Scribd
Upload
137 views2 pages

JSS I Basic Tech

The document contains a list of 40 multiple choice questions testing knowledge of basic technology topics like building structures, tools, and safety. It covers definitions of buildings, technical drawing instruments, and materials used for construction. It also includes a short theory section asking to define buildings, compare types of sketches, and identify tool types.

Uploaded by

Triplejayart
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
137 views2 pages

JSS I Basic Tech

The document contains a list of 40 multiple choice questions testing knowledge of basic technology topics like building structures, tools, and safety. It covers definitions of buildings, technical drawing instruments, and materials used for construction. It also includes a short theory section asking to define buildings, compare types of sketches, and identify tool types.

Uploaded by

Triplejayart
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

JSS 1 Basic Tech

OBJECTIVE
1. _______ is any types of structure that has a roof and walls (a) Bus (b) Building (c) Lorry (d) Car
2. _________ is the type of house built completely on one level (e.g. ground) (a) Semi-detached
(b) Bungallow (c) Hut (d) High – rise
3. __________ is used as the binding agent in concrete, block moulding and plastering (a)
Cement (b) Ceramic (c) Petal (d) Sand
4. __________ is used as the drawing horizontal lines and supporting set squares (a) Drawing
board (b) Tee Square (c) Protractor (d) French curve
5. The instrument used for drawing irregular curve is called (a) divider (b) Curve (c) Scale Rule (d)
French Compass
6. We have 30o – 60 o set square and _________ (a) 45o set square (b) 15o set square
(c) 50o set square (d) 100o set square
7. The protractor is used to measure angle between O and _______ (a) 32o (b) 180o (c) 90o (d)
30o
8. French curves are used to draw ____ curved lines (a) Regular (b) Straight (c) Irregular (d)
Italian.
9. ____________ is used to transfer measurement from one past of the drawing to another
(a)Steel rule (b) Compass (c) Protractor (d) Divider
10. Scale rule is used for _______. (a) measuring angles (b) measuring dimension of object (c)
drawing lines (d) setting paper
11. ___________ contains name, school, class and date (a) Title block (b) Title book (c) Box name
(d) Box school
12. The following are products of technology found in schools except (a) Bulldozer (b) Bench vice
(c) Computer (d) Calculator
13. Mixture of sand, cement, gravel with water is called (a) Concrete (b) Alloy (c) Gum (d)
Ceramics
14. This is used for beautification of houses (a) Curtain (b) Calendar (c) Ceramics (d) Wall Clock
15. __________ can be defined as a room or building in which things are made repaired
and maintained (a) workshop (b) sitting room (c) house (d) workshop layout
16. The following are examples of information required in a title block except ______. (a) Scale
(b) Name (c) School (d) Age
17. The following are the operation performed in the workshop except (a) construction (b) repair
(c) maintenance (d) surgery
18. Wood can be classified into ________ and ______ (a) hard and wet wood ( b) soft and wet
(c) Cheap and expensive wood (d) Hard and softwood
19. ______ are called deciduous wood (a) Softwood (b) Wet wood (c) Cheap wood (d) Hard wood
20. Any material used for building is called a _______________. (a) Instruments (b) Construction
Material (c) Contractor Tools (d) Building Material
21. __________ are iron buckets painted red and loaded with sand for putting out small fire
(a) Sand bucket (b) Chemical buckets (c) Alarm bucket (d) Blanket bucket
22. ___________ can be defined as a technical language used for describing things with the aid of
drawing (a) Technical drawing (b) Drawing materials (c) drawing instrument (d) Drawing board
23. ___________ is obtained when two or more different metals are mixed together (a) Alloy (b)
Ferrous (c) Non – Ferrous (d) Rubber
24. _________ is used for determining angle at various degrees. (a) Protracor (b) steel rule
(c) Steel lapel (d) Caliper
25. The means of communicating with the aid of drawing instrument and materials is known as
________. (a) Fine art (b) Technical drawing (c) Visual arts (d) Creative drawing
26. Hacksaw is used to cut _______________ (a) wood (b) Concrete (c) Metal (d) Plastic
27. This is used for planning rough wood (a) Tee Square (b) Rip Saw (c) Force plane (d) Jack plane
28. Who is a Pedestrian? (a) A Driver (b) Cyclist (c) Athlete (d) Somebody walking along the road
or street
29. In order to prevent an accident, a motorist must use the following except (a) driving mirror (b)
Obey speed limit (c) Seat belt (d) Cell phone
30. The table on which wood worker perform their operation is called (a) Construction table (b)
Bench box
(c) workshop table (d) workbench
31. Which of these is not a technological product? (a) Electric blender (b) Grinding stone (c)
Washing machine (d) Phone
32. One of these is safety device for the eye. (a) Boot (b) Goggle (c) Helmet (d) Gloves
33. In a workshop, one of these is a fire protector equipment. (a) Helmet (b) sand bucket (c)
Google (d) Safety boot
34. The art of writing letters and numbers in technical drawing is called _________. (a) Board
practice (b) Lettering (c) Gothic (d) Italics
35. Metal is a good conductor of heat and electricity. (a) No, very false (b) Yes, very true (c) No (d)
Yes, partially true
36. Who invented the electric bulb? (a) Isaac Newton (b) Thomas Jefferson (c) Thomas Edison (d)
Thomas Newton
37. To draw arcs and circles ________ is needed. (a) a pair of dividers (b) protractor (c) scale rule
(d) a pair of compass
38. The instrument for facilitating drawing of shapes and patterns is ________. (a) Template (b)
Stencil (c) French curves (d) protractor
39. The following are technical drawing instruments except _________. (a) French curve (b) Tee
square (c) Set square (d) Try square
40. The following are products of technology found in schools except (a) Calculator (b) Bench vice
(c) Computer (d) Bulldozer

THEORY: Answer any one from this section and the practical

1. Define a building as a structure and list 2 types of building you know (Based on designs).

2. Differentiate between board practice and free hand sketch.

3. Identify the type of tool the following belong to


eg. Divider - Marking tools.
i. Caliper
ii. Hammer
iii Protractor
iv. Punch
v. Sand Paper

4. PRACTICAL : [Sketch a tee- Square and label the parts]

You might also like