DW12-CBE4

Dishwasher

Service Manual

Models:
DW12-CBE4

Features

l Programme control, four program for select

l Water softening function is provided which can prevent incrustation
l Adjustable upper rack

Haier Group
Manual code: 0120502316 Edition:2004.01.10

-1-
 Contents

1. Product Code illumination and Series introduction …………………….………... 3

2. Features………………………………………………… ……………………………….4
3. Specifications…………………………………………… ……………………………….5-7
4. Safety Precaution………………………………………… ………………………….…..8
5. Net Dimension…………………………………………………………………………….9
6. Installation and Accessory Parts…………………… …………………………………. 9-10
7. Parts and Functions………………………………… ………….. ………………...…... 11-14
8. Function Schedule……………………………………………………………………….. 15
9. Program Diagram………………………………………………………………………… 16
10. Maintenances Service and Trouble Shooting……… ………………………………… 17-23
11. Circuit Diagram……………………………… ………………………………….….…. 24
12. Exploded View…………………………………… …………………………………... 25-26
13. List of Parts………………………………………… ………………………………… 27-30
14. Damageable Parts List → Remark……………………………………………….. 31

-2-
 Product Code illumination and Series Introduction

1.Product Code Illumination and Series Introduction

Model Identification

D W 12 ─ □ □ □ □

A B C D E F

A: Abbreviation of dishwasher
B: Code name of Nominal capacity
C: Series of factory design
D: Freestanding/built –in/semi-built-in
E: Mechanical/Electronic
F: The second series of factory design code name described/outer side material

Examples:

DW12-CBE5
It represents automatic spraying electronic built-in dishwasher, the cavity capacity is 12
standard sets.

-3-
 Features

2.Features
2.1. Programme control, four program for select

2.2. Water softening function is provided which can prevent

incrustation forming
2.3. Three sprayer may the plate of dishwasher to clean , washing perforce of

dishwasher is up to 97%

-4-
 Specifications

3.Speciafications
DISH WASHER BI
Last update 2003-2-10 2003-2-10
Revision 00.01 00.01
Supplier Type N°. DW12-CBE4
Suppliers bar code N°. EAN
Sales Brand / Model GXCH
Sales bar code N°. EAN
1. Key-features
Energy efficiency Class B
Washing efficiency Class B
Drying efficiency Class B
Noise level power / pressure dB(A) 55/-
Energy consumption* kWh / y 449
kWh/24h 1.23
Water consumption* l 18
Duration of programme (Based on 65° normal prog.) mins. 119
Place settings (international standard) 12
Programs n°. 5
Programme selection single dial / electronic - /l
Washing temperatures °C 40/50/70
Spray levels n°. 3
Certification's (CE / LGA / ISO 9001 / ISO 9002) CE / ISO 9001
2. Technical equipment
Work top / -removable -/l
Decor frame / optional l/l
Water heating element hidden / open -/l
Refill spy-lamps salt / rinse aid -/-
Program progress indicator LED / visual l/-
Inner door S= stainless steel / P= plastic S

Interior S= stainless steel / P= plastic S

Dispenser system Detergent / Rinse aid l/l
Water softening system / n°. of water hardness levels l/ 4
Electronically controlled water hardness -
Easy clean filter system / self cleaning micro filter l/-
Upper Basket Full load ajustable/Height adjustable - /l
Lower Basket Folding/Not folding - /l
Pates Rack On Upper Basket l
Cuttlery Basket can be separated for half wash /inseparated - /l
Height adjustable top basket l

-5-
 Cuttlery sliding tray / removable basket l/l
Plates sizes bottom basket / uper basket cm 19-26/14
Water inlet hose cold water / hot water l/-
Water drain hose / -hose support l/l
Drying system Condenser / Turbo vented Natural
Height adjustable feet n°. / max. mm 4/20
Delay timer (from - to) h
3. Safety systems
Child resistant door lock CDL -
Anti flood system AFS l
Waterproof anti leak system ALS l
Water return protection WRP l
Acqua Stop kit -
4. Programs
Normal C° 50
Intensive C° 70
Economic C° -
Delicate or Light wash C° 50
Rinse C°
Glasses C° 50
Rapid C° 40
Pre-wash (soak) C° r
Strong C°
5. Additional program settings (optional function keys)
Half load
Economic -
Rapid -

Delicate glasses -
Pots -
6. Technical data
Voltage/frequency V/Hz 220-240V~/50Hz
Nominal power W 2100
Main fuse (intensity) A 13
7. Product dimensions
Unit dimensions (H x W x D) cm 82X60X58
Depth with open door cm 116
Net weight kg 39
8. Built-In
Requested measures of niche (H x W x D) cm 82X60X59.5
Dimensions of door panel (H x W) cm 72.5x59.6
9. Packing
Dimensions of packing (H x W x D) cm 88X66X67.5
Weight of packing (all materials) kg 43

-6-
10. Informations for importer
14,5 m (84 CBM.) Truck load capacity pcs -
Jumbo (120 CBM.) Truck load capacity pcs -
40' Container load capacity pcs -
40' HC load capacity pcs 162
Max. failure rate (12 Months after sales to end customer) pc/% -
11. Packing materials / Recycling symbols RS REzY
Carton (weight) g 4,600
Polistyren (weight) g 1,518
Polyetylene foil (weight) g 65
Other packing materials (weight) g 55
Wood (weight) kg 0.15
12 Delivery Time of First Batch Jan. 2003

-7-
 Safety Precaution

4. Safety Precaution

-8-
 Net dimension

5.Net dimension

6.Installation and Accessory Parts

6.1 Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it,
and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water
supply and drain hoses that can be positioned on the right or the left to facilitate proper
installation.
6.2 Leveling the Appliance
Once the appliance is positioned, adjust the feet (screw them in or out) to adjust the
dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.
If the appliance is level, it will help ensure proper performance.

-9-
 Installation and Accessory Parts
6.3 Cold Water Connection
Connect the cold water supply hose to a threaded 3/4(gas) connector, inserting the small
filter supplied with the dishwasher and making sure that it is fastened tightly in place (see
Fig.1) If the water pipes are new or have not
been used for an extended period of time, let the
water run to make sure that the water is clear
and free of impurities. If this precaution is not
taken, there is a risk that the water inlet can get
blocked and damage the appliance.

6.4 Hot Water Connection

The water supply to the appliance can also be
connected to the
house's hot water line (centralised system,
heating system), as long as it does not exceed a temperature of 60℃ . In this case, the
wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly
reduced.

6.5 Drain Hose Connection

Insert the drain hose into a drain pipe with a minimum diameter of 4cm,or let it run into the
sink, making sure to avoid bending or crimping it. Use the special plastic support that comes
with the appliance (see Fig.2). The free end of the hose must be at a height between 40 and
100 cm and must not be immersed in water.

6.6Electrical Connection
After making sure that the voltage and frequency values for the current in the home
correspond to those on the rating plate (located on the stainless steel inner door of the
appliance) and that the electrical system is correct for the maximum voltage on the rating
plate, insert the plug into an electrical socket which is earthed properly (the earthing of the
appliance is a safety requirement mandated by law). If the electrical socket to which the
appliance must be connected is not appropriate for the plug, replace the plug ,rather than
using adpators or the like as they could cause overheating and burns.

- 10 -
 Parts and Functions

7.Parts and Functions

- 11 -
 Parts and Functions

Salt
The hardness of the water varies from place to place. If hard water is used in the
shwasher,deposits will form on the dishes utensils.
The appliance is equipped with a special softener that uses a salt specifically designed to
eliminate lime and minerals from the water.
Loading the Salt into the Softener
Always use salt intended for use with dishwashers.
The salt container is located beneath the lower rack and should be filled as follows:
- Remove the lower rack and then unscrew and remove the cap from the salt container;
- If you are filling the container for the first time, fill it with water;
- Place the end of the funnel(supplied) into the hole and introduce about 2 kg of salt.It is
normal for a small amount of water to come out of the salt
container.
- Carefully screw the cap back on.
The salt container must be filled when the "low salt" indicator
light (located on the control panel) comes on.
To prevent the formation of rust, load the salt just before
beginning a wash cycle.

Adjusting Salt Consumption

The dishwasher is designed to allow for
adjusting the amount of salt consumed based
on the hardness of the
water used. This is
intened to optimize and
customize the level of
salt consumption so
that it remains at a
minimum. Your local
Water Board can
supply the degree of hardness of the water in
your area.
To adjust salt consumption, proceed as follows:
- Unscrew the cap from the salt container;
- There is a ring on the container with an arrow on it (see figure to the side), If necessary,
rotate the ring in the anticlockwise direction from the "-" setting towards the "+" sign, based
on the hardness of the water being used. It is recommended that adjustments be made in
accordance with the following scheme:

- 12 -
 Parts and Functions
Detergent
Detergent specifically intended for use with dishwashers must be used.The dispenser must
be refilled before the start of each wash cycle following the instructions provided in the
"Wash Cycle Table." The detergent dispenser is located on the inside panel the door.

Loading the detergent

To open the "A" cover on the dispenser,press the "B" button.The detergent for the wash
cycle should be poured into the "C" compartment.
After the detergent has been placed in the dispenser, close the cover and press down until it
clicks in place.
Notice:To facilitate closing the cover, remove any e
xcess detergent on the edges of the dispenser.
Rinse Aid
This product makes dishes sparkle and
helps them to dry without spotting.The
dispenser is located on the inside panel of
the door and should be filled after every 80
wash cycle (or when the rinse aid indicator
light comes on for those models with this
feature).

Loading the Rinse Aid

To open the dispenser,turn the "C" cap in the anti-clockwise direction and then pour in the
rinse aid,making sure not to overfill.The amount of rinse aid used for each cycle can be
regulated by turning the "F" dose adjustor ,located beneath the "C" cap, with a
screwdriver.There are 6 different settings; the normal dosage setting is 3.

Important
Proper dosage of the rinse aid improves
drying.
If drops of water remain on the dishes or
spotting occurs,the dosage adjustor should
be turned to a higher setting.
If the dishes have white streaks,turn the
dosage adjustor to a lower setting.

- 13 -
 Parts and functions
Before placing the dishes in the dishwasher, remove the larger
food debris to prevent the filter from becoming clogged, which results in reduced
performance.
If the pots and pans have baked-on food that is extremely hard to remove, we recommend
that they be allowed to soak before they are washed. This will eliminate the need for extra
wash cycles. Pull out the rack to facilitate loading the dishwasher.

How to Use the Upper Rack

The upper rack is designed to hold more delicate and lighter
dishware, such as glasses, cups and saucers, plates, small bowls
and shallow pans (as long as they are not too dirty).
- Position the dishes and cookware so that they do not get moved
by the spray of water.
The upper rack can be adjusted for height by using the knobs lo-cated
on the sides of the rack itself (see fig.B).

- 14 -
 Function Schedule

8. Function Schedule
1、Intensive wash
Hot Pre-wash 13min 70℃Main-wash 38min Cold rinse 10min Cold rinse 6 min

Hot rinse 24min Drying 19min

2、Normal wash
Pre-wash 18min Pre-wash 9min 50℃Main-wash 55min Hot rinse 18min

Drying 19min

3、Light wash
Pre-wash 14min 50℃Main-wash 55min Cold rinse 10min Hot rinse 24min

Drying 19min

4、Glasses wash
50℃Main-wash 55min Cold rinse 13min Hot rinse 23min Drying 19min

5、Rapid wash
40℃Main-wash 17min Cold rinse 14min

- 15 -
 Program Diagram

9. Program Diagram

Cycle Selection
Cycle Information
Pre-wash use hot water.
Extended wash at 50℃
Rinse with cold water
Rinse with hot water at 70℃.

The second pre-wash use

cold water.
Extended wash at 50℃
Rinse withcold water
Rinse with hot water at 70℃.

Pre-wash with cold water.

Extended wash at 50℃.
Rinse with cold water.
Rinse with hot water at 70℃.

Wash at 50℃.
Rinse with warm water.
Hot rinse at 70℃.

Short wash at 40℃.

Cold rinse.

- 16 -
 Maintenances Services and Trouble Shooting
10.1Maintenances Services
It may occur that the dishwasher does not function or does not function properly Before
calling for assistance,Iet us see what can be done first :have you forgotten to press one of
the buttons or to perfom an essential operation?

10.2 Trouble Shooting

Trouble Shooting Tabie

Water
Phenom Door switch Water supply Drain pump Sencor open
overflow
enon trouble troubl trouble circuit
trouble

LED1 1 1 0 1 1

LED2 1 1 1 1 1

LED3 1 0 1 0 1
LED4 1 0 1 1 0
LED5 1 0 0 0 0

beam √ √ √ √ √

- 17 -
 Maintenances Services and Trouble Shooting

analysis of the common breakdowns

Door switch trouble

N
Whether door is closed Close the door

check if door flap is OK N

Replace it

Dismantle the door case and using N

avometer to measure if the two Change the door switch
terminals of door switch is on.

Cable or program controller

is broken

- 18 -
 Maintenances Services and Trouble Shooting

analysis of the common breakdowns

water supply trouble

N
Whether water is flowing in the hose
Turn on the stopcock
Whether the stopcock is turned on

N
Whether solenoid valve
measure whether solenoid valve
is working
is electrified

Y Change the solenoid valve

Check whether the Y

user’s water pressure is too
water intake veloscity is
slow
too slow

N
Whether water level
Change water level switch
switch is ok

Cable or the program

controller is broken

- 19 -
 Maintenances Services and Trouble Shooting

analysis of the common breakdowns

Drain pump trouble

Repair the pipeline

and drain pump

Whether the pipeline

Whether drain Y
and drain pump was
pump is working
blocked

N
N

Whether drain
The drain hose is too
pump is electrified
high

Y
N

Cable or the program The drain pump is

controller is broken broken

- 20 -
 Maintenances Services and Trouble Shooting

analysis of the common breakdowns

Heating trouble

Check:

Whether socket connector is connected well N Connect it well

Check the resistance N

Replace the heater
between the heater resistor

Check whether the circuit Y Replace the temperature limiting

between the two teminals device
is open

The cable or the controller

board is suspected
damaged

- 21 -
 Maintenances Services and Trouble Shooting

analysis of the common breakdowns

Water overflow trouble

Whether water is deposited is Whether water flows out of Bottom

Y N
the bottom case the water overflow conduit case is leaking

N N
Check whether the water change the water
level switch is closed level switch

Whether the water change water

N Y
overflow swich is ok overflow switch

Program controller or the

controller board is broken

Program controller or the

controller board is broken

- 22 -
 Maintenances Services and Trouble Shooting

analysis of the common breakdowns

power trouble

check whether
check whetherthe the
power connector
power connector N Connect it properly
is in position
is in position

check whether the circuit N the cable or the controller board

between the two terminals should be suspected
is open

replace the power switch

- 23 -
 Circuit Diagram

11. Circuit Diagram

box
Wiring
Power switch
Door switch
control
panel
Relay

Drain pump

Disepenser

Washing valve

softer valve

Overflow switch
Inlet valve

Washing pump

- 24 -
 Exploded View

12.Exploded View

- 25 -
 Exploded View / List of Parts

13.List of Parts
NO. In
Name of part Part Specialized code QTY.
explored view

1 Upper rear crosspiece 012G1310020 1

2 Main screw for self threading screw 3.5 0120200057 3

3 Upper front crosspiece 0120800225 1

4 Right upright assembly 012G9350003 1

5 Painted right side pannel 012G1020068 1

6 Upper basket 0120100074 1

7 Tilter for upper basket 0120201235 2

8 Adjustable foot 0120600009 2

9 Cutlery basket 0120201523 1

10 Lower basket 0120100075 1

11 Rear intermediate crosspiece 012G1310023 1

- 26 -
 12 Drain hose stop 012G2160204 1

13 Lower rear crosspiece for acquostop 0120101601 1

14 Insulated tub assembly 0120802530 1

15 Wheel for lower basket 0120200964 8

16 Wheel for upper basket 0120200963 8

17 Wheel support pin 0120200965 16

18 Basket rail stop 0120200967 4

19 Mobile rail for basket 012G1020069 2

20 Tub gasket 0120300248 1

21 Support frame for tub gasket 012G1020082 1

22 Upright small block 0120200124 2

23 Hooking small block 012G2150037 1

24 Tray 0120100290 1

25 Hooking small block 012G2150036 1

26 Rail support assembly 0120200966 4

27 Left upright assembly 012G9350002 1

28 Cover for front crosspiece 0120200065 2

29 Lower front crosspiece 012G1310027 1

30 Painted left side pannel 012G1020066 1

31 Right threaded tapered gear 0120800223 1

32 Left threaded tapered gear 0120800224 1

33 Tie rod for foot adjusting 0120100051 2

34 Overflow protection pipe 0120300282 1

35 Overflow outlet pipe 0120300281 1

36 Overflow ring 0120300283 1

37 Overflow seat 0120201029 1

38 Overflow cap 0120201028 1

39 Outer duct 012G2160241 1

40 Rubber coupling 0120300164 1

- 27 -
 41 Terminal box assembly 0124000162 1

42 Adjusting screw 0120600065 2

43 Feeding dispenser assembly 0120801832 1

44 Water diversion pipe 0120201011 1

45 Pin for inner duct hooking 0120201010 1

46 Upper sprayer assembly 0120801726 1

47 Support for float 012G2160206 1

48 Float for Acquastop 012G2110049 1

49 Micro switch Elbi Type S3 012G6050040 1

50 Power supply cable 0120400105 1

51 Air outlet 012G2160197 1

52 Thermo limiter assembly 0120800379 1

53 Drain pump 012G5040004 1

54 O-Ring 012G4050158 1

55 Drain hose assembly 012G2140061 1

56 Pressure switch tube 012G2140067 1

57 Heater Support block 012G1020032 1

58 Heater assembly 012G6040016 1

59 Heater jacket 012G4050162 2

60 Water softener 0124000164 1

61 Washing pump assembly 012G9370094 1

62 Vibration-proof ring motor 012G4050159 1

63 Motor bracket assembly 012G9350006 1

64 Breather assembly 012G2160196 1

65 Ring nut for lower spayer fastening 0120201006 1

66 Elasticity retainer 0120600060 2

67 Induction contact 012G1450902 1

68 Breather ring nut 0120201008 1

69 Duct coupling 012G4050242 1

- 28 -
 70 Lower sprayer 012G1020070 1

71 Lower sprayer column 0120201005 1

72 Lower sprayer base 0120201004 1

73 O-type sealing ring 012G4050153 1

74 Lower sprayer base fixing piece 012G2160193 1

75 Electric wave filter 0124000162 1

76 Softener ring nut 012G2150042 1

77 Water softener sealing ring 012G4050154 1

78 Cover of salt dispenser port assembly 0120802037 1

79 Salt dispenser funnel 012G2160195 1

80 Connection pipe 012G4050244 1

81 1-level pressure switch 012G6050031 1

82 Water gutter 012G2160191 1

83 Rubber coupling 012G4050152 2

84 Ring nut for cup fastening 0120201292 1

85 Cup gasket 012G4050151 1

86 Microfilter (polyesthere) 012G1040014 1

87 Inside filter screen 0120200949 1

88 Plane filter screen 0120200948 1

89 Filter 0120201009 1

90 1-way solenoid valve 012G5060020 1

91 Water charge hose 0120800683 1

92 Thermo limiter 012G6010009 1

93 Basket guide housing 0120201007 1

94 O-Ring 012G4050157 3

95 Ring nut for outer duct fastenig 012G2160194 1

96 Control cable 0120801673 1

97 Door gasket 012G4050243 1

98 Detergent dispenser 0124000215 1

- 29 -
 99 Inner Door 0120101404 1

100 Door switch 0120800356 1

101 Switch mechanism assembly 0120800357 1

102 control panel 0124000165 1

103 control cover 0120200244 1

104 Card for led support 0120200985 1

105 Left led card support 0120200994 1

106 Door spring Cover 0120200048 2

107 Power Key-press 0120200226 1

108 Power supply switch 012G9370091 1

109 Green indicator 0120800354 1

110 Springs adjusting small block 0120100042 2

111 Spring adjusting screw 0120600197 2

112 Block hooking bracket 0120100052 2

113 Outer door 0120100043 1

114 Door spring 0120100047 2

115 Left hinge articulation 012G9380559 1

116 Complete hinge assembly 0120800589 1

117 Right hinge articulation 012G9380558 1

118 Rubber 0120300014 2

119 Adjusting cables 0120100053 2

120 Drain hose support bracket 012G2130193 1

121 Door gasket guard strip 012G2140094 2

122 Dashboard 0120802453 1

123 Hinge shaft 012G8080007 2

- 30 -
 Exploded View / List of Parts

14.Damageable Parts List

NO. In
Name of part Part Specialized code QTY.
explored view

53 Drain pump 012G5040004 1

81 Water level switch 012G6050031 1

100 Door switch 0120800356 1

108 Power supply switch 012G9370091 1

- 31 -