MAKING MODERN LIVING POSSIBLE

Technical Information

Orbital Motors
OMSW with brake nose

powersolutions.danfoss.com
Technical Information OMSW with brake nose Orbital Motors

Revision history Table of revisions

Date Changed Rev

October 2014 Changed to Danfoss layout DA

November 2012 CD

2 520L0472 • Rev DA • October 2014

Technical Information OMSW with brake nose Orbital Motors

Contents
A wide range of Orbital Motors
Characteristic, features and application areas of Orbital Motors....................................................................................4
Characteristic features of Danfoss Orbital Motors................................................................................................................4
Technical features of Danfoss Orbital Motor..........................................................................................................................4
Survey of literature with technical data on Danfoss Orbital Motors..............................................................................5
Data survey
Speed, torque and output.............................................................................................................................................................6
Versions
OMSW version................................................................................................................................................................................... 7
Features available (options)..........................................................................................................................................................7
Code numbers
Ordering...............................................................................................................................................................................................8
Technical data
Technical data for OMSW.............................................................................................................................................................. 9
Max. permissible shaft seal pressure.......................................................................................................................................10
OMSW with check valves ...................................................................................................................................................... 10
OMSW with drain connection.............................................................................................................................................. 10
Pressure drop in motor................................................................................................................................................................ 11
Oil flow in drain line...................................................................................................................................................................... 11
Direction of shaft rotation...........................................................................................................................................................11
Permissible shaft load for OMSW............................................................................................................................................. 12
Permissible radial shaft load.................................................................................................................................................12
Function diagrams.........................................................................................................................................................................13
Shaft version.................................................................................................................................................................................... 17
Port thread versions......................................................................................................................................................................17
Dimensions
OMSW with side port and check valve...................................................................................................................................18
OMSW with side port and drain connection........................................................................................................................20
OMSW with end port and check valve................................................................................................................................... 22
OMSW with end port and drain connection........................................................................................................................ 24
Weight of motors

520L0472 • Rev DA • October 2014 3

Technical Information OMSW with brake nose Orbital Motors

A wide range of Orbital Motors

Characteristic, features and application areas of Orbital Motors

Danfoss is a world leader within production of low speed orbital motors with high torque. We can offer
more than 3,000 different orbital motors, categorised in types, variants and sizes (including different shaft
versions).
The motors vary in size (rated displacement) from 8 cm³ [0.50 in³] to 800 cm³ [48.9 in³] per revolution.
Speeds range up to approximate 2,500 min-1 (rpm) for the smallest type and up to approximate 600 min-1
(rpm) for the largest type.
Maximum operating torques vary from 13 N•m [115 lbf•in] to 2,700 N•m [24,000 lbf•in] (peak) and
maximum outputs are from 2.0 kW [2.7 hp] to 70 kW [95 hp].

Characteristic features of Danfoss Orbital Motors

• Smooth running over the entire speed range
• Constant operating torque over a wide speed range
• High starting torque
• High return pressure without the use of drain line (High pressure shaft seal)
• High efficiency
• Long life under extreme operating conditions
• Robust and compact design
• High radial and axial bearing capacity
• For applications in both open and closed loop hydraulic systems
• Suitable for a wide variety of hydraulics fluids

Technical features of Danfoss Orbital Motor

The programme is characterised by technical features appealing to a large number of applications and a
part of the programme is characterised by motors that can be adapted to a given application. Adaptions
comprise the following variants among others:

4 520L0472 • Rev DA • October 2014

Technical Information OMSW with brake nose Orbital Motors

A wide range of Orbital Motors

• Motors with corrosion resistant parts
• Wheel motors with recessed mounting flange
• OMP, OMR- motors with needle bearing
• OMR motor in low leakage version
• OMR motors in a super low leakage version
• Short motors without bearings
• Ultra short motors
• Motors with integrated positive holding brake
• Motors with integrated negative holding brake
• Motors with integrated flushing valve
• Motors with speed sensor
• Motors with tacho connection
• All motors are available with black finish paint

Survey of literature with technical data on Danfoss Orbital Motors

Detailed data on all Danfoss Orbital Motors can be found in our motor catalogue, which is divided into
more individual subcatalogues:
• General information on Danfoss Orbital Motors: function, use, selection of orbital motor, hydraulic
systems, etc.
• Technical data on small motors: OML and OMM
• Technical data on medium sized motors: OMP, OMR, OMH
• Technical data on medium sized motors: DH and DS
• Technical data on medium sized motors: OMEW
• Technical data on medium sized motors: VMP
• Technical data on medium sized motors: VMR
• Technical data on large motors: OMS, OMT and OMV
• Technical data on large motors: TMT
• Technical data on large motors: TMV

A general survey brochure on Danfoss Orbital Motors gives a quick motor reference based on power,
torque, speed and capabilities.

520L0472 • Rev DA • October 2014 5

Technical Information OMSW with brake nose Orbital Motors

Data survey

Speed, torque and output

Max. speed / Max. torque / Max. output
min-1
(rpm)
800
600
400
200

125 160 200 250 315 400 500

lbf•in Nm
1200
10000
1000
8000
800
6000
600

4000
400

2000 200

125 160 200 250 315 400 500

hp kW
20 30
20
10
10

125 160 200 250 315 400 500

OMSW

151-2005.11

[light] Intermittent values

[dark] Continuous values
The bar diagrams above are useful for a quick selection of relevant motor size for the application. The
final motor size can be determined by using the function diagram for each motor size.
• OMSW can be found here: Function diagrams on page 13.
The function diagrams are based on actual tests on a representative number of motors from our
production. The diagrams apply to a return pressure between 5 and 10 bar [75 and 150 psi] when using
mineral based hydraulic oil with a viscosity of 35 mm2/s [165 SUS] and a temperature of 50°C [120°F]. For
further explanation concerning how to read and use the function diagrams, please consult the paragraph
"Selection of motor size" in the technical information "General" 520L0232.

6 520L0472 • Rev DA • October 2014

Technical Information OMSW with brake nose Orbital Motors

Versions

OMSW version

Mounting Spigot Bolt circle Shaft Port size Euro US Side End Stan Drain Check Main
flange diameter diameter pean versi port port dard conn valve type
(front/rear (BC) versi on versi versi shaft ectio designat
end) on on on seal n ion
Wheel Ø5.0 in / Ø5.0 Ø 5.8 in Tap. 1 1/4" 7/8 - 14 UNF X X X No Yes OMSW
in
X X X Yes No OMEW
X X X No Yes OMSW
X X X Yes No OMSW

Motors are painted black

Features available (options)

Shaft options:
• 1 3/8” shaft
• Side port G 1/2
• End port G 1/2
High pressure shaft seal

520L0472 • Rev DA • October 2014 7

Technical Information OMSW with brake nose Orbital Motors

Code numbers

OMSW code numbers

Displacement

Code Numbers 125 160 200 250 315 400 500

151F 2502 2503 2504 2505 2506 2507 2508
151F 2512 2513 2514 2515 2516 2517 2518
151F 2522 2523 2524 2525 2526 2527 2528
151F 2532 2533 2534 2535 2536 2537 2538

Ordering
Add the four digit prefix “151F” to the four digit numbers from the chart for complete code number.
Example:
151F2514 for an OMSW 200 as sideport version and with drain connection

Orders will not be accepted without the four digit prefix.

8 520L0472 • Rev DA • October 2014

Technical Information OMSW with brake nose Orbital Motors

Technical data

Technical data for OMSW

Type OMSW OMSW OMSW OMSW OMSW OMSW OMSW

Motor size 125 160 200 250 315 400 500

Geometric displacement cm3 125.7 159.7 200.0 250.0 314.9 393.0 488.0
[in3] [7.67] [9.75] [12.20] [15.26] [19.22] [23.98] [29.78]
Maximum speed min-1 cont. 600 470 375 300 240 190 155
[rpm]
int.1) 720 560 450 360 285 230 185
Maximum torque N•m cont. 375 490 610 720 825 865 850
[lbf•in] [3320] [4340] [5400] [6370] [7300] [7660] [7520]
int.1) 490 600 720 870 1000 990 990
[4340] [5310] [6370] [7700] [8850] [8760] [8760]
Maximum output kW cont. 18.0 16.5 16.5 14.5 15.0 11.0 9.0
[hp] [24.1] [22.1] [22.1] [19.4] [20.1] [14.8] [12.1]
int.1) 22.5 22.5 23.0 18.0 17.0 12.5 10.5
[30.2] [30.2] [30.8] [24.1] [22.8] [16.8] [14.1]
Maximum pressure drop bar cont. 210 210 210 200 200 160 120
[psi] [3050] [3050] [3050] [2900] [2900] [2320] [1740]
int.1) 275 260 250 250 240 190 140
[3990] [3770] [3630] [3630] [3480] [2760] [2030]
Peak2) 295 280 270 270 260 210 160
[4280] [4060] [3920] [3920] [3770] [3050] [2320]
Maximum oil flow l/min cont. 75 75 75 75 75 75 75
[US gal/min] [19.8] [19.8] [19.8] [19.8] [19.8] [19.8] [19.8]
int.1) 90 90 90 90 90 90 90
[23.8] [23.8] [23.8] [23.8] [23.8] [23.8] [23.8]
Maximum starting pressure bar 10 8 8 8 8 8 8
with unloaded shaft [psi] [145] [115] [115] [115] [115] [115] [115]
Minimum starting torque at maximum press drop cont. 290 370 470 560 710 710 660
N•m [lbf•in] [2570] [3270] [4160] [4960] [6280] [6280] [5840]
at maximum press drop int.1) 380 460 560 700 850 840 770
N•m [lbf•in] [3360] [4070] [4960] [6200] [7520] [7430] [6820]
1) Intermittent operation: the permissible values may occur for max. 10% of every minute.

2) Peak load: the permissible values may occur for maximum 1% of every minute.

Type Max inlet pressure Max return pressure with drain line
OMSW bar cont. 230 140
[psi] [3340] [2030]
bar int.1) 290 175
[psi] [4280] [2540]
bar peak2) 300 210
[psi] [4350] [3050]
1) Intermittent operation: the permissible values may occur for max. 10% of every minute.

2) Peak load: the permissible values may occur for max. 1% of every minute.

For max. permissible combination of flow and pressure, see function diagram for actual motor.

520L0472 • Rev DA • October 2014 9

Technical Information OMSW with brake nose Orbital Motors

Technical data
Max. permissible shaft seal pressure

OMSW with check valves

The pressure on the shaft seal never exceeds pressure in the return line

151-1316.10

OMSW with drain connection

Use of the drain connection:
The shaft seal pressure equals the pressure in the drain line.
Without use of the drain connection:
The shaft seal pressure equals the average of input pressure and return pressure.

151-1855.10

Max. pressure on shaft seal

P P
psi bar
1500
100
90
1200
80
70
900
60
50
600 40
30
300 20
10
0 0
0 100 200 300 400 500 600 700 800 max. min-1
(rpm)

151-1674.10

[dotted line] Intermittent operation: the permissible values may occur for max. 10% of every minute
[solid line] Continuous operation

10 520L0472 • Rev DA • October 2014

Technical Information OMSW with brake nose Orbital Motors

Technical data
Pressure drop in motor
∆p ∆p
psi bar
16

200 14

12
150 10

8
100
6

4
50
2

0 0 Q
0 10 20 30 40 50 60 70 80 90 l/min

Q
0 2 4 6 8 10 12 14 16 18 20 22 US gal/min

151-1408.10

The curve applies to an unloaded motor shaft and an oil viscosity of 35 mm2/s [165 SUS]

Oil flow in drain line

The table below shows the max. oil flow in the drain line at a return pressure less than 5-10 bar [75-150
psi].
Pressure Viscosity Oil flow in drop drain line bar mm2/s l/min [psi] [SUS] [US gal/min]

Pressure drop bar [psi] Viscosity mm2/s [SUS] Oil flow in drain line l/min [US gal/
min]
140 [2030] 20 [100] 1.5 [0.40]
35 [165] 1.0 [0.26]
210 [3050] 20 [100] 3.0 [0.79]
35 [165] 2.0 [0.53]

Direction of shaft rotation

X-X X-X
B A B A

B A B A X X X X

151-2010.11 151-2011.11

520L0472 • Rev DA • October 2014 11

Technical Information OMSW with brake nose Orbital Motors

Technical data
Permissible shaft load for OMSW
Mounting flange: Wheel / Shaft: All shaft types

Permissible radial shaft load

The output shaft runs in tapered roller bearings that permit high axial and radial forses.
The permissible radial load on the shaft is shown for an axial load of 0 N as a function of the distance from
the mounting flange to the point of load application.
The curve is based on B10 Bearing life (2000 hours or 12 000 000 shaft revolutions at 100 min-1) at rated
output torque, when mineral-based hydraulic oil with a sufficient content of anti-wear additives, is used.

12 520L0472 • Rev DA • October 2014

Technical Information OMSW with brake nose Orbital Motors

Technical data
Function diagrams

OMS 125

Q=5 l/min
[1.3 US gal/min]
10 l/min
[2.6 US gal/min]

20 l/min
[5.3 US gal/min]

30 l/min
[7.9 US gal/min]

40 l/min
[10.6 US gal/min]

50 l/min
[13.2 US gal/min]

75 l/min
[19.8 US gal/min]

Q=90 l/min
[23.8 US gal/min]
60 l/min
[15.9 US gal/min]
lbf• in Nm

4500 500 ∆ p=275 bar

3990 psi
4000 450
N=21kW 250 bar
3630 psi
3500 400
21hp 18kW 225 bar
15kW 3260 psi
350 12kW
3000 210 bar
9kW 3050 psi
300 12hp 15hp 18hp 175 bar
2500 6kW 2540 psi
250
2000
6hp 9hp η t =85% 140 bar
2030 psi
200 83%
1500 3hp 3kW 105 bar
150 1520 psi
80%
1000 100 70 bar
75% 1020 psi
1hp N=1kW 70%
500 50
η t =60% ∆ p= 35 bar
510 psi
0 0

0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 min-1
(rpm)

151-903.10

OMS 160
lbf• in Nm
Q=5 l/min
[1.3 US gal/min]
10 l/min
[2.6 US gal/min]

20 l/min
[5.3 US gal/min]

30 l/min
[7.9 US gal/min]

40 l/min
[10.6 US gal/min]

50 l/min
[13.2 US gal/min]

60 l/min
[15.9 US gal/min]

75 l/min
[19.8 US gal/min]

Q=90 l/min
[23.8 US gal/min]
6000

600 ∆ p=260 bar

5000 3770 psi
550
18hp 18kW N=21kW
225 bar
500 3260 psi
12kW 15kW 210 bar
4000 450 3050 psi
6hp 6kW 9kW
15hp
400 175 bar
21hp 2540 psi
350 12hp 160 bar
3000 9hp
2320 psi
300 140 bar
2030 psi
250
2000 3hp 105 bar
3kW
200 1520 psi
η t =87%
150
N=1kW 86% 85% 83% 70 bar
1000 80% 1020 psi
100 1hp 75%
70%
50
η t =60% ∆ p= 35 bar
510 psi
0 0

0 50 100 150 200 250 300 350 400 450 500 550 600 min-1
(rpm)

151-904.11

Explanation of function diagram use, basis and conditions can be found on page 5.
[blue] Continuous range
[pink] Intermittent range (max. 10% operation every minute)

Intermittent pressure drop and oil flow must not occur simultaneously.

520L0472 • Rev DA • October 2014 13

Technical Information OMSW with brake nose Orbital Motors

Technical data

OMS 200

Q=5 l/min
[1.3 US gal/min]
10 l/min
[2.6 US gal/min]

20 l/min
[5.3 US gal/min]

30 l/min
[7.9 US gal/min]

40 l/min
[10.6 US gal/min]

50 l/min
[13.2 US gal/min]

75 l/min
[19.8 US gal/min]

Q=90 l/min
[23.8 US gal/min]
60 l/min
[15.9 US gal/min]
lbf• in Nm

7000
750

6000
700 ∆ p=250 bar
650 3630 psi
15hp 225 bar
N=21kW
600 3260 psi
9kW 15kW 18kW
5000 12kW 210 bar
550 12hp
6kW 3050 psi
500 175 bar
18hp 21hp 2540 psi
4000 450
6hp 160 bar
400 2320 psi
9hp 140 bar
3000 350 2030 psi
300
η t =88% 105 bar
250 86% 1520 psi
2000 3kW 85%
200
N=1kW 3hp 83% 80% 70 bar
150 1020 psi
1000 1hp 75%
100 70%
η t =60% ∆ p= 30 bar
50 440 psi
0 0

0 50 100 150 200 250 300 350 400 450 500 min-1
(rpm)

151-905.10

OMS 250
Q=5 l/min
[1.3 US gal/min]
10 l/min
[2.6 US gal/min]

20 l/min
[5.3 US gal/min]

30 l/min
[7.9 US gal/min]

40 l/min
[10.6 US gal/min]

50 l/min
[13.2 US gal/min]

75 l/min
[19.8 US gal/min]

Q=90 l/min
[23.8 US gal/min]
60 l/min
[15.9 US gal/min]

lbf• in Nm

8000 900 ∆ p=250 bar

3630 psi

7000 800 225 bar

3260 psi
15kW 18kW N=21kW
700 12kW 200 bar
6000 9kW 2900 psi
175 bar
600 6kW 15hp 2540 psi
5000 18hp 21hp
155 bar
500 2250 psi
9hp 12hp
4000 140 bar
6hp 2030 psi
400
125 bar
3000 1810 psi
300 3hp 3kW 86% 85%
83% 95 bar
80% 1390 psi
2000 75%
200
N=1kW η t =87% 70 bar
70% 1020 psi
1hp
1000 100
η t =60% ∆ p= 35 bar
510 psi
0 0

0 50 100 150 200 250 300 350 400 min-1

(rpm)

151-1039.10

Explanation of function diagram use, basis and conditions can be found on page 5.
[blue] Continuous range
[pink] Intermittent range (max. 10% operation every minute)

Intermittent pressure drop and oil flow must not occur simultaneously.

14 520L0472 • Rev DA • October 2014

Technical Information OMSW with brake nose Orbital Motors

Technical data

OMS 400

Q=5 l/min
[1.3 US gal/min]
10 l/min
[2.6 US gal/min]

20 l/min
[5.3 US gal/min]

30 l/min
[7.9 US gal/min]

40 l/min
[10.6 US gal/min]

50 l/min
[13.2 US gal/min]

75 l/min
[19.8 US gal/min]

Q=90 l/min
[23.8 US gal/min]
60 l/min
[15.9 US gal/min]
lbf• in Nm

10000
1100 ∆ p=190 bar
2760 psi
9000 175 bar
1000
N=15kW 2540 psi
8000 900
160 bar
2320 psi
7000 800
12kW 140 bar
2030 psi
6000 700
6kW 9kW 15hp 120 bar
600 1740 psi
5000 9hp
3kW 12hp 105 bar
500 6hp 1520 psi
4000
400
3hp
η t =87% 80 bar
3000 1160 psi
300 N= 85% 60 bar
86%
2000 1kW 83% 870 psi
200 1hp 80%
1000 100
75%
70%
∆ p= 30 bar
η t =60% 440 psi
0 0

0 25 50 75 100 125 150 175 200 225 250 min-1

(rpm)

151-1491.10

OMS 315
Q=5 l/min
[1.3 US gal/min]
10 l/min
[2.6 US gal/min]

20 l/min
[5.3 US gal/min]

30 l/min
[7.9 US gal/min]

40 l/min
[10.6 US gal/min]

50 l/min
[13.2 US gal/min]

75 l/min
[19.8 US gal/min]

Q=90 l/min
[23.8 US gal/min]
60 l/min
lbf• in Nm [15.9 US gal/min]

10000
1100 ∆ p=240 bar
3480 psi
9000
1000 225 bar
3260 psi
8000 900
N=18kW 200 bar
2900 psi
7000 800 175 bar
15kW 2540 psi
6000 700 9kW 160 bar
12kW 18hp 2320 psi
600 15hp 140 bar
5000 12hp 2030 psi
500 6kW 9hp 120 bar
4000 1740 psi
400 6hp 100 bar
3kW 1450 psi
3000 η t =87% 80%
300
3hp 70 bar
N=1kW 85% 75% 1020 psi
2000
200 1hp 83% 70%
1000 100 η t =60% ∆ p= 35 bar
510 psi
0 0

0 25 50 75 100 125 150 175 200 225 250 275 300 min-1
(rpm)

151-906.10

Explanation of function diagram use, basis and conditions can be found on page 5.
[blue] Continuous range
[pink] Intermittent range (max. 10% operation every minute)

Intermittent pressure drop and oil flow must not occur simultaneously.

520L0472 • Rev DA • October 2014 15

Technical Information OMSW with brake nose Orbital Motors

Technical data

OMS 500

Q=5 l/min
[1.3 US gal/min]
10 l/min
[2.6 US gal/min]

20 l/min
[5.3 US gal/min]

30 l/min
[7.9 US gal/min]

40 l/min
[10.6 US gal/min]

50 l/min
[13.2 US gal/min]

75 l/min
[19.8 US gal/min]

Q=90 l/min
[23.8 US gal/min]
60 l/min
[15.9 US gal/min]
lbf• in Nm

10000
1100
9000
1000

8000 900 N=12kW ∆ p=140 bar

9kW 2030 psi
6hp 6kW
7000 800
12hp 120 bar
1740 psi
6000 700
105 bar
600 3kW η t =88% 86% 85% 1520 psi
5000 9hp
90 bar
500 83% 1300 psi
4000 3hp
80 bar
400 80% 1160 psi
3000
300 N=
1kW 75%
2000 1hp 70% 50 bar
200 730 psi
η t =60%
1000 100 ∆ p= 25 bar
360 psi
0 0

0 25 50 75 100 125 150 175 200 min-1

(rpm)

151-1984.10

Explanation of function diagram use, basis and conditions can be found on page 5.
[blue] Continuous range
[pink] Intermittent range (max. 10% operation every minute)

Intermittent pressure drop and oil flow must not occur simultaneously.

16 520L0472 • Rev DA • October 2014

Technical Information OMSW with brake nose Orbital Motors

Technical data
Shaft version

A: Tapered 1 1/4 in shaft

N: Cone 1:8 SAE J501

M: 1 - 20 UNEF across flats 1 7/16 in Tightening torque: 200 ± 10 Nm [1770 ± 85 lbf-in]

O: Parallel key 5/16 x 5/16 x 1 1/4 SAE

Port thread versions

A: UNF main port

C: 7/8 - 14 UNF o-ring boss port

B: UNF drain port 7/16 - 20 UNF o-ring boss port

520L0472 • Rev DA • October 2014 17

Technical Information OMSW with brake nose Orbital Motors

Dimensions

OMSW with side port and check valve

OMSW with side port and check valve
Ø127.5 [5.000]
Ø126.9 [4.996]
Ø124 [4.88]
Ø94 [3.70]
Ø58.85 [2.317]
Ø58.80 [2.315]
54.3 [2.138]
53.7 [2.114]

2.3 [0.091]
1.7 [0.067]
119.1 [4.69]

R5 [0.18]
140.10 [5.516]
138.25 [5.443]

8 [0.31]

80 [3.15]
43 [3.69]
4 [0.16]

21 [0.83]
L1
L2
L3
22 [0.87]

16 [0.63] 16 [0.63] max. 56 [2.20] max. 51 [2.01]

70 [2.76] R18 [0.71] Ø127.0 [5.000]
Ø126.9 [4.999]
max. 103 [4.06]
Ø13.5 [0.531] E R20 [0.79]
max. 133.25 [5.246]

12]
[5.8
Ø76.2 [3.000]

Not Painted 7.62

Ø14
Please note:
The stated dimension
is without paint.

max. 133.25 [5.246]

151-1999.13

D: 7/8 - 14 UNF; 16.76 mm [0. 66 in] deep

E: Thread for external brake 4 x 5/16 - 18 UNF; 13 mm [0.51 in] deep

18 520L0472 • Rev DA • October 2014

Technical Information OMSW with brake nose Orbital Motors

Dimensions

Type L1 mm [in] L2 mm [in] L3 mm [in]

OMSW 125 21.8 [0.86] 58.8 [2.31] 100.2 [3.94]
OMSW 160 27.8 [1.09] 64.8 [2.55] 106.2 [4.18]
OMSW 200 34.8 [1.37] 71.8 [2.83] 113.2 [4.46]
OMSW 250 43.5 [1.71] 80.5 [3.17] 121.9 [4.80]
OMSW 315 54.8 [2.16] 91.8 [3.61] 133.2 [5.24]
OMSW 400 68.4 [2.69] 105.4 [4.15] 146.8 [5.78]
OMSW 500 68.4 [2.69] 105.4 [4.15] 146.8 [5.78]

520L0472 • Rev DA • October 2014 19

Technical Information OMSW with brake nose Orbital Motors

Dimensions
OMSW with side port and drain connection
OMSW with side port and drain connection
Ø127.5 [5.000]
Ø126.9 [4.996]
Ø124 [4.88]
Ø94 [3.70]
Ø58.85 [2.317]
Ø58.80 [2.315]
54.3 [2.138]
53.7 [2.114]

2.3 [0.091]
1.7 [0.067]
119.1 [4.69]

R5 [0.18]
140.10 [5.516]
138.25 [5.443]

8 [0.31]

80 [3.15]
43 [3.69]
4 [0.16]

21 [0.83]
L1
L2
L3

C
22 [0.87]

D
7 [0.27]

16 [0.63] 16 [0.63] max. 56 [2.20] max. 51 [2.01]

R18 [0.71] Ø127.0 [5.000]
23 [0.90] Ø126.9 [4.999]
70 [2.76]
Ø13.5 [0.531] E R20 [0.79]
max. 103 [4.06]
max. 133.25 [5.246]

12]
[5.8
Ø76.2 [3.000]

7.62
Not Painted Ø14
Please note:
The stated dimension
is without paint.

max. 133.25 [5.246]

151-2000.13

C: 7/16 - 20 UNF; 11.43 mm [0. 45 in] deep

D: 7/8 - 14 UNF; 16.76 mm [0. 66 in] deep O-ring boss port

E: Thread for external brake 4 x 5/16 - 18 UNC; 13 mm [0.51 in] deep

20 520L0472 • Rev DA • October 2014

Technical Information OMSW with brake nose Orbital Motors

Dimensions

Type L1 mm [in] L2 mm [in] L3 mm [in]

OMSW 125 21.8 [0.86] 58.8 [2.31] 100.2 [3.94]

OMSW 160 27.8 [1.09] 64.8 [2.55] 106.2 [4.18]
OMSW 200 34.8 [1.37] 71.8 [2.83] 113.2 [4.46]
OMSW 250 43.5 [1.71] 80.5 [3.17] 121.9 [4.80]
OMSW 315 54.8 [2.16] 91.8 [3.61] 133.2 [5.24]
OMSW 400 68.4 [2.69] 105.4 [4.15] 146.8 [5.78]
OMSW 500 68.4 [2.69] 105.4 [4.15] 146.8 [5.78]

520L0472 • Rev DA • October 2014 21

Technical Information OMSW with brake nose Orbital Motors

Dimensions
OMSW with end port and check valve
OMSW with end port and check valve
Ø127.0[5.000]
Ø126.9[4.996]
Ø124[4.88]
Ø94[3.70]
Ø58.85[2.317]
Ø58.80[2.315]
54.3[2.138]
53.7[2.114]

2.3[0.091]
1.7[0.067]
119.1[4.69]

R5[0.18]
140.10[5.516]
138.25[5.443]

8[0.31]

80[3.15]
43[3.69]
4[0.16]

21[0.83]
L1
L2

max.103[4.06] max.56[2.20] max.51[2.01]

Ø127.0[5.000]
Ø126.9[4.999]
A A Ø13.5[0.531] E R20[0.79]

D
R23[0.90]
3[0.12]

12]
max.133.25[5.246]

[5.8
7.62
Ø76.2[3.000]

Ø14

31[1.22] 38[1.50] max.133.25[5.246]

A-A

Not Painted
Please note:
The stated dimension
is without paint.

151-2002.13

D: 7/8 - 14 UNF; 16.76 mm [0. 66 in] deep O-ring boss port

E: Thread for external brake 4 x 5/16 - 18 UNC; 13 mm [0.51 in] deep

22 520L0472 • Rev DA • October 2014

Technical Information OMSW with brake nose Orbital Motors

Dimensions

Type L1 mm [in] L2 mm [in]

OMSW 125 21.8 [0.86] 101.8 [4.01]

OMSW 160 27.8 [1.09] 107.8 [4.24]
OMSW 200 34.8 [1.37] 114.8 [4.52]
OMSW 250 43.5 [1.71] 123.5 [4.86]
OMSW 315 54.8 [2.16] 134.8 [5.31]
OMSW 400 68.4 [2.69] 148.4 [5.84]
OMSW 500 68.4 [2.69] 148.4 [5.84]

520L0472 • Rev DA • October 2014 23

Technical Information OMSW with brake nose Orbital Motors

Dimensions
OMSW with end port and drain connection
OMSW with end port and drain connection
Ø127.0[5.000]
Ø126.9[4.996]
Ø124[4.88]
Ø94[3.70]
Ø58.85[2.317]
Ø58.80[2.315]
54.3[2.138]
53.7[2.114]

2.3[0.091]
1.7[0.067]
119.1[4.69]

R5[0.18]
140.10[5.516]
138.25[5.443]

8[0.31]

80[3.15]
43[3.69]
4[0.16]

21[0.83]
L1
L2

max.103[4.06] max.56[2.20] max.51[2.01]

Ø127.0[5.000]
Ø126.9[4.999]
A A Ø13.5[0.531] E R20[0.79]

D
R23[0.90]
3[0.12]

12]
max.133.25[5.246]

[5.8
7.62
Ø76.2[3.000]

Ø14
39[1.53]

5[0.20] max.133.25[5.246]
C 31[1.22] 38[1.50]

A-A
Not Painted
Please note:
The stated dimension
is without paint.

151-2001.13

C: 7/16 - 20 UNF; 11.43 mm [0. 45 in] deep

D: 7/8 - 14 UNF; 16.76 mm [0. 66 in] deep O-ring boss port

E: Thread for external brake 4 x 5/16 - 18 UNC; 13 mm [0.51 in] deep

24 520L0472 • Rev DA • October 2014

Technical Information OMSW with brake nose Orbital Motors

Dimensions

Type L1 mm [in] L2 mm [in]

OMSW 125 21.8 [0.86] 101.8 [4.01]

OMSW 160 27.8 [1.09] 107.8 [4.24]
OMSW 200 34.8 [1.37] 114.8 [4.52]
OMSW 250 43.5 [1.71] 123.5 [4.86]
OMSW 315 54.8 [2.16] 134.8 [5.31]
OMSW 400 68.4 [2.69] 148.4 [5.84]
OMSW 500 68.4 [2.69] 148.4 [5.84]

520L0472 • Rev DA • October 2014 25

Technical Information OMSW with brake nose Orbital Motors

Weight of motors

Code no Weight
kg [lb]
151F2502 10.8 [23.8]
151F2503 11.2 [24.7]
151F2504 11.6 [25.6]
151F2505 12.1 [26.7]
151F2506 12.8 [28.2]
151F2507 13.6 [30.0]
151F2508 13.6 [30.0]
151F2512 10.8 [23.8]
151F2513 11.2 [24.7]
151F2514 11.6 [25.6]
151F2515 12.1 [26.7]
151F2516 12.8 [28.2]
151F2517 13.6 [30.0]
151F2518 13.6 [30.0]
151F2522 10.8 [23.8]
151F2523 11.2 [24.7]
151F2524 11.6 [25.6]
151F2525 12.1 [26.7]
151F2526 12.8 [28.2]
151F2527 13.6 [30.0]
151F2528 13.6 [30.0]
151F2532 10.8 [23.8]
151F2533 11.2 [24.7]
151F2534 11.6 [25.6]
151F2535 12.1 [26.7]
151F2536 12.8 [28.2]
151F2537 13.6 [30.0]
151F2538 13.6 [30.0]

26 520L0472 • Rev DA • October 2014

Technical Information OMSW with brake nose Orbital Motors

520L0472 • Rev DA • October 2014 27

Products we offer: Danfoss Power Solutions is a global manufacturer and supplier of high-quality hydraulic and
electronic components. We specialize in providing state-of-the-art technology and solutions
• Bent Axis Motors
that excel in the harsh operating conditions of the mobile off-highway market. Building on
• Closed Circuit Axial Piston our extensive applications expertise, we work closely with our customers to ensure
Pumps and Motors exceptional performance for a broad range of off-highway vehicles.
• Displays
We help OEMs around the world speed up system development, reduce costs and bring
• Electrohydraulic Power vehicles to market faster.
Steering
• Electrohydraulics Danfoss – Your Strongest Partner in Mobile Hydraulics.

• Hydraulic Power Steering Go to www.powersolutions.danfoss.com for further product information.

• Integrated Systems Wherever off-highway vehicles are at work, so is Danfoss. We offer expert worldwide support
• Joysticks and Control for our customers, ensuring the best possible solutions for outstanding performance. And
Handles with an extensive network of Global Service Partners, we also provide comprehensive global
service for all of our components.
• Microcontrollers and
Software Please contact the Danfoss Power Solution representative nearest you.
• Open Circuit Axial Piston
Pumps
• Orbital Motors
• PLUS+1® GUIDE
• Proportional Valves
• Sensors
• Steering
• Transit Mixer Drives

Comatrol
www.comatrol.com
Schwarzmüller-Inverter
www.schwarzmueller- Local address:
inverter.com
Turolla
www.turollaocg.com
Valmova
www.valmova.com
Hydro-Gear
www.hydro-gear.com
Daikin-Sauer-Danfoss
www.daikin-sauer-danfoss.com

Danfoss
Power Solutions
Danfoss Danfoss Danfoss (Shanghai) Co., Ltd.
Power Solutions (US) Company Power Solutions GmbH & Co. OHG Power Solutions ApS Building #22, No. 1000 Jin Hai Rd
2800 East 13th Street Krokamp 35 Nordborgvej 81 Jin Qiao, Pudong New District
Ames, IA 50010, USA D-24539 Neumünster, Germany DK-6430 Nordborg, Denmark Shanghai, China 201206
Phone: +1 515 239 6000 Phone: +49 4321 871 0 Phone: +45 7488 2222 Phone: +86 21 3418 5200

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to
products already on order provided that such alterations can be made without changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

520L0472 • Rev DA • October 2014 www.danfoss.com © Danfoss A/S, 2014