ER2 SERIES

Engineered to endure.
The ER2 electric hoist is designed for peak performance—even on the
toughest jobs in the toughest conditions. Its quiet operation and minimal
vibration lowers workplace noise pollution, helps reduce worker fatigue and
extends the life of the hoist. Practical durability at its best, the ER2 lets you
get the job done safely and worry-free.

Smart Brake Technology Variable Frequency Drive

The ER2‘s Guardian Smart Brake has an Kito’s 220 V and 440 V two-speed hoists
electrical fail-safe design that uses DC current come with a standard "under-the-cover"
to control brake activation. The fast activation variable frequency drive. This device works by
drastically reduces wear on the brake discs, varying the power to the motor, allowing you
preserving the correct brake gap. The result to adjust both the high and low speeds. The
is a maintenance-free braking system with a VFD also adds soft-start/soft-stop operation
10-year/2,000,000 activation cycle warranty. to reduce shock loads, swing and bounce,
giving you more precise load control and
EXTREME-DUTY TEFC MOTOR increasing the life of the hoist.
Equipped with thermal overload protection
and cooling fins on all four sides of the motor Count Hour Meter
housing, the ER2's totally enclosed fan- The count hour meter records the hoist’s
cooled motor (TEFC) efficiently dissipates starts and run time. This gives maintenance
heat, allowing for industry-leading duty personnel an accurate record of the hoist's
ratings. operating profile, letting them customize its
maintenance schedule to optimize the hoist’s
State-Of-The-Art Chain Technology life and improve workplace safety.
The ER2 uses Kito’s world-class, super-
strength chain. Its shorter and narrower link
profile allows for greater surface area contact,
giving it better wear resistance and overall
tensile strength.

WWW.KITO.CA | 1.888.322.KITO (5486) 1

All specifications, dimensions and drawings are available at www.kito.ca, or call our Customer Service staff for friendly and expert advice on models and options.
POWERED HOISTS &
TROLLEYS
ER2 SERIES
CAPACITY CHAIN GUIDE BRAKE
Single Speed: 1/8 to 20 metric tonnes Long-lasting, heavy-duty cast iron DC current electromagnetic brake stays
Dual Speed: 1/8 to 20 metric tonnes construction, easily replaced without engaged until powered (Industry leading
disassembling hoist 10 year warranty)
STANDARDS Minimum brake torque of 200% at full load

CSA approved
HOOKS
ASME B30.16 Forged carbon steel opens gradually
MOTOR
ASME H4 without fracturing under excessive loads. Three phase
IP55 dust-tight and watertight Bottom hook swivels 360 degrees Standard Voltage: 220/440/575 volts
Self-closing top and bottom hooks with 60 hertz
OPTIONS heavy-duty hook latch Class B
Extreme duty, totally enclosed, fan-cooled
Plastic, canvas or steel chain containers
Long lift chain container
CONTROLS (TEFC) squirrel cage
Motor fin, fan blade and fan cover design
Lift lengths can be customized to suit Controls located on a central electrical for optimum air flow
requirements panel
Plain, geared, or motorized trolley mount Control Voltage: 110 volts
Simple to operate plug-in connectors
OVERLOAD PROTECTION
BODY Adjustable, dual-speed, under-the-cover Friction clutch located in the gearbox
VFD (220 and 440 volt dual speed between motor and load gear prevents
Die cast aluminum frame models) damage to hoist in the event of excessive
Completely sealed body for environmental (Optional) Ergonomic Cylinder Control overloading
protection Ideal for repetitive tasks- available in
Low headroom Adjustable 2-speed (220/440 volt) Dual OVERTRAVEL
Speed (575 volt)
GEARS PROTECTION
Precision, induction-heated, durable alloy ERGONOMIC Limit switch disables controls when load
block reaches upper or lower travel limit
steel helical gears submersed in an oil PUSHBUTTON STATION
bath
Impact-resistant plastic with molded strain OPERATING CONDITIONS
relief to prevent damage from pulling on
LOAD CHAIN the push button cord Recommended for -20˚ to +40˚ C and
IP65 dust-tight and watertight humidity of 85% or lower
Ultra-strong high-performance nickel-
plated load chain, with unique short link
pitch for greater resistance to fatigue and BEARINGS
wear, and corrosion resistant
High-quality, anti-friction ball and roller
Grade 80
design

WWW.KITO.CA | 1.888.322.KITO (5486) 2

All specifications, dimensions and drawings are available at www.kito.ca, or call our Customer Service staff for friendly and expert advice on models and options.
POWERED HOISTS &
TROLLEYS
ER2
SINGLE SPEED - 220/440/575V
HOOK MOUNT

Hook Mount Double Fall; *For Hook Mount Single Fall; *For
informational purposes only, contact informational purposes only, contact
KITO for dimensional drawing KITO for dimensional drawing

DIMENSIONS
Capacity (tonne) Model C (in.) D a b d e f g h i
1/8 ER2001H 13.8 430 478 321 219 259 260 27 99 93
1/4 ER2003S 13.8 430 478 321 219 259 260 27 99 93
1/2 ER2005L 14.5 490 513 348 242 271 283 27 113 106
1/2 ER2005S 14.5 490 510 348 242 268 283 27 113 106
1 ER2010L 17 550 589 376 291 298 335 31 129 118
1 ER2010S 17 550 598 376 291 307 335 31 129 118
1½ ER2015S 20 630 646 427 308 338 384.5 34 160.5 137.5
2 ER2020L 22.5 630 646 427 308 338 384.5 39 160.5 137.5
2 ER2020S 23 630 703 427 347 356 384.5 39 160.5 137.5
2½ ER2025S 24.5 840 736 445 337 399 437.5 39 173.5 142.5
3 ER2030S 30 920 703 427 347 356 397 44 216 82
5 ER2050S 33 920 736 445 337 399 439.5 47 231.5 84.5

SPECIFICATIONS
Rated Current
Speed (ft/min) (amps)
Capacity Standard Hoist Trolley Hoist Motor Headroom Load Chain Load Chain Ship Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing H.P. (in) 220V 440V 575V Code Falls Weight (lbs) of Lift (lbs)

⅛ ER2001H 10 55 ----- 0.75 13.8 3.4 1.7 1.4 KER2043 1 58 1.4

¼ ER2003S 10 36 ----- 0.75 13.8 3.4 1.7 1.4 KER2043 1 58 1.4
½ ER2005L 10 15 ----- 0.75 14.6 3.4 1.7 1.4 KER2060 1 73 2.7
½ ER2005S 10 29 ----- 1.2 14.6 4.8 2.5 1.8 KER2060 1 81 2.7
1 ER2010L 10 14 ----- 1.2 17 4.8 2.5 1.8 KER2077 1 106 4.5
1 ER2010S 10 28 ----- 2.4 17 8.6 4.2 3.3 KER2077 1 121 4.5
1½ ER2015S 10 18 ----- 2.4 20.1 8.6 4.2 3.3 KER2102 1 160 8
2 ER2020L 10 14 ----- 2.4 22.6 8.6 4.2 3.3 KER2102 1 163 8
2 ER2020S 10 28 ----- 4.7 23.2 16.4 7.9 6.2 KER2102 1 202 8
2½ ER2025S 10 22 ----- 4.7 24.6 16.4 7.9 6.2 KER2112 1 229 9.5
3 ER2030S 10 17 ----- 4.7 31 16.4 7.9 6.2 KER2102 2 235 16
5 ER2050S 10 11.5 ----- 4.7 33.5 16.4 7.9 6.2 KER2112 2 290 19
10 ER2100S 10 11.5 ----- 4.7 x 2 53.9 16.4 7.9 6.2 KER2112 4 668 38
x2 x2 x2
ER2
DUAL SPEED HOIST - 575V
HOOK MOUNT

Hook Mount Double Fall; *For Hook Mount Single Fall; *For
informational purposes only, contact informational purposes only, contact
KITO for dimensional drawing KITO for dimensional drawing

DIMENSIONS
Capacity (tonne) Model C (in.) D a b d e f g h i j k
⅛ ER2001HD 14 430 478 321 219 259 260 27 99 93 167 152
¼ ER2003SD 14 430 478 321 219 259 260 27 99 93 167 152
½ ER2005LD 14.5 490 513 348 242 271 283 27 113 106 191 174
½ ER2005SD 14.5 490 533 348 242 291 283 27 113 106 191 174
1 ER2010LD 17 550 589 376 291 298 335 31 129 118 211 192
1 ER2010SD 17 550 615 376 291 324 335 31 129 118 211 192
1½ ER2015SD 20 630 646 427 308 338 384.5 34 160.5 137.5 241 230
2 ER2020LD 22.5 630 646 427 308 338 384.5 39 160.5 137.5 241 230
2 ER2020SD 23 630 737 427 347 390 384.5 39 160.5 137.5 241 230
2½ ER2025SD 24.5 840 736 445 337 399 437.5 39 173.5 142.5 265 248
3 ER2030SD 31 920 737 427 347 390 397 44 216 82 241 230
5 ER2050SD 33.5 920 736 445 337 399 439 47 231.5 84.5 265 248

SPECIFICATIONS
Speed (ft/min)
Capacity Standard Hoist Trolley Hoist Motor Headroom Rated Current Load Chain Load Chain Ship Weight Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing H.P. (in) (amps) Code Falls (lbs) of Lift (lbs)
⅛ ER2001HD 10 57/14 ----- 0.7/0.2 13.8 1.4/0.9 KER2043 1 68 1.4
¼ ER2003SD 10 28/7 ----- 0.7/0.2 13.8 1.4/0.9 KER2043 1 68 1.4
½ ER2005LD 10 14/4 ----- 0.7/0.2 14.6 1.4/0.9 KER2060 1 86 2.7
½ ER2005SD 10 28/7 ----- 1.2/0.3 14.6 1.7/1.4 KER2060 1 95 2.7
1 ER2010LD 10 14/4 ----- 1.2/0.3 17 1.7/1.4 KER2077 1 123 4.5
1 ER2010SD 10 28/7 ----- 2.4/0.6 17 3.2/2.0 KER2077 1 130 4.5
1½ ER2015SD 10 19/5 ----- 2.4/0.6 20 3.2/2.0 KER2102 1 165 8
2 ER2020LD 10 14/4 ----- 2.4/0.6 22.6 3.2/2.0 KER2102 1 169 8
2 ER2020SD 10 27/6 ----- 4.7/1.2 23 6.0/3.4 KER2102 1 216 8
2½ ER2025SD 10 22/5 ----- 4.7/1.2 24.6 6.0/3.4 KER2112 1 238 9.5
3 ER2030SD 10 17/4 ----- 4.7/1.2 31 6.0/3.4 KER2102 2 249 16
5 ER2050SD 10 11/2 ----- 4.7/1.2 33.5 6.0/3.4 KER2112 2 295 19

WWW.KITO.CA | 1.888.322.KITO (5486) 4

All specifications, dimensions and drawings are available at www.kito.ca, or call our Customer Service staff for friendly and expert advice on models and options.
POWERED HOISTS &
TROLLEYS
ER2
ADJUSTABLE 2-SPEED (VFD) HOIST - 220V, 440V
HOOK MOUNT

Hook Mount - Dual Fall VDF; * For Hook Mount - Single Fall VFD; * For
informational purposes only, contact informational purposes only, contact
KITO for dimensional drawing KITO for dimensional drawing

DIMENSIONS
Capacity (tonne) Model C (in.) D a b d e f g h i j k
⅛ ER2001IH 13.8 520 535 345 276 259 284 27 99 117 167 152
¼ ER2003IS 13.8 520 535 345 276 259 284 27 99 117 167 152
½ ER2005IL 14.6 600 571 348 300 271 283 27 113 106 191 174
½ ER2005IS 14.6 600 568 348 300 268 283 27 113 106 191 174
1 ER2010IL 17 720 614 376 316 298 335 31 129 118 211 192
1 ER2010IS 17 720 623 376 316 307 335 31 129 118 211 192
1½ ER2015IS 20.1 840 710 427 372 338 384.5 34 160.5 137.5 241 230
2 ER2020IL 22.6 840 710 427 372 338 384.5 39 160.5 137.5 241 230
2 ER2020IS 23.2 840 767 427 411 356 384.5 39 160.5 137.5 241 230
2½ ER2025IS 24.6 840 800 445 401 399 437.5 39 173.5 142.5 265 248
3 ER2030IS 33 920 767 427 411 356 397 44 216 82 241 230
5 ER2050IS 36 920 800 445 401 399 439 47 231.5 84.5 265 248

SPECIFICATIONS
Rated Current
Lift Speed (ft/min) (amps)
Capacity Standard Hoist Trolley Hoist Motor Headroom Load Chain Load Chain Ship Weight Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing H.P. (in) 220V 440V Code Falls (lbs) of Lift (lbs)

⅛ ER2001IH 10 55/9 ----- 0.75 13.8 3.6 1.8 KER2043 1 58 1.4

¼ ER2003IS 10 36/6 ----- 0.75 13.8 3.6 1.8 KER2043 1 58 1.4
½ ER2005IL 10 15/2.5 ----- 0.75 14.6 3.6 1.8 KER2060 1 70 2.7
½ ER2005IS 10 28/5 ----- 1.2 14.6 5.1 2.7 KER2060 1 79 2.7
1 ER2010IL 10 14/2.5 ----- 1.2 17 5.1 2.7 KER2077 1 101 4.5
1 ER2010IS 10 27/4.5 ----- 2.4 17 9.1 4.5 KER2077 1 117 4.5
1½ ER2015IS 10 17/3 ----- 2.4 20.1 9.1 4.5 KER2102 1 160 8
2 ER2020IL 10 14/2.5 ----- 2.4 22.6 9.1 4.5 KER2102 1 163 8
2 ER2020IS 10 27/4.5 ----- 4.7 23.2 17.3 8.3 KER2102 1 198 8
2½ ER2025IS 10 22/3.5 ----- 4.7 24.6 17.3 8.3 KER2112 1 220 9.5
3 ER2030IS 10 17/3 ----- 4.7 33 17.3 8.3 KER2102 2 231 16
5 ER2050IS 10 11/2 ----- 4.7 36 17.3 8.3 KER2112 2 282 19

|
ER2
SINGLE SPEED - LARGE CAPACITY- 220/440/575V
HOOK MOUNT

Large Capacity; *For informational

purposes only, contact KITO for
dimensional drawing

DIMENSIONS
Capacity (tonne) Model C ( Inches) D a b d e f g h i j k
10 ER2100S 54 1210 798 956 399 399 849 80 424.5 424.5 265 248
15 ER2150S 63 1520 798 1129 399 399 1022 86 511 511 265 248
20 ER2200S 67 1600 798 1305 399 399 1198 102 599 599 265 248

SPECIFICATIONS
Rated Current
Speed (ft/min) (amps)
Capacity Standard Hoist Trolley Hoist Motor Headroom Load Chain Load Chain Ship Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing H.P. (in) 220V 440V 575V Code Falls Weight (lbs) of Lift (lbs)
10 ER2100S 10 11 . 4.7 x 2 54 16.4 7.9 x 6.2 x KER2112 4 668 37
x2 2 2
15 ER2150S 10 7.5 . 4.7 x 2 63 16.4 7.9 x 6.2 x KER2112 6 890 57
x2 2 2
20 ER2200S 10 5.5 . 4.7 x 2 67 16.4 7.9 x 6.2 x KER2112 8 1050 74
x2 2 2

WWW.KITO.CA | 1.888.322.KITO (5486) 6

All specifications, dimensions and drawings are available at www.kito.ca, or call our Customer Service staff for friendly and expert advice on models and options.
POWERED HOISTS &
TROLLEYS
ER2
SINGLE SPEED - 220/440/575V
PLAIN TROLLEY MOUNT

Dual Fall, Plain Trolley Mount; *For Single Fall, Plain Trolley Mount; *For
informational purposes only, contact informational purposes only, contact
KITO for dimensional drawing KITO for dimensional drawing

DIMENSIONS
Capacity (tonne) Model C D a b g h i j k m n q r u
1/8 ER2001H 15.6 570 204 182 27 82 60 21 84 23.5 152 321 167 478
1/4 ER2003S 15.6 570 204 182 27 82 60 21 84 23.5 152 321 167 478
1/2 ER2005L 16.3 650 204 182 27 82 60 21 84 23.5 174 348 191 513
1/2 ER2005S 16.3 650 204 182 27 82 60 21 84 23.5 174 348 191 510
1 ER2010L 18.5 770 249 236 31 106 71 28 112 31 192 376 211 589
1 ER2010S 18.5 770 249 236 31 106 71 28 112 31 192 376 211 589
1½ ER2015S 22 900 300 280 34 127 85 34 131 36.5 230 427 241 646
2 ER2020L 25 900 300 280 39 127 85 34 131 43.5 230 427 241 646
2 ER2020S 25.6 900 300 280 39 127 85 34 131 43.5 230 427 241 703
2½ ER2025S 27 890 320 324 39 148 100 36 152 43.5 248 445 265 736
3 ER2030S 31 910 320 324 44 148 100 36 152 47.5 230 427 241 703
5 ER2050S 33 910 297 400 47 169 118 46 178 56 248 445 265 736

SPECIFICATIONS
Rated Current
Speed (ft/min) (amps)
Ship
Capacity Standard Hoist Trolley Hoist Motor Headroom Load Chain Load Weight Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing H.P. (in) 220V 440V 575V Code Chain Falls (lbs) of Lift (lbs)

1/8 ER2SP001H 10 55 . 0.75 15.6 3.4 1.7 1.4 KER2043 1 70 1.4

1/4 ER2SP003S 10 36 . 0.75 15.6 3.4 1.7 1.4 KER2043 1 70 1.4
1/2 ER2SP005L 10 15 . 0.75 16.3 3.4 1.7 1.4 KER2060 1 84 2.7
1/2 ER2SP005S 10 29 . 1.2 16.3 4.8 2.5 1.8 KER2060 1 92 2.7
1 ER2SP010L 10 14 . 1.2 18.5 4.8 2.5 1.8 KER2077 1 123 4.5
1 ER2SP010S 10 28 . 2.4 18.5 8.6 4.2 3.3 KER2077 1 138 4.5
1 1/2 ER2SP015S 10 18 . 2.4 22 8.6 4.2 3.3 KER2102 1 192 8
2 ER2SP020L 10 14 . 2.4 25 8.6 4.2 3.3 KER2102 1 194 8
2 ER2SP020S 10 28 . 4.7 25.6 16.4 7.9 6.2 KER2102 1 236 8
2 1/2 ER2SP025S 10 22 . 4.7 27 16.4 7.9 6.2 KER2112 1 287 9.5
3 ER2SP030S 10 17 . 4.7 31 16.4 7.9 6.2 KER2102 2 295 16
5 ER2SP050S 10 11.5 . 4.7 33 16.4 7.9 6.2 KER2112 2 412 19

|
ER2
DUAL SPEED HOIST - 575V
PLAIN TROLLEY MOUNT

Dual Fall; *For informational purposes Single Fall; *For informational

only, contact KITO for dimensional purposes only, contact KITO for
drawing dimensional drawing

DIMENSIONS
Capacity (tonne) Model a b C (Inches) D g h i j k m n q r u
1/8 ER2SP001HD 204 182 15.6 570 27 82 60 21 84 23.5 152 321 167 478
1/4 ER2SP003SD 204 182 15.6 570 27 82 60 21 84 23.5 152 321 167 478
1/2 ER2SP005LD 204 182 16.3 650 27 82 60 21 84 23.5 174 348 191 513
1/2 ER2SP005SD 204 182 16.3 650 27 82 60 21 84 23.5 174 348 191 533
1 ER2SP010LD 249 236 18.5 770 31 106 71 28 112 31 192 376 211 589
1 ER2SP010SD 249 236 18.5 770 31 106 71 28 112 31 192 376 211 615
1 1/2 ER2SP015SD 300 280 22 900 34 127 85 34 131 36.5 230 427 241 646
2 ER2SP020LD 300 280 25 900 39 127 85 34 131 43.5 230 427 241 646
2 ER2SP020SD 300 280 25.6 900 39 127 85 34 131 43.5 230 427 241 737
2 1/2 ER2SP025SD 320 324 27 890 39 148 100 36 152 43.5 248 445 265 736
3 ER2SP030SD 320 324 31 910 44 148 100 36 152 47.5 230 427 241 737
5 ER2SP050SD 297 400 33 910 47 169 118 46 178 56 248 445 265 736

SPECIFICATIONS
Rated Current
Speed (ft/min) (amps)
Capacity Standard Hoist Trolley Hoist Headroom Load Chain Load Chain Ship Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing Motor H.P. (in) 575V Code Falls Weight (lbs) of Lift (lbs)

1/8 ER2SP001HD 10 57/14 . 0.7/0.2 15.6 1.4/0.9 KER2043 1 79 1.4

1/4 ER2SP003SD 10 28/7 . 0.7/0.2 15.6 1.4/0.9 KER2043 1 79 1.4
1/2 ER2SP005LD 10 14/4 . 0.7/0.2 16.3 1.4/0.9 KER2060 1 97 2.7
1/2 ER2SP005SD 10 28/7 . 1.2/0.3 16.3 1.7/1.4 KER2060 1 106 2.7
1 ER2SP010LD 10 14/4 . 1.2/0.3 18.5 1.7/1.4 KER2077 1 143 4.5
1 ER2SP010SD 10 28/7 . 2.4/0.6 18.5 3.2/2.0 KER2077 1 147 4.5
1 1/2 ER2SP015SD 10 19/5 . 2.4/0.6 22.4 3.2/2.0 KER2102 1 196 8
2 ER2SP020LD 10 14/4 . 2.4/0.6 25 3.2/2.0 KER2102 1 198 8
2 ER2SP020SD 10 27/6 . 4.7/1.2 25.6 6.0/3.4 KER2102 1 244 8
2 1/2 ER2SP025SD 10 22/5 . 4.7/1.2 27 6.0/3.4 KER2112 1 290 9.5
3 ER2SP030SD 10 17/4 . 4.7/1.2 31 6.0/3.4 KER2102 2 297 16
5 ER2SP050SD 10 11/2 . 4.7/1.2 33 6.0/3.4 KER2112 2 405 19

|
ER2
ADJUSTABLE 2-SPEED (VFD) HOIST - 220V, 440V
PLAIN TROLLEY MOUNT

Dual Fall; Adjustable 2-speed VFD; Single Fall; Adjustable 2-speed VFD
*For informational purposes only, Hoist - 220/440V; * For informational
contact KITO for dimensional drawing purposes only, contact KITO for
dimensional drawing

DIMENSIONS
Capacity (tonne) Hoist & Trolley Model C D a b g h i j k m n q r u
1/8 ER2SP001IH 15.6 570 204 182 27 82 60 21 84 23.5 152 345 167 535
1/4 ER2SP003IS 15.6 570 204 182 27 82 60 21 84 23.5 152 345 167 535
1/2 ER2SP005IL 16.3 650 204 182 27 82 60 21 84 23.5 174 348 191 571
1/2 ER2SP005IS 16.3 650 204 182 27 82 60 21 84 23.5 174 348 191 568
1 ER2SP010IL 18.5 770 249 236 31 106 71 28 112 31 192 376 211 614
1 ER2SP010IS 18.5 770 249 236 31 106 71 28 112 31 192 376 211 623
1 1/2 ER2SP015IS 22 900 300 280 34 127 85 34 131 36.5 230 427 241 710
2 ER2SP020IL 25 900 300 280 39 127 85 34 131 43.5 230 427 241 710
2 ER2SP020IS 25.6 900 300 280 39 127 85 34 131 43.5 230 427 241 767
2 1/2 ER2SP025IS 27 890 320 324 39 148 100 36 152 43.5 248 445 265 800
3 ER2SP030IS 31 910 320 324 44 148 100 36 152 47.5 230 427 241 767
5 ER2SP050IS 33 910 297 400 47 169 118 46 178 56 248 445 265 800

SPECIFICATIONS
Rated Current
Lift Speed (ft/min) (amps)
Capacity Standard Hoist Trolley Hoist Motor Headroom Load Chain Load Chain Ship Weight Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing H.P. (in) 220V 440V Code Falls (lbs) of Lift (lbs)

1/8 ER2SP001IH 10 55/9 . 0.75 15.6 3.6 1.8 KER2043 1 70 1.4

1/4 ER2SP003IS 10 36/6 . 0.75 15.6 3.6 1.8 KER2043 1 70 1.4
1/2 ER2SP005IL 10 15/2.5 . 0.75 16.3 3.6 1.8 KER2060 1 84 2.7
1/2 ER2SP005IS 10 28/5 . 1.2 16.3 5.1 2.7 KER2060 1 92 2.7
1 ER2SP010IL 10 14/2.5 . 1.2 18.5 5.1 2.7 KER2077 1 123 4.5
1 ER2SP010IS 10 27/4.5 . 2.4 18.5 9.1 4.5 KER2077 1 139 4.5
1 1/2 ER2SP015IS 10 17/3 . 2.4 22 9.1 4.5 KER2102 1 192 8
2 ER2SP020IL 10 14/2.5 . 2.4 25 9.1 4.5 KER2102 1 194 8
2 ER2SP020IS 10 27/4.5 . 4.7 25.6 17.3 8.3 KER2102 1 236 8
2 1/2 ER2SP025IS 10 22/3.5 . 4.7 27 17.3 8.3 KER2112 1 287 9.5
3 ER2SP030IS 10 17/3 . 4.7 31 17.3 8.3 KER2102 2 295 16
5 ER2SP050IS 10 11/2 . 4.7 33 17.3 8.3 KER2112 2 412 19

|
ER2
SINGLE SPEED - LARGE CAPACITY - 220/440/575V
PLAIN TROLLEY MOUNT

Plain Trolley Mount; *For informational Plain Trolley Mount; *For informational
purposes only, contact KITO for purposes only, contact KITO for
dimensional drawing dimensional drawing

DIMENSIONS
Capacity (tonne) Model a b C (in) D g h j k m n q u
7 1/2 ER2SP075S 488 480 46 1030 61 175 40 196.5 73 248 672 736
10 ER2SP100L 488 480 46.5 1020 80 175 77 196.5 87 248 718 736
10 ER2SP100S 488 480 46.5 1020 80 175 77 196.5 87 248 956 798
15 ER2SP150S 616 1000 51.5 1020 86 175 77 520 100 248 1129 798
20 ER2SP200S 616 1000 53 1020 102 175 77 520 112 248 1305 798

SPECIFICATIONS
Rated Current
Speed (ft/min) (amps) Ship
Capacity Standard Hoist Trolley Hoist Headroom Load Chain Load Chain Weight Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing Motor H.P. (in) 220V 440V 575V Code Falls (lbs) of Lift (lbs)
7 1/2 ER2SP075S 10 7.5 . 4.7 46 16.4 7.9 6.2 KER2112 3 650 27.5
10 ER2SP100L 10 5.5 . 4.7 46.5 16.4 7.9 6.2 KER2112 4 815 38
10 ER2SP100S 10 11 . 4.7 x 2 46.5 16.4 7.9 x 6.2 x KER2112 4 945 38
x2 2 2
15 ER2SP150S 10 7.5 . 4.7 x 2 51.5 16.4 7.9 x 6.2 x KER2112 6 1275 57
x2 2 2
20 ER2SP200S 10 5.5 . 4.7 x 2 53 16.4 7.9 x 6.2 x KER2112 8 1365 76
x2 2 2

WWW.KITO.CA | 1.888.322.KITO (5486) 10

All specifications, dimensions and drawings are available at www.kito.ca, or call our Customer Service staff for friendly and expert advice on models and options.
POWERED HOISTS &
TROLLEYS
ER2
SINGLE SPEED - 220/440/575V
MOTORIZED TROLLEY MOUNT

Dual Fall; *For informational purposes Single Fall; *For informational

only, contact KITO for dimensional purposes only, contact KITO for
drawing dimensional drawing

DIMENSIONS
Capacity (tonne) Model a B (in) C (Inches) D e f g h j k m u q
1/8 ER2M001H 179 2.25 - 6.0 14.8 550 220 315 27 130 22 109 23.5 478 505
1/4 ER2M003S 179 2.25 - 6.0 14.8 550 220 315 27 130 22 109 23.5 478 505
1/2 ER2M005L 179 2.25 - 6.0 15.6 630 220 315 27 130 22 109 23.5 513 505
1/2 ER2M005S 179 2.25 - 6.0 15.6 630 220 315 27 130 22 109 23.5 510 505
1 ER2M010L 179 2.25 - 6.0 17 730 220 315 31 130 22 109 31 589 505
1 ER2M010S 179 2.25 - 6.0 17 730 220 315 31 130 22 109 31 598 505
1 1/2 ER2M015S 184 3.25 - 7.0 20 830 225 325 34 125 27 118 36.5 646 535
2 ER2M020L 184 3.25 - 7.0 22 830 225 325 39 125 27 118 43.5 646 535
2 ER2M020S 184 3.25 - 7.0 23 830 225 325 39 125 27 118 43.5 703 535
2 1/2 ER2M025S 186 3.25 - 7.0 24.4 830 226 340 39 131 29 132 43.5 736 610
3 ER2M030S 186 3.25 - 7.0 32 900 226 340 44 131 29 132 47.5 703 610
5 ER2M050S 192 4.0 - 7.5 35 910 281 400 47 145 44 150 56 736 655

SPECIFICATIONS
Rated Current
Speed (ft/min) (amps) Ship
Capacity Standard Hoist Trolley Hoist Motor Headroom Load Chain Load Chain Weight Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing H.P. (in) 220V 440V 575V Code Falls (lbs) of Lift (lbs)

1/8 ER2M001H 10 55 40 0.75 14.8 6.6 3.3 2.5 KER2043 1 128 1.4
1/4 ER2M003S 10 36 40 0.75 14.8 6.6 3.3 2.5 KER2043 1 128 1.4
1/2 ER2M005L 10 15 40 0.75 15.6 6.6 3.3 2.5 KER2060 1 141 2.7
1/2 ER2M005S 10 29 40 1.2 15.6 8 4.1 2.9 KER2060 1 150 2.7
1 ER2M010L 10 14 40 1.2 17 8 4.1 2.9 KER2077 1 172 4.5
1 ER2M010S 10 28 40 2.4 17 11.8 5.8 4.4 KER2077 1 187 4.5
1 1/2 ER2M015S 10 18 40 2.4 20 11.8 5.8 4.4 KER2102 1 244 8
2 ER2M020L 10 14 40 2.4 22 11.8 5.8 4.4 KER2102 1 246 8
2 ER2M020S 10 28 40 4.7 23 19.6 9.5 7.3 KER2102 1 286 8
2 1/2 ER2M025S 10 22 40 4.7 24.4 19.6 9.5 7.3 KER2112 1 334 9.5
3 ER2M030S 10 17 40 4.7 32 19.6 9.5 7.3 KER2102 2 341 16
5 ER2M050S 10 11.5 40 4.7 35 21.5 10.4 8 KER2112 2 444 19

|
ER2
SINGLE SPEED - LARGE CAPACITY - 220/440/575V
MOTORIZED TROLLEY MOUNT

15t - 20t capacity; *For informational 7.5t - 10t capacity; *For informational
purposes only, contact KITO for purposes only, contact KITO for
dimensional drawing dimensional drawing

DIMENSIONS
Capacity (tonne) Model a B C (in) D e g h j k m n u q
7 1/2 ER2M075S 223 5.9 - 8.66 46 1020 284 61 175 87 191 73 248 736 672
10 ER2M100L 223 5.9 - 8.66 46.5 1000 284 80 175 77 191 87 248 736 728
10 ER2M100S 223 5.9 - 8.66 46.5 1020 284 80 175 77 191 87 248 798 956
15 ER2M150S 223 5.9 - 8.66 51.5 1020 284 86 175 82 520 100 265 798 1129
20 ER2M200S 223 5.9 - 8.66 53 1020 284 102 175 77 520 112 265 798 1305

SPECIFICATIONS
Rated Rated
Current Current
Speed (ft/min) Hoist (amps) (amps) Load Load Ship Weight per
Capacity Standard Hoist Trolley Motor Headroom Rated Current Chain Chain Weight additional 5ft of Lift
(tonne) Model Lift (ft) Lifting Traversing H.P. (in.) 220V (amps) 440V 575V Code Falls (lbs.) (lbs.)
7 1/2 ER2M075S 10 7.5 40 4.7 46 21.5 10.4 8 KER2112 3 625 27.5
10 ER2M100L 10 5.5 40 4.7 46.5 21.5 10.4 8 KER2112 4 695 38
10 ER2M100S 10 11 40 4.7 x 2 46.5 38 18.3 14.2 KER2112 4 878 38
15 ER2M150S 10 7.5 40 4.7 x 2 51.5 43 20.8 16 KER2112 6 1255 57
20 ER2M200S 10 5.5 40 4.7 x 2 53 43 20.8 16 KER2112 8 1380 76

WWW.KITO.CA | 1.888.322.KITO (5486) 12

All specifications, dimensions and drawings are available at www.kito.ca, or call our Customer Service staff for friendly and expert advice on models and options.
POWERED HOISTS &
TROLLEYS
ER2
ADJUSTABLE 2-SPEED (VFD) HOIST - 220V, 440V
MOTORIZED TROLLEY MOUNT

Dual Fall ER2M Adjustable 2-speed; Single Fall ER2M Adjustable 2-speed;
*For informational purposes only, *For informational purposes only,
contact KITO for dimensional drawing contact KITO for dimensional drawing

DIMENSIONS
Capacity (tonne) Model a B (in) C (Inches) D e f g h j k m u q
1/8 ER2MI001IH 179 2.25 - 6.0 14.8 550 220 315 27 130 22 109 23.5 535 505
1/4 ER2MI003IS 179 2.25 - 6.0 14.8 550 220 315 27 130 22 109 23.5 535 505
1/2 ER2MI005IL 179 2.25 - 6.0 15.6 630 220 315 27 130 22 109 23.5 571 505
1/2 ER2MI005IS 179 2.25 - 6.0 15.6 630 220 315 27 130 22 109 23.5 568 505
1 ER2MI010IL 179 2.25 - 6.0 17 730 220 315 31 130 22 109 31 614 505
1 ER2MI010IS 179 2.25 - 6.0 17 730 220 315 31 130 22 109 31 623 505
1 1/2 ER2MI015IS 184 3.25 - 7.0 20 830 225 325 34 125 27 118 36.5 710 535
2 ER2MI020IL 184 3.25 - 7.0 22 830 225 325 39 125 27 118 43.5 710 535
2 ER2MI020IS 184 3.25 - 7.0 23 830 225 325 39 125 27 118 43.5 767 535
2 1/2 ER2MI025IS 186 3.25 - 7.0 24.4 830 226 340 39 131 29 132 43.5 800 610
3 ER2MI030IS 186 3.25 - 7.0 32 900 226 340 44 131 29 132 47.5 767 610
5 ER2MI050IS 192 4.0 - 7.5 35 910 281 400 47 145 44 150 56 800 655

SPECIFICATIONS
Rated Current
Lift Speed (ft/min) (amps)
Capacity Standard Hoist Trolley Hoist Motor Headroom Load Chain Load Chain Ship Weight Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing H.P. (in) 220V 440V Code Falls (lbs) of Lift (lbs)

1/8 ER2MI001IH 10 55/9 80/13 0.75 14.8 7 3.5 KER2043 1 130 1.4
1/4 ER2MI003IS 10 36/6 80/13 0.75 14.8 7 3.5 KER2043 1 130 1.4
1/2 ER2MI005IL 10 15/2.5 80/13 0.75 15.6 7 3.5 KER2060 1 143 2.7
1/2 ER2MI005IS 10 28/5 80/13 1.2 15.6 8.5 4.4 KER2060 1 152 2.7
1 ER2MI010IL 10 14/2.5 80/13 1.2 17 8.5 4.4 KER2077 1 172 4.5
1 ER2MI010IS 10 27/4.5 80/13 2.4 17 12.5 6.2 KER2077 1 187 4.5
1 1/2 ER2MI015IS 10 17/3 80/13 2.4 20 12.5 6.2 KER2102 1 246 8
2 ER2MI020IL 10 14/2.5 80/13 2.4 22 12.5 6.2 KER2102 1 249 8
2 ER2MI020IS 10 27/4.5 80/13 4.7 23 20.7 10 KER2102 1 286 8
2 1/2 ER2MI025IS 10 22/3.5 80/13 4.7 24.4 20.7 10 KER2112 1 332 9.5
3 ER2MI030IS 10 17/3 80/13 4.7 32 20.7 10 KER2102 2 341 16
5 ER2MI050IS 10 11/2 80/13 4.7 35 22.7 11 KER2112 2 440 19

|
ER2
DUAL SPEED HOIST - 575V
MOTORIZED TROLLEY MOUNT

Dual Fall; *For informational purposes SIngle Fall; *For informational

only, contact KITO for dimensional purposes only, contact KITO for
drawing dimensional drawing

DIMENSIONS
Capacity (tonne) Model a B (in) C (Inches) D e f g h j k m u q
1/8 ER2MD001HD 179 2.25 - 6.0 14.8 550 268 315 27 130 22 109 23.5 478 505
1/4 ER2MD003SD 179 2.25 - 6.0 14.8 550 268 315 27 130 22 109 23.5 478 505
1/2 ER2MD005LD 179 2.25 - 6.0 15.6 630 268 315 27 130 22 109 23.5 513 505
1/2 ER2MD005SD 179 2.25 - 6.0 15.6 630 268 315 27 130 22 109 23.5 533 505
1 ER2MD010LD 179 2.25 - 6.0 17 730 268 315 31 130 22 109 31 589 505
1 ER2MD010SD 179 2.25 - 6.0 17 730 268 315 31 130 22 109 31 615 505
1 1/2 ER2MD015SD 184 3.25 - 7.0 20 830 273 325 34 125 27 118 36.5 646 535
2 ER2MD020LD 184 3.25 - 7.0 22 830 273 325 39 125 27 118 43.5 646 535
2 ER2MD020SD 184 3.25 - 7.0 23 830 273 325 39 125 27 118 43.5 737 535
2 1/2 ER2MD025SD 186 3.25 - 7.0 24.4 830 274 340 39 131 29 132 43.5 736 610
3 ER2MD030SD 186 3.25 - 7.0 32 900 274 340 44 131 29 132 47.5 737 610
5 ER2MD050SD 192 4.0 - 7.5 35 910 281 400 47 145 44 150 56 736 655

SPECIFICATIONS
Speed (ft/min)
Ship
Capacity Standard Hoist Trolley Hoist Headroom Rated Current Load Chain Load Chain Weight Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing Motor H.P. (in) (amps) 575V Code Falls (lbs) of Lift (lbs)
1/8 ER2MD001HD 10 57/14 80/20 0.7/0.2 14.8 2.5/1.7 KER2043 1 143 1.4
1/4 ER2MD003SD 10 28/7 80/20 0.7/0.2 14.8 2.5/1.7 KER2043 1 143 1.4
1/2 ER2MD005LD 10 14/4 80/20 0.7/0.2 15.6 2.5/1.7 KER2060 1 158 2.7
1/2 ER2MD005SD 10 28/7 80/20 1.2/0.3 15.6 2.8/2.2 KER2060 1 170 2.7
1 ER2MD010LD 10 14/4 80/20 1.2/0.3 17 2.8/2.2 KER2077 1 198 4.5
1 ER2MD010SD 10 28/7 80/20 2.4/0.6 17 4.3/2.8 KER2077 1 203 4.5
1 1/2 ER2MD015SD 10 19/5 80/20 2.4/0.6 20 4.3/2.8 KER2102 1 255 8
2 ER2MD020LD 10 14/4 80/20 2.4/0.6 22 4.3/2.8 KER2102 1 259 8
2 ER2MD020SD 10 27/6 80/20 4.7/1.2 23 7.1/4.2 KER2102 1 308 8
2 1/2 ER2MD025SD 10 22/5 80/20 4.7/1.2 24.4 7.3/4.5 KER2112 1 348 9.5
3 ER2MD030SD 10 17/4 80/20 4.7/1.2 32 7.3/4.5 KER2102 2 359 16
5 ER2MD050SD 10 11/2 80/20 4.7/1.2 35 7.3/4.5 KER2112 2 460 19

WWW.KITO.CA | 1.888.322.KITO (5486) 14

All specifications, dimensions and drawings are available at www.kito.ca, or call our Customer Service staff for friendly and expert advice on models and options.
POWERED HOISTS &
TROLLEYS
ER2
DUAL SPEED HOIST - 575V
GEARED TROLLEY MOUNT

Dual Fall; *For informational purposes Single Fall; *For informational

only, contact KITO for dimensional purposes only, contact KITO for
drawing dimensional drawing

DIMENSIONS
Capacity (tonne) Model a b C (Inches) D g h i j k m n q r s u
1/8 ER2SG001HD 345 236 16.3 590 27 107 71 28 112 23.5 152 321 167 152 478
1/4 ER2SG003SD 345 236 16.3 590 27 107 71 28 112 23.5 152 321 167 152 478
1/2 ER2SG005LD 345 236 17 670 27 107 71 28 112 23.5 174 348 191 152 513
1/2 ER2SG005SD 345 236 17 670 27 107 71 28 112 23.5 174 348 191 152 533
1 ER2SG010LD 345 236 18.5 770 31 107 71 28 112 31 192 376 211 152 589
1 ER2SG010SD 345 236 18.5 770 31 107 71 28 112 31 192 376 211 152 615
1 1/2 ER2SG015SD 385 280 22.4 900 34 112 85 34 131 36.5 230 427 241 154 646
2 ER2SG020LD 385 280 25 900 39 112 85 34 131 43.5 230 427 241 154 646
2 ER2SG020SD 385 280 25.6 900 39 112 85 34 131 43.5 230 427 241 154 737
2 1/2 ER2SG025SD 398 324 26.8 890 39 134 100 36 152 43.5 248 445 265 157 736
3 ER2SG030SD 398 324 33 910 44 134 100 36 152 47.5 230 427 241 157 737
5 ER2SG050SD 401 400 35 910 47 144 118 46 178 56 248 445 265 156 736

SPECIFICATIONS
Speed (ft/min)
Capacity Standard Hoist Trolley Hoist Headroom Rated Current Load Chain Load Chain Ship Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing Motor H.P. (in) (amps) Code Falls Weight (lbs) of Lift (lbs)
1/8 ER2SG001HD 10 57/14 . 0.7/0.2 16.3 1.4/0.9 KER2043 1 97 1.4
1/4 ER2SG003SD 10 28/7 . 0.7/0.2 16.3 1.4/0.9 KER2043 1 97 1.4
1/2 ER2SG005LD 10 14/4 . 0.7/0.2 17 1.4/0.9 KER2060 1 114 2.7
1/2 ER2SG005SD 10 28/7 . 1.2/0.3 17 1.7/1.4 KER2060 1 121 2.7
1 ER2SG010LD 10 14/4 . 1.2/0.3 18.5 1.7/1.4 KER2077 1 152 4.5
1 ER2SG010SD 10 28/7 . 2.4/0.6 18.5 3.2/2.0 KER2077 1 156 4.5
1 1/2 ER2SG015SD 10 19/5 . 2.4/0.6 22.4 3.2/2.0 KER2102 1 205 8
2 ER2SG020LD 10 14/4 . 2.4/0.6 25 3.2/2.0 KER2102 1 207 8
2 ER2SG020SD 10 27/6 . 4.7/1.2 25.6 6.0/3.4 KER2102 1 253 8
2 1/2 ER2SG025SD 10 22/5 . 4.7/1.2 26.8 6.0/3.4 KER2112 1 299 9.5
3 ER2SG030SD 10 17/4 . 4.7/1.2 33 6.0/3.4 KER2102 2 306 16
5 ER2SG050SD 10 11/2 . 4.7/1.2 35 6.0/3.4 KER2112 2 418 19

WWW.KITO.CA | 1.888.322.KITO (5486) 15

All specifications, dimensions and drawings are available at www.kito.ca, or call our Customer Service staff for friendly and expert advice on models and options.
POWERED HOISTS &
TROLLEYS
ER2
SINGLE SPEED - 220/440/575V
GEARED TROLLEY MOUNT

Dual Fall; *For informational purposes Single Fall; *For informational

only, contact KITO for dimensional purposes only, contact KITO for
drawing dimensional drawing

DIMENSIONS
Capacity (tonne) Model a b C (Inches) D g h i j k m n q r s u
1/8 ER2SG001H 345 236 16.3 590 27 107 71 28 112 23.5 152 321 167 152 478
1/4 ER2SG003S 345 236 16.3 590 27 107 71 28 112 23.5 152 321 167 152 478
1/2 ER2SG005L 345 236 17 670 27 107 71 28 112 23.5 174 348 191 152 513
1/2 ER2SG005S 345 236 17 670 27 107 71 28 112 23.5 174 348 191 152 510
1 ER2SG010L 345 236 18.5 770 31 107 71 28 112 31 192 376 211 152 589
1 ER2SG010S 345 236 18.5 770 31 107 71 28 112 31 192 376 211 152 589
1 1/2 ER2SG015S 385 280 22.4 900 34 112 85 34 131 36.5 230 427 241 154 646
2 ER2SG020L 385 280 25 900 39 112 85 34 131 43.5 230 427 241 154 646
2 ER2SG020S 385 280 25.6 900 39 112 85 34 131 43.5 230 427 241 154 703
2 1/2 ER2SG025S 398 324 26.8 890 39 134 100 36 152 43.5 248 445 265 157 736
3 ER2SG030S 398 324 33 910 44 134 100 36 152 47.5 230 427 241 157 703
5 ER2SG050S 401 400 35 910 47 144 118 46 178 56 248 445 265 156 736

SPECIFICATIONS
Rated Current
Speed (ft/min) (amps) Ship
Capacity Standard Hoist Trolley Hoist Motor Headroom Load Chain Load Weight Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing H.P. (in) 220V 440V 575V Code Chain Falls (lbs) of Lift (lbs)

1/8 ER2SG001H 10 55 . 0.75 16.3 3.4 1.7 1.4 KER2043 1 88 1.4

1/4 ER2SG003S 10 36 . 0.75 16.3 3.4 1.7 1.4 KER2043 1 88 1.4
1/2 ER2SG005L 10 15 . 0.75 17 3.4 1.7 1.4 KER2060 1 101 2.7
1/2 ER2SG005S 10 29 . 1.2 17 4.8 2.5 1.8 KER2060 1 110 2.7
1 ER2SG010L 10 14 . 1.2 18.5 4.8 2.5 1.8 KER2077 1 132 4.5
1 ER2SG010S 10 28 . 2.4 18.5 8.6 4.2 3.3 KER2077 1 147 4.5
1 1/2 ER2SG015S 10 18 . 2.4 22.4 8.6 4.2 3.3 KER2102 1 198 8
2 ER2SG020L 10 14 . 2.4 25 8.6 4.2 3.3 KER2102 1 200 8
2 ER2SG020S 10 28 . 4.7 25.6 16.4 7.9 6.2 KER2102 1 242 8
2 1/2 ER2SG025S 10 22 . 4.7 26.8 16.4 7.9 6.2 KER2112 1 282 9.5
3 ER2SG030S 10 17 . 4.7 33 16.4 7.9 6.2 KER2102 2 295 16
5 ER2SG050S 10 11.5 . 4.7 35 16.4 7.9 6.2 KER2112 2 414 19

|
ER2
LARGE CAPACITY SINGLE SPEED - 220/440/575V
GEARED TROLLEY MOUNT

*For informational purposes only, *For informational purposes only,

contact KITO for dimensional drawing contact KITO for dimensional drawing

DIMENSIONS
Capacity (tonne) Model a b C (in) D g h j k m n q u
7 1/2 ER2SG075S 755 480 46 1230 61 155 87 197 73 248 662 736
10 ER2SG100L 755 480 46.5 1210 80 155 77 197 87 248 718 736
10 ER2SG100S 815 480 46.5 1020 80 155 77 197 87 248 956 798
15 ER2SG150S 964 1000 51.5 1230 86 155 82 520 100 248 1129 798
20 ER2SG200S 964 1000 53 1230 102 155 77 520 112 248 1305 798

SPECIFICATIONS
Rated Current
Speed (ft/min) (amps) Ship
Capacity Standard Hoist Trolley Hoist Headroom Load Chain Load Chain Weight Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing Motor H.P. (in) 220V 440V 575V Code Falls (lbs) of Lift (lbs)
7 1/2 ER2SG075S 10 7.5 . 4.7 46 16.4 7.9 6.2 KER2112 3 604 27.5
10 ER2SG100L 10 5.5 . 4.7 46.5 16.4 7.9 6.2 KER2112 4 815 38
10 ER2SG100S 10 11 . 4.7 x 2 46.5 16.4 7.9 x 6.2 x KER2112 4 873 38
x2 2 2
15 ER2SG150S 10 7.5 . 4.7 x 2 51.5 16.4 7.9 x 6.2 x KER2112 6 1245 57
x2 2 2
20 ER2SG200S 10 5.5 . 4.7 x 2 53 16.4 7.9 x 6.2 x KER2112 8 1371 76
x2 2 2

WWW.KITO.CA | 1.888.322.KITO (5486) 17

All specifications, dimensions and drawings are available at www.kito.ca, or call our Customer Service staff for friendly and expert advice on models and options.
POWERED HOISTS &
TROLLEYS
ER2
ADJUSTABLE 2-SPEED (VFD) HOIST - 220V, 440V
GEARED TROLLEY MOUNT

Dual Fall; *For informational purposes Single Fall; *For informational

only, contact KITO for dimensional purposes only, contact KITO for
drawing dimensional drawing

DIMENSIONS
Model a b C (Inches) D g h i j k m n q r s u
ER2SG001IH 345 236 16.3 590 27 107 71 28 112 23.5 152 345 167 152 535
ER2SG003IS 345 236 16.3 590 27 107 71 28 112 23.5 152 345 167 152 535
ER2SG005IL 345 236 17 670 27 107 71 28 112 23.5 174 348 191 152 571
ER2SG005IS 345 236 17 670 27 107 71 28 112 23.5 174 348 191 152 568
ER2SG010IL 345 236 18.5 770 31 107 71 28 112 31 192 376 211 152 614
ER2SG010IS 345 236 18.5 770 31 107 71 28 112 31 192 376 211 152 623
ER2SG015IS 385 280 22.4 900 34 112 85 34 131 36.5 230 427 241 154 710
ER2SG020IL 385 280 25 900 39 112 85 34 131 43.5 230 427 241 154 710
ER2SG020IS 385 280 25.6 900 39 112 85 34 131 43.5 230 427 241 154 767
ER2SG025IS 398 324 26.8 890 39 134 100 36 152 43.5 248 445 265 157 800
ER2SG030IS 398 324 33 910 44 134 100 36 152 47.5 230 427 241 157 767
ER2SG050IS 401 400 35 910 47 144 118 46 178 56 248 445 265 156 800

SPECIFICATIONS
Rated Current
Lift Speed (ft/min) (amps)
Capacity Standard Hoist Trolley Hoist Headroom Load Chain Load Chain Ship Weight Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing Motor H.P. (in) 220V 440V Code Falls (lbs) of Lift (lbs)

1/8 ER2SG001IH 10 55/9 . 0.75 16.3 3.6 1.8 KER2043 1 86 1.4

1/4 ER2SG003IS 10 36/6 . 0.75 16.3 3.6 1.8 KER2043 1 86 1.4
1/2 ER2SG005IL 10 15/2.5 . 0.75 17 3.6 1.8 KER2060 1 99 2.7
1/2 ER2SG005IS 10 28/5 . 1.2 17 5.1 2.7 KER2060 1 108 2.7
1 ER2SG010IL 10 14/2.5 . 1.2 18.5 5.1 2.7 KER2077 1 128 4.5
1 ER2SG010IS 10 27/4.5 . 2.4 18.5 9.1 4.5 KER2077 1 143 4.5
1 1/2 ER2SG015IS 10 17/3 . 2.4 22.4 9.1 4.5 KER2102 1 198 8
2 ER2SG020IL 10 14/2.5 . 2.4 25 9.1 4.5 KER2102 1 200 8
2 ER2SG020IS 10 27/4.5 . 4.7 25.6 17.3 8.3 KER2102 1 235 8
2 1/2 ER2SG025IS 10 22/3.5 . 4.7 26.8 17.3 8.3 KER2112 1 282 9.5
3 ER2SG030IS 10 17/3 . 4.7 33 17.3 8.3 KER2102 2 288 16
5 ER2SG050IS 10 11/2 . 4.7 35 17.3 8.3 KER2112 2 405 19