TCB GRANT OF EQUIPMENT
AUTHORIZATION TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:
Nemko North America, Inc.
Date of Grant: 12/22/2018
303 River Road
Ottawa, Ontario, K1V 1H2
Application Dated: 12/22/2018
Canada
PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP
COMPANY LIMITED
Room 1508, 15/F, Office Tower II,
Grand Plaza, 625 Nathan Road
Kowloon,
Hong Kong
Attention: Peter Wang
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID
ONLY for the equipment identified hereon for use under the Commission's Rules and
Regulations listed below.
FCC IDENTIFIER: 2AJGM-DM1701
Name of Grantee: PO FUNG ELECTRONIC (HK) INTERNATONAL
GROUP COMPANY LIMITED
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: DMR Digital Radio
Frequency Output Frequency Emission
Grant Notes FCC Rule Parts Range (MHZ) Watts Tolerance Designator
EF ES 90 136.0 - 174.0 5.0 0.13 PM 7K60FXW
EF ES 90 136.0 - 174.0 5.0 0.13 PM 7K60FXD
EF ES 90 136.0 - 174.0 1.0 0.13 PM 7K60FXW
EF ES 90 136.0 - 174.0 1.0 0.13 PM 7K60FXD
EF ES 90 400.0 - 406.0 5.0 0.19 PM 7K60FXW
EF ES 90 406.1 - 470.0 5.0 0.19 PM 7K60FXW
EF ES 90 400.0 - 406.0 1.0 0.19 PM 7K60FXW
EF ES 90 406.1 - 470.0 1.0 0.19 PM 7K60FXW
EF ES 90 400.0 - 406.0 5.0 0.19 PM 7K60FXD
EF ES 90 406.1 - 470.0 5.0 0.19 PM 7K60FXD
EF ES 90 400.0 - 406.0 1.0 0.19 PM 7K60FXD
EF ES 90 406.1 - 470.0 1.0 0.19 PM 7K60FXD
Power output listed is rated conducted. This device must be restricted to work-related operations only
in an Occupational/Controlled RF exposure environment and must operate with a duty factor not
exceeding 50%. All qualified end-users of this device must have the knowledge to control their
exposure conditions and/or duration to comply with Occupational/Controlled Exposure limit and
requirements. A label, as described in this filing, must be displayed on the device to direct users to
specific training information for meeting Occupational Exposure Requirements. SAR compliance for
body-worn operating configurations is limited to the specific belt clip/ holster/accessories tested for
this filing. End-users must be informed of the body-worn accessory operating requirements for
satisfying RF exposure compliance. The highest reported SAR values for head and body-worn
accessories exposure conditions are 0.94 W/kg and 1.43 W/kg respectively.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies
as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.
