PRODUCT-DETAILS

PSTX1050-600-70
PSTX1050-600-70 Softstarter - 1050 A - 208 ...
600 V AC

General Information

© 2024 ABB. All rights reserved. 2024/01/26 Subject to change without notice
PSTX1050-600-70 2

Global Commercial Alias PSTX1050-600-70

Extended Product Type PSTX1050-600-70

Product ID 1SFA898120R7000

ABB Type Designation PSTX1050-600-70

EAN 7320500510445

Catalog Description PSTX1050-600-70 Softstarter - 1050 A - 208 ... 600 V AC

The softstarter PSTX1050-600-70 has a rated maximum operational current of 1050 A with
an operating voltage span from 208...600 V AC. The rated control voltage is between
100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop
through a voltage or a torque ramp. It has built-in bypass for easy installation and energy
saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open
state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor
heating and pump cleaning. PSTX also features features jog, braking, stand-still brake,
diagnostics, sequence start and emergency/fire pump mode as standard.To interact with
PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating. There are
Long Description
four ways to communicate with PSTX. It can be done by hardwire inputs Start/Stop/Reset of
fault, and by three programmable digital inputs. Another popular option is the built-in
Fieldbus communication Modbus RTU and incl optional ANYBUS modules with every major
protocol such as for example Profinet, Profibus, Modbus TCP, Ethernet IP and others.
Another way to communicate with PSTX is to use an external adaptor and a Fieldbus plug.
PSTX is the complete alternative for any motor starting application. It’s suitable for medium
to large-sized three-phase motors with nominal currents from 30...1250 A inline connection
or 52...2160 A inside delta connection. Typical applications are, for example, pumps, fans,
compressors, and conveyors.

Ordering
Minimum Order Quantity 1 piece

Customs Tariff Number 85371091

Popular Downloads
Data Sheet, Technical 1SFC132012C0201
Information

Instructions and Manuals 1SFC132081M0201

CAD Dimensional 2CDC001079B0201

Drawing

Wiring Diagram N/A

Dimensions
Product Net Width 435 mm

Product Net Height 515 mm

Product Net Depth / 367 mm

Length

Product Net Weight 62.3 kg

Technical
Rated Operational Voltage 208 ... 600 V AC

Rated Control Supply 100 ... 250 V AC

© 2024 ABB. All rights reserved. 2024/01/26 Subject to change without notice
PSTX1050-600-70 3

Voltage (U s )

Rated Control Circuit 24 V DC

Voltage (U c )

Rated Frequency (f) 50/60 Hz

Main Circuit 50 / 60 Hz

Rated Operational Power (230 V) 315 kW

- In-Line Connection (Pe) (400 V) 560 kW
(500 V) 730 kW

Rated Operational Current 1050 A

- In-Line Connection (Ie)

Rated Operational Power at 230 V 500 kW

- Inside Delta Connection at 400 V 1000 kW
at 500 V 1250 kW

Rated Operational Current 1810 A

- Inside Delta Connection

Service Factor 100 %

Percentage

Overload Protection Built-in electronic overload protection

Integrated Electronic Yes

Overload

Adjustable Rated Motor 30 ... 100 %

Current Ie

Starting Capacity at 4xIe for 10s

Maximum Rated Current
Ie

Ramp Time 1 ... 120 second [unit of time]

Initial Voltage During Start 10 ... 99 %

Step Down Voltage 100 ... 10 %

Special Ramp

Current Limit Function 1.5 ... 7.5 xle

Switch for Inside Delta Yes

Connection

Run Signal Relay Yes

By-pass Signal Relay Yes

Fault Signal Relay Yes

Overload Signal Relay Yes

Analog Outputs 0…10 V, 0…20 mA, 4…20 mA

Signal Indication Ready to Green

Start/Standby ON (LED)

Signal Indication Running Green

R (LED)

Signal Indication Yellow

Protection (LED)

Signal Indication Fault Red

(LED)

Communication Modbus-RTU; Modbus-TCP; Ethernet-IP; EtherCAT; DeviceNet; CANopen;

Profibus; Profinet; BACnet-IP; BACnet-MSTP

Degree of Protection IP00

Terminal Type Main Circuit: Bars

Connecting Capacity Rigid 1 x 2.5 mm²

Control Circuit

Connecting Capacity Rigid 1 x 2.5 mm²

© 2024 ABB. All rights reserved. 2024/01/26 Subject to change without notice
PSTX1050-600-70 4

Supply Circuit

Tightening Torque Main Circuit 45 N·m

Product Main Type PSTX1050

Function Auto phase sequence detection

Automatic restart
Current limit
Current limit ramp
Dual current limit
Dynamic brake
Electricity metering
Electronic overload Time-to-cool
Emergency mode
Event log
Full voltage start
Jog with slow speed, forward and reverse
Keypad password
Kick start
Limp mode with two-phase motor control if one set of thyristors is shorted
Motor heating
Pre-start function
Pump cleaning
Real time clock
Sequence start
Soft start with torque control
Soft start with voltage ramp
Soft stop with torque control
Soft stop with voltage ramp
Stand still brake
Start reverse (external contactors)
Thyristor runtime measurement
Torque limit
Voltage sags detection

Protection Function Bypass open protection; Current imbalance protection; Current underload
protection; Dual overload (separate overload for start and run); Earth fault
protection / ground fault protection; Electronic overload protection, EOL;
Extension IO failure protection; Fieldbus failure protection; HMI failure
protection; Locked rotor protection; Max number of starts/hour; Over voltage
protection; Phase reversal protection; Power factor underload protection; PT-
100 connection; PTC connection; Too long current limit protection; Too long
start time protection; Under voltage protection; User defined protection; Voltage
imbalance protection

Warning Details Current imbalance warning; Current underload warning; Electronic overload
Time-to-trip; EOL warning; Faulty fan warning; Locked rotor warning; Motor
runtime limit warning; Over voltage warning; Phase loss warning (for standby);
Power factor underload warning; Short circuit warning (for Limp mode); THD(U)
- Total Harmonic Distortion warning; Thyristor overload warning (SCR); Under
voltage warning; Voltage imbalance warning

Technical UL/CSA
Maximum Operating Main Circuit 600 V
Voltage UL/CSA

Tightening Torque Main Circuit 398.3

UL/CSA

Environmental
Ambient Air Temperature Operation -25 ... +60 °C
Storage -40 ... +70 °C

Degree of Protection IP00

© 2024 ABB. All rights reserved. 2024/01/26 Subject to change without notice
PSTX1050-600-70 5

RoHS Information 2CMT005210

RoHS Status Following EU Directive 2002/95/EC August 18, 2005 and amendment

Certificates and Declarations

CQC Certificate CN: CQC2015010304830298 / SE: CQC2015010304830294

Declaration of Conformity CN: 2020980304001097 / SE: 2020980304001508

- CCC

Declaration of Conformity 2CMT005209

- CE

Container Information
Package Level 1 Width 600 mm

Package Level 1 Depth / 616 mm

Length

Package Level 1 Height 800 mm

Package Level 1 Gross 74.3 kg

Weight

Package Level 1 EAN 7320500510445

Package Level 1 Units box 1 piece

Classifications
Object Classification Code Q

ETIM 7 EC000640 - Soft starter

ETIM 8 EC000640 - Soft starter

ETIM 9 EC000640 - Soft starter

eClass V11.0 : 27370907

UNSPSC 39121521

IDEA Granular Category 4740 >> Soft starter

Code (IGCC)

Accessories
Unit Of
Identifier Description Type Quantity
Measure

KIT FC CuAl
3x185mm2 T6
1SDA013956R1 KIT FC CuAl 3x185mm2 T6 800-S6 800 6pcs 1 piece
800-S6 800
6pcs

KIT FC CuAl
1SDA054988R1 KIT FC CuAl 1x185mm2 T4 3pcs 1x185mm2 T4 1 piece
3pcs

KIT FC CuAl
1SDA055020R1 KIT FC CuAl 1x240mm2 T5 400 3pcs 1x240mm2 T5 1 piece
400 3pcs

© 2024 ABB. All rights reserved. 2024/01/26 Subject to change without notice
PSTX1050-600-70 6

KIT FC CuAl
2x240mm2 T6
1SDA023380R1 KIT FC CuAl 2x240mm2 T6 630-S6 630 3pcs 1 piece
630-S6 630
3pcs

1SFN074810R1000 LX205 Terminal Extension LX205 1 piece

1SFN075410R1000 LX370 Terminal Extension LX370 1 piece

1SFN075710R1000 LX460 Terminal Extension LX460 1 piece

1SFN074307R1000 LW110 Terminal Enlargement LW110 1 piece

1SFN074807R1000 LW205 Terminal Enlargement LW205 1 piece

1SFN075407R1000 LW370 Terminal Extension LW370 1 piece

1SFN075707R1000 LW460 Terminal Enlargement LW460 1 piece

1SFN076107R1000 LW750 Terminal Enlargement LW750 1 piece

1SFN124801R1000 LT205-30C Terminal Shroud LT205-30C 1 piece

1SFN124803R1000 LT205-30L Terminal Shroud LT205-30L 1 piece

1SFN125401R1000 LT370-30C Terminal Shroud LT370-30C 1 piece

1SFN125403R1000 LT370-30L Terminal Shroud LT370-30L 1 piece

1SFN125406R1000 LT370-30D Terminal Shroud LT370-30D 1 piece

1SFN125701R1000 LT460-AC Terminal shroud LT460-AC 1 piece

1SFN125703R1000 LT460-AL Terminal shroud LT460-AL 1 piece

1SFN126101R1000 LT750-AC Terminal shroud LT750-AC 1 piece

1SFN126103R1000 LT750-AL Terminal shroud LT750-AL 1 piece

1SFA899314R1001 PSCA-1 USB cable PSCA-1 1 piece

AB-PROFIBUS
1SFA899300R1001 AB-PROFIBUS-1 Communication Module 1 piece
-1

AB-
1SFA899300R1002 AB-DEVICENET-1 Communication Module 1 piece
DEVICENET-1

AB-MODBUS-
1SFA899300R1003 AB-MODBUS-RTU-1 Communication Module 1 piece
RTU-1

AB-
1SFA899300R1006 AB-ETHERNET-IP-2 Communication Module ETHERNET-IP 1 piece
-2

AB-MODBUS-
1SFA899300R1008 AB-MODBUS-TCP-2 Communication Module 1 piece
TCP-2

AB-PROFINET
1SFA899300R1010 AB-PROFINET-IO-2 Communication Module 1 piece
-IO-2

AB-BACNET-
1SFA899300R1011 AB-BACNET-MSTP-1 Communication Module 1 piece
MSTP-1

AB-
1SFA899300R1012 AB-ETHERCAT-IP-2 Communication Module ETHERCAT-IP 1 piece
-2

DX111-FBP.0 IO-Module for UMC100 DI 24 VDC,

1SAJ611000R0101 DX111-FBP.0 1 piece
supply 24VDC

DX122-FBP.0 IO-Module for UMC100 DI

1SAJ622000R0101 DX122-FBP.0 1 piece
110/230VAC, supply 24VDC

1SFA896312R1002 PS-FBPA Fieldbus plug kit PS-FBPA 1 piece

© 2024 ABB. All rights reserved. 2024/01/26 Subject to change without notice
PSTX1050-600-70 7

Categories

Drives → Softstarters → Softstarters → PSTX Softstarters → PSTX1050

Low Voltage Products and Systems → Control Products → Softstarters → Softstarters → PSTX Softstarters → PSTX1050

© 2024 ABB. All rights reserved. 2024/01/26 Subject to change without notice