Tubular Sensors - S15

S15

SENSORS
Plastic and stainless steel tubular M18 photoelectric sensors
every environment
• Short case models for cost and space savings

• Plastic and stainless steel case with IP69K protection

• All optic functions at optimal operating distances

• Models with fixed settings or adjustment trimmer

• Cable, M12 connector and pig-tail models

APPLICATIONS
-Processing and Packaging machinery
-Assembling and Conveyor lines

(*)

IP69K
(*) Stainless steel models.
ATEX II 3DG
S15
Through beam 0…20 m
Retroreflective (on R2 reflector) 0,1…5 m
Polarized retroreflective 0,1…4 m
Retroreflective for transparent (on R2 reflector) 0,1…0,8 m
short distance 0…100 mm
Diffuse proximity medium distance 0…350 mm
long distance 1 m
Fixed focus 0…50 mm
Background suppression 40…120 mm
Vdc 10…30 V
Power supply Vac
Vac/dc
PNP •
NPN •
Output NPN/PNP
relay
other
cable •
Connection connector •
pig-tail •
Approximate dimensions (mm) M18x44/48
Housing material ABS, INOX AISI 316L
Mechanical protection IP65 - IP67 - IP69K

www.datalogic.com
 S15 SERIES Output

INSTRUCTION MANUAL
Tubular Sensors - S15
Output
Output
Respon
Switch
Setting
CONTROLS TECHNICAL
TECHNICAL
DATA
DA
Power Powersupply: supply: 12…30 Indicat
12…30
Vcc
OUTPUT LED (S15…A0x/B0x/Cxx/T01/F0x/D50/M01)
Ripple:
TheRipple:
yellow LED permanently ON or OFF indicates the output status.
TECHNICAL DATA
Current
Current
consumption
consumption
The yellow LED blinking indicates the short circuit protection is turned on the Operat
Power supply (output
(output
output. current current
excluded):
12excluded):
... 30 Vdc (limit values)
Storag
Ripple S15
S15
SERIES
SERIES Outputs:
Outputs:
STABILITY LED (S15…A0x/B0x/Cxx/F0x) 2 Vpp max.
PNPPNP or NPN or NPN
indicate
open
Insulat
indicate
op
with w
c
le
ConsumptionINSTRUCTION
INSTRUCTIONMANUAL
MANUAL The
Output green
Output
current:
acceptable
LED permanently ON indicates that the signal received has an
current:
safety margin 25 mA max.
respect the output switching value and the sensor is
Insulat
OutputOutput
saturation
saturationvoltage:
voltage: Operat
ready
Response to time:
Response function LEDin660
redtime: a stable
nm (mod. operating condition.
S15…B/D/T/M) 500 us500(S15…D50)
us (S15…D50) / 1 ms / 1(Sm
Light emission Switching
Switching frequency:
frequency: 1 KHz1 KHz
(D mod.)
(D mod.)
/ 500/ Hz500(S1Hz
POWER ON IR LED
LED(S15…G0x/M01)
880 nm (mod. S15…A/C/G)
Settings:
TheSettings:
green LED ON indicates that the sensor is operating. Mono-turn
Mono-turn
distance
distance
adjustment
adjustmen trim
Setting CONTROLS
CONTROLS mono-turn trimmer (mod. S15…A01/B01/Cx1/T01/F01) and 4 turns (mod. S15…M01) Emission
Emissi po
SENSITIVITY
Indicators: TRIMMER-ADJ.
Indicators: OUTPUTOUTPUT LED LED(yello
OUTPUTOUTPUT LEDLED (S15…A0x/B0x/Cxx/T01/F0x/D50/M01)
(S15…A0x/B0x/Cxx/T01/F0x/D50/M01) Mono-turn white trimmer
wire or pin to 2 notadjust
connected:theLIGHT mode
operating distance of the sensorSTABILITY STABILIL
The yellow
The Operating
yellow
LED LED permanently
mode permanently ON or ON OFFor OFFindicates
indicates
the output
the output
status.status. (mod. S15…C/D/M)/DARK mode (mod. S15…A/B/T/F)
(S15…A01/B01/Cx1/T01/F01). Emissi
POWER POWO
The The
yellow yellow
LED LED blinking blinking
indicates
indicates
the short
the short
circuitcircuit
protection
protection
is turned
is turned
on theon the Operating
Multi-turn
Operating trimmer
temperature: to adjust
temperature: the background suppression distance of the
white wire or pin 2 connected to: 0 V DARK mode, +Vcc LIGHT mode
output.
output. sensor
Storage
Storage (S15…M01)
temperature:
temperature: Ambien
See
Insulatingthe strength:
Insulating “SETTING”
strength: paragraph
yellow OUTPUTfor LEDthe functioning mode. Vibratio
STABILITY
STABILITY LED
Indicators LED
(S15…A0x/B0x/Cxx/F0x)
(S15…A0x/B0x/Cxx/F0x) 500 Vac
500 1
Vam
The Thegreen green
LED LED permanently
permanently ON indicates
ON indicates that that
the signal
the signal
received
received
has has
an an Insulating
EMISSION
Insulating
green POWER
resistance:
resistance:
STABILITY REGULATION
LED, POWER LEDTRIMMER (S15…G01)
(mod. S15...G) >20 M Shock
>20 500
M
acceptable
acceptablesafety safety
margin marginrespectrespect
the output
the outputswitching
switching
valuevalue
and the
andsensor
the sensor
is is Operating
Mono-turn trimmer to (typical
adjust the power of the LED emitter and change the DARK/
Operating distancedistance
(typical values):
values): A0x:A0
to Output
readyready function
to functionin a stable
in a stableoperating
operating condition.
condition. operating distance andPNP theorbeam
NPN between emitter (S15…G01) and receiver
B0x:B0
(S15…F01) Housin
T01:T0 0.
POWER POWER Output
ON LED ONcurrent
LED
(S15…G0x/M01)
(S15…G0x/M01) 100 mA max.
Lens m
The green
The Saturation
green
LED LED ONvoltage
indicates
ON indicates that the
thatsensor
the sensor is operating.
is operating. WARNING: in S15…A01/B01/Cx1/T01/F01/G01 2 V max. models, the trimmer C10:rotation
C10:
0…350 0…350mm Mecha
/mm
C11: /C
SENSITIVITY
SENSITIVITY TRIMMER-ADJ.
TRIMMER-ADJ. is limited to 270° by a mechanical stop. Do not apply excessive torque when Conne
1 ms (mod. S15…A/B/C/T/M)
Mono-turn
Mono-turn trimmertrimmer to adjust
to adjust the the operating
operating distance
distanceof theof thesensorsensor adjusting (max 40 Nmm).
Response time
(S15…A01/B01/Cx1/T01/F01).
(S15…A01/B01/Cx1/T01/F01). Emission
Emission type:type: 2 ms (mod. S15…F) Weight
RED RED
(66
Multi-turn
Multi-turn
trimmertrimmer to adjust
to adjust the background
the background suppression
suppression distance
distance
of theof the INSTALLATION INFRARE
INFR
sensorsensor
(S15…M01)
(S15…M01) 500 µs (mod. S15…D)
Ambient
Ambient light light
rejection:
rejection: a
See See
the “SETTING”
the “SETTING” paragraph
paragraph for theforfunctioning
the functioning mode. mode. The sensor can be fixed by means of the M18x1 threaded body using CH.24
Vibrations:
Vibrations:
nuts (1.5Nm maximum 500 Hz (mod.tightening torque) or low-profile flared nut0.5provided
S15…A/B/C/T/M) mm
0.5 amplitude,
mm amplitude, 10 …
EMISSION
EMISSION POWER POWER REGULATION
REGULATION TRIMMER TRIMMER (S15…G01)
(S15…G01) Shock Shock
resistance:
specifically resistance:
supplied (plastic version). 11 ms 11(30S15-P
msG) (30
Switching frequency 250 Hz (mod. S15…F)
Mono-turn
Mono-turn trimmertrimmer to adjust
to adjustthe power
the power of the of LED
the LEDemitter
emitter
and and
change the the DARK/LIGHT
change DARK/LIGHT
Various selection:
orientable selection:
fixing brackets are available to ease whitesensor
white
wire or
wire
pinor2 pin
not 2connected:
positioning not connected:LIGHT L
operating
operatingdistance
distance and and the beam
the beam between between emitteremitter
(S15…G01)
(S15…G01) and and receiver (please refer to the1accessories
receiver kHz (mod. S15…D) whitewhite
wire orwire
pinor2 pi
c
listed in the general catalogue).
(S15…F01)
(S15…F01) Housing
TheHousing material:
operating material:
distance is measured from the front surface of the sensor lens. ABSABS TERLURATERL
M12 4-pole connector,
LensLens 2 m material:
material:cable Ø 4 mm, 150 mm length Ø 4 mm cable with M12 4-pole connector
Connection
(pig-tail vers.)
WARNING:
WARNING: in S15…A01/B01/Cx1/T01/F01/G01
in S15…A01/B01/Cx1/T01/F01/G01 models,
models,
the trimmer
the trimmer rotation Mechanical
rotation Mechanical
Proximity protection:
models protection:
(S15…Cxx/D50/M01):
is limited
is limited
to 270°to 270°
Dielectric by a by
strength mechanical
a mechanical stop.stop.Do not Do apply
not apply
excessive
excessive
torque whenwhen Connections:
torque theConnections:
object
500 Vac has to be
1 min., moved
between closer and
electronics or further
housing M12-4 M12-4
pole pole
connector
conne
adjusting
adjusting
(max(max40 Nmm). 40 Nmm). away from the front surface of the sensor lens 150 mm 150 cable
mm cable  4 mm4
Insulation resistence >20 MΩ 500 Vdc, between electronics and housing
to improve
Weight: detection.
Weight: 40 g 40max g max
M12 M12versionversio
/
Mechanical protection INSTALLATION INSTALLATION In case of lateral translation, IP65, IP67, IP69Kthe object must
move as indicated in the figure.
The The
sensorAmbient
can light
sensor be
canfixedrejection
be fixedby means
by means of the of M18x1
the M18x1 threaded
threaded
bodybody
usingusing
CH.24 CH.24 according to EN 60947-5-2 DIMENSIONS
DIMENSIONS
nuts nuts
(1.5Nm (1.5Nmmaximum
Vibrations maximum tightening
tighteningtorque) torque)
or low-profile
or low-profile
flaredflared
nut provided
nut provided 0.5 mmS15-PA/NA-5
amplitude, 10 … 55 Hz frequency, for each axis (EN60068-2-6)
specifically
specifically
supplied
supplied (plastic (plastic
version).
version). S15-PA/NA-5 S15-PA-2/3
S15-P
Housing material ABS TERLURAN, INOX AISI 316L (mod. CONNECTIONS
S15-PA) - (mod. S15-NA)
Various
Various
orientable
orientable fixingfixingbrackets
bracketsare available
are available to ease
to easesensorsensor
positioning
positioning
(please
(please
refer
Lensrefer
to thetoaccessories
material the accessories listedlisted
in theingeneral
the general
catalogue).
catalogue). Cable and Pig Tail plastic PMMA
The operating
The operating distance distance
is measured
is measured fromfrom the front
the front
surface
surface
of theofsensor
the sensor
lens.lens.
Operating temperature S15…A00/B00/C00/C10/F00/D50 -25 ... 55°C S15…G00
Proximity
Proximity
models models(S15…Cxx/D50/M01):
Storage temperature (S15…Cxx/D50/M01): -25 ... 70°C
the object
the objecthas has to beto moved be moved closer closer
or further
or further
awayawayfromWeight
from
the front
the front surface surface
of the of sensor
the sensor lens lens 40 g max. conn. vers., 55 g max. cable vers., 35 g max. pig-tail vers. S15-P
to improve
to improvedetection.
detection.
In case
In caseof lateral
of lateraltranslation,
translation,the object
the object mustmust
movemoveas indicated
as indicated in theinfigure.
the figure.
CONNECTIONS
CONNECTIONS
CONNECTIONS
CABLE AND PIG-TAIL M12 CONNECTOR
Cable
Cable
and and
Pig Tail
Pig Tail M12 Connector

S15…A00/B00/C00/C10/F00/D50
S15…A00/B00/C00/C10/F00/D50
ThroughS15…G00
beam emitter
S15…G00 S15…A01/B01/C11/C31/T01/F01/M01 Through beam emitter
S15…G01

S15-PA-2/3-D50
S15-PA-2/3-D50 S15-PA-3
S15-P(

* in case of white wire or pin 2 not connected the sensor operates in LIGHT mode for the
proximity models (S15…Cxx/D50/M01) and in DARK mode for the retroreflex
(S15…A0x/B0x/T01) and receiver models (S15…F0x).
M12 M12
Connector
Connector

S15…A01/B01/C11/C31/T01/F01/M01
S15…A01/B01/C11/C31/T01/F01/M01 S15…G01
S15…G01

www.datalogic.com
Tubular Sensors - S15
DIMENSIONS
PLASTIC
M12 connector version Cable version

Through beam emitter - M12 connector version Background suppression - M12 connector version

Through beam emitter - cable version Diffuse proximity - cable version

www.datalogic.com
 Emission type: RED (660 nm) (S15…B0x/T01/D50/M01) detect the transparent
pression distance of the INFRARED (880 nm) (S15…A0x/Cxx/G0x)
S15…F0x/G0x

Tubular Sensors - S15

Ambient light rejection: according to EN 60947-5-2
ode. Vibrations: 0.5 mm amplitude, 10 … 55 Hz frequency for every axis (EN60068-2-6) Place the sensors on o
Shock resistance: 11 ms (30 G) 6 shock for every axis (EN60068-2-27) In the models with se
5…G01) adjustment (S15…G01
D emitter and change the DARK/LIGHT selection: white wire or pin 2 not connected: LIGHT mode (S15…Cxx/D50/M01) / DARK mode (S15…A0x/B0x/T01/F0x);
white wire or pin 2 connected to: 0V DARK mode, +Vcc LIGHT mode
Moving the emitter (S
(S15…G01) and receiver points of switch-off an
Housing material: ABS TERLURAN (S15-PA) / INOX AISI 316L (S15-NA)
(S15…F0x).
Lens material: PMMA Mount the sensor in th
odels, the trimmer rotation Mechanical protection: IP65, IP67, IP69K LED (STABILITY) on th
ply excessive torque when Connections: M12-4 pole connector (S15-PA/NA-5) / 2 m  4 mm cable (S15-PA-2)
STAINLESS STEEL 150 mm cable  4 mm with M12-4 pole connector - pig-tail (S15-PA-3) S15…D50
Weight: 40 g max M12 version / 55 g max cable version / 35 g max pig-tail version Place the sensor in ax
the operating distance
M12 connector version Through beam emitter - M12 connector version
DIMENSIONS
readed body using CH.24
S15…M01
profile flared nut provided
S15-PA/NA-5 S15-PA-2/3 Place the object to b
distance than desired
ease sensor positioning
trimmer to the maximu
catalogue).
(OUT) is ON, then tu
urface of the sensor lens.
switch OFF. Verify the
sensor; tune the adjust

TE
The TEST+ and TEST
verify that the system
when the test is act
activating voltage rang
The emission is switch

S15…G00

The sensors are NOT saf

S15-PA-2/3-D50 S15-PA-3 (pig-tail)

Background suppression - M12 connector version Pig-tail version DECLARATION OF CONFOR

We Datalogic Automation dec
2004/108/CE and successive
WARRANTY
Datalogic Automation warrants
Datalogic Automation will repa
warranty period of 36 months
This warranty does not cover
Automation products.
S15…G01 DATALOGIC AUTOMATION
Via Lavino 265 - 40050 Monte
Tel: +39 051 6765611 - Fax: +
www.automation.datalogic.com

DATALOGIC AUTOMATION
DATALOGIC AUTOMATION

© 2009 –2013 Datalogic Automa

international laws. • Copying, o
Datalogic Automation. Datalogic
countries, including the U.S.A. an
perates in LIGHT mode for the
K mode for the retroreflex dimensions in mm

INDICATORS AND SETTINGS

Plastic/metal case with trimmer, M12 connector

Stability LED Output LED Power ON LED

G01
A01, B01, C11, C31, T01, F01, M01

Plastic, no trimmer, Cable, Pig Tail

Power ON LED
Output LED
Stability LED Output LED

A00, B00, C10, C00, T01, D50 G00 F00

www.datalogic.com
Tubular Sensors - S15
DETECTION DIAGRAMS
cm R2 R5
cm R2 R5 Grey 18% White 90%

m cm
m

A00 - RETROREFLECTIVE B00 - POLARIZED RETROREFLECTIVE C00 - SHORT DIFFUSE PROXIMITY

cm White 90% mm
mm Grey 18%
Grey 18%
White 90%

cm mm
cm

C10/C11 - MEDIUM DIFFUSE PROXIMITY C31 - LONG DIFFUSE PROXIMITY D50 - FIXED FOCUS PROXIMITY

cm R5
cm R2 Diff. B/W

m
m

Diff. W/G

M01 - BACKGROUND SUPPRESSION

F00/G01 - THROUGH BEAM T01 - RETROREFLECTIVE BY TRASPARENT
Difference White/Grey and Black/White

www.datalogic.com
Tubular Sensors - S15
MODEL SELECTION AND ORDER INFORMATION
OPTIC FUNCTION HOUSING CONNECTION OUTPUT MODEL ORDER No.
NPN S15-PA-2-A00-NK 952301051
2 m cable
PNP S15-PA-2-A00-PK 952301001
NPN S15-PA-5-A01-NK 952301300
Plastic M12 connector
PNP S15-PA-5-A01-PK 952301220
Retroreflective
NPN S15-PA-3-A00-NK 952301161
pig-tail
PNP S15-PA-3-A00-PK 952301111
NPN S15-NA-5-A01-NK 952301450
Stainless Steel M12 connector
PNP S15-NA-5-A01-PK 952301370
NPN S15-PA-2-B00-NK 952301061
2 m cable
PNP S15-PA-2-B00-PK 952301011
NPN S15-PA-5-B01-NK 952301310
Plastic M12 connector
PNP S15-PA-5-B01-PK 952301230
Polarized Retroreflective
NPN S15-PA-3-B00-NK 952301171
pig-tail
PNP S15-PA-3-B00-PK 952301121
NPN S15-NA-5-B01-NK 952301460
Stainless Steel M12 connector
PNP S15-NA-5-B01-PK 952301380
NPN S15-PA-2-C00-NK 952301071
2 m cable
Diffuse proximity PNP S15-PA-2-C00-PK 952301021
Plastic
(short distance) NPN S15-PA-3-C00-NK 952301181
pig-tail
PNP S15-PA-3-C00-PK 952301131
NPN S15-PA-2-C10-NK 952301081
2 m cable
PNP S15-PA-2-C10-PK 952301031
NPN S15-PA-5-C11-NK 952301330
Plastic M12 connector
Diffuse proximity PNP S15-PA-5-C11-PK 952301250
(medium distance) NPN S15-PA-3-C10-NK 952301191
pig-tail
PNP S15-PA-3-C10-PK 952301141
NPN S15-NA-5-C11-NK 952301480
Stainless Steel M12 connector
PNP S15-NA-5-C11-PK 952301400
NPN S15-PA-5-C31-NK 952301340
Plastic
Diffuse proximity PNP S15-PA-5-C31-PK 952301260
M12 connector
(long distance) NPN S15-NA-5-C31-NK 952301490
Stainless Steel
PNP S15-NA-5-C31-PK 952301410
NPN S15-PA-2-D50-NK 952301530
2 m cable
PNP S15-PA-2-D50-PK 952301520
Fixed focus Plastic
NPN S15-PA-3-D50-NK 952301550
pig-tail
PNP S15-PA-3-D50-PK 952301540
NPN S15-PA-2-F00-NK 952301091
2 m cable
PNP S15-PA-2-F00-PK 952301041
NPN S15-PA-5-F01-NK 952301360
Plastic M12 connector
PNP S15-PA-5-F01-PK 952301280
Through beam receiver
NPN S15-PA-3-F00-NK 952301201
pig-tail
PNP S15-PA-3-F00-PK 952301151
NPN S15-NA-5-F01-NK 952301510
Stainless Steel M12 connector
PNP S15-NA-5-F01-PK 952301430
2 m cable - S15-PA-2-G00-XG 952301101
Plastic M12 connector - S15-PA-5-G01-XG 952301290
Through beam emitter
pig-tail - S15-PA-3-G00-XG 952301211
Stainless Steel M12 connector - S15-NA-5-G01-XG 952301440
NPN S15-PA-5-M01-NK 952301350
Plastic
PNP S15-PA-5-M01-PK 952301270
Background suppression M12 connector
NPN S15-NA-5-M01-NK 952301500
Stainless Steel
PNP S15-NA-5-M01-PK 952301420
NPN S15-PA-5-T01-NK 952301320
Plastic
PNP S15-PA-5-T01-PK 952301240
Transparent M12 connector
NPN S15-NA-5-T01-NK 952301470
Stainless Steel
PNP S15-NA-5-T01-PK 952301390

www.datalogic.com
Tubular Sensors - S15
ACCESSORIES

ST-5010 ST-5011 ST-5012

ST-5017 SWING-18 PLASTIC NUT

M18x1

40°

4
�27.5

SP-40

mm

www.datalogic.com
Tubular Sensors - S15
MODEL DESCRIPTION ORDER No.
ST-5010 M18/14 mounting bracket 95ACC5230
ST-5011 M18 mounting bracket short 95ACC5240
ST-5012 M18 mounting bracket long 95ACC5250
ST-5017 M18 mounting bracket 95ACC5270
ST1218 M12/M18 mounting brackets 95ACC3340
ST1830 M18/M30 mounting brackets 95ACC3350
SP-40 mounting bracket tubular 95ACC1370
SWING-18 Adjustable support for M18 tubular sensors 895000006
PLASTIC NUT flared mounting nut 95ACC2630

CABLES

TYPE DESCRIPTION LENGTH MODEL ORDER No.

3m CS-A1-02-G-03 95A251380
5m CS-A1-02-G-05 95A251270
4-pole, grey, P.V.C.
7m CS-A1-02-G-07 95A251280
Axial M12 Connector
10 m CS-A1-02-G-10 95A251390
2m CS-A1-02-R-02 95A251540
4-pole, P.U.R.
5m CS-A1-02-R-05 95A251560
3m CS-A2-02-G-03 95A251360
5m CS-A2-02-G-05 95A251240
4-pole, grey, P.V.C.
7m CS-A2-02-G-07 95A251245
Radial M12 Connector
10 m CS-A2-02-G-10 95A251260
2m CS-A2-02-R-02 95A251550
4-pole, P.U.R.
5m CS-A2-02-R-05 95A251570
3m CV-A1-22-B-03 95ACC1480
5m CV-A1-22-B-05 95ACC1490
Axial M12 Connector 10 m CV-A1-22-B-10 95ACC1500
15 m CV-A1-22-B-15 95ACC2070
4-pole, shielded, black, P.V.C.
25 m CV-A1-22-B-25 95ACC2090
3m CV-A2-22-B-03 95ACC1540
Radial M12 Connector 5m CV-A2-22-B-05 95ACC1550
10 m CV-A2-22-B-10 95ACC1560
3m CS-A1-02-U-03 95ASE1120
5m CS-A1-02-U-05 95ASE1130
4-pole, U.L., black, P.V.C. 10 m CS-A1-02-U-10 95ASE1140
Axial M12 Connector
15 m CS-A1-02-U-15 95ASE1150
25 m CS-A1-02-U-25 95ASE1160
Connector- not cabled CS-A1-02-B-NC G5085002
4-pole, black
Radial M12 Connector Connector- not cabled CS-A2-02-B-NC G5085003

Rev. 01, 07/2016

www.datalogic.com