Equalizer
(EQ665, EQ898, EQ799)
Contents
（1）EQ665........................................................................................................................... - 1 -
（2）EQ898........................................................................................................................... - 3 -
（3）EQ799........................................................................................................................... - 4 -
（4）EQ231........................................................................................................................... - 5 -
Connection Diagram............................................................................................................... - 6 -
Common faults and solutions................................................................................................. - 7 -
EQ665, EQ898, EQ799 Equalizer
（1）EQ665
1. Power switch
2. The marquee lights up straight or
the marquee switch mode
3. Play channel switching
4. U disk/card reader socket
5. Last song
6. Pause/Play/Bluetooth switch
7. Next song
8. Left 10 tuning
9. Right 10 Tuning
Note：
This button needs to be pressed for 3-5 seconds before Bluetooth switch USB card reader,
It can only be switched when using Bluetooth, U disk, and radio!
1. USB/DVD audio source input;
2. CD/TA audio source input;
3. TAPE/TUNER audio source input;
4. CD/AUX audio source input;
5. REC recording equipment/power amplifier output;
6. OUT audio source output is connected to an amplifier;
7. AC220V power cord.
-1-
EQ665, EQ898, EQ799 Equalizer
EQ665 connection instructions:
Functions:
1. Left channel equalization adjustment: Move up to increase the corresponding frequency, move
down to attenuate the corresponding frequency.
2. Power switch.
3. The potentiometer indicator light moves and stops switching buttons.
4. DVD, TAPE, TUNER, AUX four channel input selection.
5. Color fluorescent display: display the working status of the machine and the user's operation
information on the device.
6. Spectrum level amplitude control: Control the high level (HIGH) amplitude of the spectrum.
7. Spectrum level and amplitude control: Control the low level (LOW) amplitude of the spectrum.
8. EQ and direct mode switch key.
9. Right channel equalization adjustment: move up to increase the corresponding frequency,
move down to attenuate the corresponding frequency.
-2-
EQ665, EQ898, EQ799 Equalizer
（2）EQ898
1.Power switch.
2. The marquee lights up straight or
the marquee switch mode
3. Play channel switching
4. U disk/card reader socket
5. Last song
6. Pause/Play/Bluetooth switch
7. Next song
8. Left channel balance adjustment
9. Right channel balance adjustment
Note：
This button needs to be pressed for 3-5 seconds before Bluetooth switch USB card reader,
It can only be switched when using Bluetooth, U disk, and radio!
1. USB/DVD audio source input;
2. CD/TA audio source input;
3. TAPE/TUNER audio source input;
4. CD/AUX audio source input;
5. REC recording equipment/power amplifier output;
6. OUT audio source output is connected to an amplifier;
7. AC220V power cord
-3-
EQ665, EQ898, EQ799 Equalizer
（3）EQ799
1. Signal input switching
2. Equalization effect and direct switching
3. Power switch
4. Left channel effect adjustment
5. Right channel effect adjustment
1. AUX line signal input
2. DVD signal input
3. REC recording output (connect to recording equipment or amplifier)
4. OUT signal output (connect to power amplifier)
5. AC220V power cord
-4-
EQ665, EQ898, EQ799 Equalizer
（4）EQ231
1. Power switch
2. Left channel volume adjustment
3. Right channel volume adjustment
4. Spectrum light music beating spectrum light
5. A/B channel switching (pressing in is for B Channel playback, pop-up is A Channel playback)
6. Equalization effect is on (press in is equalization effect output, pop-up is direct output)
1. Group A audio input
2. Group B audio input
3. Audio signal output, connect to power amplifier
4. The left audio signal output (card faucet) connects to the power amplifier
5. Right audio signal output (card faucet) connected to the power amplifier
-5-
EQ665, EQ898, EQ799 Equalizer
Connection Diagram
A = Equalizer F = Active speakers, subwoofer
B = CD player, network set-top box G = Power amplifier (DVD, AUX, etc.) input
C = DVD player port
D = PC, mobile phone, TV, radio H1 = Left speaker
E = Independent background music processor H2 = Right speaker
-6-
EQ665, EQ898, EQ799 Equalizer
Common faults and solutions
malfunction Check item Method of exclusion
1.Check whether the power cord is loose; Plug in the power cord
Can not boot
2.Check if there is any key stuck; Check button
1.Check whether the input line and output line are Correct wiring
connected reversely;
Balance has no
2.Check whether Direct (direct mode) is turned on; Toggle EQ key
effect
3.Check whether the output line is plugged into the Should be plugged into
BT/OUT socket by mistake; OUT
1.Check whether the ground wire of the audio cable Tighten or change the
shell is in poor contact; line
2.Whether the machine is interfered by surrounding Keep away from
Electric current
machines; sources of interference
3.check whether the sound source machine itself Overhaul the audio
has electric current sound; machine
1.Check whether the current equalization mode Adjust the equalization
Little effect curve has increased or not attenuated much; curve
change 2.Check whether the speakers have burnt the bass, Overhaul speakers
mid-range, or tweeter;
1.Check whether the output signal of the sound Turn on the sound
Small beating source machine is too small; source volume
frequency 2.Check whether the HIG button is in HIG (high Switch HIG mode
level) mode;
1.Check whether the volume of the power amplifier Turn down the
is too loud and distorted; amplifier volume
The speaker is 2.Check whether the signal is too strong and has Turn down the sound
noisy exceeded the input sensitivity requirement of the source volume
power amplifier;
3.Check whether the horn diaphragm is damaged; Overhaul the horn
1.Check whether the input and output wiring is Correct wiring
connected correctly;
2.Check whether the equalizer INPUT button selects Press INPUT key to
the corresponding channel: select
No sound
3.check whether the INPUT switch of the power Amplifier selection
amplifier selects the corresponding channel; channel
4.check whether the power amplifier and speakers Test power amplifier,
can be used normally; speaker
1.Check whether the music signal of the audio Test sound source
source is normal;
2.Check whether the wiring is plugged into the Correct wiring
corresponding channel one-red one white socket;
-7-
EQ665, EQ898, EQ799 Equalizer
One channel is 3.Check whether the L/R balance switch of the Check the power
silent power amplifier is centered on the balance point; amplifier balance
switch
4.check whether the power amplifier is normally Test amplifier
two-channel output;
5.check whether the silent speaker speaker is Test speaker
normal;
Special Instructions for Bluetooth connection:
Step 1: connect the equalizer and power amplifier and other related equipment;
Step 2: Press the INPUT button on the equalizer or remote control to select the BT/USB channel;
Step 3: Turn on the Bluetooth function in the phone settings;
Step 4: Search for available devices (AOP);
Step 5: Click (AOP) to pair and connect, and it will show connected;
Step 6: Open your music software to play music.
Note:
In order to facilitate the mobile phone to search for Bluetooth faster, it is recommended to pull
out the U disk first.
These 3 buttons need to be switched when using Bluetooth, U disk, or radio. For other
functions, please read the instructions in detail.
(Some models do not have radio function)
-8-
