72HL4-BDV

570-590 Watt
BIFACIAL MODULE WITH DUAL GLASS

N-type

N-Type Technology HOT 2.0 Technology 100%

99%

N-Type modules with Tunnel Oxide N-type modules with JinkoSolar's HOT
Passivating Contacts (TOPcon) technology 2.0 technology offer better reliability and
offer lower LID/LeTID degradation and efficiency.
87.4%
better low light performance.
1 15 25 30

Year Year 

Dual-Sided Power Mechanical Load
Product Linear Power First-year Annual
Warranty Warranty Degradation Degradation

Generation Enhanced
Over 30 Years

· IEC61215 (2016) / IEC61730 (2016)

Dual-sided power generation gain Certified to withstand: · IEC61701 / IEC62716 / IEC60068 / IEC62804
increases with backside exposure to 5400 Pa front side max static test load · ISO9001:2015: Quality Management System
light, significantly reducing LCOE. 2400 Pa rear side max static test load · ISO14001:2015: Environment Management
System
· ISO45001:2018: Occupational health and
safety management systems

SMBB Technology Anti-PID guarantee

Better light trapping and current Minimizes the chance of degradation
collection to improve module power caused by PID phenomena through
output and reliability. optimization of cell production
technology and material control. EU-JKM570-590N-72HL4-BDV-F8-EN

Mechanical Characteristics Engineering Drawings
Cell Type N -type Mono-crystalline 2278±2 mm
A
No. of cells 144 (72×2)
Dimensions 2278×1134×30 mm
Weight 31.0 kg

1134±2 mm
Front Glass 2.0 mm, Anti-Reflection Coating
Back Glass 2.0 mm, Heat Strengthened Glass
Frame Anodized Aluminium Alloy
Junction Box IP68 Rated B B
Protection Class Class II A
1400±1 mm
IEC Fire Type Class C
1100±1 mm
4.0 mm2 400±1 mm
Output Cables
(+): 400 mm , (-): 200 mm or Customized Length

Packaging Configuration

1096±2 mm
Pallet Dimensions 2338×1140×1251 mm
Packing detail 36 pcs/pallets, 72 pcs/stack,
(Two pallets=One stack) 720 pcs/ 40'HQ Container

Specifications (STC)
Maximum Power ‒ Pmax [Wp] 570 575 580 585 590 14 10
Maximum Power Voltage ‒ Vmp [V] 43.58

30±1

30±1
43.73 43.88 44.02 44.17
Maximum Power Current ‒ Imp [A]
9
13.08 13.15 13.38 13.29 13.36

7
28 11

R3
R4
Open-circuit Voltage ‒ Voc [V] 52.10 52.30 52.31 52.70 52.90

.5
.5
A-A B-B
Short-circuit Current ‒ Isc [A] 13.83 13.89 14.01 14.01 14.07 Note: For specific dimensions and tolerance ranges, please
refer to the corresponding detailed module drawings.
Module Efficiency STC [%] 22.07 22.26 22.45 22.65 22.84
Power Tolerance 0 ~ +3 %
Temperature Coefficients of Pmax -0.29 %/°C Electrical Performance
Temperature Coefficients of Voc -0.25 %/°C
Temperature Coefficients of Isc 0.045 %/°C Power-Voltage Curves (72HL4-BDV 580W)
630
STC: Irradiance 1000W/m , Cell Temperature 25°C, AM=1.5
2
580
490 1000 W/ m2

Specifications (NOCT) 420

800 W/ m2
350
Power ( W)

Maximum Power ‒ Pmax [Wp] 430 433 437 441 445 280 600 W/ m2

Maximum Power Voltage ‒ Vmp [V] 40.56 40.73 40.89 41.05 41.21 210
400 W/ m2
140
Maximum Power Current ‒ Imp [A] 10.59 10.64 10.69 10.74 10.79 70 200 W/ m2

Open-circuit Voltage ‒ Voc [V] 49.49 49.68 49.87 50.06 50.25 0

0 10 20 30 40 50 60
Short-circuit Current ‒ Isc [A] 11.16 11.21 11.26 11.31 11.36 Voltage (V)
NOCT: Irradiance 800W/m2, Ambient Temperature 20°C, AM=1.5, Wind Speed 1m/s
Current-Voltage Curves (72HL4-BDV 580W)
16
Application Conditions
1000W/㎡
14
12 800W/㎡
Operating Temperature -40 °C ~ +85 °C
10
600W/㎡
Maximum System Voltage 1500 VDC (IEC)
Current (A)

Maximum Series Fuse Rating 30 A

400W/㎡
6
4 200W/㎡
Nominal Operating Cell
45±2 °C 2
Temperature -NOCT 0
0 10 20 30 40 50 55
Refer. Bifacial Factor 80±5 %
Voltage (V)

© 2024 Jinko Solar Co., Ltd. All rights reserved. EU-JKM570-590N-72HL4-BDV-F8-EN

Note: Please read the safety and installation manual before using the product. We reserve the right of final www.jinkosolar.com
interpretation. The specifications in this datasheet are subject to change without notice. www.jinkosolar.eu