAULIC PERFORMANCE
24
H(m) Technical data WET WELL INSTALLATION
22
Curve Pump type Motor Rated Weight Weight
24 No. P1 P2 current normal Ex
20
H(m) (kW) (kW) (A) (kg) (kg)
22
18 a MXS 1328-C24 (C)(Ex) 1,7 1,3 3,3 74 74
20 b MXS 1330-C24 (C)(Ex) 1,7 1,3 3,3 74 74
16
c MXS 1332-D44 (C)(Ex) 3,4 2,6 6,2 80 80
18
14 d MXS 1334-D44 (C)(Ex) 3,4 2,6 6,2 80 80
16 e MXS 1336-D44 (C)(Ex) 3,4 2,6 6,2 82 82
12
f MXS 1338-D44 (C)(Ex) 3,4 2,6 6,2 82 82
14
10 g MXS 1340-T34 (C)(Ex) 3,4 2,9 5,8 117 117
128 h MXS 1342-T44 (C)(Ex) 4,4 3,7 7,5 121 121
i MXS 1344-T44 (C)(Ex) 4,4 3,7 7,5 121 121
106 j MXS 1344-T54 (C)(Ex) 5,9 5,0 9,9 131 131
k MXS 1346-T54 (C)(Ex) 5,9 5,0 9,9 131 131
84
l MXS 1346-T64 (C)(Ex) 7,7 6,5 13,1 134 134
62

40
0 8 16 24 32 40 48 56 (l/s)
2 Q
0 20 40 60 80 100 120 140 160 180 200 (m3/h)
0
0 8 16 24 32 40 48 56 (l/s)
Q
P2(KW) 0 20 40 60 80 100 120 140 160 180 200 (m3/h)

5.6
MOTOR OUTPUT
P2(KW)
4.8 Technical data DRY WELL INSTALLATION
5.6 Curve Pump type Motor Rated Weight Weight
4.0
No. P1 P2 current normal Ex
4.8 (kW) (kW) (A) (kg) (kg)
3.2
a MXS 1328-ET34 (Ex) 3,3 2,9 5,9 128 128
4.0 b MXS 1330-ET34 (Ex) 3,3 2,9 5,9 128 128
2.4
c MXS 1332-ET34 (Ex) 3,3 2,9 5,9 128 128
3.2 d MXS 1334-ET34 (Ex) 3,3 2,9 5,9 128 128
1.6
e MXS 1336-ET34 (Ex) 3,3 2,9 5,9 130 130
2.4 f MXS 1338-ET34 (Ex) 3,3 2,9 5,9 130 130
0.8
g MXS 1340-ET34 (Ex) 3,3 2,9 5,9 134 134
1.6
0 h MXS 1342-ET44 (Ex) 4,3 3,7 7,3 134 134
0 8 16 24 32 40 48 56 (l/s) MXS 1344-ET44 (Ex) 4,3 3,7 7,3 134 134
i
0.8 Q
0 20 40 60 80 100 120 140 160 180 200 (m3/h) j MXS 1344-ET54 (Ex) 6,1 5,0 10,2 134 134
k MXS 1346-ET54 (Ex) 6,1 5,0 10,2 134 134
0
0 8 16 24 32 40 48 56 (l/s) l MXS 1346-ET64 (Ex) 7,4 6,5 13,4 152 152
Q
0 20 40 60 80 100 120 140 160 180 200 (m3/h)

HOMA - PUMP TECHNOLOGY | 19

 DN 80 - MXS 13...-6 POLE

Enclosed single channel impeller

80 mm Ø Spherical clearance
960 rpm

HYDRAULIC PERFORMANCE
10
H(m) Technical data WET WELL INSTALLATION
9 Curve Pump type Motor Rated Weight Weight
10 No. P1 P2 current normal Ex
8
H(m) (kW) (kW) (A) (kg) (kg)
9 a MXS 1336-T26 (C)(Ex) 2,1 1,6 4,0 116 116
7
b MXS 1338-T26 (C)(Ex) 2,1 1,6 4,0 116 116
8
c MXS 1340-T26 (C)(Ex) 2,1 1,6 4,0 120 120
6
d MXS 1342-T26 (C)(Ex) 2,1 1,6 4,0 120 120
7
5 e MXS 1344-T26 (C)(Ex) 2,1 1,6 4,0 120 120
f MXS 1346-T26 (C)(Ex) 2,1 1,6 4,0 120 120
6
4
5
3

4
2

3
1

2
0
0 4 8 12 16 20 24 28 (l/s)
1 Q
0 10 20 30 40 50 60 70 80 90 100 (m3/h)
0
0 4 8 12 16 20 24 28 (l/s)
P2(KW)
Q
0 10 20 30 40 50 60 70 80 90 100 (m3/h)
1.8
MOTOR OUTPUT
1.6
P2(KW)
1.4 Technical data DRY WELL INSTALLATION
1.8
Curve Pump type Motor Rated Weight Weight
1.2 No. P1 P2 current normal Ex
1.6
1.0
(kW) (kW) (A) (kg) (kg)
1.4 a MXS 1336-ET26 (Ex) 1,8 1,6 3,8 148 148
0.8 b MXS 1338-ET26 (Ex) 1,8 1,6 3,8 148 148
1.2
0.6 c MXS 1340-ET26 (Ex) 1,8 1,6 3,8 152 152
1.0 d MXS 1342-ET26 (Ex) 1,8 1,6 3,8 152 152
0.4 MXS 1344-ET26 (Ex) 1,8 1,6 3,8 152 152
e
0.8
0.2 f MXS 1346-ET26 (Ex) 1,8 1,6 3,8 152 152
0.6
0
0.4 0 4 8 12 16 20 24 28 (l/s)
Q
0.2 0 10 20 30 40 50 60 70 80 90 100 (m3/h)

0
0 4 8 12 16 20 24 28 (l/s)
Q
0 10 20 30 40 50 60 70 80 90 100 (m3/h)

20 | HOMA - PUMP TECHNOLOGY

DN 80 - V13...-2 POLE

Vortex impeller
80 mm Ø Spherical clearance
2900 rpm

HYDRAULIC PERFORMANCE
64
H(m)
Technical data WET WELL INSTALLATION
64 Curve Pump type Motor Rated Weight Weight
56
H(m) No. P1 P2 current normal Ex
(kW) (kW) (A) (kg) (kg)
56
48 a V 1332-T62 (C)(Ex) 7,5 6,4 13,0 91 91
b V 1333-T62 (C)(Ex) 7,5 6,4 13,0 91 91
48
40
c V 1334-T62 (C)(Ex) 7,5 6,4 13,0 91 91
d V 1335-T72 (C)(Ex) 11,0 9,5 18,8 103 103
e V 1337-T72 (C)(Ex) 11,0 9,5 18,8 103 103
40
32
f V 1339-T82 (C)(Ex) 13,0 11,5 22,2 108 108
g V 1342-P102 (C)(Ex) 22,0 19,6 36,9 176 188
32
24 h V 1343-P102 (C)(Ex) 22,0 19,6 36,9 176 188
i V 1344-P102 (C)(Ex) 22,0 19,6 36,9 176 188
24
16 j V 1345-P122 (C)(Ex) 28,0 25,4 46,3 196 208
k V 1346-P122 (C)(Ex) 28,0 25,4 46,3 196 208

168

80
0 8 16 24 32 40 48 (l/s)
Q
0 0 40 80 120 160 (m3/h)
0 8 16 24 32 40 48 (l/s)
Q

P2(KW) 0 40 80 120 160 (m3/h)

24
MOTOR OUTPUT
P2(KW)
20
24
Technical data DRY WELL INSTALLATION
Curve Pump type Motor Rated Weight Weight
16
No. P1 P2 current normal Ex
20 (kW) (kW) (A) (kg) (kg)
a V 1332-ET62 (Ex) 7,3 6,4 12,4 119 119
12 V 1333-ET62 (Ex) 7,3 6,4 12,4 119 119
16 b
c V 1334-ET62 (Ex) 7,3 6,4 12,4 119 119
8 d V 1335-ET72 (Ex) 10,5 9,5 20,1 139 139
12
e V 1337-ET72 (Ex) 10,5 9,5 20,1 139 139
f V 1339-ET82 (Ex) 12,7 11,5 22,7 139 139
4
8 g V 1342-PU102 (Ex) 22,0 19,6 36,9 188 200
h V 1343-PU102 (Ex) 22,0 19,6 36,9 188 200
0 V 1344-PU102 (Ex) 22,0 19,6 36,9 188 200
i
4 0 8 16 24 32 40 48 (l/s)
Q j V 1345-PU122 (Ex) 28,0 25,4 46,3 208 220
0 40 80 120 160 (m3/h) k V 1346-PU122 (Ex) 28,0 25,4 46,3 208 220
0
0 8 16 24 32 40 48 (l/s)
Q
0 40 80 120 160 (m3/h)

HOMA - PUMP TECHNOLOGY | 21

DN 80 - V(X)13...-4 POLE

Vortex impeller
80 mm Ø Spherical clearance
1450 rpm

HYDRAULIC PERFORMANCE
18
H(m) Technical data WET WELL INSTALLATION
16 Curve Pump type Motor Rated Weight Weight
18
No. P1 P2 current normal Ex
H(m) (kW) (kW) (A) (kg) (kg)
14
16
a V 1334-C24 (C)(Ex) 1,7 1,3 3,3 63 64
12 b V 1336-C24 (C)(Ex) 1,7 1,3 3,3 63 64
14 c V 1344-D44 (C)(Ex) 3,4 2,6 6,2 66 67
10 d V 1346-D44 (C)(Ex) 3,4 2,6 6,2 66 67
12 e VX 1345-T44 (C)(Ex) 4,4 3,7 7,5 105 105
8 f VX 1345-T54 (C)(Ex) 5,9 5,0 9,9 118 118
10 g VX 1346-T54 (C)(Ex) 5,9 5,0 9,9 118 118
6 h VX 1346-T64 (C)(Ex) 7,7 6,5 13,1 121 121
8

4
6

2
4

0
2 0 8 16 24 32 40 (l/s)
Q
0 20 40 60 80 100 120 140 (m3/h)
0
0 8 16 24 32 40 (l/s)
Q
P2(KW)
0 20 40 60 80 100 120 140 (m3/h)
5.6

MOTOR OUTPUT
4.8
P2(KW)
5.6 Technical data DRY WELL INSTALLATION
4.0
Curve Pump type Motor Rated Weight Weight
4.8 No. P1 P2 current normal Ex
3.2 (kW) (kW) (A) (kg) (kg)
4.0 a V 1334-ET34 (Ex) 3,3 2,9 5,9 121 121
2.4
b V 1336-ET34 (Ex) 3,3 2,9 5,9 121 121
3.2 c V 1344-ET34 (Ex) 3,3 2,9 5,9 122 122
1.6
d V 1346-ET34 (Ex) 3,3 2,9 5,9 122 122
2.4 e VX 1345-ET44 (Ex) 4,3 3,7 7,3 122 122
0.8
f VX 1345-ET54 (Ex) 6,1 5,0 10,2 122 122
1.6 g VX 1346-ET54 (Ex) 6,1 5,0 10,2 122 122
0
h VX 1346-ET64 (Ex) 7,4 6,5 13,4 139 139
0 8 16 24 32 40 (l/s)
0.8 Q
0 20 40 60 80 100 120 140 (m3/h)

0
0 8 16 24 32 40 (l/s)
Q
0 20 40 60 80 100 120 140 (m3/h)

22 | HOMA - PUMP TECHNOLOGY

 DN 100 - MXS 23...-2 POLE

Enclosed single channel impeller

80 mm Ø Spherical clearance
2900 rpm

HYDRAULIC PERFORMANCE
100
H(m) Technical data WET WELL INSTALLATION
90 Curve Pump type Motor Rated Weight Weight
100 No. P1 P2 current normal Ex
H(m)
80 (kW) (kW) (A) (kg) (kg)
90
a MXS 2328-T72 (C)(Ex) 11,0 9,5 18,8 120 120
70 MXS 2330-T82 (C)(Ex) 13,0 11,5 22,2 123 123
b
80
c MXS 2332-T82 (C)(Ex) 13,0 11,5 22,2 123 123
60
d MXS 2332-P92 (C)(Ex) 16,0 14,4 27,0 178 190
70
e MXS 2334-P92 (C)(Ex) 16,0 14,4 27,0 178 190
50
60 f MXS 2334-P102 (C)(Ex) 22,0 19,6 36,9 178 190
40 g MXS 2336-P92 (C)(Ex) 16,0 14,4 27,0 180 192
50 h MXS 2336-P102 (C)(Ex) 22,0 19,6 36,9 180 192
30 i MXS 2338-P102 (C)(Ex) 22,0 19,6 36,9 180 192
40 j MXS 2338-P122 (C)(Ex) 28,0 25,4 46,3 198 210
20 k MXS 2340-F152 (C) 38,0 35,0 59,4 383 383
30 l MXS 2341-F152 (C) 38,0 35,0 59,4 383 383
10
m MXS 2342-F152 (C) 38,0 35,0 59,4 383 383
20 n MXS 2344-F152 (C) 38,0 35,0 59,4 383 383
0
0 8 24 32 40 48 56 (l/s) o MXS 2345-F162 (C) 43,0 40,0 67,5 390 390
16
10
Q p MXS 2346-F162 (C) 43,0 40,0 67,5 390 390
0 20 40 60 80 100 120 140 160 180 200 (m3/h)
0
0 8 16 24 32 40 48 56 (l/s)
Q
P2(KW)
0 20 40 60 80 100 120 140 160 180 200 (m3/h)
42
MOTOR OUTPUT
P2(KW)
36 Technical data DRY WELL INSTALLATION
42 Curve Pump type Motor Rated Weight Weight
30
No. P1 P2 current normal Ex
36 (kW) (kW) (A) (kg) (kg)
24
a MXS 2328-ET72 (Ex) 10,5 9,5 20,1 146 146
30
18
b MXS 2330-ET82 (Ex) 12,7 11,5 22,7 146 146
c MXS 2332-ET82 (Ex) 12,7 11,5 22,7 146 146
24
12 d MXS 2332-PU92 (Ex) 16,0 14,4 27,0 189 201
e MXS 2334-PU92 (Ex) 16,0 14,4 27,0 189 201
186 f MXS 2334-PU102 (Ex) 22,0 19,6 36,9 189 201
g MXS 2336-PU92 (Ex) 16,0 14,4 27,0 191 203
120 h MXS 2336-PU102 (Ex) 22,0 19,6 36,9 191 203
0 8 16 24 32 40 48 56 (l/s)
Q
i MXS 2338-PU102 (Ex) 22,0 19,6 36,9 191 203
6
0 20 40 60 80 100 120 140 160 180 200 (m3/h) j MXS 2338-PU122 (Ex) 28,0 25,4 46,3 211 223
k MXS 2340-FU152 38,0 35,0 59,4 409 409
0
(l/s) l MXS 2341-FU152 38,0 35,0 59,4 409 409
0 8 16 24 32 40 48 56
Q m MXS 2342-FU152 38,0 35,0 59,4 409 409
0 20 40 60 80 100 120 140 160 180 200 (m3/h) n MXS 2344-FU152 38,0 35,0 59,4 409 409
o MXS 2345-FU162 43,0 40,0 67,5 416 416
p MXS 2346-FU162 43,0 40,0 67,5 416 416

HOMA - PUMP TECHNOLOGY | 23

 DN 100 - MXS 23...-4 POLE

Enclosed single channel impeller

80 mm Ø Spherical clearance
1450 rpm

HYDRAULIC PERFORMANCE
32
H(m)
Technical data WET WELL INSTALLATION
28
Curve Pump type Motor Rated Weight Weight
32 No. P1 P2 current normal Ex
H(m) (kW) (kW) (A) (kg) (kg)
24 a MXS 2328-C24 (C)(Ex) 1,7 1,3 3,3 74 74
28
b MXS 2330-C24 (C)(Ex) 1,7 1,3 3,3 74 74
20 c MXS 2332-D44 (C)(Ex) 3,4 2,6 6,2 80 80
24
d MXS 2334-D44 (C)(Ex) 3,4 2,6 6,2 80 80
16
e MXS 2336-D44 (C)(Ex) 3,4 2,6 6,2 82 82
20 f MXS 2338-D44 (C)(Ex) 3,4 2,6 6,2 82 82
g MXS 2340-T34 (C)(Ex) 3,4 2,9 5,8 118 118
12
16 h MXS 2342-T44 (C)(Ex) 4,4 3,7 7,5 122 122
i MXS 2344-T44 (C)(Ex) 4,4 3,7 7,5 122 122
8 j MXS 2344-T54 (C)(Ex) 5,9 5,0 9,9 132 132
12
k MXS 2346-T54 (C)(Ex) 5,9 5,0 9,9 132 132
4 l MXS 2346-T64 (C)(Ex) 7,7 6,5 13,1 135 135
8 m MXS 2350-T64 (C)(Ex) 7,7 6,5 13,1 142 142
n MXS 2351-T64 (C)(Ex) 7,7 6,5 13,1 142 142
0
4 0 8 16 24 32 40 48 56 (l/s) o MXS 2351-ET74 (Ex) 9,8 8,5 16,8 168 168
Q p MXS 2352-ET74 (Ex) 9,8 8,5 16,8 168 168
0 20 40 60 80 100 120 140 160 180 200 (m3/h)
0
0 8 16 24 32 40 48 56 (l/s)
Q
P2(KW)
0 20 40 60 80 100 120 140 160 180 200 (m3/h)
8.4
MOTOR OUTPUT
P2(KW)
7.2
Technical data DRY WELL INSTALLATION
8.4
6.0 Curve Pump type Motor Rated Weight Weight
No. P1 P2 current normal Ex
7.2 (kW) (kW) (A) (kg) (kg)
4.8
a MXS 2328-ET34 (Ex) 3,3 2,9 5,9 128 128
6.0
3.6 b MXS 2330-ET34 (Ex) 3,3 2,9 5,9 128 128
c MXS 2332-ET34 (Ex) 3,3 2,9 5,9 128 128
4.8
2.4 d MXS 2334-ET34 (Ex) 3,3 2,9 5,9 128 128
e MXS 2336-ET34 (Ex) 3,3 2,9 5,9 130 130
3.6
1.2 f MXS 2338-ET34 (Ex) 3,3 2,9 5,9 130 130
g MXS 2340-ET34 (Ex) 3,3 2,9 5,9 135 135
2.40 h MXS 2342-ET44 (Ex) 4,3 3,7 7,3 135 135
0 8 16 24 32 40 48 56 (l/s)
Q i MXS 2344-ET44 (Ex) 4,3 3,7 7,3 135 135
1.2 0 20 40 60 80 100 120 140 160 180 200 (m3/h) j MXS 2344-ET54 (Ex) 6,1 5,0 10,2 135 135
k MXS 2346-ET54 (Ex) 6,1 5,0 10,2 135 135
0
0 8 16 24 32 40 48 56 (l/s) l MXS 2346-ET64 (Ex) 7,4 6,5 13,4 153 153
Q m MXS 2350-ET64 (Ex) 7,4 6,5 13,4 168 168
0 20 40 60 80 100 120 140 160 180 200 (m3/h) n MXS 2351-ET64 (Ex) 7,4 6,5 13,4 168 168
o MXS 2351-ET74 (Ex) 9,8 8,5 16,8 168 168
p MXS 2352-ET74 (Ex) 9,8 8,5 16,8 168 168

24 | HOMA - PUMP TECHNOLOGY

DN 100 - V23...-2 POLE

Vortex impeller
80 mm Ø Spherical clearance
2900 rpm

HYDRAULIC PERFORMANCE
64
H(m)
Technical data WET WELL INSTALLATION
56
Curve Pump type Motor Rated Weight Weight
64
No. P1 P2 current normal Ex
H(m)
(kW) (kW) (A) (kg) (kg)
56
48 a V 2332-T62 (C)(Ex) 7,5 6,4 13,0 93 93
b V 2333-T62 (C)(Ex) 7,5 6,4 13,0 93 93
40
48 c V 2334-T62 (C)(Ex) 7,5 6,4 13,0 93 93
d V 2335-T72 (C)(Ex) 11,0 9,5 18,8 105 105
e V 2337-T72 (C)(Ex) 11,0 9,5 18,8 105 105
40
32
f V 2339-T82 (C)(Ex) 13,0 11,5 22,2 110 110
g V 2342-P102 (C)(Ex) 22,0 19,6 36,9 178 190
24
32 h V 2343-P102 (C)(Ex) 22,0 19,6 36,9 178 190
i V 2344-P102 (C)(Ex) 22,0 19,6 36,9 178 190
16
24 j V 2345-P122 (C)(Ex) 28,0 25,4 46,3 198 210
k V 2346-P122 (C)(Ex) 28,0 25,4 46,3 198 210

168

0
8
0 8 16 24 32 40 48 (l/s)
Q
0 40 80 120 160 (m3/h)
0
0 8 16 24 32 40 48 (l/s)
Q
P2(KW) 0 40 80 120 160 (m3/h)
24
MOTOR OUTPUT
P2(KW)
20
24
Technical data DRY WELL INSTALLATION
Curve Pump type Motor Rated Weight Weight
16 No. P1 P2 current normal Ex
20 (kW) (kW) (A) (kg) (kg)
a V 2332-ET62 (Ex) 7,3 6,4 12,4 121 121
12
16 b V 2333-ET62 (Ex) 7,3 6,4 12,4 121 121
c V 2334-ET62 (Ex) 7,3 6,4 12,4 121 121
8 d V 2335-ET72 (Ex) 10,5 9,5 20,1 141 141
12
e V 2337-ET72 (Ex) 10,5 9,5 20,1 141 141
4 f V 2339-ET82 (Ex) 12,7 11,5 22,7 141 141
8 g V 2342-PU102 (Ex) 22,0 19,6 36,9 190 202
h V 2343-PU102 (Ex) 22,0 19,6 36,9 190 202
0
4 0 8 16 24 32 40 48 (l/s) i V 2344-PU102 (Ex) 22,0 19,6 36,9 190 202
Q j V 2345-PU122 (Ex) 28,0 25,4 46,3 210 222
0 40 80 120 160 (m3/h)
k V 2346-PU122 (Ex) 28,0 25,4 46,3 210 222
0
0 8 16 24 32 40 48 (l/s)
Q
0 40 80 120 160 (m3/h)

HOMA - PUMP TECHNOLOGY | 25

 DN 100 - V(X) 23...-4 POLE

Vortex impeller
80 mm Ø Spherical clearance
1450 rpm

HYDRAULIC PERFORMANCE
18
H(m) Technical data WET WELL INSTALLATION
16 Curve Pump type Motor Rated Weight Weight
18 No. P1 P2 current normal Ex
H(m) (kW) (kW) (A) (kg) (kg)
14
16 a V 2334-C24 (C)(Ex) 1,7 1,3 3,3 65 65
12
b V 2336-C24 (C)(Ex) 1,7 1,3 3,3 65 65
14 c V 2344-D44 (C)(Ex) 3,4 2,6 6,2 68 68
10
d V 2346-D44 (C)(Ex) 3,4 2,6 6,2 68 68
12 e VX 2345-T44 (C)(Ex) 4,4 3,7 7,5 107 107
f VX 2345-T54 (C)(Ex) 5,9 5,0 9,9 120 120
8
10 g VX 2346-T54 (C)(Ex) 5,9 5,0 9,9 120 120
6
h VX 2346-T64 (C)(Ex) 7,7 6,5 13,1 123 123
8

4
6

2
4

0
2 0 8 16 24 32 (l/s)
Q
0 20 40 60 80 100 120 (m3/h)
0
0 8 16 24 32 (l/s)
Q
P2(KW)
0 20 40 60 80 100 120 (m3/h)
5.6

MOTOR OUTPUT
4.8
P2(KW)
5.6
Technical data DRY WELL INSTALLATION
4.0 Curve Pump type Motor Rated Weight Weight
4.8 No. P1 P2 current normal Ex
3.2 (kW) (kW) (A) (kg) (kg)
a V 2334-ET34 (Ex) 3,3 2,9 5,9 123 123
4.0
2.4 b V 2336-ET34 (Ex) 3,3 2,9 5,9 123 123
c V 2344-ET34 (Ex) 3,3 2,9 5,9 124 124
3.2
1.6 d V 2346-ET34 (Ex) 3,3 2,9 5,9 124 124
e VX 2345-ET44 (Ex) 4,3 3,7 7,3 124 124
2.4
0.8 f VX 2345-ET54 (Ex) 6,1 5,0 10,2 124 124
g VX 2346-ET54 (Ex) 6,1 5,0 10,2 124 124
1.6
0 h VX 2346-ET64 (Ex) 7,4 6,5 13,4 141 141
0 8 16 24 32 (l/s)
0.8 Q
0 20 40 60 80 100 120 (m3/h)

0
0 8 16 24 32 (l/s)
Q
0 20 40 60 80 100 120 (m3/h)

26 | HOMA - PUMP TECHNOLOGY

 DN 100 - KX 23...-4 POLIG

Enclosed two channel impeller

80 mm Ø Spherical clearance
1450 rpm

HYDRAULIC PERFORMANCE
60
H(m) Technical data WET WELL INSTALLATION
54 Curve Pump type Motor Rated Weight Weight
60
No. P1 P2 current normal Ex
H(m)
48 (kW) (kW) (A) (kg) (kg)
54

42 a KX 2360-F114 (C)(Ex) 25,0 22,0 44,0 429 429

48
b KX 2360-F124 (C)(Ex) 29,1 25,6 51,4 451 451
36 c KX 2362-F124 (C)(Ex) 29,1 25,6 51,4 452 452
42
d KX 2362-F134 (C)(Ex) 32,8 29,2 59,0 467 467
30
e KX 2364-F124 (C)(Ex) 29,1 25,6 51,4 453 453
36
f KX 2364-F134 (C)(Ex) 32,8 29,2 59,0 468 468
24
30 g KX 2366-F134 (C)(Ex) 32,8 29,2 59,0 469 469
h KX 2366-F144 (C)(Ex) 37,1 33,0 67,1 484 484
18
24 i KX 2368-F144 (C)(Ex) 37,1 33,0 67,1 485 485
12 j KX 2368-G154 (C)(Ex) 41,1 37,4 70,4 502 502
18 k KX 2370-G144 (C)(Ex) 37,1 33,0 67,1 486 486
6 l KX 2370-G154 (C)(Ex) 41,1 37,4 70,4 503 503
12 m KX 2372-G154 (C)(Ex) 41,1 37,4 70,4 504 504
0 n KX 2372-G174 (C)(Ex) 50,1 46,1 84,3 532 532
6 0 16 32 48 64 80 96 (l/s)
Q
0 40 80 120 160 200 240 280 320 360 (m3/h)
0
0 16 32 48 64 80 96 (l/s)
Q
P2(KW) 0 40 80 120 160 200 240 280 320 360 (m3/h)

42 MOTOR OUTPUT
P2(KW)
36 Technical data DRY WELL INSTALLATION
42 Curve Pump type Motor Rated Weight Weight
30 No. P1 P2 current normal Ex
(kW) (kW) (A) (kg) (kg)
36
24 a KX 2360-FU114 (Ex) 25,0 22,0 44,0 450 450
b KX 2360-FU124 (Ex) 29,1 25,6 51,4 477 477
30
18 c KX 2362-FU124 (Ex) 29,1 25,6 51,4 478 478
24
d KX 2362-FU134 (Ex) 32,8 29,2 59,0 493 493
12 e KX 2364-FU124 (Ex) 29,1 25,6 51,4 479 479
18 f KX 2364-FU134 (Ex) 32,8 29,2 59,0 494 494
6
g KX 2366-FU134 (Ex) 32,8 29,2 59,0 495 495
120 h KX 2366-FU144 (Ex) 37,1 33,0 67,1 510 510
0 16 32 48 64 80 96 (l/s) i KX 2368-FU144 (Ex) 37,1 33,0 67,1 511 511
6 Q j KX 2368-GU154 (Ex) 41,1 37,4 70,4 528 528
0 40 80 120 160 200 240 280 320 360 (m3/h) k KX 2370-GU144 (Ex) 37,1 33,0 67,1 512 512
0 l KX 2370-GU154 (Ex) 41,1 37,4 70,4 529 529
0 16 32 48 64 80 96 (l/s) m KX 2372-GU154 (Ex) 41,1 37,4 70,4 530 530
Q
320
n KX 2372-GU174 (Ex) 50,1 46,1 84,3 561 561
0 40 80 120 160 200 240 280 360 (m3/h)

HOMA - PUMP TECHNOLOGY | 27

 DN 100 - MX(S) 24...-4 POLE

Enclosed single channel impeller

100 mm Ø Spherical clearance
1450 rpm

HYDRAULIC PERFORMANCE
40
H(m) Technical data WET WELL INSTALLATION
36 Curve Pump type Motor Rated Weight Weight
40
No. P1 P2 current normal Ex
H(m)
32 (kW) (kW) (A) (kg) (kg)
36
a M 2432-T34 (C)(Ex) 3,4 2,9 5,8 102 102
28 MX 2436-T34 (C)(Ex) 3,4 2,9 5,8 104 104
32
b
c MX 2438-T34 (C)(Ex) 3,4 2,9 5,8 104 104
24
28 d MX 2438-T44 (C)(Ex) 4,4 3,7 7,5 108 108
e MXS 2442-T44 (C)(Ex) 4,4 3,7 7,5 129 129
20
24 f MXS 2442-T54 (C)(Ex) 5,9 5,0 9,9 139 139
16 g MXS 2444-T54 (C)(Ex) 5,9 5,0 9,9 139 139
20 h MXS 2446-T54 (C)(Ex) 5,9 5,0 9,9 139 139
12 i MXS 2446-T64 (C)(Ex) 7,7 6,5 13,1 142 142
16 j MXS 2450-ET74 (Ex) 9,8 8,5 16,8 184 184
8 k MXS 2450-P84 (C)(Ex) 14,0 12,2 23,0 209 221
12 l MXS 2454-P84 (C)(Ex) 14,0 12,2 23,0 209 221
4 m MXS 2457-P84 (C)(Ex) 14,0 12,2 23,0 209 221
8
n MXS 2457-P94 (C)(Ex) 17,0 14,6 28,8 209 221
0
o MXS 2460-P94 (C)(Ex) 17,0 14,6 28,8 209 221
4 0 16 32 48 64 80 96 112 (l/s)
Q p MXS 2460-P104 (C)(Ex) 22,0 19,3 36,5 231 243
0 40 80 120 160 200 240 280 320 360 400 (m3/h)
0
0 16 32 48 64 80 96 112 (l/s)
Q
P2(KW) 0 40 80 120 160 200 240 280 320 360 400 (m3/h)
18
MOTOR OUTPUT
16
P2(KW)
Technical data DRY WELL INSTALLATION
14
18
Curve Pump type Motor Rated Weight Weight
12
16 No. P1 P2 current normal Ex
(kW) (kW) (A) (kg) (kg)
10
14 a M 2432-ET34 (Ex) 3,3 2,9 5,9 138 138
b MX 2436-ET34 (Ex) 3,3 2,9 5,9 138 138
128
c MX 2438-ET34 (Ex) 3,3 2,9 5,9 138 138
6
10 d MX 2438-ET44 (Ex) 4,3 3,7 7,3 138 138
e MXS 2442-ET44 (Ex) 4,3 3,7 7,3 142 142
84
f MXS 2442-ET54 (Ex) 6,1 5,0 10,2 142 142
2
6 g MXS 2444-ET54 (Ex) 6,1 5,0 10,2 142 142
0 h MXS 2446-ET54 (Ex) 6,1 5,0 10,2 142 142
4
0 16 32 48 64 80 96 112 (l/s) i MXS 2446-ET64 (Ex) 7,4 6,5 13,4 160 160
Q
2 0 40 80 120 160 200 240 280 320 360 400 (m3/h) j MXS 2450-ET74 (Ex) 9,8 8,5 16,8 184 184
k MXS 2450-PU84 (Ex) 14,0 12,2 23,0 219 231
0
96 (l/s)
l MXS 2454-PU84 (Ex) 14,0 12,2 23,0 219 231
0 16 32 48 64 80 112
Q m MXS 2457-PU84 (Ex) 14,0 12,2 23,0 219 231
0 40 80 120 160 200 240 280 320 360 400 (m3/h) n MXS 2457-PU94 (Ex) 17,0 14,6 28,8 219 231
o MXS 2460-PU94 (Ex) 17,0 14,6 28,8 219 231
p MXS 2460-PU104 (Ex) 22,0 19,3 36,5 244 256

28 | HOMA - PUMP TECHNOLOGY

 DN 100 - MX(S) 24...-6 POLE

Enclosed single channel impeller

100 mm Ø Spherical clearance
960 rpm

HYDRAULIC PERFORMANCE
16
H(m) Technical data WET WELL INSTALLATION
14 Curve Pump type Motor Rated Weight Weight
16 No. P1 P2 current normal Ex
H(m) (kW) (kW) (A) (kg) (kg)
12
a MX 2436-T36 (C)(Ex) 3,0 2,3 5,4 104 104
14
b MX 2438-T36 (C)(Ex) 3,0 2,3 5,4 104 104
10 c MXS 2444-T26 (C)(Ex) 2,1 1,6 4,0 125 125
12
d MXS 2446-T36 (C)(Ex) 3,0 2,3 5,4 125 125
8 e MXS 2450-T46 (C)(Ex) 4,0 3,1 7,3 145 145
10 f MXS 2454-T46 (C)(Ex) 4,0 3,1 7,3 145 145
g MXS 2454-T56 (C)(Ex) 5,0 4,0 9,6 155 155
6
h MXS 2457-T56 (C)(Ex) 5,0 4,0 9,6 155 155
8
i MXS 2457-T66 (C)(Ex) 6,0 4,9 11,5 158 158
4 j MXS 2460-T66 (C)(Ex) 6,0 4,9 11,5 158 158
6

2
4

0
2 0 8 16 24 32 40 48 56 (l/s)
Q
0 20 40 60 80 100 120 140 160 180 200 (m3/h)
0
0 8 16 24 32 40 48 56 (l/s)
P2(KW) Q
0 20 40 60 80 100 120 140 160 180 200 (m3/h)
5.6
MOTOR OUTPUT
4.8
P2(KW)
Technical data DRY WELL INSTALLATION
5.6
4.0 Curve Pump type Motor Rated Weight Weight
No. P1 P2 current normal Ex
4.8
3.2 (kW) (kW) (A) (kg) (kg)
a MX 2436-ET36 (Ex) 2,7 2,3 4,9 156 156
4.0
2.4 b MX 2438-ET36 (Ex) 2,7 2,3 4,9 156 156
c MXS 2444-ET26 (Ex) 1,8 1,6 3,8 160 160
3.2
1.6 d MXS 2446-ET36 (Ex) 2,7 2,3 4,9 160 160
e MXS 2450-ET46 (Ex) 3,6 3,1 6,6 184 184
2.4
0.8
f MXS 2454-ET46 (Ex) 3,6 3,1 6,6 184 184
g MXS 2454-ET56 (Ex) 4,7 4,0 8,3 184 184
1.60
0 8 16 24 32 40 48 56 (l/s) h MXS 2457-ET56 (Ex) 4,7 4,0 8,3 184 184
Q i MXS 2457-ET66 (Ex) 5,9 4,9 10,3 184 184
0.8 20 60 80 120 140 (m3/h)
0 40 100 160 180 200 j MXS 2460-ET66 (Ex) 5,9 4,9 10,3 184 184
0
0 8 16 24 32 40 48 56 (l/s)
Q
0 20 40 60 80 100 120 140 160 180 200 (m3/h)

HOMA - PUMP TECHNOLOGY | 29

DN 100 - VX 24...-4 POLE

Vortex impeller
100 mm Ø Spherical clearance
1450 rpm

HYDRAULIC PERFORMANCE
32
H(m)
Technical data WET WELL INSTALLATION
28
Curve Pump type Motor Rated Weight Weight
32 No. P1 P2 current normal Ex
H(m) (kW) (kW) (A) (kg) (kg)
24
28 a VX 2436-D54 (C)(Ex) 4,0 3,2 7,3 78 78
b VX 2439-D54 (C)(Ex) 4,0 3,2 7,3 78 78
20 c VX 2440-T54 (C)(Ex) 5,9 5,0 9,9 123 123
24
d VX 2442-T54 (C)(Ex) 5,9 5,0 9,9 123 123
e VX 2442-T64 (C)(Ex) 7,7 6,5 13,1 126 126
16
20 f VX 2444-T64 (C)(Ex) 7,7 6,5 13,1 126 126
g VX 2444-ET74 (Ex) 9,8 8,5 16,8 144 144
12 h VX 2446-ET74 (Ex) 9,8 8,5 16,8 144 144
16
i VX 2446-P84 (C)(Ex) 14,0 12,2 23,0 177 189
8 j VX 2452-P84 (C)(Ex) 14,0 12,2 23,0 205 217
12
k VX 2454-P84 (C)(Ex) 14,0 12,2 23,0 205 217
l VX 2454-P94 (C)(Ex) 17,0 14,6 28,8 205 217
4
8 m VX 2456-P94 (C)(Ex) 17,0 14,6 28,8 205 217
n VX 2456-P104 (C)(Ex) 22,0 19,3 36,5 227 239
0 o VX 2458-P94 (C)(Ex) 17,0 14,6 28,8 205 217
4
0 8 16 24 32 40 48 56 64 (l/s)
Q
p VX 2458-P104 (C)(Ex) 22,0 19,3 36,5 227 239
0 20 40 60 80 100 120 140 160 180 200 220 (m3/h)
0
0 8 16 24 32 40 48 56 64 (l/s)
Q
P2(KW) 0 20 40 60 80 100 120 140 160 180 200 220 (m3/h)
22
MOTOR OUTPUT
20
P2(KW)
18 Technical data DRY WELL INSTALLATION
22
16 Curve Pump type Motor Rated Weight Weight
20 No. P1 P2 current normal Ex
14 (kW) (kW) (A) (kg) (kg)
18
12 a VX 2436-ET44 (Ex) 4,3 3,7 7,3 123 123
16
10 b VX 2439-ET44 (Ex) 4,3 3,7 7,3 123 123
14 c VX 2440-ET54 (Ex) 6,1 5,0 10,2 126 126
8
12 d VX 2442-ET54 (Ex) 6,1 5,0 10,2 126 126
6 VX 2442-ET64 (Ex) 7,4 6,5 13,4 144 144
e
10
4 f VX 2444-ET64 (Ex) 7,4 6,5 13,4 144 144
8
2 g VX 2444-ET74 (Ex) 9,8 8,5 16,8 144 144
6 h VX 2446-ET74 (Ex) 9,8 8,5 16,8 144 144
0
4 0 8 16 24 32 40 48 56 64 (l/s)
i VX 2446-PU84 (Ex) 14,0 12,2 23,0 187 199
Q j VX 2452-PU84 (Ex) 14,0 12,2 23,0 215 227
2 0 20 40 60 80 100 120 140 160 180 200 220 (m3/h) k VX 2454-PU84 (Ex) 14,0 12,2 23,0 215 227
0 l VX 2454-PU94 (Ex) 17,0 14,6 28,8 215 227
0 8 16 24 32 40 48 56 64 (l/s)
Q
m VX 2456-PU94 (Ex) 17,0 14,6 28,8 215 227
0 20 40 60 80 100 120 140 160 180 200 220 (m3/h) n VX 2456-PU104 (Ex) 22,0 19,3 36,5 240 252
o VX 2458-PU94 (Ex) 17,0 14,6 28,8 215 227
p VX 2458-PU104 (Ex) 22,0 19,3 36,5 240 252

30 | HOMA - PUMP TECHNOLOGY

 DN 150 - MX(S) 34...-4 POLE

Enclosed single channel impeller

100 mm Ø Spherical clearance
1450 rpm

HYDRAULIC PERFORMANCE
60
H(m)
Technical data WET WELL INSTALLATION
54 Curve Pump type Motor Rated Weight Weight
60 No. P1 P2 current normal Ex
H(m)
48 (kW) (kW) (A) (kg) (kg)
54 b MXS3450-P84 (C)(Ex) 14,0 12,2 23,0 227 239
42 c MXS3454-P84 (C) (Ex) 14,0 12,2 23,0 227 239
48
d MXS3457-P94 (C) (Ex) 17,0 14,6 28,8 227 239
36
e MXS3457-P104 (C) (Ex) 22,0 19,3 36,5 249 261
42
f MXS3460-P94 (C)(Ex) 17,0 14,6 28,8 227 239
30
g MXS3460-P104 (C) (Ex) 22,0 19,3 36,5 249 261
36
24
h MX 3468-F114 (C)(Ex) 25,0 22,0 44,0 388 388
30 i MX 3470-F124 (C)(Ex) 29,1 25,6 51,4 410 410
18 j MX 3472-F134 (C)(Ex) 32,8 29,2 59,0 420 420
24 k MX 3474-F144 (C)(Ex) 37,1 33,0 67,1 430 430
12
18
6
12
0
0 20 40 60 80 100 120 140 (l/s)
6
Q
0 40 80 120 160 200 240 280 320 360 400 440 480 520 (m3/h)
0
0 20 40 60 80 100 120 140 (l/s)
Q
P2(KW) 0 40 80 120 160 200 240 280 320 360 400 440 480 520 (m3/h)

42 MOTOR OUTPUT
P2(KW)
36 Technical data DRY WELL INSTALLATION
42 Curve Pump type Motor Rated Weight Weight
30 No. P1 P2 current normal Ex
(kW) (kW) (A) (kg) (kg)
36
24 MXS3450-ET74 (Ex) 9,8 8,5 16,8 202 202
a
30 b MXS3450-PU84 (Ex) 14,0 12,2 23,0 237 249
18
c MXS3454-PU84 (Ex) 14,0 12,2 23,0 237 249
24 d MXS3457-PU94 (Ex) 17,0 14,6 28,8 237 249
12
e MXS3457-PU104 (Ex) 22,0 19,3 36,5 262 274
186 f MXS3460-PU94 (Ex) 17,0 14,6 28,8 237 249
g MXS3460-PU104 (Ex) 22,0 19,3 36,5 262 274
120 h MX 3468-FU114 (Ex) 25,0 22,0 44,0 409 409
0 20 40 60 80 100 120 140 (l/s) i MX 3470-FU124 (Ex) 29,1 25,6 51,4 436 436
Q
6 j MX 3472-FU134 (Ex) 32,8 29,2 59,0 436 436
0 40 80 120 160 200 240 280 320 360 400 440 480 520 (m3/h)
k MX 3474-FU144 (Ex) 37,1 33,0 67,1 456 456
0
0 20 40 60 80 100 120 140 (l/s)
Q
0 40 80 120 160 200 240 280 320 360 400 440 480 520 (m3/h)

HOMA - PUMP TECHNOLOGY | 31

 DN 150 - MX(S) 34...-6 POLE

Enclosed single channel impeller

100 mm Ø Spherical clearance
960 rpm

HYDRAULIC PERFORMANCE
24
H(m) Technical data WET WELL INSTALLATION
22 Curve Pump type Motor Rated Weight Weight
24 No. P1 P2 current normal Ex
20
H(m) (kW) (kW) (A) (kg) (kg)
22
18 a MXS3450-T46 (C)(Ex) 4,0 3,1 7,3 163 163
20 b MXS3454-T46 (C)(Ex) 4,0 3,1 7,3 163 163
16
c MXS3454-T56 (C)(Ex) 5,0 4,0 9,6 173 173
18
14 d MXS3457-T56 (C)(Ex) 5,0 4,0 9,6 173 173
16 e MXS3457-T66 (C)(Ex) 6,0 4,9 11,5 176 176
12
f MXS3460-T66 (C)(Ex) 6,0 4,9 11,5 176 176
14 g MX 3468-P76 (C)(Ex) 9,0 7,3 16,3 260 272
10

12 h MX 3470-P76 (C)(Ex) 9,0 7,3 16,3 260 272

8
i MX 3472-P86 (C)(Ex) 12,0 10,0 22,4 285 297
106 j MX 3474-P86 (C)(Ex) 12,0 10,0 22,4 285 297

84

62

40
0 16 32 48 64 80 96 112 (l/s)
2 Q
0 40 80 120 160 200 240 280 320 360 400 (m3/h)
0
0 16 32 48 64 80 96 112 (l/s)
P2(KW) Q
0 40 80 120 160 200 240 280 320 360 400 (m3/h)
8.4 MOTOR OUTPUT
P2(KW)
7.2 Technical data DRY WELL INSTALLATION
8.4 Curve Pump type Motor Rated Weight Weight
6.0 No. P1 P2 current normal Ex
7.2 (kW) (kW) (A) (kg) (kg)
4.8
a MXS3450-ET46 (Ex) 3,6 3,1 6,6 202 202
6.0 b MXS3454-ET46 (Ex) 3,6 3,1 6,6 202 202
3.6
c MXS3454-ET56 (EX) 4,7 4,0 8,3 202 202
4.8 d MXS3457-ET56 (Ex) 4,7 4,0 8,3 202 202
2.4
e MXS3457-ET66 (Ex) 5,9 4,9 10,3 202 202
3.6
1.2 f MXS3460-ET66 (Ex) 5,9 4,9 10,3 202 202
g MX 3468-PU76 (Ex) 9,0 7,3 16,3 267 279
2.40 h MX 3470-PU76 (Ex) 9,0 7,3 16,3 267 279
0 16 32 48 64 80 96 112 (l/s) i MX 3472-PU86 (Ex) 12,0 10,0 22,4 292 304
1.2 Q j MX 3474-PU86 (Ex) 12,0 10,0 22,4 292 304
0 40 80 120 160 200 240 280 320 360 400 (m3/h)
0
0 16 32 48 64 80 96 112 (l/s)
Q
0 40 80 120 160 200 240 280 320 360 400 (m3/h)

32 | HOMA - PUMP TECHNOLOGY

DN 150 - K33...-4 POLE

Enclosed two channel impeller

80 mm Ø Spherical clearance
1450 rpm

HYDRAULIC PERFORMANCE
50
H(m)
Technical data WET WELL INSTALLATION
45 Curve Pump type Motor Rated Weight Weight
50 No. P1 P2 current normal Ex
H(m) (kW) (kW) (A) (kg) (kg)
40
45
a K 3352-P94 (C)(Ex) 17,0 14,6 28,8 216 228
35 b K 3354-P94 (C)(Ex) 17,0 14,6 28,8 216 228
40
c K 3356-P104 (C)(Ex) 22,0 19,3 36,5 234 246
30
35
d K 3358-P104 (C)(Ex) 22,0 19,3 36,5 234 246
e K 3360-F124 (C)(Ex) 29,1 25,6 51,4 418 418
25
30 f K 3362-F124 (C)(Ex) 29,1 25,6 51,4 418 418
g K 3362-F134 (C)(Ex) 32,8 29,2 59,0 428 428
20
25 h K 3364-F134 (C)(Ex) 32,8 29,2 59,0 428 428
15 i K 3364-F144 (C)(Ex) 37,1 33,0 67,1 449 449
20 j K 3366-F144 (C)(Ex) 37,1 33,0 67,1 449 449
10 k K 3366-G154 (C)(Ex) 41,1 37,4 70,4 486 486
15 l K 3368-G154 (C)(Ex) 41,1 37,4 70,4 486 486
5 m K 3370-G174 (C)(Ex) 50,1 46,1 84,3 528 528
10
0
5 0 20 40 60 80 100 120 140 160 (l/s)
Q
0 80 160 240 320 400 480 560 (m3/h)
0
0 20 40 60 80 100 120 140 160 (l/s)
Q
P2(KW) 0 80 160 240 320 400 480 560 (m3/h)
64

MOTOR OUTPUT
56
P2(KW)
64 Technical data DRY WELL INSTALLATION
48
Curve Pump type Motor Rated Weight Weight
56 No. P1 P2 current normal Ex
40
(kW) (kW) (A) (kg) (kg)
48 a K 3352-PU94 (Ex) 17,0 14,6 28,8 224 236
32
b K 3354-PU94 (Ex) 17,0 14,6 28,8 224 236
40
24 c K 3356-PU104 (Ex) 22,0 19,3 36,5 244 256
32
d K 3358-PU104 (Ex) 22,0 19,3 36,5 244 256
16 e K 3360-FU124 (Ex) 29,1 25,6 51,4 444 493
24 f K 3362-FU124 (Ex) 29,1 25,6 51,4 444 493
8
g K 3362-FU134 (Ex) 32,8 29,2 59,0 454 503
16
0 h K 3364-FU134 (Ex) 32,8 29,2 59,0 454 503
0 20 40 60 80 100 120 140 160 (l/s) i K 3364-FU144 (Ex) 37,1 33,0 67,1 475 524
8 Q j K 3366-FU144 (Ex) 37,1 33,0 67,1 475 524
0 80 160 240 320 400 480 560 (m3/h)
k K 3366-GU154 (Ex) 41,1 37,4 70,4 512 555
0
l K 3368-GU154 (Ex) 41,1 37,4 70,4 512 555
0 20 40 60 80 100 120 140 160 (l/s)
Q m K 3370-GU174 (Ex) 50,1 46,1 84,3 557 610
0 80 160 240 320 400 480 560 (m3/h)

HOMA - PUMP TECHNOLOGY | 33

DN 150 - K33...-6 POLE

Enclosed two channel impeller

80 mm Ø Spherical clearance
960 rpm

HYDRAULIC PERFORMANCE
32
H(m)
Technical data WET WELL INSTALLATION
28
Curve Pump type Motor Rated Weight Weight
No. P1 P2 current normal Ex
32
(kW) (kW) (A) (kg) (kg)
H(m)
24 a K 3366-P96 (C)(Ex) 16,0 13,6 29,4 280 292
28
b K 3368-P96 (C)(Ex) 16,0 13,6 29,4 280 292
20 c K 3370-P96 (C)(Ex) 16,0 13,6 29,4 280 292
24

16
20

12

16

12

8
0
0 20 40 60 80 100 120 140 (l/s)
4 Q
0 40 80 120 160 200 240 280 320 360 400 440 480 (m3/h)

0
0 20 40 60 80 100 120 140 (l/s)
P2(KW) Q
24 0 40 80 120 160 200 240 280 320 360 400 440 480 (m3/h)

MOTOR OUTPUT
20
P2(KW) Technical data DRY WELL INSTALLATION
24 Curve Pump type Motor Rated Weight Weight
16
No. P1 P2 current normal Ex
(kW) (kW) (A) (kg) (kg)
20
12 a K 3366-PU96 (Ex) 16,0 13,6 29,4 288 300
b K 3368-PU96 (Ex) 16,0 13,6 29,4 288 300
16
8
c K 3370-PU96 (Ex) 16,0 13,6 29,4 288 300

12
4

8
0
0 20 40 60 80 100 120 140 (l/s)
Q
4
0 40 80 120 160 200 240 280 320 360 400 440 480 (m3/h)

0
0 20 40 60 80 100 120 140 (l/s)
Q
0 40 80 120 160 200 240 280 320 360 400 440 480 (m3/h)

34 | HOMA - PUMP TECHNOLOGY

DN 150 - VX 34...-4 POLE

Vortex impeller
100 mm Ø Spherical clearance
1450 rpm

HYDRAULIC PERFORMANCE
48
H(m) Technical data WET WELL INSTALLATION
44
Curve Pump type Motor Rated Weight Weight
48
40 No. P1 P2 current normal Ex
H(m) (kW) (kW) (A) (kg) (kg)
44
36
a VX 3460-F114 (C)(Ex) 25,0 22,0 44,0 426 426
40
32
b VX 3460-F124 (C)(Ex) 29,1 25,6 51,4 448 448
c VX 3463-F124 (C)(Ex) 29,1 25,6 51,4 448 448
36
28 d VX 3463-F134 (C)(Ex) 32,8 29,2 59,0 463 463
32
24 e VX 3466-F134 (C)(Ex) 32,8 29,2 59,0 463 463
f VX 3466-F144 (C)(Ex) 37,1 33,0 67,1 478 478
28
20 g VX 3468-F144 (C)(Ex) 37,1 33,0 67,1 478 478
24
16
h VX 3468-G154 (C)(Ex) 41,1 37,4 70,4 495 495
i VX 3470-F144 (C)(Ex) 37,1 33,0 67,1 478 478
12
20 j VX 3470-G174 (C)(Ex) 50,1 46,1 84,3 523 523
k VX 3471-G154 (C)(Ex) 41,1 37,4 70,4 495 495
168
l VX 3471-G174 (C)(Ex) 50,1 46,1 84,3 523 523
124

80
0 10 20 30 40 50 60 70 80 90 (l/s)
4 Q
0 40 80 120 160 200 240 280 320 (m3/h)

0
0 10 20 30 40 50 60 70 80 90 (l/s)
P2(KW) Q
0 40 80 120 160 200 240 280 320 (m3/h)

48
MOTOR OUTPUT
P2(KW)
40 Technical data DRY WELL INSTALLATION
48 Curve Pump type Motor Rated Weight Weight
32 No. P1 P2 current normal Ex
(kW) (kW) (A) (kg) (kg)
40
24
a VX 3460-FU114 (Ex) 25,0 22,0 44,0 447 447
b VX 3460-FU124 (Ex) 29,1 25,6 51,4 474 474
32
16
c VX 3463-FU124 (Ex) 29,1 25,6 51,4 474 474
d VX 3463-FU134 (Ex) 32,8 29,2 59,0 489 489
24 e VX 3466-FU134 (Ex) 32,8 29,2 59,0 489 489
8
f VX 3466-FU144 (Ex) 37,1 33,0 67,1 504 504
16 g VX 3468-FU144 (Ex) 37,1 33,0 67,1 504 504
0
h VX 3468-GU154 (Ex) 41,1 37,4 70,4 521 521
0 10 20 30 40 50 60 70 80 90 (l/s)
8 Q i VX 3470-FU144 (Ex) 37,1 33,0 67,1 504 504
0 40 80 120 160 200 240 280 320 (m3/h) j VX 3470-GU174 (Ex) 50,1 46,1 84,3 552 552
0 k VX 3471-GU154 (Ex) 41,1 37,4 70,4 521 521
0 10 20 30 40 50 60 70 80 90 (l/s) l VX 3471-GU174 (Ex) 50,1 46,1 84,3 552 552
Q
0 40 80 120 160 200 240 280 320 (m3/h)

HOMA - PUMP TECHNOLOGY | 35

DN 150 - VX 34...-6 POLE

Vortex impeller
100 mm Ø Spherical clearance
960 rpm

HYDRAULIC PERFORMANCE
20
H(m) Technical data WET WELL INSTALLATION
18 Curve Pump type Motor Rated Weight Weight
20
No. P1 P2 current normal Ex
H(m)
16 (kW) (kW) (A) (kg) (kg)
18
a VX 3460-P76 (C)(Ex) 9,0 7,3 16,3 239 251
14 b VX 3463-P86 (C)(Ex) 12,0 10,0 22,4 264 276
16
c VX 3466-P86 (C)(Ex) 12,0 10,0 22,4 264 276
12
14 d VX 3468-P86 (C)(Ex) 12,0 10,0 22,4 264 276
e VX 3470-P96 (C)(Ex) 16,0 13,6 29,4 278 290
10
12 f VX 3471-P96 (C)(Ex) 16,0 13,6 29,4 278 290
8
10

6
8

4
6

2
4
0
2 0 10 20 30 40 50 60 70 80 90 (l/s)
Q
0 40 80 120 160 200 240 280 320 (m3/h)
0
0 10 20 30 40 50 60 70 80 90 (l/s)
Q
P2(KW) 0 40 80 120 160 200 240 280 320 (m3/h)

16 MOTOR OUTPUT
P2(KW)
14
Technical data DRY WELL INSTALLATION
16
12 Curve Pump type Motor Rated Weight Weight
No. P1 P2 current normal Ex
14
10 (kW) (kW) (A) (kg) (kg)
12 a VX 3460-PU76 (Ex) 9,0 7,3 16,3 245 257
8 b VX 3463-PU86 (Ex) 12,0 10,0 22,4 274 286
10 c VX 3466-PU86 (Ex) 12,0 10,0 22,4 274 286
6
d VX 3468-PU86 (Ex) 12,0 10,0 22,4 274 286
8
4 e VX 3470-PU96 (Ex) 16,0 13,6 29,4 291 293
f VX 3471-PU96 (Ex) 16,0 13,6 29,4 291 293
6
2

4
0
0 10 20 30 40 50 60 70 80 90 (l/s)
2 Q
0 40 80 120 160 200 240 280 320 (m3/h)
0
0 10 20 30 40 50 60 70 80 90 (l/s)
Q
0 40 80 120 160 200 240 280 320 (m3/h)

36 | HOMA - PUMP TECHNOLOGY

ACCESSORIES

Permanent wet well installation with auto-coupling system Transportable wet well installation Permanent dry well installation vertical Permanent dry well installation horizontal

No. Description Type Dimension Part No.

1 Auto-coupling system, cast iron, consisting of auto-cou- KK 80/80 DN 80 8604025

pling with flanged elbow, flanged pump coupling and KK 80/100 DN 80/DN 100 8604030
upper slide rail bracket KK 100/100 DN 100 8604055
KK 100/80 DN 100 / DN 80 8604060
Execution (Material): KK 150/150 DN 150 8604070
- Cast iron KK 150/100 DN 150 / DN 100 8603632
KK 200/150 DN 200 / DN 150 8604105
- Cast iron, upper slide-rail bracket - stainless steel KKR 80/80 DN 80 8604026
KKR 80/100 DN 80/DN 100 8604031
KKR 100/100 DN 100 8604056
KKR 100/80 DN 100 / DN 80 8604061
KKR 150/150 DN 150 8604071
KKR 150/100 DN 150 / DN 100 8604073
KKR 200/150 DN 200 / DN 150 8604106
- Complete stainless steel KKC 80/80 DN 80 8604027
KKC 100/100 DN 100 8604057
KKC 150/150 DN 150 8604072
B Auto-coupling system consisting of auto-coupling with KS 80/100 DN 80 / DN 100 8604045
horizontal discharge flange, flanged pump coupling and KS 100/100 DN 100 8604065
upper slide rail bracket. KS 150/150 DN 150 8604075
KS 200/150 DN 200 / DN 150 8604083
Intermittend slide rail 1½“ for DN 100 7322931
- Cast iron 2“ for DN 150 7320121A
2½“ for DN 200 7322911
- Stainless steel 1½“ for DN 80 7323854A
1½“ for DN 100 7320355B
2“ for DN 150 7323974B
D Guide rails - pair, per meter
1½“ for DN 80/100 2190155
Execution (Material): 2“ for DN 150 2190205
- Galvanized steel 2½“ for DN 200 2190225
- Stainless steel 1½“ for DN 80/100 2190254
2“ for DN 150 2190256
2½“ for DN 200 2190258
F Pump chain set 2 m 2800362.02
G 3 m 2800362.03
-S
 ingle row, tested, load bearing capacity up to 320 kg
4 m 2800364.04
Pitch 984 mm, 4x12 with shackle
5 m 2800362.05
6 m 2800362.06
8 m 2800362.08
Pump chain set 4 m 2800367.04
5 m 2800367.05
-D
 ual row, tested, load bearing capacity up to 320 kg
6 m 2800367.06
Pitch 984 mm, 4x12 with shackle
8 m 2800367.08

Pump chain set

4m 2800365.04
-D
 ual row, tested, load bearing capacity up to 560 kg
6m 2800365.06
Pitch 943 mm, 5x15 with shackle

HOMA - PUMP TECHNOLOGY | 37

ACCESSORIES

Permanent wet well installation with auto-coupling system Transportable wet well installation Permanent dry well installation vertical Permanent dry well installation horizontal

No. Description Type Dimension Part No.

Pump chain set

6m 2800366.06
-D
 ual row, tested, load bearing capacity up to 850 kg
Pitch 998 mm, 6x18 with shackle

H 90° flanged elbow DN 80 2153302

DN 100 2153303
- with 2 flanges (Q-piece)
DN 150 2153353
DN 200 2153363
- or flanged y-piece for twin pump arrangement, horizontal DN 80 / 80 / 80 on request
discharge (optional with vertical discharge) with gasket and DN 80 / 80 / 100
fixing bolts DN 100 / 100 / 100
DN 100 / 100 / 125
DN 100 / 100 / 150
DN 150 / 150 / 150
DN 200 / 200 / 200
I Discharge pipe DN 80 2152081
DN 100 2152201
- with 2 flanged (FF-piece) 1m, DN 125 2152221
gasket and fixing bolts DN 150 2152251
DN 200 2152271
Discharge pipe DN 80 2150080
DN 100 2150100
- per additional meter DN 125 2150125
DN 150 2150150
DN 200 2150200
- Flanged reducer (FFR-piece) on request

J Flanged swing check valve DN 80 2212807

DN 100 2212809
- cast iron
DN 125 2212810
DN 150 2212811
DN 200 2212816
K Flanged gate valve DN 80 2216080
DN 100 2216100
- cast iron DN 125 2216125
DN 150 2216150
DN 200 2216200
L Ring base stand NB 100 A DN 100 7321215
NB 100 B DN 100 7321705
- up to 16,9 kW (P2)
NB 150 A DN 150 7321285
- from 17,0 kW (P2)
NB 150 DN 150 7321275
M Flanged spigot elbow DN 100 / 100 mm 6001141
with gasket and fixing bolts

N 90° Flanged elbow R3“ IG/AG 2111805

Double nipple R3“ AG 2128030
Threaded flange DN80 / R3“ IG 2215080
Flanged to thread elbow DN100 x R4“ AG 6001121
with gasket and fixing bolts DN150 x R6“ AG 6001205

38 | HOMA - PUMP TECHNOLOGY

ACCESSORIES

Permanent wet well installation with auto-coupling system Transportable wet well installation Permanent dry well installation vertical Permanent dry well installation horizontal

No. Description Type Dimension Part No.

O STORZ-fixed coupling B-R3“ IG 2010602

A-R4“ IG 2010701
F-R6“ IG 2010961
P STORZ-hose coupling with spigot B - 75 mm 2013502
A - 110 mm 2013801
F - 150 mm 2013901
STORZ-reducer A-B 2015612
F-A 2015622
Q Reinforced hose (inner dia. in mm) 75 mm 2632075
110 mm 2632110
150 mm 2632150
Hose with pre-attached couplings on request

R Hose bands T 70-90-13 2309013

S100 / 20 2310020
GBS 112-121/25 2311520
GBS 168-174/30 2317520
S Flanged pump stand with gasket and fixing bolts TVS 100 A (up to 18 kW) DN 100 7321705
TVS 150 A DN 150 7321725
Pump stand with suction elbow, cleaning hole, TVS 100 A-R (up to 18 kW) DN 100 8604220
gasket and fixing bolts TVS 100 A-R DN 100 8604221
TVS 150 A-R DN 150 8604225
TVS 150-R DN 150 8604230
TVS 150/200 A-R DN 150 / DN 200 8604232
TVS 150/200-R DN 150 / DN 200 8604235
Screw kit with gaskets DN 80 2214080
- galvanized steel DN 100 2214100
DN 150 2214150
- Stainless steel DN 80 2214082
DN 100 2214102
DN 150 2214152

Stainless steel pipes, fittings on request. Electrical or electronic control panels for pumps and pump stations with accessories on request. Sumps of
concrete or synthetic material for complete pump stations please see special leaflet.

HOMA - PUMP TECHNOLOGY | 39

 HOMA In operation worldwide Sales and service network
Product Range HOMA pumps and systems are HOMA stays close to its customers
Submersible waste water pumps employed in over 100 countries through a comprehensive network

Deep-well submersible pumps worldwide – in a myriad of projects, of professional sales and service
large and small, including the Palm agencies.
Submersible sewage pumps
Islands in Dubai. They meet all HOMA also makes selecting and de-
Submersible grinder pumps with
cutter system international safety and production signing pump systems as straightfor-
standards and are certified by the ward as possible through HOP.SEL, our
Waste water disposal units
relevant state or private bodies for specially developed software, available
Sewage disposal units
waste water disposal. free of charge online or on CD-ROM.
Packaged pump stations
It is one of our main objectives
Mixers and flow generators
to maintain and extend this high
Injector systems for tank
standard at all times.
cleaning
Garden pumps and domestic
booster units
Control boxes

HOMA Pumpenfabrik GmbH

0.0/1018 (DU) gra - 1.0/0418 (fly) gra Nr. 0033075GB

Industriestraße 1 53819 Neunkirchen-Seelscheid, Germany

Telefon: +49(0)2247/702-0 Fax: +49(0)2247/702-44
e-Mail: [email protected] Internet: www.homa-pumps.com

We reserve the right to alter our specifications without notice! FIND US ON FACEBOOK!
facebook.com/homapumps
Bilder: Cover = © Jonutis - istockphoto.com | S.2 = © tuachanwatthana - istockphoto.com | S.4 = © mariusz szczygieł - Fotolia.com | © Homa Pumpenfabrik