Series H

Heavy Duty
Industrial
Hydraulic
Cylinders

Catalog HY04-AC1140-5/US
August, 2015
 ESP Series Cylinders EM Series Cylinders
Operating Pressure to 3000 PSI Operating Pressure to 3000 PSI

View
Table of
Contents

Electronic Stroke Positioning heavy duty cylinders with Remote Electronics with resolution to .0005", operating
resolution to .0005", operating pressure to 3000 PSI. pressure to 3000 PSI. Electronic module change out
without removing or disassembly of the cylinder.

MH Series Cylinders Custom Cylinders

Standard Operating Pressure to 2000 PSI

Mill Hydraulic with bolted head construction, standard Bores to 42" and Strokes to 900". Full range of offering
operating pressure to 2000 PSI and modified to 3000 from micro cylinders to cylinders over 40,000 lbs.
PSI. Only standard non tie rod Mill Cylinder to meet
NFPA interchange.

In line with our policy of continuing product improvement, specifications and information contained
in this catalog are subject to change.
Copyright ©2015 by Parker Hannifin Corporation.
All rights reserved.
PRINTED IN THE U.S.A.

WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH,
PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from the Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation
by users having expertise. It is important that you analyze all aspects of your application, including consequences of any failure and review the information concerning the product
or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing,
is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation
and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized
distributors. This offer and its acceptance are governed by provisions stated on a separate page of the document entitled ‘Offer of Sale’.

Atlas Cylinders
Des Plaines, IL USA
Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Table of Contents Atlas Series H

Table of Contents Page

Specifications, Mounting Styles ........................................................................................................................................ 3, 35
Cylinder Features .................................................................................................................................................... 4, 5, 19, 34
Bore Sizes
11/2" to 6" 7" & 8"
10" - 20"
Styles NM1, NM2, NM3 Tie Rods Extended Mounts
(Both Ends NFPA MX1, Cap End NFPA MX2, Head End NFPA MX3) ......................... 6, 7 ................20, 21............ 36, 37
Style REF2, Head Rectangular Flange Mount (NFPA MF1) ............................................. 8, 9 ............... 22, 23 ............. N/A
Style REF1, Head Square Flange Mount (NFPA MF5) ..................................................... 8, 9 ............... 22, 23 ............. N/A
Style ME5, Head Rectangular Mount (NFPA ME5)........................................................... 8, 9 ............... 22, 23 ........... 38, 39
Style IH3, Head Square Flange Mount (NFPA MF5) ........................................................ N/A ..................N/A.............. 38, 39
Style BEF2, Cap Rectangular Flange Mount (NFPA MF2) ............................................. 10, 11 ..............24, 25.............. N/A
Style BEF1, Cap Square Flange Mount (NFPA MF6) ..................................................... 10, 11 ..............24, 25.............. N/A
Style ME6, Cap Rectangular Mount (NFPA ME6) ........................................................... 10, 11 ..............24, 25............ 40, 41
Style IH4, Cap Square Flange Mount (NFPA MF6)........................................................... N/A ..................N/A.............. 40, 41
Style SL, Side Lug Mount (NFPA MS2)........................................................................... 12, 13 ............. 26, 27 ........... 40, 41
Style FS, Side Tap Mount (NFPA MS4)........................................................................... 12, 13 ............. 26, 27 ............. N/A
Style PB2, Cap Fixed Clevis Mount (NFPA MP1)............................................................ 14, 15 ............. 28, 29 ........... 42, 43
Style TM1, Head Trunnion Mount (NFPA MT1) ............................................................... 16, 17 ..............30, 31 ........... 42, 43
Style TM2, Cap Trunnion Mount (NFPA MT2)................................................................. 16, 17 ..............30, 31 ........... 42, 43
Style TM3, Intermediate Trunnion Mount (NFPA MT4).................................................... 16, 17 ..............30, 31 ........... 42, 43
Style SA, Spherical Bearing Mount (NFPA MPU3) ......................................................... 50, 53 ................N/A................ N/A

Double Rod End Cylinders, B & R Table ........................................................................................................................ 32, 44

Linear Alignment Couplers ................................................................................................................................................... 45
Cylinder Accessories .......................................................................................................................................................46-49
Dual Axis Knuckle ................................................................................................................................................................. 50
Spherical Bearing Mount ................................................................................................................................................. 51-53
Spherical Bearing Mount Accessories.................................................................................................................................. 54
“Style 5” Piston Rod End, Split Couplers & Weld Plates .................................................................................................55-56
Push and Pull Forces ............................................................................................................................................................ 57
Operating Fluids and Temperature Range ........................................................................................................................... 58
Cylinder Pressure Ratings, Style 4 Minimum Stroke, Cylinder Weights .........................................................................59-60
Ports .................................................................................................................................................................................61-62
Stroke Data ........................................................................................................................................................................... 63
Tie Rod Supports .................................................................................................................................................................. 63
Stroke Adjusters .................................................................................................................................................................... 63
Stop Tube, Mounting Classes ............................................................................................................................................... 64
Piston Rod Selection Chart and Data..............................................................................................................................65-66
Thrust Key Mountings ........................................................................................................................................................... 67
Rod Gland Drain ................................................................................................................................................................... 67
End-of-Stroke Magnetic Principle Type Proximity Switch .................................................................................................... 68
Parts List, Seal Kits, and Maintenance Instructions ............................................................................................. 69-71, 72-73
How to Order an Atlas Cylinder ....................................................................................................................................... 74-75
Cylinders for Wood Products Applications ........................................................................................................................... 75
Cylinder Safety Guide ......................................................................................................................................................76-77
Offer of Sale ........................................................................................................................................................................ IBC

Atlas Cylinders
1 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Features Atlas Series H

View
Table of
Contents Atlas Series H
Heavy-Duty
Hydraulic Cylinder
When the application demands a heavy-duty
cylinder with maximum performance, specify
Atlas Series H. This cylinder has standard
design features to maximize machine uptime.
The standard bronze rod gland, case-
hardened piston rod, high strength piston
rod stud and tie rod material combine to
make Series H the cylinder for demanding
applications up to 3000 psi.
Thorough inspection and performance
testing of each cylinder before shipment
assure Series H cylinder quality. See the
following pages for the inside story on all
the features that make Series H the high
performance, long lasting choice for all your
heavy-duty hydraulic applications.

Atlas Cylinders
2 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Specifications / Mountings Atlas Series H

Standard Specifications
View
Table of • Heavy Duty Service – ANSI (NFPA) T3.6.7R3-2009 • Standard – Externally removable bolted gland assembly
Contents Mounting and Specification Dimensions • Strokes – Available in any practical stroke length
• Standard Construction – Square Head – Tie Rod Design • Cushions – Optional at either end or both ends of stroke.
• Nominal Pressure – 3000 P.S.I.* “Float Check” at cap end.
• Standard Fluid – Hydraulic Oil • Rod Ends – Four Standard Choices – Specials to Order
• Standard Temperature – -10° F to +165° F
• Bore Sizes – 11/2" through 6" * If hydraulic operating pressure exceeds 3000 P.S.I., send
application data for engineering evaluation and recommendation.
• Piston Rod Diameter – 5/8" through 4" See page 58 for actual design factors.
• Mounting Styles – 16 standard styles at various
application ratings
In line with our policy of continuing product improvement, specifications in this catalog are subject to change.
Mounting Styles
Tie Rods Extended Head Rectangular Flange Head Square Flange Head Rectangular
Style NM1 - Both Ends Style REF2 Style REF1 Style ME5
Style NM2 - Cap End
Style NM3 - Head End

(BOTH ENDS NFPA MX1)

(CAP END NFPA MX2) (NFPA MF1) (NFPA MF5) (NFPA ME5)
(HEAD END NFPA MX3)

Cap Rectangular Flange Cap Square Flange Cap Rectangular Side Lug
Style BEF2 Style BEF1 Style ME6 Style SL

(NFPA MF2) (NFPA MF6) (NFPA ME6) (NFPA MS2)

Side Tap Cap Fixed Clevis Cap Fixed Eye with Head Trunnion
Spherical Bearing
Style FS Style PB2
Style SA Style TM1

(NFPA MS4) (NFPA MP1) (NFPA MPU3) (NFPA MT1)

Cap Trunnion Intermediate Trunnion

Style TM2 Style TM3

(NFPA MT2) (NFPA MT4)

Atlas Cylinders
3 Des Plaines, IL USA
 Atlas. . .
Series H – your best choice in Steel Head – Bored and
View
Table of
heavy duty hydraulic cylinders grooved to provide concentricity
for mating parts.

Contents
End Seal – Pressure-actuated
cylinder tube-to-head and
cap “O” rings.
Primary Seal – “Tri-Lip” Rod Seal is a
proven leak proof design – completely
self-compensating and self-relieving
to withstand variations and conform to
mechanical deflection that may occur.

Secondary Seal –
Rod Wiper – wipes clean
any oil film adhering to the
rod on the extend stroke
and cleans the rod on the
return stroke.

Piston Rod Stud –

Furnished on 2" diameter
rods and smaller when
standard style #1 rod end
threads are required. Studs
have rolled threads and are
made from high strength
steel. Anaerobic adhesive
is used to permanently lock
the stud to the piston rod. Rod Gland Assembly –
Standard bronze bearing is
externally removable without
cylinder disassembly. Long
inboard bearing surface is ahead
of the seals assuring lubrication
by cylinder operating fluid. A spiral
groove on the bearing area helps Alloy Steel Tie Rod Nuts
eliminate drag pressure that can
cause damage to the rod seal and Align-A-Groove – A 3/16"
provides positive lubrication for wide surface machined at
less wear. each end of the cylinder
body. Makes precise
mounting quick and easy.

Stepped floating cushions This is a constant shape

in order to have some
combine the best features of flexibility in application.
The stepped cushion
known cushion technology. design shows reduced
pressure peaks for most
Deceleration devices or built-in “cushions” are optional and can be supplied load and speed
at head end, cap end, or both ends without change in envelope or mounting conditions, with com-
dimensions. Atlas cylinder cushions are a stepped design and combine the parable reduction of
best features of known cushion technology. objectionable stopping
Standard straight or tapered cushions have been used in industrial forces being transmitted
cylinders over a very broad range of applications, extensive research has to the load and the
found that both designs have their limitations. support structure.
As a result, we have taken a new approach in cushioning of industrial All Atlas H cushions are
hydraulic cylinders and for specific load and velocity conditions have been adjustable.
able to obtain deceleration curves that come very close to the ideal. The The Series H cylinder
success lies in a stepped sleeve or spear concept where the steps are design incorporates the
calculated to approximate theoretical orifice areas curves. longest cushion sleeves
In the cushion performance chart, pressure traces show the results of or cushion spears that
typical orifice flow conditions. Tests of a three-step sleeve or spear show can be provided in the
three pressure pulses coinciding with the steps. The deceleration curve standard envelope
shape comes very close to being theoretical, with the exception of the last without decreasing the
1
/2 inch of travel. rod bearing and piston bearing lengths.

Atlas Cylinders
4 Des Plaines, IL USA
 Piston Rod – Medium Adjustable Floating Stepped Cushions –
carbon steel, induction For maximum performance – economical
case-hardened, hard and flexible for even the most demanding
chrome-plated and applications – provides superior performance
polished to 10 RMS in reducing shock. Cushions are optional Ports – S.A. E. “O”-
finish. and can be supplied at head end, cap end, ring ports are standard
or both ends without change in envelope or
mounting dimensions. OPTIONAL PORTS
View Ports – N.P.T.F. ports
Table of are optional at no extra
charge. Oversize N.P.T.F.
Contents and S.A.E. ports are
available at extra charge.

Atlas Gland Assembly with “Tri-Lip” Rod Seal

Gland Assembly externally removable without cylinder disassembly.
An O-ring is used as a seal between the gland and head. The
“Tri-Lip” rod seal has multiple sealing edges to produce “dry rod”
performance. It is molded from a special polyurethane material that is
extremely resistant to abrasion and extrusion, resulting in exceptional
service life. Wiperseal cleans rod of dirt, preventing it from entering
the gland and also acts as a secondary rod seal.

OPTIONAL
PISTONS

Step cut iron piston rings are optional.

Steel Cap – Bored and

grooved to provide
concentricity for mating parts.
Piston with Retainer Nut – Optional at no
extra charge.
Lipseal™ Piston – Zero leak-
age under static conditions for
hydraulic pressures up to 3000 High Strength Tie Rods
PSI. Seals are self-compensat- – Made from 100,000 PSI
ing to conform to variations in minimum yield steel with
pressure, mechanical deflection, rolled threads for
and wear. Back-up washer added strength. FILLED BRONZE
PTFE FILLED PTFE
prevents extrusion. BEARINGS RINGS
Hi Load Piston – Optional at extra charge
(11/2-6 inch bores). Includes wear rings and
bronze-filled PTFE seals. Two wear rings serve
as bearings which deform radially under side-
One-Piece Nodular Iron The Cylinder Barrel – loading, enabling the load to be spread over a
Piston – The wide piston Heavy-wall steel tubing, larger area and reduce unit loading. Bronze-
surface contacting cylinder honed to a micro finish filled PTFE seals are designed for extrusion-
bore reduces bearing loads. bore. free, leak-proof service and longer cylinder life
Anaerobic adhesive is used than the lipseal type piston. Not available with
SYNTHETIC RUBBER
to permanently lock and seal EXPANDER RINGS retainer nut.
the piston to the rod.

(1) When a cushion is specified at the head end: (2) When a cushion is specified at the cap end:
a. A self-centering stepped sleeve is furnished on the piston rod assembly. a. A stepped spear is provided on the piston rod.
b. A needle valve is provided that is flush with the side of the head even b. A “float check” self-centering bushing is provided which incorporates a
when wide open. It may be identified by the fact that it is socket-keyed. large flow check valve for fast “out-stroke” action.
It is located on side number 2, in all mounting styles except ME5, ME6, c. A socket-keyed needle valve is provided that is flush with the side of
TM1, TM2 and TM3. In these styles it is located on side number 3. the cap when wide open. It is located on side number 2 in all mounting
c. On 6" bore and larger cylinders, a springless check valve is provided styles except ME5, ME6, TM1, TM2 and TM3. In these styles it is
that is also flush with the side of the head and is mounted adjacent to the located on side number 3.
needle valve except on mounting style SL, where it is mounted opposite
the needle valve. It may be identified by the fact that it is slotted.
d. On 11/2" - 5" bore cylinders a slotted sleeve design is used in place of
the check valve. STEPPED CUSHIONS
1 1 ROD END SLEEVE CAP END SPEAR
e. 1 /2" - 2 /2" bore cylinders use cartridge style needle valve (see Figure A).

Figure A

Atlas Cylinders
5 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
11/2" to 6" Bore Sizes Atlas Series H

Tie Rods Extended Both Ends Mount

Style NM1 ZB + STROKE
View Y P + STROKE
E
Table of R W LB + STROKE
Contents 1 EE DD

RD
AA
4 2 R E MM

3 K K
BB F G J BB

Tie Rods Extended Cap End Mount

Style NM2 ZB + STROKE
ZJ + STROKE
Y P + STROKE
E WF LG + STROKE
R RT EE
1

AA
4 2 R E MM

3 K
K G J BB

Tie Rods Extended Head End Mount

Style NM3 ZB + STROKE
Y P + STROKE
E
W LB + STROKE
R DD
1 EE

RD
AA
4 2 R E MM

3 K
BB F G J K

Rod End Dimensions (for Retainer Held Gland) – See Table 2

See chart on page 32 to determine which bore, rod and mount combinations have this feature.
Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread
Small Male Intermediate Male Short Female Stub End Style 4
LA LA
A W A W A Special thread,
D WRENCH extension, rod eye,
FLATS .125
NA NA
blank, etc., are also
available.
B MM B MM B MM B MM To order, specify
20°
KK
KK “Style 4” and give
D WRENCH CC NA desired dimensions
FLATS for KK, A and W.
D WRENCH
FLATS
C C C If otherwise special,
V V V
F G
V
F G
W F G W F G furnish dimensioned
sketch.
A high strength rod end stud is supplied on thread style 1 through 2" are recommended through 2" piston rod diameters and style 2 rod ends
diameter rods. Larger sizes or special rod ends are cut threads. Style 1 are recommended on larger diameters. Use style 3 for applications where
rod ends are recommended where the workpiece is secured against the female rod end threads are required. If rod end is not specified, style 1 will
rod shoulder. When the workpiece is not shouldered, style 1 rod ends be supplied.

Atlas Cylinders
6 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
11/2" to 6" Bore Sizes Atlas Series H

Table 1—Envelope and Mounting Dimensions

EE Add Stroke
View Bore AA BB DD E
NPTF SAE F G J K R LB LG P
Table of
5
Contents 5 4 /8 2 7 /8
1 3 1 1 3 3 3
1 /2 2.3 3
1 /8 /8-24 2 /2 /2 8 /8 1 /4 1
1 /2 /8 1.63
1 5
2 2.9 113 /16 1
/2-20 3 1
/2 8 5
/8 13 /4 11/2 7
/16 2.05 5 /4 4 /8 2 7 /8
21/2 3.6 113 /16 1
/2-20 31/2 1
/2 8 5
/8 13 /4 11/2 7
/16 2.55 5 3 /8 43 /4 3
1
31/4 4.6 25 /16 5
/8-18 41/2 3
/4 12 3
/4 2 13 /4 9
/16 3.25 6 /4 51/2 31/2
4 5.4 25 /16 5
/8-18 5 3
/4 12 7
/8 2 13 /4 9
/16 3.82 6 5 /8 53 /4 33 /4
1 1
5 7.0 33 /16 7
/8-14 61/2 3
/4 12 7
/8 2 13 /4 13
/16 4.95 7 /8 6 /4 41/4
6 8.1 3 5 /8 1-14 71/2 1 16 1 21/4 21/4 7
/8 5.73 8 3 /8 7 3 /8 47/8
SAE straight thread ports are standard and are indicated by port number.
NPTF ports are available at no extra charge.

Table 3 — Envelope
and Mounting
Table 2—Rod Dimensions Dimensions
Thread Rod Extensions and Pilot Dimensions Add Stroke
Rod Style Style +.000
Dia. 2 1 & 3 -.002 RD
Bore MM CC KK A BØ C D LA LAF NA (Max.) RT V VF VH W WF Y ZB ZJ
3
5
/8 1
/2-20 7/16 -20 /4 1.124 3 /8 1
/2 13 /8 13 /4 9
/16 115 /16 3
/8 1
/4 1
/4 3
/16 5
/8 1 2 6 5 5 /8
11/2 7 3 1
1 /8-14 /4-16 1 /8 1.499 1/2 7
/8 21/8 21/2 15 /16 2 3 /8 3
/8 1
/2 1
/2 3
/16 1 13 /8 2 3 /8 6 3 /8 6
7 3 1 1 7 7 1 15 3 3 1 1 3 3 3 3 7
1 /8-14 /4-16 1 /8 1.499 /2 /8 1 /8 2 /2 /16 2 /8 /8 /4 /2 /16 /4 1 /8 2 /8 6 /16 6
2 5
13 /8 1
1 /4-12 1-14 1 /8 1.999 5 /8 11/8 25 /8 31/4 15 /16 2 7 /8 3
/8 3
/8 5
/8 3
/16 1 15 /8 25 /8 611/16 61/4
1
1 7
/8-14 3
/4-16 1 / 8 1.499 1
/2 7
/8 – 1
2 /2 15
/16 3
2 /8 3
/8 1
/4 1
/2 3
/16 – 3
1 /8 3
2 /8 9
6 /16 61/8
5
21/2 13 /8 1
1 /4-12 1-14 1 / 8 1.999 5
/8 1
1 /8 – 1 5
3 /4 1 /16 7
2 /8 3
/8 3
/8 5
/8 3
/16 – 5
1 /8 5 13
2 /8 6 /16 6 3
/8
5
13 /4 1 1
1 /2-12 1 /4-12 2 2.374 3
/4 1
1 /2 – 7 11 15
3 /8 1 /16 3 /32 5
/8 1
/2 1
/2 3
/16 – 7
1 /8 7
2 /8 1
7 /16 6 / 8

13 /8 11/4-12 1-14 15 /8 1.999 5

/8 1
1 /8 – 1 5
3 /4 1 /16 7
2 /8 3
/8 1
/4 5
/8 3
/16 – 5
1 /8 3 11
2 /4 7 /16 7 1
/ 8

31/4 13 /4 1 1
1 /2-12 1 /4-12 2 2.374 3 /4 11/2 – 37/8 111/16 315 /32 5
/8 3
/8 1
/2 3
/16 – 17/8 3 715 /16 73 /8
1
2 3 1
1 /4-12 1 /2-12 2 /4 2.624 7 11
/8 1 /16 – 1 15 23
4 /4 1 /16 3 /32 5
/8 3
/8 1
/2 1
/4 – 2 1
3 /8 81/16 71/2
5
13 /4 1 1
1 /2-12 1 /4-12 2 2.374 3
/4 1
1 /2 – 7 11 15
3 /8 1 /16 3 /32 5
/8 1
/4 1
/2 3
/16 – 7
1 /8 3 3
8 /16 7 /8
4 2 13 /4-12 11/2-12 21/4 2.624 7 11
/8 1 /16 – 1 15 23
4 /4 1 /16 3 /32 5
/8 1
/4 1
/2 1
/4 – 2 1
3 /8 5
8 /16 7 3
/4
21/2 21/4-12 17/8-12 3 3.124 1 1
2 /16 – 1
5 /4 2 /83 1
4 /4 5
/8 3
/8 5
/8 1
/4 – 1
2 /4 3
3 /8 9
8 /16 8
1
2 3 1
1 /4-12 1 /2-12 2 /4 2.624 7/8 111/16 – 41/4 115 /16 323 /32 5
/8 1
/4 1
/2 1
/4 – 2 31/8 91/16 81/4
1
21/2 1 7
2 /4-12 1 /8-12 3 3.124 1 1
2 /16 – 1
5 /4 2 /83 1
4 /4 5
/8 3
/8 5
/8 1
/4 – 1
2 /4 3
3 /8 5
9 /16 8 /2
5
3 23 /4-12 21/4-12 31/2 3.749 1 5
2 /8 – 3
5 /4 2 /87 7
5 /16 7
/8 3
/8 5
/16 – – 1
2 /4 3
3 /8 5
9 /16 8 1
/2
31/2 31/4-12 21/2-12 31/2 4.249 1 3 – 3 3 15
5 /4 3 /8 5 /16 15
/16 3
/8 5
/16 – – 1
2 /4 3
3 /8 5
9 /16 8 1
/2
5
21/2 21/4-12 17/8-12 3 3.124 1 1
2 /16 – 1
5 /4 2 /83 1
4 /4 5
/8 1
/4 5
/8 1
/4 – 1
2 /4 1
3 /2 10 /21
9 /8
3 1 1 5 3 7 7 7 1 5 1 1 1 5
3 2 /4-12 2 /4-12 3 /2 3.749 1 2 /8 – 5 /4 2 /8 5 /16 /8 /4 /16 – – 2 /4 3 /2 10 /2 9 /8
6 1 5
31/2 1 1
3 /4-12 2 /2-12 3 /2 4.249 1 3 – 3 3 15
5 /4 3 /8 5 /16 15
/16 1
/4 5
/16 – – 1
2 /4 1
3 /2 10 /21
9 /8
3 3 1 7 5 15 1 5 1 1 1 5
4 3 /4-12 3-12 4 4.749 1 3 /8 – 6 /4 3 /8 6 /16 /16 /4 /16 – – 2 /4 3 /2 10 /2 9 /8

Rod End Dimensions (for Bolted Gland) – See Table 2

See chart on page 32 to determine which bore, rod and mount combinations have this feature.

Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread

Small Male Intermediate Male Short Female Stub End Style 4
LAF LAF
WF Special thread,
WF
A WF A WF A extension, rod eye,
VH VH D WRENCH .125 VH
FLATS
VH blank, etc., are also
available.
B MM RD B MM RD B MM RD B MM RD To order, specify
KK 20° “Style 4” and give
KK
CC
desired dimensions
D WRENCH NA NA NA
FLATS D WRENCH C RT
for KK, A and WF.
C RT FLATS C RT
VF VF
VF RT If otherwise special,
VF
furnish dimensioned
A high strength rod end stud is supplied on thread style 1 through 2" are recommended through 2" piston rod diameters and style 2 rod ends sketch.
diameter rods. Larger sizes or special rod ends are cut threads. Style 1 are recommended on larger diameters. Use style 3 for applications where
rod ends are recommended where the workpiece is secured against the female rod end threads are required. If rod end is not specified, style 1 will
rod shoulder. When the workpiece is not shouldered, style 1 rod ends be supplied.

Atlas Cylinders
7 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
11/2" to 6" Bore Sizes Atlas Series H

Head Rectangular Maximum Pressure Rating - PSI

Flange Mount Push Application ZB + STROKE
Rod Dia Y P + STROKE
View Style REF2 Bore 5/8 1 1 3/8 1 3/4 2 W LB + STROKE
Table of 1 1/2 1400 1000 – – – UF
EE
Contents 2 – 2000 1200 – – 1
2 1/2 – 700 700 1000 –
3 1/4 – – 800 800 600
4 – – – 1000 1000
5 – – – – 850 4 2R
E MM
Rod Dia
Bore 2 1/2 3 3 1/2 4 5
4 700 – – – –
5 850 450 800 – –
6 650 650 400 400 – 3 FB F
E 4 HOLES WF G J K
TF

Head Square Maximum Pressure Rating - PSI

Flange Mount Push Application
UF
ZB + STROKE
Rod Dia Y P + STROKE
Style REF1 Bore 5/8 1 1 3/8 1 3/4 2 E
1 W LB + STROKE
1 1/2 3000 3000 – – –
2 – 3000 3000 – – EE
2 1/2 – 3000 3000 3000 –
3 1/4 – – 3000 3000 3000
4 – – – 3000 3000
5 – – – – 2500
E 4 2R MM
Rod Dia
UF TF
Bore 2 1/2 3 3 1/2 4 5
4 3000 – – – –
5 2500 1800 2300 – –
6 2000 2000 1600 1600 –
3
R F
FB
TF 8 HOLES WF G J K

Head Rectangular Mount

Style ME5 ZB + STROKE
P + STROKE
LG + STROKE
UF RT EE
1

E4 2R MM

3
E FB
4 HOLES WF G J K
TF

Rod End Dimensions (for Retainer Held Gland) – See Table 2

See chart on page 32 to determine which bore, rod and mount combinations have this feature.
Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread
Small Male Intermediate Male Short Female Stub End Style 4
LA LA
A W A W A Special thread,
D WRENCH extension, rod eye,
FLATS .125
NA NA
blank, etc., are also
available.
B MM B MM B MM B MM To order, specify
20°
KK
KK “Style 4” and give
D WRENCH CC NA desired dimensions
FLATS for KK, A and W.
D WRENCH
FLATS
C C C If otherwise special,
V V V
F G
V
F G
W F G W F G furnish dimensioned
sketch.
A high strength rod end stud is supplied on thread style 1 through 2" are recommended through 2" piston rod diameters and style 2 rod ends
diameter rods. Larger sizes or special rod ends are cut threads. Style 1 are recommended on larger diameters. Use style 3 for applications where
rod ends are recommended where the workpiece is secured against the female rod end threads are required. If rod end is not specified, style 1 will
rod shoulder. When the workpiece is not shouldered, style 1 rod ends be supplied.

Atlas Cylinders
8 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
11/2" to 6" Bore Sizes Atlas Series H

Table 1—Envelope and Mounting Dimensions

EE Add Stroke
View Bore E
NPTF SAE F FB G J K R TF UF LB LG P
Table of
Contents
3
11/2 21/2 1
/2 8 /8 7
/16 13 /4 11/2 3
/8 1.63 37/16 41/4 5 4 5 /8 2 7 /8
5
2 3 1
/2 8 /8 9
/16 13 /4 11/2 7
/16 2.05 41/8 51/8 51/4 4 5 /8 2 7 /8
1 1 5 9 3 1 7 5
2 /2 3 /2 1
/2 8 /8 /16 1 /4 1 /2 /16 2.55 4 /8 5
5 /8 3
5 /8 3
4 /4 3
3
31/4 41/2 3
/4 12 /4 11
/16 2 13 /4 9
/16 3.25 57/8 71/8 61/4 51/2 31/2
7
4 5 3
/4 12 /8 11
/16 2 13 /4 9
/16 3.82 6 3 /8 75 /8 6 5 /8 53 /4 33 /4
7
5 61/2 3
/4 12 /8 15
/16 2 13 /4 13
/16 4.95 83 /16 93 /4 71/8 61/4 41/4
1 1 1 1 7 7
6 7 /2 1 16 1 1 /16 2 /4 2 /4 /8 5.73 9 /16 1
11 /4 3
8 /8 3
7 /8 47/8
 SAE straight thread ports are standard and are indicated by port number.
NPTF ports are available at no extra charge.

Table 3—Envelope
and Mounting
Table 2—Rod Dimensions Dimensions
Thread Rod Extensions and Pilot Dimensions Add
Rod Style Style +.000 Stroke
Dia. 2 1 & 3 -.002 RD
Bore MM CC KK A BØ C D LA LAF NA (Max.) RT V VF VH W WF Y ZB
5 3
/8 1
/2-20 7/16 -20 /4 1.124 3
/8 1
/2 13 /8 13 /4 9
/16 115 /16 3
/8 1
/4 1
/4 3
/16 5
/8 1 2 6
11/2
1 7
/8-14 3
/4-16 11/8 1.499 1
/2 7
/8 21/8 21/2 15
/16 2 3 /8 3
/8 1
/2 1
/2 3
/16 1 13 /8 2 3 /8 6 3 /8
1 7
/8-14 3
/4-16 11/8 1.499 1
/2 7
/8 17/8 21/2 15
/16 2 3 /8 3
/8 1
/4 1
/2 3
/16 3
/4 13 /8 2 3 /8 67/16
2
13 /8 1
1 /4-12 1-14 15 /8 1.999 5
/8 1
1 /8 5
2 /8 1
3 /4 5
1 /16 7
2 /8 3
/8 3
/8 5
/8 3
/16 1 5
1 /8 2 /8 611/16
5

1 7
/8-14 3
/4-16 11/8 1.499 1
/2 7
/8 7
1 /8 1
2 /2 15
/16 3
2 /8 3
/8 1
/4 1
/2 3
/16 3
/4 3
1 /8 2 3 /8 69 /16
21/2 13 /8 1
1 /4-12 1-14 15 /8 1.999 5
/8 1
1 /8 5
2 /8 1
3 /4 5
1 /16 7
2 /8 3
/8 3
/8 5
/8 3
/16 1 5
1 /8 2 /8 613 /16
5

13 /4 1 1
1 /2-12 1 /4-12 2 2.374 3
/4 1
1 /2 1
3 /4 7
3 /8 11 15
1 /16 3 /32 5
/8 1
/2 1
/2 3
/16 1
1 /4 7
1 /8 2 7 /8 71/16
13 /8 11/4-12 1-14 15 /8 1.999 5
/8 1
1 /8 1
2 /2 1
3 /4 5
1 /16 7
2 /8 3
/8 1
/4 5
/8 3
/16 7
/8 5
1 /8 2 /4 711/16
3

31/4 13 /4 11/2-12 11/4-12 2 2.374 3

/4 1
1 /2 1
3 /8 7
3 /8 11 15
1 /16 3 /32 5
/8 3
/8 1
/2 3
/16 1
1 /8 7
1 /8 3 715 /16
2 13 /4-12 11/2-12 21/4 2.624 7
/8 11
1 /16 1
3 /2 1
4 /4 15 23
1 /16 3 /32 5
/8 3
/8 1
/2 1
/4 1
1 /4 2 1
3 /8 81/16
13 /4 11/2-12 11/4-12 2 2.374 3
/4 1
1 /2 3 7
3 /8 11 15
1 /16 3 /32 5
/8 1
/4 1
/2 3
/16 1 7
1 /8 3 83 /16
4 2 13 /4-12 11/2-12 21/4 2.624 7
/8 11
1 /16 3
3 /8 1
4 /4 15 23
1 /16 3 /32 5
/8 1
/4 1
/2 1
/4 1
1 /8 2 1
3 /8 85 /16
21/2 21/4-12 17/8-12 3 3.124 1 1
2 /16 3
4 /8 1
5 /4 3
2 /8 1
4 /4 5
/8 3
/8 5
/8 1
/4 3
1 /8 1
2 /4 3
3 /8 89 /16
2 13 /4-12 11/2-12 21/4 2.624 7
/8 11
1 /16 3
3 /8 1
4 /4 15 23
1 /16 3 /32 5
/8 1
/4 1
/2 1
/4 1
1 /8 2 1
3 /8 91/16
21/2 21/4-12 17/8-12 3 3.124 1 1
2 /16 3
4 /8 1
5 /4 3
2 /8 1
4 /4 5
/8 3
/8 5
/8 1
/4 3
1 /8 1
2 /4 3
3 /8 95 /16
5
3 23 /4-12 21/4-12 31/2 3.749 1 5
2 /8 7
4 /8 3
5 /4 7
2 /8 7
5 /16 7
/8 3
/8 5
/16 – 3
1 /8 1
2 /4 3
3 /8 95 /16
31/2 31/4-12 21/2-12 31/2 4.249 1 3 7
4 /8 3
5 /4 3 15
3 /8 5 /16 15
/16 3
/8 5
/16 – 3
1 /8 1
2 /4 3
3 /8 95 /16
21/2 1 7
2 /4-12 1 /8-12 3 3.124 1 1
2 /16 1
4 /4 1
5 /4 3
2 /8 1
4 /4 5
/8 1
/4 5
/8 1
/4 1
1 /4 1
2 /4 3 /2 101/2
1

3 23 /4-12 21/4-12 31/2 3.749 1 5

2 /8 3
4 /4 3
5 /4 7
2 /8 7
5 /16 7
/8 1
/4 5
/16 – 1
1 /4 1
2 /4 31/2 101/2
6
31/2 31/4-12 21/2-12 31/2 4.249 1 3 3
4 /4 3
5 /4 3 15
3 /8 5 /16 15
/16 1
/4 5
/16 – 1
1 /4 1
2 /4 31/2 101/2
3 3 1 1 7 5 15 1 5 1 1
4 3 /4-12 3-12 4 4.749 1 3 /8 5 /4 6 /4 3 /8 6 /16 /16 /4 /16 – 1 /4 2 /4 31/2 101/2

Rod End Dimensions (for Bolted Gland) – See Table 2

See chart on page 32 to determine which bore, rod and mount combinations have this feature.

Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread

Small Male Intermediate Male Short Female Stub End Style 4
LAF LAF
WF Special thread,
WF
A WF A WF A extension, rod eye,
VH VH D WRENCH .125 VH
FLATS
VH blank, etc., are also
available.
B MM RD B MM RD B MM RD B MM RD To order, specify
KK 20° “Style 4” and give
KK
CC
desired dimensions
D WRENCH NA NA NA
FLATS D WRENCH C RT
for KK, A and WF.
C RT FLATS C RT
VF VF
VF RT If otherwise special,
VF
furnish dimensioned
A high strength rod end stud is supplied on thread style 1 through 2" are recommended through 2" piston rod diameters and style 2 rod ends sketch.
diameter rods. Larger sizes or special rod ends are cut threads. Style 1 are recommended on larger diameters. Use style 3 for applications where
rod ends are recommended where the workpiece is secured against the female rod end threads are required. If rod end is not specified, style 1 will
rod shoulder. When the workpiece is not shouldered, style 1 rod ends be supplied.

Atlas Cylinders
9 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
11/2" to 6" Bore Sizes Atlas Series H

Maximum Pressure Rating - PSI

Cap Rectangular Pull Application
Flange Mount Rod Dia ZF + STROKE
View Bore 5/8 1 1 3/8 1 3/4 2 Y P + STROKE
Table of Style BEF2 1 1/2 2500 3000 – – –
WF LG + STROKE
Contents 2 – 3000 3000 – – UF
2 1/2 – 3000 3000 3000 – K EE
3 1/4 – – 3000 3000 3000
1
4 – – – 3000 3000
5 – – – – 2000
Rod Dia
Bore 2 1/2 3 3 1/2 4 5 MM R2 4E
4 3000 – – – –
5 2000 2500 3000 – –
6 1800 2000 2000 2500 –
3
RT
G J F FB E
XF + STROKE 4 HOLES TF

Cap Square Flange Mount

ZF + STROKE
Style BEF1 P + STROKE
UF
Y
E
WF LG + STROKE 1
K EE

MM R2 4E
TF UF

RT
3
G J F FB R
XF + STROKE 8 HOLES TF

Cap Rectangular Mount

Style ME6
Y P + STROKE
WF LG + STROKE UF
EE
K 1

MM R2 4E

3
RT
G J FB E
4 HOLES TF
XF + STROKE

Rod End Dimensions (for Retainer Held Gland) – See Table 2

See chart on page 32 to determine which bore, rod and mount combinations have this feature.
Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread
Small Male Intermediate Male Short Female Stub End Style 4
LA LA
A W A W A Special thread,
D WRENCH extension, rod eye,
FLATS .125
NA NA
blank, etc., are also
available.
B MM B MM B MM B MM To order, specify
20°
KK
KK “Style 4” and give
D WRENCH CC NA
desired dimensions
FLATS for KK, A and W.
D WRENCH
FLATS
C C C If otherwise special,
V V V
F G
V
F G W F G W F G
furnish dimensioned
sketch.
A high strength rod end stud is supplied on thread style 1 through 2" are recommended through 2" piston rod diameters and style 2 rod ends
diameter rods. Larger sizes or special rod ends are cut threads. Style 1 are recommended on larger diameters. Use style 3 for applications where
rod ends are recommended where the workpiece is secured against the female rod end threads are required. If rod end is not specified, style 1 will
rod shoulder. When the workpiece is not shouldered, style 1 rod ends be supplied.

Atlas Cylinders
10 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
11/2" to 6" Bore Sizes Atlas Series H

Table 1—Envelope and Mounting Dimensions

EE Add Stroke
View Bore E F FB G J K R TF UF
NPTF SAE LG P
Table of
Contents 11/2 21/2 1
/2 8 3
/8 7
/16 13 /4 11/2 3
/8 1.63 37/16 41/4 4 5 /8 2 7 /8
5
2 3 1
/2 8 /8 9
/16 13 /4 11/2 7
/16 2.05 41/8 51/8 4 5 /8 2 7 /8
1 1 5 9 3 1 7 5
2 /2 3 /2 1
/2 8 /8 /16 1 /4 1 /2 /16 2.55 4 /8 5
5 /8 3
4 /4 3
3
31/4 41/2 3
/4 12 /4 11
/16 2 13 /4 9
/16 3.25 57/8 71/8 51/2 31/2
7 11 3 9 3
4 5 3
/4 12 /8 /16 2 1 /4 /16 3.82 6 /8 5
7 /8 3
5 /4 33 /4
7
5 61/2 3
/4 12 /8 15
/16 2 13 /4 13
/16 4.95 83 /16 93 /4 61/4 41/4
1 1 1 1 7 7
6 7 /2 1 16 1 1 /16 2 /4 2 /4 /8 5.73 9 /16 1
11 /4 3
7 /8 47/8
 SAE straight thread ports are standard and are indicated by port number.
NPTF ports are available at no extra charge.

Table 3—Envelope
and Mounting
Table 2—Rod Dimensions Dimensions
Thread Rod Extensions and Pilot Dimensions Add Stroke
Rod Style Style +.000
Dia. 2 1 & 3 -.002 RD
Bore MM CC KK A BØ C D LA LAF NA (Max.) RT V VF VH W WF Y XF ZF
5 1
/8 /2-20 7/16 -20 3
/4 1.124 3
/8 1
/2 – 13 /4 9
/16 115 /16 3
/8 1
/4 1
/4 3
/16 – 1 2 5 5 /8 6
11/2
1 7
/8-14 3
/4-16 11/8 1.499 1
/2 7
/8 21/8 21/2 15
/16 2 3 /8 3
/8 1
/2 1
/2 3
/16 1 13 /8 2 3 /8 6 6 3 /8
1 7
/8-14 3
/4-16 11/8 1.499 1
/2 7
/8 – 21/2 15
/16 2 3 /8 3
/8 1
/4 1
/2 3
/16 – 13 /8 2 3 /8 6 6 5 /8
2 5
13 /8 1
1 /4-12 1-14 5
1 /8 1.999 5
/8 1
1 /8 5
2 /8 1 5
3 /4 1 /16 7
2 /8 3
/8 3
/8 5
/8 3
/16 1 1 /8 5
2 /8 1
6 /4 6 7 /8
7 3 1 1 7 1 3 3 1 1 3 3 1
1 /8-14 /4-16 1 /8 1.499 /2 /8 – 2 /2 15
/16 2 /8 /8 /4 /2 3
/16 – 1 /8 2 /8 6 /8 63 /4
5
21/2 13 /8 1
1 /4-12 1-14 5
1 /8 1.999 5
/8 1
1 /8 – 1 5
3 /4 1 /16 7
2 /8 3
/8 3
/8 5
/8 3
/16 – 1 /8 5
2 /8 3
6 /8 7
13 /4 11/2-12 11/4-12 2 2.374 3
/4 11/2 – 37/8 111/16 315 /32 5
/8 1
/2 1
/2 3
/16 – 17/8 2 7 /8 6 5 /8 71/4
13 /8 11/4-12 1-14 15 /8 1.999 5
/8 11/8 – 31/4 15 /16 2 7 /8 3
/8 1
/4 5
/8 3
/16 – 15 /8 23 /4 71/8 7 7 /8
7
31/4 13 /4 1 1
1 /2-12 1 /4-12 2 2.374 3
/4 1
1 /2 – 7 11 15
3 /8 1 /16 3 /32 5
/8 3
/8 1
/2 3
/16 – 1 /8 3 3
7 /8 81/8
3 1 1 7 11 1 23 5 3 1 1 1
2 1 /4-12 1 /2-12 2 /4 2.624 /8 1 /16 – 15
4 /4 1 /16 3 /32 /8 /8 /2 1
/4 – 2 3 /8 7 /2 81/4
7
13 /4 1 1
1 /2-12 1 /4-12 2 2.374 3
/4 1
1 /2 – 7 11 15
3 /8 1 /16 3 /32 5
/8 1
/4 1
/2 3
/16 – 1 /8 3 5
7 /8 81/2
3 1 1 7 11 1 23 5 1 1 1 3
4 2 1 /4-12 1 /2-12 2 /4 2.624 /8 1 /16 – 15
4 /4 1 /16 3 /32 /8 /4 /2 1
/4 – 2 3 /8 7 /4 8 5 /8
1
21/2 1 7
2 /4-12 1 /8-12 3 3.124 1 1
2 /16 – 1
5 /4 3
2 /8 1
4 /4 5
/8 3
/8 5
/8 1
/4 – 2 /4 3
3 /8 8 87/8
3 1 1 7 11 1 23 5 1 1 1 1
2 1 /4-12 1 /2-12 2 /4 2.624 /8 1 /16 – 15
4 /4 1 /16 3 /32 /8 /4 /2 1
/4 – 2 3 /8 8 /4 91/8
1
21/2 1 7
2 /4-12 1 /8-12 3 3.124 1 1
2 /16 – 1
5 /4 3
2 /8 1
4 /4 5
/8 3
/8 5
/8 1
/4 – 2 /4 3
3 /8 1
8 /2 9 3 /8
5 3 1 1 5 3 7 7 3 5 1 3 1
3 2 /4-12 2 /4-12 3 /2 3.749 1 2 /8 – 5 /4 7
2 /8 5 /16 /8 /8 /16 – – 2 /4 3 /8 8 /2 9 3 /8
1
31/2 1 1 1
3 /4-12 2 /2-12 3 /2 4.249 1 3 – 3
5 /4 3 15
3 /8 5 /16 15
/16 3
/8 5
/16 – – 2 /4 3
3 /8 1
8 /2 9 3 /8
1
21/2 1 7
2 /4-12 1 /8-12 3 3.124 1 1
2 /16 – 1
5 /4 3
2 /8 1
4 /4 5
/8 1
/4 5
/8 1
/4 – 2 /4 1
3 /2 9 /8 105 /8
5

3 1 1 5 3 7 7 1 5 1 1
3 2 /4-12 2 /4-12 3 /2 3.749 1 2 /8 – 5 /4 7
2 /8 5 /16 /8 /4 /16 – – 2 /4 3 /2 95 /8 105 /8
6 1
31/2 1 1 1
3 /4-12 2 /2-12 3 /2 4.249 1 3 – 3
5 /4 3 15
3 /8 5 /16 15
/16 1
/4 5
/16 – – 2 /4 1
3 /2 95 /8 105 /8
3 3 1 5 15 1 5 1 1
4 3 /4-12 3-12 4 4.749 1 3 /8 – 6 /4 7
3 /8 6 /16 /16 /4 /16 – – 2 /4 3 /2 95 /8 105 /8

Rod End Dimensions (for Bolted Gland) – See Table 2

See chart on page 32 to determine which bore, rod and mount combinations have this feature.

Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread

Small Male Intermediate Male Short Female Stub End Style 4
LAF LAF
WF Special thread,
WF
A WF A WF A extension, rod eye,
VH VH D WRENCH .125 VH
FLATS
VH blank, etc., are also
available.
B MM RD B MM RD B MM RD B MM RD To order, specify
KK 20° “Style 4” and give
KK
CC
desired dimensions
D WRENCH NA NA NA
FLATS D WRENCH C RT
for KK, A and WF.
C RT FLATS C RT
VF VF
VF RT If otherwise special,
VF
furnish dimensioned
A high strength rod end stud is supplied on thread style 1 through 2" are recommended through 2" piston rod diameters and style 2 rod ends sketch.
diameter rods. Larger sizes or special rod ends are cut threads. Style 1 are recommended on larger diameters. Use style 3 for applications where
rod ends are recommended where the workpiece is secured against the female rod end threads are required. If rod end is not specified, style 1 will
rod shoulder. When the workpiece is not shouldered, style 1 rod ends be supplied.

Atlas Cylinders
11 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
11/2" to 6" Bore Sizes Atlas Series H

Side Lug Mount

Style SL ZB + STROKE
Y P + STROKE
View WF LG + STROKE
US
Table of RT EE
Contents 1

E 4 2 MM
E/2 –.005
ST –.010

3 SB G J K
SW E SW 4 HOLES SW
SU SU SW
SW TS SW XS SS + STROKE

Style SL cylinders have mounting lugs welded to the head and its mounting bolts. If the cylinder is not well secured to the machine
cap, and are considered to be a fixed mount that does not absorb member on which it is mounted or the load is not well-guided, this
force on its centerline. The plane of the mounting surface is not turning moment results in side load applied to rod gland and piston
through the centerline of the cylinder, and for this reason Style SL bearings. To avoid this problem, Style SL cylinders should be
cylinders produce a turning moment as the cylinder applies force specified with a stroke length at least equal to the bore size.
to the load. This turning moment tends to rotate the cylinder about

Side Tap Mount

Style FS ZB + STROKE
Y P + STROKE
WF LG + STROKE
E EE
RT
1

E4 2 MM

E/2 –.005
–.010

3 G J K
TN NT THREAD, ND DEEP
4 TAPPED MTG. HOLES
XT SN + STROKE

Style FS cylinders have side tapped holes for flush mounting, and mounting bolts. If the cylinder is not well secured to the machine
are considered to be a fixed mount that does not absorb force on member on which it is mounted or the load is not well-guided, this
its centerline. The plane of the mounting surface is not through the turning moment results in side load applied to rod gland and piston
centerline of the cylinder, and for this reason Style FS cylinders bearings. To avoid this problem, Style FS cylinders should be
produce a turning moment as the cylinder applies force to the specified with a stroke length at least equal to the bore size.
load. This turning moment tends to rotate the cylinder about its

Rod End Dimensions (for Retainer Held Gland) – See Table 2

See chart on page 32 to determine which bore, rod and mount combinations have this feature.
Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread
Small Male Intermediate Male Short Female Stub End Style 4
LA LA
A W A W A Special thread,
D WRENCH extension, rod eye,
FLATS .125
NA NA
blank, etc., are also
available.
B MM B MM B MM B MM To order, specify
20°
KK
KK “Style 4” and give
D WRENCH CC NA desired dimensions
FLATS for KK, A and W.
D WRENCH
FLATS
C C C If otherwise special,
V V V
F G
V
F G
W F G W F G furnish dimensioned
sketch.
A high strength rod end stud is supplied on thread style 1 through 2" are recommended through 2" piston rod diameters and style 2 rod ends
diameter rods. Larger sizes or special rod ends are cut threads. Style 1 are recommended on larger diameters. Use style 3 for applications where
rod ends are recommended where the workpiece is secured against the female rod end threads are required. If rod end is not specified, style 1 will
rod shoulder. When the workpiece is not shouldered, style 1 rod ends be supplied.

Atlas Cylinders
12 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
11/2" to 6" Bore Sizes Atlas Series H

Table 1—Envelope and Mounting Dimensions

EE Add Stroke
View Bore E NPTF SAE F G J K NT R SB ST SU SW TN TS US LG P SN SS
Table of
Contents 1 /21 21/2 1
/2 8 3
/8 1 /43 1
1 /2 3
/8 3
/8-16 1.63 7
/16 1
/2 15
/16 3
/8 3
/4 1
3 /4 4 5
4 /8 7
2 /8 7
2 /8 37/8
7 7
2 3 1
/2 8 5
/8 1 /43 1
1 /2 7
/16 1
/2-13 2.05 9
/16 3
/4 1
1 /4 1
/2 15
/16 4 5 5
4 /8 2 /8 2 /8 3 5 /8
21/2 31/2 1
/2 8 5
/8 13 /4 11/2 7
/16 5
/8-11 2.55 13
/16 1 19 /16 11
/16 15 /16 47/8 61/4 43 /4 3 3 3 3 /8
1 1 1
3 /4 1 4 /2 3
/4 12 3
/4 2 3
1 /4 9
/16 3
/4-10 3.25 13
/16 1 9
1 /16 11
/16 1
1 /2 7
5 /8 1
7 /4 1
5 /2 3 /2 3 /2 41/8
4 5 3
/4 12 7
/8 2 13 /4 9
/16 1-8 3.82 11/16 11/4 2 7
/8 21/16 63 /4 81/2 53 /4 33 /4 33 /4 4
1 1
5 6 /2 3
/4 12 7
/8 2 3
1 /4 13
/16 1-8 4.95 1
1 /16 1
1 /4 2 7
/8 15
2 /16 1
8 /4 10 1
6 /4 4 /4 41/4 41/2
6 71/2 1 16 1 21/4 21/4 7
/8 11/4-7 5.73 15 /16 11/2 21/2 11/8 35 /16 93 /4 12 7 3 /8 47/8 51/8 51/8
 SAE straight thread ports are standard and are indicated by port number.
NPTF ports are available at no extra charge.

Table 3 —
Envelope and
Table 2—Rod Dimensions Mounting Dimensions
Thread Rod Extensions and Pilot Dimensions Add Stroke
Rod Style Style +.000
Dia. 2 1 & 3 -.002 RD
Bore MM CC KK A BØ C D LA LAF NA (Max.) RT V VF VH W WF ND XS XT Y ZB
5 3 3
1 /8 1/2-20 7/16 -20 /4 1.124 3 /8 1
/2 – 13 /4 9 /16 115 /16 3 /8 1/4 1/4 3 /16 – 1 /8 13 /8 2 2 6
1 /2
7 3 1 1 7 3
1 /8-14 /4-16 1 /8 1.499 /2 /8 2 /8 21/2 15 /16 23 /8
1 3
/8 1
/2 1
/2 3 /16 1 13 /8 /8 13 /4 2 3 /8 2 3 /8 6 3 /8
7 3 1 1 7 1 15 3 3 1 1 7
1 /8-14 /4-16 1 /8 1.499 /2 /8 – 2 /2 /16 2 /8 /8 /4 /2 3 /16 – 13 /8 /16 17/8 2 3 /8 2 3 /8 67/16
2
3 1 5 5 1 5 1 5 7 3 3 5 7
1 /8 1 /4-12 1-14 1 /8 1.999 /8 1 /8 2 /8 3 /4 1 /16 2 /8 /8 /8 /8 3 /16 1 15 /8 /16 21/8 2 5 /8 2 5 /8 611/16
7 3 1 1 7 1 15 3 3 1 1 1
1 /8-14 /4-16 1 /8 1.499 /2 /8 – 2 /2 /16 2 /8 /8 /4 /2 3 /16 – 13 /8 /2 21/16 2 3 /8 2 3 /8 69 /16
3 1 5 5 1 1 5 7 3 3 5 1
2 /2 1 /8 1 /4-12 1-14 1 /8 1.999 /8 1 /8
1 – 3 /4 1 /16 2 /8 /8 /8 /8 3 /16 – 15 /8 /2 25 /16 2 5 /8 2 5 /8 613 /16
3 1 1 3 1 7 11 15 5 1 1 1
1 /4 1 /2-12 1 /4-12 2 2.374 /4 1 /2 – 3 /8 1 /16 3 /32 /8 /2 /2 3 /16 – 17/8 /2 29 /16 2 7 /8 2 7 /8 71/16
3 1 5 5 1 1 5 7 3 1 5 11
1 /8 1 /4-12 1-14 1 /8 1.999 /8 1 /8 – 3 /4 1 /16 2 /8 /8 /4 /8 3 /16 – 15 /8 /16 25 /16 23 /4 23 /4 711/16
31/4 13 /4 11/2-12 11/4-12 2 2.374 3
/4 1
1 /2 – 7 11 15
3 /8 1 /16 3 /32 5
/8 3
/8 1
/2 3 /16 – 17/8 11
/16 29 /16 3 3 715 /16
3 1 1 7 11 1 15 23 5 3 1 11
2 1 /4-12 1 /2-12 2 /4 2.624 /8 1 /16 – 4 /4 1 /16 3 /32 /8 /8 /2 1
/4 – 2 /16 211/16 31/8 31/8 81/16
3 1 1 3 1 7 11 15 5 1 1 11
1 /4 1 /2-12 1 /4-12 2 2.374 /4 1 /2 – 3 /8 1 /16 3 /32 /8 /4 /2 3
/16 – 17/8 /16 23 /4 3 3 83 /16
4 2 13 /4-12 11/2-12 21/4 2.624 7/8 111/16 – 41/4 115 /16 323 /32 5 /8 1/4 1/2 1/4 – 2 11
/16 2 7 /8 31/8 31/8 85 /16
1 1 7 1 11
2 /2 2 /4-12 1 /8-12 3 3.124 1 2 /16 – 51/4 23 /8 41/4 5
/8 3
/8 5
/8 1
/4 – 21/4 /16 31/8 3 3 /8 3 3 /8 89 /16
3 1 1 7 11 1 15 23 5 1 1
2 1 /4-12 1 /2-12 2 /4 2.624 /8 1 /16 – 4 /4 1 /16 3 /32 /8 /4 /2 1
/4 – 2 1 2 7 /8 31/8 31/8 91/16
21/2 21/4-12 17/8-12 3 3.124 1 21/16 – 51/4 23 /8 41/4 5
/8 3
/8 5
/8 1
/4 – 21/4 1 31/8 3 3 /8 3 3 /8 95 /16
5
3 23 /4-12 21/4-12 31/2 3.749 1 2 5 /8 – 53 /4 27/8 57/16 7
/8 3
/8 5 /16 – – 21/4 1 31/8 3 3 /8 3 3 /8 95 /16
31/2 31/4-12 21/2-12 31/2 4.249 1 3 – 53 /4 33 /8 515 /16 15 /16 3 /8 5 /16 – – 21/4 1 31/8 3 3 /8 3 3 /8 95 /16
1 1 7
2 /2 2 /4-12 1 /8-12 3 3.124 1 2 /16 – 1
51/4 23 /8 41/4 5
/8 1
/4 5
/8 1
/4 – 21/4 11/4 3 3 /8 31/2 31/2 101/2
3 1 1
3 2 /4-12 2 /4-12 3 /2 3.749 1 5
2 /8 – 3 7
5 /4 2 /8 5 /167 7
/8 1
/4 5
/16 – – 21/4 11/4 3 3 /8 31/2 31/2 101/2
6
31/2 31/4-12 21/2-12 31/2 4.249 1 3 – 53 /4 33 /8 515 /16 15 /16 1/4 5 /16 – – 21/4 11/4 3 3 /8 31/2 31/2 101/2
3
4 3 /4-12 3-12 4 4.749 1 3
3 /8 – 61/4 37/8 65 /16 15 /16 1/4 5 /16 – – 21/4 11/4 3 3 /8 31/2 31/2 101/2

Rod End Dimensions (for Bolted Gland) – See Table 2

See chart on page 32 to determine which bore, rod and mount combinations have this feature.

Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread

Small Male Intermediate Male Short Female Stub End Style 4
LAF LAF
WF Special thread,
WF
A WF A WF A extension, rod eye,
VH VH D WRENCH .125 VH
FLATS
VH blank, etc., are also
available.
B MM RD B MM RD B MM RD B MM RD To order, specify
KK 20° “Style 4” and give
KK
CC
desired dimensions
D WRENCH NA NA NA
FLATS D WRENCH C RT
for KK, A and WF.
C RT FLATS C RT
VF VF
VF RT If otherwise special,
VF
furnish dimensioned
A high strength rod end stud is supplied on thread style 1 through 2" are recommended through 2" piston rod diameters and style 2 rod ends sketch.
diameter rods. Larger sizes or special rod ends are cut threads. Style 1 are recommended on larger diameters. Use style 3 for applications where
rod ends are recommended where the workpiece is secured against the female rod end threads are required. If rod end is not specified, style 1 will
rod shoulder. When the workpiece is not shouldered, style 1 rod ends be supplied.

Atlas Cylinders
13 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
11/2" to 6" Bore Sizes Atlas Series H

Cap Fixed Clevis Mount

Style PB2
View
Table of
Contents

ZC + STROKE
Y P + STROKE
WF LG + STROKE
EE CD E
RT 1

MM 2 4 E

MR
LR 3
K G J L M CB
CW CW
XC + STROKE

Rod End Dimensions (for Retainer Held Gland) – See Table 2

See chart on page 32 to determine which bore, rod and mount combinations have this feature.
Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread
Small Male Intermediate Male Short Female Stub End Style 4
LA LA
A W A W A Special thread,
D WRENCH extension, rod eye,
FLATS
NA NA
.125 blank, etc., are also
available.
B MM B MM B MM
MM
To order, specify
B
KK
KK 20° “Style 4” and give
D WRENCH CC NA desired dimensions
FLATS for KK, A and W.
D WRENCH
FLATS
C C C If otherwise special,
V V
F G
V
F G
W F G V furnish dimensioned
W F G
sketch.
A high strength rod end stud is supplied on thread style 1 through 2" are recommended through 2" piston rod diameters and style 2 rod ends
diameter rods. Larger sizes or special rod ends are cut threads. Style 1 are recommended on larger diameters. Use style 3 for applications where
rod ends are recommended where the workpiece is secured against the female rod end threads are required. If rod end is not specified, style 1 will
rod shoulder. When the workpiece is not shouldered, style 1 rod ends be supplied.

Atlas Cylinders
14 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
11/2" to 6" Bore Sizes Atlas Series H

Table 1—Envelope and Mounting Dimensions

+.000 EE Add Stroke
-.002
View Bore CB CD ؆ CW E NPTF SAE F G J K L LR M MR LG P
Table of
Contents 11/2 3 /4 .501 1/2 21/2 1
/2 8 3
/8 13 /4 11/2 3
/8 3
/4 9
/16 1
/2 5
/8 4 5 /8 2 7 /8
2 11/4 .751 5
/8 3 1
/2 8 5
/8 13 /4 11/2 7
/16 11/4 1 3
/4 15
/16 4 5 /8 2 7 /8
21/2 11/4 .751 5
/8 31/2 1
/2 8 5
/8 13 /4 11/2 7
/16 11/4 15
/16 3
/4 15
/16 43 /4 3
1 3 1
1
3 /4 1 /2 1.001 /4 4 /2 3
/4 12 3
/4 2 1 /43 9
/16 1
1 /2 1 /41
1 3
1 /16 1
5 /2 31/2
4 2 1.376 1 5 3
/4 12 7
/8 2 13 /4 9
/16 21/8 13 /4 13 /8 15 /8 53 /4 33 /4
1 1 1
5 2 /2 1.751 1 /4 6 /2 3
/4 12 7
/8 2 1 /43 13
/16 1
2 /4 2 /16 1 3
1 /4 1
2 /8 61/4 41/4
6 21/2 2.001 11/4 71/2 1 16 1 21/4 21/4 7
/8 21/2 25 /16 2 2 3 /8 73 /8 47/8
 SAE straight thread ports are standard and are indicated by port number.
NPTF ports are available at no extra charge. †Dimension CD is pin diameter.

Table 3 —
Envelope and
Table 2—Rod Dimensions Mounting Dimensions
Thread Rod Extensions and Pilot Dimensions Add Stroke
Rod Style Style +.000
Dia. 2 1 & 3 -.002 RD
Bore MM CC KK A BØ C D LA LAF NA (Max.) RT V VF VH W WF Y XC ZC
5
1
/8 1
/2-20 7/16 -20 3 /4 1.124 3 /8 1
/2 – 13 /4 9 /16 115 /16 3 /8 1
/4 1
/4 3
/16 – 1 2 6 3 /8 6 7 /8
1 /2
3 1 1 7 1 1 15 3 3 1 1 3
1 7
/8-14 /4 -16 1 / 8 1.499 / 2 / 8 2 / 8 2 / 2 / 16 2 / 8 / 8 / 2 / 2 /16 1 13 /8 2 3 /8 63 /4 71/4
3 1 1 7 1 15 3 3 1 1 3
1 7
/8-14 /4 -16 1 / 8 1.499 / 2 / 8 – 2 / 2 / 16 2 / 8 / 8 /4 / 2 /16 – 13 /8 2 3 /8 71/4 8
2
13 /8 1
1 /4-12 1-14 15
/ 8 1.999 5
/ 8 11
/ 8 2 5
/ 8 3 1
/4 1 5
/16 2 7
/ 8
3
/ 8
3
/ 8
5
/ 8
3
/16 1 15 /8 2 5 /8 71/2 81/4
3 1 1 7 1 15 3 3 1 1 3
1 7
/8-14 /4 -16 1 / 8 1.499 / 2 / 8 – 2 / 2 / 16 2 / 8 / 8 /4 / 2 /16 – 13 /8 2 3 /8 7 3 /8 81/8
21/2 13 /8 1
1 /4-12 1-14 15
/ 8 1.999 5
/ 8 11
/ 8 – 3 1
/4 1 5
/16 2 7
/ 8
3
/ 8
3
/ 8
5
/ 8
3
/16 – 15 /8 2 5 /8 75 /8 8 3 /8
13 /4 1
1 /2-12 11
/ 4 -12 2 2.374 3
/ 4 11
/ 2 – 3 7
/ 8 111
/ 16 3 15
/ 32
5
/ 8
1
/ 2
1
/ 2
3
/16 – 17/8 2 7 /8 7 7 /8 8 5 /8
13 /8 1
1 /4-12 1-14 15
/ 8 1.999 5
/ 8 11
/ 8 – 3 1
/4 1 5
/16 2 7
/ 8
3
/ 8
1
/4
5
/ 8
3
/16 – 15 /8 23 /4 8 5 /8 9 5 /8
31/4 13 /4 1
1 /2-12 11
/ 4 -12 2 2.374 3
/ 4 11
/ 2 – 3 7
/ 8 111
/ 16 3 15
/ 32
5
/ 8
3
/ 8
1
/ 2
3
/16 – 17/8 3 87/8 97 /8
3 1 1 7 11 1 15 23 5 3 1 1
2 1 /4-12 1 / 2 -12 2 / 4 2.624 / 8 1 / 16 – 4 / 4 1 /16 3 / 32 / 8 / 8 / 2 /4 – 2 31/8 9 10
13 /4 1
1 /2-12 11
/ 4 -12 2 2.374 3
/ 4 11
/ 2 – 3 7
/ 8 111
/ 16 3 15
/ 32
5
/ 8
1
/4
1
/ 2
3
/16 – 17/8 3 93 /4 111/8
1 1 7 11 1 15 23 5 1 1 1
4 2 3
1 /4-12 1 / 2 -12 2 / 4 2.624 / 8 1 / 16 – 4 / 4 1 /16 3 / 32 / 8 /4 / 2 /4 – 2 31/8 97 /8 111/4
21/2 1
2 /4-12 17
/ 8 -12 3 3.124 1 2 1
/16 – 51
/ 4 2 3
/ 8 4 1
/4
5
/ 8
3
/ 8
5
/ 8
1
/4 – 21/4 3 3 /8 101/8 111/2
1 1 7 11 1 15 23 5 1 1 1
2 3
1 /4-12 1 / 2 -12 2 / 4 2.624 / 8 1 / 16 – 4 / 4 1 /16 3 / 32 / 8 /4 / 2 /4 – 2 31/8 101/2 121/4
21/2 1
2 /4-12 17
/ 8 -12 3 3.124 1 2 1
/16 – 51
/ 4 2 3
/ 8 4 1
/4
5
/ 8
3
/ 8
5
/ 8
1
/4 – 21/4 3 3 /8 103 /4 121/2
5 3 3
21
-12 31
3.749 1 2 5
– 5 3
2 7
5 7 7 3 5
– 21/4 103 /4 121/2
2 /4-12 /4 / 2 / 8 / 4 / 8 /16 / 8 / 8 /16 – 3 3 /8
31/2 31/4-12 21/2-12 31/2 4.249 1 3 – 53 /4 33 /8 515 /16 15 /16 3 /8 5 /16 – – 21/4 3 3 /8 103 /4 121/2
21/2 1
2 /4-12 17
/ 8 -12 3 3.124 1 2 1
/16 – 51
/ 4 2 3
/ 8 4 1
/4
5
/ 8
1
/4
5
/ 8
1
/4 – 21/4 31/2 121/8 141/8
1 1 5 3 7 7 7 1 5
3 3
2 /4-12 2 /4 -12 3 / 2 3.749 1 2 / 8 – 5 / 4 2 / 8 5 /16 / 8 /4 /16 – – 21/4 31/2 121/8 141/8
6
31/2 31/4-12 21/2-12 31/2 4.249 1 3 – 53 /4 33 /8 515 /16 15 /16 1/4 5 /16 – – 21/4 31/2 121/8 141/8
3 1 7 5 15 1 5
4 3
3 /4-12 3-12 4 4.749 1 3 / 8 – 6 /4 3 / 8 6 / 16 / 16 /4 /16 – – 21/4 31/2 121/8 141/8

Rod End Dimensions (for Bolted Gland) – See Table 2

See chart on page 32 to determine which bore, rod and mount combinations have this feature.

Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread

Small Male Intermediate Male Short Female Stub End Style 4
LAF LAF
WF Special thread,
WF
A WF A WF A extension, rod eye,
VH VH D WRENCH .125 VH
FLATS
VH blank, etc., are also
available.
B MM RD B MM RD B MM RD B MM RD To order, specify
KK 20° “Style 4” and give
KK
CC
desired dimensions
D WRENCH NA NA NA
FLATS D WRENCH C RT
for KK, A and WF.
C RT FLATS C RT
VF VF
VF RT If otherwise special,
VF
furnish dimensioned
A high strength rod end stud is supplied on thread style 1 through 2" are recommended through 2" piston rod diameters and style 2 rod ends sketch.
diameter rods. Larger sizes or special rod ends are cut threads. Style 1 are recommended on larger diameters. Use style 3 for applications where
rod ends are recommended where the workpiece is secured against the female rod end threads are required. If rod end is not specified, style 1 will
rod shoulder. When the workpiece is not shouldered, style 1 rod ends be supplied.

Atlas Cylinders
15 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
11/2" to 6" Bore Sizes Atlas Series H

Head Trunnion Mount

Style TM1
ZB + STROKE
View Y P + STROKE
Table of WF LG + STROKE
UT
Contents RT
1 EE

1/8 R

E4 2 TD MM

3 K G J K
TL E TL XG

Cap Trunnion Mount

Style TM2 ZB + STROKE
Y P + STROKE
UT WF LG + STROKE
RT EE
1
1/8 R

E 4 2 TD MM

3
K G J K
TL E TL XJ + STROKE

Intermediate Trunnion Mount

ZB + STROKE
Style TM3 Y P + STROKE
WF LG + STROKE
EE
UM RT
1 BD

1/8 R

UW E4 2 MM

TD

K G
3 J K
XI
E
TL TM TL
 Dimension XI to be specified by customer.

Rod End Dimensions (for Retainer Held Gland) – See Table 2

See chart on page 32 to determine which bore, rod and mount combinations have this feature.
Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread
Small Male Intermediate Male Short Female Stub End Style 4
LA LA
A W A W A Special thread,
D WRENCH extension, rod eye,
FLATS .125
NA NA
blank, etc., are also
available.
B MM B MM B MM B MM To order, specify
20°
KK
KK “Style 4” and give
D WRENCH CC NA
desired dimensions
FLATS for KK, A and W.
D WRENCH
FLATS
C C C If otherwise special,
V V V
F G
V
F G W F G W F G furnish dimensioned
sketch.
A high strength rod end stud is supplied on thread style 1 through 2" are recommended through 2" piston rod diameters and style 2 rod ends
diameter rods. Larger sizes or special rod ends are cut threads. Style 1 are recommended on larger diameters. Use style 3 for applications where
rod ends are recommended where the workpiece is secured against the female rod end threads are required. If rod end is not specified, style 1 will
rod shoulder. When the workpiece is not shouldered, style 1 rod ends be supplied.

Atlas Cylinders
16 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
11/2" to 6" Bore Sizes Atlas Series H

Table 1—Envelope and Mounting Dimensions

EE +.000 Add Stroke Style TM3
View -.001 Minimum
Table of Bore BD E NPTF SAE F G J K TD Ø TL TM UM UT UW LG P Stroke
Contents 11/2 11/4 21/2 1
/2 8 3
/8 13 /4 11/2 3
/8 1.000 1 3 5 41/2 33 /8 4 5 /8 2 7 /8 0
2 11/2 3 1
/2 8 5
/8 13 /4 11/2 7
/16 1.375 13 /8 31/2 61/4 53 /4 41/8 4 5 /8 2 7 /8 1
/4
1 1 1 5 1 7 3 1 5 3 1
2 /2 1
1 /2 3 /2 /2 8 /8 3
1 /4 1 /2 /16 1.375 1 /8 3
4 6 /4 6 /4 4 /8 4 /4 3 /8

31/4 2 41/2 3
/4 12 3
/4 2 13 /4 9
/16 1.750 13 /4 5 81/2 8 513 /16 51/2 31/2 3
/8
3 7 3 9 1 3 3 1
4 2 5 /4 12 /8 2 1 /4 /16 1.750 1 /4 3
5 /21
9 8 /2 6 /8 5 /4 3 /43
/8

5 2 61/2 3
/4 12 7
/8 2 13 /4 13
/16 1.750 13 /4 7 101/2 10 73 /4 61/4 41/4 0
6 3 71/2 1 16 1 21/4 21/4 7
/8 2.000 2 81/2 121/2 111/2 103 /8 7 3 /8 47/8 1
/4
 SAE straight thread ports are standard and are indicated by port number.
NPTF ports are available at no extra charge.

Table 3 —
Envelope and
Table 2—Rod Dimensions Mounting Dimensions
Thread Rod Extensions and Pilot Dimensions Add Stroke
Rod Style Style +.000
Dia. 2 1 & 3 -.002 RD Min.
Bore MM CC KK A BØ C D LA LAF NA (Max.) RT V VF VH W WF XG XI  Y XJ ZB
5
/8 1
/2-20 7/16 -20 3 /4 1.124 3 /8 1
/2 – 13 /4 9 /16 115 /16 3
/8 1
/4 1/4 3 /16 – 1 17/8 37/16 2 47/8 6
11/2
1 7
/8-14 3 /4-16 11/8 1
1.499 /2 7
/8 1 1
2 /8 2 /2 15
/16 3
2 /8 3
/8 1
/2 1/2 3 /16 1 13 /8 21/4 313 /16 2 3 /8 51/4 6 3 /8
1 7
/8-14 3 /4-16 11/8 1
1.499 /2 7
/8 – 1
2 /2 15
/16 3
2 /8 3
/8 1
/4 1/2 3 /16 – 13 /8 21/4 315 /16 2 3 /8 51/4 67/16
2
1 /8 1 /4-12 1-14 15 /8
3 1 5 1 5 1
1.999 /8 1 /8 2 /8 3 /4 1 /16 5 7
2 /8 3
/8 3
/8 5 /8 3 /16 1 15 /8 21/2 43 /16 2 5 /8 51/2 611/16
1 7
/8-14 3 /4-16 11/8 1
1.499 /2 7
/8 – 1
2 /2 15
/16 3
2 /8 3
/8 1
/4 1/2 3 /16 – 13 /8 21/4 315 /16 2 3 /8 5 3 /8 69 /16
1
2 /2 1 /8 1 /4-12 1-14 15 /8
3 1 5
1.999 /8 1 /81
– 1 5
3 /4 1 /16 7
2 /8 3
/8 3
/8 5 /8 3 /16 – 15 /8 21/2 43 /16 2 5 /8 5 5 /8 613 /16
13 /4 11/2-12 11/4-12 2 3
2.374 /4 1 /21
– 7 11 15
3 /8 1 /16 3 /32 5
/8 1
/2 1/2 3 /16 – 17/8 23 /4 47/16 2 7 /8 57/8 71/16
13 /8 11/4-12 1-14 15 /8 5
1.999 /8 1 /81
– 1 5
3 /4 1 /16 7
2 /8 3
/8 1
/4 5 /8 3 /16 – 15 /8 2 5 /8 411/16 23 /4 61/4 711/16
1
3 /4 13 /4 11/2-12 11/4-12 2 3
2.374 /4 1 /21
– 7 11 15
3 /8 1 /16 3 /32 5
/8 3
/8 1/2 3 /16 – 17/8 2 7 /8 415 /16 3 61/2 715 /16
2 13 /4-12 11/2-12 21/4 7 11
2.624 /8 1 /16 – 1 15 23
4 /4 1 /16 3 /32 5
/8 3
/8 1 /2 1
/4 – 2 3 51/16 31/8 5 5 /8 81/16
13 /4 11/2-12 11/4-12 2 3
2.374 /4 1 /21
– 7 11 15
3 /8 1 /16 3 /32 5
/8 1
/4 1
/2 3
/16 – 17/8 2 7 /8 415 /16 3 63 /4 83 /16
4 2 13 /4-12 11/2-12 21/4 2.624 7/8 111/16 – 41/4 115 /16 323 /32 5 /8 1/4 1/2 1/4 – 2 3 51/16 31/8 6 7 /8 85 /16
21/2 21/4-12 17/8-12 3 1
3.124 1 2 /16 – 51/4 23 /8 41/4 5
/8 3
/8 5 /8 1
/4 – 21/4 31/4 55 /16 3 3 /8 71/8 89 /16
2 13 /4-12 11/2-12 21/4 7 11
2.624 /8 1 /16 – 1 15 23
4 /4 1 /16 3 /32 5
/8 1
/4 1
/2 1
/4 – 2 3 51/16 31/8 7 3 /8 91/16
21/2 21/4-12 17/8-12 3 3.124 1 21/16 – 51/4 23 /8 41/4 5
/8 3
/8 5 /8 1
/4 – 21/4 31/4 55 /16 3 3 /8 75 /8 95 /16
5
3 23 /4-12 21/4-12 31/2 3.749 1 2 5 /8 – 53 /4 27/8 57/16 7
/8 3
/8 5 /16 – – 21/4 31/4 55 /16 3 3 /8 75 /8 95 /16
31/2 31/4-12 21/2-12 31/2 4.249 1 3 – 53 /4 33 /8 515 /16 15 /16 3 /8 5 /16 – – 21/4 31/4 55 /16 3 3 /8 75 /8 95 /16
21/2 21/4-12 17/8-12 3 1
3.124 1 2 /16 – 51/4 23 /8 41/4 5
/8 1
/4 5 /8 1
/4 – 21/4 3 3 /8 61/16 31/2 8 3 /8 101/2
3 23 /4-12 21/4-12 31/2 3.749 1 5
2 /8 – 3
5 /4 2 /87 7
5 /16 7
/8 1
/4 5
/16 – – 21/4 3 3 /8 61/16 31/2 8 3 /8 101/2
6
31/2 31/4-12 21/2-12 31/2 4.249 1 3 – 53 /4 33 /8 515 /16 15 /16 1/4 5 /16 – – 21/4 3 3 /8 61/16 31/2 8 3 /8 101/2
4 33 /4-12 3-12 4 4.749 1 3
3 /8 – 61/4 37/8 65 /16 15 /16 1/4 5 /16 – – 21/4 3 3 /8 61/16 31/2 8 3 /8 101/2
 Dimension XI to be specified by customer.

Rod End Dimensions (for Bolted Gland) – See Table 2

See chart on page 32 to determine which bore, rod and mount combinations have this feature.

Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread

Small Male Intermediate Male Short Female Stub End Style 4
LAF LAF
WF Special thread,
WF
A WF A WF A extension, rod eye,
VH VH D WRENCH .125 VH
FLATS
VH blank, etc., are also
available.
B MM RD B MM RD B MM RD B MM RD To order, specify
KK 20° “Style 4” and give
KK
CC
desired dimensions
D WRENCH NA NA NA
FLATS D WRENCH C RT
for KK, A and WF.
C RT FLATS C RT
VF VF
VF RT If otherwise special,
VF
furnish dimensioned
A high strength rod end stud is supplied on thread style 1 through 2" are recommended through 2" piston rod diameters and style 2 rod ends sketch.
diameter rods. Larger sizes or special rod ends are cut threads. Style 1 are recommended on larger diameters. Use style 3 for applications where
rod ends are recommended where the workpiece is secured against the female rod end threads are required. If rod end is not specified, style 1 will
rod shoulder. When the workpiece is not shouldered, style 1 rod ends be supplied.

Atlas Cylinders
17 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Notes Atlas Series H

NOTES
View
Table of
Contents

Atlas Cylinders
18 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Features / Specifications Atlas Series H

View
Series H
Table of
Contents
7" and 8" Bore
Heavy Duty High Pressure
Hydraulic Cylinders
• Bolted gland for ease of maintenance. • Floating cushions with float-check action and positive
• Hi-Load piston is standard. metal-to-metal seal.
• Cylinder tube seal groove design and high-strength Every cylinder is individually tested before it leaves our
tie rods ensure trouble-free performance even in plant.
severe applications.

Adjustable, floating, End seal design

SAE Ports are standard. stepped cushions. prevents extrusion.

Spanner wrench holes on

5" dia. and larger piston
rods for easy installation.

Bolted gland simplifies

maintenance.

Optional Piston
Hi-Load piston is standard — with
rugged filled PTFE seals and
bearings.

Case hardened chrome

Cast iron ring piston is plated piston rod. High strength alloy tie rods made
available as a special from 125,000 psi minimum yield
modification.
strength material.

Standard Specifications
• Heavy Duty Service — ANSI (NFPA) T3.6.7R3-2009 • Mounting Styles — 15 standard styles at various
specifications and mounting dimension standards application ratings
• Standard Construction — Square Head – • Strokes — Available in any practical stroke length
Tie Rod Design • Cushions — Optional at either end or both ends
• Nominal Pressure — 3000 PSI* of stroke
• Standard Fluid — Hydraulic Oil • Rod Ends — Four Standard Choices — specials
• Standard Temperature — -10° F. to +165° F. to order
• Piston Rod Diameter — 3" through 51/2"
*If hydraulic operating pressure exceeds 3000 PSI, send application data for engineering evaluation and recommendation.
In line with our policy of continuing product improvement, specifications in this catalog are subject to change.

Atlas Cylinders
19 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
7" and 8" Bore Sizes Atlas Series H

Tie Rods Extended Head End Mount ZB + STROKE

Y P + STROKE
Style NM3
ZJ + STROKE
View EE
E
Table of DD
1 K
Contents

E 4 2 R MM

AA

3 RT
G J K
R WF LG + STROKE
BB

Tie Rods Extended Cap End Mount

ZB + STROKE
Style NM2 Y P + STROKE
ZJ + STROKE
E EE
DD
1 K

E 4 2 R MM

AA

3 RT
G J K
R WF LG + STROKE
BB

Tie Rods Extended Both Ends Mount

ZB + STROKE
Style NM1 Y P + STROKE
ZJ + STROKE
E EE
DD
1 K

E 4 2 R MM

AA

3 RT J K
G
R WF LG + STROKE BB
BB

Rod End Dimensions — see Table 2

Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread
Small Male Intermediate Male Short Female Stub End Style 4
Special thread,
extension, rod eye,
WF
VF VF blank, etc., are also
.125
available.
To order, specify
20° MM B RD “Style 4” and give
desired dimensions
for KK, A and WF.
RT
If otherwise special,
furnish dimensioned
sketch.
Over 2" rod sizes or special rod ends are cut threads. Style 1 rod ends where female rod end threads are required. If rod end is not specified,
are recommended where the workpiece is secured against the rod style 1 will be supplied. On 5" rods and above, (4) .515 dia. spanner
shoulder. When the workpiece is not shouldered, style 2 rod ends are wrench holes will be provided instead of wrench flats.
recommended over 2" piston rod diameters. Use style 3 for applications

Atlas Cylinders
20 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
7" and 8" Bore Sizes Atlas Series H

Table 1—Envelope and Mounting Dimensions

EE Add Stroke
View
Table of Bore AA BB DD E NPTF SAE G J K R LG P
Contents 7 9.3 41/8 11/8-12 81/2 11/4 20 23 /4 23 /4 11/4 6.58 81/2 55/8
8 10.6 41/2 11/4-12 91/2 11/2 24 3 3 11/2 7.50 91/2 63/8
 SAE straight thread ports are standard and are indicated by port number.
NPTF ports are available at no extra charge.

Table 3 —
Envelope and
Mounting
Table 2—Rod Dimensions Dimensions
Thread Rod Extensions and Pilot Dimensions Add Stroke
Rod Style Style +.000
Dia. 2 1 & 3 -.002 RD
Bore MM CC KK A BØ C D LAF NA (Max.) RT VF WF Y ZB ZJ
3 23 /4-12 21/4-12 31/2 3.749 1 2 5 /8 53 /4 2 7 /8 57/16 7
/8 5
/16 21/4 311/16 12 103 /4
5 43 /4-12 31/2-12 5 5.749 1 – 71/4 47/8 77/16 15
/16 5
/16 21/4 311/16 12 103 /4
7
31/2 31/4-12 1
2 /2-12 1
3 /2 4.249 1 3 3
5 /4 3
3 /8 15
5 /16 15
/16 5
/16 1 11
2 /4 3 /16 12 103 /4
4 33 /4-12 3-12 4 4.749 1 3
3 /8 1
6 /4 7
3 /8 5
6 /16 15
/16 5
/16 1 11
2 /4 3 /16 12 103 /4
31/2 31/4-12 1
2 /2-12 1
3 /2 4.249 1 3 3
5 /4 3
3 /8 15
5 /16 15
/16 5
/16 2 /4 3 /16 13 /4 113 /4
1 13 1

51/2 51/4-12 4-12 1

5 /2 6.249 1 – 3
7 /4 3
5 /8 15
7 /16 15
/16 5
/16 21/4 313/16 131/4 113 /4
8
4 33 /4-12 3-12 4 4.749 1 3
3 /8 1
6 /4 7
3 /8 5
6 /16 15
/16 5
/16 21/4 313/16 131/4 113 /4
5 43 /4-12 1
3 /2-12 5 5.749 1 – 1
7 /4 7
4 /8 7
7 /16 15
/16 5
/16 21/4 313/16 131/4 113 /4

Atlas Cylinders
21 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
7" and 8" Bore Sizes Atlas Series H

Head Rectangular
Flange Mount ZB + STROKE
Maximum Pressure Rating - PSI Y P + STROKE
View Style REF2 Push Application UF WF EE
Table of Rod Dia 1 W
Contents Bore 3 3 1/2 4 5 5 1/2
7 1000 800 400 400 –
8 – 800 700 400 400

E 4 2R MM

3 J K
FB F G
E LB + STROKE
4 HOLES
TF

For pressures exceeding those shown use Style REF1 or Style ME5.

Head Square Flange Mount

ZB + STROKE
Style REF1 Maximum Pressure Rating - PSI
UF Y P + STROKE
Push Application E WF
Rod Dia 1 W
Bore 3 3 1/2 4 5 5 1/2 EE
7 2500 2200 1500 1500 –
8 – 2000 2000 1400 1400

UF E 4 2 R TF MM

J K
3 F G
R FB
8 HOLES LB + STROKE
TF

Head Rectangular Mount

Style ME5 ZB + STROKE
Y P + STROKE
UF EE
1 WF

E 4 2R MM

3 J K
E FB RT G
4 HOLES LG + STROKE
TF

Rod End Dimensions — see Table 2

Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread
Small Male Intermediate Male Short Female Stub End Style 4
Special thread,
extension, rod eye,
WF
VF VF blank, etc., are also
.125
available.
To order, specify
20° MM B RD “Style 4” and give
desired dimensions
for KK, A and WF.
RT
If otherwise special,
furnish dimensioned
sketch.
Over 2" rod sizes or special rod ends are cut threads. Style 1 rod ends where female rod end threads are required. If rod end is not specified,
are recommended where the workpiece is secured against the rod style 1 will be supplied. On 5" rods and above, (4) .515 dia. spanner
shoulder. When the workpiece is not shouldered, style 2 rod ends are wrench holes will be provided instead of wrench flats.
recommended over 2" piston rod diameters. Use style 3 for applications

Atlas Cylinders
22 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
7" and 8" Bore Sizes Atlas Series H

Table 1—Envelope and Mounting Dimensions

EE Add Stroke

View NPTF SAE LB LG P
Bore E F FB G J K R TF UF
Table of
Contents 7 81/2 1
1 /4 20 1 13 /16 23 /4 23 /4 11/4 6.58 105 /8 125 /8 91/2 1
8 /2 55/8
8 91/2 11/2 24 1 15 /16 3 3 11/2 7.50 1113 /16 14 101/2 91/2 63/8
 SAE straight thread ports are standard and are indicated by port number.
NPTF ports are available at no extra charge.

Table 3 —
Envelope and
Mounting
Table 2—Rod Dimensions Dimensions
Thread Rod Extensions and Pilot Dimensions Add
Stroke
Rod Style Style +.000
Dia. 2 1 & 3 -.002 RD
Bore MM CC KK A BØ C D LAF NA (Max.) RT VF W WF Y ZB
3 23 /4-12 21/4-12 31/2 3.749 1 2 5 /8 53 /4 2 7 /8 57/16 7
/8 5
/16 11/4 21/4 311/16 12
5 43 /4-12 31/2-12 5 5.749 1 – 71/4 47/8 77/16 15
/16 5
/16 11/4 21/4 311/16 12
7
31/2 31/4-12 21/2-12 31/2 4.249 1 3 53 /4 3 3 /8 515 /16 15
/16 5
/16 11/4 21/4 311/16 12
4 33 /4-12 3-12 4 4.749 1 3 3 /8 61/4 37/8 65 /16 15
/16 5
/16 11/4 21/4 311/16 12
31/2 31/4-12 21/2-12 31/2 4.249 1 3 53 /4 3 3 /8 515 /16 15
/16 5
/16 11/4 21/4 313/16 131/4
51/2 51/4-12 4-12 51/2 6.249 1 – 73 /4 5 3 /8 715 /16 15
/16 5
/16 11/4 21/4 313/16 131/4
8
4 33 /4-12 3-12 4 4.749 1 3 3 /8 61/4 37/8 65 /16 15
/16 5
/16 11/4 21/4 313/16 131/4
5 43 /4-12 31/2-12 5 5.749 1 – 71/4 47/8 77/16 15
/16 5
/16 11/4 21/4 313/16 131/4

Atlas Cylinders
23 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
7" and 8" Bore Sizes Atlas Series H

Cap Rectangular
ZF + STROKE
Flange Mount Maximum Pressure Rating - PSI Y P + STROKE
View Style BEF2 Pull Application XF + STROKE
Rod Dia
Table of EE UF
Bore 3 3 1/2 4 5 5 1/2
Contents 7 2000 2000 2500 3000 –
1

8 – 1700 1700 2200 2500

MM R 2 4 E

K 3
RT G J FB
F E 4 HOLES
WF LG + STROKE
TF
For pressures exceeding those shown use Style BEF1 or Style ME6.

Cap Square Flange Mount

Style BEF1 Y
ZF + STROKE
P + STROKE
UF
E
XF + STROKE 1
EE

MM TF R 2 4 E UF

RT G
J F 3
LG + STROKE R FB
WF 8 HOLES
TF

Cap Rectangular Mount

Style ME6 XF + STROKE
Y P + STROKE
EE UF
1

MM E 2 4 R

K G J 3
E FB
RT LG + STROKE 4 HOLES
TF
WF

Rod End Dimensions — see Table 2

Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread
Small Male Intermediate Male Short Female Stub End Style 4
Special thread,
extension, rod eye,
WF
VF VF blank, etc., are also
.125
available.
To order, specify
20° MM B RD “Style 4” and give
desired dimensions
for KK, A and WF.
RT
If otherwise special,
furnish dimensioned
sketch.
Over 2" rod sizes or special rod ends are cut threads. Style 1 rod ends where female rod end threads are required. If rod end is not specified,
are recommended where the workpiece is secured against the rod style 1 will be supplied. On 5" rods and above, (4) .515 dia. spanner
shoulder. When the workpiece is not shouldered, style 2 rod ends are wrench holes will be provided instead of wrench flats.
recommended over 2" piston rod diameters. Use style 3 for applications

Atlas Cylinders
24 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
7" and 8" Bore Sizes Atlas Series H

Table 1—Envelope and Mounting Dimensions

EE Add Stroke
View
Bore E NPTF SAE F FB G J K R TF UF LG P
Table of
Contents 7 81/2 11/4 20 1 13 /16 23 /4 23 /4 11/4 6.58 105 /8 125 /8 81/2 55/8
8 91/2 11/2 24 1 15 /16 3 3 11/2 7.50 1113 /16 14 91/2 63/8
 SAE straight thread ports are standard and are indicated by port number.
NPTF ports are available at no extra charge.

Table 3 —
Envelope and
Mounting
Table 2—Rod Dimensions Dimensions
Thread Rod Extensions and Pilot Dimensions Add Stroke
Rod Style Style +.000
Bore Dia. 2 1 & 3 -.002 RD
MM CC KK A BØ C D LAF NA (Max.) RT VF WF Y XF ZF
3 23 /4-12 21/4-12 31/2 3.749 1 2 5 /8 53 /4 2 7 /8 57/16 7
/8 5
/16 21/4 311/16 103 /4 113 /4
5 43 /4-12 31/2-12 5 5.749 1 – 71/4 47/8 77/16 15 /16 5 /16 21/4 311/16 103 /4 113 /4
7
31/2 31/4-12 21/2-12 31/2 4.249 1 3 53 /4 3 3 /8 515 /16 15 /16 5 /16 21/4 311/16 103 /4 113 /4
4 33 /4-12 3-12 4 4.749 1 3 3 /8 61/4 37/8 65 /16 15 /16 5 /16 21/4 311/16 103 /4 113 /4
31/2 31/4-12 21/2-12 31/2 4.249 1 3 53 /4 3 3 /8 515 /16 15 /16 5 /16 21/4 313/16 113 /4 123 /4
51/2 51/4-12 4-12 51/2 6.249 1 – 73 /4 5 3 /8 715 /16 15 /16 5 /16 21/4 313/16 113 /4 123 /4
8
4 33 /4-12 3-12 4 4.749 1 3 3 /8 61/4 37/8 65 /16 15 /16 5 /16 21/4 313/16 113 /4 123 /4
5 43 /4-12 31/2-12 5 5.749 1 – 71/4 47/8 77/16 15 /16 5 /16 21/4 313/16 113 /4 123 /4

Atlas Cylinders
25 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
7" and 8" Bore Sizes Atlas Series H

Side Lug Mount

Style SL ZB + STROKE

View Y P + STROKE
Table of US WF LG + STROKE
Contents EE
1 K

E 4 2 MM
-.005
E/2 -.010
ST

3
SB RT G J K
SW E SW 4 HOLES SW SU SU SW
SW TS SW XS SS + STROKE

Style SL cylinders have mounting lugs welded to the head and about its mounting bolts. If the cylinder is not well secured to
cap, and are considered to be a fixed mount that does not absorb the machine member on which it is mounted or the load is not
force on its centerline. The plane of the mounting surface is not well-guided, this turning moment results in side load applied to
through the centerline of the cylinder, and for this reason Style rod gland and piston bearings. To avoid this problem, Style SL
SL cylinders produce a turning moment as the cylinder applies cylinders should be specified with a stroke length at least
force to the load. This turning moment tends to rotate the cylinder equal to the bore size.

Side Tap Mount

Style FS ZB + STROKE
Y P + STROKE
WF LG + STROKE
E EE
1 K

E 4 2 MM

-.005
E/2 -.010

3
RT G J K
TN NT THREAD, ND DEEP
4 TAPPED MTG. HOLES
XT SN + STROKE

Style FS cylinders have side tapped holes for flush mounting, and mounting bolts. If the cylinder is not well secured to the machine
are considered to be a fixed mount that does not absorb force on member on which it is mounted or the load is not well-guided,
its centerline. The plane of the mounting surface is not through the this turning moment results in side load applied to rod gland and
centerline of the cylinder, and for this reason Style FS cylinders piston bearings. To avoid this problem, Style FS cylinders
produce a turning moment as the cylinder applies force to the should be specified with a stroke length at least equal to the
load. This turning moment tends to rotate the cylinder about its bore size.

Rod End Dimensions — see Table 2

Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread
Small Male Intermediate Male Short Female Stub End Style 4
Special thread,
extension, rod eye,
WF
VF VF blank, etc., are also
.125
available.
To order, specify
20° MM B RD “Style 4” and give
desired dimensions
for KK, A and WF.
RT
If otherwise special,
furnish dimensioned
sketch.
Over 2" rod sizes or special rod ends are cut threads. Style 1 rod ends where female rod end threads are required. If rod end is not specified,
are recommended where the workpiece is secured against the rod style 1 will be supplied. On 5" rods and above, (4) .515 dia. spanner
shoulder. When the workpiece is not shouldered, style 2 rod ends are wrench holes will be provided instead of wrench flats.
recommended over 2" piston rod diameters. Use style 3 for applications

Atlas Cylinders
26 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
7" and 8" Bore Sizes Atlas Series H

Table 1—Envelope and Mounting Dimensions

EE Add Stroke
View
Table of Bore NPTF
E SAE G J K NT SB ST SU SW TN TS US LG P SN SS
Contents 7 81/2 11/4 20 23 /4 23 /4 11/4 11/2-6 19 /16 13 /4 2 7 /8 13 /8 33 /4 111/4 14 81/2 55/8 57/8 53 /4
8 91/2 11/2 24 3 3 11/2 11/2-6 19 /16 13 /4 2 7 /8 13 /8 41/4 121/4 15 91/2 63/8 6 5 /8 63 /4

 SAE straight thread ports are standard and are indicated by port number.
NPTF ports are available at no extra charge.

Table 3 —
Envelope and
Mounting
Table 2—Rod Dimensions Dimensions
Thread Rod Extensions and Pilot Dimensions Add
Stroke
Rod Style Style +.000
Dia. 2 1 & 3 -.002 RD
Bore MM CC KK A BØ C D LAF NA (Max.) RT VF WF ND XS XT Y ZB
3 23 /4-12 21/4-12 31/2 3.749 1 2 5 /8 53 /4 2 7 /8 57/16 7
/8 5
/16 21/4 11/8 35 /8 313 /16 311/16 12
5 43 /4-12 31/2-12 5 5.749 1 – 71/4 47/8 77/16 15
/16 5
/16 21/4 11/8 35 /8 313 /16 311/16 12
7
31/2 31/4-12 21/2-12 31/2 4.249 1 3 3
5 /4 3
3 /8 15
5 /16 15
/16 5
/16 1
2 /4 1
1 /8 35 /8 313 /16 311/16 12
4 33 /4-12 3-12 4 4.749 1 3
3 /8 1
6 /4 7
3 /8 5
6 /16 15
/16 5
/16 1
2 /4 1
1 /8 35 /8 313 /16 311/16 12
31/2 31/4-12 21/2-12 31/2 4.249 1 3 3
5 /4 3
3 /8 15
5 /16 15
/16 5
/16 1
2 /4 1
1 /2 35 /8 315 /16 313/16 131/4
51/2 51/4-12 4-12 51/2 6.249 1 – 3
7 /4 3
5 /8 15
7 /16 15
/16 5
/16 2 /4 1 /16 35 /8 315 /16 313/16
1 5
131/4
8
4 33 /4-12 3-12 4 4.749 1 3
3 /8 1
6 /4 7
3 /8 5
6 /16 15
/16 5
/16 21/4 11/2 35 /8 315 /16 313/16 131/4
5 43 /4-12 31/2-12 5 5.749 1 – 1
7 /4 7
4 /8 7
7 /16 15
/16 5
/16 1
2 /4 1
1 /2 35 /8 315 /16 313/16 131/4

Atlas Cylinders
27 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
7" and 8" Bore Sizes Atlas Series H

Cap Fixed Clevis Mount

Style PB2
View
Table of
Contents

ZC + STROKE
Y P + STROKE
WF LG + STROKE
EE E
CD
1

MM 2 4 E

MR

LR
RT 3
K G J L M CW CB CW
XC + STROKE

Rod End Dimensions — see Table 2

Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread
Small Male Intermediate Male Short Female Stub End Style 4
Special thread,
extension, rod eye,
WF
VF VF blank, etc., are also
.125
available.
To order, specify
20° MM B RD “Style 4” and give
desired dimensions
for KK, A and WF.
RT
If otherwise special,
furnish dimensioned
sketch.
Over 2" rod sizes or special rod ends are cut threads. Style 1 rod ends where female rod end threads are required. If rod end is not specified,
are recommended where the workpiece is secured against the rod style 1 will be supplied. On 5" rods and above, (4) .515 dia. spanner
shoulder. When the workpiece is not shouldered, style 2 rod ends are wrench holes will be provided instead of wrench flats.
recommended over 2" piston rod diameters. Use style 3 for applications

Atlas Cylinders
28 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
7" and 8" Bore Sizes Atlas Series H

Table 1—Envelope and Mounting Dimensions

+.000 EE Add Stroke
View -.002
Table of Bore CB CD ؆ CW E NPTF SAE G J K L LR M MR R LG P
Contents 7 3 2.501 11/2 81/2 11/4 20 23 /4 23 /4 11/4 3 23 /4 21/2 2 7 /8 6.58 81/2 55/8
8 3 3.001 11/2 91/2 11/2 24 3 3 11/2 31/4 31/4 23 /4 31/8 7.50 91/2 63/8
 SAE straight thread ports are standard and are indicated by port number.
NPTF ports are available at no extra charge.
† Dimension CD is pin diameter.

Table 3 —
Envelope and
Mounting
Table 2—Rod Dimensions Dimensions
Thread Rod Extensions and Pilot Dimensions Add Stroke
Rod Style Style +.000
Dia. 2 1 & 3 -.002 RD
Bore MM CC KK A BØ C D LAF NA (Max.) RT VF WF Y XC ZC
3 23 /4-12 21/4-12 31/2 3.749 1 2 5 /8 53 /4 2 7 /8 57/16 7
/8 5
/16 21/4 311/16 133 /4 161/4
5 43 /4-12 31/2-12 5 5.749 1 – 71/4 47/8 77/16 15
/16 5
/16 21/4 311/16 133 /4 161/4
7
31/2 1 1 1
3 /4-12 2 /2-12 3 /2 4.249 1 3 3
5 /4 3
3 /8 15
5 /16 15
/16 5
/16 21/4 311/16 133 /4 161/4
3 3 1 7 5 15 5
4 3 /4-12 3-12 4 4.749 1 3 /8 6 /4 3 /8 6 /16 /16 /16 21/4 311/16 133 /4 161/4
31/2 1 1 1
3 /4-12 2 /2-12 3 /2 4.249 1 3 3
5 /4 3
3 /8 15
5 /16 15
/16 5
/16 21/4 313/16 15 173 /4
51/2 1
5 /4-12 4-12 1
5 /2 6.249 1 – 3
7 /4 3
5 /8 15
7 /16 15
/16 5
/16 21/4 313/16 15 173 /4
8 3 3 1 7 5 15 5
4 3 /4-12 3-12 4 4.749 1 3 /8 6 /4 3 /8 6 /16 /16 /16 21/4 313/16 15 173 /4
3 1 1 7 7 15 5
5 4 /4-12 3 /2-12 5 5.749 1 – 7 /4 4 /8 7 /16 /16 /16 21/4 313/16 15 173 /4

Atlas Cylinders
29 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
7" and 8" Bore Sizes Atlas Series H

Head Trunnion Mount ZB + STROKE

Style TM1 Y P + STROKE

View UT
WF LG + STROKE
Table of EE
Contents 1 K

1/8 R

E 4 2 TD MM

3
RT G J K

TL E TL
XG

Cap Trunnion Mount ZB + STROKE

Style TM2 Y P + STROKE
WF LG + STROKE
UT
EE
1 K

1/8 R

E 4 2 TD MM

3
RT G J K
TL E TL XJ + STROKE

Intermediate Trunnion Mount ZB + STROKE

Y P + STROKE
Style TM3 WF LG + STROKE
EE
UM
1 BD

K
1/8 R

2
UW E 4 TD MM

RT G J K

3
XI
E
TL TM TL  Dimension XI to be specified by customer.

Rod End Dimensions — see Table 2

Thread Style 1 Thread Style 2 Thread Style 3 Style 6 “Special” Thread
Small Male Intermediate Male Short Female Stub End Style 4
Special thread,
extension, rod eye,
WF
VF VF blank, etc., are also
.125
available.
To order, specify
20° MM B RD “Style 4” and give
desired dimensions
for KK, A and WF.
RT
If otherwise special,
furnish dimensioned
sketch.
Over 2" rod sizes or special rod ends are cut threads. Style 1 rod ends where female rod end threads are required. If rod end is not specified,
are recommended where the workpiece is secured against the rod style 1 will be supplied. On 5" rods and above, (4) .515 dia. spanner
shoulder. When the workpiece is not shouldered, style 2 rod ends are wrench holes will be provided instead of wrench flats.
recommended over 2" piston rod diameters. Use style 3 for applications

Atlas Cylinders
30 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
7" and 8" Bore Sizes Atlas Series H

Table 1—Envelope and Mounting Dimensions

EE +.000 Add Stroke
-.001
View NPTF SAE
Bore BD E G J K TD Ø TL TM UM UT UW LG P
Table of
Contents 7 3 1
8 /2 1
1 /4 20 23 /4 23 /4 11/4 2.500 21/2 93 /4 143 /4 131/2 111/2 81/2 55/8
8 31/2 91/2 11/2 24 3 3 11/2 3.000 3 11 17 151/2 133 /8 91/2 63/8
 SAE straight thread ports are standard and are indicated by port number.
NPTF ports are available at no extra charge.

Table 3 —
Envelope and
Table 2—Rod Dimensions Mounting Dimensions
Thread Rod Extensions and Pilot Dimensions Add Stroke
Rod Style Style +.000
Dia. 2 1 & 3 -.002 RD Min.
Bore MM CC KK A BØ C D LAF NA (Max.) RT VF WF XG XI Y XJ ZB
3 23 /4-12 21/4-12 31/2 3.749 1 2 5 /8 53 /4 2 7 /8 57/16 7
/8 5
/16 21/4 35 /8 69 /16 311/16 93 /8 12
5 43 /4-12 31/2-12 5 5.749 1 – 71/4 47/8 77/16 15
/16 5
/16 21/4 35 /8 69 /16 311/16 93 /8 12
7
31/2 31/4-12 21/2-12 31/2 4.249 1 3 53 /4 3 3 /8 515 /16 15
/16 5
/16 21/4 35 /8 69 /16 311/16 93 /8 12
4 33 /4-12 3-12 4 4.749 1 3 3 /8 61/4 37/8 65 /16 15
/16 5
/16 21/4 35 /8 69 /16 311/16 93 /8 12
31/2 31/4-12 21/2-12 31/2 4.249 1 3 53 /4 3 3 /8 515 /16 15
/16 5
/16 21/4 33 /4 71/16 313/16 101/4 131/4
51/2 51/4-12 4-12 51/2 6.249 1 – 73 /4 5 3 /8 715 /16 15
/16 5
/16 21/4 33 /4 71/16 313/16 101/4 131/4
8 5 15 5
4 3
3 /4-12 3-12 4 4.749 1 3
3 /8 1
6 /4 7
3 /8 6 /16 /16 /16 1
2 /4 33 /4 71/16 313/16 101/4 131/4
7 15 5
5 3 1
4 /4-12 3 /2-12 5 5.749 1 – 1
7 /4 7
4 /8 7 /16 /16 /16 1
2 /4 33 /4 71/16 313/16 101/4 131/4
 Dimension XI to be specified by customer.

Atlas Cylinders
31 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Double Rod Models / Retainer Table Atlas Series H

How to Use Double Rod Cylinder Dimension Drawings Add Stroke Add 2X
Stroke
Rod Style Style

To determine dimensions for a Dia. FS SL
View double rod cylinder, first refer to
Table of Bore MM LD SN SS ZM
the desired single rod mounting ZM + 2 x STROKE
Contents Y P + STROKE 11/2 5
/8 47/8 2 7 /8 41/8 6 7 /8
style cylinder shown on preceding
pages of this catalog. After EE
K
2 1 47/8 2 7 /8 37/8 75 /8
selecting necessary dimensions 21/2 1 5 3 3 5 /8 73 /4
from that drawing return to this 31/4 13 /8 53 /4 31/2 4 3 /8 9
page, supplement the single rod MM 4 13 /4 6 33 /4 41/4 93 /4
dimensions with those shown 41/4
5 2 61/2 43 /4 101/2
on drawing and dimension table.
Note that double rod cylinders RT G 6 21/2 7 3 /8 47/8 51/8 117/8
G RT
have a head (Dim. G) at both WF LD + STROKE 7 3 81/2 5 3 /8 53 /4 13
ends and that dimension LD 8 31/2 91/2 61/8 63 /4 14
replaces LG. The double rod
dimensions differ from, or are in
On a double rod cylinder where the two rod All dimensions are in inches and apply to
addition to, those for single rod
ends are different, be sure to clearly state smallest rod sizes only. For alternate rod
cylinders shown on preceding
which rod end is to be assembled at which sizes, determine all envelope dimensions (within
pages and provide the information
end. Port position 1 is standard. If other LD dim.) as described above and then use
needed to completely dimension
than standard, specify pos. 2, 3 or 4 when appropriate rod end dimensions for proper
a double rod cylinder.
viewed from one end only. rod size from single rod cylinder.

Bolted & Full Plate Retainer Held Gland

NM2, BEF1, NM1,
BEF2, ME6, SL, NM3, The chart at the left specifies the gland
Rod FS, TM1, TM2, REF1, retainer construction – Bolted Retainer or Full
Bore Dia. PB2, TM3, SA REF2 ME5 Face Retainer – that will be supplied based
5/8 B R B on the bore, rod diameter and mounting
1 1/2 combination selected in the cylinder model
1 R R B
number.
1 B R B
2
1 3/8 R R B
1 B B B
2 1/2 1 3/8 B B B
1 3/4 B R B
1 3/8 B B B
3 1/4 1 3/4 B B B
2 B B B
1 3/4 B B B
4 2 B B B
2 1/2 B B B
2 B B B
2 1/2 B B B
5
3 B B B
3 1/2 B R B
2 1/2 B B B
3 B B B
6
3 1/2 B B B
4 B B B
3 B B B
3 1/2 B B B
7
4 B B B
5 B B B
3 1/2 B B B
4 B B B
8 Rod Bearing Construction
5 B B B B = Bolted Gland
5 1/2 B B B R = Retainer Held Gland

Atlas Cylinders
32 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Notes Atlas Series H

NOTES
View
Table of
Contents

Atlas Cylinders
33 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Features/Specifications Atlas Series H

Series H
View Large Bore
Table of
Contents High Pressure Hydraulic Cylinders

Long inboard cast iron SAE Ports are standard. Adjustable, floating, End seal design
bearing is lubricated stepped cushions. prevents extrusion.
from within.

Polypak™
Primary Seal

Bolt-on rod gland assembly

simplifies maintenance.
Hi-Load piston is standard –
with rugged filled PTFE seals
and bearings.

Chrome plated High strength alloy tie rods

piston rod. made from 125,000 psi
minimum yield strength
material.

Standard Specifications
• Heavy Duty Service • Piston Rod Diameter – 41/2" through 10"
• Standard Construction – Square Head – Tie Rod Design • Mounting Styles – Twelve standard styles at various
• Nominal Pressure – 3000 PSI* application ratings
• Standard Fluid – Hydraulic Oil • Strokes – Available in any practical stroke length
• Standard Temperature – -10°F. to +165°F.** • Cushions – Optional at either end or both ends of stroke
• Bore Sizes – 10" through 20" (Larger sizes available) • Rod Ends – Two Standard Choices – Specials to Order
*If hydraulic operating pressure exceeds 3000 PSI, send application data for engi-
In line with our policy of continuing product improvement, neering evaluation and recommendation. See page 58 for actual design factors.
specifications in this catalog are subject to change.
** See page 57 for higher temperature service.

Atlas Cylinders
34 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Mountings – Large Bore Sizes Atlas Series H

Series H
View Large Bore
Table of
Contents High Pressure Hydraulic Cylinders

Available Mounting Styles

Tie Rods Extended Head End Tie Rods Extended Cap End Tie Rods Extended Both Ends

Style NM3 Style NM2 Style NM1

10"-14" 10"-14" 10"-14"

(NFPA MX3) (NFPA MX2) (NFPA MX1)

Head Rectangular Head Square Flange Cap Rectangular

Style ME5 Style IH3 Style ME6

10"-20" 10"-20" 10"-20"

(NFPA ME5) (NFPA MF5) (NFPA ME6)

Cap Square Flange Side Lug Cap Fixed Clevis

Style IH4 Style SL Style PB2

10"-20" 10"-14" 10"-20"

(NFPA MF6) (NFPA MS2) (NFPA MP1)

Head Trunnion Cap Trunnion Intermediate Fixed Trunnion

Style TM1 Style TM2 Style TM3

10"-14" 10"-14" 10"-14"

(NFPA MT1) (NFPA MT2) (NFPA MT4)

Atlas Cylinders
35 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Tie Rod Mountings – Large Bore Sizes Atlas Series H

ZB + STROKE
Tie Rods Extended Head End
ZJ + STROKE
Style NM3 Y P + STRO KE
View (NFPA Style MX3) WF LG + STROKE
Table of E EE
Contents 1 DD

AA

2 E
4 MM

3
BB G J K

Tie Rods Extended Cap End ZB + STROKE

Style NM2 ZJ + STROKE
Y P + STROKE
(NFPA Style MX2) WF LG + STROKE
E EE DD
1

AA
2
4 E MM

3 K
G J BB

ZB + STROKE
Tie Rods Extended Both Ends Basic Mounting (NM0) — Not shown is
no tie rod extended and can be supplied ZJ + STROKE
Style NM1 upon request. Y P + STROKE
(NFPA Style MX1) WF LG + STROKE
E DD
EE
1

AA

2
E MM
4

3
K
BB G J BB

Rod End Dimensions — see Table 2

Thread Style 1 LAF Thread Style 3 Special Thread
A
(NFPA Style SM) (NFPA Style SF) Style 4
A WF WF
Small Male Small Female Special thread,
F F
KK
extension, rod eye,
C C blank, etc., are also
KK
available.
To order, specify
B MM RD B MM RD “Style 4” and give
desired dimensions
for KK, A and WF.
.515 DIA. .515 DIA. If otherwise special,
x .75 DEEP x .50 DEEP
4 HOLES NA 4 HOLES NA furnish dimensional
V V
sketch.

If rod end is not specified, Style 1 will Use Style 3 for applications where
be furnished. female rod ends are required.

Atlas Cylinders
36 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Tie Rod Mountings – Large Bore Sizes Atlas Series H

Table 1—Envelope and Mounting Dimensions

EE* EEf S.A.E. EE** S.A.E. Add Stroke
View NPTF FLANGE STRAIGHT
Bore AA BB DD E PORT
THREAD G J K RA RB RC RR LG P
Table of
Contents 10 13.00 41/8 11/8-12 125 /8 2 2 24 311/16 311/16 19 /32 5.291 3.775 – 21/8 121/8 81/2
12 15.50 41/2 11/4-12 147/8 21/2 21/2 24 47/16 47/16 113 /32 6.270 4.555 – 2 3 /8 141/2 101/8
14 17.38 41/2 11/4-12 171/8 21/2 21/2 24 47/8 47/8 113 /32 7.485 6.143 4.409 21/4 155 /8 107/8
* NPTF ports are available at no extra charge.
Optional SAE flange ports may be specified – flange to be supplied by
customer. See Table 4 for flange port pattern dimensions.
** SAE straight thread ports are standard and are indicated by port number.

Table 3 —
Envelope and
Mounting
Table 2—Rod Dimensions Dimensions
Rod Extensions and Pilot Dimensions Add Stroke
Rod +.000
Dia. Thread -.005
Bore MM KK A BØ C F LAF NA RD V WF Y ZB ZJ
41/2 31/4-12 41/2 5.249 1 115 /16 77/16 43 /8 81/4 1
/4 215 /16 43 /4 1611/32 151/16
7 5-12 7 7.999 1 115 /16 101/2 67/8 101/2 3
/8 31/2 55 /16 1629 /32 155 /8
10 1 15 3 7 7 1 3 19
5 3 /2-12 5 5.749 1 1 /16 8 /16 4 /8 8 /8 /4 3 /16 5 16 /32 155 /16
1 1 15 11 3 3 1 3 19
5 /2 4-12 5 /2 6.249 1 1 /16 8 /16 5 /8 9 /8 /4 3 /16 5 16 /32 155 /16
1 1 15 11 3 3 1 3 3 3
5 /2 4-12 5 /2 6.249 1 1 /16 8 /16 5 /8 9 /8 /4 3 /16 5 /8 19 /32 1711/16
3 15 7 1 3 3 29
12 8 5 /4-12 8 8.999 1 1 /16 12 7 /8 12 /2 /8 4 6 /16 19 /32 181/2
15 1 7 1 3 1 11 13
7 5-12 7 7.999 1 1 /16 10 /2 6 /8 10 /2 /8 3 /2 5 /16 19 /32 18
7 5-12 7 7.999 1 115 /16 101/2 67/8 101/2 3
/8 31/2 57/8 2017/32 191/8
14 10 71/4-12 10 10.999 1 115 /16 141/2 97/8 141/2 3
/8 41/2 67/8 2117/32 201/8
3 15 7 1 3 3 1
8 5 /4-12 8 8.999 1 1 /16 12 7 /8 12 /2 /8 4 6 /8 21 /32 195 /8

Table 4—Optional SAE Flange Port Pattern Table 5—Tie Rod Information
see Table 1 for dimensions
RA
RA
A DIA. RA RB
RR DIA. RB
RB RC
RC
RA
RB
Q

W
RR DIA
RA RA
RB RA
HEAD RB
OR CAP RA RC RB
RB RC
X Z-4 HOLES
FULL THREAD AA/2 AA/2
GG
DEPTH AA

Nom. S.A.E. 10", 12" Bores, 8 Tie Rods 14" Bores, 12 Tie Rods
Flange Flange Z-THD AA
Size Dash Size A Q GG W X UNC-2B Min.
11/ 2 -24 1.50 2.750 1.406 1.38 0.70 1
/ 2-13 1.06
1
2 -32 2.00 3.062 1.688 1.53 0.84 / 2-13 1.06
21/ 2 -40 2.50 3.500 2.000 1.75 1.00 1
/ 2-13 1.19
5
3 -48 3.00 4.188 2.438 2.09 1.22 /8-11 1.19

Atlas Cylinders
37 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Mounting Information – Large Bore Sizes Atlas Series H

Head Rectangular Mounting

ZB + STROKE
Style ME5 (10"-14" Bore) UF Y P + STROKE
View (NFPA Style ME5) TF WF LG + STROKE
Table of 1
Contents

4
E R MM
2

3 FB
E G J K
4 HOLES

Head Rectangular Mounting ZB + STROKE

UF Y P + STROKE
Style ME5 (16"-20" Bore) TF WF LG + STROKE
(NFPA Style ME5) 1 EE

2
EJ RA R MM
4

FB
3 8 HOLES
E G J K

ZB + STROKE
Head Square Flange Mounting EX
Y P + STROKE
TE
Style IH3 RE WF LG + STROKE
(NFPA Style MF5) 1 EE

2 TE
E EX MM
4
RE

3 EB G J K
E 8 HOLES

Rod End Dimensions — see Table 2

Thread Style 1 LAF Thread Style 3 Special Thread
A
(NFPA Style SM) (NFPA Style SF) Style 4
A WF WF
Small Male Small Female Special thread,
F F
KK
extension, rod eye,
C C blank, etc., are also
KK
available.
To order, specify
B MM RD B MM RD “Style 4” and give
desired dimensions
for KK, A and WF.
.515 DIA. .515 DIA. If otherwise special,
x .75 DEEP x .50 DEEP
4 HOLES NA 4 HOLES NA furnish dimensional
V V
sketch.

If rod end is not specified, Style 1 will Use Style 3 for applications where
be furnished. female rod ends are required.

Atlas Cylinders
38 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Mounting Information – Large Bore Sizes Atlas Series H

Table 1—Envelope and Mounting Dimensions

EE* EEf S.A.E. EE** S.A.E. Add Stroke
View NPTF FLANGE STRAIGHT
Bore E EB PORT THREAD EX FB G J K R RE TE TF UF LG P
Table of
Contents 10 125 /8 15 /16 2 2 24 165 /8 113 /16 311/16 311/16 19 /32 9.62 9.89 14.13 157/8 19 121/8 81/2
12 147/8 19 /16 21/2 21/2 24 193 /4 21/16 47/16 47/16 113 /32 11.45 11.75 16.79 181/2 22 141/2 101/8
14 171/8 113 /16 21/2 21/2 24 213 /4 25 /16 47/8 47/8 113 /32 13.26 12.90 18.43 21 25 155 /8 107/8

Table 1A—Envelope and Mounting Dimensions

Add Stroke
EE EE
Bore E EB (SAE) (FLANGE) EJ EX FB G J K R RA RE TE TF UF LG P
16 19 113 /16 24 3 20 241/2 113 /16 57/8 57/8 129 /32 151/2 8 15.28 21.03 21 241/2 181/8 121/8
18 22 21/16 24 3 23 261/2 21/16 6 7 /8 6 7 /8 129 /32 18 71/4 16.45 22.65 241/4 281/4 211/8 151/8
1
20 24 21/16 24 3 25 29 21/16 7 7 /8 7 7 /8 129 /32 20 8 18.07 24.87 261/2 30 /2 235 /8 175 /8
* NPTF ports are available at no extra charge.
 Optional SAE flange ports may be specified – flange to be supplied by customer. See Table 4 for flange port pattern dimensions.
** SAE straight thread ports are standard and are indicated by port number.

Table 3 —Envelope and

Table 2—Rod Dimensions Mounting Dimensions
Rod Extensions and Pilot Dimensions Add Stroke
Rod +.000
Dia. Thread -.005
Bore MM KK A BØ C F LAF NA RD V WF Y ZB
41/2 31/4-12 41/2 5.249 1 115 /16 77/16 43 /8 81/4 1
/4 215 /16 43 /4 1611/32
7 5-12 7 7.999 1 115 /16 101/2 67/8 101/2 3
/8 31/2 55 /16 1629 /32
10 1 15 3 7 7 1
5 3 /2-12 5 5.749 1 1 /16 8 /16 4 /8 8 /8 /4 3
3 /16 5 1619 /32
51/2 4-12 51/2 6.249 1 115 /16 811/16 53 /8 93 /8 1
/4 33 /16 5 1619 /32
51/2 4-12 51/2 6.249 1 115 /16 811/16 53 /8 93 /8 1
/4 33 /16 5 3 /8 193 /32
12 8 3
5 /4-12 8 8.999 1 15
1 /16 12 7 1
7 /8 12 /2 3
/8 4 3
6 /16 1929 /32
15 1 7 1 3 11
7 5-12 7 7.999 1 1 /16 10 /2 6 /8 10 /2 /8 1
3 /2 5 /16 1913 /32
7 5-12 7 7.999 1 115 /16 101/2 67/8 101/2 3
/8 31/2 57/8 2017/32
14 10 71/4-12 10 10.999 1 115 /16 141/2 97/8 141/2 3
/8 41/2 6 7 /8 2117/32
3 15 7 1 3 3
8 5 /4-12 8 8.999 1 1 /16 12 7 /8 12 /2 /8 4 6 /8 211/32
3 15 7 1 3
8 5 /4-12 8 8.999 1 1 /16 12 7 /8 12 /2 /8 4 7 241/32
16 9 61/2-12 9 9.999 1 115 /16 131/4 87/8 131/2 3
/8 41/4 71/4 249 /32
10 71/4-12 10 10.999 1 115 /16 141/2 97/8 141/2 3
/8 41/2 71/2 2417/32
1 15 1 7 1 3 1
9 6 /2-12 9 9.999 1 1 /16 13 /4 8 /8 13 /2 /8 1
4 /4 7 /4 279 /32
18
10 71/4-12 10 10.999 1 15 1 7
1 /16 14 /2 9 /8 14 /2 1 3
/8 1
4 /2 1
7 /2 2717/32
20 10 71/4-12 10 10.999 1 115 /16 141/2 97/8 141/2 3
/8 41/2 71/2 301/32

Table 4—Optional SAE Flange Port Pattern Table 5—Tie Rod Information
RA RA
A DIA. A DIA. RA RA RB RB

RB RR DIA.
RB RC RC

Q Q

W W

RA RA RA RA
RB RB
HEAD HEAD RB RB
OR CAP OR CAP RC RC
X Z-4 HOLES X Z-4 HOLES
GG FULL THREAD
GG FULL THREAD
DEPTH AA DEPTH AA
10", 12" Bores 14" Bore
Nom. S.A.E.
Flange Flange Z-THD AA Bore 10 12 14 16 18 20
Size Dash Size A Q GG W X UNC-2B Min. Tie Rod Thread 11/8-12 11/4-12 11/4-12 * * *
11/2 -24 1.50 2.750 1.406 1.38 0.70 1
/2-13 1.06 RA 5.291 6.270 7.485 * * *
1
2 -32 2.00 3.062 1.688 1.53 0.84 /2-13 1.06 RB 3.775 4.555 6.143 * * *
21/2 -40 2.50 3.500 2.000 1.75 1.00 1
/2-13 1.19 RC — — 4.409 * * *
5
3 -48 3.00 4.188 2.438 2.09 1.22 /8-11 1.19 *Consult factory for dimensions

Atlas Cylinders
39 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Mounting Information – Large Bore Sizes Atlas Series H

Cap Rectangular Mountings

Style ME6 (10"-14" Bore) XF + STROKE
(NFPA Style ME6) Y P + STROKE
View UF
WF LG + STROKE
Table of TF
EE
Contents 1

2
E R MM
4

3
E FB K G J
4 HOLES

Cap Rectangular Mountings

X F + STROKE
Style ME6 (16"-20" Bore) UF Y P + STROKE
(NFPA Style ME6) TF WF LG + STROKE
1 EE

2 E
EJ RA MM
4 R

3 FB K G J
E 8 HOLES

Cap Square Flange Mounting EX XF + STROKE

Y P + STROKE
Style IH4 TE
WF LG + STROKE
(NFPA Style MF6) RE
EE
1

4 TE
E RE MM
2
EX

3 EB K G J
E 8 HOLES

Side Lugs Mounting Note: Stroke lengths on lug mounted cylinders should not be shorter than
the cylinder bore diameter. Consult factory for recommendations on shorter
Style SL stroke lengths. ZB + STROKE
10"-14" Bore only US Y P + STROKE
(NFPA Style MS2) E WF LG + STROKE
1 EE

2
E MM
4
ST
E/2 +-..000050

3
SW SW K G
SW SW J K
SB
TS SW SU SU SW
4 HOLES
XS SS + STROKE

Atlas Cylinders
40 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Mounting Information – Large Bore Sizes Atlas Series H

Rod End Dimensions — see Table 2

LAF
Thread Style 1 LAF
Thread StyleA3 A Special Thread
A
View (NFPA Style SM)
A WF
WF
(NFPA Style SF)
F
WF
WF
F
Style 4
Table of
F F
Small Male C Small Female
KK
KK
C
Special thread, extension, rod eye,
Contents KK
C KK C
blank, etc., are also available.
To order, specify “Style 4” and give
B MM RD
Use Style B MM RD
B MM RD B 3 for MM RD desired dimensions for KK, A and
If rod end is not applications where
specified, Style 1 will female rod ends WF. If otherwise special, furnish
.515 DIA. .515 DIA.
be furnished. .515 DIA.
x .75 DEEP
x .75 DEEP
NA
are required.
.515 DIA.
x .50 DEEP
x .50 DEEP
NA
dimensional sketch.
NA 4 HOLES NA 4 HOLES
4 HOLES 4 HOLES
V V
V V

Table 1—Envelope and Mounting Dimensions

EEf EE** Add Stroke
EE* S.A.E. S.A.E.
NPTF FLANGE STRAIGHT
Bore E EB PORT THREAD EX FB G J K R RE SB ST SU SW TE TF TS UF US LG P SS
10 125 /8 15 /16 2 2 24 165 /8 113 /16 311/16 311/16 19 /32 9.62 9.89 19 /16 21/4 31/2 15 /8 14.13 157/8 157/8 19 191/8 121/8 81/2 87/8
12 147/8 19 /16 21/2 21/2 24 193 /4 21/16 47/16 47/16 113 /32 11.45 11.75 19 /16 3 41/4 2 16.79 181/2 187/8 22 227/8 141/2 101/8 101/2
14 171/8 113 /16 21/2 21/2 24 213 /4 25 /16 47/8 47/8 113 /32 13.26 12.90 25 /16 4 43 /4 21/4 18.43 21 215 /8 25 261/8 155 /8 107/8 111/8
Table 1A—Envelope and Mounting Dimensions * NPTF ports are available at no
extra charge.
Add Stroke  Optional SAE flange ports may
EE EE
be specified – flange to be sup-
Bore E EB (SAE) (FLANGE) EJ EX FB G J K R RA RE TE TF UF LG P plied by customer. See Table
16 19 113 /16 24 3 20 241/2 113 /16 57/8 57/8 129 /32 151/2 8 15.28 21.03 21 241/2 181/8 121/8 4 for flange port pattern dimen-
sions.
18 22 21/16 24 3 23 261/2 21/16 67/8 67/8 129 /32 18 71/4 16.45 22.65 241/4 281/4 211/8 151/8 ** SAE straight thread ports are
standard and are indicated by
20 24 21/16 24 3 25 29 21/16 77/8 77/8 129 /32 20 8 18.07 24.87 261/2 301/2 235 /8 175 /8 port number.

Table 3 —Envelope and

Table 2—Rod Dimensions Mounting Dimensions
Rod Extensions and Pilot Dimensions Add Stroke
Rod +.000
Dia. Thread -.005
Bore MM KK A BØ C F LAF NA RD V WF Y XS XF ZB
1
4 /2 1
3 /4-12 1
4 /2 5.249 1 115 /16 77/16 43 /8 81/4 1
/4 215 /16 43 /4 49 /16 151/16 1611/32
10 7 5-12 7 7.999 1 115 /16 101/2 67/8 101/2 3
/8 31/2 55 /16 51/8 155 /8 1629 /32
5 31/2-12 5 5.749 1 115 /16 83 /16 47/8 87/8 1
/4 33 /16 5 413 /16 155 /16 1619 /32
51/2 4-12 51/2 6.249 1 115 /16 811/16 53 /8 9 3 /8 1
/4 33 /16 5 413 /16 155 /16 1619 /32
1
5 /2 4-12 1
5 /2 6.249 1 15 11
1 /16 8 /16 5 /8 3 3
9 /8 1
/4 3 /16 5 /8 53 /16 1711/16 193 /32
3 3

12 8 53 /4-12 8 8.999 1 115 /16 12 77/8 121/2 3

/8 4 63 /16 6 181/2 1929 /32
7 5-12 7 7.999 1 115 /16 101/2 67/8 101/2 3
/8 31/2 511/16 51/2 18 1913 /32
7 5-12 7 7.999 1 115
/16 10 1
/ 2 6 7
/ 8 10 1
/ 2
3
/ 8 31
/ 2 57
/ 8 5 3
/4 191
/8 2017/32
14 10 71/4-12 10 10.999 1 115 /16 141/2 97/8 141/2 3
/8 41/2 67/8 63 /4 201/8 2117/32
8 53 /4-12 8 8.999 1 115 /16 12 77/8 121/2 3
/8 4 63 /8 61/4 195 /8 211/32
8 53 /4-12 8 8.999 1 115 /16 12 77/8 121/2 3
/8 4 7 * 221/8 *
16 9 61/2-12 9 9.999 1 115 /16 131/4 87/8 131/2 3
/8 41/4 71/4 * 223 /8 *
10 71/4-12 10 10.999 1 115 /16 141/2 97/8 141/2 3
/8 41/2 71/2 * 225 /8 *
9 61/2-12 9 9.999 1 115 /16 131/4 87/8 131/2 3
/8 41/4 71/4 * 253 /8 *
18
10 71/4-12 10 10.999 1 115 /16 141/2 97/8 141/2 3
/8 41/2 71/2 * 255 /8 *
20 10 71/4-12 10 10.999 1 115 /16 141/2 97/8 141/2 3
/8 41/2 71/2 * 281/8 * *Consult Factory
RA
Table 4—Optional SAE A DIA. TableRA5—Tie Rod Information
RB RA

Flange Port Pattern A DIA. RB RR DIA.

RA RC RB
RB RC
10", 12" Bores 14" Bore
Q
Q
W
W
RA RA
RA RB RA
HEAD RB RB
HEAD RB RC
OR CAP OR CAP RC
X Z-4 HOLES FULL X Z-4 HOLES
GG THREAD DEPTH AA FULL THREAD
GG
DEPTH AA
Nom. S.A.E. Bore 10 12 14 16 18 20
Flange Flange Z-THD AA
Size Dash Size A Q GG W X UNC-2B Min. Tie Rod Thread 11/8-12 11/4-12 11/4-12 * * *
11/2 -24 1.50 2.750 1.406 1.38 0.70 1/2-13 1.06 RA 5.291 6.270 7.485 * * *
1
2 -32 2.00 3.062 1.688 1.53 0.84 /2-13 1.06 RB 3.775 4.555 6.143 * * *
1
21/2 -40 2.50 3.500 2.000 1.75 1.00 /2-13 1.19 RC — — 4.409 * * *
3 -48 3.00 4.188 2.438 2.09 1.22 5
/8-11 1.19 *Consult factory for dimensions

Atlas Cylinders
41 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Mounting Information – Large Bore Sizes Atlas Series H

Cap Fixed Clevis Mountings ZC + STRO KE

Style PB2 Y P + STROKE
View (NFPA Style MP1) WF LG + STROKE E
Table of EE
1
Contents CD

LR

4 E
MM 2
MR

PIVOT PIN
FURNISHED
J K WITH CYLINDER 3
G
L
XC + STROKE M CW CW
CB

Head Trunnion Mounting

Style TM1 ZB + STROKE
Y P + STROKE
10"-14" Bore only For Style TM1 Mount
WF L G + STRO KE
Maximum Pressure UT
(NFPA Style MT1) Rating - PSI
1 EE
Bore PSI
10 2800
12 2350
14 2200
4
E 2 TD MM

3
G J K
TL E TL XG

Cap Trunnion Mounting

ZB + STROKE
Style TM2 Y P + STROKE
For Style TM2 Mount
10"-14" Bore only Maximum Pressure UT WF LG + STROKE
(NFPA Style MT2) Rating - PSI 1 EE
Bore PSI
10 2800
12 2350
14 2200
4
E TD M M
2

3 K
G J
TL E TL
XJ

ZB+STROKE
Intermediate Fixed Trunnion Mounting
Y P+STROKE
Style TM3 For Style TM3 Mount UM WF LG+STROKE
(10"-14" Bore Only) Maximum Pressure
Rating - PSI
E EE
(NFPA Style MT4) 1
Bore PSI
10 2800
12 2350
14 2200
4 2
TY TD E UW MM

3 G J K
TL TM TL XI◆◆
BD
 Dimension XI to be specified by customer.

Atlas Cylinders
42 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Mounting Information – Large Bore Sizes Atlas Series H

Rod End Dimensions — see Table 2

LAF
Thread Style 1 LAF
Thread Style A3 A Special Thread
A
View (NFPA Style SM)
A WF
WF
F (NFPA Style SF) WF
WF
F
Style 4
Table of
F F
Small Male C Small Female
KK
KK
C
Special thread, extension, rod eye,
Contents KK
C KK C
blank, etc., are also available.
To order, specify “Style 4” and give
B
B
MM RD UseMM RD 3 for
Style B
B
MM RD
MM RD
desired dimensions for KK, A and
If rod end is not applications where
specified, Style 1 will female rod ends .515 DIA. WF. If otherwise special, furnish
.515 DIA.
be furnished. .515 DIA.
x .75 DEEP
x .75 DEEP
NA
are.515
required.
DIA.
x .50 DEEP
x .50 DEEP
NA
dimensional sketch.
NA 4 HOLES NA 4 HOLES
4 HOLES 4 HOLES
V V
V V

Table 1—Envelope and Mounting Dimensions

+.001 EEf EE** +.000 Add Stroke
-.003 S.A.E. S.A.E. -.001
EE* FLANGE STRAIGHT
Bore BD CB CD Ø CW E NPTF PORT THREAD G J K L LR M MR TD Ø TL TM TY UM UT UW LG P
10 41/2 4 3.500 2 125 /8 2 2 24 311/16 311/16 19 /32 4 33 /8 31/2 31/2 3.500 31/2 14 13 21 195 /8 171/2 121/8 81/2
12 51/2 41/2 4.000 21/4 147/8 21/2 21/2 24 47/16 47/16 113 /32 41/2 37/8 4 4 4.000 4 161/2 151/2 241/2 227/8 203 /4 141/2 101/8
14 51/2 6 5.000 3 171/8 21/2 21/2 24 47/8 47/8 113 /32 53 /4 43 /16 5 5 4.500 41/2 191/2 191/4 281/2 261/8 243 /4 155 /8 107/8
Table 1A—Envelope and Mounting Dimensions (Style PB2 only)
* NPTF ports are available at no extra charge.
Add Stroke  Optional SAE flange ports may be specified –
EE EE flange to be supplied by customer. See Table
Bore (SAE) (FLANGE) CB CD CW G
E J K L LR M MD MR LG P 4 for flange port pattern dimensions.
** SAE straight thread ports are standard and
16 19 24 3 7 6 31/2 57/8 57/8 129 /32 7 61/4 6 16 6 181/8 121/8 are indicated by port number.
18 22 24 3 8 61/2 4 6 7 /8 67/8 129 /32 75 /8 63 /4 61/2 18 61/2 211/8 151/8 Dimension CD is pin diameter.
20 24 24 3 9 71/2 41/2 77/8 77/8 129 /32 83 /4 73 /4 71/2 20 71/2 235 /8 175 /8

Table 3—Envelope and

Table 2—Rod Dimensions Mounting Dimensions
Rod Extensions and Pilot Dimensions Add Stroke
Rod +.000
Dia. Thread -.005 Min.
Bore MM KK A BØ C F LAF NA RD V WF XG XI* Y XC XJ ZB ZC
41/2 31/4-12 41/2 5.249 1 115 /16 77/16 43 /8 81/4 1
/4 215 /16 43 /4 91/16 43 /4 191/16 133 /8 1611/32 229 /16
7 5-12 7 7.999 1 115 /16 101/2 67/8 101/2 3
/8 31/2 55 /16 95 /8 55 /16 195 /8 1315 /16 1629 /32 231/8
10
5 31/2-12 5 5.749 1 115 /16 83 /16 47/8 87/8 1
/4 33 /16 5 95 /16 5 195 /16 135 /8 1619 /32 2213 /16
1 1 15 11 3 3 1 3 5
5 /2 4-12 5 /2 6.249 1 1 /16 8 /16 5 /8 9 /8 /4 3 /16 5 9 /16 5 195 /16 135 /8 1619 /32 2213 /16
51/2 4-12 51/2 6.249 1 115 /16 811/16 53 /8 93 /8 1
/4 33 /16 53 /8 105 /8 53 /8 223 /16 151/2 193 /32 263 /16
12 8 53 /4-12 8 8.999 1 115 /16 12 77/8 121/2 3
/8 4 63 /16 111/2 63 /16 23 165 /16 1929 /32 27
7 5-12 7 7.999 1 115 /16 101/2 67/8 101/2 3
/8 31/2 511/16 1015 /16 511/16 221/2 1513 /16 1913 /32 261/2
7 5-12 7 7.999 1 115 /16 101/2 67/8 101/2 3
/8 31/2 515 /16 117/16 57/8 247/8 1611/16 2017/32 297/8
1 15 1 7 1 3
14 10 7 /4-12 10 10.999 1 1 /16 14 /2 9 /8 14 /2 /8 41/2 615 /16 127/16 67/8 257/8 1711/16 2117/32 307/8
8 53 /4-12 8 8.999 1 115 /16 12 77/8 121/2 3
/8 4 67/16 1115 /16 63 /8 253 /8 173 /16 211/32 303 /8
8 53 /4-12 8 8.999 1 115 /16 12 77/8 121/2 3
/8 4 ** ** 7 291/8 ** ** 351/8
1 15 1 7 1 3 1
16 9 6 /2-12 9 9.999 1 1 /16 13 /4 8 /8 13 /2 /8 4 /4 ** ** 7 /4 293 /8
1
** ** 353 /8
10 71/4-12 10 10.999 1 115 /16 141/2 97/8 141/2 3
/8 41/2 ** ** 71/2 295 /8 ** ** 355 /8
9 61/2-12 9 9.999 1 115 /16 131/4 87/8 131/2 3
/8 41/4 ** ** 71/4 33 ** ** 391/2
18
10 71/4-12 10 10.999 1 115 /16 141/2 97/8 141/2 3
/8 41/2 ** ** 71/2 331/4 ** ** 393 /4
20 10 71/4-12 10 10.999 1 115 /16 141/2 97/8 141/2 3
/8 41/2 ** ** 71/2 367/8 ** ** 443 /8
* Dimension XI to be specified by customer. **Consult Factory.
RA
Table 4—Optional SAE A DIA. Table
RA 5—Tie Rod Information
RB RA

Flange Port Pattern DIA.

A RB RR DIA. RA RC RB
RB RC

Q 10", 12" Bores 14" Bore

Q
W
W
RA RA
RA RB RA
HEAD RB
OR CAP RC RB
HEAD RB
X Z-4 HOLES FULL OR CAP RC
GG THREAD DEPTH AA X Z-4 HOLES
GG FULL THREAD
Nom. S.A.E. DEPTH AA
Flange Flange Z-THD AA Bore 10 12 14 16 18 20
Size Dash Size A Q GG W X UNC-2B Min.
Tie Rod Thread 11/8-12 11/4-12 11/4-12 * * *
11/2 -24 1.50 2.750 1.406 1.38 0.70 1
/2-13 1.06
RA 5.291 6.270 7.485 * * *
1
2 -32 2.00 3.062 1.688 1.53 0.84 /2-13 1.06
RB 3.775 4.555 6.143 * * *
21/2 -40 2.50 3.500 2.000 1.75 1.00 1
/2-13 1.19
RC — — 4.409 * * *
5
3 -48 3.00 4.188 2.438 2.09 1.22 /8-11 1.19 *Consult factory for dimensions

Atlas Cylinders
43 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Double Rod Models – Large Bore Sizes Atlas Series H

How to Use Double Rod Cylinder Dimensioned Drawings

View
Table of
Contents ZM + 2 x STROKE

ZB + STROKE

Y P + STROKE
Rod End #1 Rod End #2
WF LG + STROKE

EE

RD MM

G G K
SW SU SU SW
XS SS + STROKE

To obtain dimensioning information on

Dimension Shown a double rod cylinder, first select the Add 2X
Mounting Styles on This Page Supplement Rod Stroke
for Single Rod Dimensions on
desired mounting style and refer to the
Bore Dia. ZM
Models Pages Listed Below corresponding single rod cylinder model
41/2 18
NM3 36, 37 shown on the preceding pages. (See
7 191/8
NM2 36, 37 table at left.) After you have determined all 10 5 181/2
NM1 36, 37
necessary dimensions from that drawing,
turn back to this page and supplement those 51/2 181/2
ME5 38, 39 51/2 207/8
dimensions with additional ones from the
IH3 38, 39 8 221/2
drawing above and table at right. These 12
SL 40, 41 7 211/2
added dimensions differ from, or are in
TM1 42, 43 7
addition to, those shown on the preceding 225/8
TM3‡ 42, 43 pages and provide the additional information 14 10 245/8
* If only one end of these Double Rod Cylinders is to needed to completely dimension a double 8 235/8
be cushioned, be sure to specify clearly which end rod cylinder model. 8 261/8
this will be.
16 9 265/8
‡ Specify XI dimension from rod end #1. On a double rod cylinder where the two rod
10 271/8
ends are different, be sure to clearly state
which rod end is to be assembled at which 9 295/8
18
end. Port position 1 is standard. If other than 10 301/8
standard, specify pos. 2, 3 or 4 when viewed 20 10 325/8
from rod end #1 only. See port position
information on page 60.

Mounting Recommendations and Other Mountings

In addition to the standard mountings dimensioned on the preceding Trunnion Mountings — Cylinders require lubricated pillow blocks
pages, the following information covers mounting ideas that may with minimum bearing clearances. Pillow blocks should be carefully
prove helpful in your applications. When needed, special heads, aligned and rigidly mounted so the trunnions will not be subjected to
caps, and flanges can be provided. Sketches of your requirements, bending moments. The rod end connection should also be pivoted,
together with specifications relative to the application and forces with the customer’s pin in the piston rod eye parallel to the trunnions.
involved should be submitted. Clevis Mountings — Cylinders should be pivoted at both ends,
Mounting Bolts — High tensile socket head screws are with the customer’s pin in the piston rod eye parallel to the pivot pin
recommended for all mounting styles. Use 1/16" smaller than supplied with the clevis.
hole size.
Flange Mountings — Cylinders can be properly centered by Metallic Rod Wiper
measuring from piston rod diameter. After mounting, the flange may When specified, metallic rod wipers can be supplied at extra cost,
be drilled for pins or dowels to prevent shifting. instead of the standard synthetic rubber wiperseal. Recommended
in applications where atmospheric particles or splashings tend to
Side Lug Mountings — Caution, cylinders which do not absorb
cling to the extended piston rod and otherwise damage the synthetic
force on their centerline (Group 3) tend to sway when under load.
rubber wiperseal. Installation of metallic rod wiper does not affect
Short stroke, non-centerline mounted cylinders can subject mounting
cylinder dimensions.
bolts to large tension forces which when combined with shear forces
can overstress standard mounting bolts. Side lug mounted cylinders
should always be prevented from shifting through use of shear keys
so located as to resist the major load, whether push or pull.

Atlas Cylinders
44 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Linear Alignment Couplers Atlas Series H

Linear Alignment Couplers are available in

View
Table of 19 standard thread sizes...
Contents
Cost Saving Features and Benefits Include...
 Maximum reliability for trouble-free operation,  Simplifying cylinder installation and reducing
long life and lower operating costs assembly costs
 Increased cylinder life by reducing wear on  Increase rod bearing and rod seal life for
piston and rod bearings lower maintenance costs

Alignment Coupler See Table 1 for Part Numbers and Dimensions

Table 1 — Part Numbers and Dimensions

Max.
Pull Approx.
Load Weight
Part No. A B C D E F G H J K M (lbs.) (lbs.)
5
RC-3-5 /16-24 11/8 13/4 15
/16 1
/2 1
/2 3
/8 3
/4 3
/8 15
/16 6° 1200 .35
3
RC-3-6 /8-24 11/8 13/4 15
/16 1
/2 1
/2 3
/8 3
/4 3
/8 15
/16 6° 2425 .35
7
RC-3-7 /16-20 13/8 2 11/8 3
/4 5
/8 1
/2 7
/8 3
/8 13/32 6° 3250 .55
1
RC-3-8 /2-20 13/8 2 11/8 3
/4 5
/8 1
/2 7
/8 3
/8 13/32 6° 4450 .55
5
RC-3-10 /8-18 13/8 2 11/8 3
/4 5
/8 1
/2 7
/8 3
/8 13/32 6° 6800 .55
3
RC-3-12 /4-16 2 25/16 15/8 11/8 15
/16 3
/4 15/16 7
/16 19/32 6° 9050 1.4
7
RC-3-14 /8-14 2 25/16 15/8 11/8 15
/16 3
/4 15/16 7
/16 19/32 6° 14450 1.4
RC-3-16 1-14 31/8 3 2 3 /8 15/8 17/16 11/4 17/8 3
/4 125/32 6° 19425 4.8
RC-3-20 11/4-12 31/8 3 2 3 /8 15/8 17/16 11/4 17/8 3
/4 125/32 6° 30500 4.8
RC-2-24 11/2-12 4 4 3 /8 21/4 21/4 13/4 11/2 115/16 7
/8 23/4 10° 45750 9.8
RC-2-28 13/4-12 4 4 3 /8 21/4 21/4 13/4 11/2 115/16 7
/8 23/4 10° 58350 9.8
RC-2-30 17/8-12 5 5 5 /8 3 3 21/4 115/16 2 5 /8 13/8 3 3 /8 10° 67550 19.8
RC-2-32 2-12 5 5 5 /8 3 3 21/4 115/16 2 5 /8 13/8 3 3 /8 10° 77450 19.8
RC-2-36 21/4-12 63/4 6 3 /8 31/4 31/2 23/4 2 3 /8 27/8 15/8 33/4 10° 99250 35.3
RC-2-40 21/2-12 7 61/2 4 31/2 31/4 27/8 3 3 /8 15/8 37/8 10° 123750 45.3
RC-2-44 23/4-12 7 61/2 4 31/2 31/4 27/8 3 3 /8 15/8 37/8 10° 150950 45.3
RC-2-48 3-12 7 61/2 4 31/2 31/4 27/8 3 3 /8 15/8 37/8 10° 180850 45.3
RC-2-52 31/4-12 91/4 81/2 51/4 41/2 4 3 3 /8 41/2 2 51/2 10° 213450 –
RC-2-68 41/4-12 127/8 111/4 73/4 41/2 51/2 47/8 7 11/2 83/4 10° 370850 –

How to Order Linear Alignment Couplers — When ordering a cylinder with a threaded male rod end, specify the
coupler of equal thread size by part number as listed in Table 1, i.e.; Piston Rod “KK” dimension is 3/4" - 16", specify
coupler part number RC-3-12.

Atlas Cylinders
45 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Cylinder Accessories Atlas Series H

Rod End Accessories Accessory Load Capacity

Accessories offered for the rod end of the cylinder include: Rod The various accessories on this and the following pages have
View Clevis, Eye Bracket, Rod Eye, Clevis Bracket and Pivot Pin. been load rated for your convenience. The load capacity, shown
Table of To select the proper part number for any desired rod mounted in the table below, is the recommended maximum load for that
Contents accessory, refer to the table below and look opposite the thread accessory based on a 4:1 design factor in tension. (Pivot Pin
size of the rod end as indicated in the first column. The Pivot is rated in shear.) Before specifying, compare the actual load
Pins, Eye Brackets and Clevis Brackets are listed opposite the or the tension (pull) force at maximum operating pressure of
pin diameter that fits their mating Rod Eyes or Clevises. the cylinder with the load capacity of the accessory you plan
to use. If load or pull force of cylinder exceeds load capacity of
accessory, consult factory.
Thread Size Pin Rod Clevis Mounting Plate or Eye Bracket Pivot Pin
Ø Part Load Forged Steel or Cast Ductile Iron Part Shear
Number1 Capacity Part Load Capacity (lb) Number Capacity
(lb) Number (lb)
7/16-20 0.500 JIC-40 4250 EB-195C2 4620 PP-368A 8600
1/2-20 0.500 JIC-41 4900 EB-195C2 4620 PP-368A 8600
3/4-16 0.750 JIC-42A 11200 EB-196C2 12370 PP-369A 19300
3/4-16 0.750 JIC-42 11200 EB-196C2 12370 PP-369A 19300
7/8-14 1.000 JIC-43A 18800 EB-197C2 20450 PP-370A 34300
1-14 1.000 JIC-44A 19500 EB-197C2 20450 PP-370A 34300
1-14 1.000 JIC-44 19500 EB-197C2 20450 PP-370A 34300
1 1/4-12 1.375 JIC-45A 33500 EB-198C2 33500 PP-371A 65000
1 1/4-12 1.375 JIC-45 33500 EB-198C2 33500 PP-371A 65000
1 1/2-12 1.750 JIC-46 45600 EB-199C2 49480 PP-372A 105200
1 3/4-12 2.000 JIC-47 65600 EB-200C2 70100 PP-373A 137400
1 7/8-12 2.000 JIC-48 65600 EB-200C2 70100 PP-373A 137400
2 1/4-12 2.500 JIC-49 98200 EB-201C2 98200 PP-374A 214700
2 1/2-12 3.000 JIC-50 98200 EB-202C2 121940 PP-375A 309200
2 3/4-12 3.000 JIC-51 98200 EB-202C2 121940 PP-375A 309200
3 1/4-12 3.500 JIC-52A 156700 EB-38C 187910 PP-545A 420900
3 1/2-12 4.000 JIC-53A 193200 EB-39C 268000 PP-547A 565800
4-12 4.000 JIC-54A 221200 EB-39C 268000 PP-547A 565800
1
Part numbers for Rod Clevises include pin and keepers.
2
Cylinder accessory dimensions conform to ANSI/NFPA/T3.6.8 R3-2010.

Forged Steel or Cast Ductile Iron Mounting Plate or Eye Bracket Dimensions3
Approx.
20° CB

M
ØDD ØCD ±.001
LR (4X)
FL
F
Note: Cast ductile iron eye
R R brackets must not be welded
E E in place.
Cast or Forged5 Pin CB CD DD E F FL LR M R
Part Number Ø Ø Ø (As Cast) (As Cast)
EB-195C 0.500 0.75 0.503 0.41 2.50 0.38 1.13 0.69 0.50 1.63
EB-196C 0.750 1.25 0.753 0.53 3.50 0.63 1.88 1.13 0.75 2.55
EB-197C 1.000 1.50 1.003 0.66 4.50 0.88 2.38 1.37 1.00 3.25
EB-198C 1.375 2.00 1.378 0.66 5.00 1.004 3.00 1.88 1.38 3.82
EB-199C 1.750 2.50 1.753 0.91 6.50 1.254 3.38 2.13 1.75 4.95
EB-200C 2.000 2.50 2.003 1.06 7.50 1.50 4.00 2.38 2.00 5.73
EB-201C 2.500 3.00 2.503 1.19 8.50 1.75 4.75 2.88 2.50 6.58
EB-202C 3.000 3.00 3.003 1.31 9.50 2.00 5.25 3.13 3.00 7.50
EB-38C 3.500 4.00 3.503 1.81 12.63 2.506 6.506 3.88 3.50 9.62
EB-39C 4.000 4.50 4.003 2.06 14.88 3.006 7.506 4.38 4.06 11.45
3
When used to mate with the Rod Clevis, select by pin diameter in the table above.
4
These dimensions vary from NFPA standard. F is increased by 0.13. Sufficient LR clearance remains for full swing arc with Atlas cap clevis cylinders and rod
clevises.
5
Eye Brackets with pin diameters 0.500 thru 1.375 are forged steel. Eye Brackets with 1.750 pin diameter and larger are cast ductile iron.
6
Mounting base thickness dimension F is increased on these sizes to provide greater load capacity than the former fabricated steel design. Cast ductile iron
dimensions F and FL are 0.81 larger for 3.500 pin diameter and 1.06 larger for 4.000 pin diameter.

Atlas Cylinders
46 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Cylinder Accessories Atlas Series H

Rod Clevis Dimensions Pivot Pin Dimensions

CW CB CW
ER
View
Table of ØCD ±.001
Contents CL
+.001
CE ØCD -.002

KK Thread

Part Number1, 2 Pin A CB CD CE CW ER KK Part Number CD CL

Ø Ø Thread Ø
JIC-40 0.500 0.75 0.77 0.503 1.50 0.49 0.50 7/16-20 PP-368A 0.500 1.88
JIC-41 0.500 0.75 0.77 0.503 1.50 0.49 0.50 1/2-20 PP-369A 0.750 2.63
JIC-42A 0.750 1.13 1.27 0.753 2.13 0.62 0.75 3/4-16 PP-370A 1.000 3.13
JIC-42 0.750 1.13 1.27 0.753 2.38 0.62 0.75 3/4-16 PP-371A 1.375 4.19
JIC-43A 1.000 1.63 1.52 1.003 2.94 0.74 1.00 7/8-14 PP-372A 1.750 5.19
JIC-44A 1.000 1.63 1.52 1.003 2.94 0.74 1.00 1-14 PP-373A 2.000 5.19
JIC-44 1.000 1.63 1.52 1.003 3.13 0.74 1.00 1-14 PP-374A 2.500 6.19
JIC-45A 1.375 1.88 2.04 1.378 3.75 0.99 1.38 1 1/4-12 PP-375A 3.000 6.25
JIC-45 1.375 2.00 2.04 1.378 4.13 0.99 1.38 1 1/4-12 PP-545A 3.500 8.25
JIC-46 1.750 2.25 2.54 1.753 4.50 1.24 1.75 1 1/2-12 PP-547A4 4.000 9.00
JIC-47 2.000 3.00 2.54 2.003 5.50 1.24 2.00 1 3/4-12 4
This size supplied with cotter pins.
JIC-48 2.000 3.00 2.54 2.003 5.50 1.24 2.00 1 7/8-12
1. Pivot Pins are furnished with Clevis
JIC-49 2.500 3.50 3.04 2.503 6.50 1.49 2.50 2 1/4-12 Mounted Cylinders as standard.
JIC-50 3.000 3.50 3.04 3.003 6.75 1.49 2.75 2 1/2-12 2. Pivot Pins are furnished with (2)
JIC-51 3.000 3.50 3.04 3.003 6.75 1.49 2.75 2 3/4-12 Retainer Rings.
JIC-52A 3.500 3.503 4.04 3.503 7.75 1.98 3.50 3 1/4-12 3. Pivot Pins must be ordered as a
JIC-53A 4.000 4.003 4.54 4.003 8.81 2.23 4.00 3 1/2-12 separate item if to be used with
JIC-54A 4.000 4.003 4.54 4.003 8.81 2.23 4.00 4-12 Rod Eyes, Rod Clevises, or
Clevis Brackets.
1
Rod Clevises with pin diameters 0.312 thru 1.375 are forged steel. Rod Clevises with 1.750 pin diameter and
larger are cast ductile iron.
2
Part numbers for Rod Clevises include pin and keepers.
3
Consult appropriate cylinder rod end dimensions for compatibility.

Atlas Cylinders
47 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Cylinder Accessories Atlas Series H

Rod End Accessories Accessory Load Capacity

Accessories offered for the rod end of the cylinder The various accessories have been load rated for your
View include Rod Clevis, Eye Bracket, Rod Eye, Clevis Bracket, convenience. The load capacity, shown in the table below, is the
Table of and Pivot Pin. To select the proper part number for any rod recommended maximum load for that accessory based on a
Contents
mounted accessory, refer to the table below and look in the row 4:1 design factor in tension. (Pivot Pin is rated in shear.) Before
to the right of the rod thread in the first column. The Pivot Pins, specifying, compare the actual load or the tension (pull) force at
Eye Brackets and Clevis Brackets are listed opposite the pin the maximum operating pressure of the cylinder with the load
diameter that fits their mating Rod Eyes or Clevises. capacity of the accessory you plan to use. If load or pull force of
cylinder exceeds load capacity of accessory, consult factory.

Thread Pin Rod Eye Clevis Bracket Pivot Pin

Size Ø Part Load Forged Steel or Fabricated Steel Part Shear
Number Capacity Cast Ductile Iron Number Capacity
(lb) Part Load Capacity Part Load Capacity (lb)
Number (lb) Number (lb)
7/16-20 0.500 REE-89 5000 CB-205C 7740 CB-205 7300 PP-368A 8600
1/2-20 0.500 REE-90 5700 CB-205C 7740 CB-205 7300 PP-368A 8600
3/4-16 0.750 REE-91 12100 CB-206C 13600 CB-206 10880 PP-369A 19300
7/8-14 1.000 REE-92 13000 CB-207C 23000 CB-207 15180 PP-370A 34300
1-14 1.000 REE-93 21700 CB-207C 23000 CB-207 15180 PP-370A 34300
1 1/4-12 1.375 REE-94 33500 CB-208C 39500 CB-208 23560 PP-371A 65000
1 1/2-12 1.750 REE-95 45000 CB-209C 49480 CB-209 21520 PP-372A 105200
1 3/4-12 2.000 REE-96 53500 CB-210C 72400 CB-210 26000 PP-215A 137400
1 7/8-12 2.000 REE-97W 75000 CB-210C 72400 CB-210 26000 PP-215A 137400
2 1/4-12 2.500 REE-98W 98700 CB-211C 98700 CB-211 28710 PP-374A 214700
2 1/2-12 3.000 REE-99W 110000 CB-212C 123300 CB-212 28190 PP-375A 309200
2 3/4-12 3.000 REE-100W 123300 CB-213C N/A CB-213 31390 PP-216A 309200
3 1/4-12 3.500 REE-36W 161300 CB-242C 200400 CB-242 80250 PP-545A 420900
3 1/2-12 3.500 REE-37W 217300 CB-242C 200400 CB-242 80250 PP-545A 420900
4-12 4.000 REE-38W 273800 CB-243C 292100 CB-243 98420 PP-547A1 565800
1
This size supplied with cotter pins.

Forged Steel or Cast Ductile Iron Clevis Bracket Dimensions

Approx.
20°
CW CB CW

M
ØCD ±.001
ØDD
LR (X4) Note: Cast ductile
FL
iron clevis brackets
F
R R
must not be welded
E E in place.
Cast or Pin CB CD CW DD E F FL LR M R
Forged 2, 3 Ø Ø Ø (As Cast) (As Cast)
Part Number
CB-205C 0.500 0.78 0.503 0.50 0.41 2.50 0.38 1.13 0.63 0.56 1.63
CB-206C 0.750 1.28 0.753 0.63 0.53 3.50 0.63 1.88 1.06 0.75 2.56
CB-207C 1.000 1.53 1.003 0.75 0.66 4.50 0.75 2.25 1.25 1.00 3.25
CB-208C 1.375 2.03 1.378 1.00 0.66 5.00 0.88 3.00 1.94 1.38 3.81
CB-209C 1.750 2.53 1.753 1.25 0.91 6.50 0.94 3.13 2.00 1.75 4.94
CB-210C 2.000 2.53 2.003 1.25 1.06 7.50 1.38 3.75 2.25 2.00 5.75
CB-211C 2.500 3.03 2.503 1.50 1.19 8.50 1.50 4.50 2.81 2.50 6.59
CB-212C 3.000 3.03 3.003 1.50 1.31 9.50 1.88 5.38 3.31 3.00 7.50
CB-242C 3.500 4.03 3.503 2.00 1.81 12.63 2.31 6.38 3.88 3.50 9.62
CB-243C 4.000 4.53 4.003 2.25 2.06 14.88 2.88 7.50 4.50 4.00 11.50
2
Clevis Brackets with pin diameters 0.500 thru 1.375 are forged steel. Clevis Brackets with 1.750 pin diameter and larger are cast ductile iron.
3
Part numbers for Clevis Brackets include pin and keepers.

Atlas Cylinders
48 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Cylinder Accessories Atlas Series H

Female Rod Eye Dimensions Pivot Pin Dimensions

ER Max. CB ER Max. CB
View
Table of CD CD CL
Contents ØCD ±.001 ØCD ±.001
+.001
ØCD -.002
CA KK Thread CA
A A KK Thread
LR Min.

JL
Thread Size thru 1 3/4-12 Thread Size 1 7/8-12 & Larger Part Number CD CL
Ø
Part Number Pin A CA CB CD ER JL LR KK
PP-368A 0.500 1.88
Ø Ø min Thread
PP-369A 0.750 2.63
REE-89 0.500 0.75 1.50 0.75 0.503 0.59 – – 7/16-20
PP-370A 1.000 3.13
REE-90 0.500 0.75 1.50 0.75 0.503 0.59 – – 1/2-20
PP-371A 1.375 4.19
REE-91 0.750 1.13 2.06 1.25 0.753 0.87 – – 3/4-16
PP-372A 1.750 5.19
REE-92 1.000 1.13 2.38 1.50 1.003 1.15 – – 7/8-14
PP-215A 2.000 5.69
REE-93 1.000 1.63 2.81 1.50 1.003 1.15 – – 1-14
PP-374A 2.500 6.19
REE-94 1.375 2.00 3.44 2.00 1.378 1.55 – – 1 1/4-12
PP-375A 3.000 6.25
REE-95 1.750 2.25 4.00 2.50 1.753 1.96 – – 1 1/2-12
REE-96 2.000 2.25 4.38 2.50 2.003 2.24 – – 1 3/4-12 PP-216A 3.000 6.75
REE-97W 2.000 3.00 5.00 2.50 2.003 2.24 3.00 2.77 1 7/8-12 PP-545A 3.500 8.25
REE-98W 2.500 3.50 5.81 3.00 2.503 2.76 3.50 3.09 2 1/4-12 PP-547A1 4.000 9.00
1
This size supplied with cotter pins.
REE-99W 3.000 3.50 6.13 3.00 3.003 3.30 4.00 3.58 2 1/2-12
REE-100W 3.000 3.63 6.50 3.50 3.003 3.30 4.00 3.58 2 3/4-12 1. Pivot Pins are furnished with Clevis
REE-36W 3.500 4.50 7.63 4.00 3.503 3.87 6.00 4.18 3 1/4-12 Mounted Cylinders as standard.
REE-37W 3.500 5.00 7.63 4.00 3.503 3.87 6.00 4.18 3 1/2-12 2. Pivot Pins are furnished with (2)
REE-38W 4.000 5.50 9.13 4.50 4.003 4.43 6.00 4.80 4-12 Retainer Rings.
3. Pivot Pins must be ordered as a
separate item if to be used with
Rod Eyes, Rod Clevises, or
Clevis Brackets.

Fabricated Steel Clevis Bracket Dimensions

CW CB CW
MR
M 25°
ØDD ØCD ±.001
LR (X4)
FL
F
R R
E E

Fabricated Steel Pin CB CD CW DD E F FL LR M MR R

Part Number2 Ø Ø Ø
CB-205 0.500 0.80 0.503 0.50 0.41 3.50 0.50 1.50 0.75 0.50 0.63 2.55
CB-206 0.750 1.30 0.753 0.63 0.53 5.00 0.63 1.88 1.19 0.75 0.91 3.82
CB-207 1.000 1.59 1.003 0.75 0.66 6.50 0.75 2.25 1.50 1.00 1.25 4.95
CB-208 1.375 2.09 1.378 1.00 0.66 7.50 0.88 3.00 2.00 1.38 1.66 5.73
CB-209 1.750 2.59 1.753 1.25 0.91 9.50 0.88 3.63 2.75 1.75 2.22 7.50
CB-210 2.000 2.59 2.003 1.50 1.06 12.75 1.00 4.25 3.19 2.25 2.78 9.40
CB-211 2.500 3.09 2.503 1.50 1.19 12.75 1.00 4.50 3.50 2.50 3.13 9.40
CB-212 3.000 3.09 3.003 1.50 1.31 12.75 1.00 6.00 4.25 3.00 3.59 9.40
CB-213 3.000 3.59 3.003 1.50 1.31 12.75 1.00 6.00 4.25 3.00 3.59 9.40
CB-242 3.500 4.09 3.503 2.00 1.81 15.50 1.69 6.69 5.00 3.50 4.13 12.00
CB-243 4.000 4.59 4.003 2.00 2.06 17.50 1.94 7.69 5.75 4.00 4.88 13.75
2
Part numbers for Clevis Brackets include pin and keepers.

Atlas Cylinders
49 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Dual Axis Knuckle Atlas Series H

Dual Axis Knuckle Dual Axis Knuckle Benefits

Using a Dual Axis Knuckle permits increased angular movement  Increased angular movement range compared to spherical
View from the cylinder center line. Clevis or Eye mounted cylinders bearing mount.
Table of often require movement beyond the plane that two pivot pins
 Significantly higher dynamic load rating than spherical
Contents allow. Spherical bearing mounts permit angular movement up to
bearing mount.
4.5° within the pivoting plane. A Dual Axis Knuckle, with two pin  Reduced bearing loads and wear that results from
holes 90° apart, installed at the cap and rod end of a mounting misalignment.
style PB2 cylinder adds two pivot points, thereby providing up
to 30° movement in another plane at each end.  Allows faster assembly of pivoting cylinders to the machine.

Maximum Achievable Angular Movement from Cylinder Centerline*

Inboard Pin -
15° maximum movement
for cylinder misalignment 15° 15°
only.

Outboard Pin -
30° maximum movement
when applying force to a load
moving in a curved plane. 30° 30°

CX
CX

*Maximum movement is achieved with cast clevis brackets. Movement is reduced when using fabricated clevis brackets.

Dual Axis Knuckle Dimensions and Usage

CX
LE ØCD ±.001
MR
MR

LR LR
CB CB

ØCD ±.001 LE

Part Pin Load CB CD CX LE LR MR Mating Parts

PB2 Mount Usage by
Number Ø Capacity Ø Series & Bore
(lb) Clevis Bracket Rod Clevis A&L H
0952670000 0.500 4380 0.75 0.503 0.88 0.54 0.63 0.50 CB-205C JIC-40, JIC-41 1.50, 2.00, 2.50 1.50
0952680000 0.750 12370 1.25 0.753 1.19 0.80 0.94 0.75 CB-206C JIC-42, JIC-42A 3.25, 4.00, 5.00 2.00, 2.50
JIC-43, JIC-44,
0952690000 1.000 20500 1.50 1.003 1.69 1.05 1.22 1.00 CB-207C 6.00, 7.00, 8.00 3.25
JIC-44A
0952700000 1.375 30500 2.00 1.378 2.38 1.44 1.69 1.38 CB-208C JIC-45, JIC-45A 10.00 4.00
0952710000 1.750 49500 2.50 1.753 3.06 1.81 2.19 1.75 CB-209C JIC-46 12.00 5.00
0952720000 2.000 68000 2.50 2.003 3.63 2.09 2.44 2.00 CB-210C JIC-47, JIC-48 14.00 6.00

Atlas Cylinders
50 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Spherical Bearing Mount – 11/2" to 6" Bores Atlas Series H

View
Table of
Spherical Bearings for Series H Cylinders
Contents Spherical Bearing Mount That Maintains Alignment
Through Push and Pull Strokes.

Benefits Are...
 Simplify installation of cylinder  Maintain alignment through push and pull strokes
 Reduce cylinder friction  Increase rod bearing and rod seal life
 Eliminate side loading in hard to align applications  Simplify machine design problems
 Increase cylinder life by reducing wear on piston
and rod bearings
 Save assembly time

Series H hydraulic cylinders are available with The bearing races are designed primarily for radial
spherical bearing mounts at both ends or head and loads and moderate misalignment not to exceed
cap end only. The bearing at the cap end is housed angle “a” as shown in Table 1 on the next page.
in a single stud ear welded to the cap to form an
The accessories, rod eye, pivot pin and clevis
integral structure. At the head end the bearing is
brackets are all designed to take maximum loading
mounted in a steel rod eye threaded to the piston
of the cylinder.
rod. Grease fittings are provided for lubrication.
The spherical bearing mount provides swivel
connections at both ends of the cylinder to reduce
misalignment problems and to maintain alignment
through push and pull strokes.

Atlas Cylinders
51 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Spherical Bearing Mount – 11/2" to 6" Bores Atlas Series H

Application and Design Data

The spherical bearing life is influenced by many factors, For longer bearing life, regular lubrication will protect the
View i.e., bearing pressure, load direction oscillating angle and spherical plain bearing from premature wear and corrosion.
Table of lubrication. The maximum operating pressure ratings of Rust-inhibiting EP greases of lithium/lead base, preferably
Contents the spherical bearing mountings are based on standard with molybdenum disulphide additives are particularly
commercial bearing ratings. The 4:1 design factor rating suited. The radial bearings have lubricating holes and
is based on the tensile strength of the material. grooves in the races permitting lubrication. The bearing
housings at the cap and rod end are provided with grease
The spherical bearings are dimensioned to ensure a
fittings for lubrication.
satisfactory bearing life under normal operating conditions.
The bearing races are made of through-hardened steel Maximum angle of swivel in relation to the center line of
and are precision ground. They are phosphate treated the pivot pin is shown as angle a in the table below. It
and coated with dry film lubricant to minimize friction is recommended that this angle is not exceeded when
of contacting surfaces. In the case of a permanent mounting the cylinder.
unidirectional load to the bearing, or other unusual
operating conditions, the use of a larger bearing may
be required.

Mounting Information
Head End Mounting Recommended maximum swivel angle on each side of
the cylinder centerline.

Table 1
Head End Mounted Cap End Mounted

a Bore Angle a Tan. of a Angle a Tan. of a

X
1
1 /2 2° .035 2° .035
X a
2 21/2° .044 41/2° .079
21/2 21/2° .044 41/2° .079
XL + STROKE
1
3 /4 3° .052 3° .052
4 1
2 /2° .044 3° .052
5 3° .052 3° .052
6 3° .052 3° .052
Note: Dimension X is the maximum off center mounting of the cylinder.
To determine dimension X for various stroke lengths multiply distance
between pivot pin holes by tangent of angle a. For extended position use
Cap End Mounting X = XL + 2X stroke.

a X

a X

XL + STROKE

Atlas Cylinders
52 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Spherical Bearing Mount – 11/2" to 6" Bores Atlas Series H

Cap Fixed Eye Mount

with Spherical Bearing
View Style SA
Table of
Contents ZC + STROKE

XC + STROKE MA LUBRICATION
FITTING

SL 1

2
4

MS
KK 3
NR
WF CD EX
A

Table 1 — Dimensions
Thread** Add Stroke
Rod Style Max.
Dia. 3 Oper.
Bore MM KK A WF XC ZC CD* EX MA MS NR SL PSI†
5 7 3 3 1
/ 8 /16 -20 /4 1 6 / 8 7 / 8
11/2 .5000 -.0005 7
/16 3
/4 15
/16 5
/8 3
/4 1500
3
1 /4-16 11/8 13 /8 63 /4 71/2
3
1 /4-16 11/8 13 /8 71/4 81/4
2 .7500 -.0005 21
/32 1 13 /8 1 11/4 2200
13 /8 1-14 15 /8 15 /8 71/2 81/2
3
1 /4-16 11/8 13 /8 7 3 /8 8 3 /8
21
21/2 13 /4 11/4-12 2 17/8 7 7 /8 87/8 .7500 -.0005 /32 1 13 /8 1 11/4 1450
13 /8 1-14 15 /8 15 /8 75 /8 8 5 /8
13 /8 1-14 15 /8 15 /8 8 5 /8 97 /8
31/4 2 11/2-12 21/4 2 9 101/4 1.0000 -.0005 7
/8 11/4 111/16 11/4 11/2 1500
13 /4 11/4-12 2 17/8 87/8 101/8
13 /4 11/4-12 2 17/8 93 /4 115 /8
4 21/2 17/8-12 3 21/4 101/8 12 1.3750 -.0005 13 /16 17/8 27/16 15 /8 21/8 1850
2 11/2-12 21/4 2 97 /8 113 /4
2 11/2-12 21/4 2 101/2 13
31/2 21/2-12 31/2 21/4 103 /4 131/4 1.7500 -.0005 117/32 21/2 2 7 /8 21/16 21/4 2000
5
21/2 17/8-12 3 21/4 103 /4 131/4
3 21/4-12 31/2 21/4 103 /4 131/4
21/2 17/8-12 3 21/4 121/8 145 /8
4 3-12 4 21/4 121/8 145 /8
6 2.0000 -.0005 13 /4 21/2 35 /16 2 3 /8 21/2 1800
3 21/4-12 31/2 21/4 121/8 145 /8
31/2 21/2-12 31/2 21/4 121/8 145 /8
† Maximum operating pressure at 4:1 design factor is based on tensile strength of material. Pressure ratings are based on standard commercial bearing
ratings.
* Dimension “CD” is hole diameter.
** To match pin diameter in rod eye and cap, when an oversize rod is required, specify rod end style ‘4’, ‘KK’ thread and ‘A’ thread length for the standard
rod diameter (first rod listed for the bore), and ‘W’ for the oversize rod. Order the rod eye and clevis bracket for the required bore size from the tables on
the spherical bearings accessory page.

Atlas Cylinders
53 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Spherical Bearing Mount / Accessories Atlas Series H

Atlas Cylinders offers a complete range of Cylinder Accessories mount cylinders include the Rod Eye, Pivot Pin and Clevis
to assure you of the greatest versatility in present or future Bracket. To select the proper part number for any desired
View cylinder applications. Accessories offered for spherical bearing accessory refer to the tables below.
Table of
Contents

Spherical Rod Eye Dimensions Bore Part CD A CE EX ERJK LEJL Load

ØCD EX Ø Number Ø Thread Ø Capacity
ER (Max)
(lb)
1.50 SB-1 .5000-0005 0.72 0.86 0.44 0.80 0.78 7/16-20 0.88 2644
Lube
Fitting 2.00 &
SB-2 .7500-0005 1.02 1.25 0.66 1.14 1.06 3/4-16 1.31 9441
2.50
LE
3.25 SB-3 1.0000-0005 1.52 1.88 0.88 1.34 1.45 1-14 1.50 16860
CE
4.00 SB-4 1.3750-0005 2.02 2.13 1.19 1.67 1.91 1 1/4-12 2.00 28562
5.00 SB-5 1.7500-0005 2.14 2.50 1.53 2.05 2.16 1 1/2-12 2.00 43005
6.00 SB-6 2.0000-0005 2.89 2.75 1.75 2.60 2.50 1 7/8-12 2.75 70193
A

JK ØJL
Thd
Order to fit Piston Rod Thread Size.

Pivot Pin Dimensions Bore Part CD CL Shear Capacity

Ø Number Ø (lb)
CL 1.50 PP-616 .4997-0004 1.56 8600
2.00 & 2.50 PP-624 .7497-0005 2.03 19300
ØCD 3.25 PP-632 .9997-0005 2.50 34300
4.00 PP-644 1.3746-0006 3.31 65000
5.00 PP-656 1.7496-0006 4.22 105200
6.00 PP-664 1.9996-0007 4.94 137400
Pivot Pins are furnished with (2) Retainer Rings.

Clevis Bracket Dimensions

CW CF CW CF CW
CW
MR
M M
ØCD ±.001 ØCD ±.001
ØDD
LR (X4) LR ØDD
FL FL (4X)
F F
R R R R
E E E E

Fabricated Steel Cast Ductile Iron

Order to fit Cylinder Cap or Rod Eye.

Bore Pin Cast Fabricated Steel CD CF CW DD E F FL LR M MR R Load

Ø Ø Ductile Iron Part Number1 Ø Ø Capacity
Part Number1 (lb)
1.50 0.500 SAB-1C SAB-1 0.503 0.45 0.50 0.41 3.00 0.50 1.50 0.94 0.50 0.63 2.05 5770
2.00 & 2.50 0.750 SAB-2C SAB-2 0.753 0.67 0.63 0.53 3.75 0.63 2.00 1.38 0.88 1.00 2.76 9450
3.25 1.000 SAB-3C SAB-3 1.003 0.89 0.75 0.53 5.50 0.75 2.50 1.69 1.00 1.19 4.10 14300
4.00 1.375 SAB-4C SAB-4 1.378 1.20 1 .00 0.66 6.50 0.88 3.50 2.44 1.38 1.63 4.95 20322
5.00 1.750 SAB-5C SAB-5 1.753 1.55 1.25 0.91 8.50 1.25 4.50 2.88 1.75 2.06 6.58 37800
6.00 2.000 SAB-6C SAB-6 2.003 1.77 1.50 0.91 10.63 1.50 5.00 3.00 2.00 2.38 7.92 50375
1
Part numbers for Clevis Brackets include pin and keepers.

Atlas Cylinders
54 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Piston Rod End “Style 5” Atlas Series H

View
Atlas “Style 5” Piston Rod End
Table of Split Flange Coupling Rod End
Contents

 Simplifies alignment
 Reduces assembly time
 Allows full rated hydraulic pressure in push
and pull directions
 Available in 5/8" through 10" piston rod diameters

Style 5 Rod End

AL G

AD VH

AE

B AM AF MM

R 1/16

VF
RT OR F
DEPENDING
ON MOUNTING

Dimensions Style 5 Rod End

MM Rod Dia. AD AE AF AM AL
5 5 1 3
/8 /8 /4 /8 .57 13/4
15 3 11
1 /16 /8 /16 .95 21/2
13/8 11/16 3
/8 7
/8 1.32 23/4
13/4 15/16 1
/2 11/8 1.70 31/8
2 111/16 5
/8 13/8 1.95 33/4
21/2 115/16 3
/4 13/4 2.45 41/2
3 27/16 7
/8 21/4 2.95 47/8
31/2 211/16 1 21/2 3.45 55/8
4 211/16 1 3 3.95 53/4
41/2 33/16 11/2 31/2 4.45 61/2
5 33/16 11/2 37/8 4.95 65/8 *
51/2 315/16 17/8 43/8 5.45 71/2 **
7 41/16 2 53/4 6.95 811/16
8 41/16 2 61/2 7.95 815/16
9 45/8 23/8 71/4 8.95 9 3/16
10 45/8 23/8 8 9.95 9 3/16

* AL = 7 5/16 for 5" diameter rod in 10" bore.

** AL = 87/16 for 51/2" diameter rod in 10" and 12" bores.
See previous catalog pages for B, F, G, RT, VF and VH per bore and rod diameter.

Atlas Cylinders
55 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Piston Rod End “Style 5” Atlas Series H

View
“Style 5” Piston Rod End
Table of Split Couplers and Weld Plates
Contents

C D
F BOLTS

Ø E
Ø A

Ø B

STYLE 5 ROD END

SPLIT COUPLER

WELD PLATE

WARNING: Piston rod separation from the machine member

can result in severe personal injury or even death to nearby personnel.
The cylinder user must make sure the weld holding the weld plate to
the machine is of sufficient quality and size to hold the intended load.
The cylinder user must also make sure the bolts holding split coupler
to the weld plate are of sufficient strength to hold the intended load
and installed in such a way that they will not become loose during the
machine’s operation.

Table 1 — Part Numbers and Dimensions

SPLIT WELD
ROD COUPLER PLATE
DIA. A B C D E F BOLT SIZE PART NO. PART NO.
5
/8 1.50 2.00 .50 .56 .250 4 #10-24 x .94 LG SC-062 WP-062
1 2.00 2.50 .50 .88 .250 6 .250-20 x 1.25 LG SC-100 WP-100
13/8 2.50 3.00 .63 1.00 .250 6 .312-18 x 1.50 LG SC-138 WP-138
13/4 3.00 4.00 .63 1.25 .250 8 .312-18 x 1.75 LG SC-175 WP-175
2 3.50 4.00 .75 1.63 .375 12 .375-16 x 2.25 LG SC-200 WP-200
21/2 4.00 4.50 .75 1.88 .375 12 .375-16 x 2.50 LG SC-250 WP-250
3 5.00 5.50 1.00 2.38 .375 12 .500-13 x 3.25 LG SC-300 WP-300
31/2 5.88 7.00 1.00 2.63 .375 12 .625-11 x 3.50 LG SC-350 WP-350
4 6.38 7.00 1.00 2.63 .375 12 .625-11 x 3.50 LG SC-400 WP-400
41/2 6.88 8.00 1.00 3.13 .375 12 .625-11 x 4.00 LG SC-450 WP-450
5 7.38 8.00 1.00 3.13 .375 12 .625-11 x 4.00 LG SC-500 WP-500
51/2 8.25 9.00 1.25 3.88 .375 12 .750-10 x 5.00 LG SC-550 WP-550
7 10.38 11.00 1.75 4.00 .500 12 1.00-8 x 5.50 LG SC-700 WP-700
8 11.38 12.00 2.00 4.00 .500 16 1.00-8 x 5.50 LG SC-800 WP-800
9 13.12 14.00 2.25 4.00 .500 12 1.25-7 x 6.00 LG SC-900 WP-900
10 14.12 15.00 2.50 4.50 .500 16 1.25-7 x 6.50 LG SC-1000 WP-1000
Note: Screws are not included with split coupler or weld plate.

Atlas Cylinders
56 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Push and Pull Forces Atlas Series H

Push and Pull Forces

Push Force and Displacement
View
Table of
Contents Cyl. Cylinder Push Stroke Force Displacement
Bore Piston Per Inch
Area In Pounds At Various Pressures
Size Of Stroke
(Inches) (Sq. In.) 25 50 65 80 100 250 500 1000 2000 3000 (Gallons)
11/2 1.767 44 88 115 142 177 443 885 1770 3540 5310 .00765
2 3.14 79 157 204 251 314 785 1570 3140 6280 9420 .0136
21/2 4.91 123 245 319 393 491 1228 2455 4910 9820 14730 .0213
31/4 8.30 208 415 540 664 830 2075 4150 8300 16600 24900 .0359
4 12.57 314 628 817 1006 1257 3143 6285 12570 25140 37710 .0544
5 19.64 491 982 1277 1571 1964 4910 9820 19640 39280 58920 .0850
6 28.27 707 1414 1838 2262 2827 7068 14135 28270 56540 84810 .1224
7 38.49 962 1924 2502 3079 3849 9623 19245 38490 76980 115470 .1666
8 50.27 1257 2513 3268 4022 5027 12568 25135 50270 100540 150810 .2176
10 78.54 1964 3927 5105 6283 7854 19635 39270 78540 157080 235620 .3400
12 113.10 2828 5655 7352 9048 11310 28275 56550 113100 226200 339300 .4896
14 153.94 3849 7697 10006 12315 15394 38485 76970 153940 307880 461820 .6664
16 201.06 5027 10053 13069 16085 20106 50265 100530 201060 402120 603180 .8704
18 254.47 6362 12724 16541 20358 25447 63618 127235 254470 508940 763410 1.1016
20 314.16 7854 15708 20420 25133 31416 78540 157080 314160 628320 942480 1.3600

Deductions for Pull Force and Displacement

Piston Rod Diameter Force In Pounds At Various Pressures
To determine Cylinder Pull Force or Displacement, deduct the following Force or
Piston Displacement corresponding to Rod Size, from selected Push Stroke Force or Displacement
Rod Piston Displacement corresponding to Bore Size in table above. Per Inch
Dia. Area Of Stroke
(Inches) (Sq. In.) 25 50 65 80 100 250 500 1000 2000 3000 (Gallons)
5
/8 .307 8 15 20 25 31 77 154 307 614 921 .0013
1 .785 20 39 51 65 79 196 392 785 1570 2355 .0034
13/8 1.49 37 75 97 119 149 373 745 1490 2980 4470 .0065
13/4 2.41 60 121 157 193 241 603 1205 2410 4820 7230 .0104
2 3.14 79 157 204 251 314 785 1570 3140 6280 9420 .0136
21/2 4.91 123 245 319 393 491 1228 2455 4910 9820 14730 .0213
3 7.07 177 354 460 566 707 1767 3535 7070 14140 21210 .0306
31/2 9.62 241 481 625 770 962 2405 4810 9620 19240 28860 .0416
4 12.57 314 628 817 1006 1257 3143 6285 12570 25140 37710 .0544
41/2 15.90 398 795 1034 1272 1590 3976 7952 15904 31808 47712 .0688
5 19.64 491 982 1277 1571 1964 4910 9820 19640 39280 58920 .0850
51/2 23.76 594 1188 1544 1901 2376 5940 11880 23760 47520 71280 .1028
7 38.49 962 1924 2502 3079 3849 9621 19243 38485 76970 115455 .1666
8 50.27 1257 2513 3267 4021 5027 12566 25133 50265 100530 150795 .2176
9 63.62 1590 3181 4135 5089 6362 15904 31809 63617 127234 190851 .2754
10 78.53 1964 3927 5105 6283 7854 19635 39270 78540 157080 235620 .3400

General Formula
The cylinder output forces are derived from the formula:
F = P x A
Where F = Force in pounds.
P = Pressure at the cylinder in
pounds per square inch, gauge.
A = Effective area of cylinder piston
in square inches.

Atlas Cylinders
57 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Operating Fluids and Temperature Range Atlas Series H

Operating Fluids and Temperature Range filled PTFE and compatible with all six classes of service. However, carbon filled PTFE
Fluidpower cylinders are designed for use with pressurized air, hydraulic oil and fire will provide better seal life when used with Class 6 fluids. A nitrile expander will be
resistant fluids, in some cases special seals are required. provided unless Class 3 or 5 seals are specified. In those cases the expander will be of
EPR or Fluorocarbon respectively. Note: It may be necessary to cycle the piston seals
View Class 1 Seals 40 or 50 times before achieving leakage free performance.
Table of Class 1 seals are the standard seals provided in a cylinder assembly. They are intended Lipseal Pistons
Contents for use with fluids such as: air, nitrogen, mineral base hydraulic oil or MIL-H-5606 within Lipseals with a back-up washers are standard in Series H cylinders and are often
the temperature range of -10°F (-23°C) to +165°F (+74°C). The individual seals may be
nitrile (Buna-N), enhanced polyurethane, polymyte, PTFE or filled PTFE. used for hydraulic applications when virtually zero static leakage is required. Lipseals
will function properly in these applications when used in conjunction with moderate
Class 2 (Nitrile) Seals hydraulic pressures. A high load piston option is recommended when operating at high
Class 2 seals are intended for use with water base fluids within the temperature of pressures and especially with large bore hydraulic cylinders.
-10°F (-23°C) to +165°F (+74°C) except for High Water Content Fluids (HWCF) in which Warning!
case Class 6 seals should be used. Typical water base fluids compatible with Class 2
seals are: Water, Water-Glycol, Water-in Emulsion, Houghto-Safe 27, 620 5040, Mobil The piston rod stud and the piston rod to piston threaded connections are secured
Pyrogard D, Shell Irus 905, Ucon Hydrolube J-4. Class 2 seals are nitrile. Lipseal will with an anaerobic adhesive which is temperature sensitive. Cylinders specified
have polymyte or PTFE back-up washer when required. O-rings will have nitrile back-up with fluorocarbon seals are assembled with anaerobic adhesive having a maximum
washers when required. temperature rating of +250°F (+121°C). Cylinders specified with all other seal
compounds are assembled with anaerobic adhesive have a maximum operating
Class 3 Seals — Ethylene Propylene (E.P.R.) Seals temperature rating +165°F (+74°C). These temperature limitations are necessary
Class 3 seals are intended for use with some Phosphate Ester Fluids between the to prevent the possible loosening of the threaded connections. Cylinders originally
temperatures of -10°F (-23°C) to +130°F (+54°C). Typical fluids compatible with Class manufactured with Class 1 seals (Nitrile) that will be exposed to ambient temperatures
3 seals are Skydrol 500 and 700. Class 3 seals are Ethylene Propylene. Lipseals will above +165°F (+74°C) must be modified for higher temperature service. Contact
have a PTFE back-up washer when required. O-rings will have EPR back-up washers the factory immediately and arrange for the piston to rod and the stud to piston rod
when required. Note: Class 3 seals are not compatible with mineral base hydraulic oil or connections to be properly reassembled to withstand the higher temperature service.
greases. Even limited exposure to these fluids will cause severe swelling. PTFE back-up Low Friction Hydraulic Seals
washer may not be suitable when used in
a radiation environment. Low Friction hydraulic seals are available as an option for both piston and piston rod
seals for Series H cylinders. They are sometimes used when a cylinder is controlled by
Class 4 Seals — Nitrile Seals servo or proportional valve. The seal assembly itself is a two piece assembly consisting
Class 4 seals are intended for low temperature service with the same type of fluids of a filled PTFE dynamic seal with an elastomer expander. A piston seal assembly
as used with Class 1 seals within the temperature range of -50°F (-46°C) to +150°F consists of one seal assembly in the middle of the piston with a filled PTFE wear ring on
(+66°C). Class 4 seals are nitrile seals. Lipseals will have leather, polymyte or PTFE each side of the piston. The piston rod seal assembly consists of two seal assemblies
back-up washers when required. O-rings will have nitrile back-up washers when and an elastomer wiper seal. The filled PTFE seals are compatible with Class 1, 2, 3,
required. Note: Certain fluids may react adversely with Class 4 seals compared to Class 4 & 5 fluids and provide virtually leak free sealing. The expanders and rod wiper will be
1 seals. nitrile unless Class 3 or 5 seals are specified. In those cases the expanders and wiper
will be EPR and fluorocarbon respectively. When specifying low friction seals specify if
Class 5 Seals — Fluorocarbon Seals piston, piston rod seals or both are required. Note: It may be necessary to cycle these
Class 5 seals are intended for elevated temperature service or for some Phosphate seals 40 or 50 times before achieving leakage free performance.
Ester Fluids such as Houghto-Safe 1010, 1055, 1120; Fyrquel 150, 220, 300, 350; Mobil
Pyrogard 42, 43, 53, and 55. Note: In addition, Class 5 seals can be used with fluids Cast Iron Piston Rings
listed below under Class 1 or Class 2 service. However, they are not compatible with Cast iron rings are optional piston seals for Series H cylinders. They offer the widest
Phosphate Ester Fluids such as Skydrols. Class 5 seals can operate with a temperature operating conditions by tolerating high operating pressures, wide temperature range
range of -10°F (-23°C) to +250°F (+121°C). Fluorocarbon seals may be operated to and are compatible with most fluids. The only drawback of cast iron rings is that they
+400°F (+204°C) with limited service life. For temperatures above +250°F (-121°C) the allow a small amount of leakage. The leakage for a 4" bore cylinder, operating at 2000
cylinder must be manufactured with non-studded piston rod thread and a pinned piston psi, with mineral base hydraulic fluid will be less than 10in.3/min. Leakage will increase
to rod connection. Class 5 seals are fluorocarbon seals. Lipseals will have PTFE back- as pressure, bore size and viscosity of the operating hydraulic fluid increases. For these
up washers. O-rings will have fluorocarbon back-up when required. reasons cast iron rings are not recommended when using water or Class 6 fluids.

Class 6 Seals Water Service

Class 6 seals are intended for High Water Content Fluids (HWCF) such as Houghton Series H hydraulic cylinders can be modified for water operation and supplied with
Hydrolubric 120B and Sonsol Lubrizol within the temperature range of +40°F (+4°C) to chrome-plated cylinder bore; electroless nickel-plated head, cap and piston; chrome-
+120°F (+49°C). Class 6 seals are special nitrile compound dynamic seals. Lipseals will plated precipitation hardened stainless steel piston rod, chrome-plated cushion
have PTFE and or polymyte back-up washers when required. O-rings will have nitrile plungers. When high water base fluids are the operating medium, hydraulic cylinders
back-up washers when required. Because of the viscosity of these fluids, cylinders are usually supplied with high water base rod wiper and seals. Water and high water
specified with Class 6 seals, will also be modified to have lipseal piston seals and base fluid operated cylinders are best used on short stroke applications or where high
straight cushions. pressure is applied only to clamp the load.

Class 8 Seals – Spring Loaded PTFE Seals Warranty

Class 8 seals consist of PTFE piston lipseals, rod lipseal and wiper lipseal, each with an Atlas will warrant cylinders modified for water or high water content fluid service to
internal stainless steel spring to energize both the static and dynamic sealing lips. They be free of defects in materials or workmanship, but cannot accept responsibility to
are intended for high temperature applications, to 400° F (204° C), where longer seal life premature failure due to excessive wear due to lack of lubricity or where failure is
and improved high temperature sealing performance is required. Body and gland o-ring caused by corrosion, electrolysis or mineral deposits within the cylinder.
seals will be fluorocarbon. Fluid resistance is comparable to Class 5.
Hi-Load Seals
Hi-Load seals consist of one or two filled PTFE dynamic piston seals with an elastomer
expander underneath. Hi-Load piston arrangement normally consists of a wear ring on
each end of the piston with the seals in the middle. These types of seals are virtually
leak free seals under static conditions and can tolerate high pres­­sure. The wear rings on
the piston can also tolerate high side loads. The dynamic portion of the seal is bronze

Class No. Typical Fluids Temperature Range

1 Standard Air, Nitrogen -10°F (-23°C) to
Nitrile Polyurethane Hydraulic Oil, Mil-H-5606 Oil +165°F (+74°C)
2 Optional Water, Water-Glycol, HWCF — See Class 6 below. -10°F (-23°C) to
Water base fluid seal Water-in-Oil Emulsion Houghto-Safe, 271, 620, 5040 +165°F (+74°C)
Mobil Pyrogard D, Shell Irus 905
Ucon Hydrolube J-4

3 Special (EPR) (At extra cost) Some Phosphate Ester Fluids -10°F (-23°C) to
Skydrol 500, 7000 +130°F (+54°C)
Note: Class 3 seals are not compatible with hydraulic oil.
4 Special (Nitrile) (At extra cost) Low Temperature Air or Hydraulic Oil -50°F (-46°C) to
+150°F (+66°C)
5 Optional (At extra cost) High Temperature See above paragraph on Fluorocarbon seals
(Fluorocarbon Seals) Houghto-Safe 1010, 1055, 1120 for recommended temperature range.
Fryquel 150, 220, 300, 550
Mobil Pyrogard 42,43,53,55
Note: Class 5 seals are not suitable for use with Skydrol fluid, but can be used with hydraulic oil if desired
6 Optional (HWCF) (At extra cost) Houghton, Hydrolubric 120B +40°F (+4°C) to
Sonsol Lubrizol, for other HWCF — consult factory. +120°F (+49°C)
8 Optional (At extra cost) See Class 5 Seals -15°F (-26°C) to
Spring Loaded PTFE 400°F (204°C)

Atlas Cylinders
58 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Pressure Ratings / Style 3 Minimum Stroke Atlas Series H

Application Data
The proper application of a fluid power cylinder requires mounting attitude, the speed of stroke, and how the load in
View motion will be stopped. Information given here provides pressure
Table of
consideration of the operating pressure, the fluid medium,
the mounting style, the length of stroke, the type of piston rod rating data for Series H hydraulic cylinders.
Contents
connection to the load, thrust or tension loading on the rod,

Series H Hydraulic Cylinders

Pressure Ratings Maximum Pressure Ratings
Standard operating fluid — clean, filtered hydraulic oil. Pressure
ratings for heavy-duty hydraulic cylinders are shown in the table. Rod 4:1* Heavy-Duty
Bore Size Diameter Design Factor Service
Series H hydraulic cylinders are recommended for pressures to (Inches) (Inches) (Tensile)(PSI) (PSI)
3000 psi for heavy-duty service with hydraulic oil. The 4:1 design 11/2 5
/8 2530 3000
factor ratings shown are based on tensile strength
2 1 2950 3000
of material and are for standard rod diameter only. The rating is
conservative for continuous severe applications. Design factors 21/2 1 2340 3000
at other pressures can be calculated from this rating. In addition, 31/4 13 /8 2250 3000
mounting styles, stroke, etc., should be considered because of 4 13 /4 2130 3000
the limiting effect they may have on these ratings. 5 2 2170 3000
6 21/2 2270 3000
7 3 2030 3000
8 31/2 2040 3000
10 41/2 2720 3000
12 51/2 2580 3000
14 7 2320 3000
16 8 2750 3000
18 9 2900 3000
20 10 2640 3000
* Applies to all mountings except Styles REF1, REF2, BEF2, TM1, TM2, TM3.

Rod End Style 3 Minimum Stroke

Sufficient clearance must exist between machining for female To maintain the required clearance, a minimum stroke is required
rod end style 3 and the threaded piston-to-rod connection. This for some bore and rod combinations. See the table below for
clearance is required to maintain pressure envelope integrity and minimum stroke requirements. Contact the factory when a style 3
envelope ratings shown above. rod end with a stroke shorter than shown in the table is required.

Rod Minimum Rod Minimum

Bore Dia. Stroke Bore Dia. Stroke
1.50 - 4.00 All None 10.00 4.500 1.13
5.00 2.000 None 5.000 1.38
2.500 1.00 5.500 2.00
3.000 1.38 7.000 3.13
3.500 1.63 12.00 5.500 1.25
6.00 2.500 None 7.000 2.38
3.000 1.38 8.000 3.13
3.500 1.38 14.00 7.000 2.00
4.000 2.00 8.000 2.75
7.00 3.000 1.25 10.000 4.25
3.500 1.50 16.00 8.000 1.75
4.000 1.50 9.000 2.50
5.000 3.13 10.000 3.25
8.00 3.500 1.50 18.00 9.000 1.50
4.000 1.50 10.000 2.25
5.000 2.88 20.00 10.000 1.25
5.500 3.63

Atlas Cylinders
59 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Cylinder Weights Atlas Series H

Cylinder Weights
To determine the net weight of a cylinder, first select the proper Table B. Weights of cylinders with intermediate rods may be
View basic weight for zero stroke, then calculate the weight of the estimated from table below by taking the difference between
Table of
cylinder stroke and add the result to the basic weight. For the piston rod weights per inch and adding it to the standard
Contents
extra rod extension use piston rod weights per inch shown in rod diameter weight for the cylinder bore size involved.

Table A Cylinder Weights, in pounds

Single Rod Cylinders Double Rod Cylinders
Basic Wt. Zero Stroke Basic Wt. Zero Stroke
Bore Rod FS, BEF2, BEF1, REF2, REF1, PB2, SL, TM1, TM2, Add Per Inch FS, REF2, REF1, SL, TM1, TM3, Add Per Inch
Size Dia. NM0, NM1, NM2, NM3 TM3, CL, ME6, ME5 of Stroke NM0, NM3, CL, ME5, of Stroke
1 1/2" 5/8" 7.8 9.0 .5 9.1 10.7 .6
1" 8.4 9.3 .6 9.7 10.8 .8
2" 1" 11.6 13.2 .8 14.6 16.8 1.0
1 3/8" 13.5 17.1 1.0 19.4 20.6 1.4
2 1/2" 1" 17.0 19.5 1.1 21.0 24.5 1.3
1 3/4" 22.5 25.5 1.5 27.0 30.0 2.2
1 3/8" 32.0 41.0 1.8 43.0 52.0 2.2
3 1/4" 2" 37.0 46.0 2.2 48.0 57.0 3.1
1 3/4" 48.0 53.0 2.5 59.0 63.0 3.2
4" 2 1/2" 52.0 58.0 3.2 92.0 97.0 4.6
2" 76.0 82.0 3.4 96.0 102.0 4.8
5" 3 1/2" 88.0 86.0 5.2 117.0 123.0 7.9
2 1/2" 125.0 133.0 5.2 153.0 159.0 6.6
6" 4" 133.0 140.0 7.3 182.0 190.0 10.9
7" 3" 233.0 242.0 6.7 320.0 339.0 8.7
5" 240.0 253.0 10.3 341.0 360.0 15.9
8" 3 1/2" 262.0 276.0 9.0 323.0 331.0 11.7
5 1/2" 300.0 309.0 13.0 390.0 411.0 19.7

Single Rod Cylinders Double Rod Cylinders

Basic Wt. Zero Stroke Basic Wt. Zero Stroke
Bore Rod TM3, Add Per Inch Add to All Add Per Inch
Size Dia. TM1, TM2 ME5, ME6 IH3, IH4 PB2, SL of Stroke Mtg. Styles, of Stroke
10" 4 1/2" 562 646 684 607 15 43 20
7" 620 704 742 665 21 101 32
12" 5 1/2" 924 1057 1136 1000 22 64 29
8" 1022 1155 1234 1097 29 162 43
14" 7" 1335 1520 1582 1485 28 101 39
10" 1496 1681 1743 1646 39 262 61

Single Rod Cylinders

Basic Wt. Zero Stroke Double Rod Cylinders
Bore Rod Add Per Inch Basic Wt. Zero Stroke Add Per Inch
Size Dia. ME5, ME6 IH3, IH4 PB2 of Stroke Add to All Mtg. Styles of Stroke
8" 2073 2257 2226 35 149 49
16" 9" 2122 2305 2275 39 198 57
10" 2181 2364 2334 43 257 65
9" 3165 3256 3330 45 198 63
18" 3224 3315 3390 50 257 72
10"
20" 10" 4231 4406 4551 57 257 79

Table B Piston Rod Weights, in pounds

Rod Dia. Rod Wt. Per Inch Rod Dia. Rod Wt. Per Inch Rod Dia. Rod Wt. Per Inch Rod Dia. Rod Wt. Per Inch
5/8" .09 2" .89 4" 3.56 7" 10.89
1" .22 2 1/2" 1.40 4 1/2" 4.51 8" 14.22
1 3/8" .42 3" 2.00 5" 5.56 10" 22.23
1 3/4" .68 3 1/2" 2.72 5 1/2" 6.72

Atlas Cylinders
60 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Ports Atlas Series H

Ports Table B
Series H cylinders can be supplied with SAE straight O-ring SAE Straight Thread O-Ring Ports
View ports or NPTF pipe thread ports. If specified on your order, Size Tube Thread Size Tube Thread
Table of extra ports can be provided on the sides of heads or caps that
Contents
No. O.D. (In.) Size No. O.D. (In.) Size
are not occupied by mountings or cushion valve.
1 5 3
2 /8 /16 - 24 12 /4 11/16 - 12
Standard port location is position 1 as shown on line drawings 3 3
/16 3
/8 - 24 — — —
in product catalog and Figure 1 below. Cushion adjustment 4 1
/4 7
/16 - 20 16 1 15 /16 - 12
needle and check valves are at positions 2 and 4 (or 3), 5 1
5 /16 /2 - 20 20 11/4 15 /8 - 12
depending on mounting style. Heads or caps which do not have 3 9
6 /8 /16 - 18 24 11/2 17/8 - 12
an integral mounting can be rotated and assembled with ports 1 3
at 90° or 180° from standard position. Mounting styles on which 8 /2 /4 - 16 32 2 21/2 - 12
5 7
head or cap can be rotated at no extra charge are shown in 10 /8 /8 - 14 — — —
Table A below. To order, specify by position number. In such Note: For the pressure ratings of individual connectors,
assemblies the cushion adjustment needle and check valve contact your connector supplier. Hydraulic cylinders applied
rotate accordingly since their relationship with port position with meter out or deceleration circuits are subject to intensified
does not change. pressure at the cylinder piston rod end. The rod end pressure
is approximately equal to:
Figure 1
Effective Cap End Piston Area
x Operating Pressure
1 Effective Rod End Piston Area

International Ports
4 2 Other port configurations to meet international requirements
are available at extra cost. Atlas Series H cylinders can be
supplied, on request, with British standard taper port (BSPT).
3 Such port has a taper of 1 in 16 measured on the diameter
Head (Rod) End Head Cap (1/16" per inch). The thread form is Whitworth System, and size
and number of threads per inch are as follows:
Table A
Table C
Port Position Available
British Standard Pipe Threads
Mounting Style Head End Cap End
NM1, NM2, NM3, REF2, Nominal No. Threads Pipe
BEF2, REF1, BEF1, TM3 1, 2, 3 or 4 1, 2, 3 or 4 Pipe Size Per Inch O.D.
1
ME6, TM2, PB2, SA 1,2, 3 or 4 1 or 3 /8 28 .383
1
/4 19 .518
ME5, TM1 1 or 3 1, 2, 3 or 4 3
/8 19 .656
SL, FS 1 1 1
/2 14 .825
3
/4 14 1.041
Ports can be supplied at positions other than those shown in
1 11 1.309
Table A at an extra charge. To order, specify port position as
shown in Figure 1. 11/4 11 1.650
11/2 11 1.882
2 11 2.347
Straight Thread Ports
The SAE straight thread O-ring port is recommended for British standard parallel internal threads are designated as
hydraulic applications. Atlas will furnish this port configuration BSPP and have the same thread form and number of threads
at positions shown in Table A. This port can also be provided at per inch as the BSPT type and can be supplied, on request, at
positions other than those shown in Table A at an extra charge. extra cost. Unless otherwise specified, the BSPP or BSPT port
SAE port size numbers are listed next to the NPTF pipe thread size supplied will be the same nominal pipe size as the NPTF
counterparts for each bore size in the respective product port for a given bore size cylinder.
catalogs. Size number, tube O.D., and port thread size for SAE
Metric ports can also be supplied to order at extra cost. See
ports are listed in Table B.
table below for standard port size for each bore.

Table D – Standard Port Sizes

F F
S N SAE Code I BSPT=B G S N SAE Code I BSPT=B G
Bore SAE NPTF 61 Flange ISO 6149 BSPP=R Metric Bore SAE NPTF 61 Flange ISO 6149 BSPP=R Metric
1 1/2 #8 1/2 N/A M22 x 1.5 1/2 M22 x 1.5 7 #20 1 1/4 1 1/4 M42 x 2 1 1/4 M42 x 2
2 #8 1/2 N/A M22 x 1.5 1/2 M22 x 1.5 8 #24 1 1/2 1 1/2 M48 x 2 1 1/2 M48 x 2
2 1/2 #8 1/2 1/2* M22 x 1.5 1/2 M22 x 1.5 10 #24 1 1/2 2 M48 x 2 1 1/2 M48 x 2
3 1/4 #12 3/4 3/4 M27 x 2 3/4 M27 x 2 12 #24 1 1/2 2 1/2 M48 x 2 1 1/2 M48 x 2
4 #12 3/4 3/4 M27 x 2 3/4 M27 x 2 14 #24 1 1/2 1 1/2 M48 x 2 1 1/2 M48 x 2
5 #12 3/4 3/4 M27 x 2 3/4 M27 x 2 16-20 #24 – 3 – – –
6 #16 1 1 M33 x 2 1 M33 x 2 *Available with 1 inch rod diameter only.

Atlas Cylinders
61 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Ports Atlas Series H

Oversize Ports Cylinders which are connected to a meter out flow control
Oversize NPTF or SAE straight thread ports can be with flow entering the cap end of a cylinder provided
View provided, at an extra charge. For ports one size larger by an accumulator may also experience damage to the
Table of than standard, welded port bosses which protrude from cushion bushing due to high instantaneous fluid flows.
Contents the side of the head or cap are supplied. For dimensions, This condition can be eliminated by using a meter in flow
see drawings and tables below. Series H cylinders control or “solid cushions” at cap end.
equipped with cushions at the cylinder cap end can P + STROKE
sustain damage to the cushion check valve (cushion
bushing) if excessive oil flow enters the cylinder from the A A
EE PORT
cap end port. Cylinders which are equipped with cap SIZE
end cushions and ordered with one size oversize ports
B
having hydraulic fluid flow exceeding 25 ft./sec. in the line
entering the cap end of the cylinder should be ordered
with a “solid cushion” at cap end. All cylinders ordered
C D
with double oversize ports should always be ordered with
a “solid cushion” at cap end.

Oversize NPTF Port Boss Dimensions Oversize SAE Straight Thread Port Boss Dimensions
Bore EE (NPTF) A (Dia.) B C D P Bore EE (SAE) A (Dia.) B C D P
11/2 3
/4 13/8 1 3
/4 25
/32 2 29/32 11/2 10* – – – – 2 7/8
3
2 /4 13/8 1 3
/4 25
/32 229/32 2 10* – – – – 2 7/8
21/2 3
/4 13/8 1 3
/4 25
/32 31/32 21/2 10* – – – – 3
31/4 1 13/4 13/16 29
/32 7
/8 317/32 31/4 16 13/4 13/16 7
/8 7
/8 37/16
4 1 13/4 13/16 29
/32 7
/8 325/32 4 16 13/4 13/16 7
/8 7
/8 311/16
5 1 13/4 13/16 29
/32 7
/8 49/32 5 16 13/4 13/16 7
/8 7
/8 43/16
6 11/4 21/4 15/16 11/8 11/8 51/8 6 20* – – – – 53/16
7 11/2 21/2 19/16 13/8 13/8 53/4 7 24* – – – – 51/2
8 2 3 111/16 11/2 11/2 61/2 8 N/A – – – – 61/4

Y P + STROKE
* Port tapped directly into head and cap.
Z UNC-2B THD.
A DIA. AA MIN. DEPTH
4 HOLES

Q
W

X
GG

Flange Ports (Code 61, 3000 psi) SAE 4 Bolt Flange Ports
SAE SAE
Bore Dash Bore Dash
Size No. Y A P Q W X Size No. Z AA GG
2 1/2†* 8 2.39 .50 2.97 1.50 .75 .34 2 1/2† 8 5/16 - 18 .81 .69
2.80
3 1/4† 12 3.17 .75 3.41 1.87 .94 .44 3 1/4† 12 3/8 - 16 .75 .87
3.05
3.05
4† 12 3.42 .75 3.66 1.87 .94 .44 4† 12 3/8 - 16 .75 .87
3.17
3.17
5† 12 3.42 .75 4.16 1.87 .94 .44 5† 12 3/8 - 16 .75 .87
3.42
3.42
6 16 3.52 1.00 4.58 2.06 1.03 .52 6 16 3/8 - 16 .87 1.03
7 20 3.70 1.25 5.59 2.31 1.16 .59 7 20 7/16 - 14 1.00 1.19
8 24 3.84 1.50 6.31 2.75 1.37 .70 8 24 1/2 - 13 1.06 1.41
† 2 1/2", 3 1/4", 4" & 5" bores cap-flange port not available on Style BEF1.
Style BEF2 not available at position 2 or 4. Port flange overhangs cap on Style ME6.
* 2 1/2" bore head flange port available with 1" and 1 3/8" rod only.

Atlas Cylinders
62 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Stroke Data, Stroke Adjusters Atlas Series H

Stroke Data Stroke Adjusters

Atlas cylinders are available in any practical stroke Where absolute precision in stroke length is required, a
View length. The following information should prove helpful screwed adjustable stop can be supplied. Several types
Table of to you in selecting the proper stroke for your cylinder are available – the illustration shows a design suitable
Contents
application. for infrequent* adjustment at the uncushioned cap end of
a cylinder. Please contact the factory, specifying details
Stroke Tolerances of the application and the adjustment required.
Stroke length tolerances are required due to buildup
of tolerances of piston, head, cap and cylinder tube.
Standard production stroke tolerances run +.031" to
W to 60" and SEAL FOR THREADS 1" & UP
-.015" up to 20" stroke, +.031" to -.020" for 21" STOP PIN
+.031" to -.031" for greater than 60" stroke. For closer
tolerances on stroke length, it is neces­sary to specify D-THREADS
the required tolerance plus the operating pressure and PD or

PA
PE
temperature at which the cylinder will operate. Stroke
tolerances smaller than .015" are not generally practical
due to elasticity of cylinders. If machine design requiresINTEGRAL KEY
such close tolerances, use of a stroke adjusterFA(below) J- WRENCH
SQUARE
may achieve the desired result.
SEAL FOR 1/2
& 3/4 THREADS
Tie Rod Supports L K (MIN.)

Bore L
Size D J K (Max.)
11/ 2 1
/ 2 - 20 5
/16 15
/16 5
3 7
2 /4 - 16 /16 11/ 4 8
21/ 2, 31/ 4 1 - 14 5
/8 111/ 16 9
4W 11/ 2 - 12 15
/16 2 1/ 8 18
5
5 2 - 12 1 /16 2 11/ 16 20
6 21/ 2 - 12 111/ 16 3 1/ 8 20
7 3 - 12 2 3 1/ 4 20
PD or

PA
PE

SEAL FOR THREADS 1" & UP8 31/ 2 - 12 2 3/ 8 3 1/ 2 20

STOP PIN
Rigidity of Envelope * Infrequent is defined by positioning the retract stroke in a couple
The prestressed tie rod construction of cylinders has of attempts
D-THREADS at originalINTEGRAL KEYThe frequent stroke
machine set-up.
adjusterPT
is recommended when adjustments may be required
advantages in rigidity within the limits of the cylinder by the end user.
tube to resist buckling. For long stroke cylinders within
practical limits. Tie rod supports (see table below) which
J- WRENCH
move the tie rod centerlines radially outward are used. SQUARE

SEAL FOR 1/2

Standard tie rod supports are kept within theL envelope & 3/4 THREADS
K (MIN.)
dimensions of the head and cap, and generally do not
interfere with mounting a long cylinder.
Stroke (Inches)
Supports Required

Bore 36 48 60 72 84 96 108 120 132 144 156 168

Number of

11/2 — — 1 1 1 2 2 2 3 3 3 4
2 — — — 1 1 1 W1 2 2 2 2 3
21/2 — — — — — 1 1 1 1 1 2 2
31/4 — — — — — — — 1 1 1 1 1
PD or

PA
PE

4 — — — — — — — — — 1 1 1
Note: 5" through 8" bore sizes — no supports required.
INTEGRAL KEY
PT

Atlas Cylinders
63 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Stop Tubing / Mounting Classes Atlas Series H

Stop Tubing Mounting Classes

Stop tube is recommended to lengthen the distance between Standard mountings for fluid power cylinders fall into three
View the rod bearing and piston to reduce bearing loads when basic groups. The groups can be summarized as follows:
Table of the cylinder is fully extended. This is especially true of
Contents horizontally mounted and long stroke cylinders. Long stroke Group 1 Straight Line Force Transfer with fixed mounts which
absorb force on cylinder centerline.
cylinders achieve additional stability through the use of a stop
Group 2 Pivot Force Transfer. Pivot mountings permit a
tube.
cylinder to change its alignment in one plane.
Drawing A (PISTON ROD) STOP PISTON Group 3 Straight Line Force Transfer with fixed mounts which
TUBE
(HEAD END) (CAP END) do not absorb force on cylinder centerline.
Because a cylinder’s mounting directly affects the maximum
pressure at which the cylinder can be used, the chart below
should be helpful in selection of the proper mounting
combination for your application. Stroke length, piston rod
connection to load, extra piston rod length over standard, etc.,
should be considered for thrust loads. Alloy steel mounting
bolts are recommended for all mounting styles, and thrust keys
NET are recommended for Group 3.
STROKE STOP TUBE LENGTH
GROSS STROKE
LG + GROSS STROKE
Group 1 FIXED MOUNTS which absorb force on cylinder centerline.
When specifying cylinders with long stroke and stop tube, be
sure to call out the net stroke and the length of the stop tube.
Machine design can be continued without delay by laying in a
cylinder equivalent in length to the NET STROKE PLUS STOP
TUBE LENGTH, which is referred to as GROSS STROKE. Heavy-Duty Service
For Thrust Loads Styles NM2, BEF1, ME6
For Tension Loads Styles NM3, REF1, ME5
Medium -Duty Service
For Thrust Loads Styles BEF1, BEF2
Drawing B (PISTON ROD) For Tension Loads Styles REF1, REF2
STOP PISTON
TUBE Light-Duty Service
(HEAD END) (CAP END) For Thrust Loads Style BEF2
For Tension Loads Style BEF1

Group 2 PIVOT MOUNTS which absorb force on cylinder centerline.

NET
STROKE STOP TUBE LENGTH
GROSS Heavy-Duty Service
STROKE For Thrust Loads Styles TM1, TM3
For Tension Loads Styles TM1, TM2, PB2, TM3
LG + GROSS STROKE
Medium-Duty Service
For Thrust Loads Style PB2
For Tension Loads Style PB2
This design is supplied on all non-cushion cylinders.
Group 3 FIXED MOUNTS which do not absorb force on the centerline.

Heavy-Duty Service
For Thrust Loads Style SL
For Tension Loads Style SL
Medium-Duty Service
For Thrust Loads Style FS
For Tension Loads Style FS

Atlas Cylinders
64 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Piston Rod Selection Chart Atlas Series H

How to Use the Chart

The selection of a piston rod for thrust (push) conditions C) If required length of stop tube is in the region labeled
View requires the following steps: “consult factory,” submit the following information for an
Table of 1. Determine the type of cylinder mounting style and rod end individual analysis:
Contents connection to be used. Then consult the chart below and 1) Cylinder mounting style.
find the “stroke factor” that corresponds to the conditions 2) Rod end connection and method of guiding load.
used.
3) Bore, required stroke, length of rod extension (Dim.
2. Using this stroke factor, determine the “basic length” from “LA”) if greater than standard, and series of cylinder
the equation: used.
Basic = Actual x Stroke
Length Stroke Factor 4) Mounting position of cylinder. (Note: If at an angle or
vertical, specify direction of piston rod.)
The graph is prepared for standard rod extensions beyond
5) Operating pressure of cylinder if limited to less than
the face of the rod gland retainers. For rod extensions
standard pressure for cylinder selected.
greater than standard, add the increase to the stroke in
arriving at the “basic length.”
3. Find the load imposed for the thrust application by Warning
multiplying the full bore area of the cylinder by the system Piston rods are not normally designed to absorb bending moments or
loads which are perpendicular to the axis of piston rod motion. These
pressure.
additional loads can cause the piston rod end to fail. If these types of
4. Enter the graph along the values of “basic length” and additional loads are expected to be imposed on the piston rods, their
“thrust” as found above and note the point of intersection: magnitude should be made known to our Engineering Department so
A) The correct piston rod size is read from the diagonally they may be properly addressed. Additionally, cylinder users should
always make sure that the piston rod is securely attached to the
curved line labeled “Rod Diameter” next above the point
machine member.
of intersection.
B) The required length of stop tube is read from the right
of the graph by following the shaded band in which the
point of intersection lies.

Recommended Mounting Styles for Rod End Stroke

Maximum Stroke and Thrust Loads Connection Case Factor
Groups 1 or 3 Fixed and Rigidly .50
Long stroke cylinders for thrust loads should be mounted Guided I
using a heavy-duty mounting style at one end, firmly fixed
and aligned to take the principal force. Additional mounting
should be specified at the opposite end, which should be
used for alignment and support. Pivoted and Rigidly
II .70
Guided
An intermediate support may also be desirable for long
stroke cylinders mounted horizontally. See “Tie Rod
Supports — Rigidity of Envelope” for a guide. Machine
mounting pads can be adjustable for support mountings to Supported but not III 2.00
achieve proper alignment. Rigidly Guided

Group 2 Pivoted and Rigidly IV 1.00

Style TM1 — Trunnion on Head Guided

Style TM3 — Intermediate Trunnion Pivoted and Rigidly V

Guided 1.50

Style TM2 — Trunnion on Cap or Pivoted and Rigidly

Style PB2 — Clevis on Cap VI 2.00
Guided

Atlas Cylinders
65 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Piston Rod Selection Data Atlas Series H

Piston Rod — Stroke Selection Chart

View 11/2" through 8" Bore ROD DIAMETER

Table of
Contents 1 3
8 13
4 2 2 1
2 3 312 4 412 5 512

CONSULT FACTORY
300

200

1
BASIC LENGTH–INCHES

100
90 7
80 6
70
5
60
4
50 3
40 2

30
5 1
8

STOP TUBE
INCHES OF
20

10
100 2 3 4 5 6 7 8 9 1000 2 3 4 5 6 7 8 9 10,000 2 3 4 5 6 7 8 9 100,000 2 3
THRUST–POUNDS

Piston Rod — Stroke Selection Chart

10" through 20" Bore

ROD DIA.

5 5 1/2 7 8 9 10
300
CONSULT FACTORY

4 1/2

200
BASIC LENGTH—INCHES

100
7
90
80 6
70 5
4
60
3
50 2
40 1

30
STOP TUBE
INCHES OF

20
15,000 2 2.5 3 4 5 6 7 8 9 100,000 2 3 4 5 6 7 8 9
THRUST-POUNDS

Atlas Cylinders
66 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Rod Gland Drain / Thrust Key Mountings Atlas Series H

Rod Gland Drain Thrust Key Mountings

Rod gland drains permit capture of fluid that may Thrust key mountings eliminate the need of using
View accumulate between the primary rod seal and the fitted bolts or external keys on side mounted cylinders.
Table of wiperseal. A 1/8 NPTF port is provided in the gland Cylinder Styles SL and FS can be provided with the
Contents
retainer or cylinder head (see table below) for connection gland retainer plate extended below the mounting side
of plumbing that flows oil back to the reservoir. Use of the cylinder (see illustration below). This extended
of translucent tubing as the drain to reservoir line can retainer plate can then be fitted into a keyway milled into
provide visual indication of a need for rod seal service the mounting surface of the machine member.
when the cylinder gland is not easily visible within the
equipment. Specify rod gland drain port option and the W

drain port location, position 1, 2, 3, or 4.

Drain Port Location

NM2, BEF1, BEF2, NM1,
ME6, SL, FS, TM1, NM3, PD
PA
TM2, PB2, TM3, REF1,
Bore Rod Dia. SA REF2 ME5
5/8 Head Head Head
1 1/2 FA INTEGRAL KEY
1 Full Retainer Full Retainer Head
1 Bolted Retainer Full Retainer Head
2
1 3/8 Full Retainer Full Retainer Head
1 - 1 3/8 Bolted Retainer Head Head +.000" -.001" Dim. PD
2 1/2
1 3/4 Bolted Retainer Full Retainer Head Bore Dim. FA Dim. PA Styles SL, FS
3 1/4 All Bolted Retainer Head Head 11/2 .361 3
/16 17/16
4 All Bolted Retainer Head Head 2 .611 5
/16 113/16
2-3 Bolted Retainer Head Head 21/2 .611 5
/16 21/16
5
3 1/2 Bolted Retainer Full Retainer Head 31/4 .736 3
/8 25/8
6-8 All* Bolted Retainer Head Head 4 .861 7
/16 215/16
* On 51/2" diameter piston rods, with drain in position 2 or 4, the port 5 .861 7
/16 311/16
will be offset 18 degrees clockwise from the position specified. 6 .986 1
/2 41/4
Note: When a key retainer and rod gland drain are specified the port 8 .986 1
/2 51/4
location will be the same as mounting styles NM1, NM3, etc.

The full square retainer, key retainer, or mounting

flange thickness is increased on three bore and rod
combinations. The piston rod is extended on NM1, NM3,
REF1, and REF2 mounts to provide the standard ‘W’
dimension.
Bore Rod Dia. Retainer or Mounting Flange Thickness
1 1/2 1 5/8
2 1 3/8 3/4
2 1/2 1 3/4 7/8

Atlas Cylinders
67 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Magnaswitch Atlas Series H

End of Stroke Magnetic Principle Type Switch Extension in Inches

View Rod
Table of
Contents
Proximity Switch Bore

1 1/2
Dia.
5/8
HR
3 7/16
HB

3 5/16
Reliable: Proximity type sensor never contacts cylinder 1 3 5/8
moving parts; eliminating wear and adjustments. 1 3 7/16
2 3 1/4
1 3/8 3 5/8
Positive Action: Multiple magnet design provides “snap 1 3 1/4
action.” Eliminates creep and false signals. 2 1/2 1 3/8 3 7/16 2 15/16
1 3/4 3 5/8
Versatile: Sealed stainless steel switch body can be used 1 3/8 2 15/16
with any operating fluid and is impervious to most environmental 3 1/4 1 3/4 3 1/8 2 9/16
conditions. 2 3 5/16
1 3/4 2 7/8
4 2 3 1/16 2 7/16
2 1/2 3 3/8
2 2 1/4
2 1/2 2 5/8
5 2 5/16
3 2 7/8
3 1/2 3 1/8
2 1/2 2 1/8
3 2 3/8
6 3
3 1/2 2 5/8
4 2 7/8
3 3 3/8
3 1/2 2 1/8
7 2 11/16
4 2 3/8
5 2 15/16
3 1/2 3 1/8
4 3 3/8
8 2 1/4
5 3 5/8
5 1/2 2 5/8
OPERATING PRINCIPLE
Magnet Ass’y Switch Case Connecting Rod
Differential
Switch Options N/O N/O
Sensing Ferrous
Quick disconnect. Area
N
N/C Actuator
N
N/C
Explosion proof. Com. Com.
Sub sea, to 2000 feet depths. Sensing
Extra-long leads. Distance Unoperated Operated
As shown in the sketches above, these
switches are magnetically operated. Dual Specifications
magnets provide a dependable “snap action”
for positive position sensing.
In the “unoperated” position, the magnet Switch Type: Temperature Range:
assembly is attracted in the direction of the Magnetic Principle -20°F to + 200°F (UL 104°F. Max.)
arrow, causing a finely ground stainless steel Contacts: Sensing Gap:
connecting rod to hold the contacts open. Single Pole-Double Throw (SPDT) .030 to .060 inch
In the “operated” position a ferrous part Contact Rating*: Trip Point: Factory Set with Piston
(cushion or piston) enters the sensing area 2 Amp at 110-240 VAC (UL & CSA) Bottomed out
and attracts the magnet assembly which 100 MA at 12 VDC 50 MA at
causes the rod to draw the contacts closed. Release Point: Approximately 1/4"
24 VDC (CSA)
Piston Travel
How to Order: Note: Check current draw of
solenoid valves. Min. Cyl. stroke 1/2" on 11/2" & 2" bore,
3
To order switches, enter an “S” in the Options /4" stroke on 21/2" and up.
field of the cylinder model code. Describe the Connection: 36" long, 3 wire,
potted in cable. Can be wired *UL and CSA approved for industrial
modification in notes by specifying:
Normally Open or Normally Closed. control, general purpose use. If
1. Magnaswitch Class I, Division 1 or 2 is required,
Leads are tagged (Com, N/O, N/C)
2. Installation in head, cap, or both ends please specify.
of the cylinder Pressure Rating: 3000 PSI
3. Location in the head or cap (position #1, Non Shock
2, 3, or 4) not occupied by a port or
mounting

Atlas Cylinders
68 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Parts List / Piston and Rod Assemblies Atlas Series H

11/2" through 6" Bore Sizes

View
Table of 1 15 74
Contents 47 73
42 44
27

122

71 19

72
18 70 23
69 37
17

16

121 119 48

120

Parts List — 1 1/2" through 6" Bore Sizes 118

HI-LOAD OPTIONAL RING
Symbol Description TYPE PISTON
PISTON
1 Head
7 Cap
15 Cylinder tube Piston and Rod Assemblies
16 Piston, ring type Factory assembled piston and rod assemblies
17 Piston, lipseal type (that include seals for piston type specified) are
18 Cushion plunger, rod head cushion recommended.
19 Tie rod
23 Tie rod nut
27 Retainer
37 Piston rod, single rod type
42 Lipseal, piston
44 Back-up washer, piston
47 O-ring, cylinder tube to head and cap seal
48 Piston ring, iron
69 O-ring, cushion adjustment and check valve plug screw
70 Needle, cushion adjustment valve
71 Ball, cushion check valve
72 Plug screw, cushion check valve
73 Bushing, float check, cushion on cap end
74 Retaining ring, float check cushion bushing
118 Piston, Hi-Load type
119 Outer Ring
120 Inner Ring
121 Wear Ring
122 Retainer bolt

Atlas Cylinders
69 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Parts Identification / Seal Kits Atlas Series H

11/2" through 6" Bore Sizes

41 43
View 47 42 44 47
Table of 40 45
Contents
14

Symbol Description
14 Rod Gland
40 Rod Wiper 48
41 Rod Seal 121 119
42 Piston Lipseal
43 Rod Seal Back-up Washer
44 Piston Seal Back-up Washer
45 Gland to head o-ring
47 End seal o-ring
48 Piston ring 120
119 Outer Ring
120 Inner Ring
121 Wear Ring HI-LOAD OPTIONAL RING
PISTON TYPE PISTON

Seal Kits Rod Gland and Rod Seal Kits

See Operating Fluids and Temperature Range Page for compatibility.
Class 1 Polyurethane & Buna-N Retainer Bolt
Rod Gland Rod Seal Kits Torque
Piston Seal Kits
Kits (Contains: (Torque values
Class 1 & 2 Buna-N Rod 1 Each Sym.
(Contains: 1 Each are for bolts
Piston Lipseal Piston Ring Hi-Load Piston Poly Flex Tie Rod Nut Dia. #40, 41, & 45) installed with
Sym. #14, 40, 41,
1 lubrication.)
Bore Kits Kits Seal Kits Piston Seal Kits Torque & 45)

Size (Contains: 2 Each (Contains: 4 Each (Contains: 2 Each (Contains: 2 Each 5/8 PH06RH000 PH06SH000 56 - 58 lb-in
Sym. #42, 44, Sym. #48 & Sym. #47 119, 120, Sym. #42, 44, & 47) 1 PH10RH000 PH10SH000 56 - 58 lb-in
& 47) 2 Each Sym. #47) & 121)
1 3/8 PH13RH000 PH13SH000 56 - 58 lb-in
1 3/4 PH17RH000 PH17SH000 56 - 58 lb-in
1 1/2 PH00LH015 PH00CH015 PH00KH015 UH00MH015 18 - 19 lb-ft
2 PH20RH000 PH20SH000 11 - 12 lb-ft
2 PH00LH020 PH00CH020 PH00KH020 UH00MH020 45 - 49 lb-ft
2 1/2 PH25RH000 PH25SH000 11 - 12 lb-ft
2 1/2 PH00LH025 PH00CH025 PH00KH025 UH00MH025 45 - 49 lb-ft
3 PH30RH000 PH30SH000 41 - 43 lb-ft
3 1/4 PH00LH032 PH00CH032 PH00KH032 UH00MH032 120 - 124 lb-ft
3 1/2 PH35RH000 PH35SH000 41 - 43 lb-ft
4 PH00LH040 PH00CH040 PH00KH040 UH00MH040 131 - 135 lb-ft
4 PH40RH000 PH40SH000 41 - 43 lb-ft
5 PH00LH050 PH00CH050 PH00KH050 UH00MH050 312 - 316 lb-ft
6 PH00LH060 PH00CH060 PH00KH060 UH00MH060 528 - 544 lb-ft
Class 5 Fluorocarbon Retainer Bolt
Class 5 Fluorocarbon Rod Gland Rod Seal Kits Torque
Kits (Contains: (Torque values
Piston Lipseal Piston Ring Hi-Load Piston Tie Rod Nut Rod 1 Each Sym. #40,
(Contains: 1 Each are for bolts
Bore Kits Kits Seal Kits Torque1 Dia. 41, 432, installed with
Sym. #14, 40, 41,
Size (Contains: 2 Each (Contains: 4 Each (Contains: 2 Each & 45)
432, 45) lubrication.)
Sym. #42, 44, & Sym. #48 & Sym. #47 119, 120,
47) 2 Each Sym. #47) & 121)
5/8 VH06RH000 VH06SH000 56 - 58 lb-in
1 VH10RH000 VH10SH000 56 - 58 lb-in
1 1/2 VH00LH015 VH00CH015 VH00KH015 18 - 19 lb-ft 1 3/8 VH13RH000 VH13SH000 56 - 58 lb-in
2 VH00LH020 VH00CH020 VH00KH020 45 - 49 lb-ft 1 3/4 VH17RH000 VH17SH000 56 - 58 lb-in
2 1/2 VH00LH025 VH00CH025 VH00KH025 45 - 49 lb-ft 2 VH20RH000 VH20SH000 11 - 12 lb-ft
3 1/4 VH00LH032 VH00CH032 VH00KH032 120 - 124 lb-ft 2 1/2 VH25RH000 VH25SH000 11 - 12 lb-ft
4 VH00LH040 VH00CH040 VH00KH040 131 - 135 lb-ft 3 VH30RH000 VH30SH000 41 - 43 lb-ft
5 VH00LH050 VH00CH050 VH00KH050 312 - 316 lb-ft 3 1/2 VH35RH000 VH35SH000 41 - 43 lb-ft
6 VH00LH060 VH00CH060 VH00KH060 528 - 544 lb-ft 4 VH40RH000 VH40SH000 41 - 43 lb-ft
1 2
When assembling the cylinder, be sure to torque the tie rods evenly. Item 43 not required for 5/8" & 1" rod diameter.

Atlas Cylinders
70 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Parts Identification / Seal Kits Atlas Series H

7" and 8" Bore Sizes

View 45 26 47 26
Table of 47
Contents
41 43

40

14

120 119 121

Parts Identification
Sym. Sym.
No. Description No. Description
14 Rod Bearing 47 End Seal O-Ring
40 Rod Wiper 48 Piston Ring
41 Rod Seal 62 Bushing Kit
43 Rod Seal Back Up Washer 119 Outer Ring
26 End Seal Back Up Washer 120 Inner Ring
45 Gland to Head O-Ring 121 Wear Ring

Rod Gland and Rod Seal Kits

Class 1 Polyurethane & Buna-N Class 5 Service Fluorocarbon Retainer Bolt
Rod Rod Gland Kits Rod Seal Kits Rod Gland Kits Rod Seal Kits Torque
(Contains: 1 Each (Contains: 1 Each Sym. (Contains: 1 Each Sym. (Contains: 1 Each Sym. (Torque values are for
Dia.
Sym. #14, 40, 41, #40, 41, #14, 40, 41, 43, #40, 41, 43, bolts installed with
& 45) & 45) & 45) & 45) lubrication.)
3 PH30RH000 PH30SH000 VH30RH000 VH30SH000 41 - 43 lb-ft
3 1/2 PH35RH000 PH35SH000 VH35RH000 VH35SH000 41 - 43 lb-ft
4 PH40RH000 PH40SH000 VH40RH000 VH40SH000 41 - 43 lb-ft
5 PH50RH000 PH50SH000 VH50RH000 VH50SH000 41 - 43 lb-ft
5 1/2 PH55RH000 PH55SH000 VH55RH000 VH55SH000 41 - 43 lb-ft

Piston Seal Kits

Class 1 & 2 Buna-N Class 5 Fluorocarbon
Piston Ring Kits Hi-Load Piston Poly Flex Piston Piston Ring Kits Hi-Load Piston
Bore (Contains: Seal Kits Seal Kits (Contains: Seal Kits Tie Rod Nut
4 Each Sym. #48 & 4 Each Sym. #48 &
Size (Contains: 2 Each (Contains: 2 Each (Contains: 2 Each Torque1
2 Each Sym. #26 Sym. #26, 47, & 121 Sym. #26, 42, 44, 2 Each Sym. #26 Sym. #26, 47, & 121
& 47) 2 Each Sym. #119 & 47) & 47) 2 Each Sym. #119
& 120) & 120)
7 PH00CH070 PH00KH070 UH00MH070 VH00CH070 VH00KH070 800 - 816 lb-ft
8 PH00CH080 PH00KH080 UH00MH080 VH00CH080 VH00KH080 1168 - 1184 lb-ft
1
When assembling the cylinder, be sure to torque the tie rods evenly.

Atlas Cylinders
71 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Parts Identification Atlas Series H

10" through 20" Bore Sizes

View
Table of
Contents

117 45 1 26 47 15 37 18 46A 118 121 119 120 55 47 26 7 123 23

27
41
43

40

122 71 69 72 19 138 136 137 69 70

Sym. No. Sym. No.

1 Head 48 Piston Ring
7 Cap 55 Piston Lock Pin
15 Cylinder Body 69 O-Ring, Cushion Adj. & Check Screws
16 Piston Body – Ring Type Piston 70 Cushion Adjusting Needle Screw
18 Cushion Sleeve 71 Check Valve Ball
19 Tie Rod 72 Check Valve Screw
23 Tie Rod Nut – Non-Locking 117 Rod Bearing
26 Back-Up Washer, Cylinder Body 118 Piston Body – Hi-Load
27 Retainer 119 Outer Piston Ring
37 Piston Rod 120 Inner Piston Ring
40 Wiperseal 121 Wear Ring
41 Rod Seal (Polypak) 122 Retainer Bolt
43 Back-Up Washer, Polypak 123 Washer, Tie Rod Nut
45 O-Ring, Gland to Head 136 Spacer, Cushion
46A Cushion Sealing Ring 137 Cushion Spear, Detachable
47 O-Ring Cylinder Body 138 Bolt, Cushion Spear

Atlas Cylinders
72 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Parts Identification/Seal Kits Atlas Series H

10" through 20" Bore Sizes

16 48
View
Table of
Contents Optional Cast Iron
Piston Ring Kit

Operating fluids and temperature range – Fluidpower Fluorocarbon seals

cylinders are designed for use with pressurized air, hydraulic Fluorocarbon seals can be supplied, on request, and are
oil and fire resistant fluids, in some cases special seals are especially suitable for some fire resistant fluids as shown in
required. the table on page 57 or for elevated temperature service.
Buna-N When using Fluorocarbon seals for high temperature service or
Buna-N seals are supplied on all standard pneumatic and fluid compatibility within a temperature range of -10°F (-23°C) to
hydraulic cylinders. They are suitable for use with pressured +250°F (+121°C) specify Class 5 seals.
air, nitrogen, hydraulic oil, water-in oil emulsions or water glycol For elevated temperature service above +250°F (+121°C)
fluids. The recommended operating temperature range for specify Class 5 seals. Class 5 seals can operate up to a
Buna-N seals is -10°F (-23°C) to +165°F (+74°C). maximum of +400°F (+204°C) with reduced service life.

Rod Gland and Rod Seal Kits

Class 1 Polyurethane & Buna-N Class 5 Service Fluorocarbon Retainer Bolt
Rod Rod Gland Kits Rod Seal Kits Rod Gland Kits Rod Seal Kits Torque
(Contains: 1 Each (Contains: 1 Each (Contains: 1 Each (Contains: 1 Each (Torque values are for
Dia.
Sym. #40, 41, 43, 45 Sym. #40, 41, 43, Sym. #40, 41, 43, 45 Sym. #40, 41, 43, bolts installed with
& 117) & 45) & 117) & 45) lubrication.)
4 1/2 PH45RH005 PH45SH005 VH45RH005 VH45SH005 100 - 105 lb-ft
5 PH50RH005 PH50SH005 VH50RH005 VH50SH005 185 - 194 lb-ft
5 1/2 PH55RH005 PH55SH005 VH55RH005 VH55SH005 185 - 194 lb-ft
7 PH70RH005 PH70SH005 VH70RH005 VH70SH005 100 - 105 lb-ft
8 PH80RH005 PH80SH005 VH80RH005 VH80SH005 330 - 346 lb-ft
9 PH90RH005 PH90SH005 VH90RH005 VH90SH005 330 - 346 lb-ft
10 PH1LRH005 PH1LSH005 VH1LRH005 VH1LSH005 330 - 346 lb-ft

Piston Seal Kits

Class 1 & 2 Buna-N Class 5 Fluorocarbon
Piston Ring Kits Hi-Load Piston Poly Flex Piston Piston Ring Kits Hi-Load Piston
Bore (Contains: Seal Kits Seal Kits (Contains: Seal Kits Tie Rod Nut
4 Each Sym. #48 & 4 Each Sym. #48 &
Size (Contains: 2 Each (Contains: 2 Each (Contains: 2 Each Torque1
2 Each Sym. #47 & 26) Sym. #47 & 121 Sym. #42, 44, & 47) 2 Each Sym. #47) Sym. #47 & 121
1 Each Sym. #119 & 1 Each Sym. #119 &
120) 120)
10 PH00CH100 PH00KH100 UH00MH100 VH00CH100 VH00KH100 700 - 716 lb-ft
12 PH00CH120 PH00KH120 UH00MH120 VH00CH120 VH00KH120 1320 - 1336 lb-ft
14 PH00CH140 PH00KH140 UH00MH140 VH00CH140 VH00KH140 1000 - 1016 lb-ft
16 - 20 Consult Factory 2900 - 3000 lb-ft
1
When assembling the cylinder, be sure to torque the tie rods evenly.

Atlas Cylinders
73 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Model Numbers Atlas Series H

How to Order Series H Cylinders

View Data Required On All Cylinder Orders
Table of
Contents
When ordering Series H cylinders, be sure to specify each of the following requirements:
(NOTE: – Duplicate cylinders can be ordered by giving the SERIAL NUMBER from the original cylinder. Factory records
supply a quick, positive identification.)
1. Series Designation (“H”) 8. Ports
Atlas recommends SAE straight thread ports for leak-
2. Bore
proof connections on Series “H” hydraulic cylinders.
3. Style Option (X for double rod or Y for duplex
9. Seals
designs, blank otherwise)
Nitrile piston seals, the Atlas “Tri-Lip” Enhanced
4. Mounting Style Polyurethane rod seal, Buna-N static seals and
Specify your choice of mounting as shown and a wiper seal are all standard, for use with mineral
dimensioned in this catalog. oil based hydraulic fluids. Fluorocarbon, EPR,
Nitroxile and other compounds can be specified,
5. Piston Rod Diameter
subject to application temperature range and fluid
Call out rod diameter. Standard (smallest) rod
used. Cast iron piston rings or low friction PTFE
diameter will be furnished if not specified, unless
piston seals can be specified in the special options
stroke length makes the application questionable.
section.
6. Piston Rod End Style
10. Stroke
Call out the rod end style or specify dimensions if
Specify length required.
non-standard. Rod end style 1 will be furnished if
not specified. 11. Special Options
Specify. Consult factory for questions.
7. Cushions
Specify cushions if required and at which end, using
the codes provided. If double rod end with only one
end cushioned, be sure to clearly indicate which end.

Sample Model Code

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
SPECIAL
H 032 PB2 0137 1 BE S PH 24.00 OPTIONS

Series Specify

Bore Size Stroke

Rod Rod
Style Option Diameter End Seals
Mounting Cushions Ports

NOTE: On double rod end cylinders, repeat rod size and specify rod end threads for each side.
For duplex cylinders, the entire model code for each cylinder should be included and indicated as "back to back" or "rod to rod."
If replacing existing cylinder or ordering parts, include the serial number.

Style 4 Rod End

A style 4 rod end indicates a special rod end configuration. All multiple diameters, etc. It is good design practice to have this
special rod ends must be described by at least all three: KK; machining done on a diameter at least 0.065 inches smaller
A; or W/WF specified with the rod fully retracted. A sketch or than the piston rod diameter. This allows the piston rod to have
drawing should be submitted for rod ends requiring special a chamfer preventing rod seal damage during assembly or
machining such as snap ring grooves, keyways, tapers, maintenance.

Service Policy Certified Dimensions

When cylinders are returned to the factory for repairs, it is Atlas Cylinders guarantees that all cylinders ordered from this
standard policy for Atlas Cylinders to make such part replace­­ catalog will be built to dimensions shown. All dimensions are
ments as will put the cylinder in as good as new condition. certified to be correct, and thus it is not necessary to request
Should the condition of the returned cylinder be such that certified drawings.
expenses for repair exceed the cost of a new one, you will
be notified.

Atlas Cylinders
74 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
How to Order Atlas Series H

Series H Ordering Guide

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
View
Table of SERIES BORE STYLE MOUNT ROD ROD END CUSHIONS PORTS SEALS STROKE OPTIONS
Contents H 015 (1.50") (Leave BEF1 See “Piston Rod 1 (KK Male) NC (None) S (SAE) See “Operating XXX.XX S*
*HA 020 (2.00") Blank BEF2 Selection Chart” 2 (CC Male) HE (Head End) N (NPTF) Fluids” on (Specify (See
*HL 025 (2.50") if FS on page 64. 3 (KK Female) CE (Cap End) I (ISO 6149) page 57. Gross Stroke Below)
HW 032 (3.25") Standard) IH3 0062 (.63") 4 (Special†) BE (Both Ends) F (Flange) PH Standard Tri- if Stop Tube
040 (4.00") IH4 0100 (1.00") 5 (Split Coupler) B BSPT Lip Rod Seal, is
050 (5.00") X ME5 0137 (1.38") 6 (Stub End) R BSPP Nitrile Piston Required)
060 (6.00") (Double ME6 G Metric Lipseals
0175 (1.75")
(Class 1 Seals)
070 (7.00") Rod End) NM1 0200 (2.00") X (Other)
080 (8.00") NM2 0250 (2.50") † Must Specify: (Specify) VH Fluorocarbon
100 (10.0") Y NM3 WF (Rod Extension) Seals
0300 (3.00")
(Class 5 Seals)
120 (12.0") (Duplex) PB2 0350 (3.50") A (Thread Length)
140 (14.0") REF1 0400 (4.00") KK (Thread Size and Pitch) EH EPR Seals
160 (16.0") REF2 (Class 3 Seals)
0450 (4.50")
180 (18.0") SA 0500 (5.00") BH H.W.C.F.
200 (20.0") SL 0550 (5.50") (Class 6 Seals)
TM1 0700 (7.00") MH Class 1 Seals
TM2 0800 (8.00") with Brass
TM3 1000 (10.0") Scraper
(specify HH Spring Loaded
dimension XI) PTFE Seals
(Class 8 Seals)
UH Standard Tri-
Lip Rod Seal,
Polyurethane
Poly Flex
* HA is the same cylinder supplied for pneumatic service with a chrome plated barrel I.D. Piston Seals2
HL is also for pneumatic service with chromed barrel, but prelubricated. XH Special -
HW – Wood Products H Cylinder (available 11/2" - 8" bores) – see below Specify
2
Contact Factory for 16"-20" Bores

S* The letter S refers to special options or modifications that • Gland Wear Ring
deviate from the standard product offering. Non-standard • Hi-Load Piston (11/2"-6" Bores)
modifications and options not identified in the cylinder model • Polymyte Rod Wiperseal
number should be added in the notes when placing an order.
Note: The standard #1 port location is at the top of the
Modifications which can be placed under the designator cylinder, and the standard cushion adjustment screw is
“S” are as follows: in position #2 when facing the rod end of the cylinder. If
• End-of-Stroke Switches multiple ports are required, the last character of the part
– EPS-5, EPS-6, EPS-7, CLS-1, CLS-4 Styles number should be “S”, indicating modified and the desired
(See bulletin AC0840-B11) port location specified in the notes.
– MagnaSwitch

Cylinders for Wood Products Applications

Atlas Cylinders has built a solid reputation in the Wood  ‘Solid’ cap end cushion
Products Industry where demanding applications Cushion machined directly in the cap for improved
require a cylinder that is up to the task. That is why resistance to pressure spikes. High flow ball check valves
we offer an option that makes Atlas Cylinders the for quick out-of-cushion performance.
most dependable and long lasting actuator for Timber  Poly Flex Piston Seals
Industry service. Durable polyurethane material with o-ring energizer for
 Set screw piston to piston rod long life and positive sealing.
Two axial screws in the piston-to-rod joint prevent the
To order your Atlas cylinder with the Wood Products
assembly from unthreading.
options (available 11/2"- 8" bores) specify ‘HW’ Series
 Polyurethane rod wiperseal and ‘UH’ in the seal field of the model code. See the
Durable rod wiperseal cleans any oil adhering to the rod example below.
on the extend stroke and wipes the rod on the return
stroke.
HW 032 PB2 0137 1 BE S UH 10.000
Series Bore Mount Rod Rod End Cushions Ports Seals Stroke

Atlas Cylinders
75 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Cylinder Safety Guide Atlas Series H

Safety Guide for Selecting and Using Hydraulic, Pneumatic Cylinders and Their Accessories
View WARNING: FAILURE OF THE CYLINDER, ITS PARTS, ITS MOUNTING, ITS CONNECTIONS TO OTHER OBJECTS,
Table of OR ITS CONTROLS CAN RESULT IN:
Contents • Unanticipated or uncontrolled movement of the cylinder or objects connected to it.
• Falling of the cylinder or objects held up by it.
• Fluid escaping from the cylinder, potentially at high velocity.
THESE EVENTS COULD CAUSE DEATH OR PERSONAL INJURY BY, FOR EXAMPLE, PERSONS FALLING FROM
HIGH LOCATIONS, BEING CRUSHED OR STRUCK BY HEAVY OR FAST MOVING OBJECTS, BEING PUSHED INTO
DANGEROUS EQUIPMENT OR SITUATIONS, OR SLIPPING ON ESCAPED FLUID.
Before selecting or using Parker Hannifin Corporation (the Company) cylinders • Failure of the pressurized fluid delivery system (hoses, fittings, valves,
or related accessories, it is important that you read, understand and follow the pumps, compressors) which maintain cylinder position.
following safety information. Training is advised before selecting and using the • Catastrophic cylinder seal failure leading to sudden loss of pressurized
Company’s products. fluid.
1.0 General Instructions • Failure of the machine control system.
1.1 Scope – This safety guide provides instructions for selecting and using Follow the recommendations of the “Piston Rod Selection Chart and Data”
(including assembling, installing, and maintaining) cylinder products. This in the publication for the series of cylinders of interest. The suggested piston
safety guide is a supplement to and is to be used with the specific Company rod diameter in these charts must be followed in order to avoid piston rod
publications for the specific cylinder products that are being considered for buckling.
use.
Piston rods are not normally designed to absorb bending moments or loads
1.2 Fail Safe – Cylinder products can and do fail without warning for many which are perpendicular to the axis of piston rod motion. These additional
reasons. All systems and equipment should be designed in a fail-safe mode loads can cause the piston rod to fail. If these types of additional loads are
so that if the failure of a cylinder product occurs people and property won’t be expected to be imposed on the piston rod, their magnitude should be made
endangered. known to our engineering department.
1.3 Distribution – Provide a free copy of this safety guide to each person The cylinder user should always make sure that the piston rod is securely
responsible for selecting or using cylinder products. Do not select or use attached to the machine member.
the Company’s cylinders without thoroughly reading and understanding this On occasion cylinders are ordered with double rods (a piston rod extended
safety guide as well as the specific Company publications for the products from both ends of the cylinder). In some cases a stop is threaded on to one
considered or selected. of the piston rods and used as an external stroke adjuster. On occasions
1.4 User Responsibility – Due to very wide variety of cylinder applications spacers are attached to the machine member connected to the piston rod
and cylinder operating conditions, the Company does not warrant that any and also used as a stroke adjuster. In both cases the stops will create a pinch
particular cylinder is suitable for any specific application. This safety guide point and the user should consider appropriate use of guards. If these
does not analyze all technical parameters that must be considered in select- external stops are not perpendicular to the mating contact surface, or if debris
ing a product. The hydraulic and pneumatic cylinders outlined in this catalog is trapped between the contact surfaces, a bending moment will be placed
are designed to the Company’s design guidelines and do not necessarily on the piston rod, which can lead to piston rod failure. An external stop will
meet the design guideline of other agencies such as American Bureau of also negate the effect of cushioning and will subject the piston rod to impact
Shipping, ASME Pressure Vessel Code etc. The user, through its own loading. Those two (2) conditions can cause piston rod failure. Internal stroke
analysis and testing, is solely responsible for: adjusters are available with and without cushions. The use of external stroke
adjusters should be reviewed with our engineering department.
• Making the final selection of the cylinders and related accessories.
The piston rod to piston and the stud to piston rod threaded connections are
• Determining if the cylinders are required to meet specific design require- secured with an anaerobic adhesive. The strength of the adhesive decreases
ments as required by the Agency(s) or industry standards covering the with increasing temperature. Cylinders which can be exposed to tempera-
design of the user’s equipment. tures above +250°F (+121°C) are to be ordered with a non studded piston
• Assuring that the user’s requirements are met, OSHA requirements are rod and a pinned piston to rod joint.
met, and safety guidelines from the applicable agencies such as but not
limited to ANSI are followed and that the use presents no health or safety 2.3 Cushions – Cushions should be considered for cylinder applications
hazards. when the piston velocity is expected to be over 4 inches/second.
• Providing all appropriate health and safety warnings on the equipment on Cylinder cushions are normally designed to absorb the energy of a linear
which the cylinders are used. applied load. A rotating mass has considerably more energy than the same
mass moving in a linear mode. Cushioning for a rotating mass application
1.5 Additional Questions – Call the appropriate Company technical service should be reviewed by our engineering department.
department if you have any questions or require any additional information.
See the Company publication for the product being considered or used, or 2.4 Cylinder Mountings – Some cylinder mounting configurations may have
call 1-847-298-2400, or go to www.parker.com, for telephone numbers of the certain limitations such as but not limited to minimum stroke for side or foot
appropriate technical service department. mounting cylinders or pressure de-ratings for certain mounts. Carefully review
the catalog for these types of restrictions.
2.0 Cylinder and Accessories Selection Always mount cylinders using the largest possible high tensile alloy steel
2.1 Seals – Part of the process of selecting a cylinder is the selection of socket head cap screws that can fit in the cylinder mounting holes and torque
seal compounds. Before making this selection, consult the “seal information them to the manufacturer’s recommendations for their size.
page(s)” of the publication for the series of cylinders of interest.
2.5 Port Fittings – Hydraulic cylinders applied with meter out or decelera-
The application of cylinders may allow fluids such as cutting fluids, wash tion circuits are subject to intensified pressure at piston rod end.
down fluids etc. to come in contact with the external area of the cylinder.
These fluids may attack the piston rod wiper and or the primary seal and The rod end pressure is approximately equal to:
must be taken into account when selecting and specifying seal compounds. operating pressure x effective cap end area
Dynamic seals will wear. The rate of wear will depend on many operating effective rod end piston area
factors. Wear can be rapid if a cylinder is mis-aligned or if the cylinder has
been improperly serviced. The user must take seal wear into consideration in Contact your connector supplier for the pressure rating of individual
the application of cylinders. connectors.

2.2 Piston Rods – Possible consequences of piston rod failure or 3.0 Cylinder and Accessories Installation and Mounting
separation of the piston rod from the piston include, but are not limited to are: 3.1 Installation
• Piston rod and or attached load thrown off at high speed. 3.1.1 – Cleanliness is an important consideration, and cylinders are
• High velocity fluid discharge. shipped with the ports plugged to protect them from contaminants enter-
ing the ports. These plugs should not be removed until the piping is to
• Piston rod extending when pressure is applied in the piston
be installed. Before making the connection to the cylinder ports, piping
retract mode.
should be thoroughly cleaned to remove all chips or burrs which might
Piston rods or machine members attached to the piston rod may move have resulted from threading or flaring operations.
suddenly and without warning as a consequence of other conditions
occurring to the machine such as, but not limited to:
• Unexpected detachment of the machine member from the piston rod.

Atlas Cylinders
76 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Cylinder Safety Guide Atlas Series H

3.1.2 – Cylinders operating in an environment where air drying materials Rod seal leakage could also be traced to bearing wear. If clear-
are present such as fast-drying chemicals, paint, or weld splatter, or ance is excessive, replace rod bearing and seal. Rod seal leakage
other hazardous conditions such as excessive heat, should have shields can also be traced to seal deterioration. If seals are soft or gummy
View installed to prevent damage to the piston rod and piston rod seals. or brittle, check compatibility of seal material with lubricant used
if air cylinder, or operating fluid if hydraulic cylinder. Replace with
Table of 3.1.3 – Proper alignment of the cylinder piston rod and its mating seal material, which is compatible with these fluids. If the seals are
Contents component on the machine should be checked in both the extended and hard or have lost elasticity, it is usually due to exposure to tem-
retracted positions. Improper alignment will result in excessive rod gland peratures in excess of 165°F. (+74°C). Shield the cylinder from the
and/or cylinder bore wear. On fixed mounting cylinders attaching the pis- heat source to limit temperature to 350°F. (+177°C.) and replace
ton rod while the rod is retracted will help in achieving proper alignment. with fluorocarbon seals.
3.1.4 – Sometimes it may be necessary to rotate the piston rod in order 4.2.1.2 – Cylinder body seal leak can generally be traced to a
to thread the piston rod into the machine member. This operation must loose head. Torque the head to manufacturer’s recommendation
always be done with zero pressure being applied to either side of the for that bore size.
piston. Failure to follow this procedure may result in loosening the piston
to rod-threaded connection. In some rare cases the turning of the piston Excessive pressure can also result in cylinder body seal leak.
rod may rotate a threaded head and loosen it from the cylinder body. Determine maximum pressure to rated limits. Replace seals and
Confirm that this condition is not occurring. If it does, re-tighten the head retorque head as in paragraph above. Excessive pressure can also
firmly against the cylinder body. result in cylinder body seal leak. Determine if the pressure rating of
the cylinder has been exceeded. If so, bring the operating pressure
For double rod cylinders it is also important that when attaching or down to the rating of the cylinder and have the head replaced.
detaching the piston rod from the machine member that the torque be
applied to the piston rod end of the cylinder that is directly attaching to Pinched or extruded cylinder body seal will also result in a leak.
the machine member with the opposite end unrestrained. If the design Replace cylinder body seal and retorque as in paragraph above.
of the machine is such that only the rod end of the cylinder opposite to Cylinder body seal leakage due to loss of radial squeeze which
where the rod attaches to the machine member can be rotated, consult shows up in the form of flat spots or due to wear on the O.D. or I.D.
the factory for further instructions. – Either of these are symptoms of normal wear due to high cycle
3.2 Mounting Recommendations rate or length of service. Replace seals as per paragraph above.
3.2.1 – Always mount cylinders using the largest possible high tensile 4.2.2 – Internal Leakage
alloy steel socket head screws that can fit in the cylinder mounting holes 4.2.2.1 – Piston seal leak (by-pass) 1 to 3 cubic inches per minute
and torque them to the manufacturer’s recommendations for their size. leakage is considered normal for piston ring construction. Virtually
3.2.2 – Side-Mounted Cylinders – In addition to the mounting bolts, no static leak with lipseal type seals on piston should be expected.
cylinders of this type should be equipped with thrust keys or dowel pins Piston seal wear is a usual cause of piston seal leakage. Replace
located so as to resist the major load. seals as required.
3.2.3 – Tie Rod Mounting – Cylinders with tie rod mountings are recom- 4.2.2.2 – With lipseal type piston seals excessive back pressure
mended for applications where mounting space is limited. Nuts used for due to over-adjustment of speed control valves could be a direct
this mounting style should be torqued to the same value as the tie rods cause of rapid seal wear. Contamination in a hydraulic system
for that bore size. can result in a scored cylinder bore, resulting in rapid seal wear. In
either case, replace piston seals as required.
3.2.4 – Flange Mount Cylinders – The controlled diameter of the rod
gland extension on head end flange mount cylinders can be used 4.2.2.3 – What appears to be piston seal leak, evidenced by the
as a pilot to locate the cylinders in relation to the machine. After align- fact that the cylinder drifts, is not always traceable to the piston. To
ment has been obtained, the flanges may be drilled for pins or dowels to make sure, it is suggested that one side of the cylinder piston be
prevent shifting. pressurized and the fluid line at the opposite port be disconnected.
Observe leakage. If none is evident, seek the cause of cylinder drift
3.2.5 – Trunnion Mountings – Cylinders require lubricated bearing blocks in other component parts in the circuit.
with minimum bearing clearances. Bearing blocks should be carefully
aligned and rigidly mounted so the trunnions will not be subjected to 4.2.3 – Cylinder Fails to Move the Load
bending moments. The rod end should also be pivoted with the pivot pin 4.2.3.1 – Pneumatic or hydraulic pressure is too low. Check the
in line and parallel to axis of the trunnion pins. pressure at the cylinder to make sure it is to circuit requirements.
3.2.6 – Clevis Mountings – Cylinders should be pivoted at both ends 4.2.3.2 – Piston Seal Leak – Operate the valve to cycle the cylinder
with centerline of pins parallel to each other. After cylinder is mounted, and observe fluid flow at valve exhaust ports at end of cylinder
be sure to check to assure that the cylinder is free to swing through its stroke. Replace piston seals if flow is excessive.
working arc without interference from other machine parts.
4.2.3.3 – Cylinder is undersized for the load – Replace cylinder with
4.0 Cylinder and Accessories Maintenance, Troubleshooting one of a larger bore size.
and Replacement
4.3 Erratic or Chatter Operation
4.1 Storage – At times cylinders are delivered before a customer is ready to
install them and must be stored for a period of time. When storage is required 4.3.1 – Excessive friction at rod bearing or piston bearing due to load
the following procedures are recommended. misalignment – Correct cylinder-to-load alignment.
4.1.1 – Store the cylinders in an indoor area which has a dry, clean and 4.3.2 – Cylinder sized too close to load requirements – Reduce load or
noncorrosive atmosphere. Take care to protect the cylinder from both install larger cylinder.
internal corrosion and external damage. 4.3.3 – Erratic operation could be traced to the difference between static
4.1.2 – Whenever possible cylinders should be stored in a vertical posi- and kinetic friction. Install speed control valves to provide a back pres-
tion (piston rod up). This will minimize corrosion due to possible conden- sure to control the stroke.
sation which could occur inside the cylinder. This will also minimize seal
4.4 Cylinder Modifications, Repairs, or Failed Component – Cylinders
damage.
as shipped from the factory are not to be disassembled and or modified.
4.1.3 – Port protector plugs should be left in the cylinder until the time of If cylinders require modifications, these modifications must be done at
installation. company locations or by the Company’s certified facilities. The Industrial
4.1.4 – If a cylinder is stored full of hydraulic fluid, expansion of the fluid Cylinder Division Engineering Department must be notified in the event of
due to temperature changes must be considered. Installing a check a mechanical fracture or permanent deformation of any cylinder component
valve with free flow out of the cylinder is one method. (excluding seals). This includes a broken piston rod, head, mounting
accessory or any other cylinder component. The notification should include
4.1.5 – When cylinders are mounted on equipment that is stored outside all operation and application details. This information will be used to provide
for extended periods, exposed unpainted surfaces, e.g. piston rod, must an engineered repair that will prevent recurrence of the failure.
be coated with a rust-inhibiting compound to prevent corrosion. It is allowed to disassemble cylinders for the purpose of replacing seals or
seal assemblies. However, this work must be done by strictly following all the
4.2 Cylinder Trouble Shooting instructions provided with the seal kits.
4.2.1 – External Leakage
4.2.1.1 – Rod seal leakage can generally be traced to worn or
damaged seals. Examine the piston rod for dents, gouges or score
marks, and replace piston rod if surface is rough.

Atlas Cylinders
77 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Notes Atlas Series H

NOTES
View
Table of
Contents

Atlas Cylinders
78 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Notes Atlas Series H

NOTES
View
Table of
Contents

Atlas Cylinders
79 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Notes Atlas Series H

NOTES
View
Table of
Contents

Atlas Cylinders
80 Des Plaines, IL USA
 Catalog HY04-AC1140-5/US Heavy-Duty Hydraulic Cylinders
Offer of Sale Atlas Series H

Offer of Sale
View The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors (“Seller”)
Table of are hereby offered for sale at prices to be established by Seller. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and
Contents Conditions. Buyer’s order for any item described in its document, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer. All goods, services
or work described will be referred to as “Products”.
1. Terms and Conditions. Seller’s willingness to offer Products, or accept an order infringement or any other claim, brought by or incurred by Buyer, Buyer’s employees,
for Products, to or from Buyer is subject to these Terms and Conditions or any newer or any other person, arising out of: (a) improper selection, improper application or other
version of the terms and conditions found on-line at www.parker.com/saleterms/. Seller misuse of Products purchased by Buyer from Seller; (b) any act or omission, negligent
objects to any contrary or additional terms or conditions of Buyer’s order or any other or otherwise, of Buyer; (c) Seller’s use of patterns, plans, drawings, or specifications
document issued by Buyer. furnished by Buyer to manufacture Product; or (d) Buyer’s failure to comply with these
2. Price Adjustments; Payments. Prices stated on Seller’s quote or other documen- terms and conditions. Seller shall not indemnify Buyer under any circumstance except
tation offered by Seller are valid for 30 days, and do not include any sales, use, or other as otherwise provided.
taxes unless specifically stated. Unless otherwise specified by Seller, all prices are 12. Cancellations and Changes. Orders shall not be subject to cancellation or
F.C.A. Seller’s facility (INCOTERMS 2010). Payment is subject to credit approval and change by Buyer for any reason, except with Seller’s written consent and upon terms
is due 30 days from the date of invoice or such other term as required by Seller’s Credit that will indemnify, defend and hold Seller harmless against all direct, incidental and
Department, after which Buyer shall pay interest on any unpaid invoices at the rate of consequential loss or damage. Seller may change product features, specifications,
1.5% per month or the maximum allowable rate under applicable law. designs and availability with notice to Buyer.
3. Delivery Dates; Title and Risk; Shipment. All delivery dates are approximate and 13. Limitation on Assignment. Buyer may not assign its rights or obligations under
Seller shall not be responsible for any damages resulting from any delay. Regardless this agreement without the prior written consent of Seller.
of the manner of shipment, title to any products and risk of loss or damage shall pass 14. Force Majeure. Seller does not assume the risk and shall not be liable for delay
to Buyer upon placement of the products with the shipment carrier at Seller’s facility. or failure to perform any of Seller’s obligations by reason of circumstances beyond the
Unless otherwise stated, Seller may exercise its judgment in choosing the carrier and reasonable control of Seller (hereinafter “Events of Force Majeure”). Events of Force
means of delivery. No deferment of shipment at Buyers’ request beyond the respec- Majeure shall include without limitation: accidents, strikes or labor disputes, acts of
tive dates indicated will be made except on terms that will indemnify, defend and hold any government or government agency, acts of nature, delays or failures in delivery
Seller harmless against all loss and additional expense. Buyer shall be responsible for from carriers or suppliers, shortages of materials, or any other cause beyond Seller’s
any additional shipping charges incurred by Seller due to Buyer’s acts or omissions. reasonable control.
4. Warranty. Seller warrants that the Products sold hereunder shall be free from 15. Waiver and Severability. Failure to enforce any provision of this agreement will
defects in material or workmanship for a period of eighteen months from the date of not waive that provision nor will any such failure prejudice Seller’s right to enforce that
delivery to Buyer. The prices charged for Seller’s products are based upon the exclu- provision in the future. Invalidation of any provision of this agreement by legislation or
sive limited warranty stated above, and upon the following disclaimer: DISCLAIMER other rule of law shall not invalidate any other provision herein. The remaining provi-
OF WARRANTY: THIS WARRANTY COMPRISES THE SOLE AND ENTIRE sions of this agreement will remain in full force and effect.
WARRANTY PERTAINING TO PRODUCTS PROVIDED HEREUNDER. SELLER
DISCLAIMS ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING 16. Termination. Seller may terminate this agreement for any reason and at any time
DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. by giving Buyer thirty (30) days written notice of termination. Seller may immediately
terminate this agreement, in writing, if Buyer: (a) commits a breach of any provision of
5. Claims; Commencement of Actions. Buyer shall promptly inspect all Products this agreement (b) appointments a trustee, receiver or custodian for all or any part of
upon delivery. No claims for shortages will be allowed unless reported to the Seller Buyer’s property (c) files a petition for relief in bankruptcy on its own behalf, or by a third
within 10 days of delivery. No other claims against Seller will be allowed unless party (d) makes an assignment for the benefit of creditors, or (e) dissolves or liquidates
asserted in writing within 30 days after delivery. Buyer shall notify Seller of any alleged all or a majority of its assets.
breach of warranty within 30 days after the date the defect is or should have been
discovered by Buyer. Any action based upon breach of this agreement or upon any 17. Governing Law. This agreement and the sale and delivery of all Products here-
other claim arising out of this sale (other than an action by Seller for an amount due on under shall be deemed to have taken place in and shall be governed and construed
any invoice) must be commenced within 12 months from the date of the breach without in accordance with the laws of the State of Ohio, as applicable to contracts executed
regard to the date breach is discovered. and wholly performed therein and without regard to conflicts of laws principles. Buyer
irrevocably agrees and consents to the exclusive jurisdiction and venue of the courts
6. LIMITATION OF LIABILITY. UPON NOTIFICATION, SELLER WILL, AT ITS of Cuyahoga County, Ohio with respect to any dispute, controversy or claim arising out
OPTION, REPAIR OR REPLACE A DEFECTIVE PRODUCT, OR REFUND THE of or relating to this agreement.
PURCHASE PRICE. IN NO EVENT SHALL SELLER BE LIABLE TO BUYER FOR
ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES 18. Indemnity for Infringement of Intellectual Property Rights. Seller shall have
ARISING OUT OF, OR AS THE RESULT OF, THE SALE, DELIVERY, NON- no liability for infringement of any patents, trademarks, copyrights, trade dress, trade
DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS OR ANY secrets or similar rights except as provided in this Section. Seller will defend and
PART THEREOF, OR FOR ANY CHARGES OR EXPENSES OF ANY NATURE indemnify Buyer against allegations of infringement of U.S. patents, U.S. trademarks,
INCURRED WITHOUT SELLER’S WRITTEN CONSENT, EVEN IF SELLER copyrights, trade dress and trade secrets (“Intellectual Property Rights”). Seller will
HAS BEEN NEGLIGENT, WHETHER IN CONTRACT, TORT OR OTHER LEGAL defend at its expense and will pay the cost of any settlement or damages awarded in
THEORY. IN NO EVENT SHALL SELLER’S LIABILITY UNDER ANY CLAIM MADE an action brought against Buyer based on an allegation that a Product sold pursuant to
BY BUYER EXCEED THE PURCHASE PRICE OF THE PRODUCTS. this Agreement infringes the Intellectual Property Rights of a third party. Seller’s obliga-
tion to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten
7. User Responsibility. The user, through its own analysis and testing, is solely (10) days after Buyer becomes aware of such allegations of infringement, and Seller
responsible for making the final selection of the system and Product and assuring that having sole control over the defense of any allegations or actions including all negotia-
all performance, endurance, maintenance, safety and warning requirements of the tions for settlement or compromise. If a Product is subject to a claim that it infringes the
application are met. The user must analyze all aspects of the application and follow Intellectual Property Rights of a third party, Seller may, at its sole expense and option,
applicable industry standards and Product information. If Seller provides Product or procure for Buyer the right to continue using the Product, replace or modify the Product
system options, the user is responsible for determining that such data and specifica- so as to make it noninfringing, or offer to accept return of the Product and return the
tions are suitable and sufficient for all applications and reasonably foreseeable uses purchase price less a reasonable allowance for depreciation. Notwithstanding the fore-
of the Products or systems. going, Seller shall have no liability for claims of infringement based on information
8. Loss to Buyer’s Property. Any designs, tools, patterns, materials, drawings, confi- provided by Buyer, or directed to Products delivered hereunder for which the designs
dential information or equipment furnished by Buyer or any other items which become are specified in whole or part by Buyer, or infringements resulting from the modification,
Buyer’s property, will be considered obsolete and may be destroyed by Seller after two combination or use in a system of any Product sold hereunder. The foregoing provi-
consecutive years have elapsed without Buyer ordering the items manufactured using sions of this Section shall constitute Seller’s sole and exclusive liability and Buyer’s
such property. Seller shall not be responsible for any loss or damage to such property sole and exclusive remedy for infringement of Intellectual Property Rights.
while it is in Seller’s possession or control. 19. Entire Agreement. This agreement contains the entire agreement between the
9. Special Tooling. A tooling charge may be imposed for any special tooling, includ- Buyer and Seller and constitutes the final, complete and exclusive expression of the
ing without limitation, dies, fixtures, molds and patterns, acquired to manufacture terms of sale. All prior or contemporaneous written or oral agreements or negotiations
Products. Such special tooling shall be and remain Seller’s property notwithstanding with respect to the subject matter are herein merged.
payment of any charges by Buyer. In no event will Buyer acquire any interest in appa- 20. Compliance with Law, U. K. Bribery Act and U.S. Foreign Corrupt Practices
ratus belonging to Seller which is utilized in the manufacture of the Products, even if Act. Buyer agrees to comply with all applicable laws and regulations, including both
such apparatus has been specially converted or adapted for such manufacture and those of the United Kingdom and the United States of America, and of the country or
notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller shall have countries of the Territory in which Buyer may operate, including without limitation the
the right to alter, discard or otherwise dispose of any special tooling or other property U. K. Bribery Act, the U.S. Foreign Corrupt Practices Act (“FCPA”) and the U.S. Anti-
in its sole discretion at any time. Kickback Act (the “Anti-Kickback Act”), and agrees to indemnify and hold harmless
10. Buyer’s Obligation; Rights of Seller. To secure payment of all sums due or oth- Seller from the consequences of any violation of such provisions by Buyer, its employ-
erwise, Seller shall retain a security interest in the goods delivered and this agreement ees or agents. Buyer acknowledges that they are familiar with the provisions of the
shall be deemed a Security Agreement under the Uniform Commercial Code. Buyer U. K. Bribery Act, the FCPA and the Anti-Kickback Act, and certifies that Buyer will
authorizes Seller as its attorney to execute and file on Buyer’s behalf all documents adhere to the requirements thereof. In particular, Buyer represents and agrees that
Seller deems necessary to perfect its security interest. Buyer shall not make any payment or give anything of value, directly or indirectly to
11. Improper use and Indemnity. Buyer shall indemnify, defend, and hold Seller any governmental official, any foreign political party or official thereof, any candidate
harmless from any claim, liability, damages, lawsuits, and costs (including attorney for foreign political office, or any commercial entity or person, for the purpose of influ-
fees), whether for personal injury, property damage, patent, trademark or copyright encing such person to purchase products or otherwise benefit the business of Seller.

Atlas Cylinders
Des Plaines, IL USA
 View
Table of
Contents

500 S. Wolf Rd.

Des Plaines, IL 60016 USA
Tel.: (847) 298-2400
Fax.: (800) 892-1008
www.AtlasCylinders.com • [email protected]