Push Buttons and Operator Interface

Specifier’s Guide
Type XB2B 22 mm Diecast Chrome Plated

File 9001

CONTENTS
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page
General Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Non-Illuminated Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
Mushroom Operators and Yellow Contrast Plates . . . . . . . . . . . . . . . . . . . . . . . . . 317
Two Button Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
Specialty Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
Reset Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
Contact Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322
Pilot Lights and Light Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
Illuminated Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
Light Module Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
Specialty Light Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Accessories and Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331
Legend Plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
XB2B 22 mm Mounting Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
Schneider Electric Brands Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
General Characteristics

Environment
Conformity to standards XB2B, XD2P: UL 508, IEC 60947-5-1, EN60947-5-1, IEC 60337-1, IEC 60337-2, NF C 63-140, ASE 0119, ASE1003 ,
BS 4794, VDE 0660-200, CSA C 22-2 No. 14, CSA C 22-2 No. 66
Approvals UL: push buttons and selector switches NEMA / UL Type A600-Q600;
pilot lights and illuminated push buttons direct supply (120 V max.);
pilot lights and illuminated push buttons with transformer (600 V)
CSA: push buttons and selector switches NEMA / UL Type A600-Q600.
pilot lights and illuminated push buttons direct supply (120 V max.);
pilot lights and illuminated push buttons with transformer (600 V).
ASE, DEMKO, NEMKO, SEMKO, BUREAU VERITAS, SAHKOTARKASTUSKESKUS, GL, DNV, LROS
XD2P, standard version: CSA A600-Q600, LROS.
Protective treatment Standard version: TC “All climates”
Ambient temperature Operating: -25 °C to +70 °C (-13 °F to +158 °F) Storage: -40 °C to +70 °C (-40 °F to +158 °F)
Resistance to vibration 60 mm diameter mushroom head: 8 g. Other push buttons: 15 g. Small joystick controllers: 5 g (from 40 to 50 Hz)
Conforming to IEC 60068-2-6.
Resistance to shock Push buttons: 70 g. Mushroom head push-buttons: 15 g. Selector switches: 200 g. Conforming to IEC 60068-2-27.
Protection against electric shock XB2B, XD2P: Class 1, conforming to IEC 60536 and NF C 20-030.
Degree of protection NEMA / UL ratings XB2B: 1, 2, 3, 4, 4X, 12K, 13, XB2B, XD2P: IP 65: flush and protecting, illuminated and non-
conforming to IEC 60529 illuminated push buttons (mounted). IP 66: booted and mushroom head push buttons, selector switches, pilot lights and
and NF C 20-010 small joystick controllers (mounted). IP 40: double- headed push buttons (IP 65 on request).
Mechanical life Push buttons—3 million operations (Latching mushroom head push buttons: 300,000 operations. Illuminated selector
switches: 100,000 operations). The product life expressed is based on average usage and normal operating conditions.
Actual operating life will vary with conditions. The above statements are not intended to nor shall they create any express
or implied warranties as to product operation or life. For information on the limited warranty offered on this product,
please refer to Square D terms and conditions of sale found in the Square D Digest.

Contact block characteristics

Limited Availability
Nominal thermal current 10 A conforming to IEC 60947-5-1, NF C 63-140, UL 508, CSA 22-2 No. 14, VDE 0660 part 2, NEMA / UL Type A600-Q600.
Nominal insulation voltage 500 V conforming to NF C 20-040, VDE 0110, IEC 60158-1, 600 V conforming to UL 508, 600 V conforming to
CSA 22-2 No. 14.
Insulation category
Contact operation

o r re pla c e m e n t u s e o n ly .
Group C conforming to NF C 20-040 and VDE 0110.
Slow- make N.O. or slow-break N.C. with direct opening operation conforming to EN60947-5-1

F section 3.

e
s
Contact resistance ð25 m¾ conforming to: NF C 93-050 method A or IEC 60225-7 category 3.
Operating force

Terminal referencing
F o r n e w a p p li c a ti o n s , u
Flush or projecting push buttons - with 1 NO contact: 2.25 lb - with 1 NC contact: 1.8 lb
Additional contacts - N.O.: add 1 lb - N.C.: add 0.7 lb.
Conforming to CENELEC EN 50013.

XB4 (page 37 - 72)

Short circuit protection 10 A cartridge fuses, Gl or N conforming to IEC 60269-1and VDE 0660-200.

Rated power DC supply

conforming to IEC 60947-5-1 Appendix C Power broken in watts
duty categories AC11-DC11 for 1 million operations File E164353
Operating frequency: 3,600 ops/hour CCN NKCR
Load factor: 0.5 Voltage 24 V 48 V 120 V ®

AC supply (50-60 Hz) Inductive

65 W 48 W 40 W
load
File LR 44087
127 V Class 3211 03
AC Ratings, Inductive - NEMA / UL A600
220 V 24/48 V
1
millions of operations

ith = 10 A 35% Power factor Resistive 75%

06 Continuous Power factor
Break
04 Make VA VA carrying Make, Break and
Volts Amperes
Amperes Amperes continuous Marking
02 Amperes
120 60 7200 6 720 10 10
01
240 30 7200 3 720 10 10
.06
480 15 7200 1.5 720 10 10
.04
600 12 7200 1.2 720 10 10
.02 DC Ratings, NEMA / UL Type Q600
.01 Inductive and resistive
1 2 4 6 10 20 40 60 Volts Make and break Continuous
current in amperes
125 0.55 2.5
250 0.27 2.5
600 0.10 2.5

XB2B, XD2P: Screw and captive clamp terminals. Recommended torque 15.62 lb-in. Capacity: minimum 1 x 0.5 mm2
Cabling (20 AWG) solid or stranded, maximum with or without cable end: 2 x 1.5 mm2 (16 AWG) or 1 x 2.5 mm2 (14 AWG) or by
quick connector conforming to NF C 20-120 (on request).

314
© 1999 - 2000 Schneider Electric All Rights Reserved 11/00
 Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Non-Illuminated Operators

Operator
Catalog
Type Color
Number
White ZB2BA1
Flush head Black ZB2BA2
ZB2BA• Green ZB2BA3
Flush head Red ZB2BA4
Yellow ZB2BA5
Blue ZB2BA6
Grey ZB2BA8
White “I” ZB2BA131
Black “START” ZB2BA230
Black “O” ZB2BA232
Green “I” ZB2BA331
Metallic flush head
ZB2BA•9 Flush head premarked Red “O” ZB2BA432
Green “START” ZB2BA333
Green “ON” ZB2BA341

Limited Availability
Red “STOP” ZB2BA434
Red “OFF” ZB2BA435
Black ZB2BA29

ly .
Transparent flush head
ZB2BA•8

For repla c e m e n t u
(metal pusher)
s e
Metallic flush head

o n Green
Red
Yellow
ZB2BA39
ZB2BA49
ZB2BA59

w a p p li c a ti o n s , u s e Green ZB2BA38

For ne Transparent flush head Red ZB2BA48

Use with mylar circular legend (ZB2BY1kkk) Amber ZB2BA58

XB4 (page 37 - 72)

See page 333 Blue ZB2BA68
Clear ZB2BA78
White ZB2BA16
Black ZB2BA26
Guarded head Green ZB2BA36
Guarded head
ZB2BA•6 Red ZB2BA46
Yellow ZB2BA56
Blue ZB2BA66
Operating heads with black metal bezel
To order, add suffix 7 to the above references (except ZB2BP2 TO ZB2BP6).
Example: ZB2BA2 becomes ZB2BA27.

Contact Block Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . Page 322

Specialty Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 329
Application Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 314
Legend Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 333
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 331
Replacement Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 332
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 334-335

315
11/00 © 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Non-Illuminated Operators

Operator
Catalog
Type Color
Number
White ZB2BL1
Black ZB2BL2
Extended head Green ZB2BL3
Extended head
ZB2BL• Red ZB2BL4
Yellow ZB2BL5
Blue ZB2BL6
Red “O” ZB2BL432
Extended head premarked Red “STOP” ZB2BL434
Extended head Red “OFF” ZB2BL435
marked stop
Black ZB2BP2
ZB2BL434
Green ZB2BP3
Silicon booted head Red ZB2BP4
Yellow ZB2BP5
Blue ZB2BP6
Black ZB2BP02
Silicon booted head Green ZB2BP03
ZB2BP•
Neoprene booted head Red ZB2BP04
Yellow ZB2BP05
Blue ZB2BP06

Limited Availability
White ZB2BA15
Black ZB2BA25
Flush with reinforced
protection Flush with reinforced dust, damp, Green ZB2BA35
ZB2BA•5

o r re pla c e m e n t e o
and cutting oil protection

u s n ly . Red ZB2BA45

F
Yellow ZB2BA55
Blue ZB2BA65

o r n e w a p p li c a ti o n s , u s e Green ZB2BP38

F Transparent silicon booted push button Red ZB2BP48

Use with mylar circular legend (ZB2BY1kkk) Yellow ZB2BP58

XB4 (page 37 - 72)

See page 333. Blue ZB2BP68
Clear ZB2BP78
Operating heads with black metal bezel
To order, add suffix 7 to the above references (except ZB2BP2 TO ZB2BP6 and ZB2BP02 TO ZB2BP06).
Example: ZB2BL2 becomes ZB2BL27.

Contact Block Assemblies . . . . . . . . . . . . . . . . . . . . . . Page 322

Specialty Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 329
Application Information . . . . . . . . . . . . . . . . . . . . . . . . Page 314
Legend Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 333
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 331
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 332
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 334-335

316
© 1999 - 2000 Schneider Electric All Rights Reserved 11/00
 Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Mushroom Operators and Yellow Contrast Plates

Operator
Catalog
Type Size Color
Number
Black ZB2BC24
Mushroom head 40mm Green ZB2BC34
ZB2BC•
30mm Red ZB2BC44
Yellow ZB2BC54
Blue ZB2BC64
Black ZB2BC2
Green ZB2BC3
Mushroom head
40mm Red ZB2BC4
Momentary
Yellow ZB2BC5
Blue ZB2BC6
Mushroom head 60mm
ZB2BR• Black ZB2BR2
Green ZB2BR3
60mm Red ZB2BR4
Yellow ZB2BR5
Blue ZB2BR6
Mushroom head 40mm Red ZB2BS14
Key releasea 60mm Red ZB2BS24
Mushroom head Mushroom head push button
key release with trigger actionf 40mm Red ZB2BS944
ZB2BS•4 Key releasea
Mushroom head
40mm Red ZB2BS54

Limited Availability
turn to release
Premarked “EMO” 40mm Red ZB2BS5430
Mushroom head push button
with trigger actionf 40mm Red ZB2BS844
Mushroom head
Turn to release

e p la c e m e n t u s e o n ly .
For r
turn to release Mushroom head
60mm Red ZB2BS64
ZB2BS54 turn to release
Mushroom head
push-pull

e w a p p li c a ti o n s , u s e 40mm
Black
Red
ZB2BT2
ZB2BT4

For n
Premarked “EMERGENCY STOP”
Mushroom head
40mm Red
Black
ZB2BT43
ZB2BX2

XB4 (page 37 - 72)

60mm
push-pull Red ZB2BX4
Mushroom head a Key release operators come with Ronis #455 keys (quantity 2) as standard. For replacement keys see page 332. For other key
with trigger action numbers contact local field office.
turn to release
f Trigger action mushroom heads are “tamper proof” whereby a change of contact state is not possible by “teasing” or floating the
ZB2BS844
operator.
Guards / Locks
ERGEN Type Size Color
Catalog
M
C

Number
E

Metal 40 mm with finger cutout and 7 mm holes for padlocking Red ZB2BZ1804
Plastic 60 mm (for 40 mm turn to release) Yellow ZB2BZ1905
Yellow Contrast Plates
ST
OP PVC Yellow Legend Plates 60 mm diameter PVC Yellow Legend Plates 90 mm diameter
Text Language Catalog Number Text Language Catalog Number
ZB2BY8330
Blank N/A ZB2BY9101 Blank N/A ZB2BY8101
Emergency Stop English ZB2BY9330 Emergency Stop English ZB2BY8330
Arret d’Urgence French ZB2BY9130 Arret d’Urgence French ZB2BY8130
Not Aus German ZB2BY9230 Not Aus German ZB2BY8230
Parada de Emergencia Spanish ZB2BY9430 Parada de Emergencia Spanish ZB2BY8430
Arresto Emergenza Italian ZB2BY9630 Arresto Emergenza Italian ZB2BY8630

Contact Block Assemblies. . . . . . . . . . . . . . . . . . . . . . . . Page 322

Specialty Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 329
Application Information . . . . . . . . . . . . . . . . . . . . . . . . . . Page 314
Legend Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 333
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 331
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 332
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 334-335

317
11/00 © 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Lever and Key Operators

Lever Operators
Type Number of positions, actions Lever Color Catalog Number
Black ZB2BD2
2-maintained White ZB2BD201
Standard lever Red ZB2BD204
ZB2BD••• Black ZB2BD4
2-spring return
from right to left White ZB2BD401
Red ZB2BD404
Black ZB2BD3
3-maintained White ZB2BD301
Standard or Red ZB2BD304
Extended lever a Black ZB2BD5
3-spring return to center
from left and right White ZB2BD501
Extended levera Red ZB2BD504
ZB2BJ•••
Black ZB2BD8
3-spring return from
right to center White ZB2BD801
Red ZB2BD804
Black ZB2BD7
3-spring return from
left to center White ZB2BD701
Red ZB2BD704
Key Operators
Type Number of positions, actions, key removal Catalog Number
2-maintained key removal from left ZB2BG2
2-maintained key removal from left or right ZB2BG4
2-spring return from right to left, key removal from left ZB2BG6
3-maintained key removal from center ZB2BG3

Limited Availability
3-maintained key removal from left and right ZB2BG5
Key switch f 3-maintained key removal from left ZB2BG9
3-maintained key removal from all positions ZB2BG0
3-spring return left or right to center, key removal from center ZB2BG7

.
Key switch
ZB2BG••

For re pla c e m e n t u s e o n ly
3-spring return left to center key removal right
3-spring return right to center key removal center
3-spring return right to center key removal left
ZB2BG1
ZB2BG8
ZB2BG08

e w a p p li c a ti n s , u s e
Selector Switch Sequences (using contact block assemblies, page 322)
o
For n
2 Position selector switch 3 Position selector switch
Contact block guide Contact block guide

XB4 (page 37 - 72)

O X 1 N.O. (left or right) X O O 1 N.O. (left)
X O 1 N.C. (left or right) O X O 2 NC wired in series (side-by-side)
O X 1 N.O. O O X 1 N.O. (right)
and X X O 1 N.C. (right)
X O 1 N.C. O X X 1 N.C. (left)
Note: View from front of panel X O X 2 NO wired in parallel (side-by-side)

Operating heads with black metal bezel

To order, add suffix 7 to the above references.
Example: ZB2BD3 becomes ZB2BD37.

a When ordering extended lever substitute J for D. Example: ZB2BD2 becomes ZB2BJ2.
f Key selector switches come with Ronis #455 keys (quantity 2) as standard. For replacement keys see page 332. For switches
keyed with different keys, add the suffixes shown in the table below (no change in price). For other key numbers contact local field
office.

Key Number Suffix

421 12
458A 10
520 14
3131A 20

Contact Block Assemblies . . . . . . . . . . . . . . . . . . . . Page 322

Specialty Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . Page 329
Application Information . . . . . . . . . . . . . . . . . . . . . . . Page 314
Legend Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 333
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 331
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . Page 332
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 334-335

318
© 1999 - 2000 Schneider Electric All Rights Reserved 11/00
 Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Two Button Operators

Momentary operators
Catalog
Type Marked f Color
Number
Black/Red ZB2BA9124
Green/Red ZB2BA9134
I,O Black/Red ZB2BA9224
Two flush
I,O Green/Red ZB2BA9234
Two flush
ZB2BA9••• STOP, START Black/Red ZB2BA9724
STOP, START Green/Red ZB2BA9734
Black/Red ZB2BL9324
Green/Red ZB2BL9334
I,O Black/Red ZB2BL9424
One flush, one extended
I,O Green/Red ZB2BL9434
STOP, START Black/Red ZB2BL9824
STOP, START Green/Red ZB2BL9834
One flush, one extended
ZB2BL94•• f Additional markings available on special order. Contact local field office for details.
Operating heads with black metal bezel
To order, add suffix 7 to the above references.
Example: ZB2BA9124 becomes ZB2BA91247.

2 Button maintained operators

Number of Catalog
Type Button 1 Button 2
contact(s) Number

Limited Availability
1 NO-Black Black XB2BF521
Start/stop 1 NO-Black Red XB2BF551

.
ZB2BL98••

For r e p la c e m e n t u s e o n ly
Flush interlocked push buttons
(30 mm centers, maintained,
mechanically interlocked)
1
2
2
NO-Green
NO-Black
NO-Black
Red
NO-Black
NO-Red
XB2BF581
XB2BF523
XB2BF553

s e
Units include contact block(s) as shown.

For n e w a p p li c a ti o n s , u 2
2
2
NO-Green
NO-Black
NO-Black
NO-Red
NO-Black
NC-Red
XB2BF583
XB2BF525
XB2BF555

XB4 (page 37 - 72)

2 NO-Green NC-Red XB2BF585
Catalog
Type Color
Number
Replacement push button operators only Black ZB2BAW80424194002
(with no spring return in head) Green ZB2BAW80424194003
for XB2BF Red ZB2BAW80424194004

Operating heads with black metal bezel

To order, add suffix 7 to the above references.
Example: ZB2BF521 becomes ZB2BF5217.
Interlocked
XB2BF5••

Contact Block Assemblies ........................................... Page 322

Specialty Contacts ...................................................... Page 329
Application Information ................................................ Page 314
Legend Plates.............................................................. Page 333
Accessories ................................................................. Page 331
Replacement Parts ...................................................... Page 332
Dimensions ......................................................... Pages 334-335

319
11/00 © 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Specialty Operators

Operators
Catalog
Type Color
Number
Wobble sticks Black ZB2BB2
Wobble sticks
Red ZB2BB4
Potentiometer operator f Black ZB2BD922
2-maintained XD2PA12
Joystickst 2-spring return XD2PA22
Contacts supplied 4-maintained XD2PA14
4-spring return XD2PA24
Potentiometer operator
t Units come with 1 N.O. contact in each direction. Screw terminals. Contact blocks cannot be added or removed from the above
arrangements. For other requirements, contact local sales office.
f Customer to supply potentiometer, unit accepts 1/4" diameter, 1.625" (43-47 mm) length shaft potentiometer.

2 Position 4 Position

OPERATED X OPERATED X
CENTER CENTER

X X

OPERATED

OPERATED
CENTER
CENTER
CENTER CENTER

OPERATED X OPERATED X

Limited Availability
These 2 direction and 4 direction position charts are viewed from behind the panel, thereby reversing
Joysticks east and west positions. When lever is moved away from center, only one contact changes from N.O.
to N.C. The other contact blocks in the switch are unaffected.

e pla c e m e n t u s e o n ly .
For r Two step push buttons (contacts supplied)

e
For n e w a p p li c a ti o
Type
n s , u s Contact
1st step
N.O.
Contact
2nd step
N.O.
Catalog
Number
XB2BAk41

XB4 (page 37 - 72)

N.O. N.C. XB2BAk42
Flush head
N.O.+N.C. N.O. XB2BAk43
N.O.+N.C. N.O.+N.C. XB2BAk44
k Replace k with desired color head. (1-white, 2-black, 3-green, 4-red, 5-yellow, 6-blue).
Two position toggle switch (maintained)
Catalog
Type Color
Number
Two position toggle switch
Black ZB2BD28
NEMA Type 1 only
Operating heads with black metal bezel
To order, add suffix 7 to the above references.
Example: ZB2BD922 becomes ZB2BD9227.

Contact Block Assemblies . . . . . . . . . . . . . . . . . . . . . . . . Page 322

Specialty Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 329
Application Information. . . . . . . . . . . . . . . . . . . . . . . . . . . Page 314
Legend Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 333
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 331
Replacement Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 332
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 334-335

320
© 1999 - 2000 Schneider Electric All Rights Reserved 11/00
 Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Reset Operators

Reset operators
Adjustable Catalog
Type Description Color
length of rod Number
Black XB2BA821
0.24" - 0.63"
XB2BA8kk Red XB2BA841
0.39" (10 mm) Travel (6 - 16 mm)
Panel thickness: 0.04" - 0.12" (1-3 Blue XB2BA861
mm) Black XB2BA822
Tightened by nut 0.63" - 1.02"
Red XB2BA842
(16 - 26 mm)
Blue XB2BA862
Black XB2BA921
1.18" - 2.25"
0.55" (14 mm) Travel Red XB2BA941
(30 - 57 mm)
Panel thickness: 0.04" - 0.23" (1-6 Blue XB2BA961
mm)
Tightened by 2 screw mounting Black XB2BA922
2.16" - 3.23"
base (supplied) Red XB2BA942
XB2BA9kk (55 - 82 mm)
30 to 82 mm Blue XB2BA962
Black XB2BA923
3.15" - 4.2"
Red XB2BA943
(80 - 107 mm)
Blue XB2BA963
Black XB2BA924
4.13" - 5.2"
Flush head Red XB2BA944
(105 - 132 mm)
Blue XB2BA964
Black XB2BA925
5.12"- 6.18"
Red XB2BA945
(130 - 157 mm)
Blue XB2BA965
0.55" (14 mm) Travel
Panel thickness: 0.04" - 0.23" (1-6 Black XB2BA926
6.1" - 7.16"
mm) Red XB2BA946
(155 - 182 mm)
Tightened by 2 screw mounting Blue XB2BA966
base (supplied)
Black XB2BA927

Limited Availability
7.08" - 8.15"
Red XB2BA947
(180 - 207 mm)
Blue XB2BA967

.
XB2BA9kk

n ly
Black XB2BA928
80 to 257 mm

For rep la c e m e n t u s e o 8.07" - 9.13"

(205 - 232 mm)
Red
Blue
XB2BA948
XB2BA968

o r n e w a p p li c a ti o n s , u s e 9.05" - 10.1"
Black
Red
XB2BA929
XB2BA949

F (230 - 257 mm)

Blue XB2BA969

XB4 (page 37 - 72)

Operating heads with black metal bezel
To order, add suffix 7 to the above references.
Example: ZB2BA944 becomes ZB2BA9447.

Application Information . . . . . . . . . . . . . . . . . . . . . . . . . . Page 314

Legend Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 333
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 334-335

321
11/00 © 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Contact Blocks

Mounting base with contact block(s) “Screw clamp connection”

N.O. N.C.

Contacts
Type Catalog Number
N.O. N.C.
ZB2BZ101
1 - ZB2BZ101
1 Contact Block
- 1 ZB2BZ102
2 - ZB2BZ103
2 Contact Blocks - 2 ZB2BZ104
1 1 ZB2BZ105
Additional contact blocks
Contacts
Type Catalog Number
N.O. N.C.
For making up body assemblies 1 - ZB2BE101
ZB2BE10 k
with 3, 4, 5 or max. of 6 contact blocks
or replacing 1st or 2nd contact blockf - 1 ■ ZB2BE102

Mounting base with contact block(s) “Quick connect” t

Contacts
Type Catalog Number
N.O. N.C.
1 - ZB2BZ1013
1 Contact Block
- 1 ZB2BZ1023
2 - ZB2BZ1033
2 Contact Blocks - 2 ZB2BZ1043
1 1 ZB2BZ1053
Additional contact blocks “Quick Connect” *
Contacts
Type Catalog Number
N.O. N.C.
For making up body assemblies 1 - ZB2BE1013
with 3, 4, 5 or max. of 6 contact blocks
or replacing 1st or 2nd contact blockf - 1 ■ ZB2BE1023

Spare parts
Description Catalog Number
Mounting Base only With fixing screws ZB2BZ009
Quick Connect t Fitting by customer ZB2BZ003
ZB2BZ009
t Quick connect contact blocks will accept commercially available female quick slide connector (1 x 0.25" or 2 x 0.11")
f Non-illuminated devices can be configured with 6 contacts maximum (3 decks of 2).
■ N.C. contact is direct opening operation conforming to EN 60 947-5-1, Section 3.

Limited Availability
e p la c e m e n t u s e o n ly .
For r e
For n e w a p p li c a ti o n s , u s
XB4 (page 37 - 72)
Non-Illuminated Operators . . . . . . . . . . . . . . . . . . . Pages 315-317
Specialty Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 329
Application Information . . . . . . . . . . . . . . . . . . . . . . . . . .Page 314
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 331
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 332
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 334-335

322
© 1999 - 2000 Schneider Electric All Rights Reserved 11/00
 Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Pilot Lights and Light Modules

Pilot light heads

Catalog
Type Color
Number
White ZB2BV01
Green ZB2BV03
Standard Red ZB2BV04
ZB2BV•• Standard
Amber ZB2BV05
Blue ZB2BV06
Clear ZB2BV07
Green ZB2BV033
Red ZB2BV043
Special lens for neon and Special lens for neon and LED bulbs Amber ZB2BV053
LED bulbs Blue ZB2BV063
ZB2BV0••
Clear ZB2BV073
Green ZB2BV032
Red ZB2BV042
Glass lens (NEMA Type 1 only)
Amber ZB2BV052
Clear ZB2BV072

Pilot light modules f

Catalog
Type
Direct supply
Number
ZB2BV6 Direct supply (incandescent bulb included)t (AC/DC) ZB2BV6t
Transformer type (1.2 VA/6 V bulb included) (AC only)
24 V: 50-60 Hz ZB2BV1

Limited Availability
48 V: 50-60 Hz ZB2BV2
110 V: 50 Hz 110-120 V: 60 Hz ZB2BV3

.
127 V: 50 Hz ZB2BV91

For re p la c e m
220 V: 50 Hz

e n t u s e o
240 V: 50 Hz 220-240 V: 60 Hzn ly ZB2BV4
ZB2BV94

s e
380 V: 50 Hz ZB2BV5

u
Transformer type
ZB2BV3

For ne w a p p li
415 V: 50 Hz
c
440-480 V: 60 Hz
500 V: 50 Hz
a ti o n s , ZB2BV9
ZB2BV95
ZB2BV8

XB4 (page 37 - 72)

550-660 V: 60 Hz ZB2BV98
Resistor type (130 V bulb included).
220/250 V (AC/DC) ZB2BV7
t Complete catalog number by adding one of the following voltages: 6, 12, 24, 48 or 120 V. If desired without bulb, omit voltage.
f Light module assemblies are available with quick connectors. Add suffix “3” to end of part number.
Example: ZB2BV6 becomes ZB2BV63.

Replacement Bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 332

Application Information. . . . . . . . . . . . . . . . . . . . . . . . . Page 314
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 331
Replacement Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 332
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 334-335

323
11/00 © 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Illuminated Operators

Operator
Catalog
Type Color
Number
Flush head White ZB2BW31
Green ZB2BW33
Flush Head Red ZB2BW34
ZB2BW3•
Amber ZB2BW35
Blue ZB2BW36
Clear ZB2BW37
Flush head for neon and LED lamps Green ZB2BW333
Red ZB2BW343
Flush Head for LED Amber ZB2BW353
ZB2BW3•• Blue ZB2BW363
Clear ZB2BW373
Extended head White ZB2BW11
Green ZB2BW13
Red ZB2BW14
Amber ZB2BW15
Extended Head
ZB2BW1• Blue ZB2BW16
Clear ZB2BW17
Extended head for neon and LED lamps Green ZB2BW133

Limited Availability
Red ZB2BW143
Amber ZB2BW153
Extended Head for LED Blue ZB2BW163
ZB2BW1••

r r e p la c e m e n t u s e o n ly. Clear ZB2BW173

Fo Silicon booted flush head

Use with mylar circular legend (ZB2BY1kkk)

e
Green
Red
ZB2BW53
ZB2BW54

Fo r
See page 333

n e w a p p li c a ti o n s , us Amber
Blue
Clear
ZB2BW55
ZB2BW56
ZB2BW57

XB4 (page 37 - 72)

Push to test Green ZB2BV031
Red ZB2BV041
Amber ZB2BV051
Blue ZB2BV061
Silicon Booted Flush Head
ZB2BW5• Clear ZB2BV071

Operating heads with black metal bezel

To order, add suffix 7 to the above references.
Example: ZB2BV071 becomes ZB2BV0717.

Light Module Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . Page 328

Specialty Light Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 330
Application Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 314
Legend Plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 333
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 331
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 332
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 334-335

324
© 1999 - 2000 Schneider Electric All Rights Reserved 11/00
 Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Illuminated Operators

Mushroom operator
Catalog
Type Color
Number
40 mm Mushroom head Green ZB2BW43
2 position momentary Red ZB2BW44
40 mm Mushroom head Amber ZB2BW45
ZB2BW••
Blue ZB2BW46
Clear ZB2BW47
40 mm Mushroom head Green ZB2BW63
2 position maintained Red ZB2BW64
Amber ZB2BW65
Blue ZB2BW66
Clear ZB2BW67

Two button with amber indicator t NEMA Type 1 only f

Catalog
Type Marked Color
Number
Two Flush Black/Red ZB2BW81254
Two Flush Green/Red ZB2BW81354
Amber Indicator I,O Black/Red ZB2BW82254
ZB2BW8••54
I,O Green/Red ZB2BW82354
START,STOP Black/Red ZB2BW87254

Limited Availability
START,STOP Green/Red ZB2BW87354
One flush, one extended Black/Red ZB2BW83254
Green/Red ZB2BW83354

o r re pla c e m e n t u s e o n ly . I,O Black/Red ZB2BW84254

F e
I,O
START,STOP
Green/Red
Black/Red
ZB2BW84354
ZB2BW88254

F o r n e w
t
f a p p li c a ti o n s , u s START,STOP
Additional color indicators available, contact local field office for details.
To upgrade to NEMA Type 3, 4, 13 order clear silicon boot ZB2BW008.
Green/Red ZB2BW88354

XB4 (page 37 - 72)

Operating heads with black metal bezel
To order, add suffix 7 to the above references.
Example: ZB2BW64 becomes ZB2BW647.

Light Module Assemblies ............................................... Page 328

Specialty Light Modules ................................................. Page 330
Application Information .................................................. Page 314
Legend Plates ................................................................ Page 333
Accessories.................................................................... Page 331
Replacement Parts ........................................................ Page 332
Dimensions ........................................................... Pages 334-335

325
11/00 © 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Illuminated Operators

Selector Switches
Catalog
Number of positions, action Color
Number
2-maintained Green ZB2BK123
Red ZB2BK124
Selector switch Amber ZB2BK125
ZB2BK1kk
Blue ZB2BK126
Clear ZB2BK127
2-spring return Green ZB2BK143
from right to left Red ZB2BK144
Amber ZB2BK145
Blue ZB2BK146
Clear ZB2BK147
3-maintained Green ZB2BK133
Red ZB2BK134
Amber ZB2BK135
Blue ZB2BK136
Clear ZB2BK137
3-spring return to Green ZB2BK153
center from right and left Red ZB2BK154
Amber ZB2BK155

Limited Availability
Blue ZB2BK156
Clear ZB2BK157
3-spring return Green ZB2BK183

o r
from right to center

re pla c e m e n t u s e o n ly . Red
Amber
ZB2BK184
ZB2BK185

F e
Blue ZB2BK186

F o r n e w a p p li
3-spring return
c a
from left to center
ti o n s , u s Clear
Green
Red
ZB2BK187
ZB2BK173
ZB2BK174

XB4 (page 37 - 72)

Amber ZB2BK175
Blue ZB2BK176
Clear ZB2BK177
Selector Switch Sequences (using contact block assemblies, page 328)
2 Position selector switch 3 Position selector switch
Contact block guide Contact block guide
O X 1 N.O. (left or right) X O O 1 N.O. (left)
X O 1 N.C. (left or right) O X O 2 NC wired in series (side-by-side)
O X 1 N.O. O O X 1 N.O. (right)
and X X O 1 N.C. (right)
X O 1 N.C. O X X 1 N.C. (left)
Note: View from front of panel X O X 2 NO wired in parallel (side-by-side)

Operating heads with black metal bezel

To order, add suffix 7 to the above references.
Example: ZB2BK123 becomes ZB2BK1237.

Light Module Assemblies...................................................... Page 328

Specialty Light Modules........................................................ Page 330
Application Information ......................................................... Page 314
Legend Plates....................................................................... Page 333
Accessories .......................................................................... Page 331
Dimensions.................................................................. Pages 334-335

326
© 1999 - 2000 Schneider Electric All Rights Reserved 11/00
 Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Illuminated Operators
40 mm Mushroom head
Push Catalog Number Catalog Number
Type Color
positiont 1N.O. - 1N.C.♦ 2N.O. - 2N.C.
M White XB2BN111 XB2BN112
M Green XB2BN311 XB2BN312
M Red XB2BN411 XB2BN412
M Amber XB2BN511 XB2BN512
M Blue XB2BN611 XB2BN612
Non-illuminated
Non-Illuminated M Clear XB2BN711 XB2BN712
M: Maintained
XB2BN••• SR White XB2BN121 XB2BN122
SR: Spring Return
SR Green XB2BN321 XB2BN322
SR Red XB2BN421 XB2BN422
SR Amber XB2BN521 XB2BN522
SR Blue XB2BN621 XB2BN622
SR Clear XB2BN721 XB2BN722
M White XB2BN1161 XB2BN1162
M Green XB2BN3161 XB2BN3162
M Red XB2BN4161 XB2BN4162
M Amber XB2BN5161 XB2BN5162
M Blue XB2BN6161 XB2BN6162
Illuminated M Clear XB2BN7161 XB2BN7162
Illuminated Direct supply SR White XB2BN1261 XB2BN1262
(Direct Supply) SR Green XB2BN3261 XB2BN3262
XB2BN••6• SR Red XB2BN4261 XB2BN4262
SR Amber XB2BN5261 XB2BN5262
SR Blue XB2BN6261 XB2BN6262
SR Clear XB2BN7261 XB2BN7262
M White XB2BN1131 XB2BN1132
M Green XB2BN3131 XB2BN3132
M Red XB2BN4131 XB2BN4132
M Amber XB2BN5131 XB2BN5132

Limited Availability
Illuminated M Blue XB2BN6131 XB2BN6132
Transformer Type M Clear XB2BN7131 XB2BN7132
110/120 V SR White XB2BN1231 XB2BN1232
(lamp included) SR Green XB2BN3231 XB2BN3232
Illuminated
(Transformer type)

re p la c e m e n t u s e o n ly .
SR
SR
Red
Amber
XB2BN4231
XB2BN5231
XB2BN4232
XB2BN5232
XB2BN••••

For e
SR
SR
Blue
Clear
XB2BN6231
XB2BN7231
XB2BN6232
XB2BN7232

For n e w a p p li c a ti o n s , u s M
M
M
M
White
Green
Red
Amber
XB2BN1141
XB2BN3141
XB2BN4141
XB2BN5141
XB2BN1142
XB2BN3142
XB2BN4142
XB2BN5142

XB4 (page 37 - 72)

Illuminated M Blue XB2BN6141 XB2BN6142
Transformer Type M Clear XB2BN7141 XB2BN7142
220/240V SR White XB2BN1241 XB2BN1242
(lamp included) SR Green XB2BN3241 XB2BN3242
SR Red XB2BN4241 XB2BN4242
SR Amber XB2BN5241 XB2BN5242
SR Blue XB2BN6241 XB2BN6242
SR Clear XB2BN7241 XB2BN7242
White W40429264001
Green W40429264003
Red W40429264004
Mushroom lens only
Amber W40429264005
Blue W40429264006
Clear W40429264007
t Position status: Position 1 - Pull. Spring return, Position 2- Center, Maintained, Position 3 - Push. Maintained or spring return.
f Contacts cannot be modified or interchanged; therefore operators are not sold separately.

1 N.O./1 N.C. 2 N.O./2 N.C.

Pos. 1 Pos. 2 Pos. 3 Pos. 1 Pos. 2 Pos. 3
Pull Center Push Pull Center Push

Application Information. . . . . . . . . . . . . . . . . . . . . . . Page 314

Legend Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 333
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 331
Replacement Parts. . . . . . . . . . . . . . . . . . . . . . . . . . Page 332
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 334-335
327
11/00 © 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Light Module Assemblies

Light module assemblies with contact block(s) N.O. N.C.

screw clamp connectorsk
Contacts Catalog
Type
N.O. N.C. Number

Direct supply (incandescent bulb included) (AC/DC)

Without contactsf - - ZB2BW060+
1 Contact block 1 - ZB2BW061+
- 1 ZB2BW062+
Direct supply 2 Contact blocks 2 - ZB2BW063+
ZB2BW06 k - 2 ZB2BW064+
1 1 ZB2BW065+

Transformer type (1.2 VA/6 V AC incandescent bulb included) (AC only)j

Without contactsf - - ZB2BW0 t0
1 Contact block 1 - ZB2BW0 t1
- 1 ZB2BW0 t2

Transformer type 2 Contact blocks 2 - ZB2BW0t3

ZB2BW03k - 2 ZB2BW0 t4
1 1 ZB2BW0 t5

Resistor type (130 V incandescent bulb included) 220-250 V supply

2 Contact blocks 1 1 ZB2BW075

Resistor type
ZB2BW075 Additional contact blocks f ■ N.O. N.C.
Contacts Catalog
Type
N.O. N.C. Number
For making up body assemblies 1 - ZB2BE101
with 3 or maximum 4 contact blocks
or replacing 1st or 2nd contact block - 1 ■ ZB2BE102

+ Complete catalog number by adding one of the following voltages: 6, 12, 24, 48 or 120 V AC/DC.
Note: If desired without bulb, omit voltage.
Additional contact block t Select proper digit for voltage desired: 1 (24 V 50/60 Hz) 2(48 V 50/60 Hz) 3 (110/120 V 50/60 Hz).
ZB2BE10 k 94 (220/240 V 60 Hz) 95 (440/480 V 60 Hz) 98 (550/600 V 60 Hz).
f Illuminated devices can be configured with a light module and 4 contacts maximum (2 decks of 2).
j Additional primary voltages available, contact local field office for details.
k Contact blocks and light module assemblies are available with quick connectors. Add suffix “3” to end of part number.
Example: ZB2BW061 becomes ZB2BW0613.
■ N.C. contact is direct opening operation conforming to EN 60 947-5-1, Section 3.

Limited Availability
o r r e p la c e m e n t u s e o n ly .
F e
F o r n e w a p p li c a ti o n s , u s
XB4 (page 37 - 72)
Illuminated Operators . . . . . . . . . . . . . . . . . . . . . . . . .Pages 324-326
Specialty Light Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 330
Application Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 314
Legend Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 333
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 331
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 332
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 334-335

328
© 1999 - 2000 Schneider Electric All Rights Reserved 11/00
 Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Specialty Contact Blocks

Specialty contact blocks N.O. N.C.

Number of Catalog
Type Description
contacts Number
1-N.O. ZB2BE1016
Low voltage / low current 1-N.C. ZB2BE1026
Gold flashed contacts Contact block without mounting base
5-24 volt 0.1-100 mA 1-N.O. ZB2BZ1016
1-N.C. ZB2BZ1026
1-N.O.
Early closing ZB2BE201
Contact block w/o mounting base
1-N.C.
Late opening ZB2BE202
1-NO (early closing) &
Overlapping block w/mounting base
Overlapping, sequencing & 1-NC (late opening) ZB2BZ106
time delay contact blocks 1-NO (early closing) &
Sequencing block w/mounting base
1-N.O. ZB2BZ107
0.1-30 sec. time delay block 1-N.O. &
w/mounting base (on delay) 1-N.C. ZB2BZ91
10-180 sec. time delay block 1-N.O. &

Limited Availability
w/mounting base (on delay) 1-N.C. ZB2BZ92
Contact blocks for ring 1-N.O. ZB2BE1019
tongue lugs with widths
smaller than 0.312” (8 mm) 1-N.C. ZB2BE1029

o r re pla c e m e n t u s e o n ly .
F e
F o r n e w a p p li c a ti o n s , u s
XB4 (page 37 - 72)

Application Information ..................................................... Page 314

Accessories ...................................................................... Page 331
Replacement Parts ........................................................... Page 332
Dimensions .............................................................. Pages 334-335

329
11/00 © 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Specialty Light Modules

Specialty Light Modules

Type Description Supply Voltage Catalog Number
Light Module with incandescent bulb
Flashing pilot light base 120 Vac ZB2BV184
included
Light Module with incandescent bulb and
Flashing illuminated push button base 120 Vac ZB2BW1845
1 N.O./1 N.C. included

Typical Wiring Diagrams

Flashing pilot light base
ZB2BV184 Off Flashing On Wiring in parallel

X1 Y1 X1 Y1 X1 Y1 X1 Y1 X1 Y1 X1 Y1

X2 Y2 X2 Y2 X2 Y2 X2 Y2 X2 Y2 X2 Y2

-X1,+X2

Type Description Supply Voltage Catalog Number

<380 V
Remote test pilot light base Single Diode ZB2BV156c
ac or dc
c When ordering, specify voltage required (6-120 V) Example: ZB2BV156120V

Typical Wiring Diagram – Single Diode

Test X1 X2
Remote test
pilot light base
ZB2BV156

Type Description Supply Voltage Catalog Number

<380 V
Remote test pilot light base Dual Diode ZB2BV68
ac or dc

Typical Wiring Diagram – Dual Diode

X1 M

Test

X2

Limited Availability
la c e m e n t u s e o n ly.
For r ep e
Illuminated Operators . . . . . . . . . . . . . . . . . . . . . . .Pages 324-326
Application Information . . . . . . . . . . . . . . . . . . . . . . . . . . Page 314

F or n e w a p p li c a ti o ns , us Legend Plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 333

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 331
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 332
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 334-335

XB4 (page 37 - 72)

330
© 1999 - 2000 Schneider Electric All Rights Reserved 11/00
 Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Accessories and Replacement Parts

XB2B Accessories
Catalog
Type Description
Number
Silicon boot for rectangular push button w/indicator light ZB2BW008
Boots
Silicon boot for rectangular push button w/o light ZB2BA008
ZB2BZ16 kk Blue ZB2BZ1601
Black ZB2BZ1602
40 mm for Momentary Mushrooms (metal)
Red ZB2BZ1604
Yellow ZB2BZ1605
Blue ZB2BZ1701
Black ZB2BZ1702
40 mm with finger cut-out for push-pull (metal)
ZB2BZ17 kk Red ZB2BZ1704
Yellow ZB2BZ1705
Guards/Locks Blue ZB2BZ1801
40 mm with finger cut-out and 7mm holes for padlocking Black ZB2BZ1802
(metal) Red ZB2BZ1804
Yellow ZB2BZ1805

ZB2BZ18 kk 60 mm mushroom guard (black plastic)

ZB2BZ19
no padlocking provision
60 mm guard for 40 mm T-T-R EMO button (yellow plastic) ZB2BZ1905
Padlock attachment
ZB2BZ6
(makes flush operator inaccessible)

Limited Availability
Black plastic ZB2SZ3
Closing plates
Gray plastic ZB2 SZ4
22 mm
Blue metallic ZB2SZ2

o r re pla c e m e n t u s e o n ly .
Adapter for mounting into 1 3/16" (30 mm) hole
and used with 30 mm P.B. nameplate
ZB2BZ41
ZB2SZ3
F Adapter for mounting into 30 mm hole and use with

e
ZB2BZ4

s
Miscellaneous

u
XB2B nameplate

F o r
accessories

n e w a p p li c a ti o n s ,
Base only-for mounting contact blocks
Add on push-on/push-off mechanism
ZB2BZ009
ZB2BZ21

XB4 (page 37 - 72)

Bulb extractor for use with BA9s XBFX13

ZB2BZ21

331
11/00 © 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Accessories and Replacement Parts

Lamps
Voltage
Type Watts Catalog Number
AC/DC
6 1.5 DL1CB006
Incandescent 12 2.0 DL1CE012
Replacement bulbs
24 2.0 DL1CE024
(Type BA9s)
48 2.4 DL1CE048
DL1CE• • •
(incandescent) 130 2.6 DL1CE130
120 - NE51HRT120V
Neon
220 - NE51HRT220V
(use with direct supply light module)
380 - NE51HRT380V

Type Color Voltage Part Number

Green 6 Vac/dc DL1CJUS0063
Red 6 Vac/dc DL1CJUS0064
Amber 6 Vac/dc DL1CJUS0065
Green 12 Vac/dc DL1CJUS0123
Red 12 Vac/dc DL1CJUS0124
LED, BA9s base for Amber 12 Vac/dc DL1CJUS0125
Direct Supply blocks Green 24 Vac/dc DL1CJUS0243
DL1CJUS• • •
(LED) Red 24 Vac/dc DL1CJUS0244
Amber 24 Vac/dc DL1CJUS0245
Green 120 Vac/dc DL1CJUS1203

Limited Availability
Red 120 Vac/dc DL1CJUS1204
Amber 120 Vac/dc DL1CJUS1205

o
LED, BA9s base for

r re pla c e m e n t u s e o n ly
retrofitting into transformer Light
. Green
Red
9 Vac only
9 Vac only
DL1CJUS0093
DL1CJUS0094

F Modules

e
Amber 9 Vac only DL1CJUS0095

F o r n e w a p p li c ti
Type o n s , u
Replacement Lenses, Boots and Keys
a s Description Catalog
Number

XB4 (page 37 - 72)

Lens - standard pilot light ZB2BV01k
Lens kit - standard pilot light
(includes lens, diffuser & gasket) ZB2BV02k
ZB2BVkkk
ZB2-BV Lens - pilot light
(jeweled for LED & Neon) ZB2BV01k3
Lens - flush illuminated push buttons ZB2BW91k
Lens - flush illuminated push buttons
Replacement lenses (Jeweled for LED & Neon) ZB2BW93k3
Lens - extended push buttons ZB2BW93k
ZB2BW93k
ZB2-BW93. Lens - extended push buttons
(jeweled for LED & Neon) ZB2BW93k3
Lens - push-to-test ZB2BV01k1
Lens - rectangle for ZB2BW80000 series
(2 button with indicator) ZB2BW90k
Lens - 40 mm mushroom W4042926400k
ZB2BP012 Replacement silicon boot for ZB2BP
ZB2 BP012 series operators ZB2BP01j
Replacement boots
Replacement neoprene boot for ZB2BP
series operators ZB2BP02j
Replacement key for standard selector switches and key
release mushroom operators. Qty. 1 - Ronis key #455 Q99900901
Key # 421 Qty. 1 Q99900911
Q99900901 Replacement keys
Key # 458A Qty. 1 Q99900910
Q99900901 Key # 520 Qty. 1 Q99900912
Key # 3131A Qty. 1 Q99900915
k Complete lens part number by replacing with digit for desired color. (1- white, 3- green, 4-red, 5- amber, 6- blue, 7-clear). Example
ZB2BV013 green standard pilot lens. Note: Jeweled lens not available in white.
j Complete boot part number by replacing with digit for desired color. (2- black, 3- green, 4- red, 5- yellow, 6- blue, 7-clear).
Example ZB2BP013 green silicon boot.

332
© 1999 - 2000 Schneider Electric All Rights Reserved 11/00
 Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Legend Plates

PVC Standard legend plates 30 x 40 mm

Texta Catalog Number Texta Catalog Number
Close ZB2BY2314 On ZB2BY2311
Down ZB2BY2308 Off On ZB2BY2367
Emergency Stop ZB2BY2330 Open ZB2BY2313
Fast ZB2BY2328 Open Close ZB2BY2376
Forward ZB2BY2305 Open-O-Close ZB2BY2388
For Rev ZB2BY2371 Out ZB2BY2339
For-O-Rev ZB2BY2384 Power On ZB2BY2326
Hand Off Auto ZB2BY2387 Raise ZB2BY2335
High ZB2BY2338 Reset ZB2BY2323
High Low ZB2BY2369 Reverse ZB2BY2306
In ZB2BY2503 Right ZB2BY2309
Inch ZB2BY2321 Run ZB2BY2334
Jog For ZB2BY2381 Slow ZB2BY2327
Jog Rev ZB2BY2380 Start ZB2BY2303
Jog Run ZB2BY2365 Stop ZB2BY2304
Left ZB2BY2310 Stop Start ZB2BY2366
Low ZB2BY2336 Up ZB2BY2307
Lower ZB2BY2337 Up Down ZB2BY2370
Man-Auto ZB2BY2372 Up-O-Down ZB2BY2389
Off ZB2BY2312
a All nameplates are black w/white lettering except “Stop”, “Emergency Stop” and “Reset” which are red w/white lettering.
For black “Reset” change final digit of catalog number to 2.
ERGEN
M
C

PVC Yellow Legend Plates 60 mm diameter PVC Yellow Legend Plates 90 mm diameter
E

Text Language Catalog Number Text Language Catalog Number

Blank N/A ZB2BY9101 Blank N/A ZB2BY8101

Limited Availability
Emergency Stop English ZB2BY9330 Emergency Stop English ZB2BY8330
ST Arret d’Urgence French ZB2BY9130 Arret d’Urgence French ZB2BY8130
OP Not Aus German ZB2BY9230 Not Aus German ZB2BY8230

r
Parada de Emergencia

p la c e m e
Arresto Emergenza

e n t u s e o n ly
Spanish
Italian
. ZB2BY9430
ZB2BY9630
Parada de Emergencia
Arresto Emergenza
Spanish
Italian
ZB2BY8430
ZB2BY8630

For
ZB2BY8330
Type Description Catalog Number

n e w a p p li c a ti o n s , u
Blank
s e Black or red background-30 mm x 40 mm ZB2BY2101

For
Blank Yellow or white background-30 mm x 40 mm ZB2BY4101
Blank Red background-45 mm x 67.5 mm ZB2BY5101
PVC blank legend (For use w/mushroom head operators)

XB4 (page 37 - 72)

Blank Oversized legend-48 mm x 48 mm XBCY22011
(For use with XB2 operators)
Blank Black or red background- 30 mm x 48 mm ZD2GY2201
(For use w/2 position joysticks)
30 x 40 mm ZB2BY2011
Silver
30 x 50 mm ZB2BY6011
30 x 40 mm ZB2BY2021
Metal legend plates Black
30 x 50 mm ZB2BY6021
30 x 40 mm ZB2BY2041
Red
30 x 50 mm ZB2BY6041
Special engravingj Black background, white letters-30 mm x 40 mm ZB2BY2002
Special engravingj Red background, white letters-30 mm x 40 mm ZB2BY2004
PVC custom engraved Special engravingj White background, black letters-30 mm x 40 mm ZB2BY4001
Special engravingj Yellow background, black letters-30 mm x 40 mm ZB2BY4005
Special engravingj Red background, white letters-45 mm x 67.5 mm ZB2BY5004
j Please specify lettering when ordering. Two lines with 11 characters (including spaces) maximum on each line.

Mylar Circular Legends

Type Description Catalog Number
No text ZB2BY1101
O ZBZBY1146
I ZBZBY1147
Mylar circular Auto ZB2BY1115
legends for use with Hand ZB2BY1316
transparent flush Off ZB2BY1312
head operators On ZB2BY1311
See page 315, 324 Start ZB2BY1303
Stop ZB2BY1304
Forward ZB2BY1305
Reverse ZB2BY1306

333
11/00 © 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm

Dimensions
ZB2BA• ZB2BA•6 ZB2BL• ZB2BH• ZB2BP•
ZB2BA•8 ZB2BW1• ZB2BW5•
ZB2BA•9
ZB2BW3•

1.14

1.18

1.14
1.14
1.14

29

30

29
29
29

.47 .67 .79 .87 .59

12 17 20 22 15

ZB2BC• ZB2BR• ZB2BS14 ZB2BS24

ZB2BT• ZB2BX•
ZB2BS54 ZB2BS64
ZB2BW4•

1.57

2.36
40
2.36

60
60
1.57
40

.94 1.25
1.26 1.34 24 32 .91 1.34
32 34 23 34

ZB2BS944 ZB2BD•••
ZB2BS844
ZB2BK1•••
1.57

1.14
40
1.57

29
40

.94 1.85 1.06

1.85 24 27
47
47

ZB2BJ••• ZB2BG• ZB2BVO• ZB2BVO•1 ZB2BVO•2

ZB2BVO•3
1.14

1.14
1.14

1.18
29

29
29

30
1.54
39

.91 .83 .55 .75 .98

1.06 19 25
23 21 14
27

ZB2 BL93•4
ZB2BD922 ZB2BA91•4

Dual Dimensions inches

1.79
42.5
1.14

mm
29

1.46 .63 1.18

37 16 .43
30 .59
11
15

ZB2BW81••• ZB2BW83••• ZB2BB•

Maximum
travel = 25mm
.98

in all directions
1.14
2.17

22

29
55

3.46
.43 1.18 .59 88
11 30 15

334
© 1999 - 2000 Schneider Electric All Rights Reserved 11/00
 Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm

Dimensions
XB2BF5••

XD2PA••

40°
centers

2.36
1.18

60
30

40°
1.14
dia.

29
3.11
79

0.47 1.77
12 45

Contact blocks and bases only

ZB2BZ10•, ZB2BZ10••,
ZB2BE10•, ZB2BE10••, ZB2BV1, ZB2BV2
ZB2BE20• ZB2BV6 ZB2BV7 ZB2BV3, ZB2BV9• ZB2 BW06•

1.57x1.18
40x30
1.57
1.57

1.57

40
40

40
1.69 0.94 0.94 2.40
1.46 1.65 2.28
43 24 24 61
37 42 58

ZB2BW184
ZB2BW1845
ZB2BW075 ZB2BW0•• ZB2BV68 ZB2BZ9•
1.57x1.18
1.57x1.18
1.57x1.18

1.87
47.5
40x30
40x30
40x30

3.54 1.73
2.60 3.23 2.32
90 44
66 82 59

MOUNTING DIMENSIONS (Minimum spacing) Standard pushbuttons 2 Position Joysticks 4 Position Joysticks
General mounting set-up and pilot lights
dia.
Operator 0.886
22.5 +0.4
-0.0
Nameplate

dia. dia.

3.35
3.35

0.886

85
Panel
85

0.886
22.5 +0.4
1.57

22.5 +0.4
40

-0.0
-0.0
Contact block
with mounting
base
1.18
30
Adder contact 1.18 3.35
block Rectangular units Rectangular units 30 85
w/o indicator w/ indicator
1.85

dia.
47

2.36

dia.
60

0.886
0.886
22.5 +0.4
-0.0 22.5 +0.4
-0.0
1.50
Dual Dimensions inches
38 1.73 mm
44

335
11/00 © 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Mounting Instructions

Mounting Instructions for ZB2B

1. The panel knockout must be 7/8" (22.3 mm) with a panel thickness of 1 to 6 mm (0.04 in to 0.23 in).
No anti-rotation notch is required.
2. Insert the operator through the knockout.
3. Bayonet lock the operator into the diecast mounting base with a 1/8 clockwise turn.
4. Orient the angled fixing screws at 12 and 6 o’clock and alternately tighten the 2 screws.
5. The fixing screws will bite into the metal of the inside panel door and provide anti-rotation and a
tamper proof installation.

+0.4
22.3 mm –0.0

1 6 mm

Limited Availability
e p la c e m e n t u s e o n ly.
For r e
For n e w a p p li c a ti o n s , us
XB4 (page 37 - 72)
336
© 1999 - 2000 Schneider Electric All Rights Reserved 11/00