GENERAL NOTES

1. ALL DIMENSIONS ARE IN MILLIMETERS AND PIPE SIZE ARE IN INCHS UNLESS OTHERWISE SPECIFIED.
INSULATION PACKING
INSULATION FLANGE SHOWER HEAD 2. ALL PLUMBING MATERIALS AND INSTALLATION SHALL COMPLY WITH AMIES-S-060 AND ALL ASSOCIATED
FLANGE DOCUMENTS.
SHOWER HEAD
PIPE PIPE
3. GROUPINGS OF THREE OR MORE PLUMBING FIXTURES SHALL BE PROVIDED WITH ACCESSIBLE IN-LINE
SQUARE OR ROUND TYPE ADJUSTABLE STRAINER W/FUNNEL
SECTION SHUT-OFF VALVES IN ACCORDANCE WITH AMIES-S-060.
POLISHED NICKEL BRONZE TOP
WARM WATER

DRINKING WATER
FINISH FLOOR
DRINKING WATER
ADJUSTABLE HEAD CLAMPING COLLER SHOWER ARM
SEALANT NONCOMBUSTIBLE SLEEVE
LOWER BODY (CAULK OUTLET) PIPE SEALANT
TRAP PRIMER CONNECTION 1 ADHESIVE
90° ELBOW SHOWER FAUCET
CAULKING COMPOUND UPVC OR CPVC SOCKET
CONNECTOR SHALL BE
CONFORMED TO TYPE OF OUTLET INSULATION BOLT & NUT

FLANGE CONNECTION

P-TRAP WALL

1,100(BY FIELD)
VENT PIPE

INSULATION UNION(CxF) UPVC OR CPVC PIPE UPVC OR CPVC PIPE INSIDE OUTSIDE
PIPE TYPE 1
PIPE TYPE 2
INSECT SCREEN
SOCKET CONNECTION

UPVC PIPE
1
DRAIN PLUG FLOOR
(WHERE APPLICABLE)

UNION CONNECTION
1
REMARKS:
REMARKS:
1. ALL DIMENSION CAN BE CHANGEABLE AS PER VENDOR'S STANDARD.
REMARKS: REMARKS:
1. THESE ILLUSTRATIONS DO NOT PRECLUDE THE USE OF 2. THESE ILLUSTRATIONS DO NOT PRECLUDE THE USE OF OTHER
1. THESE ILLUSTRATIONS DO NOT PRECLUDE THE USE OF OTHER METHODS AND/OR HARDWARE. 1. THESE ILLUSTRATIONS DO NOT PRECLUDE THE USE OF OTHER METHODS AND/OR HARDWARE. METHODS AND/OR HARDWARE. METHODS AND/OR HARDWARE.

1 DRAIN FUNNEL (FUD) 1 2 PIPE CONNECTION 3 WALL VENT 4 SHOWER

TOILET PARTITION

210

BLOCK WALL

15 DRINKING WATER
DRINKING WATER

15 DRINKING WATER SPRAY WASH

FAUCET WITH
VACUUM BREAKER AUTOMATIC FLUSH VALVE AUTOMATIC FLUSH VALVE
SPRAY WASH FAUCET (BATTERY TYPE) (BATTERY TYPE)

PLAN HANGERS
FLEXIBLE HOSE

FLUSH TANK
PARTITION OF URINAL VENT PIPE
40 BALL VALVE
VACUUM BREAKER

40 BALL VALVE FLUSH TANK

2100

FINISH FLOOR FINISH FLOOR FEMALE FEMALE

OUTLET CONNECTION OUTLET CONNECTION SOIL DRAIN PIPE
SPRAY WASH
FAUCET WITH
CLOSET FLANGE VACUUM BREAKER FINISH FLOOR FINISH FLOOR

400

400
SCREW & FISHER SET FINISH FLOOR

100
SOIL DRAIN PIPE SOIL DRAIN PIPE
4" P-TRAP

RIGHT SIDE ELEVATION FRONT ELEVATION

REMARKS

REMARKS: 1. THESE ILLUSTRATIONS DO NOT PRECLUDE THE USE OF OTHER METHODS AND/OR HARDWARE. REMARKS:
2. WET FLOOR SLOPE SHALL NOT BE LESS THAN 1% (10 mm/m) AND NOT MORE THAN 2% (20 mm/m).
1. THE GIVEN HARDWARE AND/OR DIMENSIONS ARE CONCEPT DRAWING ONLY FOR REFERENCE. 1. ALL DIMENSION CAN BE CHANGEABLE AS PER VENDOR'S STANDARD.
FLOOR SLOP SHALL BE VERIFIED AND SHALL LEAVE NO WATER POND.
2. THESE ILLUSTRATIONS DO NOT PRECLUDE THE USE OF OTHER METHODS AND/OR HARDWARE. 2. THESE ILLUSTRATIONS DO NOT PRECLUDE THE USE OF OTHER METHODS AND/OR HARDWARE.

5 WATER CLOSET - WESTERN STYLE 6 WATER CLOSET - EASTERN STYLE 7 URINAL 000-HDAI-390203
PLUMBING GENERAL DETAIL-3
-003
000-HDAI-390203
-001 PLUMBING GENERAL DETAIL-1

000-HDAI-390103 PLUMBING SYMBOL & LEGEND

200
Drawing No DESCRIPTION

20 DRINKING WATER REFERENCE DRAWINGS

BLOCK WALL
BLOCK WALL
20 DRINKING WATER

WALL HANGER
305 305
FAUCET
BLOCK WALL

50 VENT PIPE 15 DRINKING WATER 50 VENT PIPE

PLAN 1 IFC 17-JAN-2024 ISSUE FOR CONSTRUCTION J.S. SONG D.K. KIM Y.B. IM
SERVICE SINK
WALL MOUNTED
TYPE
1 0 IFR 25-SEP-2023 ISSUE FOR REVIEW D.H. NOH D.K. KIM Y.B. IM
Issued Reviewed Approved
(FTV)

Rev. Step Revision Description

705

14 GA. STAINLESS FLEXIBLE Rev. Date by by by

ANGLE VALVE
STEEL BRACKET SUPPLY PIPE
965

965

(TYP.)

DRINKING WATER
BUSHING FOR
SUPPLY PIPE
AMIRAL
785

FINISH FLOOR
DRAINAGE PIPE ANGLE VALVE PROJECT
530

50 DRAINAGE PIPE

460
DRAINAGE PIPE This document is the property of AMIRAL and shall not be disclosed to third parties or reproduced without permission of the owner.

This document has been generated by an Electronic Document Management System. When printed it is considered as a for information
FINISH FLOOR only copy. The controlled copy is the screen version and it is the holder's responsibility that he/she holds the latest valid version.
FINISH FLOOR

FRONT ELEVATION RIGHT SIDE ELEVATION

ELEVATION SECTION
PLUMBING GENERAL DETAILS-2

REMARKS: REMARKS
Doc Type: DRW Discipline: HVA Phase: DE Class: 2 System / Subsystem: NA Equipment Type: NA
1. THE GIVEN HARDWARE AND/OR DIMENSIONS ARE CONCEPT DRAWING ONLY FOR REFERENCE. 1. THESE ILLUSTRATIONS DO NOT PRECLUDE THE USE OF OTHER REMARKS
Contractor Site
2. THESE ILLUSTRATIONS DO NOT PRECLUDE THE USE OF OTHER METHODS AND/OR HARDWARE. METHODS AND/OR HARDWARE. 1. THESE ILLUSTRATIONS DO NOT PRECLUDE THE USE OF OTHER METHODS AND/OR HARDWARE. Document - Reference:
-
Number :
Company Rev: Scale: Format: Sheet:
8 SERVICE SINK 9 DRINKING FOUNTAIN 10 LAVATORY (WASH BASIN) Document SA-AMI-000-HDAI-390203 1 NONE A1 002
ID :
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF AMIRAL. NO REPRODUCTION IN FULL, OR IN PART, SHALL BE OBTAINED FROM THIS DRAWING WITHOUT THE WRITTEN CONSENT OF AMIRAL.