2.

Product Specifications

2. Product Specifications

2.1. Specifications

2.1.1. Product Overview

1) Speed
• M337x series : Up to 33 ppm in A4 (35 ppm in Letter)
• M387x series : Up to 38 ppm in A4 (40 ppm in Letter)
• M407x series : Up to 40 ppm in A4 (42 ppm in Letter)
2) Processor
• M337x series / M387x series / M407xFR : 600 MHz
• M407xFX : 600 MHz + 1GHz
3) Printer Languages
• PostScript3, PCL6/5e, IBM ProPrinter, EPSON, SPL
4) Memory (Std / Max)
• M337xFD / M387xFD / M387xFW / 407xFR : 256 MB / 512 MB
• M407xFX : 1 GB / 1 GB
5) Interfaces
• High-Speed USB 2.0
• Ethernet
• M337xFD / M387xFD / M387xFW ; 10/100 Base TX
• M407xFR / M407xFX : 10/100/1000 Base TX
• Wireless Network
• M387xFW Only : 802.11b/g/n
• LCD
• 4–line LCD : M337xFD / M387xFD / M387xFW / 407xFR
• 4.3 inch Touch LCD : M407xFX
6) Consumables
• Integrated Toner System
: M3370FD / M3870FD/ M3870FW / M4070FR / M4070FX

• Separated Toner System

: M3375FD / M3875FD/ M3875FW / M4075FR / M4075FX

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-1

2. Product Specifications

2.1.2. Specifications

• Product Specifications are subject to change without notice.

2.1.2.1. General

Item Specification
Temperature Operating 10 to 30 °C (50 to 86°F)
Storage -20 to 40 °C (-4 to 104 °F)
Humidity Operating 20 to 80% RH
Storage 10 to 90% RH
Noise Level Print mode • M337x series: Less than 54 dB (A)
• M387x/ M407x series: Less than 56 dB (A)
Copy/ Scan mode • M337x series: Less than 56 dB (A)
• M387x/ M407x series: Less than 58 dB (A)
Power Consumption Ready mode • Less than 10 Wh (Except. M407xNX)
• Less than 15 Wh (M407xNX)
Average operating mode Less than 700 W
Power save mode • Less than 1.1 Wh (Except. M407xNX)
(Wi-Fi Direct on: Less than 2.8Wh / off : 1.6Wh, M387xFW
only)
• Less than 3.9 Wh (M407xNX)
Dimension Width x Length x Height • M337xFD/ M337xHD/ M387xFD/ M387xHD series: 414.6 x
420.6 x 449.1 mm (16.32 x 16.56 x 17.68 inches)
• M387xFW/M407xFR/ M407xFX /M407xHR series: 467 x
444.3 x 482.6 mm (18.39 x 17.49 x 19 inches)
• M4072FD : 410.6 x 483 x 449.1 mm (16.17 x 19 x 17.68
inches)
Weight Machine with • M337xFD/ M337xHD/ M387xFD/ M387xHD series: 21.44
consumables Kg (47.27 Ibs)
• M387xFW/M407xFR/ M407xFX / M407xHR series: 24.8
Kg (54.68 Ibs)
• M4072FD : 15.4 Kg (33.95 lbs)
Reliability & Service Recommended Monthly • M337xFD : 1000 ~ 2500 pages
Printing Volume (AMPV) • M387x series : 1500 ~ 3500 pages
• M407x series : 2000 ~ 4000 pages
Max. Monthly Print • M337xFD : 50,000 pages
Volume • M387x series : 80,000 pages
• M407x series : 100,000 pages

2-2 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.1.2.2. Print

Item Specification
Engine Speed Simplex • M337x series
• Up to 33 ppm in A4 (35 ppm in Letter)
• M387x series
• Up to 38 ppm in A4 (40 ppm in Letter)
• M407x series
• Up to 40 ppm in A4 (42 ppm in Letter)
Duplex • M337x series
• Up to 16 ipm in A4 (17 ipm in Letter)
• M387x series
• Up to 19 ipm in A4 (20 ipm in Letter)
• M407x series
• Up to 20 ipm in A4 (21 ipm in Letter)
FPOT Ready Mode As fast as 6.5 sec
Sleep Mode • M337x series : Less than 15.5 sec
• M387x/407x series : Less than 18 sec
Resolution Optical (Standard) 600 x 600 dpi
Enhanced Up to 1,200 x 1,200 dpi effective output
Emulation PostScript3, PCL6/5e, IBM ProPrinter, EPSON, SPL

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-3

2. Product Specifications

2.1.2.3. Copier

Item Specification
Copy Speed SDMC (SDMC: Single [Simplex to Simplex (1-1)]
Document Multiple Copy) • M337x series
• Up to 33 cpm in A4 (35 cpm in Letter)
• M387x series
• Up to 38 cpm in A4 (40 cpm in Letter)
• M407x series
• Up to 40 cpm in A4 (42 cpm in Letter)
FCOT From Ready @Platen Less than 10 sec
Resolution (ADF) Text mode • Scan : 600 x 600 dpi
• Print : 600 x 600 x 2 bit dpi
Text & Printed Photo • Scan : 600 x 600 dpi
mode • Print : 600 x 600 x 2 bit dpi
Glossy Photo mode • Scan : 600 x 600 dpi
• Print : 600 x 600 x 2 bit dpi
Resolution (Platen) Text mode • Scan : 600 x 600 dpi
• Print : 600 x 600 x 2 bit dpi
Text & Printed Photo • Scan : 600 x 600 dpi
mode • Print : 600 x 600 x 2 bit dpi
Glossy Photo mode • Scan : 1200 x 1200 dpi
• Print : 1200 x 1200 x 1bit - Addressable
Copier Features Duplex Copy • M337xFD / M387xFD / M4072FD : 1–to–2
• M387xFW / M407xFR / M407xFX : 2-to-1, 2-to-2, 1-to-2
Reduce/Enlarge 25 to 400% by 1%unit
ID Card Copy Yes
N-up 2,4
Darkness Adjustment 11 levels
Multicopy Quanity Max 99 copies

2-4 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.1.2.4. Scanner

Item Specification
Scan Method 3 CH CIS
Compatibility TWAIN Standard, WIA Standard
Scan Speed B/W 24 ipm @300 dpi
Gray 24 ipm @300 dpi
Color 8 ipm @300 dpi
Resolution Platen (Optical) 600 x 600 dpi
(D)ADF (Optical) 600 x 600 dpi
Max Resolution@Scan to 4800 x 4800 dpi
Local Host
Scanning Size ((D)ADF) Max. Document Width 216 mm [8 1/2"]
Effective Scan Width 208 mm [8.19"]
Max. Document Length 356 mm [14']
Effective Scan Length 348 mm [13.7"]
Scanning Size (Platen) Max. Document Width 216 mm [8 1/2"]
Effective Scan Width 208 mm [8.19"]
Max. Document Length 297 mm [11.7"]
Effective Scan Length 289 mm [11.37"]
Scan to PC, Email, USB Memory, FTP, SMB
Scan File Format PDF, JPEG, XPS, TIFF

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-5

2. Product Specifications

2.1.2.5. Fax

Item Specification
Compatibility ITU-T G3, ECM
Compression Method MH/MR/MMR,JBIG,JPEG
Modem Speed 33.6 Kbps
Transmission Speed 3sec @336 Kbps
Gray Scale / Halftones 256 levels
Resolution Standard 203 x 98 dpi
Fine/Photo 203 x 196 dpi
Super Fine 300 x 300 dpi
Fax Memory 6 MB
Max Document Width 216 mm [8 1/2"]
Max Document Length 356 mm [14']

2-6 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.1.2.6. Controller and Software

Item Specification
Processor • M337x series / M387x series / M407xFR / M4072FD : 600
MHz
• M407xFX : 600 MHz + 1GHz
Memory Standard • M337xFD/ M387xFD/ M387xFW/ M407xFR/ M4072FD
: 256 MB
• M407xFX : 1 GB
Max • M337xFD/ M387xFD/ M387xFW/ M407xFR / M4072FD
: 512 MB
• M407xFX : 1 GB
Driver Supporting OS [Window]
• XP (32 / 64 bit) / 2003 Server (32/64 bit) / Vista (32/64 bit)
/ 2008 server (32/64 bit) / 7 (32/64 bit) / 2008 Server R2 / 8
(32/64bit)
[Mac]
• X 10.5 ~ 10.8
[Linux]
• RedHat Enterprise WS 4, 5, 6 (32/64 bit)
• Fedora 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 (32/64 bit)
• OpenSuSE 10.2, 10.3, 11.0, 11.1, 11.2, 11.3, 11.4 (32/64 bit)
• SuSE Linux Enterprise Desktop 10, 11 (32/64 bit)
• Debian 4.0, 5.0, 6.0 (32/64 bit)
• Mandriva 2007, 2008, 2009, 2009.1, 2010 (32/64 bit)
• Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10, 9.04, 9.10, 10.04,
10.10, 11.04 (32/64 bit)
[Unix]
• HP-UX 11.0, 11i v1, 11i v2, 11i v3 (PA-RISC, Itanium)
• Sun Solaris 9, 10, 11 (x86, SPARC)
Network Protocols [TCP/IP]
• TCP/IPv4/IPv6, HTTP, SNMPv1/v2c/v3, SMTP, IPSec,
DNS/WINS, DDNS, DHCP, SSL/TLS, BOOTP, AutoIP,
Standard TCP/IP printing, LPR, IPP,UPnP(SSDP), Bonjour,
Telnet, WSD, SLP, SetIP
[Others]
• HTTPs,IPPs, 802.1x(EAP-MD5, EAP-MSCHAPv2, PEAP,
TLS), IPSec

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-7

2. Product Specifications

Item Specification
Interface • High-Speed USB 2.0
• Ethernet
• M337xFD / M387xFD / M387xFW ; 10/100 Base TX
• M407xFR / M407xFX : 10/100/1000 Base TX
• Wireless Network
• ProXpress M382xDW Only : 802.11b/g/n
• LCD
• 4–line LCD : M337xFD / M387xFD / M387xFW /
407xFR /4072FD
• 4.3 inch Touch LCD : M407xFX
Software and Application • Admin Deployment Application
• Easy Printer Manager

2-8 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.1.2.7. Paper Handling

Item Specification
• M337x series
• 250-sheet Cassette Tray @80g/m²
• 1–sheet Manual Feeder
Standard Capacity
• M387x/ M407x series
• 250-sheet Cassette Tray @80g/m²
• 50–sheet Multi Purpose Tray @80g/m²
• M337x series
• 771 sheet (@80g/m² ) with option cassette
Max. Capacity
• M387x/ M407x series
• 820 sheet (@80g/m² ) with option cassette
• Max. Size : 216 x 356 mm (8.5" x 14")
Printing
• Min. Size : 76 x 127 mm (3.0" x 5.0")
• Plain Paper : 50 sheets @ 80g/m²
Capacity
• Envelop : 5 sheets
Multi-purpose tray
A4, A5, A6, Letter, Legal, Folio, Oficio, Executive, ISO B5, JIS B5,
Media sizes
3"x5", Envelope (Monarch, No.10, DL, C5, C6), Custom
NOTE
Plain, Thin, Thick, Thicker, Cotton, Colored, Envelope, Transparency,
Media type
M387x/ M407x series Pre-Printed, Recycled, Labels, Bond, Card stock, Archive
Media weight 16~58 lb (60 to 220 g/m²)
Sensing Paper Empty
Capacity 250 sheets @ 80 g/m²
A4, A5, A6, Letter, Legal, Folio, Oficio, Executive, ISO B5, JIS B5,
Media sizes
Custom
Standard Cassette Tray
Media types Plain Paper, Thin, Thick, Recycled, Bond, Cardstock, Archive
Media weight 16~43 lb (60 to 163 g/m²)
Sensing Paper Empty
Capacity 520 sheets @ 80 g/m²
Media sizes A4, A5, A6, Letter, Legal, Folio, Oficio, Executive, ISO B5, JIS B5
Optional Cassette Tray Media types Plain Paper, Thin, Thick, Recycled, Bond, Cardstock, Archive
Media weight 16~43 lb (60 to 163 g/m²)
Sensing CST Open, Paper Empty
• Face-Down : 150 sheets @ 80 g/m²
Capacity
Output Stacking • Face-Up : 1 sheet
Output Full sensing Yes
Supporting Built-in
Media sizes A4, Letter, Oficio, Folio, Legal
Duplex
Media types Plain Paper, Thin, Thick, Recycled, Bond
Media weight 16~32 lb (60 to 120 g/m²)

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-9

2. Product Specifications

Item Specification
Capacity 50 sheet @80g/m²
Document Weight 12.5~28lb
ADF
Document Size • Width: 142 ~ 216 mm (5.6" ~ 8.5")
• Length : 148 ~ 356 mm (5.8" ~ 14.0")
• Envelop : 10 mm (0.4") from edge (Top, Bottom, Left, Right)
Printable Area Non-Printable Area • Other Media : 4 mm (0.16") from edge (Top, Bottom, Left,
Right)

2-10 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.1.2.8. Consumables

NOTE

M337x/ M387x/ M407x series have 2 types of consumable depending on model.

• Integrated Toner System : M3370FD / M3870FD/ M3870FW / M4070FW / M4070FX / M4072FD

• Separated Toner System : M3375FD / M3875FD/ M3875FW / M4075FW / M4075FX

Integrated Toner System

M4070FR
M3870FD
Item Model Name Average yield M3370FD M4070FX
M3870FW
M4072FD
Laser Toner MLT-D203S Approx. 3,000 pages O O O
Cartridge
MLT-D203L Approx. 5,000 pages O O O
MLT-D203E Approx. 10,000 pages X O O
MLT-D203U Approx. 15,000 pages X X O

NOTE

• The yield of initial toner cartridge is approx. 3,000 pages.

• Declared cartridge yield in accordance with ISO/IEC 19752.

Separated Toner System

M3875FD M4075FR
Item Model Name Average yield M3375FD
M3875FW M4075FX
Toner Cartridge MLT-D204S Approx. 3,000 pages O O O
MLT-D204L Approx. 5,000 pages O O O
MLT-D204E Approx. 10,000 pages X O O
MLT-D204U Approx. 15,000 pages X X O
Imaging Unit MLT-R204 Approx. 30,000 pages O O O

NOTE

• The yield of initial toner cartridge is approx. 3,000 pages.

• Declared cartridge yield in accordance with ISO/IEC 19752.

CAUTION

When purchasing new toner cartridges or other supplies, these must be purchased in the same country as the machine
you are using. Otherwise, new toner cartridges or other supplies will be incompatible with your machine due to different
configurations of toner cartridges and other supplies according to the specific country conditions.

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-11

2. Product Specifications

2.1.2.9. Maintenance Part

Item Part Code Life

Pick up roller (Tray1) JC73-00340A Approx. 90,000 pages
Pick up / Forward roller (Tray2) JC97-02259A Approx. 200,000 pages
Reverse roller (Tray1) JC90-01032A Approx. 60,000 pages
Reverse roller (Tray2) JC97-02259A Approx. 100,000 pages
Transfer roller JC66-02842A Approx. 100,000 pages
Fuser Unit • JC91-01023A (110V) Approx. 90,000 pages
• JC91-01024A (220V)

2-12 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.2. Product Description

This chapter describes the functions and operating principal of the main component.

2.2.1. Front View

NOTE

• This illustration may differ from your machine depending on your model. There are various types of machine.

0
• Some features and optional goods may not be available depending on model or country

17
0 1 2 3
19

20

0
16

15 18
4 21
14

0
5

13 6
22
12
7 23
11

0
8
10
9

24

1 Document feeder cover 14 Output support tray

2 Document feeder width guide 15 Output tray
3 Document feeder input tray 16 Scanner glass
4 Document feeder support tray 17 Scanner lid
5 Document feeder output tray 18 Front cover handle
6 Control panel 19 Paper width guides on a multipurpose (or manual
feeder) tray
7 Control board cover
20 Multi-purpose support tray
8 Front cover
21 Toner cartridge
9 Paper level indicator
10 Tray 2
NOTE
11 Tray 1
M3370 M3870 M4070 M4072FD series
12 Multi-purpose (or manual feeder) tray
13 USB memory port

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-13

2. Product Specifications

22 Toner cartridge 23 Imaging unit

NOTE NOTE

M3375 M3875 M4075 series M3375 M3875 M4075 series

24 Handset

NOTE

Handset model only

2-14 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.2.2. Rear View

NOTE

• This illustration may differ from your machine depending on your model. There are various types of machine.

• Some features and optional goods may not be available depending on model or country

7 8

LINE EXT

2
3
4 OUTPUT
5V

5
6
9 1

1 Rear cover
2 Network port
3 USB port
4 5V output port for IEEE 1284B parallel connector

NOTE

This optional IEEE 1284B parallel connector can be used by plugging in both the USB port and the
5V output port.

5 Power-switch
6 Power receptacle
7 Telephone line socket (LINE)
8 Extension telephone socket (EXT.)

9 Rear cover handle

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-15

2. Product Specifications

2.2.3. Paper Path

The following diagram displays the path the paper follows during the printing process.

[1] S implex [2] Duple x [3] MP

2-16 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.2.4. System layout

This model consists of the Scanner part, Engine part, Hardware and Firmware. The scanner part consists of the platen unit,
ADF/DADF unit, OPE unit. The engine part consists of the mechanical parts comprising Frame, Duplex, Toner cartridge,
Drive unit, Transfer roller, Fuser, Cassette. The Hardware part consists of the main control board, power board, operation
panel, PC Interface.

132

12 14

11

10
2
9 4

3
5
6
8

1 LSU 9 Fuser
2 Cartridge 10 Exit roller1
3 Regi roller 11 Exit roller2
4 MP 12 Scanner (Platen)
5 Feed roller 13 DADF/ADF
6 Pick up roller 14 OPE
7 Cassette
8 Duplex

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-17

2. Product Specifications

2.2.4.1. Feeding Part

It consists of a cassette, an MP tray for supplying different types of media (envelope, label, special paper) and parts
related to paper feed initialization.

1) Cassette
The paper trays consist of the Main trays, Optional trays (SCF), and one Multi-Purpose (MP) tray. The basic cassette is
located on front side of the machine and allows feeding of common paper. Paper size is set using the Size Guides in each
tray. Adjust the Paper length/width guides to match the paper size.

2) Pick up / Reverse(Retard) roller

When pickup takes place, the pickup roller rotates to separate and transport the paper. The pickup roller rotates when the
pickup clutch is activated. The retard roller serve to make sure that a single sheet of paper is moved to the paper path, and the
paper is moved as far as the registration roller by the work of the feed roller. The following is a diagram of the pickup section :

3) Registration roller
It is used as an anti skew device, and to setup proper registration timing with that of the toned image on the drum. It also is
used for jam detection to ensure paper has left the paper tray.

2-18 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

4) MP Tray
The multi-purpose tray can hold special sizes and types of print material, such as postcards, note cards, and envelopes.
It is useful for single page printing on letterhead or colored paper. It uses 3 rollers feeding method to feed 50 sheets
of general papers.

5) Duplex Unit
It has paper transferring function, paper guide function, jam removing function. It is designed for basic attachment, and the
duplex feeding takes a side feeding method. Usable papers are A4, letter, and legal size paper. For removing a jam occurred
in a front part, it is designed to open a cassette and a guide. It is designed to open a rear cover to remove a jam in a rear part.
If a face up tray is open, the duplex option cannot be used.

0 0
A
4

6) SCF (Second Cassette Feeder)

It is the same method with the main cassette, and the capacity is 520 sheets. It has a separate driving mechanism. It is
designed for a common use with a main cassette.

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-19

2. Product Specifications

2.2.4.2. Image Creation

1) Printing process overview

This mono printing system includes the LSU with a laser beam, a toner cartridge and transfer roller.

This machine uses toner cartridge and laser beam for mono printing.

M337x/M387x/M407x series has 2 types of toner cartridge. M3370/M3870/M4070/M4072FD series has the integrated
toner system and M3375/M3875/M4075 series has separated toner system. The separated toner system consists of toner
cartridge and imaging unit. The imaging unit has an OPC drum, cleaning blade etc.

The OPC drum is charged with a negative voltage by the charge roller and is exposed by the light from the LSU (Laser
Scanning unit). The light produced by a laser creates a latent image by discharging on the surface of the OPC drum. The
negatively charged toners are attracted to the latent image due to and electric field. The toners (real image) on the OPC drum
are moved to the transfer media by the positive bias applied to the transfer roller.

1) Charging the OPC drum : The charge roller gives the drum negative charges.

2) Laser exposure : Light produced by a laser diode irradiates the charged OPC through the lens and mirrors.

3) Development : This machine uses a dual-component development system . The magnetic roller carries negatively
charged toner to the latent image on the drum surface.

4) Transfer : The transfer rollers opposite the OPC drums transfer toner from the drums to the transfer media (e.g. paper,
OHP film, etc).

5) Cleaning for OPC drum: The cleaning blade removes remaining toners on the drum surface after image transfer
to the paper.

2-20 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2) Integrated / Separated Toner System

By using the electronic photo process, it creates a visual image.

M3370/M3870/M4070 /M4072FD series M3375/M3875/M4075 series

Integrated Toner System Separated Toner System

Toner Cartridge

Imaging Unit

• Operation condition : Temp 10~30℃, Humidity 20~85% RH

• Developing Method : Non magnetic 1 element contacting method
• Toner : Non magnetic 1 element shatter type toner
• Toner Residual Sensor : Dot count with zCRUM
• OPC Cleaning : Collect the toner by using cleaning blade
• Handling of wasted toner : Collect the wasted toner in the cleaning frame by using cleaning blade
• OPC Drum Protecting Shutter : None
• Classifying device for toner cartridge: ID is classified by CRUM.

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-21

2. Product Specifications

2.2.4.3. Fuser unit

It is consisted of a halogen lamp, heat roller, pressure roller, thermistor and thermostat. It sticks the toner on a paper by
heat and pressure to complete the printing job.

Thermistor
Thermostat
Heat Roller

Halogen Lamp
Pressure Roller2
Pressure Roller

1) Thermostat
When a heat lamp is overheated, a Thermostat cuts off the main power to prevent over- heating.

• Thermostat Type : Non- Contact type

• Control Temperature : 190℃ ± 5℃

2) Thermistor
It is a temperature detecting sensor.

• Temperature Resistance : 7 KΩ(180℃ )

• Rated B-value R25/85 3370K±3% (The Rated B-value is calculated from the zero-power resistance measured
at 25℃ and 85℃)

3) Heat roller
The heat roller transfers the heat from the lamp to apply a heat on the paper.
The surface of a heat roller is coated with Teflon, so toner does not stick to the surface.

4) Pressure roller
A pressure roller mounted under a heat roller is made of a silicon resin, and the surface also is coated with Teflon. When
a paper passes between a heat roller and a pressure roller, the toner adheres to the surface of a paper permanently
through this combination of heat and pressure.

5) Halogen Lamp

• Voltage : 120 V, 115 ± 5 % / 220 V, 230 ± 5 %

• Capacity : 850 Watt ± 42.5W

2-22 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.2.4.4. LSU (Laser Scanning Unit)

It is the core part of the LBP which switches from the video data received to the controller to the electrostatic latent image
on the OPC drum by controlling laser beam, exposing OPC drum, and turning principle of polygon mirror. The OPC drum is
turned with the paper feeding speed. The HSYNC signal is created when the laser beam from LSU reaches the end of the
polygon mirror, and the signal is sent to the controller. The controller detects the HSYNC signal to adjust the vertical line of
the image on paper. In other words, after the HSYNC signal is detected, the image data is sent to the LSU to adjust the left
margin on paper. The one side of the polygon mirror is one line for scanning.

OPC Drum

Photo Diode

Polygon Mirror

Polygon Motor

LD Driver circuit Motor Driver

LD (Laser Diode)
Protector panel

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-23

2. Product Specifications

2.2.4.5. Drive Unit

ProXpress M337x/M387x/M407x series has 2 drive units that is assembled to the right side of the machine.

The main drive unit consists of a BLDC motor, a clutch, various gears for OPC, fuser, exit, feed etc.

The feed drive unit consists of 2 gears for MP, feed.

Main Drive Unit

Feed Drive Unit

2-24 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.2.5. Hardware configuration

ProXpress M337x / M387x / M407x series Electrical Circuit system consists of the following :

• Main controller
• OPE controller
• DDR3 SODIMM
• SCF board (Option)
• SMPS board
• HVPS board
• WLAN Module (M387xFW only)
• MICRO SD 4GB (M407xFR / M407xFX only)

Diagram of the M337xFD/387xFD/387xFW/407xFR/407xFX/4072FD Series Electrical Circuit

OP PANEL
OP E_ LC D (LED)
LCD (2-Line )

LE D_ 3_ 1 _ BLUE(R e s e rv e d )
LSU

n KEY_4 (R es e rv e d)
LE D4 (R e s e rve d )

n KEY_C ANC E L
n KEY_PO WER
LE D_ POWE R

LE D_ ER R OR
LE D_ R EADY

LE D_ TONER
(Dual Beam )

n KEY_EC O
LE D_ EC O
n Hs y nc

C LK_ LSU_M OT
VDO_ 1 _ P

VDO_ 2 _ P
3 .3V_ LSU

G ND

VDO _ 1 _N
G ND

G ND

VDO _ 2 _N
G ND
nLD_ ON

nR E ADY_ LSU
n LS U_MOT _EN
GND
n S H_ 1
n S H_ 2

LD_ P OWER

2 4VS

GND
n POWE R _ SW

5V
n R ST_ OP E
OPE _ R XD
OPE _ TXD

13
12
11
10
9
8
7
6
5
4
3
2
1
GND
5V
20
19
18
17
16
15
14
13
12
11
10

6
5
4
3
2
1
9
8
7

5
4
3
2
1

n KEY_ C ANC E L 1 0
LED_ R E ADY 1 1
LED_ E R RO R 1 2
LE D_ TONE R 1 3
20
19
18
17
16
15
14
13
12
11
10

1
2
3
4
5
6

N. C 1
N. C 2
LED_ EC O 3
N. C 4
n KEY_ EC O 5
PWR _ LE D 6
n POW ER _ SW 7
GND 8
5V_ SUS 9
9
8
7
6
5
4
3
2
1

n R S T_ OP E
5 V_ SUS P
n POWE R _SW

G ND
OP E _ TXD
OPE _ R XD
C LK_ LSU_ MO T
3 . 3 V_LS U

GND

VDO_ 1 _ N
GND

GND

VDO_ 2 _ N
GND
n LD_ ON

n R EADY_LS U
nLS U_ MOT_ E N
GND
n S H_ 1
n S H_ 2

LD_ POWE R
N. C
n Hsyn c

VDO_ 1 _ P

VDO_ 2 _ P

2 4 VS
P AR ALLEL

1 5V_S US P
CN35

3.3 V 3.3 V_ Cover_Open P AR ALLEL 2 N.C

3 GND
OP TION 4 5V_S US P

CN17(FFC 1mm) CN18 (1 . 5mm )

Front Cover LS U_ IF OP E I/F(2lLINE )
CN9 (1 . 5 mm )
OP E I/ F(LED)
Micro Switch
24VS 12
24VS 1 24 VS
1 N.C
2 GND
GND 11
3.3V 2 OP T_nC MDR E Q
CN8(1. 5mm)

THV_R E AD 10 3 THV_ R E AD
4 nTHV_E N 3 N.C
nTHV_ E N 9 24 V1 1
P WM_ THV 8 5 P WM_THV 4 N.C
HVP S

6 P WM_DE V_ DC 24 V1 2 5 GND

CN1 1(1.5 mm)

P WM_ DE V_ DC 7
7 P WM_MHV 5V_ S US P 3
DRAWER CN
P WM_ MHV 6
8 P WM_FUS E R _B IAS EEPROM DDR3 DIMM nR S T_ S C F 4
6
7
GND
GND SCF

S CF_IF
P WM_ FUS E R_B IAS 5
GND 4 9 GND S C F_ TXD
(32KB) (128MB) 5 8 GND

HVPS Supply
GND
3.3V
3.3V_ C ove r_Ope n
3
2
1 3 .3V_Cover_ Open 1
10
11
12
GND
3 . 3V
3 . 3V_ C ove r_Ope n 1
S C F_R XD
nS C F_OP R
_R E Q
6
7
9
10
11
GND
24V
24V
8

DEV
DDR3 DIMM GND
GND 9
12
13
24V
5V
10
THV FAN MAIN (256MB) GND 14
15
5V
5V
r ML-4210/15ND 16 OP T_nR E S E T
CN30(2 m m)
M AIN FAN

OPC MHV 1 GND(FB )

17 OP T_R XD
18 OP T_TXD
2 N. C
3 FAN_ MAIN

NAND FLASH
Va ristor MAIN (128MB)
MX0P 1
MX0N 2

CN20 NE TWORK_IF
MX1P 3
MX2P 4
CN4 (2 mm )

1 GND
A1500 MX2N 5
C R UM

S CRUM 2 S C L1
S DA1 MAIN CLK 25 MHz MX1N 6

D M 3
4 3 . 3V_ C R UM
MX3P 7
MX3N 8
CRUM I/F PBA 25 MHz
FUSER
N.C 6
12 MHz GND 9
LE D1 10
BIAS DRUM N.C 5 LE D0 11
CN9(1 . 5 mm)

3.3V_P S 12
Z-CRUM GND 4 1 GND
Ne twork
Z-C R UM

S CL 3 2 S C L1 GND 13
GND 14
3. 3V_C R UM
S DA
2
1
3
4
3 .3V_ C R UM
S DA RTC CLK RTL8211E
T
USB_IF

32.7KHz VB US 1
CN21

DM 2
DEVELOPER Unit DP 3
0
CN2 9(2 m m)

GND 4
S MP S FAN

FAN 1 24VS

SMPS
2 F AN_S MP S (F/ B)
US B 2.0
USB HUB

SMPS
CN26 (2mm)

1
GND
24 V OFF 2
24 VS 5 GND
S MP S

4 CN6(2mm)
CN

24V OFF
SM PS

R e la y 3 R e la y_AC _ON
CN31(2mm) CN27 (1.5 mm)
Cover Open
C N19(2mm ) CN7 (2mm )
E XIT
CN2( 1.5mm )
OUTBIN FULL
CN16 CN28(2 mm)
AIR
3 CN24 (2mm )
24 VS 4 2 24VS THE RM MAIN MOTOR S E NS OR MP S E NS OR COVE R OP E N SENSOR USB_IF TE MP
Fus e r ON 5 Fus e r ON
1
FUSER ON
MAIN_BLDC_ CLK

n S ENS_ P_ EXIT

n S EN S_ P _E MP T Y
nSE NS_C o_ Op en

3 . 3V_ C_ OPE N1
3 . 3V_ C_ OPE N2
n S EN S_ BIN_F ULL
V_P ROTE CT_ ON

n S EN S_ P _F EE D
M OT_ R E ADY

M P_ C LUTC H

n S EN S_ P _RE GI
P IC KUP_ C LT
T HER M_1

nM OT_ DIR

R E GI_ C LT

S ENS _MP
nM OT_ E N

AM BIENT
3 . 3V_ P S

3 . 3V_ P S
3 .3 V_ PS

1
3 . 3VS

3 . 3VS

3 . 3VS

3 . 3VS
(3 . 9 6m m)

2 4 VS

1 5V_S MP S
24 VS
24 VS

24 VS

24 VS

GND

G ND

G ND

G ND

G ND

G ND

G ND

GND
GND

GND

5V_S MP S
CN2 2

GND
GND
GND
GND

3 .3 V

2
S MP S

DM

N.C
SM PS
CN

DP

GND 2 GND
24 V1 3 24V1
3
4
GND
24V 4 GND
10

11
12

13
14
1
2

1
2
3

1
2

3
4
5

1
2
3

1
2
3

4
5

1
2
3

4
5
6

7
8
9

1
2
3
4
5
6

1
2
1
2
3
4
5
6
7
8
9

5V_SMPS
3.3 V_Co ver_Op en 2

INLE T FUS E R
N
L

3
2
1

3
2
1

3
2
1
3
2
1

3
2
1

3
2
1
3
2
1
10
9
8
7
6
5
4
3
2
1

The rmistor1 CL CL CL Ambie nt

C LOC K
R EADY

+2 4V
+2 4V
B R AKE
ST AR T/ STO P
C W/C C W

GND
GND
NC

Te mp
Pickup Re gi Cove r Se nsor
MP MP Exit Pa pe r Cove r
Clutch Clutch Ope n EMPTY FEEDREGI
Clutch Se nsor Se nsor Outbinfull Ope n WLAN
Se nsor Se nsor SeSe
nsor
nsor
Se nsor
FUSER Unit
The rmoSta t Ma in Motor

INLET

The main controller controls all modules required to print, that is, LSU, HVPS, SMPS, FAN, Fuser, etc.

The main controller receives print data from the host through network or USB Port or fax, Scanner. It takes this information
and generates printable video bitmap data. Engine and Video controller are not separated.

The main controller adopts the A1500(600MHz) CPU, DIMM PBA on DDR3 memory and external memory to perform
printing and Scan jobs successfully.

The OPE controller displays the status of the system using 16 x 4line LCD in response to user actions or the main controller.

The HVPS supplies high voltage for developing Process. High Voltage controlled by PWM signal from CPU.

SMPS makes +5V and +24V DC from 220V or 110 AC.

WLAN module is used for wireless communication.

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-25

2. Product Specifications

Diagram of the M407xFX Series Electrical Circuit

Scanner
RADF HOOK PBA
(J C92 -02100 A)
Home
Sens or
1 N.C 1 12 N.C
RADF P a pe r De te c t SPEAKER

RCV
3. 3V
LE D_ANODE

HOOK_O FF
GND
M IC
OP E _LC D

CN(1 .5 m m)
2 GND GND 2 11 GND

S ENS OR
S e ns or 3 nS E NS_DADF_P _DE T GND 3 10 GND RADF JOINT PBA

CN(1 .5 mm)
4 LE D_ANODE

CN2(1 .5 m m)
DADF_R E GI_S OL 4 9 DADF_ R E GI_S OL 4 .3inch Touch
RADF Cove r O pe n 5
6
GND
nS E NS_DADF_COVE R_ OP E N
DADF_MODULE _ DE T
nS E NS_ DADF_P_DE T
5
6
8
7
N.C
nS E NS_ DADF_P _DE T
(JC92-02353A)
S e ns or 7 N.C
3CH CIS

3
2
1
nS E NS_ DADF_P_R E GI 7 6 nS E NS_ DADF_P _R E GI
Hands et

1
2
3
4
5
DADF_MOT _S LE E P 8 5 DADF_ MOT_ S LE E P
RADF P a pe r P os 1 LE D_ANODE
CN(1 .5 m m)
nE N_ DADF_MOT 9 4 nDADF_ MOT_ E N Model Only
S ENS OR

2 GND
S e ns or 3 nS E NS_DADF_P _P OS DADF_MOT _P LS 10 3 DADF_ MOT_ P LS
4 LE D_ANODE DADF_MOT _C UR R E NT 11 2 DADF_ MOT_ C UR R E NT

1
2

1
2
3
4
5
RADF P a pe r Re gi 5 GND DADF_MOT _DIR 12 1 DADF_ MOT_ DIR CN1(1.5 mm)
LSU OPE

3. 3V
VO 1
VO 2

Tx

Rx

n HOOK_ DET
G ND

1
2
3
nS E NS_DADF_P _RE GI
S e ns or
MODEM
6
GND 1 11 GND Sca n

3. 3V
GND
n S C ANNE R_ HOM E
CN(2 mm) C N(1. 5mm) CN(2 mm)
PICKUP

24V
5V

3. 3V
3. 3V
2

LC D_ BL_ P WM
DADF _ RE GI_ SOL
n S ENS _ DADF_ P _ DE T

DADF_ M OT_ C UR R ENT

DADF _ PIC KUP _ SOL

DADF _ EXIT _ SOL

SC AN HOM E

RXD_ OP E
TXD_ OP E

n R ST_ M IC OM _ OP E
nS E NS _DADF_COVE R_OP EN

LC D_ LVDS 3 +

LC D_ LVDS _ CLK+

LC D_ LVDS 2 +

LC D_ LVDS 1 +

LC D_ LVDS 0 +
n DADF_ M OT_ S LEE P

DADF_ M OT_ P LS

n S E NS _ DADF_ P _ P OS

3 .3 V_ P S
G ND
G ND

n S ENS _ DADF_ P _ R EG

n DADF_ MO T_ EN

G ND
G ND
(Dual Beam )

LC D_ LVDS3 -

LC D_ LVDS _ C LK-

LC D_ LVDS2 -

LC D_ LVDS1 -

LC D_ LVDS0 -
GND

GND

GND

GND

GND

GND

GND

n INT_ TO UC H
GND
S DA_ TO UC H
SC L_ TO UC H
GND 10

DADF_ M OT_ M S1
DADF_ M OT_ M S2
DADF_ M OT_ DIR

n KE Y_ S OFT _ PWR
1 24 V GND BUZZER
SOL

RADF P ic k up
CL

Motor
CN(1 .5mm)
DADF_P IC KUP_S OL 3 9
2 DADF_P IC KUP_ S OL DADF_ P IC KUP_S OL (Conexant _SSF 336 )

CN3 (1 . 5 mm )
Clutc h nS E NS_DADF_COVE R_OP E N 4 8 nS E NS_DADF_COVE R_ OP E N

n Hs y n c

C LK_ LSU_ MO T
VDO_ 1 _ P

VDO_ 2 _ P
3 .3 V_ LSU

G ND

VDO_ 1 _ N
G ND

G ND

VDO_ 2 _ N
G ND
n LD_ ON

n R E ADY_ LS U
n LS U_ MOT_ E N
GND
n SH_ 1
n SH_ 2

LD_ P OWER

2 4 VS
nS E NS_ DADF_P_P OS 5 nS E NS_ DADF_P _P OS

n HOO K_ DE T

n MODE M_ INT

n M_ R ES E T
M ODEM _ SP IDI
M ODEM _ SC K

MODE M_ S PIDO

KE YC LIC K
GND
3 .3 V
7

n MO DE M_ C S
DADF_MOT _MS 1 6 6 DADF_ MOT_ MS 1
RADF Re gi
REGI

1 24 V
CL

SOL

DADF_MOT _MS 2 7 5 DADF_ MOT_ MS 2

2 DADF_R E GI_S OL
Clutc h
MT

SI
C LK

LE D_ B
VR E F
GND

GND

GND
VDD

ID

ILED

LED_ G

GND
24 V

SIG1

SIG2

SIG3

LED_ R
8 4 24 V
5V 9 3 5V
RADF E xit 1 24 V DADF_E XIT_S OL 10 2 DADF_ E XIT_ S OL STEP
ADF
CL

SOL
EXIT

2 N.C S E NS_DADF_P_S IZE 11 1 S E NS_ DADF_ P _ S IZE

20
19
18
17
16
15
14
13
12
11
10

30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
10
11
12
13
14
15
16

9
8
7

5
4
3
2
1

9
8
7
6
5
4
3
2
1
Clutc h

1
2
3
4
5
6
7
8
9
3 DADF_E XIT_ S OL

20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1

10
9
8
7
6
5
4
3
2
1
1
ADF MOT

OUT1 A
CN(2 mm)

2 OUT1 B
RADF Motor
MT 3
4
OUT2 A
OUT2 B
STEP

10

20
19
18
17
16
15
14
13
12
11
10

10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
10
11
12
13
14
15
16
17
18
19
20

10
11
12
13
14
15
16

1
2
3
4
5
6
7
8
9

9
8
7
6
5
4
3
2
1

1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9

1
2
3
4

1
2
3
4
5
6
7
8
9

M ODEM _ MOS I
MO DE M_ S C K

KEY_ CLIC K

3. 3V
n INT_ MODE M
nC S _ MODE M

n R S T_ MODE M
n HOOK_ DE T

LC D_ LVDS 3 +

LC D_ LVDS_ C LK+

LC D_ LVDS 2 +

LC D_ LVDS 1 +

LC D_ LVDS 0 +
LCD_ LVDS3 -

LC D_ LVDS _ C LK-

LCD_ LVDS2 -

LCD_ LVDS1 -

LCD_ LVDS0 -
M ODEM _ MISO

G ND

3 . 3 V_ LS U

GND

VDO_ 1 _ N
GND

GND

VDO_ 2 _ N
GND
n LD_ ON

n R EADY_ LS U
n LS U_ M OT_ E N
GND

GND

GND

GND

GND

GND

GND

GND

n INT_ TOUC H
GND
S DA_ TOUC H
SC L_ TOUC H
3 .3 V
3 .3 V
n S H_ 1
n S H_ 2

LC D_ B L_ PWM
LD_ POWE R
N. C

n KE Y_ S OFT_ P WR
n Hsy n c
R ADF_ R EG I_ S OL

R ADF_ P IC KUP _ S OL

DADF_ E XIT_ S OL

C LK_ LS U_ MOT

n SC AN HOME

R XD_ OPE
TXD_ OPE

n R S T_ MIC OM_ OE
n SE NS _RADF _COVER_OP E N

VDO_ 1 _ P

VDO_ 2 _ P

2 4 VS

3 .3 V_ PS
GND
GND

n R ADF_ M OT_ E N

GND
GND

OUT1 A

OUT2 A

B _ VIN
GND
G_ VIN
GND
R _ VIN
GND

C IS_ C LK
LE D_ C OMM ON
C IS _ BLE D
C IS_ GLE D
CIS_ R LE D
GND
R ADF_ MOT _ MS 1
R ADF_ MOT _ MS 2
2 4 V2
R ADF _ MOT_ DIR

OUT1 B

OUT2 B

SC AN_ C TR
nS E NS _ R ADF_ P _ DET

R ADF_ MOT _ CUR R E NT

n R ADF _ MOT_ S LE EP

R ADF_ MOT _ PLS

n SE NS_ R ADF_ P_ P OS

5 V_ PS

3 .3 V_ C IS
3 .3 V_ C IS

C IS _ SP
n SE NS_ R ADF _ P_ R EG
3 .3 V 3.3 V_ Cover_Open
ADF JOINT PBA
C N13 (1. 5mm)
SCAN_MTR
CN9 (FFC 1 mm)
CN5 (FFC 1 mm )
CN17 (FFC 1 mm) CN16 (FFC 1 mm) (JC92-02426A)
Front Cover C IS _ IF LS U_ IF OP E I/F (4.3 inch TOUCH LCD)
MODE M I /F
Micro Switch CN12 (1. 5mm) OUT2B 1 12 OUT2 B OUT2 B 1
OUT1B 2 11 OUT1 B OUT1 B 2
R ADF_IF
3 10 3

CN3 6(1.5 mm)

OUT2A OUT2 A OUT2 A
4 9 4
24VS EEPROM OUT1A
5
OUT1 A OUT1 A

ADF_IF
ANODE_C 8 ANODE_ C ANODE_ C 5
24 VS 12 1 24 VS
GND 11 3.3V 2 GND (64KB) ANODE_B 6
7
7
6
ANODE_ B ANODE_ B
6
7

CN8(1.5 mm)
THV_ R E AD 10 3 THV_ R E AD ANODE_A ANODE_ A ANODE_ A
4 nTHV_E N 8 5 8
nTHV_E N 9 GND GND GND
5 P WM_THV 9 4 9
HVPS P WM_THV 8 nS E NS _P _P OS nS E NS _P _P OS nS E NS _P _P OS

HVP S
6 P WM_DE V_ DC
P WM_DE V_ DC
P WM_MHV
7
6 7 P WM_MHV EEPROM DDR3 nS E NS_ C_OP N
GND
10
11
3
2
nS E NS_C_ OP N
GND
nS E NS_C_OP N
GND
10
11
Supply P WM_FUS E R_B IAS 5 8 P WM_FUS E R_B IAS
(32KB)
GND 4 9 GND DIMM nS E NS _P _DE T 12 1 nS E NS _P _DE T nS E NS _P _DE T 12

DEV GND 3 10 GND

3.3V 2 11 3 . 3V (1GB) 1 N.C
THV 3.3V_C ov e r_Ope n 1 3. 3V_ Cover_ Open 1
12 3 . 3V_ C ove r_Ope n 1
2 OP T_nC MDR E Q
Se ria l Fla sh 3 N.C
OPC MHV F AN MAIN
(4MB)
A1500 24 V1
24 V1
1
2
4 N.C

CN3 5(1. 5mm)

5V_S US P 5 GND

CN1 4(2 mm )
3
DRAWER CN 6 GND SCF
MAIN FAN
nR S T_S C F 4

S CF_IF
1 GND(FB ) 7 GND
S C F_TXD
2
3
N. C
FAN_ MAIN
NAND FLASH S C F_R XD
5
6
8
9
GND
GND
DDR3 (512MB)
nS C F_OP R
_R E Q
7 10 24 V
Va ristor 8 11 24 V
(128MB) GND
9 12 24 V
CN4 (2 m m)

1 GND GND

C4N 10 13 5V
C RUM

GND
S CRUM 2
3
S C L1
S DA1 25 MHz
14 5V
M MAIN CLK MX0P 1 15 5V
D CRUM /IF PBA
4 3.3V_ C R UM
25 MHz MX0N 2 16 OP T_nR E S E T

CN2 0 NE TWORK_IF
17 OP T_R XD
FUSER N. C 6 12MHz MX1P 3
MX2P 4 18 OP T_TXD
BIAS DRUM N. C 5
MX2N 5
CN38 (1 .5 mm)

Z-CRUM GND 4 1 GND

Z-C R UM

S CL 3 2 S C L1 Ne twork MX1N 6
MX3P 7
3.3 V_ C R UM 2 3 3 . 3V_ C R UM
S DA 1 4 S DA
RTC CLK
RTL8211E MX3N 8
GND 9
LE D1 10

MAIN
CN30 (2 m m)

T LE D0 11
S MP S FAN

DEVELOPER Unit 1 24 VS
32.7KHz 3.3 V_ P S 12
F AN 2 F AN_S MP S (F/B)
GND 13
GND 14
S MP S

US B_IF
VB US 1

CN21
DM 2
DP 3 00
P AR ALLE L

GND 4
P AR ALLEL 1 5V
CN10

OP TION
2
3
N. C
GND US B 2.0 USB HUB
4 5V

SMPS
CN26 (2mm)

GND 1 5 GND CN6(2mm)

24 VS CN24 (2mm )
CN31(2mm) CN1( 1.5mm )
Cover Open
C N19(2mm ) CN27( 2mm )
E XIT
CN2( 1.5mm )
OUTBIN FULL
CN28( 2mm )
AIR
CN37 33CN16 CN15 CN32
24V OFF 2 4 24 V OFF
S MP S

SENSOR
SM PS

MAIN MOTOR MP USB_IF USB_IF USB_IF

CN

THE RM
R e la y 3 3 R e la y_AC _ON S E NS OR S E NS OR COVE R OP E N TE MP
SD CARD_IF
24 VS 4 2 24 VS

nSE NS _ P_ EXIT

n SE NS _ P_ E MP T Y
MAIN_BLDC_CLK

nSENS_Co_Op en

3.3 V_C _ OPE N1

3.3 V_C _ OPE N2
n SE NS _ BI N_F ULL
V_P ROTE CT_ ON

n SE NS _ P_ FE E D
M OT_ R EADY

M P_ C LUTC H
Fus e r ON Fus e r ON

S D_ PWR _ 3 .3
n SE NS _ P_ RE GI
P IC KUP _ C LT

5 1
FUSER ON
n M OT_ DIR

R E GI_ C LT

S ENS _MP
n M OT_ E N
T HE R M_ 1

AMB IE NT

S D_ CM D
DETE C T
3. 3V_ P S

3. 3V_ P S

S D_ CLK
3.3 V_ PS
1 5 V_S MP S

S D_ D2
S D_ D3

S D_ D0
S D_ D1
1
(3 .9 6 m m)

5V_S MP S
CN22

3. 3VS

3. 3VS

3. 3VS

3. 3VS

VB US

VB US
24 VS
2 4 VS
2 4 VS

2 4 VS

2 4 VS

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND
GND

GND

GND
GND
GND
GND
2 GND
SM PS

GND
GND
GND
GND

3.3 V
GND 2

DM

DM

DM

N.C
N.C
S MP S
CN

DP

DP

DP
3 24 V1
24 V1 3
GND 4 GND
4
24V 24 V2

10
11
12
13
14
5
1
2

10

11
12

13
14

1
2
3

1
2

3
4
5

1
2
3

1
2
3

4
5

1
2
3

4
5
6

7
8
9

1
2

1
2
3
4

1
2
3
4
5
6
7
8
9
24 V2
1
2
3
4
5
6
7
8
9

1
2
3
4

1
2
3
4
5
6
5

5V_SMPS

3 .3 V_Co ver_Op en 2
INLE T FUS E R
L

N
L

3
2
1

3
2
1
3
2
1

3
2
1

3
2
1
3
2
1

3
2
1
10
9
8
7
6
5
4
3
2
1

The rmistor1 CL CL CL Ambie nt

C LOC K
R EADY

GND
GND
+2 4 V
+2 4 V
NC
B R AKE
S TAR T/ ST OP
C W/ C CW

Te mp
Pickup Re gi Cove r Se nsor
MP MP Exit Pa pe r Cove r
Clutch Clutch Ope n EMPTY REGI FEED XOA :16GB
Clutch Se nsor Se nsor Outbinfull Ope n Direct WLAN EDI
Se nsor Se nsor Se nsor Se nsor FALCON : 4GB
Se nsor USB
FUSER Unit SD CARD
The rmoSta t Ma in Motor

INLET

The main controller controls all modules required to print, that is, LSU, HVPS, SMPS, FAN, Fuser, etc.

The main controller receives print data from the host through network or USB Port or fax, Scanner. It takes this information
and generates printable video bitmap data. Engine and Video controller are not separated.

The main controller adopts the CHORUS4N(1GHz) CPU, A1500(600MHz), DIMM PBA on DDR3 memory to perform
printing jobs successfully.

The OPE Controller displays the status of the system using 4.3inch TFT LCD in response to user actions or the Main
controller.

The HVPS supplies high voltage for developing process. High Voltage controlled by PWM signal from CPU.

SMPS makes +5V and +24V DC from 220V or 110 AC.

2-26 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

Main Circuit Board Locations

The following diagrams show the locations of the printer circuit boards :

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-27

2. Product Specifications

2.2.5.1. Main Controller (M337x_M387x_M407xFR_M4072FD)

ProXpress M332x series / M382x series / M402xFR /M4072FD main controller is composed with below components.

• A1500 : To generate the printable video data and control engine / Embedded USB2.0 device
• DDR3 SODIMM : 256MB
External DDR3 SODIMM : 512MB (Not supply for SL-M4070FX/4075FX)

• Ethernet PHY : Network printing

• NAND Flash : Program memory (128MB)
• MicroSD Memory : 4GB (SL-M4070FR/4075FR only)
The main controller manages an Electro-photography system, controls the video data of printing images from main board
to LSU, provides high-voltages and PWMs, adjusts temperature in the fusing system, reads sensor signals and controls
SCF option.

The main controller also controls OPE and N/W PHY, USB Device, Wireless Module.

Main Controller Diagram

2-28 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

Main Controller connection information

• Connection
No Description No Description
1 Cover Open Sensor 17 MP
(Only for (Not apply for SL-M3370FD/3375FD)
SL-M3375FD/3875FD/3875FW/4075FR)
18 LSU
2 CRUM
19 FAN MAIN
3 FUSER
20 Direct USB
4 Outbin Full / Rear Cover Open (Only for SL-M3870FD/3875FD/3870FW/
5 Scan Motor 3875FW/4070FR/4075FR)
6 NETWORK 21 4LINE LCD OPE
7 USB Device 22 Toner CRUM
8 Parallel PWR (Only for
SL-M3375FD/3875FD/3875FW/4075FR)
9 Exit Sensor
23 FAX I/F
10 Air temp
24 WLAN
11 FAN SMPS
(Only for SL-M3870FW/3875FW)
12 MAIN Motor
25 CIS I/F
13 SCF (option)
26 RADF I/F
14 DEBUG
(Only for
15 SMPS Signal SL-M3870FW/3875FW/4070FR/4075FR)
16 SMPS Power

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-29

2. Product Specifications

No Description No Description
27 ADF I/F 29 HVPS
(Only for 30 SENSOR I/F
SL-M3370FD/3375FD/3870FD/3875FD)
28 DDR3 SODIMM

• Part Code Information

- JC92-02603M (M3375FD)
- JC92-02603N (M3370FD)
- JC92-02603P (M3875FD)
- JC92-02603Q (M3870FD)
- JC92-02603R (M3875FW)
- JC92-02603S (M3870FW)
- JC92-02603T (M4070FR)
- JC92-02603A (M4075FR)
- JC92-02603U (M4072FD)

2-30 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.2.5.2. Main Controller (M407xFX)

ProXpress M407xFX series main controller is composed with below components.

• C4N : To generate the printable video data and control engine / Embedded USB 2.0 device.
• A1500 : ZCRUM I/F
• DDR3 SODIMM : 1GB system memory
• Ethernet PHY : Network printing
• NAND Flash : Program memory (512MB)
• MicroSD Memory : 4GB
The main controller manages an electro-photography system, controls the Video Data of printing images from main board
to LSU, provides high-voltages and PWMs, adjusts temperature in the fusing system, reads sensor signals and controls
SCF option.

The main controller also controls OPE and N/W PHY, USB Device, fax, scanner.

Main Controller Diagram

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-31

2. Product Specifications

Main Controller connection information

• Connection
No Description No Description
1 OPE IF FFC 16 DEBUG OPE
2 ZCRUM (only for SL-M4075NX) 17 EXIT SENSOR
3 ZCRUM / EASY CRUM 18 MAIN MOTOR
4 FUSER 19 AIR TEMP
5 SENSOR IF 20 FAN SMPS
6 FAX 21 SCF
7 ACIS IF 22 SMPS SIGNAL
8 OUTBIN FULL / REAR COVER OPEN 23 SMPS POWER
9 RADF IF 24 MP
10 EDI 25 LSU
11 SCAN MOTOR 26 FAN MAIN
12 ETHERNET 27 HVPS
13 USB DEVICE 28 COVER OPEN SENSOR
14 PARALLEL PWR 29 DIRECT USB
15 DEBUG MAIN 30 DDR3 SO-DIMM

• Part Code Information

- JC92-02621A : PBA-MAIN

2-32 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.2.5.3. OPE Controller

The OPE controller is composed of an OPE MICOM, two status LED, ECO LED, power LED, Navigation LED, WPS
LED(SL-M3870FW/3875FW model only), 4Line LCD, 4.3inch TFT LCD(SL-M407xFX series), and some keys.

OPE communicates with main controller via UART/USB.

OPE Controller Diagram

OPE Controller Image

M337x series M407xFX
M387x series
M407xFR
M4072FD

• Part Code : JC92-02522A • Part Code : JC92-02597A

PBA Name: PBA-OPE(4Line) PBA Name: PBA-OPE MAIN(GUI)
• Part Code : JC07-00020A • Part Code : JC07-00017A
PBA Name: LCD(4Line) PBA Name: LCD(4.3inch TFT)
• Part Code : JC92-02524A
PBA Name: PBA-KEY SUB

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-33

2. Product Specifications

2.2.5.4. SO-DIMM PBA

SO-DIMM PBA is the system memory module of the main controller. It is used for the operating system, some system
application programs, and it stores some print data from the USB and Network port. There are three kinds of SO-DIMM
PBA :

• 256MB : SL-M3370FD/3375FD/3870FD/3875FD/3870FW/3875FW/4070FR/4075FR/4072FD
• 512MB : Option (Not only for SL-M4070FX, 4075FX)
• 1GB : SL-M4070FX/4075FX
• Information
• Part Code
- 256MB : JC92–02472A
- 512MB : JC92–02472B
- 1GB : JC92–02512A
• Part Name : PBA-RAM DIMM

2.2.5.5. WLAN(M387xFW model only)

The Wireless LAN Module supports 802.11b/g/n at only 3870FW/3875FW model via USB 2.0 high speed. The Module is
installed at the USB Host Channel of main controller PBA.

• Information
- Part Code : JC92–02510A
- Part Name : PBA-WNPC

2-34 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.2.5.6. ADF and RADF SUB PBA

ProXpress M337x/M387x/407x series have two types of document feeder.

M337xFD/M387xFD/M4072FD model uses ADF unit and M387xFW/M407xFR/M407xFW model uses RADF unit.

• The ADF SUB PBA is the Joint Board to Connect between ADF Module and Main board.

- Part Code : JC92-02426A

- PBA Name : PBA-ADF
• The JOINT PBA is the Joint Board to Connect between RADF Module and Main board.

- Part Code : JC92-02353A

- PBA Name : PBA-JOINT(RADF)

2.2.5.7. SCF PBA - Optional

The SCF PBA is the SCF control board. It use UART communication with main controller.

UPD70F3824 is used as a microcontroller.

• Information
- Part Code : JC92-02539B
- Part Name : PBA-SCF

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-35

2. Product Specifications

2.2.5.8. CRUM PBA

ProXpress M3370/M3870/M4070/M4072FD series use zCRUM PBA.

ProXpress M3375/M3875/M4075 series use zCRUM PBA, OPC CRUM and CRUM JOINT PBA.

CRUM PBA uses I2C communication with main controller.

M3370/M3870/M4070/M4072FD series M3375/M3875/M4075 series

2-36 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.2.5.9. Fax Board

ProXpress M337xFD, M387xFD, M387xFW, M407xFR, M4072FD series contains a fax board. The modem card is used to
transfer and receive fax data through a telephone line. This PBA is controlled by the main board and has two connectors,
one for the telephone line connection and the other for an external phone connection.

• Connection
1 Main Interface
2 Speaker
3 Hook(only China model)
4 Tel Line
5 Ext Line

• Information
- Part Code : JC92–02569A / JC92–02569B(Only China model)
- PBA Name : PBA-LIU

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-37

2. Product Specifications

2.2.5.10. SMPS Board

The SMPS (Switching Mode Power Supply) board supplies electric power to the main board and other boards. The voltage
provided includes +5V, and +24V from a 110V/220V power input.

• Specification
1) AC 110V (93.5V ~ 137V) or AC 220V (187V ~ 275V)

2) Output Current :
- +5V : 2.4A
- +24V : 3A

3) Output Power
- +5V : 8.16W
- +24V : 43.2W

4) Heat Lamp Capacity : 850W

• Information
110V 220V
SEC CODE JC44-00097E JC44-00090E
PBA NAME SMPS V1 SMPS V2

• Connection
1 INPUT_AC
2 Fuser_AC Output
3 SMPS Control Signal (from Engine PBA)
4 OUTPUT_5V&24V (to DC POWER PBA)

2-38 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.2.5.11. HVPS board

High Voltage Power Supply(HVPS) board generates high-voltage channels which includes MHV, DEV, BLADE, SUPPLY,
OPC, THV and FUSER BIAS.

• Connection
1 Main Interface 6 OPC(-51V)
2 MHV(-1240V) 7 THV(+1315V, -1000V)
3 DEV(-338V) 8 FUSER BIAS(240V)
4 BLADE(-389V)
5 SUPPLY(-489V)

• Information
- Part Code : JC44–00197A
- Part Name : HVPS

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-39

2. Product Specifications

2.2.6. Engine Firmware Control Algorithm

2.2.6.1. Feeding

If feeding from a cassette, the drive of the pickup roller is controlled by controlling the clutch. The on/off of the clutch is
controlled by controlling the general output port or the external output port. While paper moves, occurrence of Jam
is judged as below.

Item Description
JAM 0 • After picking up, paper does not reach the Feed Sensor within a predetermined time.
• After picking up, if the feed sensor is not on, re-pick up will be initiated. . After re-picking up, if the
feed sensor is not on after certain time, it is JAM 0.
• Even though the paper reaches to the feed sensor, the feed sensor does not detect the lead edge of
the paper.
JAM 1 • After the leading edge of the paper passes the feed sensor, the trailing edge of the paper does not clear
the sensor after predetermined period of time.
• After the leading edge of the paper passes the feed sensor, the paper cannot reach the exit sensor
after predetermined period of time.
* The paper exists between the feed sensor and the exit sensor.
JAM 2 • The trailing edge of the paper does not clear the exit sensor within a predetermined.

2.2.6.2. Transfer

The charging voltage, developing voltage and the transfer voltage are controlled by PWM (Pulse Width Modulation). The
each output voltage is changeable due to the PWM duty. The transfer voltage admitted when the paper passes the transfer
roller is decided by environment conditions. The resistance value of the transfer roller is changed due to the surrounding
environment or the environment of the set, and the voltage value, which changes due to the environment, is changed through
the AD converter. The voltage value for impressing to the transfer roller is decided by the changed value.

2-40 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.2.6.3. Fusing

The temperature change of the heat roller’s surface is changed to the resistance value through the use of a thermistor.
The Main Board uses the resistance value of the Thermistor and converts it to a voltage value through the use of an AD
converter, the temperature is decided based on the voltage value read. The AC power is controlled by comparing the target
temperature to the value from the thermistor. If the value from the thermistor is out of controlling range while controlling the
fusing, the error stated in the below table occurs.

• Open Heat Error

When the engine operates the warm-up process, if the temperature of the fixing unit is not higher than a specified
temperature within a predetermined time, the engine defines Open Heat Error. When this error is detected, the engine
stops all functions and keeps the error state. Also, the engine informs the error status of the main system, so it can take
appropriate action; and then the error message is displayed at LCD window or LED informing the error status of the user.

• Low Heat Error

When the engine is at stand-by, printing or warm-up mode, if the temperature of the fixing unit is lower than the
specified temperature at each state and the lower temperature state is maintained during the specified time, the engine
defines Low Heat Error. When this error is detected, the engine stops all functions and keeps it at the error state. Also,
the engine informs the error status of the main system, so it can take appropriate action; and then the error message
is displayed at LCD window or LED informing the error status of the user.

• Over Heat Error

For overall engine state, if the temperature of the fixing unit is higher than the specified temperature and the temperature
state is detected for a specific duration, then the engine defines Over Heat Error. When this error is detected, the engine
stops all functions and keeps it at the error state. Also, the engine informs the error status of the main system, so it
can take appropriate action; and then the error message is displayed at LCD window or LED informing the error
status of the user.

2.2.6.4. LSU

LSU receives the image data from PVC or HPVC and make the latent image on OPC surface. It uses the dual beam,
LD. The errors related to LSU are as follows:

• By Lready
When the printing is started, the engine drives the polygon motor of LSU. After the specified time is elapsed, if the
motor is not in a ready status, the engine detects the error that the polygon motor is not in a ready status. If this error
happens, the engine stops all functions and keeps it at the error state. Also, the engine informs the error status of the
main system and the error message is displayed at LCD window or LED informing the error status of the user.

• By Hsync
When the polygon motor is ready, the LSU sends out the signal called Hsync and used to synchronize with each image
line. So, if the engine does not detect consecutively the signal for a fixed time, it defines the Hsync Error. If this error
happens, the engine stops all functions and keeps it at the error state. Also, the engine informs the error status of the
main system and then the error message is displayed at LCD window or LED informing the error status of the user. LSU
Error Recovery: If the LReady or Hsync error happens, the paper is exited before the error code is initiated. The engine
mode is changed to recovery mode and the engine informs the main system of the engine mode. The engine rechecks
the LSU error, if the error does not reoccur printing is resumed.

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-41

2. Product Specifications

2.2.7. Software Descriptions

2.2.7.1. Software system overview

The software system of this model is constructed with

• Host Software part that the application software operated in Window and Web Environment
• Firmware parts that is a Embedded software controls printing job.

2.2.7.2. Architecture

P rin ter /MFP

HOS T
Firm ware
S o ftware

Web -b as ed S tan d -alo n e Ap p licatio n

Driver Kern el
Ap p licatio n Ap p licatio n (Em u latio n )

Host Software is made up of

1) Graphic User Interface offers the various editing functions to user in Host.

2) Driver translates the received document to a Printing Command language which printer can understand and transfers
data to spooler.

3) Stand-alone Application offers the various printing application such as Easy Printer Manager, Printer Status in Window
system.

4) Web-based-Application offers the same functions as Stand-alone Application in Web environment.

Firmware is made up of
1) Application (Emulation) that is a interpreter translates data received from Host to a printing language (PCL, PS, GDI,
etc.) to be able to make the user to take same output as originally one what composed in Host.

2) Kernel controls and manage the whole procedure including Control flow and Printing Job before transferring to Engine
system.

2-42 Copyright© 1995-2013 SAMSUNG. All rights reserved.

 2. Product Specifications

2.2.7.3. Data and Control Flow

Ho s t Firmwa re

US B
Driver

- P CL3, P S 3 Q
KERNEL
p
Web-b as ed s
- Do cument Manag ement
u
S ys tem En g in e
- Netwo rk Ad minis tratio n N Netwo rk
In terface
- S tatus Mo nito r p Ap p licatio n
- Remo te Co ntro l P anel
o
j
S tan d-alo n e
u
p Ap p licatio n
(Em u latio n )
- P rinter S etting Utility
s - P CL
- Netwo rk Ad minis tratio n - PS3

- S tatus Mo nito r

The above Block Diagram is explained that:

Host Side is made up of

1) Driver that is Windows application software translate printed data to one of printer language and create spooler file.

2) Web-based Application that offer a various printer additional functions, management of printing job, printer
administration, Status monitor to monitoring the printer status by real time in Web, independent environment on OS.

3) Stand-alone Application that is a similar Window software as same as above 2.

4) Port Monitor that manages the network communication between spooler and Network Interface Card, or various
additional application and Network Interface Card,(this is, at first, make communication logical port, manage the data,
transfer them from spooler to network port, and offer the result of printing).

Firmware Side is made up of

1) Network Interface Card is that relay the communication between Host and kernel using various network protocol.

2) Kernel is that manages the flow control of emulation procedure, receiving data from Host or Network card and printing
with engine & rendering job.

Copyright© 1995-2013 SAMSUNG. All rights reserved. 2-43

2. Product Specifications

3) Emulation is that interprets the various output data from selected emulation.

4) Engine is that prints rendered bit-map data to paper with required size and type by Kernel.

And then, for Job Spooling function for Multi-User, Multi-Printing that is occurred in Network printing and various
additional printing functions, this Kernel use max. 10 Queuing systems in a memory.

In Printing, the two procedures are

1) Case of using USB Port

• After user start to print the wanted document to PCL string or compressed GDI bit-map data, the Driver translates
the all graphic data of the client PC and send data to host spooler. And then the spooler sends the data stream to
the printer via USB port.

• Kernel receives this data from Host, and then select emulation fit to data and start selected one. After emulation job
end, Kernel sends the output bit-map data to Engine using Printer Video Controller (by clock type for LSU).

• Engine print the received data to required paper with the sequential developing process.

2) Case of using Network Interface Card

• After user start to print the wanted document to PCL string or compressed GDI bit-map data, Driver translate the
all graphic data of it and send data to host spooler.

• If so, Port monitor managing network port receives data from spooler and sends a data stream to the Network
Interface Card.

• Network interface card receives it and send to Kernel part.

• Kernel receives this data from Host, and then select emulation fit to data and start selected one. After emulation job
end, Kernel sends the output bit-map data to Engine using Printer Video Controller (by clock type for LSU).

• Engine print the received data to required paper with the sequential developing process.

2-44 Copyright© 1995-2013 SAMSUNG. All rights reserved.