ISO 9001 : 2015

W AJUD
ACHIEVE EXCELLENCE

MINING & INDUSTRIAL COMPONENT

PUMP | VALVE | AIR DRYER | TYRE PROTECTION CHAIN

 GLOSSARY DIMENSIONS
b Bore
h Height
w Width
l Length
t Thickness
cs Cone Size
p Parameter
ts Thread Size
ss Spanner Size
ot Outer Thread
it Inner Thread
tl Thread Length
lp Piston Length
ls Stroke Length
bd Beam Distance RATINGS
cr Camber Radius
pd Point Diameter V Voltage
od Outer Diameter A Current
id Inner Diameter kW Power Rated
ct Connecting Thread Hz Frequency range

The information provided in this catalog are prepared

with utmost care through help of our partners. However,
we bear no liability for any error or incomplete informa-
tion. The numbers and descriptions are used for identifi-
cation purpose only.
INTRODUCTION
O
ur Company was established as an exporter in partner with vari-
ous manufacturers across the globe to provide wide range of spare
parts for heavy-duty commercial vehicles at competitive prices
and fastest way accessible, while upholding the high standards and cus-
tomer satisfaction. To achieve this, we developed culture in our work
force right from operators to supervisors to have passion for challeng-
es, continuous improvement, excellence and particularly value people.
Our major products in Mining & Industrial components are Valves,
Pumps, Air dryer and Tyre protection unit. We develop products through
careful consideration of expected product cost, longevity and safety.

O
ur manufacturers are carefully selected through careful consider-
ation, such as manufacturing experience, latest fabrication and de-
sign facility, understanding of quality standards and origin of raw
materials. Currently our manufacturers are from India, China, Turkey and
South Korea and we are working closely to develop products as per region-
al requirements of various organizations as well as for our WAJUD Brand.

O
ur International regional activities expanding exponentially, Today
comprises an exciting array of established offices across the region via
strategic partnerships, investments and solutions. Our focus in the re-
gion is to build meaningful partnerships and provide solutions based on local
needs. We look forward to working with new partners and strengthening our
current regional partnerships. We stand by our products and offer warranties

+10
on all parts. Our brands have always exceeded expectations and satisfied our
customers to the fullest.

Offices

+4 Warehouses

+200 Employees
PRODUCT
GROUP
PUMP & VACCUM, CENTRIFUGAL, WATER PRESSURE, DELIVERY, BLOWERS 8-10
COMPRESSOR

VALVE BUTTERFLY, DIAPHRAGM, CHECK, WEDGE GATE, KNIFE GATE, BALL, AIR RELEASE 11-14

AIR DRYER REFRIGERATED, DESICCANT ADSORPTION, FILTERS, WATER SEPARATORS 15-17

BELT BELT SCRAPPER, BELT SUPPORT, COMPOSITE LINER, TRACKER, SEALING, SAFETY 18-24
CONVEYOR CONTROLS

MINING EQUIPMENT SALE, SPARE PARTS, UNDERCARRIAGE, GET, UNDERGROUND MA- 25-33
MACHINERY & CHINERY PARTS, DRIFTERS
PARTS

TYRE
PROTECTION TYRE PROTECTION CHAINS 34-35
CHAIN
WHY
CHOOSE US

EXPERIENCE
More than 25 Years of
production experience

QUALITY
High quality products with
longer warranty periods

AFTER SALE
Excellent after sale service
with dedicated team always
available to assist

PRICE
Competitive price through
TEAM strictly controlled production
Professional sales team with cost
faster reponse
QUALITY
MANAGEMENT
ISO 9001:2015

Testing
We bring tested quality products to
the road. Every product undergoes
rigorous testing process to prove that
it can perform its functionality under
the toughest terrain of the trucks.
Our testing and inspection process
include Dimensional Analysis, Material
Identification, Hardness, Surface
Thickness, Load, and more.

Inspection
Right before the parts are sent for
packaging our engineers inspect
all our manufactured products to
ensure the quality and other technical
specifications are consistent and
matches our requirement. Which means
you can always rely on high quality,
durability and efficiency.
INDUSTRIAL PUMP
& COMPONENT
www.wajud.com 9

VACCUM PUMP
Our vacuum pumps are equivalent to battioni pagani and will Benefits
perform reliably for many years in corrosive and heavy duty • Long-lasting blades
applications. Pumps are efficiently assembled with high stainless • Quality roller bearings
steel meet your needs for top performance and fast, economical • High wear resistance
installation.

MAX PRESSURE POWER AT MAX

WAJUD NO. l/min RPM (MAX) APPLICATION
(psi) VACUUM kW

VAC-P-001 9,000 1400 36 18 Slurry tankers and gully suckers

VAC-P-002 11,100 1400 36 20 Slurry tankers and gully suckers

VAC-P-003 13,800 1400 36 25 Slurry tankers and gully suckers

Heavy duty slurry tankers and gully

VAC-P-004 14,000 1200 36 36
suckers

Heavy duty slurry tankers and gully

VAC-P-005 16,000 1200 36 42
suckers

Heavy duty slurry tankers and gully

VAC-P-006 18,000 1200 36 48
suckers

HIGH PRESSURE PUMP

Our high pressure pumps are available in various drive end con- Benefits
figurations are equivalent to URACA, it has low energy consump- • Robust pump design
tion due to high mechanical efficiency. • Low energy consumption
• High mechanical efficiency

OPERATING PRESSURE POWER AT MAX

WAJUD NO. l/min APPLICATION
(bar) VACUUM kW

WPR-P-001 530 37 - 430 110 Cleaning and industrial processes

WPR-P-002 2800 8 - 335 110 Cleaning and industrial processes

WPR-P-003 3000 10 - 615 170 Cleaning and industrial processes

WRP-P-004 820 13 - 2080 450 Cleaning and industrial processes

WRP-P-005 625 60 - 4550 1200 Cleaning and industrial processes

WRP-P-006 650 120 - 5040 2000 Cleaning and industrial processes

WRP-P-007 200 20 - 160 30 Cleaning and industrial processes

WRP-P-008 250 12 - 230 55 Cleaning and industrial processes

WRP-P-009 250 162 - 483 135 Cleaning and industrial processes

WRP-P-010 250 216 - 631 180 Cleaning and industrial processes

WRP-P-011 2800 23 - 910 440 Cleaning and industrial processes

10

CENTRIFUGAL PUMP
WAJUD centrifugal pump are an ideal for fire and water trucks. Benefits
They achieve the best possible efficiency through high quality • High quality precision
impeller blades, diffuser and the spiral housing makng makes the • Long life performance
high-pressure pump resistant against contaminated water. • Highest possible efficiency

OPERATING PRESSURE
WAJUD NO. l/min RPM APPLICATION
(bar)

CFG-P-001 6-8 1500 2800 Fire fighting

CFG-P-002 8 - 10 3,000 3000 Fire fighting

CFG-P-003 10 -15 1500 2800 Fire fighting

SLIDING VANE PUMP

Our high-quality sliding vane pump technologies is equivalent to Benefits
Blackmer. In addition, we offer a variety of complete Engineered • Wide range of solutions
Package Solutions that feature fully skidded vane pumps that • Carefully tested and checked
include the baseplate, gearbox, motor and pump. • Quality and efficiency

OPERATING PRESSURE
WAJUD NO. l/min RPM APPLICATION
(bar)

Bulk Plants, Terminals and Truck

SLV-P-001 24.1 110 - 400 350 - 980
Systems for Propane & Ammonia

Bulk Plants, Terminals and Truck

SLV-P-002 24.1 225 - 760 350 - 980
Systems for Propane & Ammonia

Bulk Plants, Terminals and Truck

SLV-P-003 24.1 565 - 1400 350 - 800
Systems for Propane & Ammonia

Bulk Plants, Terminals and Truck

SLV-P-004 36.2 8 - 55 750 - 1150
Systems for CO2

Bulk Plants, Terminals and Truck

SLV-P-005 36.2 20 - 90 750 - 1150
Systems for CO2

Bulk Plants, Terminals and Truck

SLV-P-006 36.2 65 - 275 330 - 640
Systems for CO2

Bulk Plants, Terminals and Truck

SLV-P-007 36.2 75 - 570 330 - 640
Systems for CO2

SLV-P-008 13.8 132 - 2233 68 - 600 All types of liquids

 VALVE
& COMPONENT
12

BUTTERFLY VALVE
Our wafer butterfly valves are designed with a reliable valve seat Benefits
which allows for the flange to be easily connected to the valve. • Easy installation
Meeting ANSI/API, BS, DIN, and JIS requirements. • Cost-effective and easily
maintained
• Easily automated

TYPE SIZE (mm) PRESSURE RATING APPLICATION

Bulk liquid storage, oil & gas, LNG storage & transportation,
steam distribution systems, power generation, geother-
WAFER BUTTERFLY 50 - 1000 Class 150 to Class 900 mal steam, sugar & ethanol, pulp & paper liquor, refining,
chemical processing, water & wastewater, air separation,
cryogenic services

CONCENTRIC BUTTERFLY 50 - 1000 PN6-PN16, 150psi Chemical, Food and Beverage, Pulp and Paper, Waste Water

Bulk liquid storage, oil & gas, LNG storage & transportation,
steam distribution systems, power generation, geother-
FLANGE BUTTERFLY 50 - 1000 Class 150 to Class 900 mal steam, sugar & ethanol, pulp & paper liquor, refining,
chemical processing, water & wastewater, air separation,
cryogenic services

BALL VALVE
Our ball valves can withstand various pressures and corrosion. Benefits
Due to their bubble-tight seal, they are zero-leak, and capable of • Small fluid resistance
controlling high pressures and high fluid volumes. • Easy to operate
• Rust-proof mechanism

TYPE SIZE (mm) PRESSURE RATING APPLICATION

Bulk liquid storage, oil & gas, LNG storage & transportation,
steam distribution systems, power generation, geother-
FLOATING BALL 15- 250 Class 150 to Class 2500 mal steam, sugar & ethanol, pulp & paper liquor, refining,
chemical processing, water & wastewater, air separation,
cryogenic services

Mixing/blending line medias, Flow Diversion, Flow Bypass,

3 WAY BALL 15 - 600 Class 150 to Class 600 Direct flow in/out of storage tanks, Shutoff flow from differ-
ent directions

Oil and Gas Pipeline, Offshore Platforms, Onshore Terminals,

Emergency Shutdown, Suction and Discharge Isolation,
Block and Bypass, Pumping, Compression and Reinjection
FULLY WELDED BALL 50 - 1200 Class 150 to Class 2500
Units, Metering Stations, Pig Traps, Surge-Relief Skids,
Decoking Isolation, Buried Services, Produced Water (Brine)
Services
www.wajud.com 13

GATE VALVE
Threaded operation of the gate makes it suitable for different
Benefits
applications and can work with liquid or gaseous media. Ideal
• Minimal fluid resistance
component for giving flow logic to pipelines, gate valves permit or
• Easy-to-use
stop a medium’s flow to a specific location.
• Easily automated

TYPE SIZE (mm) PRESSURE RATING APPLICATION

Oil and Gas Pipeline, Offshore Platforms, Onshore Terminals,

LNG storage & transportation, steam distribution systems,
WEDGE GATE 15 - 1500 Class 150 to Class 2500 power generation, geothermal steam, sugar & ethanol, pulp
& paper liquor, refining, chemical processing, water & waste-
water, air separation, cryogenic services

Oil and Gas Pipeline, Offshore Platforms, Onshore Terminals,

LNG storage & transportation, steam distribution systems,
SALB GATE 50 - 1500 Class 150 to Class 2500 power generation, geothermal steam, sugar & ethanol, pulp
& paper liquor, refining, chemical processing, water & waste-
water, air separation, cryogenic services

150psi (50 – 600mm) Power, Mining, Pulp & Paper, Cement, Carbon Black, Chemi-
KNIFE GATE 50 - 1200
100psi (750 – 1200mm) cal, Wastewater

CHECK VALVE
Designed to prevent backflow of media into the stream, relying on Benefits
pressure differential to function, check valves play an important • Stable single-flow of media
role in filtration units, various appliances, and wastewater lines, • Quality-approved design
among other applications. • Tight locking mechanism

TYPE SIZE (mm) PRESSURE RATING APPLICATION

Oil and Gas Pipeline, Offshore Platforms, Onshore Terminals,

LNG storage & transportation, steam distribution systems,
SWING CHECK 50 - 900 Class 150 to Class 2500 power generation, geothermal steam, sugar & ethanol, pulp
& paper liquor, refining, chemical processing, water & waste-
water, air separation, cryogenic services

Petroleum, chemical, natural gas, petrochemical, coal

LIFT CHECK 15 - 600 Class 150 to Class 2500
chemical

Power, Mining, Pulp & Paper, Cement, Carbon Black, Chemi-

DUAL PLATE CHECK 50 - 1200 Class 150 to Class 2500
cal, Wastewater
14

GLOBE VALVE
Our globe valves have linear motion functionality and can stop,
Benefits
start, and regulate the flow of media. Predominantly used for
• Proper regulation
isolating or throttling the media flow in a pipe stream
• Efficient linear motion
• Customized options

TYPE SIZE (mm) PRESSURE RATING APPLICATION

Oil and Gas Pipeline, Offshore Platforms, Onshore Terminals,

LNG storage & transportation, steam distribution systems,
STRAIGHT PATTERN GLOBE 15 - 600 Class 150 to Class 2500 power generation, geothermal steam, sugar & ethanol, pulp
& paper liquor, refining, chemical processing, water & waste-
water, air separation, cryogenic services

Oil and Gas Pipeline, Offshore Platforms, Onshore Terminals,

LNG storage & transportation, steam distribution systems,
ANGLE GLOBE 15 - 600 Class 150 to Class 2500 power generation, geothermal steam, sugar & ethanol, pulp
& paper liquor, refining, chemical processing, water & waste-
water, air separation, cryogenic services

Oil and Gas Pipeline,steam distribution systems, power

generation, geothermal steam, pulp & paper liquor, refining,
BELLOWS SEALED GLOBE 15 - 600 Class 150 to Class 2500
chemical processing, water & wastewater like nitric acid,
acetic acid, oxidizing medium, urea

PLUG VALVE
Our plug valves utilize a cylindrical or tapered plug that can open/ Benefits
close, throttle, or divert a piping’s flow. By utilizing high-grade ma- • Easy maintenance
terials and our molds, our plug valves can satisfy various industry • Low flow resistance
requirements. • Fewer moving parts

TYPE SIZE (mm) PRESSURE RATING APPLICATION

ECCENTRIC PLUG 50 - 600 150psi to 450psi Handle clean and dirty liquids, sludge, slurries and gases

Chemical Plants, Refinery, Letal Service, Sulfur Service,

SLEEVED PLUG 15 - 400 Class 150 to Class 900
Fertilizer plant, Desalination Plant
 AIR DRYER
& COMPONENT
16

DESICCANT AIR DRYER

We offer various brands or equivalent of Atlas Copco, ZEKS, Titus Benefits
and Boge. We do maximum emphasis on quality and has a well • Quality Assurance
laid out quality system with complete traceability. Our desiccant • Parts Back up
dryers are specially-engineered for high-selectivity water and • Easily automated
vapor removal from industrial process air.

TYPE DEW POINT (°C) FLOW RATE (SCFM) APPLICATION

HEATLESS DESICCANT Pneumatic equipment, Pharmaceutical production, Chemical

-40 to -75 90 to 5000
DRYERS and petrochemical processing

HEATED DESICCANT Pneumatic equipment, Pharmaceutical production, Chemical

-40 to -75 150 to 8000
DRYERS and petrochemical processing

BLOWER PURGE DESIC- Pneumatic equipment, Pharmaceutical production, Chemical

-40 150 to 8000
CANT DRYERS and petrochemical processing

REFRIGERATED AIR DRYERS

We offer various brands or equivalent of Atlas Copco, ZEKS, Titus Benefits
and Boge. We do maximum emphasis on quality and has a well • Quality Assurance
laid out quality system with complete traceability. we offer best • Parts Back up
brands when it comes to both cycling and non-cycling refrigerated • Easily automated

TYPE DEW POINT (°C) FLOW RATE (SCFM) APPLICATION

Food and beverage production , Pharmaceutical production,

CYCLING REFRIGERATED
~3 10 to 150 Chemical processing, Manufacturing, Plastic injection and
DRYERS
molding
www.wajud.com 17

TYPE POWER (hp) FLOW RATE (SCFM) APPLICATION

Food and beverage production , Pharmaceutical production,

NON-CYCLING REFRIGER-
50 to 200 275 to 1000 Chemical processing, Manufacturing, Plastic injection and
ATED DRYERS
molding

REPLACEMENT AIR DRYER PARTS AND

ACCESSORIES
We also supplies genuine replacement parts, repair kits, desiccant, filters, and accessories for all
renown air dryer manufacturers like:
Airtek
Atlas Copco
Balston
Domnick Hunter
Finite
Gardner Denver
Hakison
Sullair
Zander
Parts such as:
• Filters
• Repair Kits
• Replacement Valves
• Electrical Parts
• Refrigerated Dryer Parts
• Miscellaneous Dryer Replacement Parts
 Source: feeco

BELT CONVEYOR
COMPONENTS
www.wajud.com 19

BELT SCRAPPER
We offer complete range of primary and secondary belt clean- Benefits
er with self adjusting spring tensioners to provide consistent • Easy installation
pressure and effective clearing. When the belt wears or jump, the • Cost-effective
scrapper follows to ensure good contact. • Best stability

TYPE BELT WIDTH (mm) BELT SPEED (m/s) MATERIAL HUMIDITY WORKING TEMP (°C)

PRIMARY POLYURETHANE
450 to 2400 ≤3.5 ≤15% -40 to 90
BELT CLEANER

SECONDARY
POLYURETHANE BELT 450 to 2400 ≤3.5 ≤15% -40 to 90
CLEANER

FINGER BELT SECONDARY

450 to 2400 ≤3.5 ≤15% -40 to 90
CLEANER

VEE PLOUGH BELT

450 to 2400 ≤3.5 ≤15% -40 to 90
CLEANER

H-TYPE PRIMARY ALLOY

CLEANER (only work with 450 to 2400 ≤3.5 ≤15% -40 to 90
vulcanized belt)

P-TYPE SECONDARY ALLOY

CLEANER (only work with 450 to 2400 ≤3.5 ≤15% -40 to 90
vulcanized belt)

BELT SCRAPER BLADES

We supply replacement belt scrapper blades for various brand like Benefits
Bentech, Breklo, etc. We have carefully selected manufacturers to • Reduce blade-edge bull-nos-
get you high-performance urethane developed scrapper blades. ing
• Prevent blade separating
and splitting
20

TYPE TECHNICAL DATA APPLICATION

Appropriate for 90% of applications

STANDARD CONVEYOR
Acid-resistant Coke, coal, steel/ore
SCRAPER BLADE
Temperature Rating: -30° to 70°C

CHEMICAL RESISTANT
CONVEYOR SCRAPER Temperature Rating: -40° to 75°C Limestone
BLADE

ABRASION RESISTANT
CONVEYOR SCRAPER Temperature Rating: -6° to 70°C Hard rock, dry sand
BLADE

BELT SUPPORT SYSTEM

Conveyor belt support system designed to withstand the force of Benefits
falling material at transfer points, minimizing damage and exces- • As per customer specifica-
sive wear to the belt and structure. This also cuts down on fugitive tion
material and runaway dust. • Low friction
• Impact absorbing

IMPACT BAR
Impact bar is composed of three parts: UHMWPE sheet, Cushion- Benefits
ing rubber, Alloy framework. These three parts are closely jointed • As per customer specifica-
by hot vulcanization process which makes sure the impact bar is tion
integrated so well, that there is no possibility of separation. • Low friction
• Impact absorbing

TYPE WIDTH (mm) HEIGHT (mm) LENGHT (mm)

100 55 1220

IMPACT BAR 100 75 1220/1400/1500/2000

280 100 1085

www.wajud.com 21

CERAMIC RUBBER COMPOSITE LINER

The thickness of complete liner, ceramic and rubber are deter- Benefits
mined on the basis of application, such as handled material lump • High Alumina Ceramic
size, height of fall, impact angle, we ensure that your selection are • Superior rubber compound
crafted with the highest quality and reliability. Ceramics will stay • Various size availability
in place until.

SIZE OF CERAMIC STEEL PLATE CYLINDRICAL CERAMIC

PATTERN WAJUD NO. SIZE OF LINER (mm)
TILE (mm) THICKNESS (mm) SIZE (mm)

DB-TCM-I 17.9 x 17.9 x 5 250 x 250 x 16 - -

250 x 250 x 36,

DB-TCM-II - 6 Φ20 x 20
300 x 300 x 36, etc.

250 x 250 x 51,

DB-TCM-III - 300 x 300 x 51, 6 Φ31 x 31
500 x 500 x 51, etc.

300 x 300 x 35,

50 x 50 x 25 300 x 300 x 63,
DB-TCM-IV 6 -
50 x 50 x 50 500 x 500 x 35,
500 x 500 x 63, etc.

DB-TCM-V 20 x 20 x 4 500 x 500 x 8 as per request -

DB-TCM-VI - 500 x 500 6, 10, 13, 20, 25, etc. -

22

BELT TRACKER
Due to the unique, perfectly sealed swivel bearing, the wear-re- Benefits
sistant diamond profiled rollers and a sophisticated design that • low in maintenance costs
prevents build-up of dirt, our belt tracker remains operational • Seamless and permanent
under all conditions. bond

TYPE DESCRIPTION TECHNICAL DATA

The trough tracker roller system comes in various

type and effectively corrects misalignment in the Speed (max): 4.6 m/s
TROUGH BELT TRACKER
carrying part. It can be fitted both corrective and for belt width: upto 1800 mm
preventive.

A centered belt run in the return strand, especially

for the tail drum, is of the utmost importance. The
Speed (max): 4.6 m/s
RETURN BELT TRACKER tracker roller system effectively corrects misalign-
for belt width: upto 1800 mm
ment of conveyor belts in the return part. It can be
fitted both corrective and preventive.

Inversed belt tracker was developed to prevent

tracker from completely blocked by the carry-back.
cupped conveyor belt in the return or an extremely
INVERSED BELT TRACKER -
dirty return strand causes high wear on the rollers
of the belt tracker. In addition, a tracker roller acts
as a scraper.

Designed with a triple labyrinth seal, our rollers have

advanced sealing protection and are sealed for life
STEEL & RETURN ROLLERS bearings that never require regreasing. Available Belt widths: 609.6mm to 1828.8mm
in various belt widths and sizes, meeting all CEMA
standards

Troughing idlers are used to transition from an

impact area or load zone. They can also be used to Belt widths: 609.6mm to 1828.8mm
TROUGHING IDLER
transition from a flat pulley area, picking or feeding Troughing angles: 20, 35, & 45 degree
area

Return idlers are used to carry the belt back to the

tail pulley after the load has been dumped at the
RETURN IDLER Belt widths: 609.6mm to 1828.8mm
head pulley. Designed to meet CEMA standards and
available in different belt widths

The Training Idler responds instantly to the misalign-

ment of the belt without special modifications to the
TRAINING IDLER structure. It requires no maintenance and fits into -
a standard drop bracket. The Training Idler can be
manufactured to suit all belt sizes in operation
www.wajud.com 23

CHUTE SEALING SYSTEM

We offer various types of chute sealing system each designed Benefits
to hold material on on conveyor belt and prevent loading zone • Abrasion-resistant
spillage also avoding belt from any kind of damage. All our sealing • Longer service life
system comes with easy to install instructions. • Better containment

TYPE DESCRIPTION TECHNICAL DATA

Double-layer structure, inside layer keeps material,

outside layer prevents dust-leakage. Clamp units are Thickness: 14±1mm
DUAL SEAL SKIRT BOARD easy to install, adjust and maintain. Height: 150mm, 190mm
Can be formulated to wrok in wet or dry 63 Shore A
conditions.

Designed to have a low coefficient of friction which

reduces drag. Has a high tensile strength resulting Color: Black or Orange
T TYPE RUBBER SKIRT in longer wear and less tearing compared. Available Temperature Range (°C): -40 to 90
with 35° on one side and 90º on the other. Sold in 63 Shore A
rolls.

Effective and economical upgrade that protects and

On Request: manufactured from
improves the conveyor skirtboards and sealing sys-
SKIRTBOARD/WEAR mild steel, AR 400 or 500 abra-
tem. These are mounted on the outside of skirtboard
LINERS sion-resistant plates or stainless
allowing for ease of inspection and replacement of
steel
liners when required.

AIR CANNON
Our air cannon or blaster is a revolutionary and reliable air can- Benefits
non system to improve material flow as a cost-effective solution • Added durability
for removing build up and blockages occurring in silos, hoppers, • Can retrofit any existing air
kilns pre-heater, cyclones, kilns and other industrial machinery. blaster

TYPE ACCESSOIRES APPLICATION

5 TO 25 LITERS AVAILABLE IN 50MM

PIPE DIAMETERS

Coal Mining and Processing

Steel
Mining
50 TO 350 LITERS AVAILABLE IN Coal-Fired Power Plants
Valve, Jets, Control units
100MM PIPE DIAMETERS Recycling and Waste Management
Cement
Ports and Terminals
Fertilizer

100 TO 600 LITERS AVAILABLE IN

150MM PIPE DIAMETERS
24

SAFETY CONTROLS
Safety Controls include safety stop switches, pull cords, belt align- Benefits
ment controls, damaged belt detectors, bucket elevator alignment • IP65 compliant
controls and bulk material flow controls. • Corrosion resistance
• Longer service life

TYPE DESCRIPTION TECHNICAL DATA

Model RS is a heavy-duty safety control (stop switch)

SP/DT microswitch: 20A @ 120 VAC,
that provides a positive shut off of dangerous equip-
240VAC, and 480 VAC 1/2 amp at 125
ment in an emergency. A cable pulled by endangered
MODEL RS VDC and 1/4 amp at 250 VDC.
personnel actuates the control. The output contacts
(SAFETY STOP CONTROL) DP/DT microswitch: 15A @ 120 VAC,
of the Model RS-2 can control up to two separate
240VAC; 3/4 HP at 125 VAC, 1-1/2 HP
circuits, one for machinery shutdown and one for an
at 250 VAC.
alarm

Model RSB is a heavy-duty safety control (stop

switch) that provides a positive shut off of dangerous SP/DT microswitch: 20A @ 120 VAC,
MODEL RSB equipment in an emergency. A cable pulled by en- 240VAC, and 480 VAC 1/2 amp at 125
(SAFETY STOP CONTROL dangered personnel actuates it. The output contacts VDC and 1/4 amp at 250 VDC.
WITH CABLE BREAK DE- of the Model RS can control up to two separate DP/DT microswitch: 15A @ 120 VAC,
TECTION) circuits, one for machinery shutdown and one for an 240VAC; 3/4 HP at 125 VAC, 1-1/2 HP
alarm.The Model RSB has the built-in advantage of at 250 VAC.
cable break detection.

The Model TA is a belt mis-alignment control that

provides an indication when a conveyor belt has SP/DT microswitch: 20A @ 120 VAC,
MODEL TA
drifted off to a dangerous misalignment condition. 240 VAC, and 480 VAC.
(BELT ALIGNMENT CON-
The output contacts of the Model TA can control up TP/TT microswitch: 15A @ 120 VAC,
TROL)
to two separate circuits, one for machinery shutdown 240 VAC, 480 VAC and 600 VAC
and one for an alarm.

The Model PC is a rugged safety switch that provides

SP/DT microswitch: 20A @ 120 VAC,
a quick positive shut off of dangerous equipment in
240VAC, and 480 VAC 1/2 amp at 125
emergencies or normal operation. It is actuated by
MODEL PC VDC and 1/4 amp at 250 VDC.
cable pulled by endangered personnel. The output
(PULLCORD SWITCH) DP/DT microswitch: 15A @ 120 VAC,
contacts of the Model PC can control up to two
240VAC; 3/4 HP at 125 VAC, 1-1/2 HP
separate circuits, one for machinery shutdown and
at 250 VAC.
one for alarm

The Model DB is a cable operated damaged belt de-

tector that looks for punctures, tears, or protrusions
MODEL DB SP/DT microswitch: 20A @ 120 VAC,
through the conveyor belt and provides a means of
(DAMAGED BELT 240VAC, and 480 VAC.
automatic shutdown to limit the amount of damage
DETECTOR / BELT RIP DP/DT microswitch: 240VAC; 3/4 HP
to the conveyor belt. The output contacts of the
DETECTOR) at 125 VAC, 1-1/2 HP at 250 VAC.
Model DB can control up to two separate circuits, one
for machinery shutdown and one for an alarm

The Model CMS is a direct drive control that indicates

when rotating equipment has ceased to turn. The
MODEL CMS DP/DT relay: 3A @ 120 VAC, 240 VAC,
output contacts of the Model CMS can control up to
(ZERO SPEED CONTROL) and 480 VAC
two separate circuits, one for machinery shutdown
and one for an alarm

The Model BA is a heavy-duty conveyor belt

mis-alignment switch that either provides an indi-
MODEL BA cation or a shut off of the conveyor during a drift
Rugged 3-1/8” diameter roller with
(BELT ALIGNMENT CON- condition in order to prevent further damage to the
enclosed S.S. ball bearings
TROL) conveyor belt. The output contacts of the Model
BA can control up to two separate circuits, one for
conveyor shutdown and one for an alarm

The Model VA is the newest belt alignment control

specifically designed for use with bucket elevators.
The unit is typically used in pairs to provide protec-
Model VA tion to both sides of the elevator leg, and indicates
Microswitch: for 10A @ 120 VAC, 240
(Bucket Elevator Align- when the vertical belt strays or drifts beyond
VAC, and 480 VAC
ment Control) acceptable limits. After such time, the unit will trip
an output to indicate a problem, or can be used to
shut down the leg until inspection and correction is
provided
MINING MACHINERY
& SPARE PARTS
26

EQUIPMENT SALE
We partner with various clients across the globe to
provide wide range of used and refurbished heavy Benefits
equipment machinery at competitive prices. used • Competitive price
excavators, loaders, backhoes, dozers, rollers and • After sale service
more. Some of recent machineries we dealt with are • Complete disclousre
mentioned below.

TYPE DESCRIPTION

• Very good condition

• Fully functional
KOMATSU HD785-5 • Engine SA12V140
• Year 2004

Sold to Ritchie Bros, UAE

• Very good condition

• Fully functional
KOMATSU HD785-5 • Engine SA12V140
• Year 2003

Sold to Ritchie Bros, UAE

• Very good condition

• Fully functional
CATERPILLAR 320L • with Bucket
• Year 2005

Sold to Drum City, Zimbabwe

www.wajud.com 27

TYPE DESCRIPTION

• Very good condition

• Fully functional
• with Bucket
CATERPILLAR 966G
• Year 2005

Sold to Drum City, Zimbabwe

• Very good condition

• Fully functional
• with Bucket
KOMATSU PC400-6Z
• Year 2003

Sold to DEM, Mozambique

We provide various option such as

above that includes rebuld, used or
new machinery to meet customer
requirements.
28

MACHINERY PARTS
We offer precision engineered replacement parts for
Caterpillar®, Kotmasu®, Volvo CE® and JCB®. From in- Benefits
frame engine kits and cylinder kits to a full line of • Competitive price
individual parts for fuel, air, lubrication and cooling • After sale service
systems, Wajud offer the best technologies for re- • Genuine or Replace-
placement parts for heavy-duty engine applications. ment

PARTS TYPES

ENGINE COMPRESSOR GASKET FUEL INJECTION ELECTRICAL

COOLING POWER TRAIN

ENGINE SERIES:

Komatsu® engines: Caterpillar® engines: Volo CE® engines:

• 4D895 Series • 3064/3066 • D16J
• 6D95 Series • 3114/3116 • D13J
• 4D103 Series • 3126 • D8J
• 6D102 Series • 3200 • D6J
• 4D105 Series • 3300 • D4
• 6D105 Series • 3400 • D11M
• 6D114 Series • 3500 • Cummins QST30
• 6D125 Series • 3600 • Cummins QSK19
• 6D155 Series • G Series • MTU 2000 Series
• PC Series • D Series
• NH200/773 Series • C Series
• NT855 Series
• K19 Series
• K38 Series
• K1150 Series
www.wajud.com 29

UNDERCARRIAGE
Our undercarriage line includes a vast range of compo-
nents such as chains, shoes, rollers, sprockets, idlers and Benefits
segments. We offer most complete range of quality un- • Competitive price
dercarriage on the market. In addition to standard exca- • After sale service
vator and dozer applications, the undercarriage line cov- • Genuine or Replace-
ers asphalt road paving, drilling, and logging machines ment

Undercarriage parts and components work as a system to move the machine in any type
of terrain. We produces high quality undercarriage parts to keep your heavy machin-
ery running productively without delays. Undercarriage parts can account for a large
amount of the repair investment you make over the life of the machine. For this reason,
We offer the highest quality undercarriage replacement parts, while giving customers
the ability to obtain significant savings to reduce repairs cost on their machine.
30

GROUND ENGAGING TOOLS

Wajud design and manufacture innovative G.E.T. sys- Benefits
tems for earthmoving machinery buckets to ensure our • Competitive price
clients obtain the maximum productivity from their ma- • After sale service
chines while ensuring maximum reliability and safety. • Genuine or Replace-
ment

Teeth Range

STANDARD UNIVERSAL CHISEL

Adaptor Range

CATERPILLAR KOMATSU VOLVO

www.wajud.com 31

RIPPER VECTOR ABRASION PENETRATION

JCB HYUNDAI DAEWOO ESCO

The alloys used to designed the tools are to withstand

the highest levels of mechanical stress when operated.
Our steels maximize the hardness/toughness combina-
tion due to their low level of impurities and structure
which is developed using specific heat treatments.
32

UNDERGROUND MACHINERY
We offer precision- engineered replacement and OEM
Benefits
parts for Sandvik®, Atlas Copco® and GHH®. We have
• Competitive price
years of experience in hydraulic rock breakers In-depth
• After sale service
knowledge of shock wave transmission theory that al-
• Genuine or Replace-
lows us to provide you with the best suited products
ment

MACHINERY WE COVER:
Sandvik®: GHH®:
• Drill Rig • Loader
• DD420 (Axera) • LF-10
• DD310 • LF-11H
• DD210 • LF-12H
• DS420 • SLP-5
• DS320 • SLP-6
• Loader • SLP-8
• LH208 • SLP-10
• LH202
• Dumper
• TH320
• TH315

PARTS TYPE:

DRIFTER DRILLING FRAME ENGINE

BOOM AXLE GEARBOX BUCKET

www.wajud.com 33

DRIFTER
Our relationship with renown manufacturing and
engineering industries with modern technology, al-
low us to offer hydraulic drifters with:
• Better efficiency
• Better energy transmission to the bits
• Optimum shock wave transmission
• Tool extraction in fractured ground

We also supply various ranges of rock drill drifter spare

parts engineered to meet the highest standards for Atlas
Copco, Furukawa and Sandvik.

Sandvik (Rock Drill) Drifters spares

RD314 – H200 – HLX 1 – HLX5 – HL510 – HL600 – HL800 –
HL1060 – HL1500 – HL1560 – RD1840C

Atlas Copco drifters spares

COP 1838 – COP 1840

Furukawa Drifters spares

HD-700 Series and HD-800 Series

HLX5 RD314 COP 1838

The alloys used to design the

tools are to withstand the
highest levels of mechanical
stress when operated, pro-
COP 1132 HL710 viding straight holes drilling.
TYRE PROTECTION CHAIN
& COMPONENT
www.wajud.com 35

TYRE PROTECTION
CHAIN
Our tyre protection chain is steel mesh of high qual-
ity casted, forged and hardend with fine grain alloy,
resulting excellent tread protection. The flexible design
of the chain let itself adjust to every tyre deformation to
provide robust traction even in the difficult condition.
Benefits
LINK DESIGN SAMPLE
• Reducing operating cost
• Lowering downtime
• increasing productivity

M-60-F

GDD-F-18

Tyre 17.5R25 Tyre 29.5R29 D-SDT-18

Link diameter 13mm Link diameter 18mm
ZL-30, WA 150, & VOLVO L60F ST 1810, HSW 560, CAT 2900

E-SG-16

S-JGM-14

Tyre 14.00R24 Tyre 23.5R25

CAT1300G, ST 7, Sandvik LH203, Link diameter 16mm/13mm
LH307 CAT 960, Komatsu WA380

We provide various type of mesh design

on demand such as hexa, square,
compact cross, quad cross, etc.
BRANDS WE COVER
We work with various manufacturers and suppliers for renown brand. As
we cannot cover everyone one of them in this summary brochure. How-
ever we have mentioned majority of our top traded brands.
WE UNDERSTAND THE RISK,
SO WE MAKE SURE
WE DELIVER.
UAE
RA08-CB04
JAFZA
+971 488 25300
+971 564 898528

www.wajud.com
[email protected]